The original %b description string is wrong.
Sponsored by: The FreeBSD Foundation
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D30805
- Use malloc(9) to allocate ivhd_hdrs list. The previous assumption
that there are at most 10 IVHDs in a system is not true. A counter
example would be a system with 4 IOMMUs, and each IOMMU is related
to IVHDs type 10h, 11h and 40h in the ACPI IVRS table.
- Always scan through the whole ivhd_hdrs list to find IVHDs that has
the same DeviceId but less prioritized IVHD type.
Sponsored by: The FreeBSD Foundation
MFC with: 74ada297e8
Reviewed by: grehan
Approved by: lwhsu (mentor)
Differential Revision: https://reviews.freebsd.org/D29525
This fixes double IVHD_SETUP_INTR calls on the same IOMMU device.
Sponsored by: The FreeBSD Foundation
MFC with: 74ada297e8
Reported by: Oleg Ginzburg <olevole@olevole.ru>
Reviewed by: grehan
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D29521
Currently, AMD-vi PCI-e passthrough will lead to the following lines in
dmesg:
"kernel: CPU0: local APIC error 0x40
ivhd0: Error: completion failed tail:0x720, head:0x0."
After some tracing, the problem is due to the interaction with
amdvi_alloc_intr_resources() and pci_driver_added(). In ivrs_drv, the
identification of AMD-vi IVHD is done by walking over the ACPI IVRS
table and ivhdX device_ts are added under the acpi bus, while there are
no driver handling the corresponding IOMMU PCI function. In
amdvi_alloc_intr_resources(), the MSI intr are allocated with the ivhdX
device_t instead of the IOMMU PCI function device_t. bus_setup_intr() is
called on ivhdX. the IOMMU pci function device_t is only used for
pci_enable_msi(). Since bus_setup_intr() is not called on IOMMU pci
function, the IOMMU PCI function device_t's dinfo->cfg.msi is never
updated to reflect the supposed msi_data and msi_addr. So the msi_data
and msi_addr stay in the value 0. When pci_driver_added() tried to loop
over the children of a pci bus, and do pci_cfg_restore() on each of
them, msi_addr and msi_data with value 0 will be written to the MSI
capability of the IOMMU pci function, thus explaining the errors in
dmesg.
This change includes an amdiommu driver which currently does attaching,
detaching and providing DEVMETHODs for setting up and tearing down
interrupt. The purpose of the driver is to prevent pci_driver_added()
from calling pci_cfg_restore() on the IOMMU PCI function device_t.
The introduction of the amdiommu driver handles allocation of an IRQ
resource within the IOMMU PCI function, so that the dinfo->cfg.msi is
populated.
This has been tested on EPYC Rome 7282 with Radeon 5700XT GPU.
Sponsored by: The FreeBSD Foundation
Reviewed by: jhb
Approved by: philip (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28984
We want to allow the UEFI firmware to enumerate and assign
addresses to PCI devices so we can boot from NVMe[1]. Address
assignment of PCI BARs is properly handled by the PCI emulation
code in general, but a few specific cases need additional support.
fbuf and passthru map additional objects into the guest physical
address space and so need to handle address updates. Here we add a
callback to emulated PCI devices to inform them of a BAR
configuration change. fbuf and passthru then watch for these BAR
changes and relocate the frame buffer memory segment and passthru
device mmio area respectively.
We also add new VM_MUNMAP_MEMSEG and VM_UNMAP_PPTDEV_MMIO ioctls
to vmm(4) to facilitate the unmapping needed for addres updates.
[1]: https://github.com/freebsd/uefi-edk2/pull/9/
Originally by: scottph
MFC After: 1 week
Sponsored by: Intel Corporation
Reviewed by: grehan
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D24066
One common method of EOI'ing an interrupt at the IO-APIC level is to
switch the pin to edge triggering mode and then back into level mode.
That would cause the IRR bit to be cleared and thus further interrupts
to be injected. FreeBSD does indeed use that method if the IO-APIC EOI
register is not supported.
The bhyve IO-APIC emulation code didn't clear the IRR bit when doing
that switch, and was also missing acknowledging the IRR state when
trying to inject an interrupt in vioapic_send_intr.
Reviewed by: grehan
Differential revision: https://reviews.freebsd.org/D28238
After modifying a redirection entry only try to inject an interrupt if
the pin is in level mode, pins in edge mode shouldn't take into
account the line assert status as they are triggered by edge changes,
not the line status itself.
Reviewed by: grehan
Differential revision: https://reviews.freebsd.org/D28237
vioapic_send_intr does already check whether the pin is masked before
injecting the interrupt, there's no need to do it in vioapic_write
also.
No functional change intended.
Reviewed by: grehan
Differential revision: https://reviews.freebsd.org/D28236
We use 4-level EPT pages, correct the upper bound.
Reviewed by: grehan
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27402
There is no need for these to be function pointers since they are
never modified post-module load.
Rename AMD/Intel ops to be more consistent.
Submitted by: adam_fenn.io
Reviewed by: markj, grehan
Approved by: grehan (bhyve)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D27375
This is a relic from when these instructions weren't supported by the toolchain.
No functional change.
Submitted by: adam_fenn.io
Reviewed by: grehan
Approved by: grehan (bhyve)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D27130
This reduces some code duplication. One behavior change is that
ppt_assign_device() will now only succeed if the device is unowned.
Previously, a device could be assigned to the same VM multiple times,
but each time it was assigned, the device's state was reset.
Reviewed by: markj, grehan
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27301
Add a new ioctl to disable all MSI-X interrupts for a PCI passthrough
device and invoke it if a write to the MSI-X capability registers
disables MSI-X. This avoids leaving MSI-X interrupts enabled on the
host if a guest device driver has disabled them (e.g. as part of
detaching a guest device driver).
This was found by Chelsio QA when testing that a Linux guest could
switch from MSI-X to MSI interrupts when using the cxgb4vf driver.
While here, explicitly fail requests to enable MSI on a passthrough
device if MSI-X is enabled and vice versa.
Reported by: Sony Arpita Das @ Chelsio
Reviewed by: grehan, markj
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27212
Currently EPT TLB invalidation is done by incrementing a generation
counter and issuing an IPI to all CPUs currently running vCPU threads.
The VMM inner loop caches the most recently observed generation on each
host CPU and invalidates TLB entries before executing the VM if the
cached generation number is not the most recent value.
pmap_invalidate_ept() issues IPIs to force each vCPU to stop executing
guest instructions and reload the generation number. However, it does
not actually wait for vCPUs to exit, potentially creating a window where
guests may continue to reference stale TLB entries.
Fix the problem by bracketing guest execution with an SMR read section
which is entered before loading the invalidation generation. Then,
pmap_invalidate_ept() increments the current write sequence before
loading pm_active and sending IPIs, and polls readers to ensure that all
vCPUs potentially operating with stale TLB entries have exited before
pmap_invalidate_ept() returns.
Also ensure that unsynchronized loads of the generation counter are
wrapped with atomic(9), and stop (inconsistently) updating the
invalidation counter and pm_active bitmask with acquire semantics.
Reviewed by: grehan, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26910
Rewrite the code that maintains pm_active and invalidates EPTP-tagged
TLB entries in C. Previously this work was done in vmx_enter_guest(),
in assembly, but there is no good reason for that and it makes the TLB
invalidation algorithm for nested page tables harder to review.
No functional change intended. Now, an error from the invept
instruction results in a kernel panic rather than a vmexit. Such errors
should occur only as a result of VMM bugs.
Reviewed by: grehan, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26830
Per the Intel manuals, CPUID is supposed to unconditionally zero the
upper 32 bits of the involved (rax/rbx/rcx/rdx) registers.
Previously, the emulation would cast pointers to the 64-bit register
values down to `uint32_t`, which while properly manipulating the lower
bits, would leave any garbage in the upper bits uncleared. While no
existing guest OSes seem to stumble over this in practice, the bhyve
emulation should match x86 expectations.
This was discovered through alignment warnings emitted by gcc9, while
testing it against SmartOS/bhyve.
SmartOS bug: https://smartos.org/bugview/OS-8168
Submitted by: Patrick Mooney
Reviewed by: rgrimes
Differential Revision: https://reviews.freebsd.org/D24727
Intercept and report #UD to VM on SVM/AMD in case VM tried to execute an
SVM instruction. Otherwise, SVM allows execution of them, and instructions
operate on host physical addresses despite being executed in guest mode.
Reported by: Maxime Villard <max@m00nbsd.net>
admbug: 972
CVE: CVE-2020-7467
Reviewed by: grehan, markj
Differential revision: https://reviews.freebsd.org/D26313
Since LA57 was moved to the main SDM document with revision 072, it
seems that we should have a support for it, and silicons are coming.
This patch makes pmap support both LA48 and LA57 hardware. The
selection of page table level is done at startup, kernel always
receives control from loader with 4-level paging. It is not clear how
UEFI spec would adapt LA57, for instance it could hand out control in
LA57 mode sometimes.
To switch from LA48 to LA57 requires turning off long mode, requesting
LA57 in CR4, then re-entering long mode. This is somewhat delicate
and done in pmap_bootstrap_la57(). AP startup in LA57 mode is much
easier, we only need to toggle a bit in CR4 and load right value in CR3.
I decided to not change kernel map for now. Single PML5 entry is
created that points to the existing kernel_pml4 (KML4Phys) page, and a
pml5 entry to create our recursive mapping for vtopte()/vtopde().
This decision is motivated by the fact that we cannot overcommit for
KVA, so large space there is unusable until machines start providing
wider physical memory addressing. Another reason is that I do not
want to break our fragile autotuning, so the KVA expansion is not
included into this first step. Nice side effect is that minidumps are
compatible.
On the other hand, (very) large address space is definitely
immediately useful for some userspace applications.
For userspace, numbering of pte entries (or page table pages) is
always done for 5-level structures even if we operate in 4-level mode.
The pmap_is_la57() function is added to report the mode of the
specified pmap, this is done not to allow simultaneous 4-/5-levels
(which is not allowed by hw), but to accomodate for EPT which has
separate level control and in principle might not allow 5-leve EPT
despite x86 paging supports it. Anyway, it does not seems critical to
have 5-level EPT support now.
Tested by: pho (LA48 hardware)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25273
Recent versions of UEFI have moved local APIC timer initialization into
the early SEC phase which runs out of ROM, prior to self-relocating
into RAM. This results in a hypervisor exit.
Currently bhyve prevents instruction emulation from segments that aren't
marked as "sysmem" aka guest RAM, with the vm_gpa_hold() routine failing.
However, there is no reason for this restriction: the hypervisor already
controls whether EPT mappings are marked as executable.
Fix by dropping the redundant check of sysmem.
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D25955
If userspace has a newer bhyve than the kernel, it may be able to decode
and emulate some instructions vmm.ko is unaware of. In this scenario,
reset decoder state and try again.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D24464
Expose the special kernel LAPIC, IOAPIC, and HPET devices to userspace
for use in, e.g., fallback instruction emulation (when userspace has a
newer instruction decode/emulation layer than the kernel vmm(4)).
Plumb the ioctl through libvmmapi and register the memory ranges in
bhyve(8).
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D24525
In recent Linux (5.3+) and OpenBSD (6.6+) kernels, and with hosts that
support CPUID 0x15, the local APIC frequency is determined directly
from the reported crystal clock to avoid calibration against the 8254
timer.
However, the local APIC frequency implemented by bhyve is 128MHz, where
most h/w systems report frequencies around 25MHz. This shows up on
OpenBSD guests as repeated keystrokes on the emulated PS2 keyboard
when using VNC, since the kernel's timers are now much shorter.
Fix by reporting all-zeroes for CPUID 0x15. This allows guests to fall
back to using the 8254 to calibrate the local APIC frequency.
Future work could be to compute values returned for 0x15 that would
match the host TSC and bhyve local APIC frequency, though all dependencies
on this would need to be examined (for example, Linux will start using
0x16 for some hosts).
PR: 246321
Reported by: Jason Tubnor (and tested)
Reviewed by: jhb
Approved by: jhb, bz (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D24837
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed. In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken). A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.
To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.
While the current implementation is useful for several uses cases, it
has a few limitations. The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system). In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions. The file format also does not currently support
versioning of individual chunks of state. As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files. The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility. As a result, the current implementation is not enabled
by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.
Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes: yes
Sponsored by: University Politehnica of Bucharest
Sponsored by: Matthew Grooms (student scholarships)
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D19495
As a short term solution for the problem reported by Shawn Webb re: r359950,
bump the maximum number of memmaps per VM. This structure is 40 bytes, and the
additional four (fixed array embedded in the struct vm) members increase the
size of struct vm by 3%.
(The vast majority of struct vm is the embedded struct vcpu array, which
accounts for 84% of the size -- over 4 kB.)
Reported by: Shawn Webb <shawn.webb AT hardenedbsd.org>
Reviewed by: grehan
X-MFC-With: r359950
Differential Revision: https://reviews.freebsd.org/D24507
Permit instruction decoding logic to be compiled outside of the kernel for
rapid iteration and validation.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D24439
This speeds up Windows guests tremendously.
The patch does:
Add a new tuneable 'hw.vmm.vmx.use_tpr_shadowing' to disable TLP shadowing.
Also add 'hw.vmm.vmx.cap.tpr_shadowing' to be able to query if TPR shadowing is used.
Detach the initialization of TPR shadowing from the initialization of APIC virtualization.
APIC virtualization still needs TPR shadowing, but not vice versa.
Any CPU that supports APIC virtualization should also support TPR shadowing.
When TPR shadowing is used, the APIC page of each vCPU is written to the VMCS_VIRTUAL_APIC field of the VMCS
so that the CPU can write directly to the page without intercept.
On vm exit, vlapic_update_ppr() is called to update the PPR.
Submitted by: Yamagi Burmeister
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22942
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Reviewed by: kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23625
X-Generally looks fine: jhb
- Allow the userland hypervisor to intercept breakpoint exceptions
(BP#) in the guest. A new capability (VM_CAP_BPT_EXIT) is used to
enable this feature. These exceptions are reported to userland via
a new VM_EXITCODE_BPT that includes the length of the original
breakpoint instruction. If userland wishes to pass the exception
through to the guest, it must be explicitly re-injected via
vm_inject_exception().
- Export VMCS_ENTRY_INST_LENGTH as a VM_REG_GUEST_ENTRY_INST_LENGTH
pseudo-register. Injecting a BP# on Intel requires setting this to
the length of the breakpoint instruction. AMD SVM currently ignores
writes to this register (but reports success) and fails to read it.
- Rework the per-vCPU state tracked by the debug server. Rather than
a single 'stepping_vcpu' global, add a structure for each vCPU that
tracks state about that vCPU ('stepping', 'stepped', and
'hit_swbreak'). A global 'stopped_vcpu' tracks which vCPU is
currently reporting an event. Event handlers for MTRAP and
breakpoint exits loop until the associated event is reported to the
debugger.
Breakpoint events are discarded if the breakpoint is not present
when a vCPU resumes in the breakpoint handler to retry submitting
the breakpoint event.
- Maintain a linked-list of active breakpoints in response to the GDB
'Z0' and 'z0' packets.
Reviewed by: markj (earlier version)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D20309
No need to log all the commands in command ring but only the last one for which completion failed.
Reported by: np@freebsd.org
Reviewed by: np, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22566
After removing wmb(), vm_set_rendezvous_func() became super trivial, so
there was no point in keeping it.
The wmb (sfence on amd64, lock nop on i386) was not needed. This can be
explained from several points of view.
First, wmb() is used for store-store ordering (although, the primitive
is undocumented). There was no obvious subsequent store that needed the
barrier.
Second, x86 has a memory model with strong ordering including total
store order. An explicit store barrier may be needed only when working
with special memory (device, special caching mode) or using special
instructions (non-temporal stores). That was not the case for this
code.
Third, I believe that there is a misconception that sfence "flushes" the
store buffer in a sense that it speeds up the propagation of stores from
the store buffer to the global visibility. I think that such
propagation always happens as fast as possible. sfence only makes
subsequent stores wait for that propagation to complete. So, sfence is
only useful for ordering of stores and only in the situations described
above.
Reviewed by: jhb
MFC after: 23 days
Differential Revision: https://reviews.freebsd.org/D21978
