The rationale is pretty much the same as in r353747.
There is no subsequent dependent store.
The store is to the regular (TSO) memory anyway.
MFC after: 23 days
Rather than a few scattered places in the tree. Organize flag names in a
contiguous region of specialreg.h.
While here, delete deprecated PCOMMIT from leaf 7.
No functional change.
The former spelling probably confused MOVDIR64B with MOVDIRI64.
MOVDIR_64B is the 64-*byte* direct store instruction; MOVDIR_I64 is the
64-*bit* direct store instruction (underscores added here for clarity; they are
not part of the canonical instruction name).
No functional change.
Sponsored by: Dell EMC Isilon
ABI already guarantees the direction is forward. Note this does not take care
of i386-specific cld's.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21906
Convert all remaining references to that field to "ref_count" and update
comments accordingly. No functional change intended.
Reviewed by: alc, kib
Sponsored by: Intel, Netflix
Differential Revision: https://reviews.freebsd.org/D21768
leaf 0x15 is not functional.
This should improve automatic TSC frequency determination on
Skylake/Kabylake/... families, where 0x15 exists but does not provide
all necessary information. SDM contains relatively strong wording
against such uses of 0x16, but Intel does not give us any other way to
obtain the frequency. Linux did the same in the commit
604dc9170f2435d27da5039a3efd757dceadc684.
Based on submission by: Neel Chauhan <neel@neelc.org>
PR: 240475
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D21777
doing so adds more flexibility with less redundant code.
Reviewed by: jhb, markj, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21250
Move the floppy driver to the x86 specific notes file.
Reviewed by: jhb, manu, jhibbits, emaste
Differential Revision: https://reviews.freebsd.org/D21208
x86 needs sc, as does sparc64. powerpc doesn't use it by default, but some old
powermac notebooks do not work with vt yet for reasons unknonw. Even so, I've
removed it from powerpc LINT. It's not in daily use there, and the intent is to
100% switch to vt now that it works for that platform to limit support burden.
All the other architectures omit some or all of the screen savers from their
lint config. Move them to the x86 NOTES files and remove the exclusions. This
reduces slightly the number of savers sparc64 compiles, but since they are in
GENERIC, the overage is adequate and if someone reaelly wants to sort them out
in sparc64 they can sweat the details and the testing.
Reviewed by: jhb (earlier version), manu (earlier version), jhibbits
Differential Revision: https://reviews.freebsd.org/D21233
Depending on system configuration, version, and architecture,
mds_handler might be dereferenced from doreti before
hw_mds_recalculate_boot() initialized it. Statically assign void
method to cover all cases.
Reported by: "Schuendehuette, Matthias (LDA IT PLM)" <matthias.schuendehuette@siemens.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
that it becomes increasingly expensive to process a steady stream of
correctable errors. Additionally, the memory used by the MCA entries can
grow without bound.
Change the code to maintain two separate lists: a list of entries which
still need to be logged, and a list of entries which have already been
logged. Additionally, allow a user-configurable limit on the number of
entries which will be saved after they are logged. (The limit defaults
to -1 [unlimited], which is the current behavior.)
Reviewed by: imp, jhb
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20482
This is needed for AMD SMCA processors, as SMCA uses different
MSR address for access MCA banks.
Use IA32 specific msr_ops as defualt, and use SMCA-specific msr_ops
when on an SMCA-enabled processor
Submitted by: chandu from amd dot com
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D18055
If MDS mitigation is enabled by the tunable but MDS microcode is not
early-loaded, software mitigation is selected. This causes
initializecpu() to try to allocate memory which makes boot process
very unhappy.
Create SYSINIT that runs sufficiently late to succeed.
Reported by: naddy
PR: 237968
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
are able to determine some virtual machines, but the vm_guest variable was
still only being set to VM_GUEST_VM.
Since we do know what some of them specifically are, we can set vm_guest
appropriately.
Also, if we see the CPUID has the HV flag, but we were unable to find a
definitive vendor in the Hypervisor CPUID Information Leaf, fall back to
the older detection methods, as they may be able to determine a specific
HV type.
Add VM_GUEST_PARALLELS value to VM_GUEST for Parallels.
Approved by: cem
Differential Revision: https://reviews.freebsd.org/D20305
This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.
EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).
As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.
LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).
No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.
type, use a table to make it easier to add more in the future, if needed.
Add VirtualBox detection to the table ("VBoxVBoxVBox" is the hypervisor
vendor string to look for.) Also add VM_GUEST_VBOX to the VM_GUEST
enumeration to indicate VirtualBox.
Save the CPUID base for the hypervisor entry that we detected. Driver code
may need to know about it in order to obtain additional CPUID features.
Approved by: bryanv, jhb
Differential Revision: https://reviews.freebsd.org/D16305
With lockless DI, pmap_remove() requires operational thread lock,
which is initialized at SI_SUB_RUN_QUEUE for thread0. Move it even
later where APs are started, the moment after which other boot memory
like trampoline stacks is already being freed.
Reported by: gtetlow
Sponsored by: The FreeBSD Foundation
MFC after: 30 days
In all practical situations, the resolver visibility is static.
Requested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: so (emaste)
Differential revision: https://reviews.freebsd.org/D20281
A static analyzer complained about a couple instances of checking a
variable against NULL after already having dereferenced it.
- dmar_gas_alloc_region: remove the tautological NULL checks
- dmar_release_resources / dmar_fini_fault_log: don't deref unit->regs
unless initialized.
And while here, fix an inverted initialization check in dmar_fini_qi.
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential revision: https://reviews.freebsd.org/D20263
Microarchitectural buffers on some Intel processors utilizing
speculative execution may allow a local process to obtain a memory
disclosure. An attacker may be able to read secret data from the
kernel or from a process when executing untrusted code (for example,
in a web browser).
Reference: https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00233.html
Security: CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091
Security: FreeBSD-SA-19:07.mds
Reviewed by: jhb
Tested by: emaste, lwhsu
Approved by: so (gtetlow)
This gets rid of the global cpu_ipi_pending array.
While replace cmpset with fcmpset in the delivery code and opportunistically
check if given IPI is already pending.
Sponsored by: The FreeBSD Foundation
IPI_STOP is used after panic or when ddb is entered manually. MONITOR/
MWAIT allows CPUs that support the feature to sleep in a low power way
instead of spinning. Something similar is already used at idle.
It is perhaps especially useful in oversubscribed VM environments, and is
safe to use even if the panic/ddb thread is not the BSP. (Except in the
presence of MWAIT errata, which are detected automatically on platforms with
known wakeup problems.)
It can be tuned/sysctled with "machdep.stop_mwait," which defaults to 0
(off). This commit also introduces the tunable
"machdep.mwait_cpustop_broken," which defaults to 0, unless the CPU has
known errata, but may be set to "1" in loader.conf to signal that mwait
wakeup is broken on CPUs FreeBSD does not yet know about.
Unfortunately, Bhyve doesn't yet support MONITOR extensions, so this doesn't
help bhyve hypervisors running FreeBSD guests.
Submitted by: Anton Rang <rang AT acm.org> (earlier version)
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20135
Rather than just accessing it via pointer cast.
No functional change intended.
Discussed with: kib (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20135
We may need the BSP to reboot, but we don't need any AP CPU that isn't the
panic thread. Any CPU landing in this routine during panic isn't the panic
thread, so we can just detect !BSP && panic and shut down the logical core.
The savings can be demonstrated in a bhyve guest with multiple cores; before
this change, N guest threads would spin at 100% CPU. After this change,
only one or two threads spin (depending on if the panicing CPU was the BSP
or not).
Konstantin points out that this may break any future patches which allow
switching ddb(4) CPUs after panic and examining CPU-local state that cannot
be inspected remotely. In the event that such a mechanism is incorporated,
this behavior could be made configurable by tunable/sysctl.
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20019
On some machines, DMAR contexts must be created before all devices
under the scope of the corresponding DMAR unit are enumerated.
Current code has two problems with that:
- scope lookup returns NULL device_t, which causes to skip creating a
context with RMRR, which is fatal for the affected device.
- calculation of the final pci dbsf address fails if any bridge in the
scope is not yet enumerated, because code relies on pcib_get_bus().
Make creation of contexts work either with device_t, or with DMAR PCI
scope paths. Scope provides enough information to infer context
address, and it is directly matched against DMAR tables scopes.
When calculating bus addresses for the scope or device, use direct
pci_cfgregread(PCIR_SECBUS_1) to get the secondary bus number, instead
of pcib_get_bus().
The issue was observed on HP Gen servers, where iLO PCI devices are
located behind south bridge switch. Turning on translation without
satisfying RMRR requests caused iLO to mostly hang, up to the level of
being unusable to control the server.
While there, remove hw.dmar.dmar_match_verbose tunable, and make the
normal logging under bootverbose useful and sufficient to diagnose
DRHD and RMRR parsing and matching.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Some early PCIe chipsets are explicitly listed in the white-list to
enable use of the MMIO config space accesses, perhaps because ACPI
tables were not reliable source of the base MCFG address at that time.
For that chipsets, MCFG base was read from the known chipset MCFGbase
config register.
During very early stage of boot, when access to the PCI config space
is performed (see e.g. pci_early_quirks.c), we cannot map 255MB of
registers because the method used with pre-boot pmap overflows initial
kernel page tables.
Move fallback to read MCFGbase to the attachment method of the
x86/legacy device, which removes code duplication, and results in the
use of io accesses until MCFG is parsed or legacy attach called.
For amd64, pre-initialize cfgmech with CFGMECH_1, right now we
dynamically assign CFGMECH_1 to it anyway, and remove checks for
CFGMECH_NONE.
There is a mention in the Intel documentation for corresponding
chipsets that OS must use either io port or MMIO access method, but we
already break this rule by reading MCFGbase register, so one more
access seems to be innocent.
Reported by: longwitz@incore.de
PR: 236838
Reviewed by: avg (other version), jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19833
