Commit Graph

247 Commits

Author SHA1 Message Date
Oleksandr Tymoshenko
38ae0c59b9 [evdev] Add evdev support to atkbd(4) driver
To enable event sourcing from atkbd kern.evdev.rcpt_mask value
should have bit 3 set.

Submitted by:	Vladimir Kondratiev <wulf@cicgroup.ru>
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D8381
2016-11-03 00:56:59 +00:00
Oleksandr Tymoshenko
dcc414b888 [psm] Fix choosing wrong mode for synaptic device + trackpoint
With guest trackpoint present trackpoint probing switched synaptics
device to absolute mode with different protocol instead of keeping it
in relative mode.

PR:		213757
Submitted by:	Vladimir Kondratyev <wulf@cicgroup.ru>
MFC after:	1 week
2016-11-02 01:27:20 +00:00
Warner Losh
013da020e2 Assume all coreboot BIOSes have the need for these workarounds because
coreboot implements the keyboard controller and it's common to all
Chromebooks. The workaround won't hurt and may help.
2016-10-17 04:07:12 +00:00
Oleksandr Tymoshenko
0901b57792 Fix extended buttons support on synaptic clickpad
Fix regression introduced by r306355 on synaptic clickpads with
extended buttons (buttons stopped working)

PR:		205690
Submitted by:	Vladimir Kondratyev <wulf@cicgroup.ru>
2016-10-06 01:01:00 +00:00
Gleb Smirnoff
37d0ac15e6 Fix indentation.
CID:	1363671
2016-10-04 16:44:40 +00:00
Oleksandr Tymoshenko
da464e7181 Replace explicit TUNABLE_INT to sysctl with CTLFLAG_TUN
- Replace tunables-only hw.psm.synaptics_support, hw.psm.trackpoint_support,
    and hw.psm.elantech_support with respective sysctls declared with
    CTLFLAG_TUN. It simplifies checking them in userland, also makes them
    easier to get discovered by user
- Get rid of debug.psm.loglevel and hw.psm.tap_enabled TUNABLE_INT
    declaration by adding CTLFLAG_TUN to read/write sysctls that were
    already declared for these tunables.

Suggested by: jhb
2016-09-30 03:03:42 +00:00
Oleksandr Tymoshenko
0fe98e8f2c Add Elantech trackpad support
Elantech trackpads are found in some laptops like the Asus UX31E. They
are "synaptics compatible" but use a slightly different protocol.

Elantech hardware support is not enabled by default and just like
Synaptic or TrackPoint devices it should be enabled by setting
tunable, in this case hw.psm.elantech_support, to non-zero value

PR:		205690
Submitted by:	Vladimir Kondratyev <wulf@cicgroup.ru>
MFC after:	1 week
2016-09-26 22:06:19 +00:00
Oleksandr Tymoshenko
14131c0ba4 Use OF_prop_free instead of direct call to free(9)
Reviewed by:	marius
2016-05-18 23:39:31 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Pedro F. Giffuni
73a1170a8c sys/dev: use our nitems() macro when it is avaliable through param.h.
No functional change, only trivial cases are done in this sweep,
Drivers that can get further enhancements will be done independently.

Discussed in:	freebsd-current
2016-04-19 23:37:24 +00:00
Justin Hibbits
da1b038af9 Use uintmax_t (typedef'd to rman_res_t type) for rman ranges.
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit.  This extends rman's resources to uintmax_t.  With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).

Why uintmax_t and not something machine dependent, or uint64_t?  Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures.  64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead.  That being said, uintmax_t was chosen for source
clarity.  If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros.  Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros.  Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.

Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)

Tested PAE and devinfo on virtualbox (live CD)

Special thanks to bz for his testing on ARM.

Reviewed By: bz, jhb (previous)
Relnotes:	Yes
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
2016-03-18 01:28:41 +00:00
Justin Hibbits
2dd1bdf183 Convert rman to use rman_res_t instead of u_long
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources.  For
now, this is still compatible with u_long.

This is step one in migrating rman to use uintmax_t for resources instead of
u_long.

Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.

This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.

Reviewed By: jhb
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
2016-01-27 02:23:54 +00:00
Andrew Turner
b6d2c99a09 When exiting two-finger scroll the Synaptics device may report a jump in
absolute position. This seems to be correlated with only removing a single
finger. To work around this report no movement on from the first packet
when the user exits scrolling.
2015-12-14 11:13:50 +00:00
Rui Paulo
3bf6d93962 Synaptics: fix a problem with trackpoint passthrough.
There was a inconsistency which led to enable passthrough commands
being interpreted as actual touchpad commands.

Submitted by:	Jan Kokemüller <jan.kokemueller at gmail.com>
MFC after:	1 week
2015-06-19 00:10:30 +00:00
Gleb Smirnoff
a57b51f99a Fix miss from r284320.
Coverity:	1018895
2015-06-16 15:39:34 +00:00
Gleb Smirnoff
b63720c613 Unbreak mouse on resume on Thinkpads when hw.psm.trackpoint_support=0,
which is default.  It was broken in r281441.

It appears that set_trackpoint_parameters() call on resume disables the
mouse.  So, we need not call it on resume if hw.psm.trackpoint_support=0.

The problem is that the probe functions are used both for probing and
for reiniting on resume. And the absense of the softc parameter is used
as a mark to distinguish reinit and probe, which is quite ugly. At the
same time the softc parameter is needed to call set_trackpoint_parameters().

o Change the arguments of probefunc_t to always supply the softc, and
  use additional enum argument to tell probing from initing.
o Don't call set_trackpoint_parameters() from global doinitialize(),
  instead call it from the enable_trackpoint() only.
o In enable_synaptics() call enable_trackpoint() in both probe and
  reinit cases.

Together with:  Jan Kokemüller <jan.kokemueller gmail.com>
2015-06-12 13:57:04 +00:00
Rui Paulo
017d485987 synaptics: more support for semi-MT trackpads.
Several improvements to the Synaptics driver to support
semi-multitouch trackpads and some other fixes:

- Two finger scrolling support for "semi-MT" touchpads. Those include
many of the older Synaptics touchpads before "true" multitouch support
(indicated by capMultiFinger). Semi-MT touchpads can report a second
finger position, but the X or Y coordinate may be swapped with some
coordinate of the first finger. This is a result of how the hardware
works internally. Therefore, all that can be reliably extracted is the
bounding box of the two finger positions. Semi-MT touchpads can be
recognized by the capAdvancedGestures capability bit. After setting the
mode byte, advanced gestures mode has to be enabled. Then, data packets
compatible with the capMultiFinger format are sent, so the same two
finger scrolling code can be leveraged. Enabling advanced gestures mode
on true multitouch touchpads should be harmless. Linux seems to always
enable advanced gestures mode.

- Put mode setting logic into own functions synaptics_preferred_mode()
and synaptics_set_mode() to have this in one place.
synaptics_passthrough_on() and synaptics_passthrough_off() currently
always use 0xc1 as the mode byte, which may be wrong for touchpads that
don't have capExtended.

- Expose X and Y resolution of touchpad to userland. Also expose minimum
and maximum X and Y coordinates. This is useful for programs in
userspace that read raw PSM packets (with PSM_LEVEL_NATIVE enabled) and
need to interpret the coordinates.

- Also send "extended w mode" packets (see section 3.2.9 of
511-000275-01_RevB.pdf) to userspace if PSM_LEVEL_NATIVE is enabled.
This is useful for userspace programs/drivers such as
xf86-input-synaptics that can handle these packets.

- Fix parsing of nExtendedQueries, and request extended/continued
capability bits depending on this value.

- capReportsMax, capClearPad, capAdvancedGestures and capCoveredPad must
be extracted from status[0] and not status[2], I think.

Submitted by:	Jan Kokemüller jan.kokemueller at gmail.com
2015-05-10 20:36:57 +00:00
Jung-uk Kim
59023e6ce2 Remove leftover from r282269.
MFC after:	2 weeks
X-MFC with:	r282269
2015-04-30 17:49:35 +00:00
Roger Pau Monné
b19f7eece6 atkbd: remove usage of x86bios
Instead of trying to get the keyboard repeat rate set by the BIOS just set a
default one. This allows removing the usage of x86bios from atkbd.

Sponsored by: Citrix Systems R&D
Reviewed by: jkim, delphij
Differential Revision: https://reviews.freebsd.org/D2399
MFC after: 2 weeks
2015-04-30 07:00:25 +00:00
Rui Paulo
1321d68db0 Synaptics: don't report the middle button when clickPad is used.
On trackpads that had support for both, we were sending two button
events when the trackpad was pressed.

Tested by:	Jakob Alvermark <jakob at alvermark.net>
MFC after:	1 week
2015-04-18 20:55:55 +00:00
Rui Paulo
e6ef49ea68 Add support for controlling the trackpoint when Synaptics is enabled.
To accomplish this, we must put the Synaptics hardware in passthrough
mode when talking to the trackpoint.

I only performed minor style modifications.

Submitted by:	Jan Kokemüller <jan.kokemueller at gmail.com>
MFC after:	1 week
2015-04-11 18:45:22 +00:00
Rui Paulo
e197118083 Improve Synaptics support for newer touchpads.
Enable two finger scrolling by default and disable the edge scrolling if
the touchpad has no physical zone for it.  Disable directional scrolling
by default to avoid using extended buttons as scroll buttons.

Add support for ClickPad.  On Lenovo laptops, this is the button
reported when one presses the touchpad.

While there, fix a problem where the extended buttons were not reporting
the button release event correctly: we need to save the state of the
buttons and report it to sysmouse until we receive a packet from the
touchpad indicating the button has been released.  This makes it
possible to use an extended button to resize a window.  On Lenovo
laptops, the major buttons are actually reported as extended buttons.

Tested by:	many (current@)
MFC after:	1 week
2015-04-11 18:44:07 +00:00
Rui Paulo
c282164d42 psm: print newer Synaptics Touchpad capabilities. 2015-04-06 01:04:08 +00:00
Michael Gmelin
6c176113bb Quirk based support of Chromebook keyboard found in Acer C720
This probably supports other devices based on SeaBIOS, which need
to be added to the smbios based quirks table.

The functionality has been ported from DragonFlyBSD and adapted
to FreeBSD's more general purpose environment.

Devices not covered by a quirk shouldn't be affected at all. Thanks
to jhb and kostikbel for reviewing the code.

Reviewed by:	kostikbel, jhb
Approved by:	jhb, kostikbel
Differential Revision: https://reviews.freebsd.org/D1802
2015-02-14 22:12:17 +00:00
John Baldwin
fadf3fb98c Convert from timeout(9) to callout(9). 2014-09-22 14:27:26 +00:00
Marcel Moolenaar
e7d939bda2 Remove ia64.
This includes:
o   All directories named *ia64*
o   All files named *ia64*
o   All ia64-specific code guarded by __ia64__
o   All ia64-specific makefile logic
o   Mention of ia64 in comments and documentation

This excludes:
o   Everything under contrib/
o   Everything under crypto/
o   sys/xen/interface
o   sys/sys/elf_common.h

Discussed at: BSDcan
2014-07-07 00:27:09 +00:00
Eitan Adler
4c8d7275a4 Revert r255152:
It turns out that synaptics_support was turned off by default
because its probing method is too intrusive not because it was unstable.

Once this is fixed it should be enabled once again.

Reported by:	delphij, jkim
2013-09-04 18:42:05 +00:00
Jean-Sébastien Pédron
79d98ecd19 psm: Add support for middle and extended buttons on Synaptics touchpads
PR:		kern/170834
Submitted by:	Brandon Gooch <jamesbrandongooch@gmail.com>
Tested by:	Artyom Mirgorodskiy <artyom.mirgorodsky@gmail.com>
MFC after:	1 month
2013-09-02 19:15:20 +00:00
Eitan Adler
abcdcce124 synaptics and trackpoint support are stable enough to be on by default.
Eventually both options should be removed.

Reviewed by:	dumbbell
2013-09-02 18:25:18 +00:00
Jung-uk Kim
634cf355b0 Remove a bogus re-assignment.
MFC after:	3 days
2013-05-13 20:03:59 +00:00
Jung-uk Kim
78260bb30a List TrackPoint device before generic model. 2013-03-18 23:31:22 +00:00
Jung-uk Kim
569d8f7e27 Add preliminary support for IBM/Lenovo TrackPoint.
PR:		kern/147237 (based on the initial patch for 8.x)
Tested by:	glebius (device detection and suspend/resume)
MFC after:	1 month
2013-03-18 23:22:47 +00:00
Warner Losh
0897438a74 Pass the device_t into atkbd_{probe,attach}_unit and get the
controller unit and keyboard unit from there. It will be needed
for other things in the future as well...
2013-01-11 21:42:23 +00:00
Warner Losh
f0143dac9a style(9) changes before I do more real changes. 2013-01-11 21:19:45 +00:00
Jean-Sébastien Pédron
778dcb1c13 psm: Support detection of Synaptics touchpad v7.5 and above
Starting with firmware v7.5, the "Read TouchPad Modes" ($01) and "Read
Capabilities" ($02) commands changed: previously constant bytes now
carry variable information.

We now compare those bytes to expected constants only for firmware prior
to v7.5.

Tested by:	Zeus Panchenko <zeus@gnu.org.ua>
MFC after:	1 week
2012-12-18 20:02:53 +00:00
Kevin Lo
26f370d011 Fix typo: s/protocl/protocol 2012-09-20 10:07:31 +00:00
John Baldwin
ecbb462c38 Use callout(9) instead of timeout(9) to manage timers. 2012-09-07 19:42:36 +00:00
John Baldwin
fec4b62adf Add another PS/2 keyboard PNP ID. This ID is listed as
"Reserved by Microsoft" in the standard PNP ID table, but has been seen
in the wild on at least one laptop.

PR:		kern/169571
Submitted by:	Matthias Apitz  guru unixarea de
MFC after:	3 days
2012-07-06 12:13:28 +00:00
Jung-uk Kim
a6e69b92e6 Add a PNP ID for Japanese 106-key keyboard.
PR:		kern/166459
MFC after:	3 days
2012-03-28 17:58:37 +00:00
Jung-uk Kim
f9be5550f7 - Do not clobber softc when psm(4) is reintialized.
- Make INITAFTERSUSPEND flag independent of HOOKRESUME flag.
- Automatically set INITAFTERSUSPEND flag when ALPS GlidePoint is detected.
- Always probe Synaptics Touchpad.  Allow MOUSE_SYN_GETHWINFO ioctl and
automatically set INITAFTERSUSPEND flag when a supported device is detected,
regardless of "hw.psm.synaptics_support" tunable setting.
- Update psm(4) to reflect the above changes.
- Remove long-time defunct SYNCHACK flag while I am in the neighborhood.

MFC after:	1 month
2012-03-27 23:43:01 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Ed Schouten
78d4d8eeb2 Restore binary compatibility for GIO_KEYMAP and PIO_KEYMAP.
Back in 2009 I changed the ABI of the GIO_KEYMAP and PIO_KEYMAP ioctls
to support wide characters. I created a patch to add ABI compatibility
for the old calls, but I didn't get any feedback to that.

It seems now people are upgrading from 8 to 9 they experience this
issue, so add it anyway.
2011-07-17 08:19:19 +00:00
Xin LI
d82aac763c Correct a typo.
Submitted by:	Fabian Keil <fk fabiankeil de>
MFC after:	3 days
2011-06-20 16:42:20 +00:00
Xin LI
97ae66672f Add comments about the validation. 2011-06-11 01:19:19 +00:00
Jung-uk Kim
393ec7ad27 Validate INT 15h and 16h vectors more strictly. Traditionally these entry
points are fixed addresses and (U)EFI CSM specification also mandated that.
Unfortunately, (U)EFI CSM specification does not specifically mention this
is to call service routine via interrupt vector table or to jump directly
to the entry point.  As a result, some CSM seems to install two routines
and acts differently, depending on how it was executed, unfortunately.
When INT 15h is used, it calls a function pointer (which is probably a UEFI
service function).  When it jumps directly to the entry point, it executes
a simple and traditional INT 15h service routine.  Therefore, actually there
are two possible fixes, i. e., this fix or jumping directly to the fixed
entry point.  However, we chose this fix because a) keyboard typematic
support via BIOS is becoming extremely rarer and b) we cannot support random
service routine installed by a firmware or a boot loader.  This should fix
Lenovo X220 laptop, specifically.

Reviewed by:	delphij
MFC after:	3 days
2011-06-06 23:03:37 +00:00
Jung-uk Kim
7d09e4ab23 Revert r222152. The root cause was analysed and better fix is upcoming.
Discussed with:	delphij
2011-06-06 22:18:40 +00:00
Xin LI
dd4aae65f1 Add a new knob to atkbd(4) to enable typematic rate detection on boot,
which is now disabled by default.  The detection is known to cause hangs
on boot with some new Lenovo laptops on FreeBSD/amd64.

Reported by:	gnn
Discussed with:	jkim
MFC after:	3 months
2011-05-20 22:36:17 +00:00
John Baldwin
a11df0cbe6 Only use the BIOS-supplied IRQ for the atkbdc device for a child atkbd
device.  Specifically, do not reuse it for a child psm device.

Tested by:	many
2010-12-21 12:49:37 +00:00
Tijl Coosemans
81bd5041a2 Merge amd64 and i386 bus.h and move the resulting header to x86. Replace
the original amd64 and i386 headers with stubs.

Rename (AMD64|I386)_BUS_SPACE_* to X86_BUS_SPACE_* everywhere.

Reviewed by:	imp (previous version), jhb
Approved by:	kib (mentor)
2010-12-20 16:39:43 +00:00
John Baldwin
ce7a3e4774 - If the atkbdc device is assigned an IRQ resource by ACPI or the PnPBIOS,
allow the child atkbd device to reuse that IRQ resource instead of
  reallocating the same IRQ from the parent bus inside the atkbd driver.
- Don't allocate a shared IRQ for the atkbd driver.  For AT keyboard
  devices on an ISA bus the IRQ is not shareable.  Instead, the bus driver
  should mark the IRQ shareable if the bus supports shared IRQs.
- Don't identify child devices until after the atkbdc device itself has
  attached.
2010-12-16 17:14:37 +00:00