Originally IFCAP_NOMAP meant that the mbuf has external storage pointer
that points to unmapped address. Then, this was extended to array of
such pointers. Then, such mbufs were augmented with header/trailer.
Basically, extended mbufs are extended, and set of features is subject
to change. The new name should be generic enough to avoid further
renaming.
The handshake timer can race with another thread sending a FIN or RST
to close a TOE TLS socket. Just bail from the timer without
rescheduling if the connection is closed when the timer fires.
Reported by: Sony Arpita Das @ Chelsio QA
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D27583
The issue was found while building cxgbe with gcc 10 (in illumos),
the array subscription check is warning us about outside the bounds
access.
See also: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
By default, if a TOE TLS socket stops receiving data for more than 5
seconds, revert the connection back to plain TOE mode. This provides
a fallback if the userland SSL library does not support KTLS. In
addition, for client TLS 1.3 sockets using connect(), the TOE socket
blocks before the handshake has completed since the socket option is
only invoked for the final handshake.
The timeout defaults to 5 seconds, but can be changed at boot via the
hw.cxgbe.toe.tls_rx_timeout tunable or for an individual interface via
the dev.<nexus>.toe.tls_rx_timeout sysctl.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27470
This includes mbufs waiting for data from sendfile() I/O requests, or
mbufs awaiting encryption for KTLS.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27469
If TOE TLS is requested for an unsupported cipher suite or TLS
version, disable TLS processing and fall back to plain TOE. In
addition, if an error occurs when saving the decryption keys in the
card's memory, disable TLS processing and fall back to plain TOE.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27468
If a TOE TLS socket ends up using an unsupported TLS version or
ciphersuite, it must be downgraded to a "plain" TOE socket with TLS
encryption/decryption performed on the host. The previous
implementation of this fallback was incomplete and resulted in hung
connections.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27467
It is common for freelists to be starving when a netmap application
stops. Mailbox commands to free queues can hang in such a situation.
Avoid that by not freeing the queues when netmap is switched off.
Instead, use an alternate method to stop the queues without releasing
the context ids. If netmap is enabled again later then the same queue
is reinitialized for use. Move alloc_nm_rxq and txq to t4_netmap.c
while here.
MFC after: 1 week
Sponsored by: Chelsio Communications
r367917 fixed the backpressure on the netmap rxq being stopped but that
doesn't help if some other netmap rxq is starved (because it is stopping
too although the driver doesn't know this yet) and blocks the pipeline.
An alternate fix that works in all cases will be checked in instead.
Sponsored by: Chelsio Communications
The netmap application using the driver is responsible for replenishing
the receive freelists and they may be totally depleted when the
application exits. Packets in flight, if any, might block the pipeline
in case there aren't enough buffers left in the freelist. Avoid this by
filling up the freelists with a driver allocated buffer.
MFC after: 1 week
Sponsored by: Chelsio Communications
TCP SYNs in inner traffic will hit hardware listeners when VXLAN/NVGRE
rx parsing is enabled in the chip. t4_tom should pass on these SYNs to
the kernel and let it deal with them as if they arrived on the non-TOE
path.
Reported by: Sony at Chelsio
MFC after: 1 week
Sponsored by: Chelsio Communications
Otherwise, a socket can have a non-NULL tp->tod while TF_TOE is clear.
In particular, if a newly accepted socket falls back to non-TOE due to
an active open failure, the non-TOE socket will still have tp->tod set
even though TF_TOE is clear.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27028
The MAC address can be set with the optional mac-addr property in the VF
section of the iovctl.conf(5) used to instantiate the VFs.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Query the firmware for the MAC address set by the PF for the VF and use
it instead of the firmware generated MAC if it's available.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
This fixes a potential crash in firmware 1.25.0.0 on the passive open
side during TOE operation.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
This is mostly mechanical except for vmspace_exit(). There, use the new
refcount_release_if_last() to avoid switching to vmspace0 unless other
processes are sharing the vmspace. In that case, upon switching to
vmspace0 we can unconditionally release the reference.
Remove the volatile qualifier from vm_refcnt now that accesses are
protected using refcount(9) KPIs.
Reviewed by: alc, kib, mmel
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27057
- Get the number of classes from chip_params.
- Get the number of ethofld tids from the firmware.
- Do not let tcp_ratelimit allocate all traffic classes.
Sponsored by: Chelsio Communications
In certain edge cases, the NIC might have only received a partial TLS
record which it needs to return to the driver. For example, if the
local socket was closed while data was still in flight, a partial TLS
record might be pending when the connection is closed. Receiving a
RST in the middle of a TLS record is another example. When this
happens, the firmware returns the the partial TLS record as plain TCP
data via CPL_RX_DATA. Handle these requests by returning an error to
OpenSSL (via so_error for KTLS or via an error TLS record header for
the older Chelsio OpenSSL interface).
Reported by: Sony Arpita Das @ Chelsio
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: Revision: https://reviews.freebsd.org/D26800
The firmware can allocate ingress and egress context ids anywhere from
its configured range. Size the iq/eq maps to match the entire range
instead of assuming that the firmware always allocates the first
available context id.
Reported by: Baptiste Wicht @ Verisign
MFC after: 1 week
Sponsored by: Chelsio Communications
Flow control was disabled during initial TOE TLS development to
workaround a hang (and to match the Linux TOE TLS support for T6).
The rest of the TOE TLS code maintained credits as if flow control was
enabled which was inherited from before the workaround was added with
the exception that the receive window was allowed to go negative.
This negative receive window handling (rcv_over) was because I hadn't
realized the full implications of disabling flow control.
To clean this up, re-enable flow control on TOE TLS sockets. The
existing TPF_FORCE_CREDITS workaround is sufficient for the original
hang. Now that flow control is enabled, remove the rcv_over
workaround and instead assert that the receive window never goes
negative matching plain TCP TOE sockets.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26799
r365732 was the first attempt to get an accurate count but it was
writing to some read-only registers to clear them and that obviously
didn't work. Instead, note the counter's value when it is supposed to
be cleared and subtract it from future readings.
dev.<port>.stats.rx_fcs_error should not be serviced from the MPS
register for T6.
The stats.* sysctls should all use T5_PORT_REG for T5 and above. This
must have been missed in the initial T5 support years ago. Fix it while
here.
MFC after: 3 days
Sponsored by: Chelsio Communications
These kind of drops come for free in the sense that they do not use the
filter TCAM or any other resource that wouldn't normally be used during
rx. Frames dropped by the hardware get counted in the MAC's rx stats
but are not delivered to the driver.
hw.cxgbe.attack_filter
Set to 1 to enable the "attack filter". Default is 0. The attack
filter will drop an incoming frame if any of these conditions is true:
src ip/ip6 == dst ip/ip6; tcp and src/dst ip is not unicast; src/dst ip
is loopback (127.x.y.z); src ip6 is not unicast; src/dst ip6 is loopback
(::1/128) or unspecified (::/128); tcp and src/dst ip6 is mcast
(ff00::/8).
hw.cxgbe.drop_ip_fragments
Set to 1 to drop all incoming IP fragments. Default is 0. Note that
this drops valid frames.
hw.cxgbe.drop_pkts_with_l2_errors
Set to 1 to drop incoming frames with Layer 2 length or checksum errors.
Default is 1.
hw.cxgbe.drop_pkts_with_l3_errors
Set to 1 to drop incoming frames with IP version, length, or checksum
errors. Default is 0.
hw.cxgbe.drop_pkts_with_l4_errors
Set to 1 to drop incoming frames with Layer 4 length, checksum, or other
errors. Default is 0.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Both cxgbe(4) and mlx5(4) wrapped the existing send tag header with
their own identical headers that stored the type that the
type-specific tag structures inherited from, so in practice it seems
drivers need this in the tag anyway. This permits removing these
extra header indirections (struct cxgbe_snd_tag and struct
mlx5e_snd_tag).
In addition, this permits driver-independent code to query the type of
a tag, e.g. to know what type of tag is being queried via
if_snd_query.
Reviewed by: gallatin, hselasky, np, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26689
These tunables can only be set to a valid cluster size (2K, 4K, 9K, or
16K) as documented in the man page. Anything else could lead to a
panic on interface up.
Reported by: mav@
MFC after: 1 week
Sponsored by: Chelsio Communications
ccr(4) uses software to handle GCM and CCM requests not supported by
the crypto engine (e.g. with only AAD and no payload). This change
adds a fallback for a few more requests such as those with more SGL
entries than can fit in a work request (this can happen for GCM when
decrypting a TLS record split across 15 or more packets).
Reported by: Chelsio QA
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26582
Bind the netmap tx queues to a special '0xff' scheduling class which
makes the firmware skip some processing related to rate limiting on the
outgoing traffic. Future firmwares will do this automatically.
MFC after: 1 week
Sponsored by: Chelsio Communications
- Only active netmap receive queues should be in the RSS lookup table.
- The RSS table should be restored for NIC operation when the last
active netmap queue is switched off, not the first one.
- Support repeated netmap ON/OFF on a subset of the queues. This works
whether the the queues being enabled and disabled are the only ones
active or not. Some kring indexes have to be reset in the driver for
the second case.
MFC after: 1 week
Sponsored by: Chelsio Communications
This allows the PF interfaces to communicate with the VF interfaces over
the internal switch in the ASIC. Fix the GL limits for VM work requests
while here.
MFC after: 3 days
Sponsored by: Chelsio Communications
Hardware assistance includes checksumming (tx and rx), TSO, and RSS on
the inner traffic in a VXLAN tunnel.
Relnotes: Yes
Sponsored by: Chelsio Communications
