- Drain offload transmit queues when RATELIMIT is enabled but
TCP_OFFLOAD is not.
- Expose the per-VI nofldtxq and first_ofld_txq sysctls when
RATELIMIT is enabled but TCP_OFFLOAD is not.
- Clear offload transmit queue stats as part of a 'cxgbetool clearstats'
request when RATELIMIT is enabled but TCP_OFFLOAD is not.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D18966
mean that the driver should taste the firmware in the KLD and use that
firmware's version for all its fw_install checks.
The driver gets firmware version information from compiled-in values by
default and this change allows custom (or older/newer) firmware modules
to be used with the stock driver.
There is no change in default behavior.
MFC after: 1 week
Sponsored by: Chelsio Communications
indicates an error. Also, do not remove it twice from the hf list in
this case.
Submitted by: Krishnamraju Eraparaju @ Chelsio
MFC after: 1 week
Sponsored by: Chelsio Communicatons
ccr reuses the control queue and first rx queue from the first port on
each adapter. The driver cannot send requests until those queues are
initialized. Refuse to create sessions for now if the queues aren't
ready. This is a workaround until cxgbe allocates one or more
dedicated queues for ccr.
PR: 233851
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D18478
- Fix PR 227760 by getting the TOE to respond to the SYN after the call
to toe_syncache_add, not during it. The kernel syncache code calls
syncache_respond just before syncache_insert. If the ACK to the
syncache_respond is processed in another thread it may run before the
syncache_insert and won't find the entry. Note that this affects only
t4_tom because it's the only driver trying to insert and expand
syncache entries from different threads.
- Do not leak resources if an embryonic connection terminates at
SYN_RCVD because of L2 lookup failures.
- Retire lctx->synq and associated code because there is never a need to
walk the list of embryonic connections associated with a listener.
The per-tid state is still called a synq entry in the driver even
though the synq itself is now gone.
PR: 227760
MFC after: 2 weeks
Sponsored by: Chelsio Communications
through.
cxgb4vf doesn't own the buffer size list but still expects the first two
entries to be 4K and some power of 2 respectively. The BSD cxgbe
doesn't care where its preferred buffer sizes are as long as they're in
the list somewhere, so just move its entries towards the end as a
workaround.
MFC after: 1 month
Sponsored by: Chelsio Communicatons
card initialization. This is an expanded version of r333682.
Break up prep_firmware into simpler routines while here. Load the
firmware/config KLD only if needed.
MFC after: 1 month
Sponsored by: Chelsio Communications
This fixes builds of kernels without INET6 such as LINT-NOINET6.
Reported by: arybchik
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D18384
- Store the clip table in 'struct adapter' instead of in the TOM softc.
- Init the clip table during attach and teardown during detach.
- While here, add a dev.<nexus>.<unit>.misc.clip sysctl to dump the
CLIP table.
This does mean that we update the clip table even if TOE is not enabled,
but non-TOE things need the CLIP table anyway.
Reviewed by: np, Krishnamraju Eraparaju @ Chelsio
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D18010
After the fix contained in r341144, cxgbe does not need anymore
to set the IFCAP_NETMAP flag manually.
Reviewed by: np
Approved by: gnn (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17987
vmem's are not just used for TLS memory in TOM and the #include actually
predates the TLS code so should not have been removed when the TLS vmem
moved in r340466.
Pointy hat to: jhb
Sponsored by: Chelsio Communications
The key context is always placed immediately after the work request
header. The total work request length has to be rounded up by 16
however.
MFC after: 1 month
Sponsored by: Chelsio Communications
The addresses passed when reading and writing keys are always shifted
right by 5 as the memory locations are addressed in 32-byte chunks, so
the quantum needs to be 32, not 8.
MFC after: 1 month
Sponsored by: Chelsio Communications
For TOE TLS, we just want to advance the send pointer to skip over the
record just sent to the TOE. The recently added sbsndptr_adv() is
sufficient for that and is cheaper.
MFC after: 1 month
Sponsored by: Chelsio Communications
A kernel panic can occur if the cxgbe interface is DOWN
when activating netmap. This patch prevents the driver
from freeing up cxgbe netmap resources when they have not
been allocated.
Submitted by: Nicolas Witkowski <nwitkowski@verisign.com>
Reviewed by: np
MFC after: 1 week
Sponsored by: Verisign, Inc.
Differential Revision: https://reviews.freebsd.org/D17802
r254889 added tcp_state_change() as a centralized place to log state
changes in TCP connections for DTrace. r294869 and r296881 took
advantage of this central location to manage per-state counters.
However, TOE sockets were still performing some (but not all) state
change updates via direct assignments to t_state. This resulted in
state counters underflowing when TOE was in use. Fix by using
tcp_state_change() when changing a TOE connection's state.
Reviewed by: np, markj
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D17915
Previously attempts to read the MC region were failing since the
length was greater than 2^31.
Reviewed by: np
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D17857
- Use PH_loc.eight[1] as a general 'cflags' (Chelsio flags) field to
describe properties of a queued packet. The MC_RAW_WR flag
indicates an mbuf holding a raw work request. mbuf_cflags() returns
the current flags.
- Raw work request mbufs are allocated via alloc_wr_mbuf() which will
allocate a single contiguous range to hold the mbuf data. The
consumer can use mtod() to obtain the start of the work request and
write the required work request in the buffer. The mbuf can then be
enqueued directly to the txq via mp_ring_enqueue().
- Since raw work requests might potentially send arbitrary work
requests, only set the EQUIQ and EQUEQ bits on work requests that
support them such as the normal tunneled Ethernet packet work
requests.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D17811
Currently this is a no-op, but will matter in the future when
cannot_use_txpkts() starts checking other conditions than just
needs_tso().
Sponsored by: Chelsio Communications
- Add a bus_child_location_str method to the nexus drivers that prints
out 'port=N' as the location string exported via devinfo and the
'%location' sysctl node.
- We can't use a bus_hint_device_unit to wire the unit numbers of
devices with a fixed devclass as the device gets assigned a unit in
make_device() before the device creator can set softc, etc.
Instead, when adding a child device, use a helper function much like
a bus_hint_device_unit method to look for wiring hints or to return
-1 to let the system choose a unit number. This function requires
an "at" hint for the port pointing to the nexus device and a "port"
hint listing the port number. For example:
hint.cxl.4.at="t5nex0"
hint.cxl.4.port="0"
wires cxl4 to the first port on the t5nex0 adapter.
Requested by: gallatin
MFC after: 2 months
interface into two groups. Filters can be used to match traffic
and distribute it across a group.
hw.cxgbe.nm_split_rss
Sponsored by: Chelsio Communications
subset of a VI's RSS indirection table.
This makes it possible to make groups out of rx queues and steer
different kinds of traffic to different groups. For example, an
interface with 8 rx queues could have all non-TCP traffic delivered to
queues 0-3 and all TCP traffic to queues 4-7.
Note that it is already possible for filters to steer traffic to a
particular queue or to distribute it using the full indirection table
(much like normal rx does).
Sponsored by: Chelsio Communications
The bits that explicitly request cidx updates do not work reliably with
all possible WRs that can be sent over the queue. The F_FW_WR_EQUIQ
requests that still remain may also have to be replaced with explicit
credit flush WRs in the future.
MFC after: 2 days
Sponsored by: Chelsio Communications
- Switch to using 32b port/link capabilities in the driver. The 32b
format is used internally by firmwares > 1.16.45.0 and the driver will
now interact with the firmware in its native format, whether it's 16b
or 32b. Note that the 16b format doesn't have room for 50G, 200G, or
400G speeds.
- Add a bit in the pause_settings knobs to allow negotiated PAUSE
settings to override manual settings.
- Ensure that manual link settings persist across an administrative
down/up as well as transceiver unplug/replug.
- Remove unused is_*G_port() functions.
Approved by: re@ (gjb@)
MFC after: 1 month
Sponsored by: Chelsio Communications
properly in a couple of places in the driver.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Approved by: re@ (rgrimes@)
Sponsored by: Chelsio Communications
hashfilters. Two because the driver needs to look up a hashfilter by
its 4-tuple or tid.
A couple of fixes while here:
- Reject attempts to add duplicate hashfilters.
- Do not assume that any part of the 4-tuple that isn't specified is 0.
This makes it consistent with all other mandatory parameters that
already require explicit user input.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
There used to be one control queue per adapter (the mgmtq) that was
initialized during adapter init and one per port that was initialized
later during port init. This change moves all the control queues (one
per port/channel) to the adapter so that they are initialized during
adapter init and are available before any port is up. This allows the
driver to issue ctrlq work requests over any channel without having to
bring up any port.
MFH: 2 weeks
Sponsored by: Chelsio Communications
own region in the TCAM starting with T6, unlike previous chips where
they were in the same region as normal filters.
These filters "hit" before anything else in the LE's lookup. The exact
order is:
a) High priority filters
b) TOE's active region (TCAM and/or hash)
c) Servers (TOE hw listeners)
d) Normal filters
MFC after: 1 week
Sponsored by: Chelsio Communications
traffic class for rate limiting.
Add experimental knobs that allow the user to specify a default pktsize
and burstsize for traffic classes associated with a port:
dev.<ifname>.<instance>.tc.pktsize
dev.<ifname>.<instance>.tc.burstsize
Sponsored by: Chelsio Communications
them display the current value of the bitfield rather than the fixed
value that was provided when the sysctl node was created.
MFC after: 1 week
Sponsored by: Chelsio Communications
- Ignore any type of TID where the start/end values are not in the
correct order. There are situations where the firmware isn't able to
reserve room for the number requested in the config file but doesn't
report a failure during configuration and instead sets end <= start.
- Track start/end in tid_tab and remove some redundant copies from
adapter->params.
- Move all the start/end and other read-only parameters to a quiet part
of tid_tab, away from the tid locks.
MFC after: 1 week
Sponsored by: Chelsio Communications
initializing the softc for a per-flow rate limiter. The limit happens
to be the same for both and the existing code worked by accident for
common configurations.
Reported by: gallatin@
Sponsored by: Chelsio Communications
Start in "class" instead of "flow" mode. This eliminates the need to
specify an MTU, which is not available that early anyway. It also
allows the user to manually configure ch-rl rate limiting after attach.
This used to fail because ch-rl isn't supported if cl-rl "flow" mode is
configured.
Set all traffic classes to 1Gbps during initialization. The goal is to
start off with _any_ valid configuration and 1Gbps works even for
gigabit cards.
Sponsored by: Chelsio Communications
Track session objects in the framework, and pass handles between the
framework (OCF), consumers, and drivers. Avoid redundancy and complexity in
individual drivers by allocating session memory in the framework and
providing it to drivers in ::newsession().
Session handles are no longer integers with information encoded in various
high bits. Use of the CRYPTO_SESID2FOO() macros should be replaced with the
appropriate crypto_ses2foo() function on the opaque session handle.
Convert OCF drivers (in particular, cryptosoft, as well as myriad others) to
the opaque handle interface. Discard existing session tracking as much as
possible (quick pass). There may be additional code ripe for deletion.
Convert OCF consumers (ipsec, geom_eli, krb5, cryptodev) to handle-style
interface. The conversion is largely mechnical.
The change is documented in crypto.9.
Inspired by
https://lists.freebsd.org/pipermail/freebsd-arch/2018-January/018835.html .
No objection from: ae (ipsec portion)
Reported by: jhb
- Add tracker argument to preemptible epochs
- Inline epoch read path in kernel and tied modules
- Change in_epoch to take an epoch as argument
- Simplify tfb_tcp_do_segment to not take a ti_locked argument,
there's no longer any benefit to dropping the pcbinfo lock
and trying to do so just adds an error prone branchfest to
these functions
- Remove cases of same function recursion on the epoch as
recursing is no longer free.
- Remove the the TAILQ_ENTRY and epoch_section from struct
thread as the tracker field is now stack or heap allocated
as appropriate.
Tested by: pho and Limelight Networks
Reviewed by: kbowling at llnw dot com
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16066
can time out if it's backed up due to a non-stop deluge of PAUSE frames
from a misbehaving peer. Detect this situation and toggle MPS TxEn
to allow forward progress.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
of descriptors processed. Add the ability to gather a certain maximum
number of frames in the driver's rx before waking up netmap rx. If
there aren't enough frames then netmap rx will be woken up as usual.
hw.cxgbe.nm_rx_nframes
Sponsored by: Chelsio Communications
The driver assumes the list can change (even though it does't right now)
and queries it every time the sysctl runs.
sysctl dev.<nexus>.<inst>.local_cpus
sysctl dev.<nexus>.<inst>.intr_cpus
sysctl dev.t6nex.0.local_cpus
sysctl dev.t6nex.0.intr_cpus
Sponsored by: Chelsio Communications
It was needed only for ia64 where it was implemented as a call to
bswapXX, which was always a real function. htobeXX with a constant
argument is calculated at compile-time everywhere else.
MFC after: 1 week
Sponsored by: Chelsio Communications
for a port. Fix other related issues while here:
- Require port lock for access to link_config.
- Allow 100Mbps operation by tracking the speed in Mbps. Yes, really.
- New port flag to indicate that the media list is immutable. It will
be used in future refinements.
This also fixes a bug where the driver reports incorrect media with
recent firmwares.
MFC after: 2 days
Sponsored by: Chelsio Communications
This is hardware support for the SO_MAX_PACING_RATE sockopt (see
setsockopt(2)), which is available in kernels built with "options
RATELIMIT".
Relnotes: Yes
Sponsored by: Chelsio Communications
If a socket is closed or shutdown and a partial record (or what
appears to be a partial record) is waiting in the socket buffer,
discard the partial record and close the connection rather than
waiting forever for the rest of the record.
Reported by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
An etid (ethoffload tid) is allocated for a send tag and it acquires a
reference on the traffic class that matches the send parameters
associated with the tag.
Sponsored by: Chelsio Communications
provisioned for NIC_ETHOFLD and the kernel has option RATELIMIT.
It is possible to use the chip's offload queues for normal NIC Tx and
not just TOE Tx. The difference is that these queues support out of
order processing of work requests and have a per-"flowid" mechanism for
tracking credits between the driver and hardware. This allows Tx for
any number of flows bound to different rate limits to be submitted to a
single Tx queue and the work requests for slow flows won't cause HOL
blocking for the rest.
Sponsored by: Chelsio Communications
by default.
This is the first of a series of commits that will add support for
RATELIMIT kernel option to the base if_cxgbe driver, for use with
ordinary NIC traffic "flows". RATELIMIT is already supported by t4_tom
for the fully-offloaded TCP connections that it handles.
Sponsored by: Chelsio Communications
if an error is reported while pre-processing the configuration file that
the driver attempted to use.
Also, allow the user to explicitly use the built-in configuration with
hw.cxgbe.config_file="built-in"
MFC after: 2 days
Sponsored by: Chelsio Communications
- Driver support for hardware NAT.
- Driver support for swapmac action.
- Validate a request to create a hashfilter against the filter mask.
- Add a hashfilter config file for T5.
Sponsored by: Chelsio Communications
This had been the default behavior but was changed accidentally as part
of the recent iw_cxgbe+OFED overhaul. Fix another bug in that change
while here: the global knob affects all the adapters in the system and
should be left alone by per-adapter code.
MFC after: 3 days
Sponsored by: Chelsio Communications
request, which can be used to configure hardware NAT and swapmac.
All firmwares released after Jan 2017 support this work request.
Sponsored by: Chelsio Communications
These filters reside in the card's memory instead of its TCAM and can be
configured via a new "hashfilter" subcommand in cxgbetool. Hash and
normal TCAM filters can be used together. The hardware does an
exact-match of packet fields for hash filters, unlike the masked match
performed for TCAM filters. Any T5/T6 card with memory can support at
least half a million hash filters. The sample config file with the
driver configures 512K of these, it is possible to double this to 1
million+ in some cases.
The chip does an exact-match of fields of incoming datagrams with hash
filters and performs the action configured for the filter if it matches.
The fields to match are specified in a "filter mask" in the firmware
config file. The filter mask always includes the 5-tuple (sip, dip,
sport, dport, ipproto). It can, optionally, also include any subset of
the filter mode (see filterMode and filterMask in the firmware config
file).
For example:
filterMode = fragmentation, mpshittype, protocol, vlan, port, fcoe
filterMask = protocol, port, vlan
Exact values of the 5-tuple, the physical port, and VLAN tag would have
to be provided while setting up a hash filter with the chip
configuration above.
Hash filters support all actions supported by TCAM filters. A packet
that hits a hash filter can be dropped, let through (with optional
steering to a specific queue or RSS region), switched out of another
port (with optional L2 rewrite of DMAC, SMAC, VLAN tag), or get NAT'ed.
(Support for some of these will show up in the driver in a follow-up
commit very shortly).
Sponsored by: Chelsio Communications
These firmwares and the following list of changes are from the public
ChelsioUwire-3.7.1.0 release.
T6 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================
Fixes
-----
BASE:
- Fixed traffic stall when rate-limit is modified while running traffic.
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.
ETH:
- Exit Auto-Negotiation if we don't receive base page from peer within 10s.
This fixes some cases where in we keep on restarting auto negotiation without
ever exiting, resulting in link failure.
- Fixes an issue where VF packets counter were not increasing if VF packets
coalesced WR is used by driver.
OFLD:
- Kernel and user mode NVMEoF performance enhancements.
FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.
================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================
Fixes
-----
BASE:
- For Ethernet frames less than 64B, pad them with zero bytes as per IEEE spec
(RFC 894).
- Added a new parameter iqtype to FW_IQ_CMD to identify the ingress NIC or offload
queues. This fixes an issue where driver was receiving interrupt with no new
messages in queue.
- FW_PARAMS_CMD processes all the valaid paramaters and returns value 0UL for
any unknown parameter.
OFLD:
- Fixes connection failure during SRQ reuse.
- Fixes incorrect cqe in case of WRITE with immediate operation.
FOiSCSI:
- Fixes a fw crash when wrong node-id is passed to FW_FOISCSI_CTRL_WR.
FOFCoE:
- Fixes a fw hang while creating NPIV.
Enhancements
------------
ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.
================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================
Fixes
-----
BASE:
- Fixed Rate limiting not working for 101Mbps<=rate limit<=163Mbps range.
- Fixed starting more than 32 VMs on PF4 causing firmware hang.
ETH:
- Fixed link failure due to FEC mismatch with optics.
- Fixed link failure with link toggle stress tests.
- Only BaseR FEC is supported for 50G.
- Fixed a bug in next page handling which sometimes causes link down.
- Fixed port down due to failre to read eeprom contents of some modules.
- Fixed a bug causing adapter to fail with spider configuration.
FOiSCSI:
- Fixed a bug causing login failure when connecting to multiple targets.
Enhancements
------------
BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).
ETH:
- Added support for user to contol pause negotiation during auto negotiation.
FOiSCSI:
- Added a new facility to redirect few fw events to offload rx queue
(based on driver's configration)
- Driver can ignore providing ipv6 prefix len during ipv6 address configuration.
================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================
FIXES
-----
BASE:
- Fixed an FLR failure during simulteneous power up of VM.
- Fixed an issue in vlan acl which was limiting vlan range to 1024.
ETH:
- Enabled RS-FEC for 25G active copper cable and 25GBASE-SR.
- When auto negotiation is enabled, final pause settings are resolved
based on local and peer pause settings.
- Handle NACK for an I2C access.
OFLD
- Fixed rdma connection cleanup in SO adpater.
- Fixed rdma connections during read invalidate.
- Fixed the crash when invalid BW rate is passed to fw.
- Fixed the traffic hang when BW allocation is changed from switch during traffic.
FOFCoE:
- Fixed an issue where initiator remains logged-in even after LLDP is disabled
on switch.
ENHANCEMENTS
------------
BASE:
- Added support for 248 VFs.
- Added fw driver periodic calibration for MC.
ETH:
- Added XLAUI port type support.
- Added raw mac entry deletion support (FW_VI_MAC_ID_BASED_FREE).
OFLD:
- Inline IPSec support added (flag F_FW_ULPTX_WR_DATA indicates the inline
IPSec WR).
- New work request FW_RI_RDMA_WRITE_CMPL_WR (write with completion) added to
T5 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================
Fixes
-----
BASE:
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.
ETH:
- Fixes an issue where VF packets counter were not increasing if VF packets
coalesced WR is used by driver.
OFLD:
- Fixes an issue where fw hangs if max traffic rate passed is 0.
FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.
================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================
Fixes
-----
BASE:
- For Ethernet frames less than 64B, pad them with zero bytes as per IEEE spec
(RFC 894).
- Added a new parameter iqtype to FW_IQ_CMD to identify the ingress NIC or offload
queues. This fixes an issue where driver was receiving interrupt with no new
messages in queue.
ETH:
- Pad the Ethernet packets of size less than 64B with zeros. This fixes the
incorrect checksum generation of packets less then 64B.
FOiSCSI:
- Fixes a fw crash when wrong node-id is passed to FW_FOISCSI_CTRL_WR.
FOFCoE:
- Fixes a fw hang while creating NPIV.
Enhancements
------------
ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.
================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================
Fixes
-----
BASE:
- Fixed starting more than 32 VMs on PF4 causing firmware hang.
FOiSCSI:
- Fixed a bug causing login failure when connecting to multiple targets.
Enhancements
------------
BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).
ETH:
- Added support for user to contol pause negotiation during auto negotiation.
FOiSCSI:
- Added a new facility to redirect few fw events to offload rx queue
(based on driver's configration)
- Driver can ignore providing ipv6 prefix len during ipv6 address configuration.
================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================
FIXES
-----
BASE:
- Fixed an issue in vlan acl which was limiting vlan range to 1024.
ETH:
- Corrected lane inversion logic.
- Fixed improper LED behavior in T580 cards.
- When auto negotiation is enabled, final pause settings are resolved
based on local and peer pause settings.
- Handle NACK for an I2C access.
OFLD
- Fixed rdma connections during read invalidate.
FOiSCSI:
- Fixed a connections hang when link is toggled frequently.
FOFCoE:
- Fixed an issue where initiator remains logged-in even after LLDP is disabled
on switch.
ENHANCEMENTS
------------
BASE:
- Added support for 124 VFs.
ETH:
- Added XLAUI port type support.
- Added raw mac entry deletion support (FW_VI_MAC_ID_BASED_FREE).
OFLD:
- New work request FW_RI_RDMA_WRITE_CMPL_WR (write with completion) added to
optimize NVMEoF write.
T4 Firmware
================================================================================
Version : 1.19.1.0
Date : 04/23/2018
================================================================================
Fixes
-----
BASE:
- Fixes a firmware crash in FW_ETH_TX_EO_WR handling.
- Fixes host DCB support when FW_PORT_CMD is used.
FOiSCSI:
- Fixes fw crash when trying to connect to non-existence IPv6 iSNS target.
================================================================================
Version : 1.18.9.0
Date : 03/27/2018
================================================================================
Fixes
-----
BASE:
- Added a new paramter iqtype to FW_IQ_CMD to identify the ingress NIC or
offload queues. This fixes an issue where driver was receiving interrupt with
no new messages in queue.
FOFCoE:
- Fixes a fw hang while creating NPIV.
Enhancements
------------
ETH:
- A new WR FW_ETH_TX_PKTS_VM_WR added to support VM packet coalescing.
================================================================================
Version : 1.18.4.0
Date : 02/28/2018
================================================================================
Enhancements
------------
BASE:
- Added a new firmware API to retrieve the maximum temperaturethreshold for
the chip (FW_PARAM_DEV_DIAG_MAXTMPTHRESH).
================================================================================
Version : 1.17.14.0
Date : 12/27/2017
================================================================================
FIXES
-----
BASE:
- Fixed an issue in vlan acl which was limiting vlan range to 1024.
MFC after: 3 days
Sponsored by: Chelsio Communications
Filter work requests are submitted in the nexus cdev's ioctl which then
blocks waiting for a reply. If driver detach runs in this state and
disables interrupts the ioctl will never complete and detach will hang
in destroy_cdev.
Sponsored by: Chelsio Communications
Reserve 3b in the 14b atid to identify the owner and use it to dispatch
the CPL. This allows all CPLs that use an atid to be used as shared
CPLs, although ACT_OPEN_RPL is the only one being converted in this
revision.
Sponsored by: Chelsio Communications
intended recipient of a CPL when it can't be determined solely from the
opcode. Retire the per-queue handlers for such CPLs in favor of the new
scheme.
Sponsored by: Chelsio Communications
Previously, get_keyid() was returning the address of the receive key
instead of the transmit key when renegotiating the transmit key. This
could either hang the card (if a connection was only offloading TLS TX
and thus had a receive key address of -1) or cause the connection to
fail by overwriting the wrong key (if both RX and TX TLS were
offloaded).
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
Retrieve the tag from the correct ifnet and use the provided tag
(instead of hardcoded 0xffff, implying no tag) in the routines that
process offload policy.
Submitted by: Krishnamraju Eraparaju @ Chelsio
Sponsored by: Chelsio Communications
COP allows fine-grained control on whether to offload a TCP connection
using t4_tom, and what settings to apply to a connection selected for
offload. t4_tom must still be loaded and IFCAP_TOE must still be
enabled for full TCP offload to take place on an interface. The
difference is that IFCAP_TOE used to be the only knob and would enable
TOE for all new connections on the inteface, but now the driver will
also consult the COP, if any, before offloading to the hardware TOE.
A policy is a plain text file with any number of rules, one per line.
Each rule has a "match" part consisting of a socket-type (L = listen,
A = active open, P = passive open, D = don't care) and a pcap-filter(7)
expression, and a "settings" part that specifies whether to offload the
connection or not and the parameters to use if so. The general format
of a rule is: [socket-type] expr => settings
Example. See cxgbetool(8) for more information.
[L] ip && port http => offload
[L] port 443 => !offload
[L] port ssh => offload
[P] src net 192.168/16 && dst port ssh => offload !nagle !timestamp cong newreno
[P] dst port ssh => offload !nagle ecn cong tahoe
[P] dst port http => offload
[A] dst port 443 => offload tls
[A] dst net 192.168/16 => offload !timestamp cong highspeed
The driver processes the rules for each new listen, active open, or
passive open and stops at the first match. There is an implicit rule at
the end of every policy that prohibits offload when no rule in the
policy matches:
[D] all => !offload
This is a reworked and expanded version of a patch submitted by
Krishnamraju Eraparaju @ Chelsio.
Sponsored by: Chelsio Communications
Changelist:
- Turn tx_rings and rx_rings arrays into arrays of pointers to kring
structs. This patch includes fixes for ixv, ixl, ix, re, cxgbe, iflib,
vtnet and ptnet drivers to cope with the change.
- Generalize the nm_config() callback to accept a struct containing many
parameters.
- Introduce NKR_FAKERING to support buffers sharing (used for netmap
pipes)
- Improved API for external VALE modules.
- Various bug fixes and improvements to the netmap memory allocator,
including support for externally (userspace) allocated memory.
- Refactoring of netmap pipes: now linked rings share the same netmap
buffers, with a separate set of kring pointers (rhead, rcur, rtail).
Buffer swapping does not need to happen anymore.
- Large refactoring of the control API towards an extensible solution;
the goal is to allow the addition of more commands and extension of
existing ones (with new options) without the need of hacks or the
risk of running out of configuration space.
A new NIOCCTRL ioctl has been added to handle all the requests of the
new control API, which cover all the functionalities so far supported.
The netmap API bumps from 11 to 12 with this patch. Full backward
compatibility is provided for the old control command (NIOCREGIF), by
means of a new netmap_legacy module. Many parts of the old netmap.h
header has now been moved to netmap_legacy.h (included by netmap.h).
Approved by: hrs (mentor)
IFF_UP and IFF_DRV_RUNNING out of sync. ifhwioctl in the kernel pays no
attention to the return code from the driver ioctl during SIOCSIFFLAGS
so these messages are the only indication that the ioctl was called but
failed.
MFC after: 1 week
Sponsored by: Chelsio Communications
The TCB is read using a memory window right now. A better alternate to
get self-consistent, uncached information would be to use a GET_TCB
request but waiting for a reply from hw while holding non-sleepable
locks is quite inconvenient.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14817
This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size). This is believed to be sufficent to
fully support ifconfig on 32-bit systems.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14900
Requests to modify the state of TLS connections need to be sent on the
same queue as TLS record transmit requests to ensure ordering.
However, in order to use the offload transmit queue in t4_set_tcb_field(),
the function needs to be updated to do proper flow control / credit
management when queueing a request to an offload queue. This required
passing a pointer to the toepcb itself to this function, so while here
remove the 'tid' and 'iqid' parameters and obtain those values from the
toepcb in t4_set_tcb_field() itself.
Submitted by: Harsh Jain @ Chelsio (original version)
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14871
This fixes an avoidable EINVAL when the user tries to disable AN after
the port is initialized but l1cfg doesn't have a valid speed to use.
MFC after: 1 week
Sponsored by: Chelsio Communications
Compare sbavail() with the cached sb_off of already-sent data instead of
always comparing with zero. This will correctly close the connection and
send the FIN if the socket buffer contains some previously-sent data but
no unsent data.
Reported by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
- Remove the one use of is_tls_offload() and the function. AIO special
handling only needs to be disabled when a TOE socket is actively doing
TLS offload on transmit. The TOE socket's mode (which affects receive
operation) doesn't matter, so remove the check for the socket's mode and
only check if a TOE socket has TLS transmit keys configured to determine
if an AIO write request should fall back to the normal socket handling
instead of the TOE fast path.
- Move can_tls_offload() into t4_tls.c. It is not used in critical paths,
so inlining isn't that important. Change return type to bool while here.
Sponsored by: Chelsio Communications
The TOE engine in Chelsio T6 adapters supports offloading of TLS
encryption and TCP segmentation for offloaded connections. Sockets
using TLS are required to use a set of custom socket options to upload
RX and TX keys to the NIC and to enable RX processing. Currently
these socket options are implemented as TCP options in the vendor
specific range. A patched OpenSSL library will be made available in a
port / package for use with the TLS TOE support.
TOE sockets can either offload both transmit and reception of TLS
records or just transmit. TLS offload (both RX and TX) is enabled by
setting the dev.t6nex.<x>.tls sysctl to 1 and requires TOE to be
enabled on the relevant interface. Transmit offload can be used on
any "normal" or TLS TOE socket by using the custom socket option to
program a transmit key. This permits most TOE sockets to
transparently offload TLS when applications use a patched SSL library
(e.g. using LD_LIBRARY_PATH to request use of a patched OpenSSL
library). Receive offload can only be used with TOE sockets using the
TLS mode. The dev.t6nex.0.toe.tls_rx_ports sysctl can be set to a
list of TCP port numbers. Any connection with either a local or
remote port number in that list will be created as a TLS socket rather
than a plain TOE socket. Note that although this sysctl accepts an
arbitrary list of port numbers, the sysctl(8) tool is only able to set
sysctl nodes to a single value. A TLS socket will hang without
receiving data if used by an application that is not using a patched
SSL library. Thus, the tls_rx_ports node should be used with care.
For a server mostly concerned with offloading TLS transmit, this node
is not needed as plain TOE sockets will fall back to software crypto
when using an unpatched SSL library.
New per-interface statistics nodes are added giving counts of TLS
packets and payload bytes (payload bytes do not include TLS headers or
authentication tags/MACs) offloaded via the TOE engine, e.g.:
dev.cc.0.stats.rx_tls_octets: 149
dev.cc.0.stats.rx_tls_records: 13
dev.cc.0.stats.tx_tls_octets: 26501823
dev.cc.0.stats.tx_tls_records: 1620
TLS transmit work requests are constructed by a new variant of
t4_push_frames() called t4_push_tls_records() in tom/t4_tls.c.
TLS transmit work requests require a buffer containing IVs. If the
IVs are too large to fit into the work request, a separate buffer is
allocated when constructing a work request. This buffer is associated
with the transmit descriptor and freed when the descriptor is ACKed by
the adapter.
Received TLS frames use two new CPL messages. The first message is a
CPL_TLS_DATA containing the decryped payload of a single TLS record.
The handler places the mbuf containing the received payload on an
mbufq in the TOE pcb. The second message is a CPL_RX_TLS_CMP message
which includes a copy of the TLS header and indicates if there were
any errors. The handler for this message places the TLS header into
the socket buffer followed by the saved mbuf with the payload data.
Both of these handlers are contained in tom/t4_tls.c.
A few routines were exposed from t4_cpl_io.c for use by t4_tls.c
including send_rx_credits(), a new send_rx_modulate(), and
t4_close_conn().
TLS keys for both transmit and receive are stored in onboard memory
in the NIC in the "TLS keys" memory region.
In some cases a TLS socket can hang with pending data available in the
NIC that is not delivered to the host. As a workaround, TLS sockets
are more aggressive about sending CPL_RX_DATA_ACK messages anytime that
any data is read from a TLS socket. In addition, a fallback timer will
periodically send CPL_RX_DATA_ACK messages to the NIC for connections
that are still in the handshake phase. Once the connection has
finished the handshake and programmed RX keys via the socket option,
the timer is stopped.
A new function select_ulp_mode() is used to determine what sub-mode a
given TOE socket should use (plain TOE, DDP, or TLS). The existing
set_tcpddp_ulp_mode() function has been renamed to set_ulp_mode() and
handles initialization of TLS-specific state when necessary in
addition to DDP-specific state.
Since TLS sockets do not receive individual TCP segments but always
receive full TLS records, they can receive more data than is available
in the current window (e.g. if a 16k TLS record is received but the
socket buffer is itself 16k). To cope with this, just drop the window
to 0 when this happens, but track the overage and "eat" the overage as
it is read from the socket buffer not opening the window (or adding
rx_credits) for the overage bytes.
Reviewed by: np (earlier version)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14529
- Change t4_ddp_mod_load() to return void instead of always returning
success. This avoids having to pretend to have proper support for
unloading when only part of t4_tom_mod_load() has run.
- If t4_register_uld() fails, don't invoke t4_tom_mod_unload() directly.
The module handling code in the kernel invokes MOD_UNLOAD on a module
whose MOD_LOAD fails with an error already.
Reviewed by: np (part of a larger patch)
MFC after: 1 month
Sponsored by: Chelsio Communications
Creating a UD address handle from user-space or from the kernel-space,
when the link layer is ethernet, requires resolving the remote L3
address into a L2 address. Doing this from the kernel is easy because
the required ARP(IPv4) and ND6(IPv6) address resolving APIs are readily
available. In userspace such an interface does not exist and kernel
help is required.
It should be noted that in an IP-based GID environment, the GID itself
does not contain all the information needed to resolve the destination
IP address. For example information like VLAN ID and SCOPE ID, is not
part of the GID and must be fetched from the GID attributes. Therefore
a source GID should always be referred to as a GID index. Instead of
going through various racy steps to obtain information about the
GID attributes from user-space, this is now all done by the kernel.
This patch optimises the L3 to L2 address resolving using the existing
create address handle uverbs interface, retrieving back the L2 address
as an additional user-space information structure.
This commit combines the following Linux upstream commits:
IB/core: Let create_ah return extended response to user
IB/core: Change ib_resolve_eth_dmac to use it in create AH
IB/mlx5: Make create/destroy_ah available to userspace
IB/mlx5: Use kernel driver to help userspace create ah
IB/mlx5: Report that device has udata response in create_ah
MFC after: 1 week
Sponsored by: Mellanox Technologies
After the auth key is copied into the ipad[] array, any remaining bytes
are cleared to zero (in case the key is shorter than one block size).
The full block size was used as the length of the zero rather than the
size of the remaining ipad[]. In practice this overflow was harmless as
it could only clear bytes in the following opad[] array which is
initialized with a copy of ipad[] in the next statement.
Sponsored by: Chelsio Communications
The parameters describe how much of the adapter's memory is reserved for
storing TLS keys. The 'meminfo' sysctl now lists this region of adapter
memory as 'TLS keys' if present.
Sponsored by: Chelsio Communications
This consolidates all of the DDP state in one place. Also, the code has
now been fixed to ensure that DDP state is only accessed for DDP
connections. This should not be a functional change but makes it cleaner
and easier to add state for other TOE socket modes in the future.
MFC after: 1 month
Sponsored by: Chelsio Communications
This used to work by accident with ld.bfd even though always_keepalive
was marked as static. LLD honors static more correctly, so export this
variable properly (including moving it into the tcp_* namespace).
Reviewed by: bz, emaste
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14129
Properly honor the lack of the CRD_F_IV_PRESENT flag in the GCM
software fallback case for encryption requests.
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
In particular, this avoids edge cases where a generated IV might be
written into the output buffer even though the request is failed with
an error.
Sponsored by: Chelsio Communications
- Extend ccr_gcm_soft() to handle requests with a non-empty payload.
While here, switch to allocating the GMAC context instead of placing
it on the stack since it is over 1KB in size.
- Allow ccr_gcm() to return a special error value (EMSGSIZE) which
triggers a fallback to ccr_gcm_soft(). Move the existing empty
payload check into ccr_gcm() and change a few other cases
(e.g. large AAD) to fallback to software via EMSGSIZE as well.
- Add a new 'sw_fallback' stat to count the number of requests
processed via the software fallback.
Submitted by: Harsh Jain @ Chelsio (original version)
Sponsored by: Chelsio Communications
This works around an issue in the T6 that can result in DMA engine
stalls if an error occurs while processing a DSGL entry with a length
larger than 2KB.
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
Most crypto requests will not trigger this condition, but a request
with a highly-fragmented data buffer (and a resulting "large" S/G
list) could trigger it.
Sponsored by: Chelsio Communications
The T6 can hang when processing certain AEAD requests if the request
sets a flag asking the crypto engine to discard the input IV and AAD
rather than copying them into the output buffer. The existing driver
always discards the IV and AAD as we do not need it. As a workaround,
allocate a single "dummy" buffer when the ccr driver attaches and
change all AEAD requests to write the IV and AAD to this scratch
buffer. The contents of the scratch buffer are never used (similar to
"bogus_page"), and it is ok for multiple in-flight requests to share
this dummy buffer.
Submitted by: Harsh Jain @ Chelsio (original version)
Sponsored by: Chelsio Communications
The T6 crypto engine's control messages only support a total AAD
length (including the prefixed IV) of 511 bytes. Reject requests with
large AAD rather than returning incorrect results.
Sponsored by: Chelsio Communications
Combined authentication-encryption and GCM requests already stored the
IV in the immediate explicitly. This extends this behavior to block
cipher requests to work around a firmware bug. While here, simplify
the AEAD and GCM handlers to not include always-true conditions.
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
Focus on code where we are doing multiplications within malloc(9). None of
these is likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
Unconditional 32-bit shift is not endianness-safe.
Modify the logic to work both on LE and BE.
Submitted by: Wojciech Macek <wma@freebsd.org>
Reviewed by: np
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D13102
leaves the firmware event queue (fwq) as the only queue that can take
interrupts for others.
This simplifies cfg_itype_and_nqueues and queue allocation in the driver
at the cost of a little (never?) used configuration. It also allows
service_iq to be split into two specialized variants in the future.
MFC after: 2 months
Sponsored by: Chelsio Communications
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
tunables. Add num_vis to the intrs_and_queues structure as it affects
the number of interrupts requested and queues created. In future
cfg_itype_and_nqueues might lower it incrementally instead of going
straight to 1 when enough interrupts aren't available.
Sponsored by: Chelsio Communications
The setbit/clearbit pair casts the bitfield pointer
to uint8_t* which effectively treats its contents as
little-endian variable. The ffs() function accepts int as
the parameter, which is big-endian. Use uint8_t here to
avoid mismatch, as we have only 4 doorbells.
Submitted by: Wojciech Macek <wma@freebsd.org>
Reviewed by: np
Obtained from: Semihalf
Sponsored by: QCM Technologies
Differential revision: https://reviews.freebsd.org/D13084
different from hardware defaults. The congestion channel map, which is
still fixed, needs to be tracked separately now. Change the congestion
setting for TOE rx queues to match the drivers on other OSes while here.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
iWarp and RoCE in ibcore. The selection of RDMA_PS_TCP can not be used
to indicate iWarp protocol use. Backport the proper IB device
capabilities from Linux upstream to distinguish between iWarp and
RoCE. Only allocate the additional socket required for iWarp for RDMA
IDs when at least one iWarp device present. This resolves
interopability issues between iWarp and RoCE in ibcore
Reviewed by: np @
Differential Revision: https://reviews.freebsd.org/D12563
Sponsored by: Mellanox Technologies
MFC after: 3 days
r324539 gathered some vnet decls into netinet/tcp_var.h, so that they
are now redundant in dev/cxgbe/tom/{t4_cpl_io.c,t4_ddp.c}. This triggers
gcc -Wredundant-decls.
Reviewed by: np
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12674
All of these arguments are stored in m_ext, so there is no reason
to pass them in the argument list. Not all functions need the second
argument, some don't even need the first one. The second argument
lives in next cache line, so not dereferencing it is a performance
gain. This was discovered in sendfile(2), which will be covered by
next commits.
The second goal of this commit is to bring even more flexibility
to m_ext mbufs, allowing to create more fields in m_ext, opaque to
the generic mbuf code, and potentially set and dereferenced by
subsystems.
Reviewed by: gallatin, kbowling
Differential Revision: https://reviews.freebsd.org/D12615
Changes since 1.16.26.0 for all three firmwares are listed below. This
list was obtained from the Release Notes of the Chelsio Unified Wire
v3.5.05 release for Linux.
T6 Firmware
++++++++++++
================================================================================
Version : 1.16.63.0
Date : 09/29/2017
================================================================================
Fixes
-----
BASE:
- Fixed a fw crash when configured traffic rate limit is less than 10kbps.
- Fixed traffic rate limiting for smaller traffic rate value.
ETH:
- Fixed 40G link failure when interface is toggled.
- Fixed adapter crash when interface is toggled during traffic.
- Fixed 25G link failure when PEER only supports consortium mode autoneg
for 25G.
- Fixed 100G optics link failure when cable is plugged in after bringing up
the interface.
- Enable RS FEC as default if speed is 100G.
- Fixed DCBX configuration refresh failure.
OFLD
- Fixed 0B iWARP ingress read failure.
- Fixed iWARP SRQ reuse failure.
FOiSCSI:
- Fixed vlan interface ping failure.
- Fixed target discovery failures.
- Fixed mutual chap login failure.
================================================================================
Version : 1.16.59.0
Date : 09/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed fw crash caused by MC parity error in SO adapters.
- Generate Timer0Int interrupt if fw crashes due to unaligned access error. Host
driver must look into PCIE_FW register to see if any fw fatal error has
encountered. If PCIE_FW doesn't indicate any error then driver must ignore this
interrupt.
- Fixed receive buffer threshold settings which was resulting in error frames on
receive side.
ETH:
- Fixed an issue in connection traffic shaping when
FLOWC_WR->FW_FLOWC_MNEM_SCHEDCLASS is not received in first WR on the connection.
- Fixed link failure when speed is changed from 10G-1G-10G due to incorrect flag
check.
- Fixed improper LED behaviour for blink test and when traffic is running.
- Removed storage of previous fec settings from fw. Driver needs to pass the user
settings whenever a new module is plugged in as fw resets these when a module is
unplugged.
OFLD
- OVS offload: TP cache is flushed periodically to get the accuate filters stats
(hit count).
ENHANCEMENTS
------------
BASE:
- Ring backbone feature added. New FW_PARAMS_PARAM_DEV_RING_BACKBONE param type
added to query and enable ring backbone support.
- VNI support added for filtering. New entry_type FW_VI_MAC_TYPE_EXACTMAC_VNI
added to FW_VI_MAC_CMD.
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer group
mapping for the ports.
- FW_PARAMS_PARAM_DEV_TPCHMAP API added to read the port to channel mapping.
- HMA (Host memory access) support added. New FW_HMA_CMD and
FW_PARAMS_PARAM_DEV_HMA_SIZE added to query and configure the HMA. It
enables the memfree support (256 connections) for iwarp.
- PTP support enabled.
ETH:
- Added consortium mode 50G support.
- Added the ability to allow only selected speeds to be advertised during auto
negotiation.
- Increased port capability from 16 to 32 bits to support more speeds.
FW_PARAMS_PARAM_PFVF_PORT_CAPS32 added to query whether fw supports 16 or 32
bit port capability.
OFLD:
- RDMA Write with immediate support added (iwarp 2.0 feature)
- FW_TLS_KEYCTX_TX_WR removed and security key management moved to driver.
- 256 offloaded connections support for iwarp on SO adapters.
iSCSI:
- New param FW_PARAMS_PARAM_DEV_PPOD_EDRAM added for iscsi ppod configuration
in EDRAM (performance improvement).
FOiSCSI:
- iSCSI Command offload target support added.
FOFCoE:
- FCoE support enabled.
================================================================================
Version : 1.16.43.0
Date : 05/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed default DCB mode to AUTO.
- Fixed DCBX bugs when AUTO mode is configured in config file.
- Fixed an issue where even after removing PFC from switch, PFC wasn't getting
reset.
- Fixed DDR3/DDR4 ECC errors.
- Fixed an FLR issue where FLR completion was going to host before FLR
processing is finished in fw.
ETH:
- Fixed bug in writing multi-bytes using i2c interface.
- Fixed the link failure when optical cable is inserted into the QSA module
after loading the driver.
- Fixed false link up when peer interface was brought down.
- Enabling RS FEC by default for 100Gbase-SR4 according to 802.3BJ standard.
- Fixed bugs related to negotiated fec based local/peer fec ability and request.
- Fixed auto-neg failure with few switches.
- T6 Performance improvement fixes.
OFLD
- Fixed an extra credit issue if FW_RI_TYPE_FINI is delayed in fw due to
backpressure.
- Added a new queue type FW_IQ_TYPE_VF_CQ to handle the FW_PARAMS_PARAM_DMAQ*
commands. queue type will be part of the FW_PARAMS_PARAM_DMAQ_IQ_INTIDX
value. Used in guest RDMA (RDMA from VM/VF) usecase.
- T6 Crypto Coprocessor mode bug fixes.
- T6 Crypto TLS-inline mode bug fixes.
ENHANCEMENTS
------------
BASE:
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer
group mapping for the ports.
ETH:
- Added broadcom consortium next page support for 25G CR.
This can be enabled using flags=an_brcm option in the t6-config.txt file.
- Added spider mode support.
- Added support for 10G-BaseT converter sfp+ module.
- Added support for additional 25G/100G cables.
- Added support to enable/disable auto-neg using ethtool.
================================================================================
Version : 1.16.33.0
Date : 02/24/2017
================================================================================
Fixes
-----
BASE:
- Fixed DDR4 uncorrectable errors.
ETH:
- Enabled link auto negotiation (AN) by default in config file.
- Added AN and FEC control api. Host driver and application can enable/disable
AN and FEC.
ENHANCEMENTS
------------
BASE:
- Enabled High priorty filter.
- Added T6425 adapter support.
ETH:
- Added new workrequest ETH_TX_PKTS2_WR (see fw api document for more details).
================================================================================
Version : 1.16.29.0
Date : 01/27/2017
================================================================================
FIXES
-----
BASE:
- Set multiple fec values only if AN is enabled in config file and when module
is connected.
- Fixed intermittent DDR3/4 ECC errors.
- max number of ethctrl queue in VF set to 2 (reverted the last change
because it causes problem in VF drivers).
ETH:
- Made devlog more verbose by printing cable information in redable form.
- Updated AN settings to work with more 25G/100G switches.
- Added support for more SFP28/QSFP28 cables.
- Fixed an issue of link going down after few hours of idle time.
OFLD:
- Fixed an issue in TLS which was causing fw crash on running TLS traffic.
FOiSCSI:
- Fixed the failure of PXE boot OS install on an iscsi lun.
ENHANCEMENTS
------------
OFLD:
- Added filtering support for NAT. New WR FW_FILTER2_WR and
FW_PARAMS_PARAM_DEV_FILTER2_WR added for the same.
- Added RDMA guest mode (mode 3 or RDMA from VF) support.
================================================================================
T5 Firmware
++++++++++++
================================================================================
Version : 1.16.63.0
Date : 09/29/2017
================================================================================
Fixes
-----
BASE:
- Fixed offload memory overcommit in case of SO adapter.
ETH:
- Fixed DCBX configuration refresh failure.
OFLD
- Fixed 0B iWARP ingress read failure.
FOiSCSI:
- Fixed vlan interface ping failure.
================================================================================
Version : 1.16.59.0
Date : 09/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed an FLR issue which was causing error when VF attached VM was powered on.
ETH:
- Fixed an issue in connection traffic shaping when
FLOWC_WR->FW_FLOWC_MNEM_SCHEDCLASS is not received in first WR on the connection.
- Fixed link failure when speed is changed from 10G-1G-10G due to incorrect flag
check.
- Fixed T580 link failure with few switches which take more time for
establishing link.
ENHANCEMENTS
------------
BASE:
- Ring backbone feature added. New FW_PARAMS_PARAM_DEV_RING_BACKBONE param type
added to query and enable ring backbone support.
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer group
mapping for the ports.
- FW_PARAMS_PARAM_DEV_TPCHMAP API added to read the port to channel mapping.
FOiSCSI:
- iSCSI Command offload target support added.
================================================================================
Version : 1.16.43.0
Date : 05/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed default DCB mode to AUTO.
- Fixed DCBX bugs when AUTO mode is configured in config file.
- Fixed an issue where even after removing PFC from switch, PFC wasn't getting
reset.
ETH:
- Fixed bug in writing multi-bytes using i2c interface.
- Fixed the link failure when optical cable is inserted into the QSA module
after loading the driver.
OFLD
- Fixed an extra credit issue if FW_RI_TYPE_FINI is delayed in fw due to
backpressure.
- Added a new queue type FW_IQ_TYPE_VF_CQ to handle the FW_PARAMS_PARAM_DMAQ*
commands. queue type will be part of the FW_PARAMS_PARAM_DMAQ_IQ_INTIDX
value. Used in guest RDMA (RDMA from VM/VF) usecase.
ENHANCEMENTS
------------
BASE:
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer
group mapping for the ports.
================================================================================
Version : 1.16.33.0
Date : 02/24/2017
================================================================================
ENHANCEMENTS
------------
ETH:
- Added new workrequest ETH_TX_PKTS2_WR (see fw api document for more details).
================================================================================
Version : 1.16.29.0
Date : 01/27/2017
================================================================================
FIXES
-----
BASE:
- max number of ethctrl queue in VF set to 2 (reverted the last change
because it causes problem in VF drivers).
FOiSCSI:
- Fixed the failure of PXE boot OS install on an iscsi lun.
ENHANCEMENTS
------------
OFLD:
- Added filtering support for NAT. New WR FW_FILTER2_WR and
FW_PARAMS_PARAM_DEV_FILTER2_WR added for the same.
- Added RDMA guest mode (mode 3 or RDMA from VF) support.
================================================================================
T4 Firmware
+++++++++++
================================================================================
Version : 1.16.63.0
Date : 09/29/2017
================================================================================
Fixes
-----
ETH:
- Fixed DCBX configuration refresh failure.
FOiSCSI:
- Fixed vlan interface ping failure.
================================================================================
Version : 1.16.59.0
Date : 09/05/2017
================================================================================
FIXES
-----
ETH:
- Fixed an issue in connection traffic shaping when
FLOWC_WR->FW_FLOWC_MNEM_SCHEDCLASS is not received in first WR on the connection.
ENHANCEMENTS
------------
BASE:
- FW_PARAMS_PARAM_DEV_TPCHMAP API added to read the port to channel mapping.
================================================================================
Version : 1.16.43.0
Date : 05/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed default DCB mode to AUTO.
- Fixed DCBX bugs when AUTO mode is configured in config file.
- Fixed an issue where even after removing PFC from switch, PFC wasn't getting
reset.
ETH:
- Fixed bug in writing multi-bytes using i2c interface.
OFLD
- Fixed an extra credit issue if FW_RI_TYPE_FINI is delayed in fw due to
backpressure.
- Added a new queue type FW_IQ_TYPE_VF_CQ to handle the FW_PARAMS_PARAM_DMAQ*
commands. queue type will be part of the FW_PARAMS_PARAM_DMAQ_IQ_INTIDX
value. Used in guest RDMA (RDMA from VM/VF) usecase.
ENHANCEMENTS
------------
BASE:
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer
group mapping for the ports.
Obtained from: Chelsio Communications
MFC after: 2 weeks
Sponsored by: Chelsio Communications
To optimize the case of ping-ponging between two buffers, the DDP code
caches the last two buffers used keeping the pages wired and page pods
stored in the NIC's RAM. If a new aio_read() request uses one of the
same buffers, then the work of holding pages, etc. can be avoided.
However, the starting virtual address of an aio buffer was not saved,
only the page count, length, and initial page offset. Thus, an
aio_read() request could match a different buffer in the address
space. (Earlier during development vm_fault_hold_quick_pages() was
always called and the vm_page_t values were compared, but that was
eventually removed without being adequately replaced.) Fix by storing
the starting virtual address and comparing that (along with other
fields) to determine if a buffer can be reused.
MFC after: 3 days
Sponsored by: Chelsio Communications
The bad_session, sglist_error, and process_error sysctl nodes were
returning the value of the pad_error node instead of the appropriate
error counters.
Sponsored by: Chelsio Communications
- start_wrq_wr must not drain the wr_list if there are incomplete_wrs
pending. This can happen when a t4_wrq_tx runs between two
start_wrq_wr.
- commit_wrq_wr must examine the cookie's pidx and ndesc with the
queue's lock held. Otherwise there is a bad race when incomplete WRs
are being completed and commit_wrq_wr for the WR that is ahead in the
queue updates the next incomplete WR's cookie's pidx/ndesc but the
commit_wrq_wr for the second one is using stale values that it read
without the lock.
MFC after: 1 week
Sponsored by: Chelsio Communications
t4_tom picks it up right away. This is less work than waiting for
the connection to be established before applying the setting.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
used by the TOE hardware for fully offloaded connections. The knob
affects new connections only.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
install after full initialization, and another to disable the TCB
cache (T6+). The latter works as a tunable only.
Note that debug_flags are for debugging only and should not be set
normally.
MFC after: 1 week
Sponsored by: Chelsio Communications
These firmwares come from a pre-release snapshot. The final firmwares
in this Chelsio release cycle will likely be .61.0 or later and those
will be the next "long lived" firmwares in FreeBSD head and stable
branches. .59 is being provided in head (only) for wider test exposure.
Obtained from: Chelsio Communications
Sponsored by: Chelsio Communications
creating hardware VIs.
This fixes a bad race on systems with hw.cxgbe.num_vis > 1.
Reported by: olivier@
MFC after: 1 week
Sponsored by: Chelsio Communications
the current state to determine whether to generate a link-state change
notification. This fixes a bug introduced in r321063 that caused the
driver to sometimes skip these notifications.
Reported by: Jason Eggleston @ LLNW
MFC after: 3 days
Sponsored by: Chelsio Communications
precision. These timers are already displayed in microseconds in the
sysctl MIB. Add variables to track these tunables while here.
MFC after: 3 days
Sponsored by: Chelsio Communications
debug (cudbg) code, hooked up to the main driver via an ioctl.
The ioctl can be used to collect the chip's internal state in a
compressed dump file. These dumps can be decoded with the "view"
component of cudbg.
Obtained from: Chelsio Communications
MFC after: 2 months
Sponsored by: Chelsio Communications
and keepalive in the sysctl MIB. Provide tunables to change some of
these parameters. These are supposed to be setup by the firmware so
these tunables are for experimentation only.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
doesn't seem to have one. This lets the driver recover automatically
from incomplete firmware upgrades (panic, reboot, power loss, etc. in
the middle of an upgrade).
MFC after: 2 weeks
Sponsored by: Chelsio Communications
- Deal with changes to port_type, and not just port_mod when a
transceiver is changed. This fixes hot swapping of transceivers of
different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or
SFP28 in a SFP28 port, etc.).
- Always refresh media information for ifconfig if the port is down.
The firmware does not generate tranceiver-change interrupts unless at
least one VI is enabled on the physical port. Before this change
ifconfig diplayed potentially stale information for ports that were
administratively down.
- Always recalculate and reapply L1 config on a transceiver change.
- Display PAUSE settings in ifconfig. The driver sysctls for this
continue to work as well.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
the "effective MSS" for the connection. The chip expects it this way.
Submitted by: Krishnamraju Eraparaju @ Chelsio
MFC after: 3 days
Sponsored by: Chelsio Communications
Do not attempt to initialize netmap queues that are already initialized
or aren't supposed to be initialized. Similarly, do not free queues
that are not initialized or aren't supposed to be freed.
PR: 217156
Sponsored by: Chelsio Communications
