Before my ZIL space optimization few years ago 128KB writes were logged
as two 64KB+ records in two 128KB log blocks. After that change it became
~124KB+/4KB+ in two 128KB log blocks to free space in the second block
for another record. Unfortunately in case of 128KB only writes, when space
in the second block remained unused, that change increased write latency by
imbalancing checksum computation time between parallel threads.
This change introduces new 68KB log block size, used for both writes below
67KB and 128KB-sharp writes. Writes of 68-127KB are still using one 128KB
block to not increase processing overhead. Writes above 131KB are still
using full 128KB blocks, since possible saving there is small. Mixed loads
will likely also fall back to previous 128KB, since code uses maximum of
the last 10 requested block sizes.
On a simple 128KB write test with queue depth of 1 this change demonstrates
~15-20% performance improvement.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This adds 8 and 16 bit versions of the cmpset and fcmpset functions. Macros
are used to generate all the flavors from the same set of instructions; the
macro expansion handles the couple minor differences between each size
variation (generating ldrexb/ldrexh/ldrex for 8/16/32, etc).
In addition to handling new sizes, the instruction sequences used for cmpset
and fcmpset are rewritten to be a bit shorter/faster, and the new sequence
will not return false when *dst==*old but the store-exclusive fails because
of concurrent writers. Instead, it just loops like ldrex/strex sequences
normally do until it gets a non-conflicted store. The manpage allows LL/SC
architectures to bogusly return false, but there's no reason to actually do
so, at least on arm.
Reviewed by: cognet
This avoids PATH conflicts with a real httpd, as a user will likely almost
always prefer the more fully-featured httpd. This also lines up with the
historical name of the program.
work. More precisely, it doesn't set ATTR_AP(ATTR_AP_USER) in the page
table entry, so any attempt to read from the mapped page by user space
generates a page fault. This problem has gone unnoticed because the page
fault handler, vm_fault(), will ultimately call pmap_enter(), which
replaces the non-working page table entry with one that has
ATTR_AP(ATTR_AP_USER) set.
This change reduces the number of page faults during a "buildworld" by
about 19.4%.
Reviewed by: andrew, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21841
picobsd/tinyware has had this compact HTTPD server for a long time, and some
people do use it. Move it out into usr.sbin well in advance of any action
being taken on picobsd.
This has been gated behind an HTTPD option defaulted to *off*, primarily for
two reasons:
1.) This code likely needs a good audit, as it's been living off in picobsd
land for a long time, and
2.) We don't currently ship an httpd and this may not be a welcome surprise.
Reviewed by: eugen
Differential Revision: https://reviews.freebsd.org/D21724
Currently only suspend requests are acknowledged by writing an empty
string back to the xenstore control node, but poweroff or reboot
requests are not acknowledged and FreeBSD simply proceeds to perform
the desired action.
Fix this by acknowledging all requests, and remove the suspend specific
ack done in the handler.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Normally, count=n means read(2) will be called n times on the input to dd. If
the read() returns short, as may happen when reading from a pipe, fewer bytes
will be copied from the input. With conv=sync the buffer is padded with zeros
to fill the rest of the block.
iflag=fullblock causes dd to continue reading until the block is full, so that
count=n means n full blocks are copied. This flag is compatible with illumos
and GNU dd and is used in the ZFS test suite.
Submitted by: Ryan Moeller
Reviewed by: manpages, mmacy@
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D21441
Sets the O_FSYNC flag on the output file. oflag=fsync and oflag=sync are
synonyms just as O_FSYNC and O_SYNC are synonyms. This functionality is
intended to improve portability of dd commands in the ZFS test suite.
Submitted by: Ryan Moeller
Reviewed by: manpages, mmacy@
MFC after: 1 week
Sponsored by: iXsytems, Inc.
Differential Revision: https://reviews.freebsd.org/D21422
close(2) can return errors from previous operations which should not be ignored.
PR: 229616
Submitted by: Thomas Hurst
Reported by: Thomas Hurst
Reviewed by: mmacy@
Obtained from: Ryan Moeller
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21376
The fdatasync flag performs an fdatasync(2) on the output file before closing it.
This will be useful for the ZFS test suite.
Submitted by: Ryan Moeller
Reviewed by: manpages, mmacy@
MFC after: 1 week
Sponsored by: iXSystems, Inc.
Differential Revision: https://reviews.freebsd.org/D21373
[X86] Check MI.isConvertibleTo3Addr() before calling
convertToThreeAddress in X86FixupLEAs.
X86FixupLEAs just assumes convertToThreeAddress will return nullptr
for any instruction that isn't convertible.
But the code in convertToThreeAddress for X86 assumes that any
instruction coming in has at least 2 operands and that the second one
is a register. But those properties aren't guaranteed of all
instructions. We should check the instruction property first.
Pull in r365720 from upstream llvm trunk (by Craig Topper):
[X86] Don't convert 8 or 16 bit ADDs to LEAs on Atom in FixupLEAPass.
We use the functions that convert to three address to do the
conversion, but changing an 8 or 16 bit will cause it to create a
virtual register. This can't be done after register allocation where
this pass runs.
I've switched the pass completely to a white list of instructions
that can be converted to LEA instead of a blacklist that was
incorrect. This will avoid surprises if we enhance the three address
conversion function to include additional instructions in the future.
Fixes PR42565.
This should fix assertions/segfaults when compiling certain ports with
CPUTYPE=atom.
PR: 240928
MFC after: 3 days
As of r347221 the iflib legacy interrupt mode setup assumes that drivers
perform both receive and transmit processing from the interrupt handler.
This assumption is invalid in the vmxnet3 driver, so introduce the
IFLIB_SINGLE_IRQ_RX_ONLY flag to make iflib avoid tx processing in the
interrupt handler.
PR: 239118
Reported and tested by: Juraj Lutter <otis@sk.freebsd.org>
Obtained from: marius
Reviewed by: gallatin
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21831
Calculate binary file offset using address field, bacause software know only offset to known data, not where to load segment.
With that patch, kernel .data section can have any alignment/offset - kernel boor fine.
PR: 235391
Reviewed by: markj
MFC after: 1 month
Differential Revision: D21827
pv list lock is the main bottleneck during poudriere -j 104 and
pmap_remove_pages is the most impactful consumer. It frees chunks with the lock
held even though it plays no role in correctness. Moreover chunks are often
freed in groups, sample counts during buildkernel (0-sized frees removed):
value ------------- Distribution ------------- count
0 | 0
1 | 8
2 |@@@@@@@ 19329
4 |@@@@@@@@@@@@@@@@@@@@@@ 58517
8 | 1085
16 | 71
32 |@@@@@@@@@@ 24919
64 | 899
128 | 7
256 | 2
512 | 0
Thus:
1. batch freeing
2. move it past unlocking pv list
Reviewed by: alc (previous version), markj (previous version), kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21832
including the TCP header in the first IP packet.
Enforce this in tcp_output(). In addition make sure that at least
one byte payload fits in the TCP segement to allow making progress.
Without this check, a kernel with INVARIANTS will panic.
This issue was found by running an instance of syzkaller.
Reviewed by: jtl@
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D21665
This API is still young enough that I would expect no one to be dependant on
this yet... Swap the ordering while it's young to match Linux values to
potentially ease implementation of linuxolator syscall, being able to reuse
existing constants.
r347183 bumped GEOM classes to SI_ORDER_SECOND to resolve a race between
them and the initialization of devsoftc.mtx in devinit, but missed this
dependency on g_flashmap that may now lose the race against GEOM
classes/g_init.
There's a great comment that describes the situation that has also been
updated with the new ordering of GEOM classes.
Reported by: bdragon
MFC after: 4 days
This driver is for the usb phy present on rockchip SoC.
It only support RK3399 and host mode for now.
The driver expose the usb clock needed by the usb controller.
On rockchip board it seems that the value in the DTS
are not enough for reseting the chip, I don't know if
the value are really incorrect or if DELAY is not precise
enough or if the rockchip gpio driver have some "lag" of some
kind or not.
For now just add more delay.
Module resets where not implemented when rockchip clocks were commited.
Implement them.
Since all resets registers are contiguous a driver only need to give
the start offset and the number of resets. This avoid to have to declare
every resets.
