Print a separate "Additional routing options" line for each address family
which has additional options, so that it does not get mixed up with the
output from adding routes.
This also reverts r224048 which added newlines to two arbitrary routing
options.
Specifics:
* add 4920MHz-4980MHz for 11a and 11n/HT20
* add 5040MHz-5080MHz for 11a and 11n/HT20
* add 5500MHz-5700MHz for 11a and 11n/HT20 (DFS needed)
* add 5500MHz-5680MHz for 11n/HT40 (DFS needed)
TODO:
* add correct HT40 bands for 4920-4980 and 5040-5080
For the curious:
There's been many revisions to the Japan regulatory rules.
Apparently, the requirements require old cards certified on a previous
version of the rules to obey the older rules, not the newer rules.
The regdomain.xml outlines the -current- restrictions.
The card driver (eg the ath_hal regulatory domain code) may include
previous revisions of the Japan rules.
The ath_hal regdomain code populates the initial channel list based on
what the EEPROM indicates is possible. The regdomain.xml database imposes
further restrictions on this.
So regdomain.xml only needs to have the -current- rules. If the card
was certified on an earlier set of JP rules, it may only support a subset
of those channels - these are calculated at device attach and this
restricted list is kicked to net80211. regdomain.xml operates on -this-
list of channels.
And thus, the correct regulatory behaviour for Japan is handled with only
one regdomain.xml Japan database entry.
(phew.)
Obtained from: Linux wireless-regdb
longer used by /etc/rc.d/nfsd and it is no longer necessary
to load the old nfs server by default, when nfs_server_enable="YES".
Tested by: sgk at troutmask.apl.washington.edu
Reviewed by: rc (Andrzej Tobola)
latter.
It appears that the addition to uath(4) came in through PR kern/135009,
which had tested another device, the SMCWUSBTG2, successfully with uath(4)
and included the SMCWUSBG as it "has the same chipset". I can find no
other evidence that these two do actually share the same chipset. Moreover,
Linux treats the SMCWUSBG as a zyd(4) device also.
This reverts r223537.
Discussed with: hselasky, kevlo
MFC after: 1 week
parameters accepting them (such as description, group).
Changes discussed on freebsd-rc.
PR: conf/156675
Reported by: "Alexander V. Chernikov" <melifaro att ipfw ru>
Suggested by: hrs
Analyzed with: Alexander V. Chernikov via IRC
MFC after: 2 weeks
With the current sh, placing eval in a command substitution always results
in a fork(), even if it is the only command and only executes a single
simple command. Therefore, avoid it where it can be avoided easily.
Side effect: values starting with a hyphen and all whitespace are preserved.
The values are defaults and names for rc.conf variables and messages to be
given about obsolete ones.
MFC after: 2 weeks
This knob removes the tools that are exclusively used to view and
maintain the databases maintained by utmpx, namely last, users, who,
wtmpcvt, ac, lastlogin and utxrm.
The tool w is not in this list, because it has some other functionality
which is unrelated to utmpx; it is hardlinked to the uptime tool.
The WITHOUT_ACCT switch is supposed to omit tools related to process
accounting, namely accton and sa. ac(8) is just a simple tool that
prints statistics based on data in the utx.log database. It has nothing
to do with the former.
to avoid causing errors in the shell script.
Submitted by: William Grzybowski <william88@gmail.com>
Approved by: kib (mentor)
MFC after: 7 days
Sponsored by: iXsystems
If not specified, network.subr will add it automatically if we have
INET support (1).
In network.subr only call the address family up/down functions
if the respective AF is available.
Switch to new kern.features variables for inet and inet6 as the
inet sysctl tree is also available for IPv6-only kernels leading
to unexpected results.
Suggested by: hrs (1)
Reviewed by: hrs
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 20 days
Now that printf(1) is a shell builtin, there is no need to emulate it
anymore. The external printf(1) is /usr/bin/printf and therefore may not be
available in early boot.
It may be faster to use printf directly but the function is useful for
compatibility.
2. Add the -H flag to tar in case /var/db/pkg itself is a symlink
3. Direct stderr to /dev/null to suppress the leading slash warning [1]
PR: ports/156810 [1]
Submitted by: Jeremy Chadwick <freebsd@jdc.parodius.com> [1]
tell that there is a separate email or that the output is logged to a file.
This commit changes the return code for the non-inline case to tell that
this message is not important enough and can be masked if necessary. The
messages from the security checks themself are not affected by this and
show up as before in the periodic security email/file.
The inline case still requests to not mask the output, as with the current
way of handling this there is no easy way to handle this.
PR: 138692
Analysis/patch atch by: Chris Cowart <ccowart@timesinks.net>
X-MFC after: on request
early_late_divider in the second run (and thus be skipped altogether),
keep a list of the scripts run early, and use that list to skip things
in the second run.
This has the primary benefit of not skipping a local script that gets
ordered too early in the second run. It also gives an opportunity to
clean up/simplify the code a bit.
Use a space-separated list rather than the more traditional colon for
maximum insurance against creativity in local naming conventions.
Reviewed by: brooks
can use the "-o" option to force the old NFS server to run.
Running the old NFS server is enabled by setting
oldnfs_server_enable="YES". The scripts will only enable
providing service for NFSv4 if nfsv4_server_enable="YES"
is set.
Reviewed by: dougb (rc)
times mount is called.
Limit the automatic behavior to when AUTO is specified (as it is in
etc/defaults/rc.conf) and for everything else take advantage of all
of the goodness in checkyesno.
like, determines the path to a pid file as it is specified in a conf file.
Use the new feature for rc.d/named and rc.d/devd, the 2 services in the
base that list their pid files in their conf files.
Remove the now-obsolete named_pidfile, and warn users if they have it set.
that is running even though not _enable'd had an annoying side effect.
If the service was already started at boot time by another means when
the related script came around again in rcorder it would start again,
regardless of _enable, because there was a valid pid. [1]
So, split the test into 2 parts, one for (!rcvar && !stop), and one
for (stop && !valid_pid). This preserves the behavior from r206686
while preventing the undesired side effect.
PR: conf/156427 [1]
Submitted by: Eugene Grosbein <eugen@grosbein.pp.ru> [1]
{readline,history}.h are in /usr/include/edit so as to not conflict with
the GNU libreadline versions. To use the libedit readline(3) one should
add "-I/usr/include/edit" to their Makefile
(spelled "-I${DESTDIR}/${INCLUDEDIR}/edit" within the FreeBSD source tree).
* Enable its use in the BSD licensed utilities that support readline(3).
* To make it easier to sync libedit development with NetBSD, histedit.h
is moved into libedit's directory as history shows shown we keep merging
it into that location.
Obtained from: NetBSD
Sponsored by: Juniper Networks
The final product contains work from the originator, and
Florent Thoumie <florent.thoumie@gmail.com>. The final
product contains considerable re-working by me, so all
responsibility for bugs rests under my pointy hat.
PR: ports/145957
Submitted by: Eitan Adler <EitanAdlerList@gmail.com>
Add new RAID GEOM class, that is going to replace ataraid(4) in supporting
various BIOS-based software RAIDs. Unlike ataraid(4) this implementation
does not depend on legacy ata(4) subsystem and can be used with any disk
drivers, including new CAM-based ones (ahci(4), siis(4), mvs(4), ata(4)
with `options ATA_CAM`). To make code more readable and extensible, this
implementation follows modular design, including core part and two sets
of modules, implementing support for different metadata formats and RAID
levels.
Support for such popular metadata formats is now implemented:
Intel, JMicron, NVIDIA, Promise (also used by AMD/ATI) and SiliconImage.
Such RAID levels are now supported:
RAID0, RAID1, RAID1E, RAID10, SINGLE, CONCAT.
For any all of these RAID levels and metadata formats this class supports
full cycle of volume operations: reading, writing, creation, deletion,
disk removal and insertion, rebuilding, dirty shutdown detection
and resynchronization, bad sector recovery, faulty disks tracking,
hot-spare disks. For Intel and Promise formats there is support multiple
volumes per disk set.
Look graid(8) manual page for additional details.
Co-authored by: imp
Sponsored by: Cisco Systems, Inc. and iXsystems, Inc.
to repeatedly read the conf files. Depending on what is enabled the
files are being read anywhere from 15, 30, or more times currently.
By loading the values in the environment this is reduced to 1, with
perhaps a couple more, again depending on what is enabled.
The speed-up for boot and shutdown is negligible when rc.conf is
on local disk, noticable when accessing files over NFS, and dramatic
when pulling rc.conf values from a database.
This change also includes a minor optimization to the conditional
for $_rc_conf_loaded.
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
The old version had a race between the time that the old file was
cp'ed to acct.0 and the time that 'sa -s' was run that prevented
the commands that occurred in the meantime from being backed up.
It's also arguable that the old version was inefficient in using
cp which can be a problem on a space-constrained system.
This version avoids both problems, albeit it's considerably more
complicated. The advantage of putting the log rotation in the rc.d
script is that it can handle the _enable and _file questions without
having to do gymnastics to discover either value in the periodic script.
As a side effect of reviewing the rc.d script I cleaned it up a bit.
A full featured groff is required during buildworld, so build it always
and don't rely on it being present on the host system.
vgrind(1) is tightly coupled to a roff processor and will not be
built/installed when groff is disabled. Also much of the roff'ed
documentation under share/doc will not be built/installed when
WITHOUT_GROFF is defined.
Reviewed by: ru (partial)
pc-sysinstall) a replacement for sysinstall in the 9.0 release and beyond.
Currently supported platforms are sparc64, pc98, i386, amd64, powerpc, and
powerpc64. Integration into the build system will occur in the coming
weeks.
Merging with pc-sysinstall will use this code as a frontend, while
temporarily retaining the interactive partition editor here. This work
will be done in parallel with improvements on this code and release
integration.
Thanks to all who have provided testing and comments!
zpool the output causes the script to bail out with syntax errors.
Since a scrub of a faulted zpool is pointless, just skip over any pools
marked as such.
PR: conf/150228
Submitted by: jpaetzel
Approved by: kib (mentor)
MFC after: 3 days
MFC note: only for RELENG_8
While I'm here, don't run the sysctl frob unconditionally, and
s/sysctl/$SYSCTL/
PR: conf/153460 [1]
Submitted by: Grigory Rechistov <ggg_mail@inbox.ru>
and configure minimal target addresses & notifications needed for bsnmpd(1)
to send SNMPv3 notifications.
Sponsored by: The FreeBSD Foundation
Reviewed by: philip
Approved by: philip
snmp_vacm modules and minimal user/view configurations needed to for
the modules to work properly.
Sponsored by: The FreeBSD Foundation
Reviewed by: philip@ (mostly)
Approved by: philip@
case user wants to implement his own actions and doesn't want the attributes to
vanish.
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
MFC after: 3 days
and add protocol entries for protocols which have SCTP port allocations.
These entries are according to
http://www.iana.org/assignments/port-numbers
as of today. Also add SCTP port allocation entires for the
echo, daytime, and chargen service.
Discussed with rwatson@
MFC after: 3 days.
group on a object has less permissions that everyone). These
permissions will not work reliably over NFS if you have more than
14 supplemental groups and are usually not what you mean.
MFC after: 1 week
Hardware donated by: Rusty Nejdl rnejdl at ringofsaturn dot com
Tested by: Rusty Nejdl rnejdl at ringofsaturn dot com
Tested by: Andrzej Tobola ato at iem dot pw dot edu dot pl
MFC after: 3 weeks
set to use DHCP have no carrier. This can cause grief as it may take
some time for link to be established, and defaultroute may terminate
before this happens.
Introduce a defaultroute_carrier_delay variable and then wait that long
in defaultroute before bailing if no interfaces have carrier. With the
default settings defaultroute will wait for five seconds for this, and
the original 30 second wait for a default route to appear is unchanged.
Note that there is in discussion an alternative approach to the broader
problem of waiting for DHCP-configured routes. However, this change
addresses a real problem in the current defaultroute script.
Discussed on: freebsd-rc@
- looking for partition with 'bootonce' attribute alone (without 'bootme'
attribute), removing it and logging that we successfully booted from this
partition.
- looking for partitions with 'bootfailed' attribute, removing it and
logging that we failed to boot from this partition.
Reviewed by: arch (Message-ID: <20100917234542.GE1902@garage.freebsd.pl>)
Obtained from: Wheel Systems Sp. z o.o. http://www.wheelsystems.com
MFC after: 2 weeks
The $ip6addrctl_policy is a variable to choose a pre-defined address
selection policy set by ip6addrctl(8).
The keyword "ipv4_prefer" sets IPv4-preferred one described in Section 10.3,
the keyword "ipv6_prefer" sets IPv6-preferred one in Section 2.1 in RFC 3484,
respectively. When "AUTO" is specified, it attempts to read
/etc/ip6addrctl.conf first. If it is found, it reads and installs it as
a policy table. If not, either of the two pre-defined policy tables is
chosen automatically according to $ipv6_activate_all_interfaces.
When $ipv6_activate_all_interfaces=NO, interfaces which have no corresponding
$ifconfig_IF_ipv6 is marked as IFDISABLED for security reason.
The default values are ip6addrctl_policy=AUTO and
ipv6_activate_all_interfaces=NO.
Discussed with: ume and bz
unless it is the current timer. When we have resumed successfully, restore
the previous timecounter hardware if it was changed earlier. Only the ACPI
timer is guaranteed to increase monotonically between S-state changes.
changes to the package database, i.e. any packages that
have been added, updated or deleted in the past 24 hours.
The format is intentionally simple and concise.
That information is particularly useful on servers that
are maintained by multiple administrators. When someone
adds, updates or deletes a package, the others will see
it in the daily periodic output.
This script is disabled by default.
PR: conf/113913
Submitted by: olli
Approved by: des (mentor)
MFC after: 3 weeks
(in /etc/rc.conf).
This fixes an apparent confusion between test(1) and sh(1) syntax for
AND/OR.
PR: conf/149036
Submitted by: pluknet
MFC after: 1 week
This commit merges the latest LLVM sources from the vendor space. It
also updates the build glue to match the new sources. Clang's version
number is changed to match LLVM's, which means /usr/include/clang/2.0
has been renamed to /usr/include/clang/2.8.
Obtained from: projects/clangbsd
shell script is the back end logic necessary for an installer. It
contains both query routines to allow a front-end installer to present
reasonable choices to the user and also action routines which allow
the front end installer to put a FreeBSD distribution onto a disk. It
supports installing onto the usual suspects, as well as advanced
features like Mirroring, ZFS, Encryprion and GPT labels.
While this is only the back-end of the installer, it can do unattended
scripted installations. In PC-BSD's world view, all installations are
scripted and all the front-end does is write the script. As such, it
is useful in its own right.
This has been extensively tested over the past several releases of
PC-BSD. However, differences between that environment and FreeBSD
suggest there will be a period of shake-out while those differences
are discovered and corrected.
A text-based front-end is in the works. For the GUI-based front-end,
you can use the PC-BSD distribution.
Kris' BSDcan paper on pc-sysinstall is linked off his talk on the
BSDcan site:
http://www.bsdcan.org/2010/schedule/events/173.en.html
The man page is written by Josh Paetzel, and I wrote the Makefiles for
the FreeBSD integration. Kris wrote the rest.
This represents version r7010 in the PC-BSD repo.
http://svn.pcbsd.org/pcbsd/current/pc-sysinstall
Submitted by: kris@
Sponsored by: iX Systems
Features:
- configurable amount of days between scrubs (default value or per pool)
- do not scrub directly after pool creation (respects the configured
number of days between scrubs)
- do not scrub if a scrub is in progress
- tells how to see the status of the scrub
- tells how many days since the last scrub if it skips the scrubbing
- warns if a non-existent pool is specified explicitely
(default: no pools specified -> all currently imported pools are
handled)
- runs late in the periodic run to not slow down the other periodic daily
scripts
Discussed on: fs@
utilities and related support files for manual pages, which were previously
controlled by MAN. For POLA, the default depends on MAN, i.e., WITHOUT_MAN
implies WITHOUT_MAN_UTILS and WITH_MAN implies WITH_MAN_UTILS. This patch
is slightly improved by me from:
PR: misc/145212
FILESYSTEMS (the default early_late_divider):
1. Move sysctl to run first
2. Move as many BEFOREs to REQUIREs as possible.
3. Minor effect, move hostid_save from right before mdconfig to right
after.
A lot of the early scripts make use of sysctl one way or another so
running this first makes a lot of sense given that system-critical
values are often placed in sysctl.conf.
My original purpose for working on this was that while doing some
debugging on other stuff I noticed that the order of execution was
different in the first pass through the early scripts and the second.
In practice that doesn't matter because the scripts are not executed the
second time. However this _can_ result in problems if the difference in
the rcorder moves a script from the late section to the early section in
the second pass (which would mean the script would not get executed).
So, I wanted to make the order of execution of the scripts in the early
section more deterministic.
In the course of debugging the ordering problems I noticed that moving
the BEFOREs to REQUIREs prevented the changes in order from the first
pass to the second pass without having to make any substantial changes.
(Of course it's no secret that I think BEFORE should be avoided as much
as possible, but this is a good example of why.)
Reviewed by: silence on freebsd-rc@
MFC after: 8.1-RELEASE
wlan interfaces) from being automatically reloaded via devd shutdown
event handlers.
- Revert part of my previous changes to call ifn_stop on subinterfaces
when an interface is detached. It is better to destroy the interfaces
first so that an 'ifconfig foo0.blah down' doesn't result in ifconfig
auto-loading if_foo.ko. The ifconfig command will not be invoked if
foo0.blah is gone when ifn_stop() is called. Furthermore, it is not
necessary to explicitly invoke ifn_stop() after the subinterface is
destroyed as devd will already do that.
- Pass -n to ifconfig when destroying interfaces so that destroying a
cloned interface does not kldload any drivers.
Reviewed by: dougb
MFC after: 4 days
Starting something that wants input on login seems strange and can be
dangerous. In some configurations, causing output can be bad, but it is not
as dangerous.
I do not expect this msgs invocation to be uncommented often.
PR: conf/96015
MFC after: 4 days
named_chrootdir IS set, named-checkconf fails because it
cannot find the conf file. Fix this by making checkconf a
variable that includes "-t $named_chrootdir" as needed.
Notice of the bug and suggested direction for the fix from [1].
Using required_files for named.conf is overkill ever since
I added the named-checkconf call, so rather than update the
logic to handle the case described above, remove it. This
also handles the case where named_chroot_autoupdate IS set
but the symlink doesn't exist yet.
PR: conf/145904
Submitted by: J R Matthews
proper device_t so it faked the devctl event to appear like one, this is now a
notify which allows more information to be passed.
We notify for both the device attach/detach and for each usb interface. A devd
rule can now match on the interface properties, including composite devices
which may have a uvideo interface and also usound and possibly uhid too.
An example to match a umass device with a scsi subclass and BBB protocol would be
notify 100 {
match "system" "USB";
match "subsystem" "INTERFACE";
match "type" "ATTACH";
match "intclass" "0x08";
match "intsubclass" "0x06";
match "intprotocol" "0x50";
action ...
};
The old attach devctl event has been retained for the moment to make merging to
8.1 easier. This was never compatible with 7.x or earlier due to the ugen regex
change needed.
Reviewed by: warner
MFC after: 1 week
and ipv6_ifconfig_<interface> options have already been deprecated,
these changes do not alter that.
With these changes any value set for ipv6_enable will emit a
warning. In order to avoid a POLA violation for the deprecation
of the option ipv6_enable=NO will still disable configuration
for all interfaces other than lo0. ipv6_enable=YES will not have
any effect, but will emit an additional warning. Support and
warnings for this option will be removed in FreeBSD 10.x.
Consistent with the current code, in order for IPv6 to be configured
on an interface (other than lo0) an ifconfig_<interface>_ipv6
option will have to be added to /etc/rc.conf[.local].
1. Clean up and minor optimizations for the following functions:
ifconfig_up (the ipv6 elements)
ipv6if
ipv6_autoconfif
get_if_var
_ifconfig_getargs
The cleanups generally were to move the "easy" tests earlier in the
functions, and consolidate duplicate code.
2. Stop overloading ipv6_prefer with the ability to disable IPv6
configuration.
3. Remove noafif() which was only ever called from ipv6_autoconfif.
Instead, simplify and integrate the tests into that function, and
convert the test to use is_wired_interface() instead of listing
wireless interfaces explicitly.
4. Integrate backwards compatibility for ipv6_ifconfig_<interface>
into _ifconfig_getargs. This dramatically simplifies the code in
all of the callers, and avoids a lot of other code duplication.
5. In rc.d/netoptions, add code for an ipv6_privacy option to use
RFC 4193 style pseudo-random addresses (this is what windows does
by default, FYI).
6. Add support for the [NO]RTADV options in ifconfig_getargs() and
ipv6_autoconfif(). In the latter, include support for the explicit
addition of [-]accept_rtadv in ifconfig_<interface>_ipv6 as is done
in the current code.
7. In rc.d/netif add a warning if $ipv6_enable is set, and remove
the set_rcvar_obsolete for it. Also remove the latter from
rc.d/ip6addrctl.
8. In /etc/defaults/rc.conf:
Add an example for RTADV configuration.
Set ipv6_network_interfaces to AUTO.
Switch ipv6_prefer to YES. If ipv6_enable is not set this will have
no effect.
Add a default for ipv6_privacy (NO).
9. Document all of this in rc.conf.5.
still exists as a zombie. The 'kill -0' test in this function can
therefore return true even if the process isn't actually running.
This could lead to wait_for_pids() printing an endless string of the
pid number until the zombie finally exits.
Solve this problem by moving the sleep up to after the 'kill -0' test, but
only after we've run through the function once already. In the common case
(only one pid in the list) this will always do the right thing. On the rare
occasion that there is more than one pid in the list this will sleep 1
second per zombie process which will allow that process, and any other
in the list a chance to exit.
While I'm here, local'ize the variables that this function uses.
Just comment out the atrun line instead of completely removing it. It is
not a bad idea to leave it as a reference in case someone decides to
install atrun by hand afterwards.
- Remove dosansi, pc and pc3. I suspect nobody ever needs these.
- Add vt100, screen and xterm-color.
This file is now probably more than sufficient in most cases, even for
common use outside single user mode, where people just use the console
driver, a graphical terminal emulator and a terminal multiplexer.
Right now we have a termcap.small in the tree, but we don't install it.
If we do install this file by default, it is more likely for
applications to work in single user mode.
I am not entirely happy with the contents of this file. In my opinion we
should remove the `dosansi', `pc' and `pc3' entries and replace them
with `vt100' in case someone uses a serial console.
The file does already have entries for `cons25' and `xterm', which is
used most often.
Requested by: brucec
At least in RELENG_7 this fixes some start problems for some programs
from the ports. It is also more correct, as a jail shall not expect
input (interactivity) from the jail-host.
Revert the current behavior of starting jails in the background and
make it optional only for the start of jails (jail_parallell_start=YES
in rc.conf):
- The stop can not be done in the background, the system needs to wait
until everything is stopped correctly before it can reboot or power
down.
- The start should not be done in parallel by default, this not only
breaks POLA for people comming from RELENG_x, it may also break a
dependency chain with other scripts in the jail-host, which need to
do some stuff after the jails are up and running (e.g. hardlinking
a mysql socket from one jail into another one).
Discussed on: freebsd-jails@
HAST allows to transparently store data on two physically separated machines
connected over the TCP/IP network. HAST works in Primary-Secondary
(Master-Backup, Master-Slave) configuration, which means that only one of the
cluster nodes can be active at any given time. Only Primary node is able to
handle I/O requests to HAST-managed devices. Currently HAST is limited to two
cluster nodes in total.
HAST operates on block level - it provides disk-like devices in /dev/hast/
directory for use by file systems and/or applications. Working on block level
makes it transparent for file systems and applications. There in no difference
between using HAST-provided device and raw disk, partition, etc. All of them
are just regular GEOM providers in FreeBSD.
For more information please consult hastd(8), hastctl(8) and hast.conf(5)
manual pages, as well as http://wiki.FreeBSD.org/HAST.
Sponsored by: FreeBSD Foundation
Sponsored by: OMCnet Internet Service GmbH
Sponsored by: TransIP BV
specify list of executables and/or rc scripts that should be executed
after firewall starts/stops.
Submitted by: Yuri Kurenkov <y dot kurenkov at init dot ru>
Reviewed by: rhodes, rc@
MFC after: 1 week
The rtsol(8) handles just one RA then exit. So, the OtherConfig flag
may not be handled well by rtsol(8) in the environment where there are
multiple RA servers on the segment. In such case, rtsold(8) will be
your friend.
Reviewed by: hrs
MFC after: 2 weeks
When we had utmp(5), we had to list all the psuedo-terminals in ttys(5)
to make ttyslot(3) function properly. Now that pututxline(3) deals with
slot allocation internally (not based on TTY names), we don't need to
list all the TTYs on the system in ttys(5) to make user accounting work
properly.
This patch removes all the entries from the /etc/ttys files, but also
the pts(4) entries that were appended implicitly, which was added in
r154838.
assigned official port number 4369 by IANA.
PR: conf/113265
Submitted by: Jimmy Olgeni <olgeni@freebsd.org>
Obtained from: http://www.iana.org/assignments/port-numbers
MFC after: 2 days
released IPv4 documentation ranges (http://tools.ietf.org/html/rfc5737)
and catch up to the IPv6 documentation range and domain names that 5737
also references.
Note that due to e.g. write throttling ('wdrain'), it can stall all the disk
I/O instead of just the device it's configured for. Using it for removable
media is therefore not a good idea.
Reviewed by: pjd (earlier version)
I've been so busy hacking on utmpx the last couple of days, out of
reflex, I committed it to the wrong source tree. Note to myself: don't
hack on FreeBSD while watching TV at the same time.
PR: conf/142578
Submitted by: Yuri Pankov <yuri pankov gmail com>
Reminded by: stefanf
Don't complain when we encounter the "cache" source, it's valid. Also fix
the error message to include a line feed and not include a stray comma.
PR: bin/121671
Submitted by: Artis Caune artis.caune gmail.com
Approved by: ed (mentor)
MFC after: 2 weeks
While here, change "> /dev/stderr" for more usual ">&2"
Submitted by: jilles
would be "/etc/namedb" in a number of places. Since the user may make
a different choice, introduce a new internal variable, named_confdir
that is generated relative to the location of $named_conf.
While this will work for some things (especially a highly customized
build from ISC source) there are still a number of places where
/etc/namedb is assumed that it is not easily virtualized (E.g., mtree).
If you deviate from the defaults you'd better know what you're doing. :)
wlan(4) interfaces. vlan(4) interfaces are listed via a new 'vlans_<IF>'
variable. If a vlan interface is a number, then that number is treated as
the vlan tag for the interface and the interface will be named '<IF>.<tag>'.
Otherwise, the vlan tag must be provided via a vlan parameter in a
'create_args_<vlan>' variable.
While I'm here, fix a few nits in rc.conf(5) and mention create_args_<IF> in
the description of cloned_interfaces.
Reviewed by: brooks
MFC after: 2 weeks
This waits for the requested process(es) to terminate, rather than polling
with an interval of 2 seconds.
If pwait is not available, the old method is used.
PR: conf/132766
Reviewed by: dougb
write to. This is specified in "options { directory }" in named.conf.
So, create /etc/namedb/working with appropriate permissions, and
update the entry in named.conf to match.
In addition to specifying the working directory, file and path names
in named.conf can be specified relative to the directory listed.
However, since that directory is now different from /etc/namedb
(where the configuration, zone, rndc.*, and other files are located)
further update named.conf to specify all file names with fully
qualified paths. Also update the comment about file and path names
so users know this should be done for all file/path names in the file.
This change will eliminate the 'working directory is not writable'
messages at boot time without sacrificing security. It will also
allow for features in newer versions of BIND (9.7+) to work as
designed.
exiting a pager, vi, etc.
Add some example xterm*-clear entries to the termcap files to make
it easier for people to enable that behavior.
Document the examples in the man page to make them easier to find.
command in the rc.d script if we have a corresponding ${name}_program
entry, which we do for named.
Rename named_precmd to named_prestart to make it more clear and match
convention.
Move the command_args definition related to -u up into _prestart().
It (and the associated $named_uid value) are only used there, and
unlike required_* and pidfile don't need to be used until this stage.
Fix a silly bug that would only have affected people who were using
the new named_wait or named_auto_forward features, AND had set up an
rndc.conf file instead of using the automatically generated rndc.key.
For named_conf:
Add "-c $named_conf" to command_args if it's not set to the
default. If it is set to the default and we're using the base
BIND it's not necessary. If we're using BIND from the ports
the user is likely to have included it in _flags (due to long
necessity for doing so) so don't duplicate that if it's set.
Add $named_conf to required_files
It turns out these entries do make Terminal.app behave a little better.
According to Thomas Dickey, Terminal.app should use TERM=nsterm anyway,
but we don't support this yet. Already having an improved termcap entry
helps, so I am going to MFC this change after all.
Suggested by: Leonidas Tsampros <ltsampros upnet gr>
MFC after: 1 month
protocol flaw. [09:15]
Correctly handle failures from unsetenv resulting from a corrupt
environment in rtld-elf. [09:16]
Fix permissions in freebsd-update in order to prevent leakage of
sensitive files. [09:17]
Approved by: so (cperciva)
Security: FreeBSD-SA-09:15.ssl
Security: FreeBSD-SA-09:16.rtld
Security: FreeBSD-SA-09:17.freebsd-udpate
Right now syscons(4) uses a cons25-style terminal emulator. The
disadvantages of that are:
- Little compatibility with embedded devices with serial interfaces.
- Bad bandwidth efficiency, mainly because of the lack of scrolling
regions.
- A very hard transition path to support for modern character sets like
UTF-8.
Our terminal emulation library, libteken, has been supporting
xterm-style terminal emulation for months, so flip the switch and make
everyone use an xterm-style console driver.
I still have to enable this on i386. Right now pc98 and i386 share the
same /etc/ttys file. I'm not going to switch pc98, because it uses its
own Kanji-capable cons25 emulator.
IMPORTANT: What to do if things go wrong (i.e. graphical artifacts):
- Run the application inside script(1), try to reduce the problem and
send me the log file.
- In the mean time, you can run `vidcontrol -T cons25' and `export
TERM=cons25' so you can run applications the same way you did before.
You can also build your kernel with `options TEKEN_CONS25' to make all
virtual terminals use the cons25 emulator by default.
Discussed on: current@
This will prevent that the script hangs during startup, which
could cause annoying effects after rebooting for example.
PR: kern/139422
Submitted by: Andrey Groshev <greenx at yartv dot ru>
Approved by: imp (mentor, implicit)
MFC after: 3 days
Facilitated by: Snow B.V.
By misinterpreting some data, I thought that getty wouldn't apply any
baud rate to the syscons devices, but it uses the default entry instead.
This means that the baud rate is set to 1200. This isn't too bad, except
when using canonical mode. Make it use 9600 baud by default.
MFC after: 1 week
Devices that don't implement param() (which means they don't support
hardware parameters such as flow control, baud rate) hardcode the baud
rate to TTYDEF_SPEED. This means the buffer size cannot be configured,
which is a little inconvenient when using canonical mode with big lines
of input, etc.
Make it adjustable, but do clamp it between B50 and B115200 to prevent
awkward buffer sizes. Remove the baud rate assignment from
/etc/gettytab. Trust the kernel to fill in a proper value.
Reported by: Mikolaj Golub <to my trociny gmail com>
MFC after: 1 month
employ a more generic solution, and use it in the individual rc.d scripts
that also have an $rc_quiet test:
1. Add check_startmsgs() to rc.subr.
2. In the rc.d scripts that use rc_quiet (and rc.subr) substitute
variations of [ -z "$rc_quiet" ] with check_startmsgs
3. In savecore add a trailing '.' to the end of the message to make it
more consistent with other scripts.
4. In newsyslog remove a : before the terminal '.' since we do not expect
there to be anything printed out in between to make it more consistent.
5. In the following scripts change "quotes" to 'quotes' where no variables
exist in the message: savecore pf newsyslog
6. In the following scripts substitute if/then/fi for the simpler (and
more consistent) check_startmsgs &&: faith stf
7. In the following scripts separate the "Starting foo:" from the terminal
'.' to make them more consistent: moused hostname pf
8. In nfsclient move the message to its own line to avoid a style bug
9. In pf rc_quiet does not apply to the _stop method, so remove the
test there.
10. In motd add 'quotes' around the terminal '.' for consistency
for each address family. Replace AF_static() with static_AF() for
consistency.
- Display a message only if the user sets a non-default value, and set
a sysctl explicitly even if it is the default value.
- Split netoptions_start() to netoptions_AF() and add afexists() check
for each address family.
- Display a message only if the user sets a non-default value, and set
a sysctl explicitly even if it is the default value.
Spotted by: Pegasus Mc Cleaft[*]
an IPv6 support.
Reported by: Alexander Best <alexbestms__at__math.uni-muenster.de>
Confirmed by: Paul B. Mahol <onemda__at__gmail.com>,
Alexander Best <alexbestms__at__math.uni-muenster.de>
fstab: /etc/fstab:0: No such file or directory
and from dump(8) when setfsent(3) fails due to /etc/fstab not existing:
DUMP: Can't open /etc/fstab for dump table information: No such...
This makes daily and security periodic runs somewhat cleaner in jails
which lack /etc/fstab files.
MFC after: 1 month
re-add $ipv6_enable support for backward compatibility. From
UPDATING:
1. To use IPv6, simply define $ifconfig_IF_ipv6 like $ifconfig_IF
for IPv4. For aliases, $ifconfig_IF_aliasN should be used.
Note that both variables need the "inet6" keyword at the head.
Do not set $ipv6_network_interfaces manually if you do not
understand what you are doing. It is not needed in most cases.
$ipv6_ifconfig_IF and $ipv6_ifconfig_IF_aliasN still work, but
they are obsolete.
2. $ipv6_enable is obsolete. Use $ipv6_prefer and/or
"inet6 accept_rtadv" keyword in ifconfig(8) instead.
If you define $ipv6_enable=YES, it means $ipv6_prefer=YES and
all configured interfaces have "inet6 accept_rtadv" in the
$ifconfig_IF_ipv6. These are for backward compatibility.
3. A new variable $ipv6_prefer has been added. If NO, IPv6
functionality of interfaces with no corresponding
$ifconfig_IF_ipv6 is disabled by using "inet6 ifdisabled" flag,
and the default address selection policy of ip6addrctl(8)
is the IPv4-preferred one (see rc.d/ip6addrctl for more details).
Note that if you want to configure IPv6 functionality on the
disabled interfaces after boot, first you need to clear the flag by
using ifconfig(8) like:
ifconfig em0 inet6 -ifdisabled
If YES, the default address selection policy is set as
IPv6-preferred.
The default value of $ipv6_prefer is NO.
4. If your system need to receive Router Advertisement messages,
define "inet6 accept_rtadv" in $ifconfig_IF_ipv6. The rc(8)
scripts automatically invoke rtsol(8) when the interface becomes
UP. The Router Advertisement messages are used for SLAAC
(State-Less Address AutoConfiguration).
legacy IP handling rather than the IPv6 version.
Reported by: Pegasus Mc Cleaft (ken mthelicon.com)
Tested by: Pegasus Mc Cleaft (ken mthelicon.com)
MFC after: 2 days
X-MFX with: r197139
network_ipv6->rc.d/netif integration:
- $ipv6_enable is now obsolete. Instead, IPv6 is enabled by
default if the kernel supports it, and $ipv6_network_interfaces
is "none" by default. If you want to use IPv6, define
$ipv6_network_interfaces and $ifconfig_xxx_ipv6.
An interface which is in $network_interfaces and not in
$ipv6_network_interfaces will be marked as "inet6
-auto_linklocal ifdisabled" (see ifconfig(8)).
- $ipv6_ifconfig_xxx is renamed to ifconfig_xxx_ipv6 for
consistency with other address families. The old variables
still work but can be removed in the future. Note that
ipv6_ifconfig_xxx="..." should be replaced with
ifconfig_xxx_ipv6="inet6 ...".
- Receiving ICMPv6 Router Advertisement is not automatically
enabled even if there is no manual configuration of IPv6 in
rc.conf. If you want it, define
ifconfig_xxx_ipv6="inet6 ... accept_rtadv".
- The rc.d/ip6addrctl now chooses address selection policy based
on $ipv6_prefer, not $ipv6_enable. The default is
ipv6_prefer=NO.
- $router* and $ipv6_router* are replaced with $routed_* and
$route6d_* for consistency. The old variables still work but
can be removed in the future.
MFC after: 3 days
and $desc.
The set_rcvar_obsolete() is for displaying an obsolete variable
and the new one. More specifically, a warning is displayed when
a variable is removed or changed in the source tree and the user
still defines the old one.
$router* and $ipv6_router* are replaced with $routed_* and
$route6d_* for consistency. The old variables still work but
can be removed in the future.
MFC after: 3 days
- Add rc.d/stf and rc.d/faith for stf(4) and faith(4).
- Remove rc.d/auto_linklocal and rc.d/network_ipv6.
- Move rc.d/sysctl to just before FILESYSTEMS because rc.d/netif
depends on some sysctl variables.
Reviewed by: brooks
MFC after: 3 days
it from the build.
If you are using the FTP daemon, please consider using the port ftp/tnftpd
which is the same FTP server, but newer and might have more/better
functionality.
This results in us providing only one ftp daemon by default.
Reviewed by: bz
Approved by: imp (mentor, implicit)
MFC after: 3 days
Silence from: obrien
rtsol_interface gets reset to "yes" each time through the loop, but
rtsol_available does not. If a user has lo0 first in their list of
interfaces rtsol_available will get set to "no" the first time through
the loop and subsequent interfaces will not get rtsol'ed when they should.
Therefore change the conditional for the is_wired() test to _interface.
Noticed by: Dimitry Andric <dimitry@andric.com>
statically bind IPv4 <-> MAC address at boot time.
In order to use this, the administrator needs to configure the following
rc.conf(5) variable:
- static_arp_pairs: A list of names for static bind pairs, and,
- a series of static_arp_(name): the arguments that is being passed to
``arp -S'' operation.
Example:
static_arp_pairs="gw"
static_arp_gw="192.168.1.1 00:01:02:03:04:05"
See the rc.conf(5) manual page for more details.
Reviewed by: -rc@
MFC after: 2 weeks
AUTO the biggest mistake users made was leaving lo0 off the list. Since
lo0 is effectively mandatory, check for it and add it to the list if
it's not there.
simplify it a bit, and make use of that method to determine if an
interface is a candidate for IPv6 rtsol rather than listing all of the
possible wireless interfaces that should _not_ get rtsol'ed.
This change is only relevant for 8.0+ unless the "wlan mandatory" code
gets ported back to RELENG_7.
using freebsd-update. This applies to using freebsd-update in "upgrade
mode" and normal freebsd-update on a security branch.
The backup kernel will be written to /boot/kernel.old, if the directory
does not exist, or the directory was created by freebsd-update in a
previous backup. Otherwise freebsd-update will generate a new directory
name for use by the backup. By default symbol files are not backed up
to save diskspace and avoid filling up the root partition.
This feature is fully configurable in the freebsd-update config file,
but defaults to enabled.
MFC after: 1 week (stable/7)
Reviewed by: cperciva
Approved by: re (kib)
controllers. Controller, array, and drive status can be checked, basic
attributes can be changed, and arrays and spares can be created and deleted.
Controller firmware can also be flashed.
This does not replace MegaCLI, found in ports, as that is officially sanctioned
and supported by LSI and includes vastly more functionality. However, mfiutil
is open source and guaranteed to provide basic functionality, which can be
especially useful if you have a problem and can't get MegaCLI to work.
Approved by: re
Obtained from: Yahoo! Inc.
top of ZVOLs. The problem is that rc.d/fsck runs before rc.d/zfs. The
latter makes ZVOLs to appear in /dev/. In such case rc.d/fsck cannot
find devfs entry and aborts. We cannot simply move rc.d/zfs before
rc.d/fsck, because we first want kern.hostid to be configured (by
rc.d/hostid). If we won't wait (hostid will be 0) we can reuse disks
which are in use by different systems (eg. in SAN/NAS environment).
We also cannot move rc.d/hostid before rc.d/fsck, because rc.d/hostid on
first system start stores generated kern.hostuuid in /etc/hostid file,
so it needs root file system to be mounted read-write.
The fix is to split rc.d/hostid so that rc.d/hostid (which will now run
before rc.d/fsck) only generates hostid and sets up sysctls, but doesn't
touch root file system and rc.d/hostid_save (which is run after
rc.d/root) and only creates /etc/hostid file.
With that in place, we can move ZVOL initialization to dedicated
rc.d/zvol script which runs before rc.d/fsck.
PR: conf/120194
Reported by: James Snow <snow@teardrop.org>
Reviewed by: brooks
Approved by: re (kib)
MFC after: 2 weeks
The Portsnap buildbox now generates teh bits needed for portsnap to produce
INDEX-8; and it hasn't built INDEX-5 for a long time, although the bits are
still distributed for an INDEX-5 from when FreeBSD 5.x reached its EoL.
Approved by: re (kib)
MFC after: 3 days (INDEX-8 addition only)
2) Point people at the pool website and encourage
people to provide a server in the pool (as a
courtesy to the pool guys).
3) Fix a spelling.
4) Comment out the local clock and include a link
to documentation for use of the local clock on
the ntp.org site.
Approved by: re (kib)
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
allow them to start after netif. There were too many problems reported
with this change in the short period of time that it lived in HEAD, and
we are too late in the release cycle to properly shake it out.
IMO the issue of having the firewalls up before the network is still a
valid concern, particularly for pf whose default state is wide open.
However properly solving this issue is going to take some investment
on the part of the people who actually use those tools.
This is not a strict reversion of all the changes for r193198 since it
also included some simplification of the BEFORE/REQUIRE logic which is
still valid for ipfilter and ip6fw.
- update for getrlimit(2) manpage;
- support for setting RLIMIT_SWAP in login class;
- addition to the limits(1) and sh and csh limit-setting builtins;
- tuning(7) documentation on the sysctls controlling overcommit.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
vt220 will not work better. Even though it probably will remove warnings
about unknown terminal types, a cons25 emulator is not compatible with
vt220 at all.
There is a minor typo in the cons25l7 (':' instead of '|') entry
in src/etc/termcap.small that causes syscons to complain about
bogus characters in /etc/termcap.db.
PR: conf/132777
Submitted by: Nikos Ntarmos <ntarmos@cs.uoi.gr>
MFC after: 1 week
This allows to append custom rules at the end of the file without
risk of confusion that can result when one misses default !ppp line
and doesn't add another program specification and thus subsequent
selector(s) would belong to ppp program block.
Requested by: marck
Submitted by: marck
Approved by: jhb (mentor)
- Remove redundant debugging of consolelog.
- Use `while :', instead of `while [ true ]'. This is done in other
places as well.
Submitted by: Jille Timmermans <jille quis cx> (not jilles)
Reviewed by: jilles
Catalan language is not only spoken in Spain (ca_ES), but also
in Andorra, France and Italy. In Andorra it is the official
language.
(see http://en.wikipedia.org/wiki/Catalan_language#Geographic_distribution)
Add a bunch of symlinks to between ca_ES and ca_AD, ca_FR and ca_IT.
PR: conf/92541
Submitted by: <rmh@io.debian.net>
MFC after: 1 week
This NTP configuration file points to the [012].pool.ntp.org servers,
which will return a list of geographical local NTP servers.
It uses the best-practice options of "iburst" and "maxpoll 9".
It gives examples on how to use the "restrict" commands, which are
unfortunately not working when you use the pool.ntp.org servers.
It sets up a fudge server so any clients syncing against this server
will always be synced even if we lose the master.
The idea of this file was briefly discussed on -net.
PR: conf/58595
Submitted by: Chris Stenton <jacs@gnome.co.uk>
MFC after: 1 week
/etc/rc.d. They use the following new rc variables:
nfsv4_server_enable - set to "YES" to run the experimental server
nfsuserd_enable - set to "YES" to run nfsuserd for NFSv4 client and
server
nfsuserd_flags - command line flags for nfsuserd
nfscbd_enable - set to "YES" to run the experimental nfs client's
NFSv4 callback daemon
nfscbd_flags - command line flags for nfscbd
Reviewed by: dougb
Approved by: kib (mentor)
and -delete (which implies depth-first traversal), avoid using -delete in
favour of -execdir.
This has a side-effect of not removing directories that contain files,
even if we delete all of those files, but IMHO that's a better option
than specifying all possible local filesystem types in this script.
PR: 122811
MFC after: 3 weeks
AUTO are deprecated.' There is no good reason to deprecate them, and
setting this to different values can be useful for custom solutions
and/or one-off configuration problems.
happen right after ypbind, and before anything that uses NIS. The only
change in rcorder accomplished by this patch is make that happen.
PR: conf/117555
Submitted by: John Marshall <john@rwsrv05.mby.riverwillow.net.au>
differently. The output now shows the ruleset and shortens to
slightly different text (using $daily_status_mail_rejects_shorten),
but it should be more descriptive.
PR: 35018
Inspired by: Mikhail Teterin - mi at aldan dot algebra dot com
MFC after: 3 weeks
so that the .h files in src/sys/fs/nfs will be installed under
/usr/include/fs/nfs. This will allow the following utilities to
build, once additions and changes for the experimental nfs subsystem
are committed:
usr.sbin/mountd - Once modified to add support for the
experimental nfs subsystem.
ur.sbin/nfsstat - Once modified to add support for the
experimental nfs subsystem.
usr.sbin/nfscbd - The client side callback daemon for NFSv4.
usr.sbin/nfsuserd - The NFSv4 user/group name<->uid/gid mapping daemon.
usr.sbin/nfsdumpstate - The NFSv4 utility for dumping open/lock state.
usr.sbin/nfsrevoke - The sysadmin command for revoking NFSv4 state.
Approved by: kib (mentor)
(localhost by default) can be successfully looked up. Off by default.
2. New feature: option to create a forwarder configuration file based on
the contents of /etc/resolv.conf. This allows you to utilize a local
resolver for better performance, less network traffic, custom zones, etc.
while still relying on the benefits of your local network resolver.
Off by default.
3. Add named-checkconf into the startup routine. This will prevent named
from trying to start in a situation where it would not be possible to do
so.
During bootup, if /etc/rc.d/savecore detects a core dump file
on the dump device, the core file will be saved, and the crashinfo
script will be run to generate a human-readable report.
This will make it easier for end-users to provide feedback to
developers about kernel crashes.
Reviewed by: jhb
arbitrary commands (outside the jail) associated with said events,
e.g. to bring up/down CARP interfaces representing services run in
jails.
Reviewed by: simon
is set and "natd_enable" is NOT set;
- Accept and pass firewall type to the external firewall script.
Submitted by: Yuri Kurenkov < y -dot- kurenkov -at- init -dot- ru >
MFC after: 3 days
No response from: freebsd-rc
sendmail / postfix etc. may fail to start because DNS is unavailable and /
or the server is unreachable. In the worst case, the machine may become
unusable.
Debugging this issue was far more difficult than it should have been, due
to earlier changes to the rc framework to hide almost all useful information
about the boot process.
Approved by: silence
Even though I increased the amount of pts(4) entries in /etc/ttys some
time ago, I didn't realize back then those entries shouldn't have been
there in the first place.
I just looked at the getttyent() source code and it turns out when you
call setttyent(), it walks through /dev/pts and looks for the device
with the highest number. After you receive EOF's from getttyent(), it
makes up entries for pts(4) devices.
This means that adding entries for pts(4) is somewhat harmful, because
if you now traverse the list, you get redundant entries, so just remove
them.
the jail case specifically. In case we find a proper pre-seeded
devfs in the chroot path (mounted from the base system) permit
starting chrooted else give proper warn/error messages.
PR: conf/103489
Reviewed by: dougb
MFC after: 5 days
time to boot an unplugged system 30 sec. longer for no good reason. Therefore,
add a check to make sure that any DHCP interfaces are plugged in before
waiting.
o no need for special country codes; it's sufficient to use the sku
o no need to specify bands w/ 2.4G frequencies, use the real values
o remove duplicate band specs
the -g and -q options. They do a slightly different thing and
both are necessary when the time difference is large.
Noticed by: danger, in the forums
Approved by: roberto
MFC after: 1 week
Note: this is only really necessary because of the ifconfig
logic to add/remove the jail IPs upon start/stop.
Consensus among simon and I is that the logic should
really be factored out from the startup script and put
into a proper management solution.
- We now support starting of no-IP jails.
- Remove the global jail_<jname>_netmask option as it is only
helpful to set netmasks/prefixes for the right address
family and per address.
- Implement jail_<jname>_ip options to support both
address familes with regard to ifconfig logic.
- Implement _multi<n> support suffix to the jail_<jname>_ip
option to configure additional addresses to avoid overlong,
unreadbale jail_<jname>_ip lines with lots of addresses.
Submitted by: initial work from Ruben van Staveren
Discussed on: freebsd-jail in Nov 2008.
Reviewed by: simon, ru (partial, older version)
MFC after: 1 week
rcshutdown_timeout (normally 30s) around re-parented to init, make
sure both go away using pkill -P.
While noone normally notices this for the system shutdown, it helps for
cleanly shutting down trusted jails.
Found without a killall in the base system, which in rc.d/jail normally
ensures that all processes of a jail to be stopped will be killed.
Reviewed by: silence on current@
MFC after: 4 weeks
the suggested ruleset[1].
While here use an IP from the 'test-net' prefix for docs.
PR: kern/130102 ([1] different problem in the end)
Reviewed by: simon
MFC after: 2 weeks
easier to maintain custom rules for non-system things like ACPI hotkeys.
/etc/devd.conf is already set up to check this directory, no change needed there.
newline when it fails to obtain an address via DHCP. This made the next
rc script begin its output on the same line.
PR: conf
Submitted by: Bruce Cran <bruce at cran dot org dot uk>
MFC after: 3 days
it does come back it would probably be better if users who were interested
in slip added appropriate lines instead of this being here unconditionally.
Reminded by: tut <at> nhamon <dot> com <dot> ua
does ever come back it's probably best if its log file be something that
gets added if the user decided they want to run slip instead of having
it here unconditionally.
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h
These files are not used any more.
src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist
Make "usbconfig" and "libusb20" a part of the default build.
src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c
Use common include file.
src/sys/dev/usb2/bluetooth/ng_ubt2.c
Make USB bluetooth depend on "ng_hci" module.
src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h
Patches for Marvell EHCI.
src/sys/dev/usb2/core/usb2_busdma.c
Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.
src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h
Bugfix for libusb filesystem interface.
New feature: Add support for filtering device data at the expense of the
userland process.
Add some more comments.
Some minor code styling.
Remove unused function, usb2_fifo_get_data_next().
Fix an issue about "fifo_index" being used instead of "ep_index".
src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c
Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.
Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.
src/sys/dev/usb2/core/usb2_hub.c
Improvement: Check all USB HUB ports by default at least one time.
src/sys/dev/usb2/core/usb2_request.c
Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.
Improvement: Skip invalid characters instead of replacing with a dot.
src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c
Spelling.
src/sys/dev/usb2/include/Makefile
Share "usbdevs" with the old USB stack.
src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h
Regenerate files.
Alfred: Please fix the RCS tag at the top.
src/sys/dev/usb2/include/usb2_ioctl.h
Fix compilation of "kdump".
src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c
Remove device ID's which will end up in a new 3G driver.
src/sys/dev/usb2/sound/uaudio2.c
Correct a debug printout.
src/sys/dev/usb2/storage/umass2.c
Sync with old USB stack.
src/lib/libusb20/libusb20.3
Add more documentation.
src/lib/libusb20/libusb20.c
Various bugfixes and improvements.
src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c
New commands for dumping strings and doing custom USB requests from
the command line.
Remove keyword requirements from generated files:
"head/sys/dev/usb2/include/usb2_devid.h"
"head/sys/dev/usb2/include/usb2_devtable.h"
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
but there won't be one so root won't be able to login; edit the installed
file to use /bin/sh in this case.
o while here split csh-related files apart from sh and only install them
when requested
I noticed on a system at home that restarting named(8) causes the
/var/named/dev mount to be moved to the bottom of the mount list,
because it gets remounted. When I received the daily security email this
morning, I was quite amazed to see that the security report listed the
differences, while it was nothing out of the ordinary.
If we just throw the `mount -p' output through sort(1), we'll only
receive notifications about changes to mounts if something has really
changed.
control over the result of buildworld and installworld; this especially
helps packaging systems such as nanobsd
Reviewed by: various (posted to arch)
MFC after: 1 month
This allows the location of the configuration data to be relocated
within the filesystem containing it. A nullfs mount is used in order
to achieve this.
Obtained from: XORP, Inc.
As discussed with Robert Watson on the src-committers list, it is safer
to keep at least some pty(4) entries in /etc/ttys, for applications that
roll their own PTY allocation routine and only search for BSD-style
PTY's.
This means we've now just toggled the amount of entries for pts(4) and
pty(4).
Requested by: rwatson
Because we now use pts(4)-style PTY's exclusively, there is no use for
these entries in /etc/ttys. Right now the pts(4) entries only go from 0
to 255. Because we're going to touch these files anyway, increase the
number to 511.
Discussed with: philip (ex-mentor)
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
