Commit Graph

185902 Commits

Author SHA1 Message Date
Craig Rodrigues
edc144a12b Also mention that drill(1) can be used, now that nslookup and dig are no
longer in the base system.

Suggested by: peter
2013-11-29 08:22:48 +00:00
Craig Rodrigues
a3845534a0 In keg_dtor(), print out the keg name in the "Freed UMA keg was not empty"
message printed to the console.  This makes it easier to track down
the source of certain memory leaks.

Suggested by: adrian
2013-11-29 08:04:45 +00:00
Rui Paulo
1a707877c1 Fix typo in comment. 2013-11-29 07:55:44 +00:00
Rui Paulo
30ff7b3820 Move KDTRACE_FRAME to "options" since it's used by kern.pre.mk. 2013-11-29 07:28:59 +00:00
Kevin Lo
5b7514646c Change run_rt2870_rf_write() prototype (no functional change) 2013-11-29 07:08:17 +00:00
Kevin Lo
5f7e329cec On the RT2870, rf registers are now 64-bit, not 32-bit after r257955.
Committed over a Buffalo WLI-UC-AG300N (RT2870).
2013-11-29 06:10:44 +00:00
Pedro F. Giffuni
9a252f0990 gcc: Make use of TREE_OVERFLOW_P.
While it was brought in r258179 only to fix a build issue,
bringing the rest of the change has the advantage of fixing
GCC/19978.

Obtained from:	gcc 4.3 (rev. 120505; GPLv2)
MFC after:	1 week
2013-11-29 05:00:07 +00:00
Devin Teske
41166e501a Fix an issue where additional lines of a function definition didn't line
up with the primary (leading) line of syntax.
2013-11-29 04:09:25 +00:00
Devin Teske
1c707e42a9 Fix an issue where the leading `+' sign before a function name was not
displayed unless color was requested.
2013-11-29 04:08:21 +00:00
Rui Paulo
19107ce5e7 Add an interface for the Wii IOS kernels.
Multiple IOS interfaces can exist at the same time.
2013-11-29 00:40:32 +00:00
Andreas Tobler
a07c08cea5 Give some output about the CPU clock on IBMPOWER machines, currently read
from OF. Linux does it similar, means they also read the OF values and
display them.

Tested under qemu and real hardware:

	cpu0: IBM POWER5+ revision 2.0, 1898.10 MHz
2013-11-28 21:57:17 +00:00
Andriy Gapon
be3d0087dc MFV r258665: 4347 ZPL can use dmu_tx_assign(TXG_WAIT)
illumos/illumos-gate@e722410c49

MFC after:	9 days
X-MFC after:	r258632
2013-11-28 19:44:36 +00:00
Ed Maste
ed4c8729a2 Purely cosmetic change: order DT_REL* and DT_RELA* consistently.
From projects/uefi, r246107

Sponsored by:	The FreeBSD Foundation
2013-11-28 19:41:03 +00:00
Peter Wemm
b5019bc45b jail_v0.ip_number was always in host byte order. This was handled
in one of the many layers of indirection and shims through stable/7
in jail_handle_ips().  When it was cleaned up and unified through
kern_jail() for 8.x, the byte order swap was lost.

This only matters for ancient binaries that call jail(2) themselves
internally.
2013-11-28 19:40:33 +00:00
Andriy Gapon
456a87bb3b MFV r258371,r258372: 4101 metaslab_debug should allow for fine-grained control
4101 metaslab_debug should allow for fine-grained control
4102 space_maps should store more information about themselves
4103 space map object blocksize should be increased
4104 ::spa_space no longer works
4105 removing a mirrored log device results in a leaked object
4106 asynchronously load metaslab

illumos/illumos-gate@0713e232b7

Note that some tunables have been removed and some new tunables have
been added.  Of particular note, FreeBSD-only knob
vfs.zfs.space_map_last_hope is removed as it was a nop for some time now
(after one of the previous merges from upstream).

MFC after:	11 days
Sponsored by:	HybridCluster [merge]
2013-11-28 19:37:22 +00:00
Alexander Motin
03175483c2 - Add bucket size column to show uma DDB command.
- Add `show umacache` command to show alike stats for cache-only UMA zones.
2013-11-28 19:20:49 +00:00
Andriy Gapon
02727275c5 opensolaris compat: add taskq_wait emulation
MFC after:	10 days
2013-11-28 19:17:11 +00:00
Craig Rodrigues
8a65c0b93a Add some text to clarify that nslookup and dig are no longer in the base system
after the removal of BIND.
2013-11-28 19:13:05 +00:00
Andriy Gapon
73f82099ea add taskqueue_drain_all
This API has semantics similar to that of taskqueue_drain but acts on
all tasks that might be queued or running on a taskqueue.
A caller must ensure that no new tasks are being enqueued otherwise this
call would be totally meaningless.  For example, if the tasks are
enqueued by an interrupt filter then its interrupt must be disabled.

MFC after:	10 days
2013-11-28 18:56:34 +00:00
Pedro F. Giffuni
729f64d6ae libcpp: fix an underflow.
Obtained from:	OpenBSD (Rev 1.2)
MFC after:	2 weeks
2013-11-28 16:36:03 +00:00
Alexander V. Chernikov
a19b3f74af Simplify O_NAT opcode handling.
MFC after:	2 weeks
Sponsored by:	Yandex LLC
2013-11-28 15:28:51 +00:00
Michael Reifenberger
4506391d54 Add package additions support for pkgng by adding a new function cust_pkgng():
first bootstrap the pkg package (must be contained in the Pkg/ dir)
	then add the other packages
2013-11-28 11:06:18 +00:00
Alexander V. Chernikov
1058f17749 Check ipfw table numbers in both user and kernel space before rule addition.
Found by:	Saychik Pavel <umka@localka.net>
MFC after:	2 weeks
Sponsored by:	Yandex LLC
2013-11-28 10:28:28 +00:00
Nick Hibma
34ee1e4d3f Do a parallel buildworld & buildkernel (using NANO_PMAKE), but use a
single threaded installworld, installkernel and distribution (using
NANO_MAKE). Setting NANO_PMAKE to 'make -j 12' would otherwise bomb
during installation of world.

MFC after:	2 weeks
2013-11-28 08:54:15 +00:00
Andriy Gapon
7bc07f0575 fix a serious bug in r258632: offset parameter must be set in zio
In illumos all ioctl zio-s are "global" at the moment.  That is they act
on a whole disk, e.g. a cache flush command, and thus do not need either
offset or size parameters.
FreeBSD, on the other hand, has support for TRIM command and that
command requires proper offset and size parameters.
Without this fix all TRIM commands act on the start of any disk or
partition used by ZFS destroying any data there.

Pointyhat to:	avg
Tested by:	sbruno
MFC after:	3 days
X-MFC with:	r258632
Sponsored by:	HybridCluster
2013-11-28 08:48:49 +00:00
Gleb Smirnoff
4131c351c3 Fix some misinformation in netgraph manual pages.
Submitted by:	Dmitry Luhtionov <dmitryluhtionov gmail.com>
2013-11-28 06:45:30 +00:00
Mark Peek
bcc4cae9d6 Add myself to the committers-src list. 2013-11-27 23:26:54 +00:00
Neel Natu
b5b28fc9dc Add support for level triggered interrupt pins on the vioapic. Prior to this
commit level triggered interrupts would work as long as the pin was not shared
among multiple interrupt sources.

The vlapic now keeps track of level triggered interrupts in the trigger mode
register and will forward the EOI for a level triggered interrupt to the
vioapic. The vioapic in turn uses the EOI to sample the level on the pin and
re-inject the vector if the pin is still asserted.

The vhpet is the first consumer of level triggered interrupts and advertises
that it can generate interrupts on pins 20 through 23 of the vioapic.

Discussed with:	grehan@
2013-11-27 22:18:08 +00:00
Navdeep Parhar
10c273397e cxgbetool: "modinfo" command to display SFP+ module information.
trantor:~# cxgbetool t5nex0 modinfo 1
ID: SFP
Vendor FINISAR CORP.
SN AJ10JQR
PN FTLX8571D3BCL
Rev A
Temp: +35C
Vcc 3.225600V
TX Bias 2.176000uA
TX Power 0.588800mW
RX Power 0.486400mW

Submitted by:	gnn
2013-11-27 22:17:00 +00:00
Nathan Whitehorn
9b00150b2c This driver doesn't need the /options node, so don't check for it. 2013-11-27 22:02:55 +00:00
Nathan Whitehorn
a0d0d6d88b badaddr() is used only in the grackle PCI driver, so move its definition
there. Clean up a spurious setfault() declaration as well.
2013-11-27 22:01:09 +00:00
Juli Mallett
5ad283b3c6 Provide a helpful diagnostic when the minimum size rounded to the block size
would exceed the maximum size.  This can be a difficult problem to diagnose
if one is, for instance, using -s with a fixed size in a script and the bsize
calculated for a filesystem image changes, necessitating a re-rounding of the
image size or a hand-setting of the bsize.  Previously one would get a
cryptic message about how the size exceeded the maximum size, which normally
only happens if the contents of the image are larger than specified.
2013-11-27 21:55:43 +00:00
Nathan Whitehorn
1679c30254 Make RTAS calls, which call setfault() to recover from machine checks,
preserve any existing fault buffer. RTAS calls are meant to be safe from
interrupt context (and are indeed used there to implement the xics PIC
drvier). Without this, calling into RTAS in interrupt context would have
the effect of clearing any existing onfault state of the interrupted
thread, potentially leading to a panic.
2013-11-27 21:51:34 +00:00
Alexander Motin
cec48e002a Make UMA to not blindly force offpage slab header allocation for large
(> PAGE_SIZE) zones.  If zone is not multiple to PAGE_SIZE, there may
be enough space for the header at the last page, so we may avoid extra
header memory allocation and hash table update/lookup.

ZFS creates bunch of odd-sized UMA zones (5120, 6144, 7168, 10240, 14336).
This change gives good use to at least some of otherwise lost memory there.

Reviewed by:	avg
2013-11-27 20:56:10 +00:00
George V. Neville-Neil
4fe3b90bd3 Add constants for use in interrogating various fiber and copper connectors
most often used with network interfaces.

The SFF-8472 standard defines the information that can be retrieved
from an optic or a copper cable plugged into a NIC, most often
referred to as SFP+.  Examples of values that can be read
include the cable vendor's name, part number, date of manufacture
as well as running data such as temperature, voltage and tx
and rx power.

Copious comments on how to use these values with an I2C interface
are given in the header file itself.

MFC after:	2 weeks
2013-11-27 20:20:02 +00:00
Alexander Motin
f7104ccd94 Don't count bucket allocation failures for UMA zones as their own failures.
There are good reasons for this to happen, such as recursion prevention, etc.
and they are not fatal since buckets are just an optimization mechanism.
Real bucket allocation failures are any way counted by the bucket zones
themselves, and we don't need double accounting there.
2013-11-27 20:16:18 +00:00
Alexander Motin
e8a720fe60 Fix bug introduced at r252226, when udata argument passed to bucket_alloc()
was used without making sure first that it was really passed for us.

On some of my systems this bug made user argument passed by ZFS code to
uma_zalloc_arg() unexpectedly block UMA per-CPU caches for those zones.
2013-11-27 19:55:42 +00:00
Navdeep Parhar
2471928bf8 Disable an assertion that relies on some code[1] that isn't in HEAD yet.
[1] http://lists.freebsd.org/pipermail/freebsd-net/2013-August/036573.html
2013-11-27 19:54:19 +00:00
Peter Wemm
17e27327de Revert r258672. We clearly don't compile libraries enough times. 2013-11-27 19:51:50 +00:00
Stefan Eßer
95bd7290ab - add myself to the committers list (it's about time,
having been a committer for more than 19 years ...)
2013-11-27 19:12:29 +00:00
Juli Mallett
c69a7a718d Fix fdisk(8) to create 2TB partitions on disks larger than 2TB, rather than
only being able to create 1TB partitions:
o) Use an unsigned 32-bit quantity to store the number of disk sectors.
o) Detect overflow of said 32-bit quantity and clamp to 2^32.
o) Rather than returning the disk sector count from get_params, return 0 on
   success, since its return value is only ever compared to -1 to detect
   failure.  This would cause returning 2^32 sectors to be interpreted as an
   error.

Reviewed by:	bde ("good for a quick fix")
2013-11-27 17:59:13 +00:00
Roger Pau Monné
168d70db8a Add myself to the committers-src list.
Approved by: gibbs (mentor)
2013-11-27 15:58:07 +00:00
Alexander Motin
7ae1a87bfe Escape special XML chars, returned by some devices, confusing XML parsers.
MFC after:	1 month
2013-11-27 14:25:06 +00:00
Luiz Otavio O Souza
1321636050 Connect the two recently added man pages to the system's install process.
Approved by:	adrian (mentor)
2013-11-27 12:17:05 +00:00
Luiz Otavio O Souza
c1bc07dada Fix the led 'gpios' definition to match the description on
sys/boot/fdt/dts/bindings-gpio.txt.  Make the led pin an output, add the
missing flag field.  No functional change (gpioled(4) isn’t supported on
FDT systems yet).

Approved by:	adrian (mentor)
2013-11-27 12:12:37 +00:00
Alexander V. Chernikov
4d47b0d69c Fix key lookup in ipfw(8) broken since r232865.
Print warning for IPv4 address strings which are valid in
inet_aton() but not valid in inet_pton(). (1)

Found by:	Özkan KIRIK <ozkan.kirik@gmail.com>
Submitted by:	Ian Smith <smithi@nimnet.asn.au> (1)
MFC after:	2 weeks
Sponsored by:	Yandex LLC
2013-11-27 10:10:25 +00:00
Sergey Kandaurov
d9140d3691 Bandaid for compiling with gcc. 2013-11-27 08:39:48 +00:00
Gleb Smirnoff
4678c74014 Fix build. 2013-11-27 07:21:25 +00:00
Peter Grehan
384305ff48 Don't create an initial value for the host filesystem of "/".
This has the unintended effect of booting the host kernel if
a disk image open fails.

Discussed with:	neel
2013-11-27 06:07:03 +00:00
Peter Wemm
ff678e6c81 At great personal risk, change the default for LIB32 from yes to no. As
mentioned in UPDATING, you can even do it as an as-needed operation after
doing a buildworld/installworld.  You can set WITH_LIB32=yes in make.conf
or src.conf.
2013-11-27 04:54:23 +00:00