Before this patch function ofw_bus_find_compatible was using
memory allocations in order to find compatible node and the property's
length. This way there was always a suited buffer for property,
however this approach had also disadvantages - ofw_bus_find_compatible
couldn't be used when malloc is not available, e.g. during fdt fixup stage.
In order to remove the usage limitation of ofw_bus_find_compatible(),
this patch modifies the function to use ofw_bus_node_is_compatible()
(instead of the one without _int suffix), which uses a fixed
buffer on stack instead of dynamic allocations.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: nwhitehorn, cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11880
Adding features for matching is fairly straightforward, but this requires
some duplication because of this fast/slow setup. They can be fairly
trivially combined into a single walk(), so do it to make future additions
less error prone.
Reviewed by: cem (earlier version), emaste, pfg
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D11233
Sometimes it's convenient to provide fixup to many boards
that use the same SoC family (eg. Marvell Armada 38x).
Instead of putting multiple entries in fdt_fixup_table,
use one entry which refers to all boards with given SoC.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: nwhitehorn, cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11878
Because fdt_get_ranges can process now multiple 'ranges' entries,
restoring the ranges from original Linux device trees is possible.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11877
This patch makes possible to boot with up to 8 ranges in soc.
Dynamic allocation cannot be used, because ftd_get_ranges
function is called early, when malloc is not available.
Change is required for the alignment of Marvell Armada 38x
device trees present in sys/gnu/dts/arm - originally
the platform has 6 entries in simple-bus 'ranges'.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: manu, nwhitehorn, cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11876
transfers in their probe() or attach() routines, and that doesn't work
when the low-level controller requires interrupts to be functional.
The DS133x family of chips is nearly identical to the DS1307 and support
for them should be added to that driver, then the ds133x driver can be
deleted. The s35390a driver just needs a non-trivial workover. In both
cases that work will be done and committed separately.
This is an import of Alexander Bluhm's OpenBSD commit r1.60,
the first chunk had to be modified because on OpenBSD the
'cut' declaration is located elsewhere.
Upstream report by Jingmin Zhou:
https://marc.info/?l=openbsd-pf&m=150020133510896&w=2
OpenBSD commit message:
Use a 32 bit variable to detect integer overflow when searching for
an unused nat port. Prevents a possible endless loop if high port
is 65535 or low port is 0.
report and analysis Jingmin Zhou; OK sashan@ visa@
Quoted from: https://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/net/pf_lb.c
PR: 221201
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: OpenBSD via ElectroBSD
MFC after: 1 week
libefivar expects opening /dev/efi to indicate if the we can make efi
runtime calls. With a null routine, it was always succeeding leading
efi_variables_supported() to return the wrong value. Only succeed if
we have an efi_runtime table. Also, while I'm hear, out of an
abundance of caution, add a likely redundant check to make sure
efi_systbl is not NULL before dereferencing it. I know it can't be
NULL if efi_cfgtbl is non-NULL, but the compiler doesn't.
As peter@ points out in pr/220953:
"rwho, rwhod and ruptime are not part of the remote login suite (rsh, rlogin
etc).
They should *not* be in the rcmds package which is disabled by default. We
rely on rwho/rwhod/ruptime in the freebsd.org cluster."
This commit is a re-commit of r322029 and r322031 with a better commit log, as
pointed out by ngie@.
This also includes the necesary changes to OptionalObsoleteFiles.inc, as
requested by jhb@.
PR: 220953
Reported by: peter@, jhb@
Differential Revision: https://reviews.freebsd.org/D11743
LinuxKPI workqueue wrappers reported "successful" cancellation for works
already completed in normal way. This change brings reported status and
real cancellation fact into sync. This required for drm-next operation.
Reviewed by: hselasky (earlier version)
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D11904
If mly_user_command fails to allocate a command slot it jumps to an 'out'
label used for error handling. The error handling code checks for a data
buffer in 'mc->mc_data' to free before checking if 'mc' is NULL. Fix by
just returning directly if we fail to allocate a command and only using
the 'out' label for subsequent errors when there is actual cleanup to
perform.
PR: 217747
Reported by: PVS-Studio
Reviewed by: emaste
MFC after: 1 week
p1003_1b.aio_listio_max is now a tunable. Its value is reflected in the
sysctl of the same name, and the sysconf(3) variable _SC_AIO_LISTIO_MAX.
Its value will be bounded from below by the compile-time constant
AIO_LISTIO_MAX and from above by the compile-time constant
MAX_AIO_QUEUE_PER_PROC and the tunable vfs.aio.max_aio_queue.
Reviewed by: jhb, kib
MFC after: 3 weeks
Relnotes: yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D11601
Also improve the formatting of the corresponding KASSERT message.
Based on the submission by: Svyatoslav <razmyslov@viva64.com>
Found by: PVS-Studio
PR: 217741
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 1 week
When displaying in non-human form, if the free-memory number
is large (more than 7 digits), there is no space between it and
the page fault column.
PR: 221290
Submitted by: Josuah Demangeon <mail@josuah.net> (Original version)
input errors in the mlx5en(4) driver. This improves the sysadmin view of
physical port errors.
Submitted by: gallatin@
MFC after: 1 week
Sponsored by: Mellanox Technologies
The m_defrag() function can only defrag mbuf chains which have a valid
mbuf packet header. In r291699 when the mlx4en(4) driver was converted
into using BUSDMA(9), the call to m_defrag() was moved after the part
of the transmit routine which strips the header from the mbuf chain.
This effectivly disabled the mbuf defrag mechanism and such packets
simply got dropped.
This patch removes the stripping of mbufs from a chain and loads all
mbufs using busdma. If busdma finds there are no segments, unload
the DMA map and free the mbuf right away, because that means all
data in the mbuf has been inlined in the TX ring. Else proceed
as usual.
Add a per-ring rounter for the number of defrag attempts and
make sure the oversized_packets counter gets zeroed while at it.
The counters are per-ring to avoid excessive cache misses in the
TX path.
Submitted by: mjoras@
Differential Revision: https://reviews.freebsd.org/D11683
MFC after: 1 week
Sponsored by: Mellanox Technologies
illumos/illumos-gate@d28671a3b0d28671a3b0https://www.illumos.org/issues/8373
The code that writes ZIL blocks uses dmu_tx_assign(TXG_WAIT) to assign
a transaction to a transaction group. That seems to be logically
incorrect as writing of the ZIL block does not introduce any new dirty
data. Also, when there is a lot of dirty data, the call can introduce
significant delays into the ZIL commit path, thus affecting all
synchronous writes. Additionally, ARC throttling may affect the ZIL
writing.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 2 weeks
illumos/illumos-gate@d28671a3b0d28671a3b0https://www.illumos.org/issues/8373
The code that writes ZIL blocks uses dmu_tx_assign(TXG_WAIT) to assign a
transaction to a transaction group.
That seems to be logically incorrect as writing of the ZIL block does not
introduce any new dirty data.
Also, when there is a lot of dirty data, the call can introduce significant
delays into the ZIL commit path,
thus affecting all synchronous writes. Additionally, ARC throttling may affect
the ZIL writing.
We probably need a new mechanism similar to dmu_tx_create_assigned to assign
ZIL transactions.
(Ab)using TXG_WAITED does not seem to be sufficient.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
illumos/illumos-gate@79c2b812ee79c2b812eehttps://www.illumos.org/issues/8491
The zpool checkpoint feature in DxOS added a new field in the uberblock.
The Multi-Modifier Protection Pull Request from ZoL adds two new fields in the
uberblock (Reference: https://github.com/zfsonlinux/zfs/pull/6279).
As these two changes come from two different sources and once upstreamed and
deployed will introduce an incompatibility with each other we want
to upstream a change that will reserve the padding for both of them so
integration goes smoothly and everyone gets both features.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Olaf Faaland <faaland1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@79c2b812ee79c2b812eehttps://www.illumos.org/issues/8491
The zpool checkpoint feature in DxOS added a new field in the uberblock.
The Multi-Modifier Protection Pull Request from ZoL adds two new fields in the
uberblock (Reference: https://github.com/zfsonlinux/zfs/pull/6279).
As these two changes come from two different sources and once upstreamed and
deployed will introduce an incompatibility with each other we want
to upstream a change that will reserve the padding for both of them so
integration goes smoothly and everyone gets both features.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Olaf Faaland <faaland1@llnl.gov>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
illumos/illumos-gate@267ae6c3a8267ae6c3a8https://www.illumos.org/issues/7915
l2arc_evict() is strictly serialized with respect to
l2arc_write_buffers() and l2arc_write_done(). Normally, l2arc_evict()
and l2arc_write_buffers() are called from the same thread, so they can
not be concurrent. Also, l2arc_write_buffers() uses zio_wait() on the
parent zio of all cache zio-s. That ensures that l2arc_write_done()
is completed before l2arc_write_buffers() returns. Finally, if a
cache device is removed, then l2arc_evict() is called under SCL_ALL in
the exclusive mode. That ensures that it can not be concurrent with
the normal L2ARC accesses to the device (including writing and
evicting buffers). Given the above, some checks and actions in
l2arc_evict() do not make sense. For instance, it must never
encounter the write head header let alone remove it from the buffer
list.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 2 weeks
illumos/illumos-gate@267ae6c3a8267ae6c3a8https://www.illumos.org/issues/7915
l2arc_evict() is strictly serialized with respect to l2arc_write_buffers() and
l2arc_write_done().
Normally, l2arc_evict() and l2arc_write_buffers() are called from the same
thread, so they can not be concurrent.
Also, l2arc_write_buffers() uses zio_wait() on the parent zio of all cache zio-
s.
That ensures that l2arc_write_done() is completed before l2arc_write_buffers()
returns.
Finally, if a cache device is removed, then l2arc_evict() is called under
SCL_ALL in the exclusive mode.
That ensures that it can not be concurrent with the normal L2ARC accesses to
the device (including writing and evicting buffers).
Given the above, some checks and actions in l2arc_evict() do not make sense.
For instance, it must never encounter the write head header let alone remove it
from the buffer list.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Andriy Gapon <avg@FreeBSD.org>
illumos/illumos-gate@dcb6872c56dcb6872c56https://www.illumos.org/issues/8126
The sync thread is concurrently modifying dn_phys->dn_nlevels
while dbuf_dirty() is trying to assert something about it, without
holding the necessary lock. We need to move this assertion further down
in the function, after we have acquired the dn_struct_rwlock.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@dcb6872c56dcb6872c56https://www.illumos.org/issues/8126
The sync thread is concurrently modifying dn_phys->dn_nlevels
while dbuf_dirty() is trying to assert something about it, without
holding the necessary lock. We need to move this assertion further down
in the function, after we have acquired the dn_struct_rwlock.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@4923c69fdd4923c69fddhttps://www.illumos.org/issues/8067
Add an option to zdb to print a literal embedded block pointer supplied on the
command line:
zdb -E [-A] word0:word1:...:word15
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@9b195260e29b195260e2https://www.illumos.org/issues/8426
abd_copy_from_buf and abd_cmp_buf do not modify their void *buf arguments, so
qualify them with const.
abd_copy_from_buf_off and abd_cmp_buf_off already had that type for the
corresponding arguments.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 2 weeks
illumos/illumos-gate@9b195260e29b195260e2https://www.illumos.org/issues/8426
abd_copy_from_buf and abd_cmp_buf do not modify their void *buf arguments, so
qualify them with const.
abd_copy_from_buf_off and abd_cmp_buf_off already had that type for the
corresponding arguments.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
illumos/illumos-gate@77b171372e77b171372ehttps://www.illumos.org/issues/7600
At present, the kernel side code seems to blindly rollback to whatever happens
to be the latest snapshot at the time when the rollback task is processed.
The expected target's name should be passed to the kernel driver and the sync
task should validate that the target exists and that it is the latest snapshot
indeed.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 3 weeks
illumos/illumos-gate@77b171372e77b171372ehttps://www.illumos.org/issues/7600
At present, the kernel side code seems to blindly rollback to whatever happens
to be the latest snapshot at the time when the rollback task is processed.
The expected target's name should be passed to the kernel driver and the sync
task should validate that the target exists and that it is the latest snapshot
indeed.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
illumos/illumos-gate@42418f9e7342418f9e73https://www.illumos.org/issues/8377
The problem is that when dsl_bookmark_destroy_check() is executed from open
context (the pre-check), it fills in dbda_success based on the existence of the
bookmark.
But the bookmark (or containing filesystem as in this case) can be destroyed
before we get to syncing context. When we re-run dsl_bookmark_destroy_check()
in syncing
context, it will not add the deleted bookmark to dbda_success, intending for
dsl_bookmark_destroy_sync() to not process it. But because the bookmark is
still in dbda_success
from the open-context call, we do try to destroy it.
The fix is that dsl_bookmark_destroy_check() should not modify dbda_success
when called from open context.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@42418f9e7342418f9e73https://www.illumos.org/issues/8377
The problem is that when dsl_bookmark_destroy_check() is executed from open
context (the pre-check), it fills in dbda_success based on the existence of the
bookmark.
But the bookmark (or containing filesystem as in this case) can be destroyed
before we get to syncing context. When we re-run dsl_bookmark_destroy_check()
in syncing
context, it will not add the deleted bookmark to dbda_success, intending for
dsl_bookmark_destroy_sync() to not process it. But because the bookmark is
still in dbda_success
from the open-context call, we do try to destroy it.
The fix is that dsl_bookmark_destroy_check() should not modify dbda_success
when called from open context.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@b7edcb9408b7edcb9408https://www.illumos.org/issues/8378
The problem is that zfs_get_data() supplies a stale zgd_bp to dmu_sync(), which
we then nopwrite against.
zfs_get_data() doesn't hold any DMU-related locks, so after it copies db_blkptr
to zgd_bp, dbuf_write_ready()
could change db_blkptr, and dbuf_write_done() could remove the dirty record.
dmu_sync() then sees the stale
BP and that the dbuf it not dirty, so it is eligible for nop-writing.
The fix is for dmu_sync() to copy db_blkptr to zgd_bp after acquiring the
db_mtx. We could still see a stale
db_blkptr, but if it is stale then the dirty record will still exist and thus
we won't attempt to nopwrite.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@b7edcb9408b7edcb9408https://www.illumos.org/issues/8378
The problem is that zfs_get_data() supplies a stale zgd_bp to dmu_sync(), which
we then nopwrite against.
zfs_get_data() doesn't hold any DMU-related locks, so after it copies db_blkptr
to zgd_bp, dbuf_write_ready()
could change db_blkptr, and dbuf_write_done() could remove the dirty record.
dmu_sync() then sees the stale
BP and that the dbuf it not dirty, so it is eligible for nop-writing.
The fix is for dmu_sync() to copy db_blkptr to zgd_bp after acquiring the
db_mtx. We could still see a stale
db_blkptr, but if it is stale then the dirty record will still exist and thus
we won't attempt to nopwrite.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
FreeBD note: the essence of this change was committed to FreeBSD in
r314274. This commit catches up with differences between what was
committed to FreeBSD and what was committed to OpenZFS, mainly more
logical variable names.
illumos/illumos-gate@16a7e5ac1116a7e5ac11https://www.illumos.org/issues/7910
It seems that the change in issue #6950 resurrected the problem that was
earlier fixed by the change in issue #5219.
Please also see the following FreeBSD bug report:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=216178
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 2 weeks
illumos/illumos-gate@16a7e5ac1116a7e5ac11https://www.illumos.org/issues/7910
It seems that the change in issue #6950 resurrected the problem that was
earlier fixed by the change in issue #5219.
Please also see the following FreeBSD bug report: https://bugs.freebsd.org/
bugzilla/show_bug.cgi?id=216178
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
illumos/illumos-gate@5e2a0747255e2a074725https://www.illumos.org/issues/8416
A C++ compiler fails to compile abd_is_linear(), which is an inline function
defined in abd.h, with the following error:
error: cannot initialize return object of type 'boolean_t' with an
rvalue of type 'bool'
That happens because a bool can not be converted to an enum in C++.
That's a problem because abd.h can be visible through other header files that a
C++ program that works with ZFS can include.
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
illumos/illumos-gate@e09ba01dcde09ba01dcdhttps://www.illumos.org/issues/8418
The following line in zfs_validate_name() is just a no-op and it
should be removed:
108 (void) zfs_prop_get_table();
Reviewed by: Vitaliy Gusev <gusev.vitaliy@icloud.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Marcel Telka <marcel@telka.sk>
MFC after: 2 weeks
illumos/illumos-gate@e09ba01dcde09ba01dcdhttps://www.illumos.org/issues/8418
The following line in zfs_validate_name() is just a no-op and it should be
removed:
108 (void) zfs_prop_get_table();
Reviewed by: Vitaliy Gusev <gusev.vitaliy@icloud.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Marcel Telka <marcel@telka.sk>
Executable bits should be set at install time instead of in the repo.
Setting executable bits on files triggers false positives with Phabricator.
MFC after: 2 months
