Normally, we can get away with just reading the 1k buffer for the
string, since the placement of the data is generally no where near the
end of the file. However, it's possible that the string is within the
last 1k of the file, in which case the read will fail, and we'll not
produce the proper records needed for devmatch to work. By reading
using EF_SEG_READ_STRING, we automatically work around these problems
while still retaining safety.
This fix a problem with devmatch where we wouldn't load certain
modules (like ums). This didn't always happen (my tree didn't exhibit
it, while nathan's did because his optimization options were more
agressive).
Reported by: nathanw@
Simple fix to address panics relating to setting IPV6_TCLASS
with setsockopt(). The premise of this change is that it is
ok to call malloc with M_NOWAIT while holding a lock on the
in6p.
If it later turns out that it is not ok, then major surgery
will be required, as ip6_setpktopt() will have to be fixed
(as it also calls malloc with M_NOWAIT) which pulls in the
ip6_pcbopts(), ip6_setpktopts(), ip6_setpktopt() call chain.
Submitted by: Jason Eggnet
Reviewed by: rrs, transport, sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16201
This corresponds to the latest status (hasn't changed in 9+
years) from openbsd of ld80/ld128 powl, and source cpowf, cpow,
cpowl (the complex power functions for float complex, double
complex, and long double complex) which are required for C99
compliance and were missing from FreeBSD. Also required for
some numerical codes using complex numbered Hamiltonians.
Thanks to jhb for tracking down the issue with making
weak_reference compile on powerpc.
When asked to review, bde said "I don't like it" - but
provided no actionable feedback or superior implementations.
Discussed with: jhb
Submitted by: jmd
Differential Revision: https://reviews.freebsd.org/D15919
Doing so ensures that all threads sharing the pmap have a consistent
view of the mapping. This fixes the problem described in the commit
log message for r329254 without the overhead of an extra page fault
in the common case. (Now that all pmap_enter() implementations are
similarly modified, the workaround added in r329254 can be removed,
reducing the overhead of COW faults.)
With this change we can reuse the PV entry from the old mapping,
potentially avoiding a call to reclaim_pv_chunk(). Otherwise, there is
nothing preventing the old PV entry from being reclaimed. In rare
cases this could result in the PTE's page table page being freed,
leading to a use-after-free of the page when the updated PTE is written
following the allocation of the PV entry for the new mapping.
Reviewed by: br, markj
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D16261
Without this patch, the client side NFSv4.1 pNFS code erroneously did writes
and commits to both DS mirrors using the TCP connection of the first one.
For my test setup this worked, since I have both DSs running on the same
machine, but it would have failed when the DSs are on separate machines.
This patch fixes the code to use the correct TCP connection for each DS.
This patch should only affect the NFSv4.1 client when using "pnfs" mounts
to mirrored DSs.
MFC after: 2 weeks
Since we don't have /usr/bin/ksh, use a generic way of specifying
ksh. Some of the tests only run with ksh93, so use this shell
for these tests. Two of the tests don't have the execute bit set,
so fix this, too.
Reviewed by: markj@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16270
add support for explicitly requesting that pmap_enter() create a 2 or 4 MB
page mapping. (Essentially, this feature allows the machine-independent
layer to create superpage mappings preemptively, and not wait for automatic
promotion to occur.)
Export pmap_ps_enabled() to the machine-independent layer.
Add a flag to pmap_pv_insert_pde() that specifies whether it should fail or
reclaim a PV entry when one is not available.
Refactor pmap_enter_pde() into two functions, one by the same name, that is
a general-purpose function for creating PDE PG_PS mappings, and another,
pmap_enter_4mpage(), that is used to prefault 2 or 4 MB read- and/or
execute-only mappings for execve(2), mmap(2), and shmat(2).
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D16246
In some cases it seems that the PHY mode can only be identified by
matching against the corresponding device node name in the FDT. r334880
broke this for the case where the node name contains a unit address.
Fix the problem by allowing a match in that case.
Reviewed by: andrew, sbruno
Tested by: sbruno
Differential Revision: https://reviews.freebsd.org/D16259
It can occur during ordinary use of softupdates, or perhaps if writes to the
underlying media fail (causing bufs to be redirtied). Either way, it is not
particularly actionable.
Reviewed by: imp, kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16258
Synproxy was accidentally broken by r335569. The 'return (action)' must be
executed for every non-PF_PASS result, but the error packet (TCP RST or ICMP
error) should only be sent if the packet was dropped (i.e. PF_DROP) and the
return flag is set.
PR: 229477
Submitted by: Andre Albsmeier <mail AT fbsd.e4m.org>
MFC after: 1 week
The issue found with gcc6 build (originally on illumos, confirmed on FreeBSD).
Mark it __unused.
Differential Revision: https://reviews.freebsd.org/D13109
When shutting down a vnet jail pf_shutdown() clears the remaining states, which
through pf_clear_states() calls pf_unlink_state().
For synproxy states pf_unlink_state() will send a TCP RST, which eventually
tries to schedule the pf swi in pf_send(). This means we can't remove the
software interrupt until after pf_shutdown().
MFC after: 1 week
o Fix the parsing of the device path. a last minute change terminated
it too soon.
o Kill setting LINES. We don't need to do it, and even if we did hard
coding it to 24 is wrong.
o Now that the console is working again for the loader, adjust the
printfs to be more in line with other platforms.
note that r336270's commit message was slightly incorrect. It changed
the default setting of the console to honor the ConOut
variable. Overrides via the command line are still possible, and we
use the devices in ConOut to set the proper console. If, for example,
serial cosnole is specified, we'll set console to "efi" if ConOut has
a serial port list and to either "efi comconsole" or "comconsole efi"
if not depending on whether -D or -D -h was specified.
RelNotes: Yes
Sponsored by: Netflix
For server machines, ComOut is set to the set of devices that the efi
console suppots. Parse it to see if we have serial, video or both.
Make that take precidence over the command line args. boot1.efi parses
them, but loader.efi doesn't. It's not clear where to read boot.conf
from, so we don't do that. The command line args can still be set via
efibootmgr, which is more inline with the UEFI boot manager to replace
that. These args are typically used only to set serial vs video and
the com speed line. We can infer that from ComOut, so do so.
Remember the com speed and hw.uart.console to match.
RelNotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15917
So long as the TCP connection to a pNFS DS isn't shared with other DSs,
it can be closed down when the DS is being disabled in the pNFS client.
This causes any RPCs in progress to fail.
This patch only affects the NFSv4.1 pNFS client when errors occur
while doing I/O on a DS.
MFC after: 2 weeks
Xilinx Ultrascale+ are based on Cortex-A53 and use existing
UART driver (uart_dev_cdnc). Enable it in arm64 GENERIC config.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
This moves the bulk of the geli support from lib386/biosdisk.c into a new
geli/gelidev.c which implements a devsw-type device whose dv_strategy()
function handles geli decryption. Support for all arches comes from moving
the taste-and-attach code to the devopen() function in libsa.
After opening any DEVT_DISK device, devopen() calls the new function
geli_probe_and_attach(), which will "attach" the geli code to the open_file
struct by creating a geli_devdesc instance to replace the disk_devdesc
instance in the open_file. That routes all IO for the device through the
geli code.
A new public geli_add_key() function is added, to allow arch/vendor-specific
code to add keys obtained from custom hardware or other sources.
With these changes, geli support will be compiled into all variations of
loader(8) on all arches because the default is WITH_LOADER_GELI.
Relnotes: yes
Sponsored by: Microchip Technology Inc
Differential Revision: https://reviews.freebsd.org/D15743
to it being a common name elsewhere. Rename the old kzip one
to subr_inflate.c.
This actually fixes the build issues on sparc64 that my inclusion of
.PATH ${SYSDIR}/kern created in r336244, so also revert the broken
workaround I committed in r336249.
This slipped passed me because apparently, I never did a clean build.
Doing so ensures that all threads sharing the pmap have a consistent
view of the mapping. This fixes the problem described in the commit
log message for r329254 without the overhead of an extra fault in the
common case. (Once the riscv pmap_enter() implementation is similarly
modified, the workaround added in r329254 can be removed, reducing the
overhead of CoW faults.)
See also r335784 for amd64. The mips implementation of pmap_enter()
already reused the PV entry from the old mapping.
Reviewed by: kib, markj
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D16199
Eliminate 4 of the copies of the arg parsing in /boot/laoder
by using boot_parse_cmdline.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16205
