interrupts. Bringup on additional machine models repeatedly reveals
firmware that enables interrupts behind our back, causing the console
to be flooded otherwise.
- As with the regular interrupt counters using uint16_t instead of
u_long for counting the stray vector interrupts should be more than
sufficient.
- Cache the interrupt vector in intr_stray_vector().
o Set TP using inline assembly to avoid dead code elimination.
o Eliminate _tcb.
Merge from r161840:
Stylize: avoid using a global register variable.
Merge from r157461:
Simplify _get_curthread() and _tcb_ctor because libc and rtld now
already allocate thread pointer space in tls block for initial thread.
Merge from r177853:
Replace function _umtx_op with _umtx_op_err, the later function directly
returns errno, because errno can be mucked by user's signal handler and
most of pthread api heavily depends on errno to be correct, this change
should improve stability of the thread library.
MFC after: 1 week
With the current sh, placing eval in a command substitution always results
in a fork(), even if it is the only command and only executes a single
simple command. Therefore, avoid it where it can be avoided easily.
Side effect: values starting with a hyphen and all whitespace are preserved.
The values are defaults and names for rc.conf variables and messages to be
given about obsolete ones.
MFC after: 2 weeks
On MP systems this is not a usable solution anymore and could easily
lead to false positives triggering enough logging that even using
the console was no longer usable (multiple parallel ping -f can do).
Switch to the suggested solution of using mbuf tags to carry per
packet state between gre_output() invocations. Contrary to the
proposed solution modelled after gif(4) only allocate one mbuf tag
per packet rather than per packet and per gre_output() pass through.
As the sysctl to control the possible valid (gre in gre) nestings does
no sanity checks, make sure to always allocate space in the mbuf tag
for at least one, and at most 255 possible gre interfaces to detect
loops in addition to the counter.
Submitted by: Cristian KLEIN (cristi net.utcluj.ro) (original version)
PR: kern/114714
Reviewed by: Cristian KLEIN (cristi net.utcluj.ro)
Reviewed bu: Wooseog Choi (ben_choi hotmail.com)
Sponsored by: Sandvine Incorporated
MFC after: 1 week
proceeding.
On boot, some laptops with certain cards in them sometimes fail on
boot, but if the card is inserted after boot it works. Experiments
show that small delays here makes things more reliable. It is
believed that some combinations need a little more time before the
power on the card is really stable enough to be reliable once the
power is stable in the bridge.
some times compiler inserts redundant instructions to preserve unused upper
32 bits even when it is casted to a 32-bit value. Unfortunately, it seems
the problem becomes more serious when it is shifted, especially on amd64.
This knob removes the tools that are exclusively used to view and
maintain the databases maintained by utmpx, namely last, users, who,
wtmpcvt, ac, lastlogin and utxrm.
The tool w is not in this list, because it has some other functionality
which is unrelated to utmpx; it is hardlinked to the uptime tool.
ACPI Device() objects that do not have any device IDs available via the
_HID or _CID methods. Without a device ID a device driver cannot attach
to the device anyway. Namespace objects that are devices but not of
type ACPI_TYPE_DEVICE are not affected.
A few BIOSes have also attached a _CRS method to a PCI device to
allocate resources that are not managed via a BAR. With the previous
code those resources are allocated from acpi0 directly which can interfere
with the new PCI-PCI bridge driver (since the PCI device in question may
be behind a bridge and its resources should be allocated from that
bridge's windows instead). The resources were also orphaned and
and would end up associated with some other random device whose device_t
reused the pointer of the original ACPI-enumerated device (after it was
free'd by the ACPI PCI bus driver) in devinfo output which was confusing.
If we want to handle _CRS on PCI devices we can adjust the ACPI PCI bus
driver to do that in the future and associate the resources with the
proper device object respecting PCI-PCI bridges, etc.
Note that with this change the ACPI PCI bus driver no longer has to
delete ACPI-enumerated device_t devices that mirror PCI devices since
they should in general not exist. There are rare cases when a BIOS
will give a PCI device a _HID (e.g. I've seen a PCI-ISA bridge given
a _HID for a system resource device). In that case we leave both the
ACPI and PCI-enumerated device_t objects around just as in the previous
code.
The WITHOUT_ACCT switch is supposed to omit tools related to process
accounting, namely accton and sa. ac(8) is just a simple tool that
prints statistics based on data in the utx.log database. It has nothing
to do with the former.
method instead of reusing the existing per-queue interrupt task.
Reusing the per-queue interrupt task could result in both an interrupt
thread and the taskqueue thread trying to handle received packets on a
single queue resulting in out-of-order packet processing.
- Don't define igb_start() at all on 8.0 and where if_transmit is used.
Replace last remaining call to igb_start() with a loop to kick off
transmit on each queue instead.
- Call ether_ifdetach() earlier in igb_detach().
- Drain tasks and free taskqueues during igb_detach().
Reviewed by: jfv
MFC after: 1 week
Replacing ;; with the new control operator ;& will cause the next list to be
executed as well without checking its pattern, continuing until a list ends
with ;; or until the end of the case statement. This is like omitting
"break" in a C "switch" statement.
The sequence ;& was formerly invalid.
This feature is proposed for the next POSIX issue in Austin Group issue
#449.
applicable here, since modifies the string. Switch to strchr().
- Restore support for undocumented optional parameters of
redir_port and redir_proto, that were disabled in 220835.
- While here, change !isalpha() checks on optinal parameters
for isdigit().
Submitted by: Alexander V. Chernikov <melifaro ipfw.ru>
PR: kern/143653
space. This is consistent with the behavior in linux.
PR: kern/157871
Reported by: Petr Salinger <Petr Salinger att seznam cz>
Verified on: GNU/kFreeBSD debian 8.2-1-amd64 (by reporter)
Reviewed by: kib (some time ago)
MFC after: 2 weeks
only receiving the data. In r220271 the unused directions were
disabled using shutdown(2).
Unfortunately, this broke automatic receive buffer sizing, which
currently works only for connections in ETASBLISHED state. It was a
root cause of the issue reported by users, when connection between
primary and secondary could get stuck.
Disable the code introduced in r220271 until the issue with automatic
buffer sizing is not resolved.
Reported by: Daniel Kalchev <daniel@digsys.bg>, danger, sobomax
Tested by: Daniel Kalchev <daniel@digsys.bg>, danger
Approved by: pjd (mentor)
MFC after: 1 week
stream of the local processor. Also explicitly invalidate
the ALAT. This is done on the other CPUs in the coherence
domain by virtue of the ptc.ga instruction, but does not
apply to the local CPU.
and usr.sbin/makefs/ffs/ffs_subr.c as they have no need of anything in that
file. No other programs or libraries include <ufs/ffs/ffs_extern.h> (nor
should they as it is totally in-kernel interfaces). For added protection
I enclosed the entire contents of <ufs/ffs/ffs_extern.h> in ifdef _KERNEL.
Feedback from: Bruce Evans and Tai-hwa Liang
The eval special builtin now runs the code with EV_EXIT if it was run
with EV_EXIT itself.
In particular, this eliminates one fork when a command substitution contains
an eval command that ends with an external program or a subshell.
This is similar to what r220978 did for functions.
