1) Don't give up if m_collapse() fails. Rather than giving up, try
m_defrag() immediately.
2) Fix a leak where, if the NIC driver rejected the defrag'ed chain
as having too many segments, we would fail to free the chain.
Reviewed by: Matthew Macy <mmacy@mattmacy.io> (this version of patch)
Submitted by: Matthew Macy <mmacy@mattmacy.io> (early version of leak fix)
This change allows clean device detach on attach failures and driver unload,
while previous code tried to talk to already shut down controller, or even
accessed resources failed to allocate.
Sponsored by: iXsystems, Inc.
Reserve 3b in the 14b atid to identify the owner and use it to dispatch
the CPL. This allows all CPLs that use an atid to be used as shared
CPLs, although ACT_OPEN_RPL is the only one being converted in this
revision.
Sponsored by: Chelsio Communications
dma_tag_payload should not be destroyed before payload_dma_map, and seems
it should be used there instead of dma_tag to match creation.
Sponsored by: iXsystems, Inc.
Resume starts CPU from the init state, which clears any loaded
microcode updates. As result, IBRS MSRs are no longer available,
until the microcode is reloaded.
I have to forcibly clear cpu_stdext_feature3, which assumes that CPUID
leaf 7 reg %ebx does not report anything except Meltdown/Spectre bugs
bits. If future CPUs add new bits there, hw_ibrs_recalculate() and
identify_cpu1()/identify_cpu2() need to be adjusted for that.
Submitted and tested by: Michael Danilov <mike.d.ft402@gmail.com>
PR: 227866
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15236
Previously it was possible to connect a socket (which had the
CAP_CONNECT right) by calling "connectat(AT_FDCWD, ...)" even in
capabilties mode. This combination should be treated the same as a call
to connect (i.e. forbidden in capabilities mode). Similarly for bindat.
Disable connectat/bindat with AT_FDCWD in capabilities mode, fix up the
documentation and add tests.
PR: 222632
Submitted by: Jan Kokemüller <jan.kokemueller@gmail.com>
Reviewed by: Domagoj Stolfa
MFC after: 1 week
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D15221
Discovered during investigation into the PR - the description of
AT_FDCWD was somewhat confusing.
PR: 222632
Submitted by: Jan Kokemüller <jan.kokemueller@gmail.com>
MFC after: 1 week
This can cause ibpanic in ibstat when width is not set properly
as can occur when Ethernet port is connected to InfiniBand fabric.
ibpanic: [8167] main: stat of IB device 'mlx5_0' failed: m
With this change, Rate is displayed as 0 with ibstat for
this scenario.
MFC after: 3 days
Approved by: hselasky (mentor), kib (mentor)
Sponsored by: Mellanox Technologies
intended recipient of a CPL when it can't be determined solely from the
opcode. Retire the per-queue handlers for such CPLs in favor of the new
scheme.
Sponsored by: Chelsio Communications
User-visible changes:
"-u" is added to to list of command line options supported by bthidd.
Use it to enable evdev support. uinput and evdev modules should be
kld-loaded or compiled into the kernel in that case.
bthidd_evdev_support rc.conf variable is added to control enabling of
evdev support in bthidd startup script. Possible values are: "YES", "NO",
"AUTO"(default). Setting bthidd_evdev_support to "AUTO" inserts "-u" option
if kernel is compiled with EVDEV_SUPPORT option enabled.
Support for consumer HID usage page keyboard events is implemented. Most of
them are available only through evdev protocol.
kern.evdev.rcpt_mask sysctl is checked, so "sysctl kern.evdev.rcpt_mask=12"
should be executed if EVDEV_SUPPORT is compiled into kernel.
It is recommended to regenerate bthidd.conf entries with bthidcontrol(8)
"Query" command to set user-friendly names of bluetooth devices.
Reviewed by: emax, gonzo, wblock (docs), bcr (docs, early version)
Differential Revision: https://reviews.freebsd.org/D13456
Extend bthidd.conf format to store name of remote Bluetooth HID devices and
implement querying of this information with bthidcontrol(8) "Query" command.
Reviewed by: emax
Differential Revision: https://reviews.freebsd.org/D13456
procedure to obtain the user-friendly name of another Bluetooth unit.
Reviewed by: emax, wblock (docs)
Differential Revision: https://reviews.freebsd.org/D13456
through a SYSCTL instead of a compile time define.
Add quirk by default for all LynxPoint XHCI controllers.
PR: 227602
MFC after: 3 days
Sponsored by: Mellanox Technologies
This can happen when the fsinfo signature is invalid, and the
user have choose to fix it, in which case the code would return
FSBOOTMOD (not FSOK but not FSFATAL either).
All other (fatal) cases would return FSFATAL.
Obtained from: Android Open Source Project
Obtained from: d8775a29ea
MFC after: 2 weeks
Per the datasheet, the BUSY bit must be set when reading or writing PHY
registers. From Linux commit 80928805babf.
Submitted by: Arshan Khanifar
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15217
In smsc_phy_init function, when the driver was trying to reset PHY, it
didn't poll for the correct bit (BMCR_RESET) to be cleared. Instead, it
anded it with MII_BMCR (which is 0), so it just exited the loop.
This issue was fixed in Linux in commit d94609200069.
Submitted by: Arshan Khanifar
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
For the vm_fault_prefault() call from vm_fault_soft_fast(), extend the
scope of the object rlock to avoid re-taking it inside
vm_fault_prefault(). It causes pmap_enter_quick() sometimes called
with shadow object lock as well as the page lock, but this looks
innocent.
Noted and measured by: mjg
Reviewed by: alc, markj (as part of the larger patch)
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15122
become redundant after documenting all the subcommands, and switches
to the new syntax, without the '-d'.
Reviewed by: hselasky@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
GCC warns about the potentially confusing use of the binary AND ('&')
operator with a left operand containing an addition expression. (The
confusion would be around the operator precedence between the + and & infix
operators.) The warning is converted into an error with -Werror.
No functional change.
This construct was actually introduced in r328083, but r333059 (re)moved the
closing parentheses.
For reference, see http://en.cppreference.com/w/c/language/operator_precedence .
On reload we used to first flush everything, including the list of skipped
interfaces. This can lead to termination of these connections if they send
packets before the new configuration is applied.
Note that this doesn't currently happen on 12 or 11, because of special EACCES
handling introduced in r315514. This special behaviour in tcp_output() may
change, hence the fix in pfctl.
PR: 214613
The default provides output in the following form:
```
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP
HEALTH ALTROOT
```
this corrects the man page.
Also submitted upstream as
https://github.com/openzfs/openzfs/pull/632/files (with slightly
different changes needed)
Name each ehci driver uniquely.
This remove the warning printed at each arm boot :
module_register: cannot register simplebus/ehci from kernel; already loaded from kernel
Name each ahci driver uniquely.
This remove the warning printed at each arm boot :
module_register: cannot register simplebus/ahci from kernel; already loaded from kernel
r307825 and r333017 disallow building FreeBSD-HEAD from 9.x or 10.x
versions that have some clang issues. The minimum supported Subversion
revisions and osreldates containing the fix are:
Version Min Rev osreldate
9.x r286035 903509
10.x r286033 1002501
9.3 is the final 9.x release and does not contain the r286035 fix.
10.3 is the first 10.x release with the fix. Thus, in practice 10.3 is
the oldest release that can build HEAD.
Although it may still be possible to build HEAD from an up-to-date
stable/9 it's not worth maintaining the special case when the branch
itself is unsupported and there are no usable releases from that branch.
Old UPDATING entries can be removed and the Clang warning in UPDATING
may be updated, in a future commit.
Approved by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15209
Previously, get_keyid() was returning the address of the receive key
instead of the transmit key when renegotiating the transmit key. This
could either hang the card (if a connection was only offloading TLS TX
and thus had a receive key address of -1) or cause the connection to
fail by overwriting the wrong key (if both RX and TX TLS were
offloaded).
Submitted by: Harsh Jain @ Chelsio
Sponsored by: Chelsio Communications
A pipe was was left over from a development version of pdeathsig.c and
is not needed.
Process C waits for a signal that'll be generated when process B
exists. Process B waits for process D to send it a byte via pipe_db
before it exits. Process D sends the byte after it has started
ptrace()ing process C. The point of the test is to show that process C
receives the signal because process B exited, even though C has been
reparented to process D. The pipe pipe_cd isn't doing anything useful
(though in an earlier version of the patch it did). Clean that up by
removing the useless pipe.
Submitted by: Thomas Munro
MFC after: 6 days
Differential revision: https://reviews.freebsd.org/D15214
While here predict false.
Note the code is wrong (regardless of this change). Dereference of the
pointer can race with module unload. A fix would set the probe to a
nop stub instead of NULL.
