in effect due to r250753. That is sufficient for all SoCs with a 32 byte
cache line size. Systems with 64 byte cache lines will need the option;
that will be done in a separate commit.
Thanks to loos@ for pointing out r250753.
A 32-bit libstand is needed on 64-bit platforms for use by various
bootloaders. Previously only the 32-bit version was built, installed as
/usr/lib/libstand.a.
A new 64-bit libstand consumer will arrive in the near future, so move
the bootloader-specific 32-bit version to sys/boot/libstand32/.
Explicitly link against this version in the 32-bit loaders.
Sponsored by: The FreeBSD Foundation
hw.cxgbe.rsrv_noflow. When set, queue 0 of the port is reserved for
TX packets without a flowid. The hash value of packets with a flowid
is bumped up by 1. The intent is to provide a private queue for
link-level packets like LACP that is unlikely to overflow or suffer
deep queue latency.
Reviewed by: np
Obtained from: Netflix
MFC after: 3 days
Useful for so-called USB tethering.
- Imported code from OpenBSD
- Adapted code to FreeBSD
- Removed some unused functions
- Fixed some buffer encoding and decoding issues
- Optimised data transport path a bit, by sending multiple packets at a time
- Increased receive buffer to 16K
Obtained from: OpenBSD
Requested by: eadler @
MFC after: 2 weeks
9341-4i controller was to ensure that scatter/gather lists are ended with
an end-of-list marker. Both the mrsas and Linux megaraid_sas drivers use
this marker with Invader cards as well, so we do the same thing, though
it is apparently not strictly necessary.
Reviewed by: ambrisko
Tested by: ambrisko (Invader card)
MFC after: 3 weeks
Sponsored by: Sandvine Inc.
driver as version 8.037.00 for RTL8168{E-VL,EP,F,G,GU} and RTL8111B. This
makes reception of packets work with the RTL8168G (HW rev. 0x4c000000) in
my Shuttle DS47.
- Consistently use RL_MSI_MESSAGES.
In joint forces with: yongari
MFC after: 5 days
are mostly useful for debugging.
- hw.pci.clear_bars ignores all firmware-assigned ranges for BARs when
set.
- hw.pci.clear_pcib ignores all firmware-assigned ranges for PCI-PCI
bridge I/O windows when set.
MFC after: 1 week
Hetzel <swhetzel@gmail.com> on the -doc mailing list.
Also modify the Author section to be clear that I wrote the man page,
not gptboot.
MFC after: 3 days
Delaying isp_reqodx update, we should be ready to update it every time
we read it. Otherwise requests using several indexes may be requeued
ndefinitely without ever updating the variable.
MFC after: 3 days
a sub-node of nexus (ofwbus) rather than direct attach under nexus. This
fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier.
SPARC is unchanged.
Reviewed by: imp, ian
- Similar to the hack for bootinfo32.c in userboot, define
_MACHINE_ELF_WANT_32BIT in the load_elf32 file handlers in userboot.
This allows userboot to load 32-bit kernels and modules.
- Copy the SMAP generation code out of bootinfo64.c and into its own
file so it can be shared with bootinfo32.c to pass an SMAP to the i386
kernel.
- Use uint32_t instead of u_long when aligning module metadata in
bootinfo32.c in userboot, as otherwise the metadata used 64-bit
alignment which corrupted the layout.
- Populate the basemem and extmem members of the bootinfo struct passed
to 32-bit kernels.
- Fix the 32-bit stack in userboot to start at the top of the stack
instead of the bottom so that there is room to grow before the
kernel switches to its own stack.
- Push a fake return address onto the 32-bit stack in addition to the
arguments normally passed to exec() in the loader. This return
address is needed to convince recover_bootinfo() in the 32-bit
locore code that it is being invoked from a "new" boot block.
- Add a routine to libvmmapi to setup a 32-bit flat mode register state
including a GDT and TSS that is able to start the i386 kernel and
update bhyveload to use it when booting an i386 kernel.
- Use the guest register state to determine the CPU's current instruction
mode (32-bit vs 64-bit) and paging mode (flat, 32-bit, PAE, or long
mode) in the instruction emulation code. Update the gla2gpa() routine
used when fetching instructions to handle flat mode, 32-bit paging, and
PAE paging in addition to long mode paging. Don't look for a REX
prefix when the CPU is in 32-bit mode, and use the detected mode to
enable the existing 32-bit mode code when decoding the mod r/m byte.
Reviewed by: grehan, neel
MFC after: 1 month
allow mrsas(4) from LSI to attach to newer LSI cards that are support by
mrsas(4). If mrsas(4) is not loaded into the system at boot then mfi(4)
will always attach. If a modified mrsas(4) is loaded in the system. That
modification is return "-30" in it's probe since that is between
BUS_PROBE_DEFAULT and BUS_PROBE_LOW_PRIORITY.
This option is controller by a new probe flag "MFI_FLAGS_MRSAS" in mfi_ident
that denotes cards that should work with mrsas(4). New entries that should
have this option.
This is the first step to get mrsas(4) checked into FreeBSD and to avoid
collision with people that use mrsas(4) from LSI. Since mfi(4) takes
priority, then mrsas(4) users need to rebuild GENERIC. Using the
.disabled="1" method doesn't work since that blocks attaching and the
probe gave it to mfi(4).
Discussed with: LSI (Kashyap Desai)
Prior to this change the cached value of 'pm_eptgen' was tracked per-vcpu
and per-hostcpu. In the degenerate case where 'N' vcpus were sharing
a single hostcpu this could result in 'N - 1' unnecessary TLB invalidations.
Since an 'invept' invalidates mappings for all VPIDs the first 'invept'
is sufficient.
Fix this by moving the 'eptgen[MAXCPU]' array from 'vmxctx' to 'struct vmx'.
If it is known that an 'invept' is going to be done before entering the
guest then it is safe to skip the 'invvpid'. The stat VPU_INVVPID_SAVED
counts the number of 'invvpid' invalidations that were avoided because
they were subsumed by an 'invept'.
Discussed with: grehan
the output buffer wasn't being cleared between the inflate() calls,
producing zeroed output after the first inflate() call.
This fixes the read of mkuzip(8) images with geom_uncompress(4).
Reviewed by: ray
Approved by: adrian (mentor)
the old way was to store pcpu in a register, and get curthread from pcpu,
which is not very atomic, and led to issues if the thread was migrated
to another core between the time we got the pcpu address and the time we
got curthread.
Instead, we now store curthread where pcpu used to be store, and we
calculate the pcpu address based on the cpu id.
map a fraction of the pages that were fetched by vm_pager_get_pages() from
secondary storage. Now, we map them all in order to avoid future soft
faults. This effect is most evident when a memory-mapped file is accessed
sequentially. Previously, there were 6 soft faults for every hard fault.
Now, these soft faults are eliminated.
Sponsored by: EMC / Isilon Storage Division
to check the status property in their probe routines.
Simplebus used to only instantiate its children whose status="okay"
but that was improper behavior, fixed in r261352. Now that it doesn't
check anymore and probes all its children; the children all have to
do the check because really only the children know how to properly
interpret their status property strings.
Right now all existing drivers only understand "okay" versus something-
that's-not-okay, so they all use the new ofw_bus_status_okay() helper.
process "status" properties of OF nodes.
I've avoided adding new KOBJ methods here so that we don't have to modify
every ofw_bus in the tree. Since 100% of implementations of ofw_bus use
only ofw_bus_gen_*(), it might be worth garbage-collecting the other
methods as well.
The sglist segment array has grown to a bit over 512 bytes (on
64-bit system) which is more than ideally should be put on the
stack. Instead allocate an appropriately sized sglist and hang
it off each Rx/Tx queue structure.
Bump the maximum number of Tx segments to 64 to make it unlikely
we'll have defragment an mbuf chain. Our previous count was
rounded up to this value since it is the next power of two, so
effective memory usage should not change.
Also only allocate the maximum number of Tx segments if TSO was
negotiated.
It turns out the version of gas we're using interprets the old '_all' mask
as 'fc' instead of 'fsxc'. That is, "all" doesn't really mean "all".
This was the cause of the "wrong-endian register restore" bug that's
been causing problems with some cortex-a9 chips. The 'endian' bit in the
spsr register would never get changed (it falls into the 'x' mask group)
and the first return-from-exception would fail if the chip had powered on
with garbage in the spsr register that included the big-endian bit. It's
unknown why this affected only certain cortex-a9 chips.
CAPABILITIES stuff required to make ssh work.
Hopefully, Book-E can eventually be added to GENERIC, which would avoid
this kind of issue with bitrot. That will require figuring out how to link
Book-E and AIM kernels at the same address, however...
get the Routerboard 800 up and running with the vendor device tree. This
does not implement some BERI-specific features (which hopefully won't be
necessary soon), so move the old code to mips/beri, with a higher attach
priority when built, until MIPS interrupt domain support is rearranged.
strings and include arbitrary information (IRQ line/domain/sense). When the
ofw_bus_map_intr() API was introduced, it assumed that, as on most systems,
these were either 1 cell, containing an interrupt line, or 2, containing
a line number plus a sense code. It turns out a non-negligible number of
ARM systems use 3 (or even 4!) cells for interrupts, so make this more
general.
This also fixes asserts on removal of the module for the mpc74xx.
The PowerPC 970 processors have two different types of events: direct events
and indirect events. Thus far only direct events are supported. I included
some documentation in the driver on how indirect events work, but support is
for the future.
MFC after: 1 month
r261266:
Add a jail parameter, allow.kmem, which lets jailed processes access
/dev/kmem and related devices (i.e. grants PRIV_IO and PRIV_KMEM_WRITE).
This in conjunction with changing the drm driver's permission check from
PRIV_DRIVER to PRIV_KMEM_WRITE will allow a jailed Xorg server.
devices. This is a nop, except for what's reported by atmelbus for the
resources.
It would be nice if we could dymanically allocated these things, but
the pmap_mapdev panics if we don't keep the static mappings, so we
still need to play the carefully allocate VA space between all
supported SoC game.
User's with their own devices may need to make adjustments.
the virtio backends.
- Add a new ioctl to export the count of pins on the I/O APIC from vmm
to the hypervisor.
- Use pins on the I/O APIC >= 16 for PCI interrupts leaving 0-15 for
ISA interrupts.
- Populate the MP Table with I/O interrupt entries for any PCI INTx
interrupts.
- Create a _PRT table under the PCI root bridge in ACPI to route any
PCI INTx interrupts appropriately.
- Track which INTx interrupts are in use per-slot so that functions
that share a slot attempt to distribute their INTx interrupts across
the four available pins.
- Implicitly mask INTx interrupts if either MSI or MSI-X is enabled
and when the INTx DIS bit is set in a function's PCI command register.
Either assert or deassert the associated I/O APIC pin when the
state of one of those conditions changes.
- Add INTx support to the virtio backends.
- Always advertise the MSI capability in the virtio backends.
Submitted by: neel (7)
Reviewed by: neel
MFC after: 2 weeks
/dev/kmem and related devices (i.e. grants PRIV_IO and PRIV_KMEM_WRITE).
This in conjunction with changing the drm driver's permission check from
PRIV_DRIVER to PRIV_KMEM_WRITE will allow a jailed Xorg server.
Submitted by: netchild
MFC after: 1 week
- Use system provided functions for HID report requests.
- Nice the mode setting, because the USB hardware does appear to
handle the commands right away.
MFC after: 1 week
swcr_newsession can change the pointer for swcr_sessions which races with
swcr_process which is looking up entries in this array.
Add a rwlock that protects changes to the array pointer so that
swcr_newsession and swcr_process no longer race.
Original patch by: Steve O'Hara-Smith <Steve.OHaraSmith@isilon.com>
Reviewed by: jmg
Sponsored by: EMC / Isilon Storage Division
By definition, the very first FIN is not a duplicate. Process it normally
and don't feed it to congestion control as though it were a dupe. Don't
prevent CC from seeing later dupe acks while in a half close state.
the memory ranges that they decode for downstream devices rather than
creating ResourceProducer range resource entries. The result is that
we allocate the full range to the PCI root bridge device causing
allocations in child devices to all fail.
As a workaround, ignore any standard memory resources on a PCI root
bridge device. It is normal for a PCI root bridge to allocate an I/O
resource for the I/O ports used for PCI config access, but I have not
seen any PCI root bridges that legitimately allocate a memory resource.
Reviewed by: jkim
MFC after: 1 week
the INP_INFO lock from tcp_usr_accept. As the PR/patch states
this was following the advice already in the code.
See the PR below for a full disucssion of this change and its
measured effects.
PR: 183659
Submitted by: Julian Charbon
Reviewed by: jhb
The ext4 inode flags do not have equivalents for chflags (1)
and hold information that is private to the implementation.
The i_flag field in the inode is a better place to hold the Ext4
inode flags as it saves us from masking flags while setting or
getting attributes. It should also make things cleaner if we
implement write support for Ext4.
Suggested by: bde
Tested by: Mike Ma
MFC after: 3 days
that all pressed keys are released before completing the USB keyboard
detach. This will prevent so-called "ghost-keys" from appearing after
that the USB device generating the key event(s) has been detached.
MFC after: 1 week
It's common for multi-threaded processes to create a thread for
the purpose of synchronously processing signals. Allow such processes to
utilize a capabilities sandbox.
Discussed with: rwatson, pjd
MFC after: 2 weeks
when activating an I/O or memory window on the CardBus bridge.
Tested by: Olivier Cochard-Labbe <olivier@cochard.me>
Reviewed by: imp
MFC after: 3 days
Note that this commit hasn't been compile tested because these files
are not hooked up to the build...
PR: 186129
Submitted by: Takanori Sawada
Approved by: rpaulo
The VMCS field EOI_bitmap[] is an array of 256 bits - one for each vector.
If a bit is set to '1' in the EOI_bitmap[] then the processor will trigger
an EOI-induced VM-exit when it is doing EOI virtualization.
The EOI-induced VM-exit results in the EOI being forwarded to the vioapic
so that level triggered interrupts can be properly handled.
Tested by: Anish Gupta (akgupt3@gmail.com)
The IN_* flags should be set in i_flag instead of corrupting
i_flags [1].
Re-enable HTree dirindex as the last series of bug fixes
seems to have fixed the issues.
Reported by: bde [1]
Tested by: kevlo
MFC after: 1 week
macro was changed. Since copying 64-bit srr1 into 32-bit srr1 drops the upper
32 bits, any bits set in the context were dropped, meaning the context check
fails. Since 32-bit set_context can't change those bits anyway, copy the ones
from the current context (td->td_frame) before calling set_context().
MFC after: 3 weeks
geom_alloc_copyin() can't return ENOMEM, so describe its fail as bad
control request. Add check for NULL pointer in gctl_dump(), since it
can be NULL when geom_alloc_copyin() failed.
MFC after: 1 week
Add to the gctl_error() an ability to specify error description even
if numeric error code is already specified. Also by default set
error code to EINVAL.
PR: 185852
MFC after: 1 week
injected into the vcpu but the VM-entry interruption information field
already has the valid bit set.
Pointed out by: David Reed (david.reed@tidalscale.com)
The latest draft of SBC-3 tells: "A MAXIMUM UNMAP LBA COUNT field set to
a non-zero value indicates the maximum number of LBAs that may be unmapped
by an UNMAP command." To me it does not sound like that limit is set per
single descriptor, but rather per all command. And I have at least one
device that behaves exactly that way. This patch fixes the problem there.
MFC after: 1 week
Make comments match parameters
Add options for early printf so we get regression build testing on it.
Add preview of options for FDT support coming soon (I hope)
paper trail now, this patch is similar to one posted for one of the
preliminary versions of a new armv6 port. I took them and made them
more generic. Option not enabled by default since each board/port has
to provide its own eputc, and possibly do other things as well...
Use the bitwise negation instead of bogus boolean negation and move
the flag manipulation with the assignment.
Fix some grammatical errors introduced in the same change.
Reported by: bde
MFC after: 3 days
pim_input() properly.
While here, remove extra variable and incorrect condition
before m_pullup().
Reported by: Olivier Cochard-Labbé <olivier cochard.me>
Sponsored by: Nginx, Inc.
a timeout value of a single tick is given. With FreeBSD-10 and newer
the current system time is used as a starting point, and the minimum
callout time of a single tick will be guaranteed. This patch mostly
affect the DMA delay timeouts, which are typically in the range from
0.125 to 2ms.
MFC after: 1 week
via a software interrupt.
This is safe to do because the logical processor is already cognizant of the
NMI and further NMIs are blocked until the host's NMI handler executes "iret".
r260545 cleared the inode flags to fix corruption problems but
we still need to pass some EXT4 flags for the ext4 read-only
mode. None of these attributes has an equivalent in FreeBSD and
are uninteresting for the system utilities so they should be
innaccessible in ext2_getattrib().
Note: we also use EXT4_HUGE_FILE but we use it directly from the
dinode structure so it is not necessary to translate it,
Suggested by: bde
MFC after: 3 days
