mbpool existed to support NICs with memory interfaces and all remaining
comsumers were removed earlier this year with NATM.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10513
Back out the unification commit to boot1. There's some issues on the
arm and arm64 platforms that need to be addressed with code
changes. There's also a discussion on arch@ about the future of
boot1.efi vs just using loader.efi that needs to play out. So take a
pause on these changes until the arm issues can be fixed and it's
clear boot1.efi will survive into FreeBSD 12.
OK'd by: Eric@meatspace
Ensure that we are called with two arguments, and that the output file
is writable. Also, if we cannot find the mfs section report the output
file name rather than "kernel", as this script may be used with other
than kernels.
Sponsored by: The FreeBSD Foundation
r324539 gathered some vnet decls into netinet/tcp_var.h, so that they
are now redundant in dev/cxgbe/tom/{t4_cpl_io.c,t4_ddp.c}. This triggers
gcc -Wredundant-decls.
Reviewed by: np
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12674
MNT_VNODE_FOREACH_ALL() is supposed to avoid returning doomed vnodes,
but the VI_DOOMED check it used was done without the vnode interlock
held, so it could race with a concurrent vgone().
Submitted by: Don Morris <don.morris@isilon.com>
Reviewed by: kib, mckusick
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12704
We don't normally provide special handling for optionally-included src
files, but md.o depends on both md.c and the value of ${MD_IMAGE_SIZE}.
Previously if one built with MD_IMAGE_SIZE, executed "make clean", and
then built with a different MD_IMAGE_SIZE md.o would not be rebuilt.
Reported by: Zakary Nafziger
Sponsored by: The FreeBSD Foundation
CAM_REQ_ABORTED sounds natural for aborting outstanding requests when
tearing down a session, but that status actually causes eligible
requests to be tried again. That's completely useless, so let's use
CAM_DEV_NOT_THERE instead. Perhaps there is a better status, but this
should be good enough. The change should affect only the session
termination.
Tested by: Ben RUBSON <ben.rubson@gmail.com>
Reviewed by: mav, trasz
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12653
It should be sufficient to hold the lock just for removing the session
from the session list. Everything else should be covered by the session
specific lock.
On top of that, at present we can get a deadlock caused by waiting on
the CAM SIM reference count while holding the global lock. A specific
scenario involving ZFS is this:
- concurrent termination of two sessions, S1 and S2
- session S1 completed all I/Os and sleeps in CAM waiting for device
close by ZFS;
- session S2 is also dead now, but can not forcefully complete
outstanding requests by calling iscsi_session_cleanup() from
iscsi_maintenance_thread_terminate(), since it can't get the same
global sc_lock;
- as soon as there are unfinished requests, ZFS can not do
spa_config_enter() as writer, and so can not close the device for
session S1;
- deadlock.
Reported by: Ben RUBSON <ben.rubson@gmail.com>
Tested by: Ben RUBSON <ben.rubson@gmail.com>
Reviewed by: mav, trasz
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12652
This is a NFC patch to move around the Search:memory implementation so
that it doesn't exceed the standard column width and doesn't take so
much vertical space in gdb_trap.
Submitted by: Daniel O'Connor <darius@dons.net.au>
Reviewed by: cem, jhb
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12684
When the NFSv4.1 pNFS client is using a Flexible File Layout specifying
mirrored Data Servers, it must do the writes and commits to all mirrors.
This patch modifies the client to use a taskqueue to perform these writes
and commits concurrently.
The number of threads can't be changed for taskqueue(9), so it is set
to 4 * mp_ncpus by default, but this can be overridden by setting the
sysctl vfs.nfs.pnfsiothreads.
Differential Revision: https://reviews.freebsd.org/D12632
- Fix it by replacing m_cat() with m_prev->m_next = m_new
(m_cat() will try to append data - as a result, there will be no
fragmentation).
- Move some constants out of the loop.
Was previously tested with D4077.
Differential Revision: https://reviews.freebsd.org/D4090
Allocate smallest unit number from pool via ifc_alloc_unit_next()
and exact unit number (if available) via ifc_alloc_unit_specific().
While here, address possible deadlock (mentioned in PR).
PR: 217401
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D12551
The stop drops process lock, which allows the signal mask to be
changed and our selected signal might become blocked, i.e. should be
returned to the process queue instead of delivery.
Also, for the existing check of the process no longer having an
attached debugger, we should not loose the signal, but requeue it.
Reported and tested by: bdrewery
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Split two conditions into separate asserts. Print additional details,
like the signal number and action value.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In r324542 I neglected to reset the first and last fields of struct
unrhdr. This causes a tmpfs to fail the unr(9) consistency checks with
DIAGNOSTIC on. Fix this by resetting the fields by calling init_unrhdr.
While here, change a loop to use TAILQ_FOREACH_SAFE since it is more
readable and equally fast.
Reported by: David Wolfskill <david@catwhisker.org>
Approved by: rstone (mentor)
Sponsored by: Dell EMC Isilon
For processing, reclaim_pv_chunk() removes the pv_chunk from the lru
list, which makes pc_lru linkage invalid. Then the pmap lock is
released, which allows for other thread to free the last pv entry
allocated from the chunk and call free_pv_chunk(), which tries to
modify the invalid linkage.
Similarly, the chunk is inserted into the private tailq new_tail
temporary. Again, free_pv_chunk() might be run and corrupt the
linkage for the new_tail after the pmap lock is dropped.
This is a consequence of r299788 elimination of pvh_global_lock, which
allowed for reclaim to run in parallel with other pmap calls which
free pv chunks.
As a fix, do not remove the chunk from pc_lru queue, use a marker to
remember the position in the queue iteration. We can safely operate
on the chunks after the chunk's pmap is locked, we fetched the chunk
after the marker, and we checked that chunk pmap is same as we have
locked, because chunk removal from pc_lru requires both pv_chunk_mutex
and the pmap mutex owned.
Note that the fix lost an optimization which was present in the
previous algorithm. Namely, new_tail requeueing rotated the pv chunks
list so that reclaim didn't scan the same pv chunks that couldn't be
freed (because they contained a wired and/or superpage mapping) on
every invocation. An additional change is planned which would improve
this.
Reported and tested by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Makefile.inc has a specific meaning in the tree, and
common/Makefile.inc doesn't quite fit into that. Rename it to
loader.mk and it will be a place to collect common things to all
/boot/loader programs there.
Sponsored by: Netflix
Refactor boot1 to use the same I/O code as /boot/loader uses. Refactor
to use the common efi_main.c.
Submitted by: Eric McCorkle
Differential Revision: https://reviews.freebsd.org/D10447
allocations (for req and ccb, which ultimately contain the
nvme_cmd). As such, we can micro-optimize these routines. Add a
comment to this effect, and bzero the ccb used to make the requests
for the nda dump rotuine so it more closely matches a ccb allocated
with xpt_get_ccb().
Sponsored by: Netflix
The client IP address was not being reported for some NFSv4 mounts by
nfsdumpstate. Upon investigation, two problems were found for mounts
using IPv4. One was that the code (originally written and tested on i386)
assumed that a "u_long" was a "uint32_t" and would exactly store an
IPv4 host address. Not correct for 64bit arches.
Also, for NFSv4.1 mounts, the field was not being filled in. This was
basically correct, because NFSv4.1 does not use a callback address.
However, it meant that nfsdumpstate could not report the client IP addr.
This patch should fix both of these issues.
For IPv6, the address will still not be reported. The original NFSv4 RFC
only specified IPv4 callback addresses. I think this has changed and, if so,
a future commit to fix reporting of IPv6 addresses will be needed.
Reported by: manu
PR: 223036
MFC after: 2 weeks
Ensure that the current behaviour is consistent: stop processing
of the chunk, but finish the processing of the previous chunks.
This behaviour might be changed in a later commit to ABORT the
assoication due to a protocol violation, but changing this
is a separate issue.
MFC after: 3 days
Create a config file for PCI devices that exposes their configuration
space. Only fields needed by libdrm are filled in (vendor, device,
revision, subvendor and subdevice).
Link /sys/class/drm/card%d/device to the PCI device directory.
/compat/linux/path before /path. Stop following symbolic links when
looking up /compat/linux/path so dead symbolic links aren't ignored.
This allows syscalls like readlink(2) and lstat(2) to work on such links.
And open(2) will return an error now instead of trying /path.
more general and doesn't try to access registers that may be undefined
when the card is in MSIX mode.
This change, along with r324630, r324631, r324632, makes nda crash
dumps work again. Previously, they only worked on CPU 0 when the stack
garbage was just so.
Sponsored by: Netflix
Suggested by: scottl@ (who provided earlier version of the patch)
acidentally sending bogus values in these fields, which some drives
may reject with an error or worse (undefined behavior).
This is especially needed for the ndadump routine which allocates the
cmd from stack garbage....
Sponsored by: Netflix
There should be no functional changes.
Reviewed by: hselasky
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12670
Follow up from r324201 to fix compilation with gcc, which complains
about non-ICE case expressions.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D12675
The variable is modified with the highly contended page free queue lock.
It unnecessarily shares a cacheline with purely read-only fields and is
re-read after the lock is dropped in the page allocation code making the
hold time longer.
Pad the variable just like the others and store the value as found with
the lock held instead of re-reading.
Provides a modest 1%-ish speed up in concurrent page faults.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D12665
The value is spread all over the kernel and zeroing a register is
cheaper/shorter than setting it up to an arbitrary value.
Reduces amd64 GENERIC-NODEBUG .text size by 0.4%.
MFC after: 1 week
After some in-progress work is committed, this would otherwise be the only
instance of #if(n)def NO_SWAPPING in the tree. Moreover, the requisite
opt_vm.h include was missing, so the PHOLD/PRELE calls were always being
compiled in anyway.
MFC after: 1 week
"optimization". First, sendfile(..., SF_NOCACHE) frees pages without
checking whether those pages are mapped. This can leave the system
with mappings to free or repurposed pages. Second, a page can be
busied between the time of the current busy test and acquiring the
object lock. Essentially, the test performed before the object lock
is acquired can only be regarded as an optimization to short-circuit
further work on the page. It cannot, however, be relied upon to prove
that it is safe to free the page. Third, when sendfile(..., SF_NOCACHE)
was originally implemented, vm_page_deactivate_noreuse() did not yet
exist. Use vm_page_deactivate_noreuse() instead of vm_page_deactivate(),
because it comes closer to freeing the page.
In collaboration with: glebius
Discussed with: gallatin, kib, markj
X-MFC after: r324448
then td->td_sel is NULL and this will result in a segfault inside selrecord().
This happens when only using kqueue() to poll for read and write events.
If select() and kqueue() is mixed there won't be a segfault.
Reported by: Johannes Lundberg
MFC after: 1 week
Sponsored by: Mellanox Technologies
To properly handle 'fwd tablearg,port' opcode, copy sin_port value from
sockaddr_in structure stored in the opcode into corresponding hopstore
field.
PR: 222953
MFC after: 1 week
The manipulations done by mountcheckdirs() are not that useful during
the unmount, they can bring about unexpected security consequences.
Thic change effectively reverts the change in r73241.
The change also allows to simplify the handling of rootvnode global
variable.
Discussed with: mckusick, mjg, kib
Reviewed by: trasz
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12366
As part of ath10k and other chipset support, the EDCA stuff has to be moved
to potentially be per-VAP. For hardware that doesn't support it (ie,
everything that we currently support) it can just fetch the "current"
global EDCA parameters for the NIC.
This is one of those parameters that is linked to the currently active
channel context / VAP in Linux mac80211 parlance.
Tested:
* ath(4), STA and AP modes
The duplicate detection code currently expects A-MSDU frames to be encaped -
they're decap'ed /after/ duplicate detection.
However for ath10k (and iwm hardware later on) the firmware supports
doing A-MSDU decap in hardware - which shows up as multiple frames with
the same sequence number and IV.
This is the first part of decap handling - if we see a stretch of A-MSDU
frames from the driver with the MORE bit set, then don't treat them
as duplicates.
This isn't 100% complete as crypto sequence number handling and "A-MSDU in
A-MPDU" needs handling, but it's a start.
This should be a glorified no-op for everyone. Please tell me if it isn't.
It doesn't seems to be needed anymore and this make ehci working again
on the Pine64.
Thanks to jmcneill@ for the help.
Tested on: Pine64 (A64), OrangePi One (H3), BananapiM2 (A31s)
posix_fallocate is logically equivalent to writing zero blocks to the
desired file size and there is no reason to prevent calling it in
capability mode. posix_fallocate already checked for the CAP_WRITE
right, so we merely need to list it in capabilities.conf.
Reviewed by: allanjude
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12640
Define a prototype for exit in stand.h. Provide a reference to exit in
a few conf.c files to ensure that its definition gets pulled in early.
Since exit() is a MD routine, it isn't defined in libsa. However,
libsa tends to be listed last and will soon have panic() in it which
calls exit(). The reference to exit early ensures that the MD exit is
available to satisfy linking for static libraries.
Rename exit to efi_exit. It doesn't have the proper signature and
conflicts with standard definition. Provide the standard definition as
well.
Sponsored by: Netflix
Move ufsread.c from sys/boot/common (which used to be all the common
files for /boot/loader, but grew to be all the common files for
sys/boot, but that's now sys/boot/libsa's job) to sys/boot/libsa.
Sponsored by: Netflix
With that gone they need to go into GENERIC now.
Makes FreeBSD/arm usable on gem5 by default.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D12566
tmpfs uses unr(9) to allocate inodes. Previously when unmounting it
would individually free the units when it freed each vnode. This is
unnecessary as we can use the newly-added unrhdr_clear function to clear
out the unr in onde go. This measurably reduces the time to unmount a
tmpfs with many files.
Reviewed by: cem, lidl
Approved by: rstone (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12591
Previously before you could call unrhdr_delete you needed to
individually free every allocated unit. It is useful to be able to tear
down the unr without having to go through this process, as it is
significantly faster than freeing the individual units.
Reviewed by: cem, lidl
Approved by: rstone (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12591
can use them. Gather all TCP tunables in tcp_var.h in one place and
alphabetically sort them, to ease maintainance of the list.
Don't copy and paste declarations in tcp_stacks/fastpath.c.
jhibbits@ points out that left shifting bits 8-11 24 bits won't fit in a 32-bit
integer either.
Corrects r324533.
Submitted by: jhibbits
Sponsored by: Dell EMC Isilon
Ordinary input to this macro comes from pe_code, which is uint16_t. Coverity
points out that shifting such a value discards the result of a 24 bit shift,
which is not what we want.
A follow-up to r324291.
CID: 1381676
Sponsored by: Dell EMC Isilon
all cache the last system time (uptime + boottime). Only the format
differs. Do not re-calculate the bintime and simply use the value
used to calculate the microtime and nanotime.
Group all the updates under the relevant comment. Remove obsoleted
XXX part.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de>
MFC after: 1 week
Mirror the change made for powerpc64 in r323687. With this
change, gcc 6.4.0 can successfully compile and link a kernel
that runs on sparc64.
MFC after: 2 weeks
Sendfile() should match the error checking order of send() which
is currently:
SBS_CANTSENDMORE
so_error
SS_ISCONNECTED
Submitted by: Jason Eggleston <jason@eggnet.com>
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12633
When a "pnfs" NFSv4.1 mount is hung because of an unresponsive DS,
a forced dismount wouldn't work, because the RPC socket for the DS
was not being closed. This patch fixes this.
This will only affect "pnfs" mounts where the pNFS server's DS
is unresponsive (crashed or network partitioned or...).
Found during testing of the pNFS server.
MFC after: 2 weeks
Add sanity checks in ql_hw_send() qla_send() to ensure that empty slots
in Tx Ring map to empty slot in Tx_buf array before Transmits. If the
checks fail further Transmission on that Tx Ring is prevented.
From ACPICA 20170929, AcpiOsGetTimer() should be available early because
While() loop timeout mechanism was reimplemented with it. Unfortunately,
it means AcpiLoadTables() may cause panic when a While() loop is executed.
After having lengthy discussions with ACPICA developers, I have concluded
that dummy timecounter is good enough for the purpose and it is the least
intrusive solution for now. Also, they reminded me the ACPI specification
implies OS timer function should be available before loading tables.
this is more friendly to the tree.
Tested this with loader.conf:if_igb_load="YES" and it does the right
thing.
Submitted by: Ian Lepore <ian@freebsd.org>
mapping. This uses the new common code shared with amd64.
The RTC should only be accessed via EFI. There is no locking around it as
the spec only has this as a requirement for the PC-AT CMOS device.
Reviewed by: kib, imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12595
Background:
- UDP 4-tuple hash type is unconditionally enabled in Hyper-V on WS2016,
which is _not_ affected by NDIS_OBJTYPE_RSS_PARAMS.
- Non-fragment UDP/IPv4 datagrams' hash type is delivered to VM as
TCP_IPV4.
Currently this erroneous behavior only applies to WS2016/Windows10.
Force l3/l4 protocol check, if the RXed packet's hash type is TCP_IPV4,
and the Hyper-V is running on WS2016/Windows10. If the RXed packet is
UDP datagram, adjust mbuf hash type to UDP_IPV4.
MFC after: 3 days
Sponsored by: Microsoft
Event tasks are pinned to their respective CPU by default, in the same
fashion as they were.
Unpin the event tasks by setting hw.vmbus.pin_evttask to 0, if certain
CPUs serve special purpose.
MFC after: 3 days
Sponsored by: Microsoft
always include it. Remove places where we explicitly include it. This
also helps reduce the 'cut-and-paste' factor of these Makefiles.
Sponsored by: Netflix
Build libstand from inside the sys/boot build. Redirect all users in
sys/boot to grab it from there. We still build it as libstand.a for
the moment. When lib/libstand is moved here, we'll change the name.
Sponsored by: Netflix
LIBSA is the current stand alone library. LIBSA32 is the 32-bit
version of the library. LIBSAU is the userboot version of libsa. Use
the proper define instead of the more generic define.
Sponsored by: Netflix
Define SASRC to point to the current libstand sources. Include
../Makefile.inc early enough in a few places so we can .include
"${SASRC}/Makefile" and have it work. Create a new pass-up
Makefile.inc in sys/boot/userboot to allow this pattern to work.
Sponsored by: Netflix
o Fall back to default m_ext free mech, using function pointer in
m_ext_free, and remove sf_ext_free() called directly from mbuf code.
Testing on modern CPUs showed no regression.
o Provide internally used flag EXT_FLAG_SYNC, to mark that I/O uses
SF_SYNC flag. Lack of the flag allows us not to dereference
ext_arg2, saving from a cache line miss.
o Create function sendfile_free_page() that later will be used, for
multi-page mbufs. For now compiler will inline it into
sendfile_free_mext().
In collaboration with: gallatin
Differential Revision: https://reviews.freebsd.org/D12615
in mb_free_ext() always use fields from the original refcount holding
mbuf (see. r296242) mbuf. Cuts another cache miss from mb_free_ext().
However, treat EXT_EXTREF mbufs differently, since they are different -
they don't have a refcount holding mbuf.
Provide longer comments in m_ext declaration to explain this change
and change from r296242.
In collaboration with: gallatin
Differential Revision: https://reviews.freebsd.org/D12615
All of these arguments are stored in m_ext, so there is no reason
to pass them in the argument list. Not all functions need the second
argument, some don't even need the first one. The second argument
lives in next cache line, so not dereferencing it is a performance
gain. This was discovered in sendfile(2), which will be covered by
next commits.
The second goal of this commit is to bring even more flexibility
to m_ext mbufs, allowing to create more fields in m_ext, opaque to
the generic mbuf code, and potentially set and dereferenced by
subsystems.
Reviewed by: gallatin, kbowling
Differential Revision: https://reviews.freebsd.org/D12615
properly dump all the sendqueues and not just the first one
History:
It appears that in the commit which introduced the code,
r165272, the array indexes of "sq_blocked[0]" and "td_name[i]"
were interchanged. In r180927 "td_name[i]" was corrected to
"td_name[0]", but "sq_blocked[0]" was left unchanged.
PR: 222624
Discussed with: kmacy @
MFC after: 1 week
Sponsored by: Mellanox Technologies
appearing only where the code explicitly set it, but since much of the
data was not initialized, '-1' appeared other places too, and led to
panics. Clear the allocated data before initializing nonzero values by
allocating with M_ZERO.
Submitted by: Doug Moore <dougm@rice.edu>
Reported by: Oleg V. Nauman <oleg@theweb.org.ua>, cy
Tested by: Oleg V. Nauman <oleg@theweb.org.ua>
MFC after: 1 week
X-MFC with: r324420
Differential Revision: https://reviews.freebsd.org/D12627
allocated, when requested range of descriptors does not fit into
currently allocated LDT, or trim the return if the range fits
partially. Before, the function returned EINVAL.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
descriptors does not fit into currently allocated LDT, or trim the
return if the range fits partially. Before, the function returned
EINVAL.
Fix two bugs in r324366: use capped num counter for malloc size, and
do not leak allocated buffer on EINVAL (by handling EINVAL case as
normal, see above).
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Remove mtx_owned() checks from set_user_ldt(). Split the function
into _locked() version which requires the dt_lock spinlock owned, and
make set_user_ldt() a wrapper. Add a comment in swtch.s noting that
the call to the new set_user_ldt() cannot recurse on dt_lock.
Remove #ifdef SMP block, the addend is always zero on UP.
Fix type of set_user_ldt_rv(), making it match the type used for
smb_rendezvous() callback, and remove the cast. Use curproc.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The values from the old address space do not make sense for the new
program. In particular, gsbase might be the TLS base for the old
program but the new program has no TLS now.
amd64 already handles this correctly.
Reported and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
nodes to allocate for the blist, and to initialize them. The computation
can be done much more quickly by identifying the terminating node, if any,
at every level of the tree and then summing the number of nodes at each
level that precedes the topmost terminator. The initialization can also be
done quickly, since settings at the root mark the tree as all-allocated, and
only a few terminator nodes need to be marked in the rest of the tree.
Eliminate blst_radix_init, and perform its two functions more simply in
blist_create.
The allocation of the blist takes places in two pieces, but there's no good
reason to do so, when a single allocation is sufficient, and simpler.
Allocate the blist struct, and the array of nodes associated with it, with a
single allocation.
Submitted by: Doug Moore <dougm@rice.edu>
Reviewed by: markj (an earlier version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11968
attachment of i2c devices needed by hdmi.
The hdmi init also uses an intrhook callback to defer initialization, and if
the hdmi callback runs first, the i2c devices will not yet have registered
their device_t in association with their FDT phandle, which allows cross-
device references on FDT systems.
Now the hdmi deferred init checks for the i2c device registration, and if
it's not complete yet, it registers as an eventhandler watching for newbus
attach events. When the i2c device eventually attaches, the hdmi driver
unregisters from watching further events, and continues with the hdmi init.
Because the function signatures for an intrhook callback and an event
handler callback are the same, a single function is used for both callbacks.
Reported by: Russell Haley <russ.haley@gmail.com>
The detach case is slightly complicated by the fact that some in-kernel
consumers may want to know before a device detaches (so they can release
related resources, stop using the device, etc), but the detach can fail. So
there are pre- and post-detach notifications for those consumers who need to
handle all cases.
A couple salient comments from the review, they amount to some helpful
documentation about these events, but there's currently no good place for
such documentation...
Note that in the current newbus locking model, DETACH_BEGIN and
DETACH_COMPLETE/FAILED sequence of event handler invocation might interweave
with other attach/detach events arbitrarily. The handlers should be prepared
for such situations.
Also should note that detach may be called after the parent bus knows the
hardware has left the building. In-kernel consumers have to be prepared to
cope with this race.
Differential Revision: https://reviews.freebsd.org/D12557
When the EVENTHANDLER(9) subsystem was created, it was a documented feature
that an eventhandler callback function could safely deregister itself. In
r200652 that feature was inadvertantly broken by adding drain-wait logic to
eventhandler_deregister(), so that it would be safe to unload a module upon
return from deregistering its event handlers.
There are now 145 callers of EVENTHANDLER_DEREGISTER(), and it's likely many
of them are depending on the drain-wait logic that has been in place for 8
years. So instead of creating a separate eventhandler_drain() and adding it
to some or all of those 145 call sites, this creates a separate
eventhandler_drain_nowait() function for the specific purpose of
deregistering a callback from within the running callback.
Differential Revision: https://reviews.freebsd.org/D12561
the page is already wired or queued. Prior to the elimination of PG_CACHED
pages, vm_page_grab() might have returned a valid, previously PG_CACHED
page, in which case enqueueing the page was necessary. Now, that can't
happen. Moreover, activating the page is a dubious choice, since the page
is not being accessed.
Reviewed by: kib
MFC after: 1 week
end up with non-standard DESTDIR information in its symlink. This
can happen very trivially if the release scripts are used.
Sponsored by: Limelight Networks
connection was reset by the remote end, sendfile() would just report
ENOTCONN instead of ECONNRESET.
Submitted by: Jason Eggleston <jason@eggnet.com>
Reviewed by: glebius
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12575
At initialization, hc_source_mask only includes non-Pure sources.
The patch changes source registration to enable the registered source in the
hc_source_mask bitmask. This mask governs which sources are harvested.
This patch also disallows userspace from disabling such sources.
PR: 222807
Submitted by: W. Dean Freeman <badfilemagic AT gmail.com>
Reviewed by: jmg (earlier version), delphij
Approved by: secteam (delphij)
Obtained from: HBSD 0054e3e170e083811acc9f3b637f8be8a86c03e7
Security: yes
Differential Revision: https://reviews.freebsd.org/D12611
Changes since 1.16.26.0 for all three firmwares are listed below. This
list was obtained from the Release Notes of the Chelsio Unified Wire
v3.5.05 release for Linux.
T6 Firmware
++++++++++++
================================================================================
Version : 1.16.63.0
Date : 09/29/2017
================================================================================
Fixes
-----
BASE:
- Fixed a fw crash when configured traffic rate limit is less than 10kbps.
- Fixed traffic rate limiting for smaller traffic rate value.
ETH:
- Fixed 40G link failure when interface is toggled.
- Fixed adapter crash when interface is toggled during traffic.
- Fixed 25G link failure when PEER only supports consortium mode autoneg
for 25G.
- Fixed 100G optics link failure when cable is plugged in after bringing up
the interface.
- Enable RS FEC as default if speed is 100G.
- Fixed DCBX configuration refresh failure.
OFLD
- Fixed 0B iWARP ingress read failure.
- Fixed iWARP SRQ reuse failure.
FOiSCSI:
- Fixed vlan interface ping failure.
- Fixed target discovery failures.
- Fixed mutual chap login failure.
================================================================================
Version : 1.16.59.0
Date : 09/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed fw crash caused by MC parity error in SO adapters.
- Generate Timer0Int interrupt if fw crashes due to unaligned access error. Host
driver must look into PCIE_FW register to see if any fw fatal error has
encountered. If PCIE_FW doesn't indicate any error then driver must ignore this
interrupt.
- Fixed receive buffer threshold settings which was resulting in error frames on
receive side.
ETH:
- Fixed an issue in connection traffic shaping when
FLOWC_WR->FW_FLOWC_MNEM_SCHEDCLASS is not received in first WR on the connection.
- Fixed link failure when speed is changed from 10G-1G-10G due to incorrect flag
check.
- Fixed improper LED behaviour for blink test and when traffic is running.
- Removed storage of previous fec settings from fw. Driver needs to pass the user
settings whenever a new module is plugged in as fw resets these when a module is
unplugged.
OFLD
- OVS offload: TP cache is flushed periodically to get the accuate filters stats
(hit count).
ENHANCEMENTS
------------
BASE:
- Ring backbone feature added. New FW_PARAMS_PARAM_DEV_RING_BACKBONE param type
added to query and enable ring backbone support.
- VNI support added for filtering. New entry_type FW_VI_MAC_TYPE_EXACTMAC_VNI
added to FW_VI_MAC_CMD.
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer group
mapping for the ports.
- FW_PARAMS_PARAM_DEV_TPCHMAP API added to read the port to channel mapping.
- HMA (Host memory access) support added. New FW_HMA_CMD and
FW_PARAMS_PARAM_DEV_HMA_SIZE added to query and configure the HMA. It
enables the memfree support (256 connections) for iwarp.
- PTP support enabled.
ETH:
- Added consortium mode 50G support.
- Added the ability to allow only selected speeds to be advertised during auto
negotiation.
- Increased port capability from 16 to 32 bits to support more speeds.
FW_PARAMS_PARAM_PFVF_PORT_CAPS32 added to query whether fw supports 16 or 32
bit port capability.
OFLD:
- RDMA Write with immediate support added (iwarp 2.0 feature)
- FW_TLS_KEYCTX_TX_WR removed and security key management moved to driver.
- 256 offloaded connections support for iwarp on SO adapters.
iSCSI:
- New param FW_PARAMS_PARAM_DEV_PPOD_EDRAM added for iscsi ppod configuration
in EDRAM (performance improvement).
FOiSCSI:
- iSCSI Command offload target support added.
FOFCoE:
- FCoE support enabled.
================================================================================
Version : 1.16.43.0
Date : 05/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed default DCB mode to AUTO.
- Fixed DCBX bugs when AUTO mode is configured in config file.
- Fixed an issue where even after removing PFC from switch, PFC wasn't getting
reset.
- Fixed DDR3/DDR4 ECC errors.
- Fixed an FLR issue where FLR completion was going to host before FLR
processing is finished in fw.
ETH:
- Fixed bug in writing multi-bytes using i2c interface.
- Fixed the link failure when optical cable is inserted into the QSA module
after loading the driver.
- Fixed false link up when peer interface was brought down.
- Enabling RS FEC by default for 100Gbase-SR4 according to 802.3BJ standard.
- Fixed bugs related to negotiated fec based local/peer fec ability and request.
- Fixed auto-neg failure with few switches.
- T6 Performance improvement fixes.
OFLD
- Fixed an extra credit issue if FW_RI_TYPE_FINI is delayed in fw due to
backpressure.
- Added a new queue type FW_IQ_TYPE_VF_CQ to handle the FW_PARAMS_PARAM_DMAQ*
commands. queue type will be part of the FW_PARAMS_PARAM_DMAQ_IQ_INTIDX
value. Used in guest RDMA (RDMA from VM/VF) usecase.
- T6 Crypto Coprocessor mode bug fixes.
- T6 Crypto TLS-inline mode bug fixes.
ENHANCEMENTS
------------
BASE:
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer
group mapping for the ports.
ETH:
- Added broadcom consortium next page support for 25G CR.
This can be enabled using flags=an_brcm option in the t6-config.txt file.
- Added spider mode support.
- Added support for 10G-BaseT converter sfp+ module.
- Added support for additional 25G/100G cables.
- Added support to enable/disable auto-neg using ethtool.
================================================================================
Version : 1.16.33.0
Date : 02/24/2017
================================================================================
Fixes
-----
BASE:
- Fixed DDR4 uncorrectable errors.
ETH:
- Enabled link auto negotiation (AN) by default in config file.
- Added AN and FEC control api. Host driver and application can enable/disable
AN and FEC.
ENHANCEMENTS
------------
BASE:
- Enabled High priorty filter.
- Added T6425 adapter support.
ETH:
- Added new workrequest ETH_TX_PKTS2_WR (see fw api document for more details).
================================================================================
Version : 1.16.29.0
Date : 01/27/2017
================================================================================
FIXES
-----
BASE:
- Set multiple fec values only if AN is enabled in config file and when module
is connected.
- Fixed intermittent DDR3/4 ECC errors.
- max number of ethctrl queue in VF set to 2 (reverted the last change
because it causes problem in VF drivers).
ETH:
- Made devlog more verbose by printing cable information in redable form.
- Updated AN settings to work with more 25G/100G switches.
- Added support for more SFP28/QSFP28 cables.
- Fixed an issue of link going down after few hours of idle time.
OFLD:
- Fixed an issue in TLS which was causing fw crash on running TLS traffic.
FOiSCSI:
- Fixed the failure of PXE boot OS install on an iscsi lun.
ENHANCEMENTS
------------
OFLD:
- Added filtering support for NAT. New WR FW_FILTER2_WR and
FW_PARAMS_PARAM_DEV_FILTER2_WR added for the same.
- Added RDMA guest mode (mode 3 or RDMA from VF) support.
================================================================================
T5 Firmware
++++++++++++
================================================================================
Version : 1.16.63.0
Date : 09/29/2017
================================================================================
Fixes
-----
BASE:
- Fixed offload memory overcommit in case of SO adapter.
ETH:
- Fixed DCBX configuration refresh failure.
OFLD
- Fixed 0B iWARP ingress read failure.
FOiSCSI:
- Fixed vlan interface ping failure.
================================================================================
Version : 1.16.59.0
Date : 09/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed an FLR issue which was causing error when VF attached VM was powered on.
ETH:
- Fixed an issue in connection traffic shaping when
FLOWC_WR->FW_FLOWC_MNEM_SCHEDCLASS is not received in first WR on the connection.
- Fixed link failure when speed is changed from 10G-1G-10G due to incorrect flag
check.
- Fixed T580 link failure with few switches which take more time for
establishing link.
ENHANCEMENTS
------------
BASE:
- Ring backbone feature added. New FW_PARAMS_PARAM_DEV_RING_BACKBONE param type
added to query and enable ring backbone support.
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer group
mapping for the ports.
- FW_PARAMS_PARAM_DEV_TPCHMAP API added to read the port to channel mapping.
FOiSCSI:
- iSCSI Command offload target support added.
================================================================================
Version : 1.16.43.0
Date : 05/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed default DCB mode to AUTO.
- Fixed DCBX bugs when AUTO mode is configured in config file.
- Fixed an issue where even after removing PFC from switch, PFC wasn't getting
reset.
ETH:
- Fixed bug in writing multi-bytes using i2c interface.
- Fixed the link failure when optical cable is inserted into the QSA module
after loading the driver.
OFLD
- Fixed an extra credit issue if FW_RI_TYPE_FINI is delayed in fw due to
backpressure.
- Added a new queue type FW_IQ_TYPE_VF_CQ to handle the FW_PARAMS_PARAM_DMAQ*
commands. queue type will be part of the FW_PARAMS_PARAM_DMAQ_IQ_INTIDX
value. Used in guest RDMA (RDMA from VM/VF) usecase.
ENHANCEMENTS
------------
BASE:
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer
group mapping for the ports.
================================================================================
Version : 1.16.33.0
Date : 02/24/2017
================================================================================
ENHANCEMENTS
------------
ETH:
- Added new workrequest ETH_TX_PKTS2_WR (see fw api document for more details).
================================================================================
Version : 1.16.29.0
Date : 01/27/2017
================================================================================
FIXES
-----
BASE:
- max number of ethctrl queue in VF set to 2 (reverted the last change
because it causes problem in VF drivers).
FOiSCSI:
- Fixed the failure of PXE boot OS install on an iscsi lun.
ENHANCEMENTS
------------
OFLD:
- Added filtering support for NAT. New WR FW_FILTER2_WR and
FW_PARAMS_PARAM_DEV_FILTER2_WR added for the same.
- Added RDMA guest mode (mode 3 or RDMA from VF) support.
================================================================================
T4 Firmware
+++++++++++
================================================================================
Version : 1.16.63.0
Date : 09/29/2017
================================================================================
Fixes
-----
ETH:
- Fixed DCBX configuration refresh failure.
FOiSCSI:
- Fixed vlan interface ping failure.
================================================================================
Version : 1.16.59.0
Date : 09/05/2017
================================================================================
FIXES
-----
ETH:
- Fixed an issue in connection traffic shaping when
FLOWC_WR->FW_FLOWC_MNEM_SCHEDCLASS is not received in first WR on the connection.
ENHANCEMENTS
------------
BASE:
- FW_PARAMS_PARAM_DEV_TPCHMAP API added to read the port to channel mapping.
================================================================================
Version : 1.16.43.0
Date : 05/05/2017
================================================================================
FIXES
-----
BASE:
- Fixed default DCB mode to AUTO.
- Fixed DCBX bugs when AUTO mode is configured in config file.
- Fixed an issue where even after removing PFC from switch, PFC wasn't getting
reset.
ETH:
- Fixed bug in writing multi-bytes using i2c interface.
OFLD
- Fixed an extra credit issue if FW_RI_TYPE_FINI is delayed in fw due to
backpressure.
- Added a new queue type FW_IQ_TYPE_VF_CQ to handle the FW_PARAMS_PARAM_DMAQ*
commands. queue type will be part of the FW_PARAMS_PARAM_DMAQ_IQ_INTIDX
value. Used in guest RDMA (RDMA from VM/VF) usecase.
ENHANCEMENTS
------------
BASE:
- Added new API FW_PARAM_PARAM_DEV_MPSBGMAP to read the priority to buffer
group mapping for the ports.
Obtained from: Chelsio Communications
MFC after: 2 weeks
Sponsored by: Chelsio Communications
SUN8I and SUN50I (H3, H5, A83T and A64) have a second clock controller
unit. It controls the clocks for the second gpio controller, the IR
controller etc ...
Support for A83T is not supported.
Tested On: OrangePi One, Pine64
Lookups of the sort are rare compared to regular ones and succesfull ones
result in removing entries from the cache.
In the current code buckets are rlocked and a trylock dance is performed,
which can fail and cause a restart. Fixing it will require a little bit
of surgery and in order to keep the code maintaineable the 2 cases have
to split.
MFC after: 1 week
The later fields of the harvest_event structure are predictable and provide
little value to the entropy pool. Only feed in the relatively high entropy
counter and explicit entropy buffer to increase measured input entropy.
See also:
https://people.freebsd.org/~jmg/vbsdcon_2017_ddfreebsdrng_slides.pdf
PR: 222807
Submitted by: W. Dean Freeman <badfilemagic AT gmail.com>
Reviewed by: jmg (earlier version), delphij
Approved by: secteam (delphij)
Obtained from: HBSD 8d809124d563937edd84c9c9d5494406e359c55c
Security: no -- low entropy marginal input has no known negative affect on pool quality
Differential Revision: https://reviews.freebsd.org/D12610
Provide consistent snapshot of the requested descriptors by preventing
other threads from modifying LDT while we fetch the data, lock dt_lock
around the read. Copy the data into intermediate buffer, which is
copied out after the lock is dropped.
Comparing with the amd64 version, the read is done byte by byte, since
there is no atomic 64bit read (cmpxchg8b method is too heavy comparing
with the avoided issues).
Improve overflow checking for the descriptors range calculations and
remove unneeded casts. Use unsigned types for sizes.
Allow zero num argument to i386_get_ldt() and i386_set_ldt(). This
case is handled naturally by the code flow.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
enough processors. This isn't ideal, because one could still compile
MACHINE_ARCH armv6, but with armv7 options enabled. We don't normally
do that, and it's a bit of an edge case so accept the less than ideal
solution here in the absence of something better.
Reported by: strejda@
Sponsored by: Netflix
Move the retrieval of the image information into loader's main instead
of doing it in efizfs.c
Differential Revision: https://reviews.freebsd.org/D12564
Submitted by: Eric McCorkle
efi_devpath_is_prefix determines if a path matches a passed-in prefix.
Differential Revision: https://reviews.freebsd.org/D12564
Submitted by: Eric McCorkle
When using the default address list nam is still valid, the code in
r324054 assumed that is was NULL.
Reported by: Guy Yur <guyyur@gmail.com>
Tested by: Guy Yur <guyyur@gmail.com>
illumos/illumos-gate@4923c69fdd4923c69fdd
FreeBSD note: the manual page is to be updated separately.
https://www.illumos.org/issues/8067
Add an option to zdb to print a literal embedded block pointer supplied on the
command line:
zdb -E [-A] word0:word1:...:word15
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
Transition all boards that support arm cortex CPUs to armv7. This
leaves two armv6 kernels in the tree. RPI-B, which uses the BCM2835
which has a ARM1176 core, and VERSATILEPB, which is a qemu board setup
around the time RPI-B went in. Copy std.armv6 to std.armv7, even
though that duplicates a lot of stuff. More work needs to be done to
sort out the duplication.
Differential Revision: https://reviews.freebsd.org/D12027
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
This patch adds support for the Flexible File Layout to the pNFS client.
Although the patch is rather large, it should only affect NFS mounts
using the "pnfs" option against pNFS servers that do not support File
Layout.
There are still a couple of things missing from the Flexible File Layout
client implementation:
- The code does not yet do a LayoutReturn with I/O error stats when
I/O error(s) occur when attempting to do I/O on a DS.
This will be fixed in a future commit, since it is important for the
MDS to know that I/O on a DS is failing.
- The current code does writes and commits to mirror DSs serially.
Making them happen concurrently will be done in a future commit,
after discussion on freebsd-current@ on the best way to do this.
- The code does not handle NFSv4.0 DSs. Since there is no extant pNFS
server that implements NFSv4.0 DSs and NFSv4.1 DSs makes more sense
now, I don't intend to implement this until there is a need for it.
There is support for NFSv4.1 and NFSv3 DSs.
Previous code would always spin once before checking the lock. But a lock
with e.g. 6 readers is not going to become free in the duration of once spin
even if they start draining immediately.
Conservatively perform one for each reader.
Note that the total number of allowed spins is still extremely small and is
subject to change later.
MFC after: 1 week
information in this file is now somewhat dated, or is present mostly
correct in the man pages. Retire this file rather than fix it.
Noticed by: cognet@
Sponsored by: Netflix
Improved logging added in r323879 exposed an error during
attach. We need the irq, not the rid to work correctly. em uses
shared irqs, so it will use the same irq for TX as RX. bnxt does
not use shared irqs, or TX irqs at all, so there's no need to set
the TX irq affinity.
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12496
use LDT segments immediately.
If the i386_set_ldt() call created a first LDT descriptor (and
consequently created the LDT) for our address space, LDTR is currently
loaded only on the CPU executing the syscall. Other CPUs executing
threads sharing the address space, would only load LDTR after context
switch.
Uncomment set_user_ldt_rv() and call it on all CPUs. Remove critical
section inside set_user_ldt(), it is not needed in the context of call
from smp_rendezvous().
Set md_ldt after md_ldt_sd is initialized using the same code sequence
as in user_ldt_free(). Do the whole initialization in a critical
section, to not race with the context switching while we set LDT.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
spin first instant of instantly re-readoing and don't re-read after
spinning is finished - the state is already known.
Note the code is subject to significant changes later.
MFC after: 1 week
cpu_switch.S uses curproc->p_md.md_ldt value as the flag indicating
presence of the process LDT. The flag is checked and then ldt segment
descriptor is copied into the CPU' GDT slot.
Disallow context switches around clearing of the curproc LDT state by
performing the cleanup in critical section. Ensure that the md_ldt
flag is cleared before md_ldt_sd descriptor content is destroyed by
inserting fence between the operations.
We depend on the x86 memory model strong ordering guarantees, in
particular, that cpu_switch.S observes the writes to md_ldt and
md_ldt_sd in the expected order.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
A sysctl can have a custom handler that may access data that is initialized
via SYSINIT(9) or via a module event handler (also invoked via SYSINIT).
Thus, it is not safe to allow access to the module's sysctl-s until
the initialization is performed. Likewise, we should not allow access
to teh sysctl-s after the module is uninitialized.
The latter is easy to achieve by properly ordering linker_file_unregister_sysctls
and linker_file_sysuninit.
The former is not as easy for two reasons:
- the initialization may depend on tunables which get set when sysctl-s are
registered, so we need to set the tunables before running sysinit-s
- the initialization may try to dynamically add more sysctl-s under statically
defined sysctl nodes
So, this change splits the sysctl setup into two phases. In the first phase
the sysctl-s are registered as before but they are disabled and hidden from
consumers. In the second phase, done after sysinit-s, normal access to the
sysctl-s is enabled.
The change should affect only dynamic module loading and unloading after
the system boot-up. Nothing changes for sysctl-s compiled into the kernel
and sysctl-s in preloaded modules.
Discussed with: hselasky, ian, jhb
Reviewed by: julian, kib
MFC after: 2 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D12545
Provide consistent snapshot of the requested descriptors by preventing
other threads from modifying LDT while we fetch the data, lock dt_lock
around the read. Copy the data into intermediate buffer, which is
copied out after the lock is dropped.
Use guaranteed atomic (aligned volatile) reads of the descriptors to
use same-size atomic as CPU update to set A bit in the descriptor type
field.
Improve overflow checking for the descriptors range calculations and
remove unneeded casts.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Zero, <TYPE>_MIN and <TYPE>_MAX values can result from valid conversions.
They don't necessarily imply any error.
Since we do not have any reliable error signaling from libkern's strto*(),
it's better to always assume success rather than to report an error when
there is none.
Reviewed by: tsoome
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12565
Compilers are allowed to combine plain reads into group operations,
e.g. 64bit element copies of one array into another can be
legitimately optimized back to a memcpy() call, which r323772 tried to
prevent.
Qualify accesses to LDT descriptors with volatile dereference to
ensure that each write indeed occurs. After that, our usual claim of
native-size aligned writes being atomic applies.
This is equivalent to atomic_store(memory_order_relaxed) C11 accesses,
but our machine/atomic.h does not provide corresponding primitive.
Noted and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
On i386, the function is used from the context switch code and needs
to be accessible externally. Amd64 MD context switch does not lock an
LDT spinlock and inlines switching in assembly.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This makes the LDT to use only one page with default settings,
avoiding the need to find contigous 2 pages in KVA. It seems that
most users are fine even with 512 segments.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This patch adds a few definitions for the Flex File Layout.
Until a future commit adds Flex File layout support, these new fields
are not used.
This patch should not affect the "pnfs" option for File Layout.
Remove some dead conditionals and add an assertion around behavior already
present in aesni_process().
Silence a few Coverity false positives.
CIDs: 1381571, 1381557
Sponsored by: Dell EMC Isilon
