The 32-bit bootloaders on amd64 now use the 32-bit version in ficl32,
as is done with libstand32. The native 64-bit ficl will be used by the
upcoming UEFI loader.
Sponsored by: The FreeBSD Foundation
We don't know our ARM security state, so one of them will operate.
- Don't set frequency, since it's unpossible in non-secure state.
Only rely on DTS clock-frequency value or get clock from timer.
Discussed with: ian, cognet
Support covers device drivers for:
- Interrupt Combiner
- gpio/pad, External Interrupts Controller (pad)
- I2C Interface
- Chrome Embedded Controller
- Chrome Keyboard
Also:
- Use new gpio dev class in EHCI driver
- Expand device tree information
The ADC has a 12bit resolution and its raw output can be read via sysctl(8)
interface.
The driver allows the setup of ADC clock, samples average and open delay
(the number of clock cycles to wait before start the conversion).
The TSC_ADC module is set in the general purpose mode (no touchscreen
support).
Tested on Beaglebone-black.
Written based on AM335x TRM.
Reviewed by: rpaulo
Approved by: adrian (mentor)
Tested by: me, Brian J. McGovern, Sulev-Madis Silber (ketas)
Remove the uart support in favour of a "jtag-uart" interface imitation
providing a much simpler interface, directly exported to the host,
allowing the toolchain to be shared with BERI on Altera. [1]
Submitted by: Jong Hun HAN (jong.han cl.cam.ac.uk) [1]
MFC after: 2 weeks
when MBR contains only PMBR entry or it is bootcamp-compatible.
If MBR has PMBR entry and some other, the loader rejects it.
Make these checks to be less strict. If loader decided that PMBR
isn't suitable for GPT, it will use MBR.
Reported by: Paul Thornton
Tested by: Paul Thornton
MFC after: 1 week
- Display slice and partition as <auto> instead of 0 or -1 when they're
not set to specific values (the paritition=-1 was confusing folks).
- When loaderdev isn't set in the u-boot environment, say so rather
than displaying unknown device ''.
- Print the loader(8) ident/version info earlier, so that all device-
related info appears together afterwards.
The one change here that isn't purely cosmetic is to call setheap()
earlier. The comment says "Initialise heap as early as possible", now
that's more accurate. It shouldn't make any functional difference, but
may be safer if future changes lead to trying to allocate memory earlier.
setting the u-boot environment variable loaderdev=. It used to accept only
'disk' or 'net'. Now it allows specification of unit, slice, and partition
as well. In addition to the generic 'disk' it also accepts specific
storage device types such as 'mmc' or 'sata'.
If there isn't a loaderdev env var, the historical behavior is maintained.
It will use the first storage device it finds, or a network device if
no working storage device exists.
99% of the work on this was done by Patrick Kelsey, but I made some
changes, so if anything goes wrong, blame me.
Submitted by: Patrick Kelsey <kelsey@ieee.org>
by having uboot_autoload() do the fdt setup (which may load a file) rather
than waiting until we're actually in the process of launching the kernel.
As part of making this happen...
- Define LOADER_FDT_SUPPORT on the uboot/lib compile command line when
MK_FDT is set.
- Make fdt_setup_fdtb() public.
- Declare public fdt_whatever() functions in a header instead of using
scattered extern decls in .c files.
(1) Invoke cpp to bring in files via #include (although the old
/include/ stuff is supported still).
(2) bring in files from either vendor tree or freebsd-custom files
when building.
(3) move all dts* files from sys/boot/fdt/dts to
sys/boot/fdt/dts/${MACHINE} as appropriate.
(4) encode all the magic to do the build in sys/tools/fdt/make_dtb.sh
so that the different places in the tree use the exact same logic.
(5) switch back to gpl dtc by default. the bsdl one in the tree has
significant issues not easily addressed by those unfamiliar with
the code.
Apparently, LIBZFS is set to a non-empty string when WITHOUT_CDDL/WITHOUT_ZFS
are set, I think this is a bug, but work around this feature for now.
Reviewed by: grehan
Quartz is a tiny module utilized Freescale VF6xx
system-on-chip and development kit produced by
Device Solutions.
Quartz is available in a form of LGA (38x38x2mm)
or as a module with high-density connectors.
Sponsored by: Device Solutions
while this won't actually be used for anything (yet), it doesn't hurt to
ensure it is exposed to the tinderbox.
Requested by: imp, jmallett
MFC after: 3 weeks
fragments; while this won't actually be used for anything (yet), it
doesn't hurt to ensure it is exposed to the tinderbox.
Requested by: imp, jmallett
MFC after: 3 weeks
The first I2C controller is only used to manage the on-board devices (PMIC
and HDMI framer) and its bus is not exposed on the expasion headers.
With this change the following pins on the P9 expansion headers are now
reserved as I2C pins:
Pin 17 - I2C1 SCL
Pin 18 - I2C1 SDA
Pin 19 - I2C2 SCL
Pin 20 - I2C2 SDA
The I2C2 is the bus that should be used to read the contents of cape
eeproms.
Approved by: adrian (mentor, implicit)
these binaries aren't immediately useful on other MIPSes, still build them
as part of mips64 world in order to expose them to tinderbox.
MFC after: 3 weeks
Sponsored by: DARPA, AFRL
a 64-bit architecture, rather than trying to share the 32-bit MIPS ficl
configuration.
When building ficl on MIPS, don't conflate 32-bit and 64-bit ISAs -- unlike
x86, we don't want a 32-bit loader on a 64-bit CPU. Use quite conservative
code generation -- e.g., softfloat, no GOT, etc -- suitable for early boot.
MFC after: 3 weeks
Sponsored by: DARPA, AFRL
The name is taken from the u-boot env vars fdtfile or fdt_file. If the
name isn't fully-qualified a search is done in module_path locations.
The search order for a usable dtb in fdt_setup_fdtp() is now
- A dtb loaded with an explicit "load -t dtb" command.
- A dtb already loaded into memory somehow[*] and pointed to by fdt_to_load.
- A dtb in the memory pointed to by the u-boot env vars fdtaddr or fdt_addr.
- A file named by the u-boot env vars fdtfile or fdt_file.
- A static dtb compiled into the kernel.
* Presumably by some arch-specific command or code.
arguments from type,filename to filename,type to be consistant with other
public file_whatever() functions, and change it to return a pointer to
the preloaded_file struct describing the file. Adjust existing callers.
The old code basically said it was going to use some particular blob
without knowing whether it could successfully do so, then it would invoke
the function to do that and return its status. If it failed, you were
done, even if other blobs might be available. Now the code attempts to use
some particular blob and if that succeeds it says so and returns success,
otherwise it moves on to try another potential blob.
One specific problem this solves is when u-boot sets an fdtaddr variable
to point to some memory address, then doesn't actually load a blob at
that address. Now the header check will fail, and the code will move
on to the fallback dtb compiled into the kernel (if any).
If a "loaderdev=<device>" env variable is set and the named device
exists, it is used. If the device doesn't exist, fall back to the
historic "probe" loop that prefers disk devices over network devices.
If the env var is not set, preserve the historic behavior of using the
first working disk device provided by u-boot, or a network device if no
functional disk device is found and a network device exists.
The old probe loop is reworked so that it checks all bootable devices
provided by u-boot rather than taking an early-out on the first device
found. This results in the cosmetic change of listing all potential boot
devices for the user, but the behavior of which device it chooses is the
same as it has always been.
Modelled after the i386 zfsloader. However, with no
2nd stage zfsboot to search for a bootable dataset,
attempt a ZFS boot if there is more than one ZFS
dataset found during the disk probe.
sys/boot/userboot/zfs
- build the ZFS boot library
sys/boot/userboot/userboot/
conf.c
- Add the ZFS pool and filesystem tables
devicename.c
- correctly format ZFS devices
main.c
- increase the size of the libstand malloc pool
to account for the increased usage from ZFS buffers
- probe for a ZFS dataset, and if one is
found, attempt to boot from it.
usr.sbin/bhyveload/bhyveload.c
- allow multiple invocations of the '-d' option
to specify multiple disks e.g. a raidz set.
Up to 32 disks are supported.
Tested with various combinations of GPT, MBR, single
and multiple disks, RAID-Z, mirrors.
Reviewed by: neel
Discussed with: avg
Tested by: Michael Dexter and others
MFC after: 3 weeks
source shows that board vendors seem to be about evenly split on this.
This commit is a trivial change to note that while the previous change
was supposed to be whitespace only, this functional change also crept in.
The added lines were:
/* Board vendors use both fdtaddr and fdt_addr names. Grrrr. */
if (s == NULL)
s = ub_env_get("fdt_addr");
The temperature monitor device is enabled to sample the die temperature at
16hz. The temperature is published via sysctl. A callout routine at 10hz
monitors the temperature and throttles back the cpu if the temperature
goes over a user-settable throttle point (by default 10C less than the
critical high-point temperature for the chip). The hardware is supposed
to be able to deliver an interrupt when the temperature exceeds a settable
limit, but the interrupt never arrives so for now a callout does the job.
At attach time we read the maximum cpu frequency the chip is allowed to run
at and the cpu is set to run at that speed. It's reported at attach time.
A sysctl variable reports the current speed when queried.
New sysctl values:
dev.imx6_anatop.0.cpu_mhz: 984
dev.imx6_anatop.0.temperature: 37.9C
dev.imx6_anatop.0.throttle_temperature: 95.0C
Steven Lawrance did the initial heavy lifting on this, but I changed
enough stuff that I'm the one to blame if anything breaks.
Submitted by: Steven Lawrance <stl@koffein.net>
While here, don't overwrite the error message on interactive use and add
the missing '\n' at end of error message for the non interactive use.
Tested by: ian, myself
Approved by: adrian (mentor, implicit)
license, although the former is pretty safe, it wasn't intended to be
used in the version of MIPS boot2/loader upstreamed to FreeBSD.
MFC after: 3 weeks
Sponsored by: DARPA, AFRL
particular interest in (and support for) SRI International and the
University of Cambridge's BERI FPGA soft-core processor. This includes
micro device drivers for the Altera JTAG UART console, memory-mapped
flash, and the Altera SD Card IP core in both boot2 and loader. boot2
can be written to the on-board Intel StrataFlash on the DE4 board, and
loader can be placed in StrataFlash or the SD Card.
Plenty of XXX comments, but works quite well locally in practice and I
am using it daily. Although I had originally ported the ARM version
of boot2, the current version is x86-derived as that proved more
feature-complete. As we don't currently use partitions on our flash
disks, support for that has been commented out relative to x86, but
would be easy to add back. FDT support has not yet been hooked up,
although some skeleton parts have been put in place for that.
This may well be a useful starting point for ports to other 32-bit and
64-bit MIPS-ISA systems.
This merge is synchronised to CheriBSD github commit
e41d74fd71, but with some additions of
$FreeBSD.
MFC after: 3 weeks
Sponsored by: DARPA, AFRAL
Add gpioled(4) to BEAGLEBONE kernel and add the description of the four
on-board leds of beaglebone-black to its DTS file.
Approved by: adrian (mentor, implicit)
A 32-bit libstand is needed on 64-bit platforms for use by various
bootloaders. Previously only the 32-bit version was built, installed as
/usr/lib/libstand.a.
A new 64-bit libstand consumer will arrive in the near future, so move
the bootloader-specific 32-bit version to sys/boot/libstand32/.
Explicitly link against this version in the 32-bit loaders.
Sponsored by: The FreeBSD Foundation
Hetzel <swhetzel@gmail.com> on the -doc mailing list.
Also modify the Author section to be clear that I wrote the man page,
not gptboot.
MFC after: 3 days
- Similar to the hack for bootinfo32.c in userboot, define
_MACHINE_ELF_WANT_32BIT in the load_elf32 file handlers in userboot.
This allows userboot to load 32-bit kernels and modules.
- Copy the SMAP generation code out of bootinfo64.c and into its own
file so it can be shared with bootinfo32.c to pass an SMAP to the i386
kernel.
- Use uint32_t instead of u_long when aligning module metadata in
bootinfo32.c in userboot, as otherwise the metadata used 64-bit
alignment which corrupted the layout.
- Populate the basemem and extmem members of the bootinfo struct passed
to 32-bit kernels.
- Fix the 32-bit stack in userboot to start at the top of the stack
instead of the bottom so that there is room to grow before the
kernel switches to its own stack.
- Push a fake return address onto the 32-bit stack in addition to the
arguments normally passed to exec() in the loader. This return
address is needed to convince recover_bootinfo() in the 32-bit
locore code that it is being invoked from a "new" boot block.
- Add a routine to libvmmapi to setup a 32-bit flat mode register state
including a GDT and TSS that is able to start the i386 kernel and
update bhyveload to use it when booting an i386 kernel.
- Use the guest register state to determine the CPU's current instruction
mode (32-bit vs 64-bit) and paging mode (flat, 32-bit, PAE, or long
mode) in the instruction emulation code. Update the gla2gpa() routine
used when fetching instructions to handle flat mode, 32-bit paging, and
PAE paging in addition to long mode paging. Don't look for a REX
prefix when the CPU is in 32-bit mode, and use the detected mode to
enable the existing 32-bit mode code when decoding the mod r/m byte.
Reviewed by: grehan, neel
MFC after: 1 month
in the dts source, and adding the right devices to the kernel config. Also
generally bring the kernel config into line with what we have for other
Marvell/Kirkwood systems (add lots of useful devices and options).
One particularly notable addition amongst the kernel config changes is
USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives.
PR: kern/181975 arm/162159
the LED specification was just misplaced). The rather odd memory mappings
that were in place used an undocumented attribute value (0x0f) that caused
problems with the system.
Submitted by: Markus Pfeiffer <markus.pfeiffer@morphism.de>
4370 avoid transmitting holes during zfs send
4371 DMU code clean up
illumos/illumos-gate@43466aae47
NOTE: Make sure the boot code is updated if a zpool upgrade is
done on boot zpool.
MFC after: 2 weeks
directly to the linker (LD_FLAGS) from flags passed indirectly, via the
compiler driver (LDFLAGS).
This is because several Makefiles under sys/boot/i386 and sys/boot/pc98
use ${LD} directly to link, and the normal LDFLAGS value should not be
used in these cases.
MFC after: 3 days
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
sys/boot/fdt/dts/bindings-gpio.txt. Make the led pin an output, add the
missing flag field. No functional change (gpioled(4) isn’t supported on
FDT systems yet).
Approved by: adrian (mentor)
conditionally include (but ignore failures) /boot/loader.rc.local and
/boot/menu.rc.local -- to make customizing the menu easier.
Reviewed by: alfred
Discussed on: -hackers
menu. This is reported to save headaches on some PPC systems where unload
followed by load does not produce the desired results wherein if-given
the opportunicy to abort the initial loading sequence, you can customize
the first load.
Reviewed by: nwhitehorn, kan
Discussed on: -current
kernel selection menu to the beastie menu. List of kernels is taken from
`kernels' in loader.conf(5) as a space (or comma) separated list of names
to display (up to 9). If not set, default value is "kernel kernel.old".
Does not validate that kernels exist because the next enhancement will be
to allow selection of the root device.
Discussed on: -current
MFC after: 3 days
Use the published compatible strings (our own invention, "ti,mmchs" is
still accepted as well, for now).
Don't blindly turn on 8-bit bus mode, because even though the conroller
supports it, the board has to be wired appropriately as well. Use the
published property (bus-width=<n>) and honor all the valid values (1,4,8).
The eMMC device on a Beaglebone Black is wired for 8-bit, update the dts.
The mmchs controller can inherently do both 1.8v and 3.0v on the first
device and 1.8v only on other devices, unless an external transceiver is
used. Set the voltage automatically for the first device and honor
the published fdt property (ti,dualvolt) for other devices.
Thanks go to Ilya Bakulin for figuring out the voltage compatibility stuff.
The imx6.dtsi is incomplete, but has enough to support devices that work
right now. Eventually it will need to be split into several files that
account for the differences between SoCs in the imx6 family.
The board config for Wandboard Dual is untested. Solo and Quad work, but
one one core is turned on for the quad right now (baby steps).
than one unit with four busses attached to it. This allows us to use
existing fdt data which describes separate devices with separate resources.
It also allows any combination of the units to be en/disabled in the
board dts files.
Adjust our dts code to match what's used by linux and u-boot now that
we're structured to do so.
Document lots of interesting stuff learned whiling doing this with a big
comment block in the driver, so I don't have to re-learn it for the next
round of changes.
The ng_create_one() and ng_mkpeer() functions in network.subr are
now not used anywhere, but I left them, since they can be useful
in future in netgraph scripting.
Submitted by: pluknet
All Armada XP chips should be affected. It is necessary to handle
busy interrupt/indication by enabling busy-detect property in DTS.
Tested by: kevlo
Approved by: cognet (mentor)
Switch the majority of device configuration to FDT from hints.
Add BERI_*_BASE configs to reduce duplication in the MDROOT and SDROOT
kernels.
Add NFS and GSSAPI support by default.
MFC after: 3 days
Sponsored by: DARPA/AFRL
Refactor of /dev/random device. Main points include:
* Userland seeding is no longer used. This auto-seeds at boot time
on PC/Desktop setups; this may need some tweeking and intelligence
from those folks setting up embedded boxes, but the work is believed
to be minimal.
* An entropy cache is written to /entropy (even during installation)
and the kernel uses this at next boot.
* An entropy file written to /boot/entropy can be loaded by loader(8)
* Hardware sources such as rdrand are fed into Yarrow, and are no
longer available raw.
------------------------------------------------------------------------
r256240 | des | 2013-10-09 21:14:16 +0100 (Wed, 09 Oct 2013) | 4 lines
Add a RANDOM_RWFILE option and hide the entropy cache code behind it.
Rename YARROW_RNG and FORTUNA_RNG to RANDOM_YARROW and RANDOM_FORTUNA.
Add the RANDOM_* options to LINT.
------------------------------------------------------------------------
r256239 | des | 2013-10-09 21:12:59 +0100 (Wed, 09 Oct 2013) | 2 lines
Define RANDOM_PURE_RNDTEST for rndtest(4).
------------------------------------------------------------------------
r256204 | des | 2013-10-09 18:51:38 +0100 (Wed, 09 Oct 2013) | 2 lines
staticize struct random_hardware_source
------------------------------------------------------------------------
r256203 | markm | 2013-10-09 18:50:36 +0100 (Wed, 09 Oct 2013) | 2 lines
Wrap some policy-rich code in 'if NOTYET' until we can thresh out
what it really needs to do.
------------------------------------------------------------------------
r256184 | des | 2013-10-09 10:13:12 +0100 (Wed, 09 Oct 2013) | 2 lines
Re-add /dev/urandom for compatibility purposes.
------------------------------------------------------------------------
r256182 | des | 2013-10-09 10:11:14 +0100 (Wed, 09 Oct 2013) | 3 lines
Add missing include guards and move the existing ones out of the
implementation namespace.
------------------------------------------------------------------------
r256168 | markm | 2013-10-08 23:14:07 +0100 (Tue, 08 Oct 2013) | 10 lines
Fix some just-noticed problems:
o Allow this to work with "nodevice random" by fixing where the
MALLOC pool is defined.
o Fix the explicit reseed code. This was correct as submitted, but
in the project branch doesn't need to set the "seeded" bit as this
is done correctly in the "unblock" function.
o Remove some debug ifdeffing.
o Adjust comments.
------------------------------------------------------------------------
r256159 | markm | 2013-10-08 19:48:11 +0100 (Tue, 08 Oct 2013) | 6 lines
Time to eat crow for me.
I replaced the sx_* locks that Arthur used with regular mutexes;
this turned out the be the wrong thing to do as the locks need to
be sleepable. Revert this folly.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com> (In original diff)
------------------------------------------------------------------------
r256138 | des | 2013-10-08 12:05:26 +0100 (Tue, 08 Oct 2013) | 10 lines
Add YARROW_RNG and FORTUNA_RNG to sys/conf/options.
Add a SYSINIT that forces a reseed during proc0 setup, which happens
fairly late in the boot process.
Add a RANDOM_DEBUG option which enables some debugging printf()s.
Add a new RANDOM_ATTACH entropy source which harvests entropy from the
get_cyclecount() delta across each call to a device attach method.
------------------------------------------------------------------------
r256135 | markm | 2013-10-08 07:54:52 +0100 (Tue, 08 Oct 2013) | 8 lines
Debugging. My attempt at EVENTHANDLER(multiuser) was a failure; use
EVENTHANDLER(mountroot) instead.
This means we can't count on /var being present, so something will
need to be done about harvesting /var/db/entropy/... .
Some policy now needs to be sorted out, and a pre-sync cache needs
to be written, but apart from that we are now ready to go.
Over to review.
------------------------------------------------------------------------
r256094 | markm | 2013-10-06 23:45:02 +0100 (Sun, 06 Oct 2013) | 8 lines
Snapshot.
Looking pretty good; this mostly works now. New code includes:
* Read cached entropy at startup, both from files and from loader(8)
preloaded entropy. Failures are soft, but announced. Untested.
* Use EVENTHANDLER to do above just before we go multiuser. Untested.
------------------------------------------------------------------------
r256088 | markm | 2013-10-06 14:01:42 +0100 (Sun, 06 Oct 2013) | 2 lines
Fix up the man page for random(4). This mainly removes no-longer-relevant
details about HW RNGs, reseeding explicitly and user-supplied
entropy.
------------------------------------------------------------------------
r256087 | markm | 2013-10-06 13:43:42 +0100 (Sun, 06 Oct 2013) | 6 lines
As userland writing to /dev/random is no more, remove the "better
than nothing" bootstrap mode.
Add SWI harvesting to the mix.
My box seeds Yarrow by itself in a few seconds! YMMV; more to follow.
------------------------------------------------------------------------
r256086 | markm | 2013-10-06 13:40:32 +0100 (Sun, 06 Oct 2013) | 11 lines
Debug run. This now works, except that the "live" sources haven't
been tested. With all sources turned on, this unlocks itself in
a couple of seconds! That is no my box, and there is no guarantee
that this will be the case everywhere.
* Cut debug prints.
* Use the same locks/mutexes all the way through.
* Be a tad more conservative about entropy estimates.
------------------------------------------------------------------------
r256084 | markm | 2013-10-06 13:35:29 +0100 (Sun, 06 Oct 2013) | 5 lines
Don't use the "real" assembler mnemonics; older compilers may not
understand them (like when building CURRENT on 9.x).
# Submitted by: Konstantin Belousov <kostikbel@gmail.com>
------------------------------------------------------------------------
r256081 | markm | 2013-10-06 10:55:28 +0100 (Sun, 06 Oct 2013) | 12 lines
SNAPSHOT.
Simplify the malloc pools; We only need one for this device.
Simplify the harvest queue.
Marginally improve the entropy pool hashing, making it a bit faster
in the process.
Connect up the hardware "live" source harvesting. This is simplistic
for now, and will need to be made rate-adaptive.
All of the above passes a compile test but needs to be debugged.
------------------------------------------------------------------------
r256042 | markm | 2013-10-04 07:55:06 +0100 (Fri, 04 Oct 2013) | 25 lines
Snapshot. This passes the build test, but has not yet been finished or debugged.
Contains:
* Refactor the hardware RNG CPU instruction sources to feed into
the software mixer. This is unfinished. The actual harvesting needs
to be sorted out. Modified by me (see below).
* Remove 'frac' parameter from random_harvest(). This was never
used and adds extra code for no good reason.
* Remove device write entropy harvesting. This provided a weak
attack vector, was not very good at bootstrapping the device. To
follow will be a replacement explicit reseed knob.
* Separate out all the RANDOM_PURE sources into separate harvest
entities. This adds some secuity in the case where more than one
is present.
* Review all the code and fix anything obviously messy or inconsistent.
Address som review concerns while I'm here, like rename the pseudo-rng
to 'dummy'.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
------------------------------------------------------------------------
r255319 | markm | 2013-09-06 18:51:52 +0100 (Fri, 06 Sep 2013) | 4 lines
Yarrow wants entropy estimations to be conservative; the usual idea
is that if you are certain you have N bits of entropy, you declare
N/2.
------------------------------------------------------------------------
r255075 | markm | 2013-08-30 18:47:53 +0100 (Fri, 30 Aug 2013) | 4 lines
Remove short-lived idea; thread to harvest (eg) RDRAND enropy into the
usual harvest queues. It was a nifty idea, but too heavyweight.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
------------------------------------------------------------------------
r255071 | markm | 2013-08-30 12:42:57 +0100 (Fri, 30 Aug 2013) | 4 lines
Separate out the Software RNG entropy harvesting queue and thread
into its own files.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
------------------------------------------------------------------------
r254934 | markm | 2013-08-26 20:07:03 +0100 (Mon, 26 Aug 2013) | 2 lines
Remove the short-lived namei experiment.
------------------------------------------------------------------------
r254928 | markm | 2013-08-26 19:35:21 +0100 (Mon, 26 Aug 2013) | 2 lines
Snapshot; Do some running repairs on entropy harvesting. More needs
to follow.
------------------------------------------------------------------------
r254927 | markm | 2013-08-26 19:29:51 +0100 (Mon, 26 Aug 2013) | 15 lines
Snapshot of current work;
1) Clean up namespace; only use "Yarrow" where it is Yarrow-specific
or close enough to the Yarrow algorithm. For the rest use a neutral
name.
2) Tidy up headers; put private stuff in private places. More could
be done here.
3) Streamline the hashing/encryption; no need for a 256-bit counter;
128 bits will last for long enough.
There are bits of debug code lying around; these will be removed
at a later stage.
------------------------------------------------------------------------
r254784 | markm | 2013-08-24 14:54:56 +0100 (Sat, 24 Aug 2013) | 39 lines
1) example (partially humorous random_adaptor, that I call "EXAMPLE")
* It's not meant to be used in a real system, it's there to show how
the basics of how to create interfaces for random_adaptors. Perhaps
it should belong in a manual page
2) Move probe.c's functionality in to random_adaptors.c
* rename random_ident_hardware() to random_adaptor_choose()
3) Introduce a new way to choose (or select) random_adaptors via tunable
"rngs_want" It's a list of comma separated names of adaptors, ordered
by preferences. I.e.:
rngs_want="yarrow,rdrand"
Such setting would cause yarrow to be preferred to rdrand. If neither of
them are available (or registered), then system will default to
something reasonable (currently yarrow). If yarrow is not present, then
we fall back to the adaptor that's first on the list of registered
adaptors.
4) Introduce a way where RNGs can play a role of entropy source. This is
mostly useful for HW rngs.
The way I envision this is that every HW RNG will use this
functionality by default. Functionality to disable this is also present.
I have an example of how to use this in random_adaptor_example.c (see
modload event, and init function)
5) fix kern.random.adaptors from
kern.random.adaptors: yarrowpanicblock
to
kern.random.adaptors: yarrow,panic,block
6) add kern.random.active_adaptor to indicate currently selected
adaptor:
root@freebsd04:~ # sysctl kern.random.active_adaptor
kern.random.active_adaptor: yarrow
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
Submitted by: Dag-Erling Smørgrav <des@FreeBSD.org>, Arthur Mesh <arthurmesh@gmail.com>
Reviewed by: des@FreeBSD.org
Approved by: re (delphij)
Approved by: secteam (des,delphij)
protected mode and may leave protected-mode-specific flags like PSL_NT set
when they return to real mode. This can cause a fault when BTX re-enters
protected mode after the BIOS mode returns.
PR: amd64/182740
Reported by: Julian Pidancet <julian.pidancet@gmail.com>
Approved by: re (gjb)
MFC after: 1 week
Looking pretty good; this mostly works now. New code includes:
* Read cached entropy at startup, both from files and from loader(8) preloaded entropy. Failures are soft, but announced. Untested.
* Use EVENTHANDLER to do above just before we go multiuser. Untested.
WITH[OUT]_SSP to avoid hitting an error if user has WITH_SSP in their
make.conf. Ports now use this knob.
make[7]: "/usr/src/share/mk/bsd.own.mk" line 466: WITH_SSP and
WITHOUT_SSP can't both be set.
This is similar to previous cleanup done in r188895
Approved by: bapt
Reviewed by: jlh (earlier version)
Approved by: re (marius)
MFC after: 1 week
- libkern is missing __aeabi_llsl, implement this by calling __ashldi3.
- Because of how the asm entry macros are defined the boot2 code
requires the unwind symbols to exist, include them in boot2.
Approved by: re (marius)
and add support for default underride to $loader_version, acting as a way to
name a release. Release text is not displayed for the aforementioned feature
of alternate display layout (introduced in r254237); however, for all other
layouts (incl. default), the release name is displayed at lower-right.
See version.4th(8) for additional information and/or historical details.
NOTE: Also a minor edit to version.4th(8) while we're here.
The TI uart hardware is ns16550-compatible, except that before it can
be used the clocks and power have to be enabled and a non-standard
mode control register has to be set to put the device in uart mode
(as opposed to irDa or other serial protocols). This adds the extra
code in an extension to the standard ns8250 probe routine, and the
rest of the driver is just the standard ns8250 code.
The MMCHS hardware is pretty much a standard SDHCI v2.0 controller with a
couple quirks, which are now supported by sdhci(4) as of r254507.
This should work for all TI SoCs that use the MMCHS hardware, but it has
only been tested on AM335x right now, so this enables it on those platforms
but leaves the existing ti_mmchs driver in place for other OMAP variants
until they can be tested.
This initial incarnation lacks DMA support (coming soon). Even without it
this improves performance pretty noticibly over the ti_mmchs driver,
primarily because it now does multiblock IO.
Add support for A20 timer.
Correct interrupt offset depending from chip.
Add basic code for CPU configuration module.
For now, add kernel config and dts file
(only FDT blob related problem needs to be solved later in
order to have one kernel for both cubieboard1 and 2).
Approved by: ray@
being defined in <sys/diskmbr.h>. Instead give the symbols here a
"PC98_" prefix. This way, both <sys/diskmbr.h> and <sys/diskpc98.h>
can be included in the same C source file.
The renaming is trivial. The only gotcha is that DOSBBSECTOR is
also redefined from 0 to 1. This because DOSBBSECTOR was always
used in conjunction with an addition of 1. The PC98_BBSECTOR symbol
is defined as 1 and the expression is simplified.
Note: it is not believed that ports are seriously impacted; or at
all for that matter.
Approved by: nyan@
interpreter that can be run on the system and as such cannot be
compiled against libbstand. On the one hand this means we need to
include the usual headers for system interfaces that we use and
on the the other hand we can only use standard system interfaces.
While here, define local variables only when needed to make this
WARNS=2 clean on amd64.
PR: 172542
Obtained from: peterj@
Pointed out by: Jan Beich <jbeich@tormail.org>
isdir? ( fd -- bool )
freaddir ( fd -- ptr len TRUE | FALSE )
The 'isdir?' word returns `true' if the file descriptor is for a
directory and `false' otherwise.
The 'freaddir' word reads the next directory entry and if successful,
returns its name and 'true'. Otherwise 'false' is returned.
These words give the loader the ability to scan directories and read
files contained in them for 'rc.d'-like flexibility in handling which
modules to load and/or which tunables to set.
Obtained from: Juniper Networks, Inc.
