Commit Graph

1410 Commits

Author SHA1 Message Date
Poul-Henning Kamp
0c7721e8f9 Disable the use of cloning use in floppy and CD drivers.
This commit puts the relevant code snippets under #ifdef GONE_IN_5
(rather than #ifndef BURN_BRIDGES) thereby disabling the code now.

The code wil be entirely removed before 5.2 unless we find reasons
why this would be a bad idea.

Approach suggested by:	imp
2003-09-11 19:27:24 +00:00
Bruce Evans
4df0520624 clock.c:
Quick fix for calling DELAY() for ddb input in some (atkbd-based)
console drivers.  ddb must not use any normal locks, but DELAY()
normally calls getit() which needs clock_lock.  One problem with using
normal locks in ddb is that deadlock is possible, but deadlock on
clock_lock is unlikely becaluse clock_lock is bogusly recursive,
apparently just to hide the problem of ddb using it.  The i8254 clock
hardware has mostly write-only registers so it is important for it to
use a lock that gives exclusive access.  (atkbd hardware is also
unfriendly to reentrant software but that problem is more local and
already solved.)  I mostly saw the symptoms of the bug caused by
unlocking in getit() running cpu_unpend().  cpu_unpend() should not
be called while in ddb and Debugger() calls for failing assertions
about this caused a breakpoint within ddb.

ddb must also not call getit() because ddb may be being used to step
through clock initialization code that has stopped or otherwise mangled
the clock.  If the clock is stopped, then getit() always returns the
same value and DELAY() takes forever if it trusts getit().

The quick fix is implement DELAY(n) as (n * timer_freq / 1000000)
inb(0x84)'s if ddb is active.

machdep.c:
Don't permit recursion on clock_lock.
2003-09-07 14:23:08 +00:00
Peter Wemm
b324e86370 Clean up some antique stuff. We do not support Weitek FPUs etc, and never
did.
2003-09-05 14:54:26 +00:00
Poul-Henning Kamp
7837155fa2 Put the device cloning functions for disk-drivers under #ifndef BURN_BRIDGES.
For the floppy driver, use fdcontrol to manipulate density selection.

For the CD drivers, the 'a' and 'c' suffix is without actual effect and
any applications insisting on it can be satisfied with a symlink:
	ln -s /dev/cd0 /dev/cd0a

Ongoing discussion may result in these pieces of code being removed before
the 5-stable branch as opposed to after.
2003-09-05 10:40:16 +00:00
Poul-Henning Kamp
78a49a45bc Give timecounters a numeric quality field.
A timecounter will be selected when registered if its quality is
not negative and no less than the current timecounters.

Add a sysctl to report all available timecounters and their qualities.

Give the dummy timecounter a solid negative quality of minus a million.

Give the i8254 zero and the ACPI 1000.

The TSC gets 800, unless APM or SMP forces it negative.

Other timecounters default to zero quality and thereby retain current
selection behaviour.
2003-08-16 08:23:53 +00:00
Poul-Henning Kamp
8dcee923b5 remove acquire_timer0() and release_timer0() and related stuff. 2003-08-15 15:50:49 +00:00
Poul-Henning Kamp
2fbc275447 Dont initialize a TSC timecounter until we know if it is broken or not. 2003-08-06 15:05:27 +00:00
Doug Ambrisko
a373227418 Add printer support to puc(4) driver.
-	Move isa/ppc* to sys/dev/ppc (repo-copy)
      -	Add an attachment method to ppc for puc
      -	In puc we need to walk the chain of parents.
Still to do, is to make ppc(4) & puc(4) work on other platforms.  Testers
wanted.

PR:		38372 (in spirit done differently)
Verified by:	Make universe (if I messed up a platform please fix)
2003-08-01 02:25:32 +00:00
Mike Heffner
e0c22597cb Add support for the A4 Tech RFSW-35 mouse wheel. Probe is similar to
4D Plus.

PR:		44333
2003-07-12 18:36:04 +00:00
John Baldwin
c37faf267c - Make the isab devclass global to allow for multiple ISA bridge drivers.
- Factor out code common to all ISA bridge drivers attach methods into a
  isab_attach() function.
- Rename the PCI-ISA bridge driver's attach function to pci_isab_attach()
  and have it call isab_attach().
2003-07-08 18:56:58 +00:00
Mike Heffner
b1181a94a3 Reset the PSM aux device twice to help pierce through some KVM's to
get the correct data from the attached mouse. Multiple resets should
be harmless, but just in case, the second one is non-fatal and is just
ignored.
2003-07-07 05:40:13 +00:00
John Baldwin
8a9bc9c03b - Use the new resource_disabled() helper function to see if devices are
disabled.
- Change the apm driver to match the acpi driver's behavior by checking to
  see if the device is disabled in the identify routine instead of in the
  probe routine.  This way if the device is disabled it is never created.

Note that a few places (ips(4), Alpha SMP) used "disable" instead of
"disabled" for their hint names, and these hints must be changed to
"disabled".  If this is a big problem, resource_disabled() can always be
changed to honor both names.
2003-07-02 16:09:02 +00:00
Mike Heffner
6d1c16554d Add PnP PS/2 id for Dell Latitude X200.
PR:		48516
MFC after:	2 weeks
2003-07-01 14:41:16 +00:00
Yaroslav Tykhiy
62cc1e0584 Force media autodetection if the device has lost its parameter table.
Previously, any normal I/O on an fdc(4) device would fail with ENXIO
if the device had been opened in non-blocking mode and then closed
prior to the conventional access; that would last until the floppy
disk was ejected and re-inserted to raise the unit attention condition.

Add a clarifying comment.
2003-06-16 08:42:20 +00:00
Yaroslav Tykhiy
f79981aca8 If in non-blocking mode, return EAGAIN instead of ENXIO
on an I/O attempt.  This is needed for consistency with
the concept of the half-opened state of fdc(4).

PR:		kern/52338
2003-06-16 07:50:17 +00:00
Yaroslav Tykhiy
83efe35a66 Always set bio_resid properly in fdstrategy(),
as should every block device strategy routine.
There was at least one evil consequence of not doing so:
Some errors returned by fdstrategy() could be lost (EAGAIN,
in particular.)

PR:		kern/52338 (in the audit-trail)
Discussed with:	bde
2003-06-15 18:13:17 +00:00
Yaroslav Tykhiy
29ec21d1e3 Check whether the floppy type pointer has been set before trying
to access floppy parameters through it.

Note: The DIOCGSECTORSIZE and DIOCGMEDIASIZE handlers withing
fdioctl() couldn't be just moved to below the existing check
for blocking mode because fd->ft can be non-NULL while still
in non-blocking mode (fd->ft can be set with the FD_STYPE ioctl.)

PR:		kern/52338
No MFC:		Not applicable to STABLE
2003-06-15 16:18:58 +00:00
David E. O'Brien
8c9bbf484a Use __FBSDID(). 2003-06-11 00:34:37 +00:00
David E. O'Brien
006124d811 Use __FBSDID(). 2003-06-02 16:32:55 +00:00
Poul-Henning Kamp
a3e7d3f16f wrap macro in do {...} while(0) 2003-05-31 21:11:51 +00:00
Poul-Henning Kamp
670966596b Remove unused variable(s).
Found by:       FlexeLint
2003-05-31 20:29:34 +00:00
Poul-Henning Kamp
7d4220518e Remove break after return;
Found by:       FlexeLint
2003-05-31 20:24:30 +00:00
Poul-Henning Kamp
9a3454805e Don't rely on boolean expression evaluating to 1 or 0 by default.
Found by:       FlexeLint
2003-05-31 20:23:46 +00:00
Poul-Henning Kamp
30f5ad0faf Remove unused variable(s).
Mark a non-critical memoryleak with XXX comment

Found by:       FlexeLint
2003-05-31 20:21:53 +00:00
Poul-Henning Kamp
c7b24d7dcd Remove unused variable.
Found by:       FlexeLint
2003-05-31 18:45:32 +00:00
Poul-Henning Kamp
9d4b1fa40e Remove extra ';'
Found by:       FlexeLint
2003-05-31 18:37:30 +00:00
Peter Wemm
33a9fd010d Only use the pc bios stuff on i386's. I think this might even be unused
there too.
2003-05-01 04:23:15 +00:00
Peter Wemm
0eb8d2e84a Create a 'legacy' node for AMD64 as well as i386. While we'll never
have to use it since all AMD64 machines are supposed to have acpi etc,
I'm using it during development so I can avoid the acpi code for now.
Yes, this is cheating.
2003-04-30 21:41:41 +00:00
Mark Murray
51da11a27a Fix some easy, global, lint warnings. In most cases, this means
making some local variables static. In a couple of cases, this means
removing an unused variable.
2003-04-30 12:57:40 +00:00
Alexander Kabaev
104a9b7e3e Deprecate machine/limits.h in favor of new sys/limits.h.
Change all in-tree consumers to include <sys/limits.h>

Discussed on:	standards@
Partially submitted by: Craig Rodrigues <rodrigc@attbi.com>
2003-04-29 13:36:06 +00:00
Matthew N. Dodd
f7130d0977 Add a module version number. 2003-04-15 04:19:49 +00:00
Poul-Henning Kamp
891619a66d Use bioq_flush() to drain a bio queue with a specific error code.
Retain the mistake of not updating the devstat API for now.

Spell bioq_disksort() consistently with the remaining bioq_*().

#include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
Matthew N. Dodd
adbc4f03a6 Correct an argument to bus_alloc_resource(). 2003-03-25 04:34:33 +00:00
Jake Burkholder
227f9a1c58 - Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
  with PAE.
- Use this to represent physical addresses in the MI vm system and in the
  i386 pmap code.  This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
  detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by:	DARPA, Network Associates Laboratories
Discussed with:	re, phk (cdevsw change)
2003-03-25 00:07:06 +00:00
Matthew N. Dodd
b7b5ae3edb Use repo-copied files in sys/i386/bios. 2003-03-24 19:14:46 +00:00
Poul-Henning Kamp
b4b138c27f Including <sys/stdint.h> is (almost?) universally only to be able to use
%j in printfs, so put a newsted include in <sys/systm.h> where the printf
prototype lives and save everybody else the trouble.
2003-03-18 08:45:25 +00:00
Poul-Henning Kamp
8595de4aec Fix a malloc() with no legal modeflag. 2003-03-17 07:26:25 +00:00
Poul-Henning Kamp
1ecc485c1b Call devstat_start_transaction_bio() instead of devstat_start_transaction() 2003-03-15 10:50:44 +00:00
Poul-Henning Kamp
8098046099 Allocate the devstat structure with devstat_new_entry(). 2003-03-08 21:32:59 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Dag-Erling Smørgrav
521f364b80 More low-hanging fruit: kill caddr_t in calls to wakeup(9) / [mt]sleep(9). 2003-03-02 16:54:40 +00:00
Maxime Henrion
07159f9c56 Cleanup of the d_mmap_t interface.
- Get rid of the useless atop() / pmap_phys_address() detour.  The
  device mmap handlers must now give back the physical address
  without atop()'ing it.
- Don't borrow the physical address of the mapping in the returned
  int.  Now we properly pass a vm_offset_t * and expect it to be
  filled by the mmap handler when the mapping was successful.  The
  mmap handler must now return 0 when successful, any other value
  is considered as an error.  Previously, returning -1 was the only
  way to fail.  This change thus accidentally fixes some devices
  which were bogusly returning errno constants which would have been
  considered as addresses by the device pager.
- Garbage collect the poorly named pmap_phys_address() now that it's
  no longer used.
- Convert all the d_mmap_t consumers to the new API.

I'm still not sure wheter we need a __FreeBSD_version bump for this,
since and we didn't guarantee API/ABI stability until 5.1-RELEASE.

Discussed with:		alc, phk, jake
Reviewed by:		peter
Compile-tested on:	LINT (i386), GENERIC (alpha and sparc64)
Runtime-tested on:	i386
2003-02-25 03:21:22 +00:00
Poul-Henning Kamp
70d8e2e9aa Switch to using the TSC code in i386/i386/tsc.c. 2003-02-11 11:43:25 +00:00
Poul-Henning Kamp
91f1c2b3cc Split the global timezone structure into two integer fields to
prevent the compiler from optimizing assignments into byte-copy
operations which might make access to the individual fields non-atomic.

Use the individual fields throughout, and don't bother locking them with
Giant: it is no longer needed.

Inspired by:    tjr
2003-02-03 19:49:35 +00:00
Jake Burkholder
238dd3209a Split statclock into statclock and profclock, and made the method for driving
statclock based on profhz when profiling is enabled MD, since most platforms
don't use this anyway.  This removes the need for statclock_process, whose
only purpose was to subdivide profhz, and gets the profiling clock running
outside of sched_lock on platforms that implement suswintr.
Also changed the interface for starting and stopping the profiling clock to
do just that, instead of changing the rate of statclock, since they can now
be separate.

Reviewed by:	jhb, tmm
Tested on:	i386, sparc64
2003-02-03 17:53:15 +00:00
Yoshihiro Takahashi
afb79ecedd Correct error message. 2003-02-02 13:06:18 +00:00
Poul-Henning Kamp
3c99c0bc50 Make tsc_freq a 64bit quantity.
Inspired by:    http://www.theinquirer.net/?article=7481
2003-01-29 11:36:39 +00:00
Marcel Moolenaar
19ad245042 YAM: This id is found in a Sony Vaio GRX-670. When will this end?
Submitted by: Chuck McCrobie <mccrobie2000@yahoo.com>
2003-01-22 22:02:09 +00:00
Jeffrey Hsu
033aebebc4 Add yet another Sony Vaio PS/2 mouse ID. This one is found on a VX88.
Submitted by:	marcel
2003-01-22 03:31:08 +00:00
Marcel Moolenaar
99fd68d987 Add yet another Sony Vaio PS/2 mouse ID. This one is found in a R505GL.
The ACPI data for the mouse includes the compatibility ID, but we
apparently don't make use of it.
2003-01-21 10:00:32 +00:00
Matthew N. Dodd
dcb65c595d Make the SC_NO_SUSPEND_VTYSWITCH kernel option available as a loader
tunable and sysctl (hw.syscons.sc_no_suspend_vtswitch).
2003-01-15 03:45:27 +00:00
Matthew N. Dodd
6dc61b5ae5 - GC a few more hand-rolled 'abs' macros.
- GC a few hand-rolled min()/max() macros while I'm here.
2003-01-15 02:15:57 +00:00
Joerg Wunsch
294d88444b Bail out of fd_clone() if the parsed unit number doesn't match our
expectation.

This solves the problem, where in a constellation with two (or more)
drives, an attempt is made to access a device name for that device
using a historic partition letter, like /dev/fd1c.  This is supposed
to create a symlink to the master device, but previously, the link was
always created to /dev/fd0, even if the request was for fd1*.
2003-01-11 20:10:41 +00:00
Poul-Henning Kamp
2b64426519 Remove calls to cdevsw_add(), they are dreprecated on this branch now. 2002-12-28 21:39:04 +00:00
Poul-Henning Kamp
92a306a2b6 Use the correct value when writing the Day Of Week byte in the CMOS.
The correct range is [1...7] with Sunday=1, but we have been writing
[0...6] with Sunday=0.

The Soekris computers flagged the zero, zapped the date, so if you
rebooted your soekris on a sunday, it would come up with a wrong
date.

Bruce has a more extensive rework of this code, but we will stick with
the minimalist fix for now.

Spotted by:	Soren Kristensen <soren@soekris.com>
Thanks to:	Michael Sierchio <kudzu@tenebras.com>.
Confirmed by:	bde
Approved by:	re
2002-12-04 13:46:49 +00:00
Maxime Henrion
2ac8c61ac4 Capitalize the first letter of device descriptions
for consistency with the rest of the drivers.
2002-11-11 15:26:08 +00:00
John Baldwin
fbfed1cf09 Fix compile with options SC_NO_SUSPEND_VTYSWITCH. 2002-10-17 16:09:13 +00:00
Mitsuru IWASAKI
0ebefa8c4e 1. Fix a comment. Locking _is_ needed (but not done).
2. Update a comment.  We now restore much more than RTC updates and
   interrupts.
3. Order change.  Stop interrupts by writing to RTC_STATUSB,
   restore rate bits for the interrupts by writing to RTC_STATUSA,
   then enable interrupts again.
   This seems to be done perfectly backwards in startrtclock().
   Otherwise, the idea for this change was obtained from
   startrtclock().
4. Don't stop the clock (RTCB_HALT).  We only program some control bits
   and don't want to stop the clock.
5. (Not really related.)  Add caveats to the comment about timer_restore().
   The update is non-atomic since locking is not done.

On locking:
6. rtcin() and writertc() are locked() adequately by splhigh() in RELENG_4,
   but this locking is null in -current.
7. Doing things in the correct order in (3) combined with (6) is probably
   enough locking for rtcrestore() in RELENG_4.  In -current, the
   writertc()'s race with rtcintr() unless the BIOS disables RTC interrupts.

Submitted by:	bde (including commit message)
MFC after:	1 week
2002-10-17 13:55:39 +00:00
Mitsuru IWASAKI
c42946c4c1 Add new syscons option SC_NO_SUSPEND_VTYSWITCH.
This disables vty switch during suspend/resume.
2002-10-17 07:04:31 +00:00
Poul-Henning Kamp
8b7f9bdcdf Put an XXX: comment here to point out a couple of free() issues on
pnp_read_bytes().

Spotted by:	FlexeLint
2002-10-16 10:40:43 +00:00
Poul-Henning Kamp
633eb1fc9e No need to declare M_ISADEV here.
Spotted by:	FlexeLint.
2002-10-16 10:38:48 +00:00
Poul-Henning Kamp
6dbb527e47 Properly put macro args in ().
Spotted by:	FlexeLint.
2002-10-16 09:07:30 +00:00
John Baldwin
63e30378bc - Use __BUS_ACCESSOR() to define the ISA ivar accessor functions instead of
homerolling our own version.
- Rename the enum for memsize from ISA_IVAR_MSIZE to ISA_IVAR_MEMSIZE
  since using 'MSIZE' in the macro invocation of ISA_ACCESSOR() conflicts
  with the 'MSIZE' kernel option.  The accessor function is still
  isa_get_msize().
2002-10-15 00:02:51 +00:00
Poul-Henning Kamp
42117b6c4d Fix a probably rare and inconsequential memory leak.
Spotted by:	FlexeLint
2002-10-02 20:29:54 +00:00
Poul-Henning Kamp
c91a63aa2c Add support for DIOCGMEDIASIZE and DIOCGSECTORSIZE.
Remove all traces of disklabel.

Sponsored by:	DARPA & NAI Labs.
2002-09-30 13:53:22 +00:00
Poul-Henning Kamp
419f39ce0f Prefix private BIO commands with "FD" so people get a hint that they
are in fact private.

Sponsored by:	DARPA & NAI Labs.
2002-09-30 13:42:06 +00:00
Poul-Henning Kamp
f46708e081 Don't leak memory in case device_add_child_ordered() returns NULL.
Found by:	FlexeLint
2002-09-30 07:56:12 +00:00
Yoshihiro Takahashi
7698537b29 Added some buggy PC-98 PnP cards support. 2002-09-29 13:31:26 +00:00
Poul-Henning Kamp
37c841831f Be consistent about "static" functions: if the function is marked
static in its prototype, mark it static at the definition too.

Inspired by:    FlexeLint warning #512
2002-09-28 17:15:38 +00:00
John Baldwin
c1e309b38b Argh, isa(4), eisa(4) and mca(4) now attach to legacy(4) instead of
nexus(4) in the case of machines w/o equivalent bridges on a PCI bus.

Reported by:	winter
Pointy hat to:	jhb
2002-09-26 18:40:06 +00:00
Poul-Henning Kamp
bc8c3c3e37 Fix a 3 year old oversight: Remove the #ifdef/#endif pair now that there
is nothing between them anymore.

Spotted by:	peter.
2002-09-21 07:59:06 +00:00
Poul-Henning Kamp
f90c382c0c Make FreeBSD "struct disklabel" agnostic, step 311 of 723:
Rename diskerr() to disk_err() for naming consistency.

Drop the by now entirely useless struct disklabel argument.

Add a flag argument for new-line termination.

Fix a couple of printf-format-casts to %j instead of %l.

Correctly print the name of all bio commands.

Move the function from subr_disklabel.c to subr_disk.c,
and from <sys/disklabel.h> to <sys/disk.h>.

Use the new disk_err() throughout, #include <sys/disk.h> as needed.

Bump __FreeBSD_version for the sake of the aac disk drivers #ifdefs.

Remove unused disklabel members of softc for aac, amr and mlx, which seem
to originally have been intended for diskerr() use, but which only rotted
and got Copy&Pasted at least two times to many.

Sponsored by:   DARPA & NAI Labs.
2002-09-20 12:52:03 +00:00
Mitsuru IWASAKI
076ef4620b Restore status register A of RTC at resume time.
This should fix the 'too many RTC interrupts and statclock seems
broken after resume' problem.

MFC after:	1 week
2002-09-18 07:34:04 +00:00
Poul-Henning Kamp
c3bdb2f779 Suitably shrink a comment so it applies again.
Submitted by:	bde
2002-09-15 21:25:55 +00:00
Poul-Henning Kamp
02aad38c79 Fix a bug were a struct bio was freed and certain members subsequently
examined.  Use biowait() instead of DIY.
2002-09-13 11:37:38 +00:00
Joerg Wunsch
9a5e3ddb2d Pass the physical instead of the logical block number in
bp->bio_pblkno.  Otherwise, all formats not using 512 byte
physical sectors got screwed.
2002-09-12 20:53:50 +00:00
Mitsuru IWASAKI
9c4d34df76 Add suspend/resume method to syscons. This switch the mode
(text <-> graphics) by changing current vty during ACPI
sleep/wakeup (maybe APM also).
2002-08-25 18:35:44 +00:00
Philippe Charnier
93b0017f88 Replace various spelling with FALLTHROUGH which is lint()able 2002-08-25 13:23:09 +00:00
Mark Peek
5e3939b59b Clock frequencies reported by sysctl should be unsigned values. Discovered
when machdep.tsc_freq returned a negative number on a 2.2GHz Xeon.

Submitted by:	Brian Harrison <bharrison@ironport.com>
Reviewed by:	phk
MFC after:	1 week
2002-06-22 16:30:18 +00:00
Joerg Wunsch
a2642c4d67 After some comments from bde, rewrite the loops to avoid turning the
previously used "micro-optimization" (count-down loop) into a
pessimization.  Now the loops are written in the more natural count-up
form.

Also, while being there, i made the logic in out_fdc() similar to the
logic in in_fdc().  The old implementation was a bit bogus anyway
since it first tested the DIO bit and only afterwards the RQM bit.
However, according to the description of the i82077, the DIO bit is
only guaranteed to be valid once the RQM bit is set.  Thus, the old
implementatoin would have had the chance to misbehave on a controller
that is implemented in accordance with the i82077 description (but is
not bug-for-bug compatible).

MFC after:	3 days
2002-05-14 21:28:45 +00:00
Joerg Wunsch
8a0ba81859 style(9) changes before further editing that region:
. add unnecessary parenthesis around return values
. put body of an "if" statement onto a line of its own
2002-05-13 10:28:20 +00:00
Joerg Wunsch
5613959d84 Hide the fd autoselection messages behind the bootverbose case so they
stop bothering people on their consoles.
2002-05-12 17:17:46 +00:00
Joerg Wunsch
cb38bb6c36 Increase the PIO timeout to approximately the value it used to have
before rev 1.229 (~ 100 ms).  According to bde, some (old) broken
hardware could require it.  In order to make timing more accurate than
what could be achieved with a loop around DELAY(1), increase loop
timing after the initial ~ 1 ms.

Also, move the declaration of FDSTS_TIMEOUT out from fdreg.h into fd.c
where it actually belongs to.

MFC after:	2 days
2002-05-12 15:24:21 +00:00
Joerg Wunsch
d0900d6bc0 Change the PIO loops from a hard counter into a loop that calls DELAY()
in each cycle, with a tunable max cycle count defined in fdreg.h.

This is said to fix the problem on some Compaq hardware (and perhaps
on other machines using the Natsemi PC87317 chip) where the fdc(4)
driver failed to operate at all.

PR:		kern/21397
Submitted by:	Jung-uk Kim <jkim@niksun.com>
MFC after:	3 days
2002-05-10 17:56:39 +00:00
Poul-Henning Kamp
2266fe776e Don't export timecounter structures under debug. with sysctl, they
contain no truly interesting data anymore.
2002-04-30 19:34:31 +00:00
Poul-Henning Kamp
7e2d76ff05 Remove the tc_update() function. Any frequency change to the
timecounter will be used starting at the next second, which is
good enough for sysctl purposes.  If better adjustment is needed
the NTP PLL should be used.
2002-04-26 10:06:26 +00:00
Poul-Henning Kamp
2ce7d7a033 GC various bits and pieces of USERCONFIG from all over the place. 2002-04-09 11:18:46 +00:00
Joerg Wunsch
84954bb898 When reading a UFS-style label from a floppy, don't attempt to use a
"raw partition" of any kind since the floppy driver doesn't support
UFS-style partitions at all.

Reported by:	"Crist J. Clark" <crist.clark@attbi.com>
Reviewed by:	bde
MFC after:	3 days
2002-04-02 18:29:43 +00:00
John Baldwin
44731cab3b Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API.  The entire API now consists of two functions
similar to the pre-KSE API.  The suser() function takes a thread pointer
as its only argument.  The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0.  The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on:	smp@
2002-04-01 21:31:13 +00:00
Matthew Dillon
d74ac6819b Compromise for critical*()/cpu_critical*() recommit. Cleanup the interrupt
disablement assumptions in kern_fork.c by adding another API call,
cpu_critical_fork_exit().  Cleanup the td_savecrit field by moving it
from MI to MD.  Temporarily move cpu_critical*() from <arch>/include/cpufunc.h
to <arch>/<arch>/critical.c (stage-2 will clean this up).

Implement interrupt deferral for i386 that allows interrupts to remain
enabled inside critical sections.  This also fixes an IPI interlock bug,
and requires uses of icu_lock to be enclosed in a true interrupt disablement.

This is the stage-1 commit.  Stage-2 will occur after stage-1 has stabilized,
and will move cpu_critical*() into its own header file(s) + other things.
This commit may break non-i386 architectures in trivial ways.  This should
be temporary.

Reviewed by:	core
Approved by:	core
2002-03-27 05:39:23 +00:00
Poul-Henning Kamp
d306122d60 Push BIO_FORMAT into a local hack inside the floppy drivers where
it belongs.
2002-03-26 19:16:37 +00:00
Nicolas Souchu
ddd22fb7fb Restore the original copyright 2002-03-23 15:36:13 +00:00
Alfred Perlstein
89c9a48352 Remove __P. 2002-03-20 07:51:46 +00:00
Alfred Perlstein
14e10f9952 Remove __P. 2002-03-20 05:14:42 +00:00
Alfred Perlstein
85f190e4d1 Fixes to make select/poll mpsafe.
Problem:
  selwakeup required calling pfind which would cause lock order
  reversals with the allproc_lock and the per-process filedesc lock.
Solution:
  Instead of recording the pid of the select()'ing process into the
  selinfo structure, actually record a pointer to the thread.  To
  avoid dereferencing a bad address all the selinfo structures that
  are in use by a thread are kept in a list hung off the thread
  (protected by sellock).  When a selwakeup occurs the selinfo is
  removed from that threads list, it is also removed on the way out
  of select or poll where the thread will traverse its list removing
  all the selinfos from its own list.

Problem:
  Previously the PROC_LOCK was used to provide the mutual exclusion
  needed to ensure proper locking, this couldn't work because there
  was a single condvar used for select and poll and condvars can
  only be used with a single mutex.
Solution:
  Introduce a global mutex 'sellock' which is used to provide mutual
  exclusion when recording events to wait on as well as performing
  notification when an event occurs.

Interesting note:
  schedlock is required to manipulate the per-thread TDF_SELECT
  flag, however if given its own field it would not need schedlock,
  also because TDF_SELECT is only manipulated under sellock one
  doesn't actually use schedlock for syncronization, only to protect
  against corruption.

Proc locks are no longer used in select/poll.

Portions contributed by: davidc
2002-03-14 01:32:30 +00:00
Takanori Watanabe
03b8237df8 Add SONY VAIO psm controller ISA-PnP ID. 2002-03-10 12:22:17 +00:00
Matthew Dillon
181df8c9d4 revert last commit temporarily due to whining on the lists. 2002-02-26 20:33:41 +00:00
Matthew Dillon
f96ad4c223 STAGE-1 of 3 commit - allow (but do not require) interrupts to remain
enabled in critical sections and streamline critical_enter() and
critical_exit().

This commit allows an architecture to leave interrupts enabled inside
critical sections if it so wishes.  Architectures that do not wish to do
this are not effected by this change.

This commit implements the feature for the I386 architecture and provides
a sysctl, debug.critical_mode, which defaults to 1 (use the feature).  For
now you can turn the sysctl on and off at any time in order to test the
architectural changes or track down bugs.

This commit is just the first stage.  Some areas of the code, specifically
the MACHINE_CRITICAL_ENTER #ifdef'd code, is strictly temporary and will
be cleaned up in the STAGE-2 commit when the critical_*() functions are
moved entirely into MD files.

The following changes have been made:

	* critical_enter() and critical_exit() for I386 now simply increment
	  and decrement curthread->td_critnest.  They no longer disable
	  hard interrupts.  When critical_exit() decrements the counter to
	  0 it effectively calls a routine to deal with whatever interrupts
	  were deferred during the time the code was operating in a critical
	  section.

	  Other architectures are unaffected.

	* fork_exit() has been conditionalized to remove MD assumptions for
	  the new code.  Old code will still use the old MD assumptions
	  in regards to hard interrupt disablement.  In STAGE-2 this will
	  be turned into a subroutine call into MD code rather then hardcoded
	  in MI code.

	  The new code places the burden of entering the critical section
	  in the trampoline code where it belongs.

	* I386: interrupts are now enabled while we are in a critical section.
	  The interrupt vector code has been adjusted to deal with the fact.
	  If it detects that we are in a critical section it currently defers
	  the interrupt by adding the appropriate bit to an interrupt mask.

	* In order to accomplish the deferral, icu_lock is required.  This
	  is i386-specific.  Thus icu_lock can only be obtained by mainline
	  i386 code while interrupts are hard disabled.  This change has been
	  made.

	* Because interrupts may or may not be hard disabled during a
	  context switch, cpu_switch() can no longer simply assume that
	  PSL_I will be in a consistent state.  Therefore, it now saves and
	  restores eflags.

	* FAST INTERRUPT PROVISION.  Fast interrupts are currently deferred.
	  The intention is to eventually allow them to operate either while
	  we are in a critical section or, if we are able to restrict the
	  use of sched_lock, while we are not holding the sched_lock.

	* ICU and APIC vector assembly for I386 cleaned up.  The ICU code
	  has been cleaned up to match the APIC code in regards to format
	  and macro availability.  Additionally, the code has been adjusted
	  to deal with deferred interrupts.

	* Deferred interrupts use a per-cpu boolean int_pending, and
	  masks ipending, spending, and fpending.  Being per-cpu variables
	  it is not currently necessary to lock; bus cycles modifying them.

	  Note that the same mechanism will enable preemption to be
	  incorporated as a true software interrupt without having to
	  further hack up the critical nesting code.

	* Note: the old critical_enter() code in kern/kern_switch.c is
	  currently #ifdef to be compatible with both the old and new
	  methodology.  In STAGE-2 it will be moved entirely to MD code.

Performance issues:

	One of the purposes of this commit is to enhance critical section
	performance, specifically to greatly reduce bus overhead to allow
	the critical section code to be used to protect per-cpu caches.
	These caches, such as Jeff's slab allocator work, can potentially
	operate very quickly making the effective savings of the new
	critical section code's performance very significant.

	The second purpose of this commit is to allow architectures to
	enable certain interrupts while in a critical section.  Specifically,
	the intention is to eventually allow certain FAST interrupts to
	operate rather then defer.

	The third purpose of this commit is to begin to clean up the
	critical_enter()/critical_exit()/cpu_critical_enter()/
	cpu_critical_exit() API which currently has serious cross pollution
	in MI code (in fork_exit() and ast() for example).

	The fourth purpose of this commit is to provide a framework that
	allows kernel-preempting software interrupts to be implemented
	cleanly.  This is currently used for two forward interrupts in I386.
	Other architectures will have the choice of using this infrastructure
	or building the functionality directly into critical_enter()/
	critical_exit().

	Finally, this commit is designed to greatly improve the flexibility
	of various architectures to manage critical section handling,
	software interrupts, preemption, and other highly integrated
	architecture-specific details.
2002-02-26 17:06:21 +00:00
Alfred Perlstein
0077e8223b Fix style bugs:
Missing `const' qualifier.
Initialization in declaration.

Submitted by: mike
2002-02-24 23:24:01 +00:00
Alfred Perlstein
b2e4739f7e Give a little more information as to why pnp configuration of a device
may have failed.

Submitted by: Terry Lambert <tlambert2@mindspring.com>
2002-02-24 22:27:54 +00:00
Poul-Henning Kamp
817988be19 Disksort will not "munge" requests, BIO_ORDERED or not, so remove
use of BIO_ORDERED.
2002-02-22 09:14:06 +00:00
Seigo Tanimura
38b968c3a5 - Do not hang if the resource allocation fails.
- Add another quirk entry of SB AWE64.

PR:		kern/32530
Submitted by:	Magnus Backstrom <b@etek.chalmers.se>
2002-02-05 06:52:56 +00:00
Bruce Evans
586079cc26 Don't include <isa/isavar.h> or compile code depending on it when isa
is not configured.  Including <isa/isavar.h> when it is not used is
harmful as well as bogus, since it includes "isa_if.h" which is not
generated when isa is not configured.

This was fixed in 1999 but was broken by unconditionalizing PNPBIOS.
2002-01-30 12:41:12 +00:00
Thomas Moestl
01f1aed259 Use the new resource_list_print_type() function.
Pass the bus device to isa_init() (this is needed for the sparc64
version).
2001-12-21 21:54:56 +00:00
John Baldwin
98f9879242 Introduce a standard name for the lock protecting an interrupt controller
and it's associated state variables: icu_lock with the name "icu".  This
renames the imen_mtx for x86 SMP, but also uses the lock to protect
access to the 8259 PIC on x86 UP.  This also adds an appropriate lock to
the various Alpha chipsets which fixes problems with Alpha SMP machines
dropping interrupts with an SMP kernel.
2001-12-20 23:48:31 +00:00
Sheldon Hearn
604fb1c032 Add another PS2 PNP id.
PR:		32973
Submitted by:	KT Sin <ktsin@acm.org>
2001-12-19 13:32:21 +00:00
Joerg Wunsch
038d1bbd1a Change the test for _MACHINE_ARCH == i386 into #ifdef __i386__ since it
otherwise breaks on the Alpha arch.  I think this is wrong since i'd
actually like to probe for a PC architecture, not for a particular CPU
type.  Anyway, now it's again the way it used to be.
2001-12-18 22:16:33 +00:00
Yoshihiro Takahashi
5229d0a11d Remove PC98 code. This file is not used by PC98. 2001-12-16 05:37:22 +00:00
Joerg Wunsch
1a6bed6863 Long promised major enhancement set for the floppy disk driver:
. The main device node now supports automatic density selection for
  commonly used media densities.  So you can stuff your 1.44 MB and
  720 KB media into your drive and just access /dev/fd0, no questions
  asked.  It's all that easy, isn't it? :)

. Device density handling has been completely overhauled.  The old way
  of hardwired kernel density knowledge is no longer there.  Instead,
  the kernel now implements 16 subdevices per drive.  The first
  subdevice uses automatic density selection, while the remaining 15
  devices are freely programmable.  They can be assigned an arbitrary
  name of the form /dev/fd[:digit]+.[:digit:]{1,4}, where the second
  number is meant to either implement device names that are mnemonic
  for their raw capacity (as it used to be), or they can alternatively
  be created as "anonymous" devices like fd0.1 through fd0.15,
  depending on the taste of the administrator.  After creating a
  subdevice, it is initialized to the maximal native density of the
  respective drive type, so it needs to be customized for other
  densities by using fdcontrol(8).  Pseudo-partition devices (fd0a
  through fd0h) are still supported as symlinks.

. The old hack to use flags 0x1 to always assume drive 0 were there is
  no longer supported; this is now supposed to be done by wiring the
  devices down from the loader via device flags.  On IA32
  architectures, the first two drives are looked up in the CMOS
  configuration records though.  On PCMCIA (i. e., the Y-E Data
  controller of the Toshiba Libretto), a single drive is always
  assumed.

. Other specialities like disabling the FIFO and not probing the drive
  at boot-time are selected by per-controller or per-drive flags, too.

. Unit attentions (media has been changed) are supposed to be detected
  now; density autoselection only occurs after a unit attention.  (Can
  be turned off by a per-drive flag, this will cause each Fdopen() to
  perform the autoselection.)

. FM floppies can be handled now (on controllers that actually support
  it -- not all do these days).

. Fdopen() can be told to avoid density selection by setting
  O_NONBLOCK; this leaves the descriptor in a half-opened state where
  only a few ioctls are accepted.  This is necessary to run fdformat
  on a device that uses automatic density selection (since you cannot
  autoselect on an unformatted medium, obviously).

. Just differentiate between a plain old NE765 and the enhanced chips,
  but don't try more; the existing code was wrong and only misdetected
  the chips anyway.

BUGS and TODOs:

. All documentation update still needs to be done.

. Formatting not-so-standard format yields unpredictable results; i
  have yet to figure out why this happens.  "Standard" formats like
  720 and 1440 KB do work, however.

. rc scripts are needed to setup device nodes with nonstandard
  densities (like the old /dev/fdN.MMM we used to have).

. Obtaining device flags from the kernel environment doesn't work yet,
  thus currently only drives that are present in (IA32) CMOS are
  really detected.  Someone who knows the odds and ends about device
  flags is needed here, i can't figure out what i'm doing wrong.

. 2.88 MB still needs to be done.
2001-12-15 19:09:04 +00:00
David E. O'Brien
6e551fb628 Update to C99, s/__FUNCTION__/__func__/,
also don't use ANSI string concatenation.
2001-12-10 08:09:49 +00:00
Warner Losh
c74f37cea7 Moved to dev/joy 2001-12-05 09:10:47 +00:00
Mitsuru IWASAKI
f9390180fe Some fix for the recent apm module changes.
- Now that apm loadable module can inform its existence to other kernel
   components  (e.g. i386/isa/clock.c:startrtclock()'s TCS hack).
 - Exchange priority of SI_SUB_CPU and SI_SUB_KLD for above purpose.
 - Add simple arbitration mechanism for APM vs. ACPI.  This prevents
   the kernel enables both of them.
 - Remove obsolete `#ifdef DEV_APM' related code.
 - Add abstracted interface for Powermanagement operations.  Public apm(4)
   functions, such as apm_suspend(), should be replaced new interfaces.
   Currently only power_pm_suspend (successor of apm_suspend) is implemented.

Reviewed by:	peter, arch@ and audit@
2001-11-01 16:34:07 +00:00
Warner Losh
2ce87d3448 Break out the bus front ends into their own files. Rewrite
sio_pccard_detach to use new siodetach.  Add an extra arg to sioprobe
to tell driver to probe/not probe the device for IRQs.

This incorporates most of Bruce's review material.  I'm at a good
checkpoint, but there will be more to come based on bde's further
reviews.

Reviewed by: bde
2001-10-23 15:17:33 +00:00
Warner Losh
d75c1b4a90 First commit after a repo copy of isa/sio* -> dev/sio:
Move sio from isa/sio.c to dev/sio/sio.c.  The next step is to break
out the front end attachments, improve support for these parts on
different busses, and maybe, if we're lucky, merging in pc98 support.
It will also be MI and live in conf/files rather than files.*.

Approved by: bde
Tested with: i386, pc98
2001-10-22 02:48:38 +00:00
John Baldwin
76e296aa31 - Make the sio_inited handling more properly MP safe.
- If we are booting with a serial console, then pass the MTX_QUIET flag to
  mtx_init of the sio lock as otherwise KTR_VERBOSE simply doesn't work.
2001-10-20 03:32:33 +00:00
Kazutaka YOKOTA
8166ba27bd Hack for the "out-of-sync" error.
- Count the number of this error.
- When the error is detected for the first time, the psm driver will
  throw few data bytes (up to entire packet size) and see if it can
  get back to sync.
- If the error still persists, the psm driver disable/enable the mouse
  and see if it works.
- If the error still persists and the count goes up to 20,
  the psm driver reset and reinitialize the mouse. The counter
  is reset to zero.
- It also discards an incomplete data packet when the interval
  between two consequtive bytes are longer than pre-defined timeout
  (2 seconds).  The last byte which arrived late will be regarded as
  the first byte of a new packet.  This is louie's idea.

You may see the following error logs during the above operations:

  "psmintr: delay too long; resetting byte count"
  "psmintr: out of sync (%04x != %04x)"
  "psmintr: discard a byte (%d)"
  "psmintr: re-enable the mouse"
  "psmintr: reset the mouse"

MFC after:	1 month
2001-10-13 10:28:02 +00:00
Robert Drehmel
1e8ff53804 Remove an unneeded variable declaration and statement.
Approved by:	jake
2001-10-09 16:06:28 +00:00
Takanori Watanabe
c84f2b288e Add PnP ID 'IBM3781' for TP240 mouse. 2001-10-03 07:26:28 +00:00
Jonathan Lemon
750c427849 Add support for 28800 baud to sio.
PR: 30906
Submitted by: "Daniel O'Connor" <darius@chowder.dons.net.au>
2001-09-29 04:49:11 +00:00
Jonathan Lemon
3a163803b7 Gate low level console output on mtx_lock_spin(&sio_lock), if the
sio_lock has been initialized.  This prevents the low level console
output (kernel printf) from clobbering the sio settings if the system
happens to be in the middle of comstart().
2001-09-27 17:00:25 +00:00
Kazutaka YOKOTA
d4b248f23e Yet another turn of workaround for psm/ACPI/PnP BIOS
problems currently experienced in -CURRENT.

This should fix the problem that the PS/2 mouse is detected
twice if the acpi module is not loaded on some systems.
2001-09-25 16:59:28 +00:00
Kazutaka YOKOTA
275658afcc Reinitialize the keyboard after the ACPI resume event.
I am not sure if this is absolutely necessary on all systems.  Yet,
there certainly are motherboards and notebook systems which require
this, although there are other systems which just don't.  I hope we
shall know when to do this on which systems, as the development of our
ACPI subsystem progresses...  (I know we didn't need this for the APM
resume.)
2001-09-23 08:42:06 +00:00
Doug Rabson
8beffae7be Tweak so I can use a serial console on ia64. 2001-09-22 19:44:37 +00:00
Murray Stokely
0aef0b4d6b Recognize two cheap PCI 16550 devices :
CyberSerial (1-port) 16550
  Oxford Semiconductor Dual Port 16550

Sort the list of PCI devices while I'm here.
2001-09-16 11:14:56 +00:00
Kazutaka YOKOTA
d117cb4e19 Handle "identifier strings" right. Each ISA PnP card must have a
mandatory "card" identifier string.  A logical devices on the ISA PnP
card may optionally have a "device" identifier string. Do not confuse
them.

The "card" identifier string is assigned to a logical device as the
default description string when the device is found. (If the "card"
identifier string has not been found, use the EISA PnP ID string.
Strictly speaking, this is an error.)  We will override it when a
"device" identifier string is found later.
2001-09-15 10:18:56 +00:00
Kazutaka YOKOTA
cd6cd68d18 Refine ACPI/PnP BIOS probe/attach routines a bit.
- Add workaround for the problematic PnP BIOS which does not assign
  irq resource for the PS/2 mouse device node; if there is no irq
  assigned for the PS/2 mouse node, refer to device.hints for an
  irq number. If we still don't find an irq number in the hints
  database, use a hard-coded value.
- Delete unused ivars.
- Bit of clean up in probe/attach.
- Add PnP ID for the PS/2 mouse port on some IBM ThinkPad models.
2001-09-15 04:38:20 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Dima Dorfman
610dcffd26 Add a missing newline to an error message.
PR:		30436
Submitted by:	Joerg Lehners <Lehners@Informatik.Uni-Oldenburg.DE>
2001-09-09 14:48:52 +00:00
Kazutaka YOKOTA
ef92e4471a Update the atkbdc, atkbd, and psm drivers to probe/attach
more cleanly and consistently in all APCI, PnP BIOS, and "hint"
cases.

NOTE: this doesn't necessarily solve the problem that the PS/2
mouse is not detected after the recent ACPI update.
2001-09-06 12:09:26 +00:00
Kazutaka YOKOTA
c395939120 Rework the ISA PnP driver pnp and the PnP resource parser to fix
the following bugs.

- When constructing a resource configuration, respect the order
  in which resource descriptors are read, in order to establish
  the correct mapping between the descriptors and configuration
  registers.
  "Plug and Play ISA Specification, Version 1.0a", Sec 4.6.1, May 5,
  1994.  "Clarifications to the Plug and Play ISA Specification,
  Version 1.0a", Sec 6.2.1, Dec. 10, 1994.

- Do not ignore null (empty) descriptors; they are valid descriptors
  acting as filler.
  "Clarifications to the Plug and Play ISA Specification, Version 1.0a",
  Sec 6.2.1.

- Correctly set up logical device configuration registers for null
  resources.
  "Clarifications to the Plug and Play ISA Specification, Version 1.0a"

- Handle null resources properly in the resource allocator for the
  ISA bus.
2001-09-05 03:54:33 +00:00
Mitsuru IWASAKI
db2077f8e1 Reenable RTC interrupts after wakeup. Some laptops have a problem
with system statistics monitoring tools (such as systat, vmstat...)
because of stopping RTC interrupts generation.
Restore all the timers (RTC and i8254) atomically.

Reviewed by:	bde
MFC after:	1 week
2001-09-04 16:02:06 +00:00
Kazutaka YOKOTA
7abb46623b Add a new field, id_config_attr to the struct isa_device.
It will be later used to store some flags to control PnP device
configurations.
2001-09-03 09:45:41 +00:00
Murray Stokely
b64e68c520 Add ID for the Best Data Smart One 56SPS Voice modem.
PR:		kern/24851
Submitted by:	Daniel Rudy <dcrudy@aol.com>
2001-08-31 21:51:00 +00:00
Murray Stokely
ba5b94fef7 Correct the ID for the ALS0120 PnP Joystick. It is different from the
ALS0110.

PR:		kern/22617
Submitted by:	Mike Holling <myke@fks.bt>
2001-08-31 21:40:56 +00:00
Murray Stokely
6e66dd6b62 Add OMRON ME5614ISA PnP modem.
PR:		kern/22801
Submitted by:	Ryuzo Okada <R.Okada@mm.neweb.ne.jp>
2001-08-31 20:37:02 +00:00
Murray Stokely
4fd606bfba Add PCI device IDs for Kuotech dual port serial cards.
Also give example of the flags needed to use these cards.

PR:		kern/21242
Submitted by:	Shigeki Moride <moride@portside.net>
2001-08-31 20:16:00 +00:00
Mike Smith
5f063c7b09 Add ACPI attachments. 2001-08-30 09:17:03 +00:00
Mike Smith
2e5bbc3fed Safety-check against empty PnP ID lists. 2001-08-30 09:14:28 +00:00
Warner Losh
1865c617e4 Fix the so-called "half-baked-probe" code that I wrote a long time ago
to properly clear the interrupt register on the no error case.  Also,
set the mcr register to zero when we find we can't support the chip.

This fixes the hang on sio driver attach problem in the new pci pccard
code that some people have reported.  At least on my machine.  I'd
like to get this into 4.4.

Submitted by: bde
PR: kern/29742

MFC after: 1 day
2001-08-16 17:30:55 +00:00
Julian Elischer
3b82ede012 DO NOT ALLOCATE 2+K OBJECTS ON THE KERNEL STACK!!!!
found by: Getting my u-area overwritten
2001-08-10 07:50:14 +00:00
Kazutaka YOKOTA
764952572b Return consistent key action codes at key press and release
events. Otherwise you would see unexpected results if shift or
locking keys are defined to give different actions depending
on other shift/locking keys' state.

Please keep the ukbd module and the kernel in sync, otherwise
the USB keyboard won't work after this change.
MFC after:	10 days
2001-07-20 13:05:57 +00:00
Joerg Wunsch
3a5c2c86a8 Hrmpf. nyan's rev 1.25 commit to fdc.h crossed with my removal of it.
Back-integrate his (PC98) changes into fd.c.
2001-07-14 20:28:02 +00:00
Joerg Wunsch
246ed35d55 Yet another large non-function change.
. Integrate fdc.h into fd.c, with the removal of ft(4) there's no longer
  a reason to scatter things across two files.

. Sanitize comments.  Convert them into the style(9)-recommended
  multi-line form, make them sentences where apprpriate, etc.

. Declare all functions on top, and declare them in the order they
  appear in the file.  This order is totally chaotic, but Bruce
  convinced me that reordering the file wouldn't make it better either.

. Kill a `possibly uninitialized' warning (only seen with -O2) in
  fd_read_status().

. Make the comments at return (0|1) statements in fdstate() consistent.

. Nuke a ``keep the compiler happy'' dummy return at the end of fdstate(),
  gcc is smart enough to detect that it would never be reached anyway.
2001-07-14 20:25:01 +00:00
Yoshihiro Takahashi
77663c3006 - Refine pc98 supports.
- Use bus_space stuff.
- Rename FDO_* -> FDC_* (obtained from NetBSD/pc98)
2001-07-14 04:19:09 +00:00
Joerg Wunsch
0e17a5bcdb Log when the user is turning debugging on/off.
Also sanitize the TRACE* macros a bit so they syntactically behave like
single C statements (even inside in `if' statement).

Submitted by:	des
2001-07-09 21:11:10 +00:00
Joerg Wunsch
5d54fe9172 Hmpf, remove two variables that got unused by rev 1.214. 2001-07-09 21:00:02 +00:00
Joerg Wunsch
83edbfa5ff Ouch, calculate correctly. With 300 rpm and 25 retries, it's 5 seconds
till timeout.
2001-07-09 20:53:19 +00:00
Joerg Wunsch
e3b525a006 Remove parts of rev 1.211 again: do not delete our children iff they
haven't been probed successfully.  It's a known bug that ISA hints
processing instantiates those devices, and prematurely killing them
has other unwanted side-effects.
2001-07-09 20:50:41 +00:00
Joerg Wunsch
3fef646ef0 As des' example shows us, DMA overruns could happen in a situation
where they will never succeed.  Add a stop-gap measure that will at
least eventually timeout the operation instead of retrying it
indefinately.

MFC after:	1 month
2001-07-09 20:46:45 +00:00
Joerg Wunsch
fb35bd37f2 Another large patchset from Bruce.
Despite of a few cosmetic things like adding ``irritating silly
parentheses'' around all return values, this mainly improves FDC reset
handling by no longer gratuitously resetting the FDC all the time
(which causes it to lose the notion of the current track) but only in
case of errors, and it sanitizes the block and offset calculations in
fdstrategy() and fdstate().  Some additional cleanup added by me, in
particular the large switch in fdstate() now always uses return to
break out, and no branch falls off the end of the switch statement
anymore.  Per Bruce's suggestion, removed M_NOWAIT from the malloc()s
to simplify things.

Submitted by:	bde (mostly)
2001-07-08 20:50:20 +00:00
Joerg Wunsch
6044485346 More cleanup when detaching. Clone device entries will now be
destroyed properly (otherwise bad things would happen after a clone
dev had been created, and the module was kldunloaded).  Allocated
children that have not successfully probed are being deleted again
(otherwise fd0 and fd1 have always been allocated, even if only
fd0 was acutally present, and fd1 even survived kldunloading the
module).

Still, kldunloading leaves remnants of the previously existing devices
intact.  Why doesn't it destroy all the devices?  As a consequence,
since dev->descr now points into no longer allocated memory, the
system panics deep inside printf(9) when running devinfo(1) after
kldunloading the module.  Ideas sought...

Also, when kldloading the module on a hints-populated isab0, this bus
somehow has already created an fdc0 entry (a dummy) so the load
attempt fails and will register fdc1 instead.  What are those dummy
entries for?  Loading the module from the bootloader works, and it
can be unloaded an re-loaded then later.
2001-07-04 22:10:33 +00:00
Kazutaka YOKOTA
fa783074ac Remove the resume method. It is not necessary any more, because
keyboard drivers have it now...
MFC after:	4 weeks
2001-06-30 10:15:13 +00:00
Kazutaka YOKOTA
6c726162da Add the device resume method to keyboard drivers.
MFC after:	4 weeks
2001-06-30 10:02:32 +00:00
Joerg Wunsch
f664aeee49 Use the new-born BIO_CMD1 instead of fudging a bio_flag value for reading
the sector ID.

Based on numerous comments made by Bruce, rewrite a good part of the
old fdformat() function, and merge it with fdreadid() into a single
unified fdmisccmd() function.  Various style and a couple of more
serious bugs fixed there.

While i was at it, i also fixed the long-standing "TODO: don't
allocate buffer on stack." in fdcioctl(), fixed a number of style bugs
there, and finally implemented the FD_DEBUG ioctl command that has
been advertised in <sys/fdcio.h> (formerly <machine/ioctl_fd.h>) for
almost seven years now. ;-)

Submitted by:	bde (a lot of fixes for fdformat())
2001-06-29 15:30:48 +00:00
Joerg Wunsch
5f431174f3 This change slipped through hidden in a CVS conflict. Logically belongs
to the previous commit (fix resource deallocation).
2001-06-29 07:53:45 +00:00
Joerg Wunsch
e219897a2a First stab at fixing resource deallocation, and implementing fdc(4) as
a KLD.  Still doesn't work well except in the PCMCIA case (now if only
pccardd(8) could load and unload drivers dynamically...).  Mainly, it
tries to find fdc0 on the PCI bus for whatever obscure reasons, but i
need someone who understands driver(9) to fix this.  However, it's at least
already better than before, and i'm tired of maintaining too many private
changes in my tree, given the large patches bde submitted. :)

Idea of a KLD triggered by:	Michael Reifenberger <root@nihil.plaut.de>
2001-06-29 07:36:29 +00:00
Joerg Wunsch
64860614a4 Merge in parts of a larger patchset i received from Bruce. Untested
by now (except of a compile test), but i believe this to contain no
actual functional changes.

. Fix the copyright of the Regents i accidentally broke in rev 1.197
  (although only a very small part of the original driver survived
  at all...).

. Bump MAX_CYLINDER since some obscure formats really use more than 80
  cylinders.

. Correctly handle BIO_FORMAT which used to be a bitmask but is now a BIO
  command of its own.

. Numerous stylistic fixes.

Submitted by:	bde
2001-06-28 12:35:28 +00:00
Joerg Wunsch
250300ebb0 Implement a new ioctl command for floppies: FD_READID
Reads one sector ID field from a given track.  Useful for analyzing
floppies.
2001-06-26 22:16:30 +00:00
Joerg Wunsch
4c34deeecf Some more cosmetics: kill another couple of K&R function definitions
that survived from old days, fix style of return type in fdcpio(),
kill old Emacs hints that are no longer working that way anyway.
2001-06-26 22:07:25 +00:00
Nicolas Souchu
3ae3f8b0be Convert inb/outb to bus_space.
Submitted by:	jcm@FreeBSD-uk.eu.org
2001-06-23 06:52:54 +00:00
Joerg Wunsch
80909a7db8 Cosmetics:
. staticize out_fdc(), there's no longer an ft(4) driver sharing its use
. remove in_fdc(), has been used by ft(4) last time, long since obsoleted
  by fd_in()
. move the declaration of fd_clone() to where most of the other function
  declarations are
. de-__P()ify fd_clone(), it's been the only _P()ed function in the
  entire file
2001-06-20 20:21:55 +00:00
Ian Dowse
11fbe665c0 The serial console break-to-debugger support only functioned while
the console device was open. At other times, the interrupts that
are used to detect the break signal or ~^B sequence were disabled,
so these events would not be noticed until the next open (e.g. the
next kernel printf). This was mainly a problem while there was no
getty running on the console, such as during bootup or shutdown.

For serial consoles with break-to-debugger support, we now enable
the generation of interrupts at attach time, and we leave them
enabled while the device is closed.

Reviewed by:	bde (I've since made chages as per his suggestions)
2001-06-20 16:47:23 +00:00
Peter Wemm
c864c67bad Fix warning:
163: passing arg 4 of `resource_string_value' from incompatible pointer type
2001-06-15 08:01:21 +00:00
Peter Wemm
2398f0cd1d Hints overhaul:
- Replace some very poorly thought out API hacks that should have been
  fixed a long while ago.
- Provide some much more flexible search functions (resource_find_*())
- Use strings for storage instead of an outgrowth of the rather
  inconvenient temporary ioconf table from config().  We already had a
  fallback to using strings before malloc/vm was running anyway.
2001-06-12 09:40:04 +00:00
Joerg Wunsch
f8ce7dd521 Cosmetics:
. remove stale comments and a stale #define (from the old days of ft(4))
. make MAX_SEC_SIZE (used in isa_dmainit()) a #define

. fix a typo in a string
. use 0 as the blocksize in devstat_add_entry(), since the actual blocksize
  is unknown (devstat(9) suggests to use 0 in that case)
2001-06-11 10:48:10 +00:00
Joerg Wunsch
e774b25111 Nuke the various poorly maintained copies of ioctl_fd.h. The file is
not machine-dependant, thus it has been moved out (repo-copied) into
<sys/fdcio.h>.
2001-06-06 06:15:03 +00:00
Joerg Wunsch
7998b1245d Make the FDC (state machine) state an enum, as opposed to an int
abusing a bunch of #defines, for clarity and better debugging support.
2001-06-05 21:01:46 +00:00
Warner Losh
53e4eaaeba Close the line displine on detach. Lots of folks have submittd this, and
I think bde even reviewed it once.

Also, change the name of ActionTEC pat to more generic Lucent Kermit
chip.  Add stub for Xircom card.  Add cardbus attachment too.
2001-06-05 05:58:57 +00:00
Joerg Wunsch
b794010414 Move out the files from src/sys/isa/ic/ to src/sys/dev/ic/, so they
can be made userland-visible as <dev/ic/...>.  Also, those files are
not supposed to contain any bus-specific details at all, so placing
them under .../isa/ has been a misnomer from the beginning.

The files in src/sys/dev/ic/ have been repo-copied from their old
location (this commit is a forced null commit there to record this
message).
2001-06-04 21:04:14 +00:00
Joerg Wunsch
06740f7b41 Fix my email address. I accidentally cut'npasted the wrong (old)
hostname laste time.
2001-06-03 20:41:21 +00:00
Warner Losh
3a4f29da1e The orm device. This device gobbles up the Option ROMs in the ISA
memory I/O space.  Otherwise, our resource allocation system might
mistakenly assign pccard, plug and play devices or other things
addresses that conflict with ROMs.

I cleaned up his code a little from the submited driver: style(9)
issues, commentary on why something that looks incorrect really is
correct.  Also noted that while a checksum field is defined for the
ROMs, enough common hardware neglects it to make it not worthwhile
checking.

Submitted by: Nikolai Saoukh <nms@otdel-1.org>
PR: 22078
2001-06-01 20:58:32 +00:00
MIHIRA Sanpei Yoshiro
882f2b2b40 add Dualmode Zoom/FaxModem 56K (internal) Model 2919
PR:		kern/27476
Submitted by:	Eric Beyer <lnxfrk@earthlink.net>
2001-05-26 11:17:57 +00:00
Poul-Henning Kamp
48c35f87be Don't lie to diskerr() now that it listens to us. 2001-05-25 09:07:23 +00:00
MIHIRA Sanpei Yoshiro
1a92411c80 Add SmartLink 5634PCV SurfRider
PR:		kern/26952
Submitted by:	Simon Dick <simond@irrelevant.org>
2001-05-20 03:12:55 +00:00
John Baldwin
8bd57f8fc2 Remove unneeded includes of sys/ipl.h and machine/ipl.h. 2001-05-15 23:22:29 +00:00
Joerg Wunsch
2995d1100c Implement a few more floppy ioctl commands and IO options, namely:
. FD_CLRERR clears the error counter, thus re-enables kernel error
  printf()s,

. FD_GSTAT obtains the last FDC operation state, if any,

. FDOPT_NOERRLOG (temporarily) turns off kernel printf() floppy
  error logging,

. FDOPT_NOERROR makes the kernel ignore an FDC error, thus can
  enable the transfer of an erroneous sector to the user application

All options are being cleared on (last) close.

Prime consumer of the last features will be fdread(1), to be committed
shortly.

(FD_CLRERR should be wired into fdcontrol(8), but then fdcontrol(8)
needs a major rewrite anyway.)
2001-05-14 20:20:11 +00:00
Poul-Henning Kamp
a468031ce8 Actually biofinish(struct bio *, struct devstat *, int error) is more general
than the bioerror().

Most of this patch is generated by scripts.
2001-05-06 20:00:03 +00:00
Mark Murray
fb919e4d5a Undo part of the tangle of having sys/lock.h and sys/mutex.h included in
other "system" header files.

Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.

Sort sys/*.h includes where possible in affected files.

OK'ed by:	bde (with reservations)
2001-05-01 08:13:21 +00:00
John Baldwin
4d4bc9acc6 Add in a missing call to forward_hardclock() in the SMP case.
Submitted by:	bde
2001-04-28 01:37:44 +00:00
John Baldwin
6caa8a1501 Overhaul of the SMP code. Several portions of the SMP kernel support have
been made machine independent and various other adjustments have been made
to support Alpha SMP.

- It splits the per-process portions of hardclock() and statclock() off
  into hardclock_process() and statclock_process() respectively.  hardclock()
  and statclock() call the *_process() functions for the current process so
  that UP systems will run as before.  For SMP systems, it is simply necessary
  to ensure that all other processors execute the *_process() functions when the
  main clock functions are triggered on one CPU by an interrupt.  For the alpha
  4100, clock interrupts are delievered in a staggered broadcast fashion, so
  we simply call hardclock/statclock on the boot CPU and call the *_process()
  functions on the secondaries.  For x86, we call statclock and hardclock as
  usual and then call forward_hardclock/statclock in the MD code to send an IPI
  to cause the AP's to execute forwared_hardclock/statclock which then call the
  *_process() functions.
- forward_signal() and forward_roundrobin() have been reworked to be MI and to
  involve less hackery.  Now the cpu doing the forward sets any flags, etc. and
  sends a very simple IPI_AST to the other cpu(s).  AST IPIs now just basically
  return so that they can execute ast() and don't bother with setting the
  astpending or needresched flags themselves.  This also removes the loop in
  forward_signal() as sched_lock closes the race condition that the loop worked
  around.
- need_resched(), resched_wanted() and clear_resched() have been changed to take
  a process to act on rather than assuming curproc so that they can be used to
  implement forward_roundrobin() as described above.
- Various other SMP variables have been moved to a MI subr_smp.c and a new
  header sys/smp.h declares MI SMP variables and API's.   The IPI API's from
  machine/ipl.h have moved to machine/smp.h which is included by sys/smp.h.
- The globaldata_register() and globaldata_find() functions as well as the
  SLIST of globaldata structures has become MI and moved into subr_smp.c.
  Also, the globaldata list is only available if SMP support is compiled in.

Reviewed by:	jake, peter
Looked over by:	eivind
2001-04-27 19:28:25 +00:00
John Baldwin
f34fa851e0 Catch up to header include changes:
- <sys/mutex.h> now requires <sys/systm.h>
- <sys/mutex.h> and <sys/sx.h> now require <sys/lock.h>
2001-03-28 09:17:56 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Yoshihiro Takahashi
0197892d6a Always call resource_int_value function for getting portsize and msize.
It was not set resource size (portsize/msize) if resource address was set.

This is MFC candidate.
2001-03-17 04:23:12 +00:00
MIHIRA Sanpei Yoshiro
6573bc0b37 Add GVC1601 - Rockwell V.34 Plug & Play Modem
PR:		kern/25204
Submitted by:	Victor Ivanov <v0rbiz@icon.bg>
2001-03-07 14:27:56 +00:00
MIHIRA Sanpei Yoshiro
ab410acc0a Add IOD0081 - I-O DATA DEVICE,INC. IFML-560
PR:		kern/25173
Submitted by:	Yohsuke Fujikawa <yohsuke@mx2.nisiq.net>
2001-03-07 14:19:55 +00:00
Mark Murray
3c36743e2d Harvest interrupt entropy off the floppy disk controller. 2001-03-03 14:53:50 +00:00
Bruce Evans
12a586bbda Fixed style bugs in clock.c rev.1.164 and cpu.h rev.1.52-1.53 -- declare
tsc_present in the right places (together with other variables of the
same linkage), and don't use messy ifdefs just to avoid exporting it in
some cases.
2001-02-19 03:00:34 +00:00
Jonathan Lemon
608a3ce62a Extend kqueue down to the device layer.
Backwards compatible approach suggested by: peter
2001-02-15 16:34:11 +00:00
Mark Murray
d888fc4e73 RIP <machine/lock.h>.
Some things needed bits of <i386/include/lock.h> - cy.c now has its
own (only) copy of the COM_(UN)LOCK() macros, and IMASK_(UN)LOCK()
has been moved to <i386/include/apic.h> (AKA <machine/apic.h>).
Reviewed by:	jhb
2001-02-11 10:44:09 +00:00
John Baldwin
5781f5419e Catch up to changes to inthand_add(). 2001-02-09 17:48:33 +00:00
John Baldwin
062d8ff5a0 - Catch up to the new swi API changes:
- Use swi_* function names.
  - Use void * to hold cookies to handlers instead of struct intrhand *.
- In sio.c, use 'driver_name' instead of "sio" as the name of the driver
  lock to minimize diffs with cy(4).
2001-02-09 17:46:35 +00:00
Bosko Milekic
9ed346bab0 Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:

mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks)
mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)

similarily, for releasing a lock, we now have:

mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN.
We change the caller interface for the two different types of locks
because the semantics are entirely different for each case, and this
makes it explicitly clear and, at the same time, it rids us of the
extra `type' argument.

The enter->lock and exit->unlock change has been made with the idea
that we're "locking data" and not "entering locked code" in mind.

Further, remove all additional "flags" previously passed to the
lock acquire/release routines with the exception of two:

MTX_QUIET and MTX_NOSWITCH

The functionality of these flags is preserved and they can be passed
to the lock/unlock routines by calling the corresponding wrappers:

mtx_{lock, unlock}_flags(lock, flag(s)) and
mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN
locks, respectively.

Re-inline some lock acq/rel code; in the sleep lock case, we only
inline the _obtain_lock()s in order to ensure that the inlined code
fits into a cache line. In the spin lock case, we inline recursion and
actually only perform a function call if we need to spin. This change
has been made with the idea that we generally tend to avoid spin locks
and that also the spin locks that we do have and are heavily used
(i.e. sched_lock) do recurse, and therefore in an effort to reduce
function call overhead for some architectures (such as alpha), we
inline recursion for this case.

Create a new malloc type for the witness code and retire from using
the M_DEV type. The new type is called M_WITNESS and is only declared
if WITNESS is enabled.

Begin cleaning up some machdep/mutex.h code - specifically updated the
"optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN
and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently
need those.

Finally, caught up to the interface changes in all sys code.

Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
Peter Wemm
8ab109d131 Remove count for NSIO. The only places it was used it were incorrect.
(alpha-gdbstub.c got sync'ed up a bit with the i386 version)
2001-01-31 10:54:45 +00:00
Peter Wemm
f444a0efe9 Convert mca (microchannel bus support) from something that we count
(bogus) to something that we test for the presence of.
2001-01-29 11:57:27 +00:00
Nicolas Souchu
c264e80fb7 Consider that the chipset may be in ECP mode (from BIOS settings)
even if mode PS/2 is forced with bootflags. As a matter of fact,
chipsets needs some extra configuration for accessing PS/2 mode
from ECP. The current patch is only relevant for generic chipsets
since specific code is supposed to deal with this during detection.
2001-01-25 10:51:41 +00:00
Jason Evans
d1c1b8413e Remove MUTEX_DECLARE() and MTX_COLD. Instead, postpone full mutex
initialization until after malloc() is safe to call, then iterate through
all mutexes and complete their initialization.

This change is necessary in order to avoid some circular bootstrapping
dependencies.
2001-01-21 07:52:20 +00:00
Peter Wemm
1467a651ab Convert apm from a bogus 'count' into a plain option. Clean out some
other cruft from the files.alpha and files.ia64 that were related to this.
2001-01-19 14:09:54 +00:00
Garrett Wollman
0a2c3d48c6 select() DKI is now in <sys/selinfo.h>. 2001-01-09 04:33:49 +00:00
Seigo Tanimura
307afaf3c6 Add OZO8008 - Zoom (33.6k Modem).
PR:		kern/23336
Submitted by:	Paulo Menezes <root@samurai.dee.uc.pt>
2000-12-26 06:52:57 +00:00
Nicolas Souchu
1afd1f9956 Fix the PR. Getting a dma channel equal to 0 remains a problem though.
PR:		i386/22568
2000-12-19 21:28:17 +00:00