- Completely recoded the ypmatch cache code. The old code could leak
memory: it would allow the cache to grow, but never
shrink. The new code imposes the following limits:
o The cache is capped at a limit of 5 entries.
o Each entry expires after five seconds, at which point
its slot is freed.
o If an insertion is to be done and all five slots
are filled, the oldest entry is forcibly expired
to release its slot.
Also, the cache is implemented on a per-binding basis rather than
having a global cache covering all bindings. This means that each
bound domain has its own 5 slot cache.
- Changed clntudp_create() to clntudp_bufcreate() so that the
xmit/recv message buffer sizes can be set explicitly. NIS transactions
are rarely much larger than 1024 bytes since YPMAXRECORD is 1024.
The defaults chosen by clntudb_create() are actually much larger
than needed. I set the xmit buffer to a little over 1024 and the
recv buffer to a little over 2048. This saves a few Kbytes for each
NIS binding.
- Add my name to the copyright. I think I've made enough changes to
this file to merit it. :)
Note: these changes should go into the 2.2.x branch, but I'm waiting
on feedback from a tester to see if the cache fixes solve the reported
memory leak problem.
changes to bsd.lib.mk can handle building it early enough. Don't
use the same rule for ss_err.h and ss_err.c, else `make -jN' would
run the rule twice concurrently. Don't put ss_err.c out of order
in SRCS; doing so was a kludge to get ss_err.h built early enough
for plain `make'.
Don't put a non-generated file in CLEANFILES.
since there might be permanent entries still left after
calls to DeleteLink (it will be nullified by DeleteLink
if all entries are deleted, won't it ?)
2) in PacketAliasSetAddress, set the aliasing address
even when PKT_ALIAS_RESET_ON_ADDR_CHANGE is in effect.
Just don't clean up links in this case.
Submitted by: Ari Suutari <ari@suutari.iki.fi>
via: Charles Mott <cmott@srv.net>
PR: 5041
fix a slight confusion about which draft of threads we are supporting.
this allows something as big and ugly as samba to be compiled with libc_r
and still work! our user-level pthreads seems amazingly robust!
implement mkdtemp
improve man page for mk*temp
use arc4random to seed extra XXX's randomly
Optionally warn of unsafe mktemp uses
From various commits by theo de raadt and Todd Miller.
Obtained from: OpenBSD
This should go into 2.2 after a testing period.
specifically:
uthread_accept.c: Fix for inherited socket not getting correct entry in
pthread flags.
uthread_create.c: Fix to allow pthread_t pointer return to be null if
caller doesn't care about return.
uthread_fd.c: Fix for return codes to be placed into correct errno.
uthread_init.c: Changes to make gcc-2.8 thread aware for exception stack
frames (WARNING: This is #ifdef'ed out by default and is
different from the Cygnus egcs fix).
uthread_ioctl.c: Fix for blocking/non-blocking ioctl.
uthread_kern.c: Signal handling fixes (only one case left to fix,
that of an externally sent SIGSEGV and friends -
a fairly unusual case).
uthread_write.c: Fix for lock of fd - ask for write lock, not read/write.
uthread_writev.c: Fix for lock of fd - ask for write lock, not read/write.
Pthreads now works well enough to run the LDAP and ACAPD(with the gcc 2.8 fix)
sample implementations.
one group. Thanks to Dirk Froemberg for supplying a patch for this. I will
be closing out the PR and moving this to the 2.2.5 branch later: my login
sessions to freefall from Columbia are ridiculously spotty today.
PR: 5610
Submitted by: Dirk Froemberg <ibex@physik.TU-Berlin.DE>
into libc. This reduces the size of every dynamically linked
executable by 248 bytes, and it reduces the size of static executables
by a lesser amount. It also eliminates some global namespace
pollution.
With this change in place, the source for dlfcn.h should probably
be moved to "/usr/src/include". I'll save that for another day.
Compatibility note: Programs which use dlopen, if compiled on
systems with this change, will not run on systems with a libc from
prior to this change. Very few programs use dlopen, so I think
that is OK.
isn't a prerequisite, since it isn't required for the prototypes
and isn't always needed to call the functions (the address family
might be a variable).
and the pre-Lite2 vfsconf interfaces.
For getvfsent.c, just define _OLD_VFSCONF. This will give the
current default macro hacks in <sys/mount.h> when the default is
reversed. This is an intermediate step.
makefile doesn't install them, and they couldn't be used without
lots of undocumented -I's in CFLAGS. tcl.h is still installed in
/usr/include/tcl/. Note that rev.1.24 of tcl_bmake/mkMakefile.sh
broke all the section 3 tcl man pages by putting it there instead
of in /usr/include.
are in kvm_uread():
- the setting of errno before checking it in the lseek() was lost.
- EOF handling was lost. kvm_uread() retried forever on EOF. EOF is
not really an error, but report it one as in rev.1.2.
- reporting of errno after a read error was lost.
Fixed style bugs in rev.1.3 and rev.1.12.
Not fixed: errno is not reported after lseek() failures.
overwrites it. This actually showed up when running under an old
kernel when free() called the madvise() stub which set errno, causing
getcwd() to return EOPNOTSUPP instead of ERANGE.
stale obj directory and we wouldn't want to do that! I trust he knows
what he's talking about. 8-)
Also avoid building libm at all until the NetBSD asm code is imported.
I wrongly commented this out last time. Oops.
that this source is compiled against. This source is referenced by
install which is needed as a build tool and must be able to compile
against NetBSD headers and libraries if we have a hope of supporting
another architecture.
With this change, that's two working programs down and 3945 (?) to go.
The other one was make, but that didn't need any changes to work under
FreeBSD/Alpha. 8-)
to another architecture (in this case the Alpha) we can continue to use
the host csu objects (from NetBSD). This should be a non-function change
to FreeBSD/i386.
case has very little to do with the output size being larger than
INT_MAX.
2. The new #include of <limits.h> was disordered.
3. The new declaration of `on' was disordered (integer types go together).
4. Testing an unsigned value for > 0 was fishy.
Submitted by: bde
mlock, mmap, mprotect, msync, munlock, and munmap are defined by
POSIX as taking void *. The const modifier has been added to
mlock, munlock, and mprotect as the standard dictates.
minherit comes from OpenBSD and has been updated to conform with
their recent change to void *.
madvise and mincore are not defined by POSIX, but their arguments
have been modified to be consistent with the POSIX-defined functions.
mincore takes a const pointer, but madvise does not due to the
MADV_FREE case.
Discussed with: bde
at the first position on either of the last two lines of the
screen. Ie. append contents of current line to the previous
line and scroll the next line's contents up.
PR: 5392
Submitted by: Kouichi Hirabayashi <kh@mogami-wire.co.jp>
instead of Singe Unix, thanx Bruce for explaining, I am not realize
standards war was there.
But now, fix n == 0 case to not return error and fix check for too
big n.
Things left to do: check for overflow in arguments.
Final word is Bruce's quote:
C9x specifies the BSD4.4-Lite behaviour:
[#3] ... Thus, the
null-terminated output has been completely written if and
only if the returned value is less than n.
It means that if we not have any null-terminated output as for n == 0
we can't return value less than n, so we forced to return value
equal to n i.e. 0
The next good thing is glibc compatibility, of course.
2) Do check for too big n in machine-independent way.
3) Minor optimization assuming EOF is < 0
The main argument is that it is impossible to determine if %n evaluated or not
when snprintf return 0, because it can happens for both n == 0 and n == 1.
Although EOF here is good indication of the end of process, if n is
decreased in the loop...
Since it is already supposed in many places that EOF *is* negative, f.e.
from Single Unix specs for snprintf
"return ... a negative value if an output error was encountered"
this not makes situation worse.
to pass not more than buffer size to %n agrument, old variant
always assume infinite buffer.
%n is for actually transmitted characters, not for planned ones.
"return the number of bytes needed, rather the number used"
According to Single Unix specs:
Upon successful completion, these functions return the number of bytes
transmitted excluding the terminating null
1) if buffer size is smaller than arguments size, return buffer
size, not arguments size as before.
2) if buffer size is 0, return 0, not EOF as before.
(now it is compatible with Linux and Apache implementations too).
NOTE: Single Unix specs says:
If the value of n {buffer size} is zero on a call to snprintf(), an
unspecified value less than 1 is returned.
It means we can't return EOF since EOF can take *any* value in general
not especially < 1. Better variant will be return -1 (it is less then
1 and different with n == 1 case) but -1 value is already occuped by
EOF in our implementation, so we can't distinguish true IO error
in that case. So 0 here is only possible case still conforming
to Single Unix specs.
where shared libraries are in /lib and almost everything is linked
shared. First, they removed the old shared library before installing
the new one. Second, they attemped a cross-device link from /lib
to /usr/lib/compat.
a malloc. The signal handler creates a thread which requires a malloc...
For now, the only thing to do is to block signals. When we move user
pthreads to use the kernel threads, mutexes will be implemented in kernel
space and then malloc can revert.
In the man page Use ".Pp" instead of blank lines, adopt English
and stress that the Julian->Gregorian switch took place at
different dates in different countries.
Suggested by: Garrett.
to the same version numbers as 2.2.x.
The problem with the way things were was:
- if you took a 2.2.x binary, it either wouldn't run on -current or
if you had the old -current version of libtermcap.so.2.1 then it could
potentially be a security problem.
- the alternative is to start a compat22 tree dist for -current with a
uuencoded binary. This makefile hack is less cost.
libtermcap.so.3.0 is provided via /usr/lib/compat to avoid transition
problems.
a similar way to libc. Sigh. This is not pretty but seems to work.
Somthing like this was needed in preference to bogusly bumping the major
library number here.
The syscall(SYS_issetugid) idea is originally Bruce's.
functions would return -1 and set errno to indicate the specific error.
POSIX requires that the functions return the error code as the return
value of the function instead.
on systems where long doubles are just doubles. FreeBSD hasn't
been such a system since it started using gcc-2.5 many years ago.
The fix is of low quality. It loses precision.
scanf() of long doubles doesn't seem to be used much, but gdb-4.16
uses %Lg format in its expression parser if it thinks that the
system supports printf'ing of long doubles. The symptom was that
floating point literals were usually interpreted to be 0.0.
Note this ONLY affects the function version - the macro version is always
used unless for some reason you put #undef sigismember in your code before
calling it.
PR: 3615
Submitted by: Nanbor Wang <nw1@cs.wustl.edu> (slightly amended patch)
Obtained from: Whistle Communications tree
Add an option to the way UFS works dependent on the SUID bit of directories
This changes makes things a whole lot simpler on systems running as
fileservers for PCs and MACS. to enable the new code you must
1/ enable option SUIDDIR on the kernel.
2/ mount the filesystem with option suiddir.
hopefully this makes it difficult enough for people to
do this accidentally.
see the new chmod(2) man page for detailed info.
Ever since I first say the way the mount flags were used I've hated the
fact that modes, and events, internal and exported, and short-term
and long term flags are all thrown together. Finally it's annoyed me enough..
This patch to the entire FreeBSD tree adds a second mount flag word
to the mount struct. it is not exported to userspace. I have moved
some of the non exported flags over to this word. this means that we now
have 8 free bits in the mount flags. There are another two that might
well move over, but which I'm not sure about.
The only user visible change would have been in pstat -v, except
that davidg has disabled it anyhow.
I'd still like to move the state flags and the 'command' flags
apart from each other.. e.g. MNT_FORCE really doesn't have the
same semantics as MNT_RDONLY, but that's left for another day.
PR: 4555
Submitted by: Dmitrij Tejblum <tejblum@arc.hq.cti.ru>
[0x0400 - 0xffff] [bbbbbbbb.bbbbbbbb] -> 1110bbbb, 10bbbbbb, 10bbbbbb
.Ed
.Pp
If more than a single representation of a value exists (for example,
0x00; 0xC0 0x80; 0xE0 0x80 0x80) the shortest representation is always
used (but the longer ones will be correctly decoded).
.Pp
The final three encodings provided by X-Open:
.Bd -literal
[00000000.000bbbbb.bbbbbbbb.bbbbbbbb] ->
11110bbb, 10bbbbbb, 10bbbbbb, 10bbbbbb
[000000bb.bbbbbbbb.bbbbbbbb.bbbbbbbb] ->
111110bb, 10bbbbbb, 10bbbbbb, 10bbbbbb, 10bbbbbb
[0bbbbbbb.bbbbbbbb.bbbbbbbb.bbbbbbbb] ->
1111110b, 10bbbbbb, 10bbbbbb, 10bbbbbb, 10bbbbbb, 10bbbbbb
.Ed
.Pp
which provides for the entire proposed ISO-10646 31 bit standard are currently
not implemented.
.Sh "SEE ALSO"
.Xr mklocale 1 ,
.Xr setlocale 3
@
1.4
log
@Don't use hardcoded *roff font change requests. Do it
via mdoc macros instead.
@
text
@d37 1
a37 1
.Dd "June 4, 1993"
@
1.3
log
@Very minor mdoc cleanup.
@
text
@d44 2
a45 1
\fBENCODING "UTF2"\fP
@
1.2
log
@Another round of various man page cleanups.
@
text
@d65 1
a65 1
.sp
d81 1
a81 1
.sp
@
1.2.2.1
log
@YAMFC:
Commit all of the -current changes that apply to 2.2. These fall into
several categories:
- Cosmetic/mdoc changes. They don't really afect the output
at all, but having them in 2.2 will make it easier to diff the man
pages later when looking for real changes.
- Update some man pages to reflect the current 2.2 header files.
- Sort xrefs.
- A few typo fixes.
- And a few changes that actualy added text to the man page that should
be reflected in 2.2.
- Add some missing MLINKS.
Requested by: bde
@
text
@d44 1
a44 2
.Nm ENCODING
.Qq UTF2
d65 1
a65 1
.Pp
d81 1
a81 1
.Pp
@
1.2.2.2
log
@MFC: Just the locale fixes (small doc tweaks for the most part)
and the new strptime(3) call. Having added something, does this
require a version bump? Haven't we bumped once already?
There are a *LOT* of additional 3.0 changes to be merged but I'm not
entirely comfortable with some of them so I'll take the conservative
(read: cowardly :) way out and just merge this much.
@
text
@d37 1
a37 1
.Dd June 4, 1993
@
1.1
log
@Initial revision
@
text
@d41 1
a41 1
.Nm UTF2
@
1.1.1.1
log
@BSD 4.4 Lite Lib Sources
@
text
@@
1.1.1.1.6.1
log
@Phase 2 of merge - also fix things broken in phase 1.
Watch out for falling rock until phase 3 is over!
libc completely merged except for phkmalloc & rfork (don't know if David
wants that).
Some include files in sys/ had to be updated in order to bring in libc.
@
text
@d41 1
a41 1
.Nm utf2
@
1.1.1.1.6.2
log
@This 3rd mega-commit should hopefully bring us back to where we were.
I can get it to `make world' succesfully, anyway!
@
text
@d41 1
a41 1
.Nm UTF2
@
partway through its attempt to decode the result structure sent by
the server. If this happens, it can leave the result partially
populated with dynamically allocated memory. In this event, the
xdr_replymsg() failure is detected and RPC_CANTDECODERES is returned,
but the memory in the partially populated result struct is not
free()d.
The end result is that memory is leaked when an RPC_CANTDECODERES
error occurs. (This condition can occur if a CLIENT * handle is created
using clntudp_bufcreate() with a receive buffer size that is too small
to handle the result sent by the server.)
Fixed by setting reply_xdrs.x_op to XDR_FREE and calling
xdr_replymsg() again to free the memory if an RPC_CANTDECODERES error
is detected.
I suspect that the clnt_tcp.c, clnt_unix.c and clnt_raw.c modules
may ha a similar problem, but I haven't duplicated the condition with
those yet.
Found by: dbmalloc
to fail under certain circumstances.
1. In one spot, the ifr_flags member was being examined in the
wrong structure, thus it contained garbage. On a machine in which
only the loopback interface was up, this caused everything that
wanted to talk to the portmapper to fail -- a particular problem
with laptops, where the pccard ethernet interface is likely to come
up long after the attempt to start mountd, nfsd, amd, etc.
2. Compounding the above problem, get_myaddress() returned a
successful status even though it failed to find an address that it
considered good enough.
This fixes bugs in the manual handling. abs.[cS] was handled too
specially and the wrong (.c) variant for each of div.[cS], labs.[cS]
and ldiv.[cS] was added to SRCS. This caused the .c variant to be
used if `depend' was made and the .S version to be used otherwise.
The names of m-d variants are now added (manually) to MDSRCS instead
of to SRCS, and the names of all machine-independent (m-i) variants
that can reasonably be replaced by an m-d variant are now added
(manually) to MISRCS instead of to SRCS, so that a simple substitution
can be used to discard the unused m-i variants. MISRCS is potentially
all m-i sources, but the substitution is too simple to be fast, so
MISRCS should be kept reasonably small.
libc/Makefile.inc:
Do the substitution.
libc/i386/string/Makefile.inc:
Add to MDSRCS instead of to SRCS. Add the names of all sources in this
directory, but no others.
libc/string/Makefile.inc
Add to MISRCS instead of to SRCS. Add the names of all sources in this
directory. Don't use (broken) explicit rules for special cases.
