Commit Graph

1378 Commits

Author SHA1 Message Date
John Baldwin
0d484d249f Allow device hints to wire the unit numbers of devices.
- An "at" hint now reserves a device name.
- A new BUS_HINT_DEVICE_UNIT method is added to the bus interface.  When
  determining the unit number of a device, this method is invoked to
  let the bus driver specify the unit of a device given a specific
  devclass.  This is the only way a device can be given a name reserved
  via an "at" hint.
- Implement BUS_HINT_DEVICE_UNIT() for the acpi(4) and isa(4) bus drivers.
  Both of these busses implement this by comparing the resources for a
  given hint device with the resources enumerated by ACPI/PnPBIOS and
  wire a unit if the hint resources are a subset of the "real" resources.
- Use bus_hinted_children() for adding hinted devices on isa(4) busses
  now instead of doing it by hand.
- Remove the unit kludging from sio(4) as it is no longer necessary.

Prodding from:	peter, imp
OK'd by:	marcel
MFC after:	1 month
2008-11-18 21:01:54 +00:00
Warner Losh
132580b5af MFp4:
Make the ISA bus keep track of more PNP details.  Plus a minor style
fix while I'm here.  More could be done here, but except for some SBCs
that don't have ACPI, there's limited value to anybody in doing so.
2008-11-02 18:48:54 +00:00
Warner Losh
5b4ae40039 MFp4 (my newcard tree):
ISACFGATTR_MULTI is unused.  Retire it, and a function that has no
side effects used to compute it.
2008-08-24 07:40:14 +00:00
Poul-Henning Kamp
7e82012aff atrtc.c is a repocopy of the RTC device driver from i386/isa/clock.c
In addition to the device driver functionality, it exposes a number of
functions which various other bits of code use to fondle the RTC chip.
2008-04-14 07:57:15 +00:00
Poul-Henning Kamp
2946435299 Move i386 to generic RTC handling code.
Make clock_if.m and subr_rtc.c standard on i386

Add hints for "atrtc" driver, for non-PnP, non-ACPI systems.
NB: Make sure to install GENERIC.hints into /boot/device.hints in these!

Nuke MD inittodr(), resettodr() functions.

Don't attach to PHP0B00 in the "attimer" dummy driver any more, and remove
comments that no longer apply for that reason.

Add new "atrtc" device driver, which handles IBM PC AT Real Time
Clock compatible devices using subr_rtc and clock_if.

This driver is not entirely clean: other code still fondles the
hardware to get a statclock interrupt on non-ACPI timer systems.

Wrap some overly long lines.

After it has settled in -current, this will be ported to amd64.

Technically this is MFC'able, but I fail to see a good reason.
2008-04-12 20:46:06 +00:00
Poul-Henning Kamp
dad3b6c6fd Back in the good old days, PC's had random pieces of rock for
frequency generation and what frequency the generated was anyones
guess.

In general the 32.768kHz RTC clock x-tal was the best, because that
was a regular wrist-watch Xtal, whereas the X-tal generating the
ISA bus frequency was much lower quality, often costing as much as
several cents a piece, so it made good sense to check the ISA bus
frequency against the RTC clock.

The other relevant property of those machines, is that they
typically had no more than 16MB RAM.

These days, CPU chips croak if their clocks are not tightly within
specs and all necessary frequencies are derived from the master
crystal by means if PLL's.

Considering that it takes on average 1.5 second to calibrate the
frequency of the i8254 counter, that more likely than not, we will
not actually use the result of the calibration, and as the final
clincher, we seldom use the i8254 for anything besides BEL in
syscons anyway, it has become time to drop the calibration code.

If you need to tell the system what frequency your i8254 runs,
you can do so from the loader using hw.i8254.freq or using the
sysctl kern.timecounter.tc.i8254.frequency.
2008-03-26 22:12:00 +00:00
Poul-Henning Kamp
1d73a9dc74 Further cleanup of sound generation in syscons:
The timer_spkr_*() functions take care of the enabling/disabling
of the speaker.

Test on the existence of timer_spkr_*() functions, rather than
architectures.
2008-03-26 22:02:51 +00:00
Poul-Henning Kamp
e465985885 The "free-lance" timer in the i8254 is only used for the speaker
these days, so de-generalize the acquire_timer/release_timer api
to just deal with speakers.

The new (optional) MD functions are:
	timer_spkr_acquire()
	timer_spkr_release()
and
	timer_spkr_setfreq()

the last of which configures the timer to generate a tone of a given
frequency, in Hz instead of 1/1193182th of seconds.

Drop entirely timer2 on pc98, it is not used anywhere at all.

Move sysbeep() to kern/tty_cons.c and use the timer_spkr*() if
they exist, and do nothing otherwise.

Remove prototypes and empty acquire-/release-timer() and sysbeep()
functions from the non-beeping archs.

This eliminate the need for the speaker driver to know about
i8254frequency at all.  In theory this makes the speaker driver MI,
contingent on the timer_spkr_*() functions existing but the driver
does not know this yet and still attaches to the ISA bus.

Syscons is more tricky, in one function, sc_tone(), it knows the hz
and things are just fine.

In the other function, sc_bell() it seems to get the period from
the KDMKTONE ioctl in terms if 1/1193182th second, so we hardcode
the 1193182 and leave it at that.  It's probably not important.

Change a few other sysbeep() uses which obviously knew that the
argument was in terms of i8254 frequency, and leave alone those
that look like people thought sysbeep() took frequency in hertz.

This eliminates the knowledge of i8254_freq from all but the actual
clock.c code and the prof_machdep.c on amd64 and i386, where I think
it would be smart to ask for help from the timecounters anyway [TBD].
2008-03-26 20:09:21 +00:00
Poul-Henning Kamp
ebfbcd612a Rename timer0_max_count to i8254_max_count.
Rename timer0_real_max_count to i8254_real_max_count and make it static.
Rename timer_freq to i8254_freq and make it a loader tunable.
2008-03-26 15:03:24 +00:00
Poul-Henning Kamp
f168bfa529 The RTC related pscnt and psdiv variables have no business being public. 2008-03-26 13:25:27 +00:00
John Baldwin
c05655bfda Use cpu_spinwait() (i.e., "pause") when spinning on rdtsc during DELAY().
MFC after:	1 week
2008-01-17 18:59:38 +00:00
Wojciech A. Koszek
9336e0699b Replace explicit calls to video methods with their respective variants
implemented with macros. This patch improves code readability. Reasoning
behind vidd_* is a sort of "video discipline".

List of macros is supposed to be complete--all methods of video_switch
ought to have their respective macros from now on.

Functionally, this code should be no-op. My intention is to leave current
behaviour of touched code as is.

No objections:	rwatson
Silence on:	freebsd-current@
Approved by:	cognet
2007-12-29 23:26:59 +00:00
Peter Wemm
d556638404 Split /dev/nvram driver out of isa/clock.c for i386 and amd64. I have not
refactored it to be a generic device.
Instead of being part of the standard kernel, there is now a 'nvram' device
for i386/amd64.  It is in DEFAULTS like io and mem, and can be turned off
with 'nodevice nvram'.  This matches the previous behavior when it was
first committed.
2007-10-26 03:23:54 +00:00
David Malone
9be70a793e It seems that some i386 mothermoards either do not implement the
day of week field correctly, or they remember bad values that are
written into the day of week field. For this reason, ignore the day
of week field when reading the clock on i386 rather than bailing if
it is set incorrectly.

Problems were seen on a number of platforms, including VMWare, qemu,
EPIA ME6000, Epox-3PTA and ABIT-SL30T.

This is a slightly different fix to that proposed by Ted in his PR,
but the same basic idea.

PR:		111117
Submitted by:	Ted Faber <faber@lunabase.org>
Approved by:	re (rwatson)
MFC after:	3 weeks
2007-07-27 09:34:42 +00:00
David Malone
6d8617d42a If clock_ct_to_ts fails to convert time time from the real time clock,
print a one line error message. Add some comments on not being able to
trust the day of week field (I'll act on these comments in a follow up
commit).

Approved by:	re
MFC after:	3 weeks
2007-07-23 09:42:32 +00:00
Peter Wemm
5915fb72fb Prototype (but functional) Linux-ish /dev/nvram interface to the extra
114 bytes of cmos ram in the PC clock chip.  The big difference between
this and the Linux version is that we do not recalculate the checksums
for bytes 16..31.

We use this at work when cloning identical machines - we can copy the
bios settings as well.  Reading /dev/nvram gives 114 bytes of data but
you can seek/read/write whichever bytes you like.

Yes, this is a "foot, gun, fire!" type of device.
2007-06-15 22:58:14 +00:00
David Malone
041b706b2f Despite several examples in the kernel, the third argument of
sysctl_handle_int is not sizeof the int type you want to export.
The type must always be an int or an unsigned int.

Remove the instances where a sizeof(variable) is passed to stop
people accidently cut and pasting these examples.

In a few places this was sysctl_handle_int was being used on 64 bit
types, which would truncate the value to be exported.  In these
cases use sysctl_handle_quad to export them and change the format
to Q so that sysctl(1) can still print them.
2007-06-04 18:25:08 +00:00
John Baldwin
90dea4f9a7 When trying to allocate a PnP BIOS memory resource, the code loops trying
to move up the start address until the allocation succeeds.  If the
alignment of the resource was 0, then the code would keep trying the same
request in an infinite loop and hang.  Force the request to always move
start up by at least 1 byte each time through the loop.
2007-04-17 15:14:23 +00:00
Bruce Evans
d78180f8f5 Partial fix for a bug in rev.1.231. If suspend/resume clobbers the
RTC state, then it may clobber the RTC index register, so the index
register must be restored before using it to restore control registers
in rtc_restore().

The following problems remain:
- rtc_restore() is only called if pmtimer is configured.  Buggy
  suspend/resumes are more likely to clobber the index register than
  a control register, so pmtimer is more needed than it used to be.
- pmtimer doesn't exist for amd64.
- Restoring of the RTC state may race with rtcintr().  If an RTC
  interrupt is handled before the state is restored, then rtcin(RTC_INTR)
  in rtcintr() may read from the wrong register, so rtcintr() may spin
  forever.  This may be mitigated by the most common state clobbering
  being to turn off RTC interrupts.
2007-03-05 09:10:17 +00:00
Yoshihiro Takahashi
de038d5ffc style(9). 2007-03-04 04:55:19 +00:00
John Baldwin
84d37a463a Use pause() rather than tsleep() on explicit global dummy variables. 2007-02-27 17:22:30 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Bruce Evans
71799af2d5 Cleaned up declaration and initialization of clock_lock. It is only
used by clock code, so don't export it to the world for machdep.c to
initialize.  There is a minor problem initializing it before it is
used, since although clock initialization is split up so that parts
of it can be done early, the first part was never done early enough
to actually work.  Split it up a bit more and do the first part as
late as possible to document the necessary order.  The functions that
implement the split are still bogusly exported.

Cleaned up initialization of the i8254 clock hardware using the new
split.  Actually initialize it early enough, and don't work around it
not being initialized in DELAY() when DELAY() is called early for
initialization of some console drivers.

This unfortunately moves a little more code before the early debugger
breakpoint so that it is harder to debug.  The ordering of console and
related initialization is delicate because we want to do as little as
possible before the breakpoint, but must initialize a console.
2007-01-23 08:01:20 +00:00
Ceri Davies
18929073b9 Be consistent with the spelling of "dependent" in user-visible places.
PR:		kern/27429
Submitted by:	T. William Wells
2006-12-30 11:55:47 +00:00
Bruce Evans
b73057227b Optimized RTC accesses by avoiding null writes to the index register
and by only delaying when an RTC register is written to.  The delay
after writing to the data register is now not just a workaround.

This reduces the number of ISA accesses in the usual case from 4 to
1.  The usual case is 2 rtcin()'s for each RTC interrupt.  The index
register is almost always RTC_INTR for this.  The 3 extra ISA accesses
were 1 for writing the index and 2 for delays.  Some delays are needed
in theory, but in practice they now just slow down slow accesses some
more since almost eveyone including us does them wrong so modern systems
enforce sufficient delays in hardware.  I used to have the delays ifdefed
out, but with the index register optimization the delays are rarely
executed so the old magic ones can be kept or even implemented non-
magically without significant cost.

Optimizing RTC interrupt handling is more interesting than it used to
be because RTC interrupts are currently needed to fix the more efficient
apic timer interrupts on some systems.  apic_timer_hz is normally 2000
so the RTC interrupt rate needs to be 2048 to keep the apic timer
firing on such systems.  Without these changes, each RTC interrupt
normally took 10 ISA accesses (2 PIC accesses and 2 sets of 4 RTC
accesses).  Each ISA access takes 1-1.5uS so 10 of then at 2048 Hz
takes 2-3% of a CPU.  Now 4 of them take 0.8-1.2% of a CPU.
2006-12-03 03:49:28 +00:00
Poul-Henning Kamp
e4c9547050 Use calendaric calculation support from subr_clock.c instead of home-rolled.
Eventually, this RTC should probably use subr_rtc.c as well
2006-10-02 16:18:40 +00:00
Poul-Henning Kamp
b69f71eb29 Second part of a little cleanup in the calendar/timezone/RTC handling.
Split subr_clock.c in two parts (by repo-copy):
   subr_clock.c contains generic RTC and calendaric stuff. etc.
   subr_rtc.c contains the newbus'ified RTC interface.

Centralize the machdep.{adjkerntz,disable_rtc_set,wall_cmos_clock}
sysctls and associated variables into subr_clock.c.  They are
not machine dependent and we have generic code that relies on being
present so they are not even optional.
2006-10-02 15:42:02 +00:00
Poul-Henning Kamp
f645b0b51c First part of a little cleanup in the calendar/timezone/RTC handling.
Move relevant variables to <sys/clock.h> and fix #includes as necessary.

Use libkern's much more time- & spamce-efficient BCD routines.
2006-10-02 12:59:59 +00:00
Warner Losh
ddebcb409b Eliminate one set of XBOX #ifdefs. The Xbox code just needs to set a
different TIMER_FREQ value than default.  Accomplish this via the
config file rather than via an #ifdef.
2006-08-09 23:47:38 +00:00
Warner Losh
360de69338 (apply '(lambda (reformat-region 'style-9-parens)) (read-file isahint.c))
remove redundant parens, per style(9) to reduce that limp, lispy feeling.
2006-07-08 16:50:10 +00:00
Warner Losh
3c7c9eb558 Remove old GENERIC kludge. We no longer need to skip devices named
atkbd.  Version 1.162 of GENERIC fixed this problem in April of 1999.
Subsequent to that, the hints data was removed from GENERIC and move
to hints files.  All the hints file ever created have atkbd at the
right location.  This should have been removed just after RELENG_4 was
branched (and likely around 4.5 in RELENG_4).

MFC After: 3 days
2006-07-08 15:51:55 +00:00
Marius Strobl
acb8c14985 Make the ISAPNP code optional and only enable it on i386 and pc98 (used
for CBUS-PNP cards there) by default, as there are no amd64 and sparc64
machines with ISA slots and which therefore could make use of this code
known to exist. For sparc64 this additionally allows to get rid of the
compat shims for in{b,w,l}()/out{b,w,l}() etc and the associated hacks.

OK'ed by:	imp, peter
2006-06-12 21:07:13 +00:00
John Baldwin
73dbd3da73 Remove various bits of conditional Alpha code and fixup a few comments. 2006-05-12 05:04:46 +00:00
Rink Springer
5fa7c51ff6 Committed the xbox syscons(8)-able console driver.
Reviewed by:    arch@ (no comments)
Approved by:    imp (mentor)
2006-03-03 14:52:57 +00:00
John Baldwin
b439e431bf Tweak how the MD code calls the fooclock() methods some. Instead of
passing a pointer to an opaque clockframe structure and requiring the
MD code to supply CLKF_FOO() macros to extract needed values out of the
opaque structure, just pass the needed values directly.  In practice this
means passing the pair (usermode, pc) to hardclock() and profclock() and
passing the boolean (usermode) to hardclock_cpu() and hardclock_process().
Other details:
- Axe clockframe and CLKF_FOO() macros on all architectures.  Basically,
  all the archs were taking a trapframe and converting it into a clockframe
  one way or another.  Now they can just extract the PC and usermode values
  directly out of the trapframe and pass it to fooclock().
- Renamed hardclock_process() to hardclock_cpu() as the latter is more
  accurate.
- On Alpha, we now run profclock() at hz (profhz == hz) rather than at
  the slower stathz.
- On Alpha, for the TurboLaser machines that don't have an 8254
  timecounter, call hardclock() directly.  This removes an extra
  conditional check from every clock interrupt on Alpha on the BSP.
  There is probably room for even further pruning here by changing Alpha
  to use the simplified timecounter we use on x86 with the lapic timer
  since we don't get interrupts from the 8254 on Alpha anyway.
- On x86, clkintr() shouldn't ever be called now unless using_lapic_timer
  is false, so add a KASSERT() to that affect and remove a condition
  to slightly optimize the non-lapic case.
- Change prototypeof  arm_handler_execute() so that it's first arg is a
  trapframe pointer rather than a void pointer for clarity.
- Use KCOUNT macro in profclock() to lookup the kernel profiling bucket.

Tested on:	alpha, amd64, arm, i386, ia64, sparc64
Reviewed by:	bde (mostly)
2005-12-22 22:16:09 +00:00
Peter Wemm
737429bc96 MFamd64 rev 1.223: Use the TSC to implement DELAY() if not marked broken
and it has been calibrated.
2005-12-13 19:08:55 +00:00
Ruslan Ermilov
f4e9888107 Fix -Wundef. 2005-12-04 02:12:43 +00:00
Warner Losh
51ef421d92 Add support for XBOX to the FreeBSD port. The xbox architecture is
nearly identical to wintel/ia32, with a couple of tweaks.  Since it is
so similar to ia32, it is optionally added to a i386 kernel.  This
port is preliminary, but seems to work well.  Further improvements
will improve the interaction with syscons(4), port Linux nforce driver
and future versions of the xbox.

This supports the 64MB and 128MB boxes.  You'll need the most recent
CVS version of Cromwell (the Linux BIOS for the XBOX) to boot.

Rink will be maintaining this port, and is interested in feedback.
He's setup a website http://xbox-bsd.nl to report the latest
developments.

Any silly mistakes are my fault.

Submitted by: Rink P.W. Springer rink at stack dot nl and
	Ed Schouten ed at fxq dot nl
2005-11-09 03:55:40 +00:00
Marius Strobl
c7974ff135 Fix an endianness issue in pnp_eisaformat(). This corrects printing PnP IDs
on big-endian archs like sparc64, e.g.:
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 43 pnpid @HEd041 on isa0
is now correctly printed as:
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 43 pnpid PNP0501 on isa0

There are probably other endianness issues lurking in the PnP code which
however aren't exhibited on sparc64 as the PnP devices there are sort of
PnP BIOS devices rather than ISA PnP devices.

Tested on:	i386, sparc64
MFC after:	1 week
2005-09-28 15:01:58 +00:00
Warner Losh
a81804d94f Add pnp and location info for the ISA bus. The pnp info is the
primary vendor id for this device.  The location is empty because ISA
doesn't give one a way to generally locate a card.  PNP BIOS entries
do provide a way to locate cards, as do isa pnp cards.  These
locations will be added as soon as the code to remember them is
written.
2005-08-01 07:03:10 +00:00
John Baldwin
db015a9153 Fixup some more fallout from the lapic/i8254 changes:
- Make sure timer0_max_count is set to a correct value in the lapic case.
- Revert i8254_restore() to explicitly reprogram timer 0 rather than
  calling set_timer_freq() to do it.  set_timer_freq() only reprograms
  the counter if the max count changes which it never does on resume.  This
  unbreaks suspend/resume for several people.

Tested by:	marks, others
Reviewed by:	bde
MFC after:	3 days
2005-07-13 15:43:21 +00:00
John Baldwin
623b1a868e Remove a || 1 that crept into the i8254 commit and was subsequently
copied and pasted.  I had actually tested without this change in my
trees as had the other testers.

Reported by:	bde, Rostislav Krasny rosti dot bsd at gmail dot com
Approved by:	re (scottl)
Pointy hat to:	jhb
2005-07-05 20:13:12 +00:00
John Baldwin
7df0015945 Use a simpler implementation for the i8254 timecounter when using the lapic
timer since irq0 isn't being driven at hz in that case and we don't need to
try to handle edge cases with rollover, etc. that require irq0 to be firing
for the timecounter to actually work.

Submitted by:	phk
Tested by:	schweikh
Approved by:	re (scottl)
2005-07-01 15:47:27 +00:00
Marius Strobl
520b635320 - Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source
files after they were repo-copied to sys/dev/atkbdc. The sources of
  atkbdc(4) and its children were moved to the new location in preparation
  for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in
  order to not further scatter them over the whole tree which would have
  been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another
  reason for the repo-copies was that some of the sources were misfiled,
  e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging
  atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly.
  Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't
  ISA-specific.
- Separate the parts of atkbdc_isa.c which aren't actually ISA-specific
  but are shareable between different atkbdc(4) bus front-ends into
  atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use
  bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource()
  respectively in atkbdc_isa.c instead of rolling own versions.
- Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for
  atkbdc(4). PS/2 controllers and input devices are used on a couple of
  Sun OEM boards and occur on either the EBus or the ISA bus. Depending on
  the board it's either the only on-board mean to connect a keyboard and
  mouse or an alternative to either RS232 or USB devices.
- Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled
  without isa(4) (e.g. for EBus-only machines). This ISA-specific part
  isn't separated into its own source file, yet, as it requires more work
  than was feasible for 6.0 in order to do it in a clean way. Actually
  philip@ is working on a rewrite of psm(4) so a more comprehensive
  clean-up and separation of hardware dependent and independent parts is
  expected to happen after 6.0.

Tested on:	i386, sparc64 (AX1105, AXe and AXi boards)
Reviewed by:	philip
2005-06-10 20:56:38 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Yoshihiro Takahashi
b22bf66063 - Move bus dependent defines to {isa,cbus}_dmareg.h.
- Use isa/isareg.h rather than <arch>/isa/isa.h.

Tested on: i386, pc98
2005-05-14 10:14:56 +00:00
Yoshihiro Takahashi
24072ca35b - Move timerreg.h to <arch>/include and split i8253 specific defines into
i8253reg.h, and add some defines to control a speaker.
- Move PPI related defines from i386/isa/spkr.c into ppireg.h and use them.
- Move IO_{PPI,TIMER} defines into ppireg.h and timerreg.h respectively.
- Use isa/isareg.h rather than <arch>/isa/isa.h.

Tested on: i386, pc98
2005-05-14 09:10:02 +00:00
Yoshihiro Takahashi
d6c331a30d Remove unused IO_NPX* defines. 2005-05-12 12:36:31 +00:00
Matthew N. Dodd
2ca94fca7e Add ISACFGATTR_HINTS flag to allow detection of a device that was created
as a result of the hints mechanism.
2005-04-13 03:26:24 +00:00
Matthew N. Dodd
93fa9a8d72 Replace spl protection in rtcin() and writertc() with spinlocks
using the existing clock_lock mutex.
2005-04-12 20:49:31 +00:00