Pyun YongHyeon ed072c9d1a Add Realtek RTL8201E 10/100 PHY found in RTL8105E controller. The ... exact model name is not clear yet. All previous RTL8201 10/100 PHYs used 0x8201 in MII_PHYIDR2 which in turn makes model number 0x20 but this PHY used new model number 0x08.		2011-01-26 21:07:44 +00:00
..
acphy.c
acphyreg.h
amphy.c
amphyreg.h
atphy.c	- Masking IFM_GMASK when also masking IFM_FDX is redundant and just	2011-01-14 19:16:59 +00:00
atphyreg.h
axphy.c
bmtphy.c	- Also probe BCM5214 and BCM5222.	2010-11-22 22:03:11 +00:00
bmtphyreg.h
brgphy.c	- Even after masking the media with IFM_GMASK the result may have bits	2011-01-14 19:29:53 +00:00
brgphyreg.h
ciphy.c	- Even after masking the media with IFM_GMASK the result may have bits	2011-01-14 19:29:53 +00:00
ciphyreg.h
e1000phy.c	- Masking IFM_GMASK when also masking IFM_FDX is redundant and just	2011-01-14 19:16:59 +00:00
e1000phyreg.h
exphy.c
gentbi.c	Given that unlike f.e. rgephy(4) these drivers doen't explicitly start an	2010-11-22 21:20:11 +00:00
icsphy.c
icsphyreg.h
inphy.c	Ensure Bay flow control is disabled as we're going to use IEEE 802.3 annex	2010-11-26 21:41:42 +00:00
inphyreg.h
ip1000phy.c	- Masking IFM_GMASK when also masking IFM_FDX is redundant and just	2011-01-14 19:16:59 +00:00
ip1000phyreg.h
jmphy.c	- Don't announce PAUSE support for half-duplex when MIIF_FORCEPAUSE is	2011-01-14 19:33:58 +00:00
jmphyreg.h	Add support for JMicron JMC251/JMC261 Gigabit/Fast ethernet	2010-12-18 23:52:50 +00:00
lxtphy.c
lxtphyreg.h
mii_physubr.c	- Don't announce PAUSE support for half-duplex when MIIF_FORCEPAUSE is	2011-01-14 19:33:58 +00:00
mii.c	Add missing newlines.	2010-11-22 20:57:44 +00:00
mii.h	o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control	2010-11-14 13:26:10 +00:00
miibus_if.m
miidevs	Add Realtek RTL8201E 10/100 PHY found in RTL8105E controller. The	2011-01-26 21:07:44 +00:00
miivar.h	o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control	2010-11-14 13:26:10 +00:00
mlphy.c
nsgphy.c	- Add a comment regarding the fact that as documented in the datasheet	2010-12-21 21:12:18 +00:00
nsgphyreg.h
nsphy.c
nsphyreg.h
nsphyter.c	Add support for flow control.	2010-11-22 21:24:29 +00:00
nsphyterreg.h
pnaphy.c
qsphy.c
qsphyreg.h
rdcphy.c	Add RDC Semiconductor R6040 10/100 PHY driver.	2010-12-30 23:50:25 +00:00
rdcphyreg.h	Add RDC Semiconductor R6040 10/100 PHY driver.	2010-12-30 23:50:25 +00:00
rgephy.c	- Allow IFM_FLAG0 to be set indicating that auto-negotiation with manual	2011-01-14 19:39:12 +00:00
rgephyreg.h
rlphy.c	Add Realtek RTL8201E 10/100 PHY found in RTL8105E controller. The	2011-01-26 21:07:44 +00:00
rlswitch.c
ruephy.c
ruephyreg.h
smcphy.c	o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control	2010-11-14 13:26:10 +00:00
tdkphy.c
tdkphyreg.h
tlphy.c
tlphyreg.h
truephy.c
truephyreg.h
ukphy_subr.c	o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control	2010-11-14 13:26:10 +00:00
ukphy.c	Given that unlike f.e. rgephy(4) this driver doesn't explicitly start an	2010-11-22 21:13:42 +00:00
xmphy.c	- Even after masking the media with IFM_GMASK the result may have bits	2011-01-14 19:29:53 +00:00
xmphyreg.h