..
aac
Remove duplicate 2610SA entry.
2008-11-27 20:26:02 +00:00
acpi_support
- Fix incorrect array declaration that was causing the stack overflow
2008-12-27 20:48:11 +00:00
acpica
Quick change to r186026. One of the conditionals was:
2008-12-13 07:45:48 +00:00
adb
Improve the AT keyboard emulation of the ADB keyboard driver, by supporting
2009-01-08 17:47:45 +00:00
adlink
Set D_NEEDGIANT.
2007-08-04 17:43:11 +00:00
advansys
Prepare for future integration between CAM and newbus. xpt_bus_register
2007-06-17 05:55:54 +00:00
ae
- Eliminate unused variable. [1]
2008-12-06 14:23:45 +00:00
age
Remove informational messages left. These messages were intended to
2008-11-07 07:02:28 +00:00
agp
Add support for AMD64 Family 10h processors.
2009-01-12 16:07:03 +00:00
aha
Pass bus_get_dma_tag() into the first argument of bus_dma_create_tag()
2008-10-07 23:55:32 +00:00
ahb
Fix a compile error from the last change.
2007-06-17 15:21:09 +00:00
aic
Prepare for future integration between CAM and newbus. xpt_bus_register
2007-06-17 05:55:54 +00:00
aic7xxx
Make ddb command registration dynamic so modules can extend
2008-09-15 22:45:14 +00:00
ale
AR8113 also need to set DMA read burst value. This should fix
2008-12-03 09:01:12 +00:00
amd
Prepare for future integration between CAM and newbus. xpt_bus_register
2007-06-17 05:55:54 +00:00
amr
Move the CAM passthrough code into a true module so that it doesn't have to be
2008-11-03 00:53:54 +00:00
an
In case INET is not defined, then ANCACHE is not defined and
2008-11-06 08:55:46 +00:00
ar
Retire the MALLOC and FREE macros. They are an abomination unto style(9).
2008-10-23 15:53:51 +00:00
arcmsr
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
asmc
Check for non-existing model DMI string.
2008-11-29 14:20:36 +00:00
asr
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
ata
Fix issue where ata_atapicmd() can never really return EBUSY which is
2009-01-12 17:18:58 +00:00
ath
On some platforms touching the bb registers when the phy is powered
2009-01-13 05:50:22 +00:00
atkbdc
Synaptics touchpads must be reinitialized after suspend/resume.
2008-12-17 10:42:53 +00:00
auxio
bce
Don't count InFramesL2FilterDiscards into Ierr. This value does not represent
2008-12-16 05:03:22 +00:00
bfe
Add a new sysctl node 'dev.bfe.N.stats' that shows various MAC
2008-08-22 06:46:55 +00:00
bge
- Limit BCM5701 B5 to 32-bit mode as a workaround for a bug which
2008-12-09 21:34:22 +00:00
bktr
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
bm
Change the way we enable the BMAC cell in macio. Instead of calling the
2008-10-13 17:33:55 +00:00
buslogic
Prepare for future integration between CAM and newbus. xpt_bus_register
2007-06-17 05:55:54 +00:00
cardbus
When no driver attaches to a card, don't power down the card. We can
2008-12-31 07:41:42 +00:00
ce
Retire the MALLOC and FREE macros. They are an abomination unto style(9).
2008-10-23 15:53:51 +00:00
cfe
Remove an unused variable to make the SENTRY5 mips kernel compile
2008-12-27 11:38:41 +00:00
cfi
Add a driver for flash memory that implements to the Common Flash
2008-10-25 06:18:12 +00:00
ciss
Work again to fix the interrupt masking problems. We now recognize
2008-08-29 01:23:16 +00:00
cm
Spelling fix for interupt -> interrupt
2007-10-12 06:03:46 +00:00
cmx
Commit cmx(4), a driver for Omnikey CardMan 4040 PCMCIA smartcard readers.
2008-03-06 08:09:45 +00:00
coretemp
Introduce cpu_vendor_id and replace a lot of strcmp(cpu_vendor, "...").
2008-11-26 19:25:13 +00:00
cp
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
cpuctl
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
cpufreq
Attach the cpufreq child devices with specific orders to enforce relative
2008-08-13 16:09:40 +00:00
cs
Improve the EEPROM parsing, based on finding a datasheet that describes
2008-07-09 16:47:55 +00:00
ct
ctau
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
cx
Do not set IFF_DEBUG directly from the driver.
2008-06-30 21:18:27 +00:00
cxgb
Check in the actual module recognition code for the Chelsio
2008-12-18 14:21:35 +00:00
cy
dc
- According to the corresponding Linux, NetBSD and OpenSolaris
2008-12-07 23:02:37 +00:00
dcons
Check the return values of contigmalloc(9) as well as bus_dma(9)
2009-01-07 21:25:44 +00:00
de
During attach on some de(4) adapters the driver sends out a test packet as
2008-04-05 17:24:44 +00:00
digi
dpt
Prepare for future integration between CAM and newbus. xpt_bus_register
2007-06-17 05:55:54 +00:00
drm
Only set registers if irqs are enabled
2008-12-23 22:53:57 +00:00
e1000
Fix a cut/paste bug which prevents us from setting the average
2009-01-13 00:10:50 +00:00
ed
When the miibus for the AX88x90 or TC5299J cards fails to attach, we
2008-08-06 22:22:27 +00:00
eisa
en
Hide an unused variable in case we compile with neither INET nor INET6.
2008-11-06 09:41:31 +00:00
ep
esp
o Move the MODULE_DEPEND() for cam(4) from the esp_sbus.c front-end to
2008-09-08 20:20:44 +00:00
et
Don't leak DMA map if not freed.
2008-07-11 18:26:12 +00:00
ex
Add preliminary support for the OLICOM OC2231 and OC2232. This is the
2008-08-27 04:11:03 +00:00
exca
First cut at fixing memory mapping botch. Nobody must use the ray(4)
2009-01-05 21:00:22 +00:00
fatm
Use bus_get_dma_tag() so fatm(4) works on platforms requiring it.
2008-09-30 18:52:43 +00:00
fb
Third argument to the vi_mmap_t function is vm_paddr_t *.
2008-11-29 20:16:53 +00:00
fdc
Eliminate an unused variable reported by coverity
2008-11-23 23:04:28 +00:00
fe
- Use bus_foo() rather than bus_space_foo() and retire the bus tag and handle
2008-06-23 18:16:25 +00:00
firewire
Step 1.5 of importing the network stack virtualization infrastructure
2008-10-02 15:37:58 +00:00
flash
Rename the kthread_xxx (e.g. kthread_create()) calls
2007-10-20 23:23:23 +00:00
fxp
Always check whether dma map is valid before unloading the map.
2009-01-08 04:26:44 +00:00
gem
- Restore the behavior of enabling the MII buffer for an internal
2008-08-23 15:03:26 +00:00
glxsb
Fix two possible (but unlikely) NULL-pointer dereferences in glxsb(4).
2008-11-17 07:09:40 +00:00
hatm
Give MEXTADD() another argument to make both void pointers to the
2008-02-01 19:36:27 +00:00
hifn
hme
- Use the revamped code from the gem(4) PCI front-end, which
2008-04-26 14:17:21 +00:00
hptiop
- Spell cam correctly (scbus), this makes it possible to compile hptiop
2008-10-04 10:39:31 +00:00
hptmv
Rename the kthread_xxx (e.g. kthread_create()) calls
2007-10-20 23:23:23 +00:00
hptrr
Fix a mistake made during the import of the driver. Previous versions of
2008-03-08 18:06:48 +00:00
hwpmc
Bug fixes:
2008-12-16 11:04:02 +00:00
ic
- Cleanup i8251 related defines.
2008-09-07 04:35:04 +00:00
ichsmb
- Use bus_foo() rather than bus_space_foo() and remove bus space tag/handle
2008-06-06 18:29:56 +00:00
ichwd
Add more PCI IDs including those for ICH10.
2008-08-25 15:23:54 +00:00
ida
ie
Use the new bus device_shutdown hook for performing the shutdown action
2008-08-01 21:33:07 +00:00
ieee488
Remove the distinction between device minor and unit numbers.
2008-05-29 12:50:46 +00:00
if_ndis
Provide a NDIS tx power level converstion to/from net80211, this uses a loookup
2009-01-12 17:15:09 +00:00
iicbus
Change the way I2C bus attachment works to allow firmware-assisted bus
2009-01-06 17:23:37 +00:00
iir
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
io
Remove D_NEEDGIANT from io(4).
2008-08-08 13:43:56 +00:00
ipmi
Fix typo where the code was missing the "IPMICTL_RECEIVE_MSG_32" condition
2008-11-14 01:53:10 +00:00
ips
ipw
Minor cleanup of vap create work:
2008-05-12 00:15:30 +00:00
iscsi /initiator
Big update to the iSCSI initiator code. Highlights include IPv6 support,
2008-11-25 07:17:11 +00:00
isp
Don't try reading the SXP_PINS_DIFF on the 10160 and 12160 SCSI
2008-12-15 21:42:38 +00:00
ispfw
Make ispfw(4) play nice with individual firmware modules.
2008-11-11 00:14:10 +00:00
iwi
Change the calling convention for ic_node_alloc to deal with
2008-06-07 18:38:02 +00:00
iwn
o use the new association callback to notify the driver when joining a bss
2008-10-27 16:46:50 +00:00
ixgb
ixgbe
Small nit I just noticed, a pre-decrement should be post.
2008-11-27 02:19:44 +00:00
jme
Add HW MAC counter support for newer JMC250/JMC260 revisions.
2008-12-04 02:16:53 +00:00
joy
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
k8temp
Check the return value of config_intrhook_establish().
2008-11-29 14:26:22 +00:00
kbd
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
kbdmux
Use Giant for kbdmux(4) locking. This is to workaround the problem
2008-09-22 22:08:43 +00:00
le
- Use bus_{read,write}_*(9) instead of bus_space_{read,write}_*(9) etc
2008-09-24 21:26:46 +00:00
led
Remove unit2minor() use from kernel code.
2008-09-26 14:19:52 +00:00
lge
Plug memory leak in jumbo buffer allocation failure path.
2008-03-05 05:36:09 +00:00
lmc
Retire the MALLOC and FREE macros. They are an abomination unto style(9).
2008-10-23 15:53:51 +00:00
malo
Minor cleanup of vap create work:
2008-05-12 00:15:30 +00:00
mc146818
mca
mcd
md
Add the possibility to specify "-o force" with "mdconfig -du".
2009-01-10 17:17:18 +00:00
mem
mfi
Change Dell's gen2 catch-all from Dell PERC H700/H800 to Dell PERC Gen2
2008-12-15 17:11:40 +00:00
mge
Handle mge(4) chip revision differences at run-time rather then compile time,
2009-01-08 11:09:27 +00:00
mii
Renamed the FRAMELEN macro to TRUEPHY_FRAMELEN as for powerpc
2008-11-28 23:44:13 +00:00
mk48txx
mlx
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
mly
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
mmc
Implement suspend/resume for mmc and mmcsd drivers.
2008-12-06 21:41:27 +00:00
mn
Move mn over. One of the last stragglers in sys/pci. There's no
2008-11-02 17:04:54 +00:00
mpt
Make the whole initiator mode part of mpt(4) endian-clean,
2009-01-07 21:52:47 +00:00
mse
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
msk
Save the value read from TX queue CSR, so we don't test against a
2008-11-24 02:21:50 +00:00
mxge
Restore sfence semantics in mxge after the introduction
2008-11-24 19:00:57 +00:00
my
Spelling fix for interupt -> interrupt
2007-10-12 06:03:46 +00:00
ncv
nfe
Fix a typo.
2008-12-20 00:04:04 +00:00
nge
Fix function prototype for device_shutdown method.
2007-11-22 02:45:00 +00:00
nmdm
Make nmdm(4) use MPSAFE callouts.
2008-11-19 21:07:33 +00:00
nsp
null
nve
Import rewritten nve device id's, which brings this more
2008-05-31 14:17:36 +00:00
nvram
- Use an sx lock to serialize writes since they update the checksum.
2008-08-01 20:39:18 +00:00
nxge
- bump __FreeBSD version to reflect added buf_ring, memory barriers,
2008-11-22 05:55:56 +00:00
ofw
Fix the OFW interrupt map parser to use its own idea of the number of interrupt
2009-01-03 19:38:47 +00:00
patm
Remove unused variable.
2008-11-26 13:44:11 +00:00
pbio
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
pccard
Define bits for memory mapping house keeping by bridges.
2009-01-05 20:58:41 +00:00
pccbb
Update to the interrupt handling code:
2008-12-11 06:27:18 +00:00
pcf
- Consolidate module version for the pcf module into just pcf.c instead
2008-08-05 17:39:37 +00:00
pci
Add ADMA, SATA and SAS mass storage subclasses reporting.
2008-11-13 19:57:33 +00:00
pcn
Call pcn_start_locked() instead of pcn_start() where the softc lock is
2009-01-03 10:56:10 +00:00
pdq
powermac_nvram
Convert PowerPC AIM PCI and nexus busses to standard OFW bus interface. This
2008-10-14 14:54:14 +00:00
ppbus
Various whitespace and style fixes.
2008-11-16 17:42:02 +00:00
ppc
Various whitespace and style fixes.
2008-11-16 17:42:02 +00:00
pst
puc
Add support for the Oxford OX16PCI958-based card.
2008-12-27 15:22:22 +00:00
quicc
Support for Freescale QUad Integrated Communications Controller.
2008-03-03 18:20:17 +00:00
ral
o use the new association callback to notify the driver when joining a bss
2008-10-27 16:46:50 +00:00
random
Make sure arc4random(9) is properly seeded when /etc/rc.d/initrandom returns.
2008-11-24 17:39:39 +00:00
ray
Fix a number of style issues in the MALLOC / FREE commit. I've tried to
2008-10-23 20:26:15 +00:00
rc
re
Since we don't request reset for rlphy(4), the link state 'UP'
2008-12-22 00:46:22 +00:00
rndtest
rp
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
safe
bandaid crash as I have no time to research the issue and the driver
2007-11-03 19:10:14 +00:00
sbni
Disable the inline assembly crc32 routine and use the C version instead.
2008-09-10 18:42:19 +00:00
scc
With rev 1.24 of sys/powerpc/powermac/macio.c, we now get a
2008-04-26 18:40:59 +00:00
scd
sdhci
Cleanup msleep() arguments.
2008-12-06 21:52:32 +00:00
sf
Fix build.
2008-01-21 09:51:28 +00:00
si
Pass 1 of mpsafetty-ifying si(4). It compiles and has basic functionality,
2008-09-08 11:41:20 +00:00
siba
Use some casting to get the right addresses. This is likely unwise
2008-09-26 05:40:56 +00:00
sio
Allow device hints to wire the unit numbers of devices.
2008-11-18 21:01:54 +00:00
sis
Fix a long standing VLAN tagged frame handling bug.
2008-12-09 04:30:47 +00:00
sk
Prefer NULL over integer 0 for pointer type.
2008-02-14 01:25:01 +00:00
smbus
- Store the device_t of the smbX device in the softc.
2008-06-06 18:45:32 +00:00
smc
- Move ether_ifdetach earlier.
2008-06-17 05:48:42 +00:00
sn
snc
Convert to new style PC Card front end driver. Add support for the
2008-08-07 20:55:20 +00:00
snp
Change ttyhook_register() second argument from thread to process pointer.
2008-12-13 21:17:46 +00:00
sound
Fix unwanted crosschannel mixing, possible on some codecs like
2009-01-11 12:04:18 +00:00
speaker
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
spibus
sr
Fix a number of style issues in the MALLOC / FREE commit. I've tried to
2008-10-23 20:26:15 +00:00
ste
Move the ste driver from sys/pci to sys/dev/ste.
2008-08-14 20:09:58 +00:00
stg
stge
Use m_collapse(9) to collapse mbuf chains instead of relying on
2008-01-18 08:32:08 +00:00
streams
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
sym
Use xpt_register_async() in order to remove code duplication.
2008-10-14 20:18:57 +00:00
syscons
Import yet some more small fixes to libteken sources:
2009-01-05 22:09:46 +00:00
tdfx
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
ti
Remove some remnant alpha hacks.
2008-04-26 14:13:48 +00:00
tl
Move the tl driver form sys/pci to sys/dev/tl.
2008-08-14 20:02:34 +00:00
trm
Prepare for future integration between CAM and newbus. xpt_bus_register
2007-06-17 05:55:54 +00:00
tsec
tsec: Refactor driver's structure.
2008-08-26 10:41:49 +00:00
twa
Limit DMA memory to lower addressable 4GB, without this patch, we
2008-10-06 22:34:17 +00:00
twe
Replace all calls to minor() with dev2unit().
2008-09-27 08:51:18 +00:00
tx
Use the parent device's DMA tag when creating our own DMA tags. This fixes
2008-09-12 14:41:53 +00:00
txp
Read MII_ANAR register and get common denominator ability.
2007-11-16 10:32:10 +00:00
uart
De-hard code UART speed setting for Marvell SOCs when hw.uart.console is not
2009-01-08 13:24:25 +00:00
ubsec
usb
Readd the Alcor Transcend device which is referenced in usb2/storage/umass2.c,
2009-01-09 04:38:22 +00:00
usb2
More usb2 foma driver update.
2009-01-12 20:13:14 +00:00
utopia
Fix a use-after-free.
2007-12-05 19:32:59 +00:00
vge
Fix Rx/Tx checksum offload ioctl handling. Now checksum offload
2008-11-13 04:11:01 +00:00
vkbd
Remove unit2minor() use from kernel code.
2008-09-26 14:19:52 +00:00
vr
It seems there are still issues on multicast perfect filtering.
2008-12-12 01:26:11 +00:00
vx
MFp4: Network Adapter is redundant.
2008-08-25 05:20:17 +00:00
watchdog
wb
Move wb driver from sys/pci to sys/dev/wb.
2008-08-14 21:26:29 +00:00
wds
Prepare for future integration between CAM and newbus. xpt_bus_register
2007-06-17 05:55:54 +00:00
wi
Remove opt_wi.h
2008-08-27 05:39:44 +00:00
wl
wpi
o use the new association callback to notify the driver when joining a bss
2008-10-27 16:46:50 +00:00
xe
Style(9) xe(4). The MD5 sums are different, but comparing the dissassemblies
2008-06-04 20:26:57 +00:00
xen
merge 186535, 186537, and 186538 from releng_7_xen
2008-12-29 06:31:03 +00:00
xl
Move the xl driver form sys/pci to sys/dev/xl for consistency.
2008-08-10 09:45:52 +00:00