Gleb Smirnoff eb1b1807af Mechanically substitute flags from historic mbuf allocator with ... malloc(9) flags within sys. Exceptions: - sys/contrib not touched - sys/mbuf.h edited manually		2012-12-05 08:04:20 +00:00
..
at91_aicreg.h	Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201.	2010-07-14 00:48:53 +00:00
at91_cfata.c	Eliminate devclass_find_free_unit call here, since -1 gives the same	2009-06-10 17:39:19 +00:00
at91_machdep.c	Reduce differences between these two initarms a bit more.	2012-11-08 04:02:36 +00:00
at91_mci.c	Make this work on the AT91SAM9G20:	2012-08-29 06:42:39 +00:00
at91_mcireg.h	- Add support for MCI1 revision 2xx controllers and a work-around for their	2012-04-22 00:43:32 +00:00
at91_pdcreg.h	Tweak the disclaimer section of the license to match COPYRIGHT, for	2008-11-25 00:13:26 +00:00
at91_pio_sam9g20.h	Add support for the AT91SAM9260	2010-10-06 22:40:27 +00:00
at91_pio_sam9g45.h	Add support for the Atmel AT91SAM9G45 CPU.	2012-07-26 08:01:25 +00:00
at91_pio.c	Throw this debug behind bootverbose. The information isn't all that	2012-06-16 04:34:46 +00:00
at91_pioreg.h	Hack to unbreak boot2 for at91rm9200 boot loader. When the at91sam	2012-05-11 14:40:25 +00:00
at91_piovar.h	- Try to bring these files closer to style(9).	2012-04-14 11:29:32 +00:00
at91_pit.c	at91pit->at91_pit for consistnecy with other drivers.	2012-07-11 17:11:54 +00:00
at91_pitreg.h	at91pit->at91_pit for consistnecy with other drivers.	2012-07-11 17:11:54 +00:00
at91_pmc.c	Make some at91_pcm_xxx() functions NULL safe.	2012-08-21 19:55:24 +00:00
at91_pmcreg.h	Add charge pump current register.	2012-08-10 04:47:20 +00:00
at91_pmcvar.h	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91_reset.S	Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way	2012-07-10 02:14:50 +00:00
at91_rst.c	at91$DEV->at91_$DEV to match other Atmel drivers. Also, export	2012-07-11 17:11:07 +00:00
at91_rstreg.h	at91$DEV->at91_$DEV to match other Atmel drivers. Also, export	2012-07-11 17:11:07 +00:00
at91_rtc.c	Loop reading the RTC registers until the same values are obtained	2012-10-07 20:36:46 +00:00
at91_rtcreg.h	Use the RTC unit to get the time. This works on all known AT91SAM9*	2012-10-07 01:58:32 +00:00
at91_spi.c	Fetch the chip select in the bridge driver, like all the other spi	2012-08-23 22:38:37 +00:00
at91_spireg.h	- Prepend the device description with "AT91" to reflect its nature. [1]	2012-06-03 00:54:10 +00:00
at91_ssc.c	Strip trailing whitespace before other changes.	2012-06-13 04:52:19 +00:00
at91_sscreg.h	Tweak the disclaimer section of the license to match COPYRIGHT, for	2008-11-25 00:13:26 +00:00
at91_st.c	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91_streg.h	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91_twi.c	Fix a stray debug that I committed accidentally years ago...	2012-06-22 06:44:22 +00:00
at91_twiio.h	Tweak the disclaimer section of the license to match COPYRIGHT, for	2008-11-25 00:13:26 +00:00
at91_twireg.h	Add support for the Atmel SAM9XE familiy of microcontrollers, which	2012-04-14 17:09:38 +00:00
at91_usartreg.h	Tweak the disclaimer section of the license to match COPYRIGHT, for	2008-11-25 00:13:26 +00:00
at91_wdt.c	Add support for the Atmel SAM9XE familiy of microcontrollers, which	2012-04-14 17:09:38 +00:00
at91_wdtreg.h	Strip trailing whitespace before other changes.	2012-06-13 04:52:19 +00:00
at91.c	Move unmask IRQ function call up to nexus device level.	2012-07-17 03:18:12 +00:00
at91board.h	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
at91reg.h	The system IRQ is always IRQ 1. Make it so.	2012-07-10 02:39:03 +00:00
at91rm92reg.h	Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way	2012-07-10 02:14:50 +00:00
at91rm9200_devices.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
at91rm9200.c	Complete the transition away from newbus to populate the children to	2012-07-12 13:45:58 +00:00
at91rm9200var.h	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
at91sam9g20.c	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91sam9g20reg.h	Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way	2012-07-10 02:14:50 +00:00
at91sam9g45.c	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91sam9g45reg.h	Add support for the Atmel AT91SAM9G45 CPU.	2012-07-26 08:01:25 +00:00
at91sam9x5.c	Correct the PLLA setting functions and centralize.	2012-08-11 05:45:19 +00:00
at91sam9x5reg.h	These files will support the whole at91sam9x5 family when done,	2012-07-30 21:30:43 +00:00
at91sam9260.c	Update comments about setting PLLA and refernce the tables in the	2012-08-11 05:12:46 +00:00
at91sam9260reg.h	Missed one of the special AT91SAM9xxx_BASE defines. This should be	2012-07-10 02:44:15 +00:00
at91soc.c	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91soc.h	Make the SoC stuff a little more modular, and start to move away from	2012-07-11 20:17:14 +00:00
at91var.h	Remember where we found the DBGU and use that for our console.	2012-07-12 19:11:37 +00:00
board_bwct.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_eb9200.c	Preliminary Embest ATEB9200 support.	2012-08-16 05:03:59 +00:00
board_ethernut5.c	uboot should be telling us it is an ETHERNUT5 for this board. Tag it	2012-07-14 06:00:37 +00:00
board_hl200.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_hl201.c	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
board_kb920x.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
board_qila9g20.c	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
board_sam9g20ek.c	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
board_sam9x25ek.c	Create a generic way to support multiple boards within an	2012-07-07 05:02:39 +00:00
board_sam9260ek.c	Turns out the ETHERNUT5 isn't anything like the SAM9260-EK. Make this	2012-07-27 05:33:55 +00:00
board_sn9g45.c	Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel.	2012-07-27 16:38:02 +00:00
board_tsc4370.c	Configure the peripheral pins for MCI devices. Eliminate the now-unused	2012-07-15 05:41:43 +00:00
files.at91	Unbreak building a kernel with EHCI: there's no ehci_atmelarm.c.	2012-11-26 23:30:47 +00:00
if_ate.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
if_atereg.h	if_ate.c:	2010-10-06 22:25:21 +00:00
if_macb.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-05 08:04:20 +00:00
if_macbreg.h	Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201.	2010-07-14 00:48:53 +00:00
if_macbvar.h	Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201.	2010-07-14 00:48:53 +00:00
std.at91	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.at91sam9	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.at91sam9g45	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.atmel	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
std.bwct	Convert BWCT and HL200 over to new board mechanism as well. The	2008-11-25 19:05:46 +00:00
std.eb9200	Preliminary Embest ATEB9200 support.	2012-08-16 05:03:59 +00:00
std.ethernut5	Opt-in rather than opt-out of the SoC. We don't really support	2012-07-01 06:34:17 +00:00
std.hl200	Compute the master clock frequency, so we no longer need to have it	2012-05-29 03:23:18 +00:00
std.hl201	Opt-in rather than opt-out of the SoC. We don't really support	2012-07-01 06:34:17 +00:00
std.kb920x	Compute the master clock frequency, so we no longer need to have it	2012-05-29 03:23:18 +00:00
std.qila9g20	Opt-in rather than opt-out of the SoC. We don't really support	2012-07-01 06:34:17 +00:00
std.sam9g20ek	Opt-in rather than opt-out of the SoC. We don't really support	2012-07-01 06:34:17 +00:00
std.sam9x25ek	These files will support the whole at91sam9x5 family when done,	2012-07-30 21:30:43 +00:00
std.sam9260ek	Add preliminary support for Atmel SAM9260-EK evaluation kit.	2012-07-14 06:13:23 +00:00
std.sn9g45	Add support for the DesignA Electronics Snapper9g45 System on Module.	2012-07-26 08:05:28 +00:00
std.tsc4370	Convert BWCT and HL200 over to new board mechanism as well. The	2008-11-25 19:05:46 +00:00
uart_bus_at91usart.c	Some models have 6 USARTS + DBGU. Set a consistent name.	2012-07-26 05:46:56 +00:00
uart_cpu_at91usart.c	This file is no longer AT91RM9200 specific, but now is generic to all	2012-07-12 19:15:38 +00:00
uart_dev_at91usart.c	- Add missing locking in at91_usart_getc().	2012-05-01 20:42:03 +00:00