..
aac
When masking direct and processor devices during an inquiry, properly
2010-12-06 17:06:21 +00:00
acpi_support
acpi_fujitsu: update for P8010
2010-12-11 10:55:18 +00:00
acpica
Small style fixes:
2010-12-16 17:05:28 +00:00
adb
Add support for interpreting taps on ADB touchpads as a button click.
2009-11-28 17:48:25 +00:00
adlink
Update d_mmap() to accept vm_ooffset_t and vm_memattr_t.
2009-12-29 21:51:28 +00:00
advansys
ae
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
age
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
agp
Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC
2010-10-31 18:27:05 +00:00
aha
ahb
ahci
Add IDs of HighPoint RocketRAID 62x cards (Marvell 88SE9128 chips).
2010-12-08 20:35:20 +00:00
aic
aic7xxx
Revert r213765. This is required because our build infrastructure uses
2010-10-14 19:19:19 +00:00
alc
Remove unecessary and clearly wrong usage of atomic(9).
2010-12-10 21:43:20 +00:00
ale
Remove unecessary and clearly wrong usage of atomic(9).
2010-12-14 17:39:10 +00:00
amd
Remove extraneous semicolons, no functional changes.
2010-01-07 21:01:37 +00:00
amdsbwd
amdsbwd: fix nonsensical timeout calculations
2010-05-31 09:07:23 +00:00
amdtemp
Restore (undocumented) support for early revisions and add more comments.
2009-09-14 23:08:19 +00:00
amr
Fix clang warning on empty statement.
2010-07-28 16:24:11 +00:00
an
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
arcmsr
Workaround build for PAE case for now - revert the PHYS
2010-11-14 05:05:41 +00:00
asmc
Use %zu for size_t.
2009-09-14 21:33:00 +00:00
asr
Don't zero 'Info' after setting it up in the ASR_IOCTL_COMPAT case.
2010-11-25 21:51:43 +00:00
ata
Several chipset drivers alter parameters relevant for the DMA tag creation,
2010-11-28 18:53:29 +00:00
ath
Fix indenting/whitespace issues introduced by me.
2010-08-15 11:40:53 +00:00
atkbdc
- If the atkbdc device is assigned an IRQ resource by ACPI or the PnPBIOS,
2010-12-16 17:14:37 +00:00
auxio
Enroll these drivers in multipass probing. The motivation behind this
2009-12-22 21:02:46 +00:00
bce
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
bfe
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
bge
- Remove the remaining support for older (in this case pre-7.0-RELEASE)
2010-11-30 21:08:59 +00:00
bktr
Fix build on architectures where PAGE_SIZE is a long (sparc64, powerpc).
2010-07-13 19:27:20 +00:00
bm
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
buslogic
bwi
Instead of using the AMRR ratectl algo as default for drivers which have
2010-11-06 18:17:20 +00:00
bwn
Fix double ;;
2010-12-06 10:24:06 +00:00
cardbus
Move the PCI-specific logic of removing a cardbus device into a
2010-01-05 20:42:25 +00:00
cas
- Fix and enable support for flow control.
2010-11-22 22:06:30 +00:00
ce
Revert r213793.
2010-10-13 17:38:23 +00:00
cfe
Start using the 'init_static_kenv()' API provided by r198561 to initialize
2010-08-11 02:13:50 +00:00
cfi
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
ciss
Cosmetic: make it less confusing when displaying RAID 1 level, that might
2010-10-02 08:18:19 +00:00
cm
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cmx
coretemp
Catch known CPUs before using IA32_TEMPERATURE_TARGET.
2010-08-04 00:25:13 +00:00
cp
Revert r213793.
2010-10-13 17:38:23 +00:00
cpuctl
cpufreq
cs
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ct
Spell "Hz" correctly wherever it is user-visible.
2010-01-12 17:59:58 +00:00
ctau
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cx
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cxgb
fix incorrect use of atomic_set_xxx in cxgb
2010-12-11 10:14:08 +00:00
cy
dc
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 23:34:31 +00:00
dcons
de
Remove extraneous semicolons, no functional changes.
2010-01-07 21:01:37 +00:00
digi
dpms
Attach dpms(4) to vgapm and make sure to restore DPMS state after
2009-12-15 19:58:23 +00:00
dpt
Get rid of #ident, GCC 4.4 warns about it being deprecated.
2010-01-08 17:20:41 +00:00
drm
fix atomic_set_xxx misuse in drm
2010-12-11 10:18:05 +00:00
e1000
Correct build error.
2010-12-04 06:38:21 +00:00
ed
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
eisa
en
ep
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
esp
Include <machine/ofw_machdep.h> for OF_getscsinitid().
2010-05-10 20:02:39 +00:00
et
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
ex
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
exca
CardBus instead of cardbus.
2010-01-03 23:26:29 +00:00
fatm
Remove extraneous semicolons, no functional changes.
2010-01-07 21:01:37 +00:00
fb
Fix segment:offset calculation of interrupt vector for relocated video BIOS
2010-09-13 19:58:46 +00:00
fdc
Fix a regression from r200554, which broke fdc(4) attachment to acpi(4).
2010-05-30 03:45:41 +00:00
fdt
Eliminate FDT_IMMR_VA define.
2010-07-19 18:47:18 +00:00
fe
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
firewire
Remove references to MAKEDEV(8)
2010-11-15 05:25:51 +00:00
flash
Add s25sl064a, an 8mb SPI flash part.
2010-08-17 16:27:13 +00:00
fxp
If RX lockup workaround is enabled, fxp(4) will periodically reset
2010-12-02 03:53:29 +00:00
gem
- Fix and enable support for flow control.
2010-11-22 22:13:26 +00:00
glxsb
gpio
Add a GPIO driver for the Gateworks Cambria platform.
2010-11-11 20:18:33 +00:00
hatm
Remove extraneous semicolons, no functional changes.
2010-01-07 21:01:37 +00:00
hifn
- Do not place variables to memory allocated by busdma. pre/post ops
2010-09-24 04:46:46 +00:00
hme
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
hptiop
Report transport type in XPT_PATH_INQ.
2010-06-19 13:41:17 +00:00
hptmv
Report transport type in XPT_PATH_INQ.
2010-06-19 13:42:14 +00:00
hptrr
Pass a format string to make_dev().
2010-10-13 14:41:52 +00:00
hwpmc
Fix two aliases that had the same name but were pointing to different
2010-10-04 17:22:18 +00:00
ic
Merge from projects/mips to head by hand:
2010-01-11 04:13:06 +00:00
ichsmb
Add support for Intel Cougar Point SMBus controller.
2010-08-27 23:24:08 +00:00
ichwd
Use convenience macro for minimum and maximum value capping when
2010-12-08 15:32:54 +00:00
ida
ie
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ieee488
Implement more of __ibsta: END and SRQI status bits (taken out of the
2010-12-10 22:20:11 +00:00
if_ndis
Use bus_alloc_resource_any() instead of bus_alloc_resource(). Besides being
2010-12-16 15:19:32 +00:00
iicbus
On the Xserve G5 we find the LM75 instead of the DS1775. The core
2010-12-10 20:27:50 +00:00
iir
Get rid of #ident.
2010-01-08 20:40:28 +00:00
io
- Extract the IODEV_PIO interface from ia64 and make it MI.
2010-04-28 15:38:01 +00:00
ipmi
Fix test for double-nul characters that terminate the string table at
2010-07-29 13:46:37 +00:00
ips
Fix argument order in a call to mtx_init.
2009-12-17 00:21:12 +00:00
ipw
Enable 5.5 and 11Mbit TX rates.
2010-05-11 17:14:17 +00:00
iscsi /initiator
Remove the freelist, which simply duplicates some of the zone allocator's
2010-09-02 14:13:43 +00:00
isp
Partially revert 208119. We were overwriting tunable settings.
2010-11-27 20:33:08 +00:00
ispfw
Don't spam dmesg with "registered firmware ..." when module is compiled
2010-03-05 03:37:42 +00:00
iwi
The firmware does pad notifications to an even number of bytes (at least
2010-10-23 11:26:22 +00:00
iwn
Fixes for monitor mode:
2010-12-06 18:28:39 +00:00
ixgb
Do not allocate multicast array memory in multicast filter
2010-08-28 00:34:22 +00:00
ixgbe
This small little change is a bug that drove me nuts
2010-12-04 01:43:38 +00:00
jme
Remove unecessary and clearly wrong usage of atomic(9).
2010-12-10 21:43:20 +00:00
joy
kbd
Explicitly tell the compiler that we don't care about the return value
2010-10-13 11:37:12 +00:00
kbdmux
Explicitly tell the compiler that we don't care about the return value
2010-10-13 11:37:12 +00:00
ksyms
Update d_mmap() to accept vm_ooffset_t and vm_memattr_t.
2009-12-29 21:51:28 +00:00
le
Use SYS_RES_IOPORT instead of PCIM_CMD_PORTEN when calling pci_enable_io.
2010-12-10 15:05:49 +00:00
led
Fix an incorrect use of sbuf_overflowed() after a call to sbuf_finish().
2010-09-09 18:35:08 +00:00
lge
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
lindev
lindev(4) [1] is supposed to be a collection of linux-specific pseudo
2009-09-26 12:45:28 +00:00
lmc
One more #ifdef fix for GCC 4.4.
2010-01-08 15:57:56 +00:00
malo
Fix firmware module dependencies.
2010-09-10 08:11:48 +00:00
mc146818
Remove clause 3 from Izumi Tsutsui's licenses.
2009-12-25 22:58:43 +00:00
mca
mcd
md
Allow the MDIOCATTACH ioctl operation to originate from within the kernel.
2010-10-18 04:26:32 +00:00
mem
mfi
When masking direct and processor devices during an inquiry, properly
2010-12-06 17:02:56 +00:00
mge
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
mii
Allow pause support advertisement to be turned off again.
2010-11-27 01:26:59 +00:00
mk48txx
Fix botches in r201005:
2010-01-01 22:47:53 +00:00
mlx
Temporarily revert the new-bus locking for 8.0 release. It will be
2009-08-20 19:17:53 +00:00
mly
MFp4: Large set of CAM inprovements.
2010-01-28 08:41:30 +00:00
mmc
Report relative card address to NewBus as location string.
2010-05-23 09:44:48 +00:00
mn
mps
Fix setting LUN numbers in the mps(4) driver.
2010-12-11 00:36:35 +00:00
mpt
Use the correct variable for determining the verbosity level in mpt_lprtc().
2010-11-14 22:34:33 +00:00
mse
msk
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
mvs
Workaround strange situation when EDMA_RESQIP register returns zero instead
2010-10-20 07:47:31 +00:00
mwl
Fix firmware module dependencies.
2010-09-10 08:11:48 +00:00
mxge
Fix a TSO checksum bug on mxge(4):
2010-11-22 16:43:05 +00:00
my
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ncv
nfe
MCP55 is the only NVIDIA controller that supports VLAN tag
2010-11-17 18:09:02 +00:00
nge
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
nmdm
nsp
null
Mark /dev/zero and /dev/null as eternal.
2010-08-06 09:47:48 +00:00
nve
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
nvram
nxge
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ofw
Return IEEE 1275 compliant error codes.
2010-11-11 13:42:46 +00:00
patm
Remove extraneous semicolons, no functional changes.
2010-01-07 21:01:37 +00:00
pbio
pccard
Fix typos.
2010-11-09 10:59:09 +00:00
pccbb
Temporarily revert the new-bus locking for 8.0 release. It will be
2009-08-20 19:17:53 +00:00
pcf
pci
Add device IDs for two more ServerWorks Host-PCI bridges so that we can
2010-11-25 15:42:33 +00:00
pcn
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
pdq
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
powermac_nvram
Add support for the Sharp/Micron flash chips to powermac_mvram(4).
2010-09-05 20:04:02 +00:00
ppbus
bus_add_child: change type of order parameter to u_int
2010-09-10 11:19:03 +00:00
ppc
Add PCI ID for MCS9901's parallel port.
2010-03-23 20:08:18 +00:00
pst
Temporarily revert the new-bus locking for 8.0 release. It will be
2009-08-20 19:17:53 +00:00
pty
Move ptmx into pty(4).
2009-09-06 10:27:45 +00:00
puc
Add support for the Perle Speed4 LE.
2010-05-20 13:16:42 +00:00
quicc
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
ral
Instead of using the AMRR ratectl algo as default for drivers which have
2010-11-06 18:17:20 +00:00
random
Use the fpu_kern_enter() interface to properly separate usermode FPU
2010-06-05 16:00:53 +00:00
rc
re
Add flow control for all re(4) controllers. re(4) controllers do
2010-11-15 00:06:19 +00:00
rndtest
rp
These checks against BUSY aren't needed: the newbus layer does this
2009-09-05 08:38:25 +00:00
safe
Remove extraneous semicolons, no functional changes.
2010-01-07 21:01:37 +00:00
sbni
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
scc
scd
sdhci
sec
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
sf
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
sge
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
si
siba
Fix double ;;
2010-12-06 10:24:06 +00:00
siis
Teach ahci(4), siis(4) and ATA_CAM ata(4) wrapper report to CAM residual
2010-11-08 15:36:15 +00:00
sio
sis
Fix double ;;
2010-12-06 10:24:06 +00:00
sk
Fix a long standing bug in programming station address for Yukon
2010-11-06 22:07:22 +00:00
smbus
smc
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
sn
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
snc
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
snp
Add ttydisc_rint_simple().
2009-08-23 08:04:40 +00:00
sound
Fix typos.
2010-11-09 10:59:09 +00:00
speaker
spibus
bus_add_child: change type of order parameter to u_int
2010-09-10 11:19:03 +00:00
ste
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
stg
stge
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
streams
sym
- On sparc64 obtain the initiator ID from the Open Firmware device tree
2010-04-27 18:05:33 +00:00
syscons
Rename a variable to match scvidctl.c.
2010-11-30 17:34:15 +00:00
tdfx
Remove references to MAKEDEV(8)
2010-11-15 05:25:51 +00:00
ti
Neither the page lock nor the page queues lock is required to unwire and
2010-05-03 15:51:59 +00:00
tl
- Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective
2010-10-24 12:51:02 +00:00
tpm
Add tpm(4) driver for Trusted Platform Module.
2010-08-12 00:16:18 +00:00
trm
MFp4: Large set of CAM inprovements.
2010-01-28 08:41:30 +00:00
tsec
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
twa
Fix a compile problem introduced with r212008 on 32bit:
2010-09-04 16:27:14 +00:00
twe
Teach twe driver to report array stripe size to GEOM.
2009-12-25 17:34:43 +00:00
tx
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
txp
Make sure rx descriptor ring align on 16 bytes. I guess the
2009-08-31 22:09:48 +00:00
uart
Fix typos.
2010-11-09 10:59:09 +00:00
ubsec
Cast the bus_size_t to a intmax_t rather than assuming type-punning to
2010-03-29 17:26:24 +00:00
usb
r184610 changed the way how TX frames are handled on AX88178 and
2010-12-08 01:24:05 +00:00
utopia
vge
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
vkbd
vr
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
vx
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
watchdog
wb
Fix indentation in r213894.
2010-11-07 12:29:26 +00:00
wds
wi
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
wl
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
wpi
Fix scanning after loosing a connection. The firmware assumes that as long
2010-12-06 19:05:44 +00:00
xe
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
xen
Set correct maximum I/O length. We can only handle I/O of up to
2010-12-06 20:40:15 +00:00
xl
Add flow control for 3C905B and newer controllers. Note, these
2010-11-14 23:53:13 +00:00
ce7a3e4774