d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3747c1ffc7
freebsd-nq/sys/dev/cxgbe/t4_sge.c

5215 lines
136 KiB
C
Raw Normal View History

cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*-
sys/dev: further adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
* Copyright (c) 2011 Chelsio Communications, Inc.
* All rights reserved.
* Written by: Navdeep Parhar <np@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
#include "opt_inet6.h"
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include <sys/types.h>
Include necessary headers that now are available due to pollution via if_var.h. Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-28 07:29:16 +00:00
#include <sys/eventhandler.h>
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/kernel.h>
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
#include <sys/malloc.h>
#include <sys/queue.h>
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
#include <sys/sbuf.h>
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
#include <sys/taskqueue.h>
Merge r254386 from user/np/cxl_tuning. Add an INET|INET6 check missing in said revision. r254386: Flush inactive LRO entries periodically.
2013-08-29 06:26:22 +00:00
#include <sys/time.h>
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
#include <sys/sglist.h>
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include <sys/sysctl.h>
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#include <sys/smp.h>
cxgbe(4): Keep track of the clusters that have to be freed by the custom free routine (rxb_free) in the driver. Fail MOD_UNLOAD with EBUSY if any such cluster has been handed up to the kernel but hasn't been freed yet. This prevents a panic later when the cluster finally needs to be freed but rxb_free is gone from the kernel. MFC after: 1 week
2014-07-23 22:29:22 +00:00
#include <sys/counter.h>
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include <net/bpf.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_vlan_var.h>
#include <netinet/in.h>
#include <netinet/ip.h>
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
#include <netinet/ip6.h>
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include <netinet/tcp.h>
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
#include <machine/in_cksum.h>
Fix kernel build on amd64 after r256118, since the machine/md_var.h header is not implicitly included there. So include it explicitly. Approved by: re (delphij) Pointy hat to: dim MFC after: 3 days X-MFC-With: r256118
2013-10-07 22:30:03 +00:00
#include <machine/md_var.h>
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
#include <vm/vm.h>
#include <vm/pmap.h>
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
#ifdef DEV_NETMAP
#include <machine/bus.h>
#include <sys/selinfo.h>
#include <net/if_var.h>
#include <net/netmap.h>
#include <dev/netmap/netmap_kern.h>
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include "common/common.h"
#include "common/t4_regs.h"
#include "common/t4_regs_values.h"
#include "common/t4_msg.h"
cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications
2016-07-05 01:29:24 +00:00
#include "t4_l2t.h"
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
#include "t4_mp_ring.h"
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
#ifdef T4_PKT_TIMESTAMP
#define RX_COPY_THRESHOLD (MINCLSIZE - 8)
#else
#define RX_COPY_THRESHOLD MINCLSIZE
#endif
Convert some fixed parameters to tunables (with reasonable default values). - cong_drop specifies what to do on congestion: nothing, backpressure, or drop. - fl_pktshift specifies the padding before Ethernet payload. - fl_pad specifies the boundary upto which to pad Ethernet payload. - spg_len controls the length of the status page. MFC after: 2 weeks
2012-08-14 21:47:41 +00:00
/*
* Ethernet frames are DMA'd at this byte offset into the freelist buffer.
* 0-7 are valid values.
*/
Mark spg_len and fl_pktshift static. These variables are no longer exported to t4_netmap.c after r296478.
2016-07-28 17:37:12 +00:00
static int fl_pktshift = 2;
Convert some fixed parameters to tunables (with reasonable default values). - cong_drop specifies what to do on congestion: nothing, backpressure, or drop. - fl_pktshift specifies the padding before Ethernet payload. - fl_pad specifies the boundary upto which to pad Ethernet payload. - spg_len controls the length of the status page. MFC after: 2 weeks
2012-08-14 21:47:41 +00:00
TUNABLE_INT("hw.cxgbe.fl_pktshift", &fl_pktshift);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Convert some fixed parameters to tunables (with reasonable default values). - cong_drop specifies what to do on congestion: nothing, backpressure, or drop. - fl_pktshift specifies the padding before Ethernet payload. - fl_pad specifies the boundary upto which to pad Ethernet payload. - spg_len controls the length of the status page. MFC after: 2 weeks
2012-08-14 21:47:41 +00:00
/*
* Pad ethernet payload up to this boundary.
* -1: driver should figure out a good value.
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
* 0: disable padding.
* Any power of 2 from 32 to 4096 (both inclusive) is also a valid value.
Convert some fixed parameters to tunables (with reasonable default values). - cong_drop specifies what to do on congestion: nothing, backpressure, or drop. - fl_pktshift specifies the padding before Ethernet payload. - fl_pad specifies the boundary upto which to pad Ethernet payload. - spg_len controls the length of the status page. MFC after: 2 weeks
2012-08-14 21:47:41 +00:00
*/
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
int fl_pad = -1;
Convert some fixed parameters to tunables (with reasonable default values). - cong_drop specifies what to do on congestion: nothing, backpressure, or drop. - fl_pktshift specifies the padding before Ethernet payload. - fl_pad specifies the boundary upto which to pad Ethernet payload. - spg_len controls the length of the status page. MFC after: 2 weeks
2012-08-14 21:47:41 +00:00
TUNABLE_INT("hw.cxgbe.fl_pad", &fl_pad);
/*
* Status page length.
* -1: driver should figure out a good value.
* 64 or 128 are the only other valid values.
*/
Mark spg_len and fl_pktshift static. These variables are no longer exported to t4_netmap.c after r296478.
2016-07-28 17:37:12 +00:00
static int spg_len = -1;
Convert some fixed parameters to tunables (with reasonable default values). - cong_drop specifies what to do on congestion: nothing, backpressure, or drop. - fl_pktshift specifies the padding before Ethernet payload. - fl_pad specifies the boundary upto which to pad Ethernet payload. - spg_len controls the length of the status page. MFC after: 2 weeks
2012-08-14 21:47:41 +00:00
TUNABLE_INT("hw.cxgbe.spg_len", &spg_len);
/*
* Congestion drops.
* -1: no congestion feedback (not recommended).
* 0: backpressure the channel instead of dropping packets right away.
* 1: no backpressure, drop packets for the congested queue immediately.
*/
static int cong_drop = 0;
TUNABLE_INT("hw.cxgbe.cong_drop", &cong_drop);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
/*
* Deliver multiple frames in the same free list buffer if they fit.
* -1: let the driver decide whether to enable buffer packing or not.
* 0: disable buffer packing.
* 1: enable buffer packing.
*/
static int buffer_packing = -1;
TUNABLE_INT("hw.cxgbe.buffer_packing", &buffer_packing);
/*
* Start next frame in a packed buffer at this boundary.
* -1: driver should figure out a good value.
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
* T4: driver will ignore this and use the same value as fl_pad above.
* T5: 16, or a power of 2 from 64 to 4096 (both inclusive) is a valid value.
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
*/
static int fl_pack = -1;
TUNABLE_INT("hw.cxgbe.fl_pack", &fl_pack);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/*
* Allow the driver to create mbuf(s) in a cluster allocated for rx.
* 0: never; always allocate mbufs from the zone_mbuf UMA zone.
* 1: ok to create mbuf(s) within a cluster if there is room.
*/
static int allow_mbufs_in_cluster = 1;
TUNABLE_INT("hw.cxgbe.allow_mbufs_in_cluster", &allow_mbufs_in_cluster);
/*
* Largest rx cluster size that the driver is allowed to allocate.
*/
static int largest_rx_cluster = MJUM16BYTES;
TUNABLE_INT("hw.cxgbe.largest_rx_cluster", &largest_rx_cluster);
/*
* Size of cluster allocation that's most likely to succeed. The driver will
* fall back to this size if it fails to allocate clusters larger than this.
*/
static int safest_rx_cluster = PAGE_SIZE;
TUNABLE_INT("hw.cxgbe.safest_rx_cluster", &safest_rx_cluster);
cxgbe: Add a tunable to configure the SGE time scaler, which is available starting with T6. The values in the timer holdoff registers are multiplied by the scaling factor before use. dev.<nexus>.<n>.holdoff_timers shows the final values of the timers in microseconds. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-15 17:00:50 +00:00
/*
* The interrupt holdoff timers are multiplied by this value on T6+.
* 1 and 3-17 (both inclusive) are legal values.
*/
static int tscale = 1;
TUNABLE_INT("hw.cxgbe.tscale", &tscale);
cxgbe: Add tunables to control the number of LRO entries and the number of rx mbufs that should be presorted before LRO. There is no change in default behavior. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-17 09:00:20 +00:00
/*
* Number of LRO entries in the lro_ctrl structure per rx queue.
*/
static int lro_entries = TCP_LRO_ENTRIES;
TUNABLE_INT("hw.cxgbe.lro_entries", &lro_entries);
/*
* This enables presorting of frames before they're fed into tcp_lro_rx.
*/
static int lro_mbufs = 0;
TUNABLE_INT("hw.cxgbe.lro_mbufs", &lro_mbufs);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct txpkts {
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
u_int wr_type; /* type 0 or type 1 */
u_int npkt; /* # of packets in this work request */
u_int plen; /* total payload (sum of all packets) */
u_int len16; /* # of 16B pieces used by this work request */
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
};
/* A packet's SGL. This + m_pkthdr has all info needed for tx */
struct sgl {
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
struct sglist sg;
struct sglist_seg seg[TX_SGL_SEGS];
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
};
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int service_iq(struct sge_iq *, int);
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
static struct mbuf *get_fl_payload(struct adapter *, struct sge_fl *, uint32_t);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int t4_eth_rx(struct sge_iq *, const struct rss_header *, struct mbuf *);
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
static inline void init_iq(struct sge_iq *, struct adapter *, int, int, int);
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
static inline void init_fl(struct adapter *, struct sge_fl *, int, int, char *);
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
static inline void init_eq(struct adapter *, struct sge_eq *, int, int, uint8_t,
uint16_t, char *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int alloc_ring(struct adapter *, size_t, bus_dma_tag_t *, bus_dmamap_t *,
bus_addr_t *, void **);
static int free_ring(struct adapter *, bus_dma_tag_t, bus_dmamap_t, bus_addr_t,
void *);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int alloc_iq_fl(struct vi_info *, struct sge_iq *, struct sge_fl *,
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
int, int);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int free_iq_fl(struct vi_info *, struct sge_iq *, struct sge_fl *);
cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. Sponsored by: Chelsio Communications
2017-12-29 02:30:21 +00:00
static void add_iq_sysctls(struct sysctl_ctx_list *, struct sysctl_oid *,
struct sge_iq *);
cxgbe(4): Make the location/length of all descriptor rings available in the sysctl MIB.
2016-09-23 20:03:28 +00:00
static void add_fl_sysctls(struct adapter *, struct sysctl_ctx_list *,
struct sysctl_oid *, struct sge_fl *);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int alloc_fwq(struct adapter *);
static int free_fwq(struct adapter *);
static int alloc_mgmtq(struct adapter *);
static int free_mgmtq(struct adapter *);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int alloc_rxq(struct vi_info *, struct sge_rxq *, int, int,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid *);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int free_rxq(struct vi_info *, struct sge_rxq *);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int alloc_ofld_rxq(struct vi_info *, struct sge_ofld_rxq *, int, int,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid *);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int free_ofld_rxq(struct vi_info *, struct sge_ofld_rxq *);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
#ifdef DEV_NETMAP
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int alloc_nm_rxq(struct vi_info *, struct sge_nm_rxq *, int, int,
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
struct sysctl_oid *);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int free_nm_rxq(struct vi_info *, struct sge_nm_rxq *);
static int alloc_nm_txq(struct vi_info *, struct sge_nm_txq *, int, int,
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
struct sysctl_oid *);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int free_nm_txq(struct vi_info *, struct sge_nm_txq *);
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
#endif
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int ctrl_eq_alloc(struct adapter *, struct sge_eq *);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int eth_eq_alloc(struct adapter *, struct vi_info *, struct sge_eq *);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int ofld_eq_alloc(struct adapter *, struct vi_info *, struct sge_eq *);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int alloc_eq(struct adapter *, struct vi_info *, struct sge_eq *);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int free_eq(struct adapter *, struct sge_eq *);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int alloc_wrq(struct adapter *, struct vi_info *, struct sge_wrq *,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid *);
static int free_wrq(struct adapter *, struct sge_wrq *);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int alloc_txq(struct vi_info *, struct sge_txq *, int,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid *);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
static int free_txq(struct vi_info *, struct sge_txq *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static void oneseg_dma_callback(void *, bus_dma_segment_t *, int, int);
static inline void ring_fl_db(struct adapter *, struct sge_fl *);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int refill_fl(struct adapter *, struct sge_fl *, int);
static void refill_sfl(void *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int alloc_fl_sdesc(struct sge_fl *);
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
static void free_fl_sdesc(struct adapter *, struct sge_fl *);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
static void find_best_refill_source(struct adapter *, struct sge_fl *, int);
static void find_safe_refill_source(struct adapter *, struct sge_fl *);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static void add_fl_to_sfl(struct adapter *, struct sge_fl *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline void get_pkt_gl(struct mbuf *, struct sglist *);
static inline u_int txpkt_len16(u_int, u_int);
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
static inline u_int txpkt_vm_len16(u_int, u_int);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline u_int txpkts0_len16(u_int);
static inline u_int txpkts1_len16(void);
static u_int write_txpkt_wr(struct sge_txq *, struct fw_eth_tx_pkt_wr *,
struct mbuf *, u_int);
cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. Sponsored by: Chelsio Communications
2016-09-11 16:11:51 +00:00
static u_int write_txpkt_vm_wr(struct adapter *, struct sge_txq *,
struct fw_eth_tx_pkt_vm_wr *, struct mbuf *, u_int);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static int try_txpkts(struct mbuf *, struct mbuf *, struct txpkts *, u_int);
static int add_to_txpkts(struct mbuf *, struct txpkts *, u_int);
static u_int write_txpkts_wr(struct sge_txq *, struct fw_eth_tx_pkts_wr *,
struct mbuf *, const struct txpkts *, u_int);
static void write_gl_to_txd(struct sge_txq *, struct mbuf *, caddr_t *, int);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static inline void copy_to_txd(struct sge_eq *, caddr_t, caddr_t *, int);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline void ring_eq_db(struct adapter *, struct sge_eq *, u_int);
static inline uint16_t read_hw_cidx(struct sge_eq *);
static inline u_int reclaimable_tx_desc(struct sge_eq *);
static inline u_int total_available_tx_desc(struct sge_eq *);
static u_int reclaim_tx_descs(struct sge_txq *, u_int);
static void tx_reclaim(void *, int);
static __be64 get_flit(struct sglist_seg *, int, int);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int handle_sge_egr_update(struct sge_iq *, const struct rss_header *,
struct mbuf *);
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
static int handle_fw_msg(struct sge_iq *, const struct rss_header *,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct mbuf *);
Install a handler for firmware work request error messages. If a driver sends an malformed or disallowed work request, the firmware responds with a work request error. Previously the driver treated this is as an unexpected message and panicked. Now it decodes the error message to aid in debugging. Reviewed by: np (older version) MFC after: 1 month Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D6950
2016-07-22 21:52:07 +00:00
static int t4_handle_wrerr_rpl(struct adapter *, const __be64 *);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static void wrq_tx_drain(void *, int);
static void drain_wrq_wr_list(struct adapter *, struct sge_wrq *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
static int sysctl_uint16(SYSCTL_HANDLER_ARGS);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
static int sysctl_bufsizes(SYSCTL_HANDLER_ARGS);
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
static int sysctl_tc(SYSCTL_HANDLER_ARGS);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
cxgbe(4): Keep track of the clusters that have to be freed by the custom free routine (rxb_free) in the driver. Fail MOD_UNLOAD with EBUSY if any such cluster has been handed up to the kernel but hasn't been freed yet. This prevents a panic later when the cluster finally needs to be freed but rxb_free is gone from the kernel. MFC after: 1 week
2014-07-23 22:29:22 +00:00
static counter_u64_t extfree_refs;
static counter_u64_t extfree_rels;
cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications
2016-07-05 01:29:24 +00:00
an_handler_t t4_an_handler;
fw_msg_handler_t t4_fw_msg_handler[NUM_FW6_TYPES];
cpl_handler_t t4_cpl_handler[NUM_CPL_CMDS];
static int
an_not_handled(struct sge_iq *iq, const struct rsp_ctrl *ctrl)
{
#ifdef INVARIANTS
panic("%s: async notification on iq %p (ctrl %p)", __func__, iq, ctrl);
#else
log(LOG_ERR, "%s: async notification on iq %p (ctrl %p)\n",
__func__, iq, ctrl);
#endif
return (EDOOFUS);
}
int
t4_register_an_handler(an_handler_t h)
{
uintptr_t *loc, new;
new = h ? (uintptr_t)h : (uintptr_t)an_not_handled;
loc = (uintptr_t *) &t4_an_handler;
atomic_store_rel_ptr(loc, new);
return (0);
}
static int
fw_msg_not_handled(struct adapter *sc, const __be64 *rpl)
{
const struct cpl_fw6_msg *cpl =
__containerof(rpl, struct cpl_fw6_msg, data[0]);
#ifdef INVARIANTS
panic("%s: fw_msg type %d", __func__, cpl->type);
#else
log(LOG_ERR, "%s: fw_msg type %d\n", __func__, cpl->type);
#endif
return (EDOOFUS);
}
int
t4_register_fw_msg_handler(int type, fw_msg_handler_t h)
{
uintptr_t *loc, new;
if (type >= nitems(t4_fw_msg_handler))
return (EINVAL);
/*
* These are dispatched by the handler for FW{4|6}_CPL_MSG using the CPL
* handler dispatch table. Reject any attempt to install a handler for
* this subtype.
*/
if (type == FW_TYPE_RSSCPL || type == FW6_TYPE_RSSCPL)
return (EINVAL);
new = h ? (uintptr_t)h : (uintptr_t)fw_msg_not_handled;
loc = (uintptr_t *) &t4_fw_msg_handler[type];
atomic_store_rel_ptr(loc, new);
return (0);
}
static int
cpl_not_handled(struct sge_iq *iq, const struct rss_header *rss, struct mbuf *m)
{
#ifdef INVARIANTS
panic("%s: opcode 0x%02x on iq %p with payload %p",
__func__, rss->opcode, iq, m);
#else
log(LOG_ERR, "%s: opcode 0x%02x on iq %p with payload %p\n",
__func__, rss->opcode, iq, m);
m_freem(m);
#endif
return (EDOOFUS);
}
int
t4_register_cpl_handler(int opcode, cpl_handler_t h)
{
uintptr_t *loc, new;
if (opcode >= nitems(t4_cpl_handler))
return (EINVAL);
new = h ? (uintptr_t)h : (uintptr_t)cpl_not_handled;
loc = (uintptr_t *) &t4_cpl_handler[opcode];
atomic_store_rel_ptr(loc, new);
return (0);
}
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
/*
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
* Called on MOD_LOAD. Validates and calculates the SGE tunables.
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
*/
void
t4_sge_modload(void)
{
cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications
2016-07-05 01:29:24 +00:00
int i;
Better way to determine the status page length and rx pad boundary.
2012-06-23 22:12:27 +00:00
Convert some fixed parameters to tunables (with reasonable default values). - cong_drop specifies what to do on congestion: nothing, backpressure, or drop. - fl_pktshift specifies the padding before Ethernet payload. - fl_pad specifies the boundary upto which to pad Ethernet payload. - spg_len controls the length of the status page. MFC after: 2 weeks
2012-08-14 21:47:41 +00:00
if (fl_pktshift < 0 || fl_pktshift > 7) {
printf("Invalid hw.cxgbe.fl_pktshift value (%d),"
" using 2 instead.\n", fl_pktshift);
fl_pktshift = 2;
}
if (spg_len != 64 && spg_len != 128) {
int len;
#if defined(__i386__) || defined(__amd64__)
len = cpu_clflush_line_size > 64 ? 128 : 64;
#else
len = 64;
#endif
if (spg_len != -1) {
printf("Invalid hw.cxgbe.spg_len value (%d),"
" using %d instead.\n", spg_len, len);
}
spg_len = len;
}
if (cong_drop < -1 || cong_drop > 1) {
printf("Invalid hw.cxgbe.cong_drop value (%d),"
" using 0 instead.\n", cong_drop);
cong_drop = 0;
}
cxgbe(4): Keep track of the clusters that have to be freed by the custom free routine (rxb_free) in the driver. Fail MOD_UNLOAD with EBUSY if any such cluster has been handed up to the kernel but hasn't been freed yet. This prevents a panic later when the cluster finally needs to be freed but rxb_free is gone from the kernel. MFC after: 1 week
2014-07-23 22:29:22 +00:00
cxgbe: Add a tunable to configure the SGE time scaler, which is available starting with T6. The values in the timer holdoff registers are multiplied by the scaling factor before use. dev.<nexus>.<n>.holdoff_timers shows the final values of the timers in microseconds. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-15 17:00:50 +00:00
if (tscale != 1 && (tscale < 3 || tscale > 17)) {
printf("Invalid hw.cxgbe.tscale value (%d),"
" using 1 instead.\n", tscale);
tscale = 1;
}
cxgbe(4): Keep track of the clusters that have to be freed by the custom free routine (rxb_free) in the driver. Fail MOD_UNLOAD with EBUSY if any such cluster has been handed up to the kernel but hasn't been freed yet. This prevents a panic later when the cluster finally needs to be freed but rxb_free is gone from the kernel. MFC after: 1 week
2014-07-23 22:29:22 +00:00
extfree_refs = counter_u64_alloc(M_WAITOK);
extfree_rels = counter_u64_alloc(M_WAITOK);
counter_u64_zero(extfree_refs);
counter_u64_zero(extfree_rels);
cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications
2016-07-05 01:29:24 +00:00
t4_an_handler = an_not_handled;
for (i = 0; i < nitems(t4_fw_msg_handler); i++)
t4_fw_msg_handler[i] = fw_msg_not_handled;
for (i = 0; i < nitems(t4_cpl_handler); i++)
t4_cpl_handler[i] = cpl_not_handled;
t4_register_cpl_handler(CPL_FW4_MSG, handle_fw_msg);
t4_register_cpl_handler(CPL_FW6_MSG, handle_fw_msg);
t4_register_cpl_handler(CPL_SGE_EGR_UPDATE, handle_sge_egr_update);
t4_register_cpl_handler(CPL_RX_PKT, t4_eth_rx);
t4_register_fw_msg_handler(FW6_TYPE_CMD_RPL, t4_handle_fw_rpl);
Install a handler for firmware work request error messages. If a driver sends an malformed or disallowed work request, the firmware responds with a work request error. Previously the driver treated this is as an unexpected message and panicked. Now it decodes the error message to aid in debugging. Reviewed by: np (older version) MFC after: 1 month Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D6950
2016-07-22 21:52:07 +00:00
t4_register_fw_msg_handler(FW6_TYPE_WRERR_RPL, t4_handle_wrerr_rpl);
cxgbe(4): Keep track of the clusters that have to be freed by the custom free routine (rxb_free) in the driver. Fail MOD_UNLOAD with EBUSY if any such cluster has been handed up to the kernel but hasn't been freed yet. This prevents a panic later when the cluster finally needs to be freed but rxb_free is gone from the kernel. MFC after: 1 week
2014-07-23 22:29:22 +00:00
}
void
t4_sge_modunload(void)
{
counter_u64_free(extfree_refs);
counter_u64_free(extfree_rels);
}
uint64_t
t4_sge_extfree_refs(void)
{
uint64_t refs, rels;
rels = counter_u64_fetch(extfree_rels);
refs = counter_u64_fetch(extfree_refs);
return (refs - rels);
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
}
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
static inline void
setup_pad_and_pack_boundaries(struct adapter *sc)
{
uint32_t v, m;
cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. Sponsored by: Chelsio Communications
2016-09-11 17:22:54 +00:00
int pad, pack, pad_shift;
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. Sponsored by: Chelsio Communications
2016-09-11 17:22:54 +00:00
pad_shift = chip_id(sc) > CHELSIO_T5 ? X_T6_INGPADBOUNDARY_SHIFT :
X_INGPADBOUNDARY_SHIFT;
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
pad = fl_pad;
cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. Sponsored by: Chelsio Communications
2016-09-11 17:22:54 +00:00
if (fl_pad < (1 << pad_shift) ||
fl_pad > (1 << (pad_shift + M_INGPADBOUNDARY)) ||
!powerof2(fl_pad)) {
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
/*
* If there is any chance that we might use buffer packing and
* the chip is a T4, then pick 64 as the pad/pack boundary. Set
cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. Sponsored by: Chelsio Communications
2016-09-11 17:22:54 +00:00
* it to the minimum allowed in all other cases.
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
*/
cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. Sponsored by: Chelsio Communications
2016-09-11 17:22:54 +00:00
pad = is_t4(sc) && buffer_packing ? 64 : 1 << pad_shift;
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
/*
* For fl_pad = 0 we'll still write a reasonable value to the
* register but all the freelists will opt out of padding.
* We'll complain here only if the user tried to set it to a
* value greater than 0 that was invalid.
*/
if (fl_pad > 0) {
device_printf(sc->dev, "Invalid hw.cxgbe.fl_pad value"
" (%d), using %d instead.\n", fl_pad, pad);
}
}
m = V_INGPADBOUNDARY(M_INGPADBOUNDARY);
cxgbe(4): Update the pad_boundary calculation for T6, which has a different range of boundaries. Sponsored by: Chelsio Communications
2016-09-11 17:22:54 +00:00
v = V_INGPADBOUNDARY(ilog2(pad) - pad_shift);
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
t4_set_reg_field(sc, A_SGE_CONTROL, m, v);
if (is_t4(sc)) {
if (fl_pack != -1 && fl_pack != pad) {
/* Complain but carry on. */
device_printf(sc->dev, "hw.cxgbe.fl_pack (%d) ignored,"
" using %d instead.\n", fl_pack, pad);
}
return;
}
pack = fl_pack;
if (fl_pack < 16 || fl_pack == 32 || fl_pack > 4096 ||
!powerof2(fl_pack)) {
pack = max(sc->params.pci.mps, CACHE_LINE_SIZE);
MPASS(powerof2(pack));
if (pack < 16)
pack = 16;
if (pack == 32)
pack = 64;
if (pack > 4096)
pack = 4096;
if (fl_pack != -1) {
device_printf(sc->dev, "Invalid hw.cxgbe.fl_pack value"
" (%d), using %d instead.\n", fl_pack, pack);
}
}
m = V_INGPACKBOUNDARY(M_INGPACKBOUNDARY);
if (pack == 16)
v = V_INGPACKBOUNDARY(0);
else
v = V_INGPACKBOUNDARY(ilog2(pack) - 5);
MPASS(!is_t4(sc)); /* T4 doesn't have SGE_CONTROL2 */
t4_set_reg_field(sc, A_SGE_CONTROL2, m, v);
}
Auto-reduce the holdoff timers that are greater than the maximum value allowed by the hardware. MFC after: 3 days
2013-04-11 22:46:39 +00:00
/*
* adap->params.vpd.cclk must be set up before this is called.
*/
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
void
t4_tweak_chip_settings(struct adapter *sc)
{
int i;
uint32_t v, m;
int intr_timer[SGE_NTIMERS] = {1, 5, 10, 50, 100, 200};
Auto-reduce the holdoff timers that are greater than the maximum value allowed by the hardware. MFC after: 3 days
2013-04-11 22:46:39 +00:00
int timer_max = M_TIMERVALUE0 * 1000 / sc->params.vpd.cclk;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
int intr_pktcount[SGE_NCOUNTERS] = {1, 8, 16, 32}; /* 63 max */
uint16_t indsz = min(RX_COPY_THRESHOLD - 1, M_INDICATESIZE);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
static int sge_flbuf_sizes[] = {
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
MCLBYTES,
#if MJUMPAGESIZE != MCLBYTES
MJUMPAGESIZE,
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
MJUMPAGESIZE - CL_METADATA_SIZE,
MJUMPAGESIZE - 2 * MSIZE - CL_METADATA_SIZE,
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
#endif
MJUM9BYTES,
MJUM16BYTES,
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
MCLBYTES - MSIZE - CL_METADATA_SIZE,
MJUM9BYTES - CL_METADATA_SIZE,
MJUM16BYTES - CL_METADATA_SIZE,
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
};
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
KASSERT(sc->flags & MASTER_PF,
("%s: trying to change chip settings when not master.", __func__));
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
m = V_PKTSHIFT(M_PKTSHIFT) | F_RXPKTCPLMODE | F_EGRSTATUSPAGESIZE;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
v = V_PKTSHIFT(fl_pktshift) | F_RXPKTCPLMODE |
Better way to determine the status page length and rx pad boundary.
2012-06-23 22:12:27 +00:00
V_EGRSTATUSPAGESIZE(spg_len == 128);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
t4_set_reg_field(sc, A_SGE_CONTROL, m, v);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
setup_pad_and_pack_boundaries(sc);
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
v = V_HOSTPAGESIZEPF0(PAGE_SHIFT - 10) |
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
V_HOSTPAGESIZEPF1(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF2(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF3(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF4(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF5(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF6(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF7(PAGE_SHIFT - 10);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
t4_write_reg(sc, A_SGE_HOST_PAGE_SIZE, v);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
KASSERT(nitems(sge_flbuf_sizes) <= SGE_FLBUF_SIZES,
("%s: hw buffer size table too big", __func__));
for (i = 0; i < min(nitems(sge_flbuf_sizes), SGE_FLBUF_SIZES); i++) {
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
t4_write_reg(sc, A_SGE_FL_BUFFER_SIZE0 + (4 * i),
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
sge_flbuf_sizes[i]);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
v = V_THRESHOLD_0(intr_pktcount[0]) | V_THRESHOLD_1(intr_pktcount[1]) |
V_THRESHOLD_2(intr_pktcount[2]) | V_THRESHOLD_3(intr_pktcount[3]);
t4_write_reg(sc, A_SGE_INGRESS_RX_THRESHOLD, v);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
Auto-reduce the holdoff timers that are greater than the maximum value allowed by the hardware. MFC after: 3 days
2013-04-11 22:46:39 +00:00
KASSERT(intr_timer[0] <= timer_max,
("%s: not a single usable timer (%d, %d)", __func__, intr_timer[0],
timer_max));
for (i = 1; i < nitems(intr_timer); i++) {
KASSERT(intr_timer[i] >= intr_timer[i - 1],
("%s: timers not listed in increasing order (%d)",
__func__, i));
while (intr_timer[i] > timer_max) {
if (i == nitems(intr_timer) - 1) {
intr_timer[i] = timer_max;
break;
}
intr_timer[i] += intr_timer[i - 1];
intr_timer[i] /= 2;
}
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
v = V_TIMERVALUE0(us_to_core_ticks(sc, intr_timer[0])) |
V_TIMERVALUE1(us_to_core_ticks(sc, intr_timer[1]));
t4_write_reg(sc, A_SGE_TIMER_VALUE_0_AND_1, v);
v = V_TIMERVALUE2(us_to_core_ticks(sc, intr_timer[2])) |
V_TIMERVALUE3(us_to_core_ticks(sc, intr_timer[3]));
t4_write_reg(sc, A_SGE_TIMER_VALUE_2_AND_3, v);
v = V_TIMERVALUE4(us_to_core_ticks(sc, intr_timer[4])) |
V_TIMERVALUE5(us_to_core_ticks(sc, intr_timer[5]));
t4_write_reg(sc, A_SGE_TIMER_VALUE_4_AND_5, v);
cxgbe: Add a tunable to configure the SGE time scaler, which is available starting with T6. The values in the timer holdoff registers are multiplied by the scaling factor before use. dev.<nexus>.<n>.holdoff_timers shows the final values of the timers in microseconds. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-15 17:00:50 +00:00
if (chip_id(sc) >= CHELSIO_T6) {
m = V_TSCALE(M_TSCALE);
if (tscale == 1)
v = 0;
else
v = V_TSCALE(tscale - 2);
t4_set_reg_field(sc, A_SGE_ITP_CONTROL, m, v);
cxgbe(4): Add two new debug flags -- one to allow manual firmware install after full initialization, and another to disable the TCB cache (T6+). The latter works as a tunable only. Note that debug_flags are for debugging only and should not be set normally. MFC after: 1 week Sponsored by: Chelsio Communications
2017-08-30 23:41:04 +00:00
if (sc->debug_flags & DF_DISABLE_TCB_CACHE) {
m = V_RDTHRESHOLD(M_RDTHRESHOLD) | F_WRTHRTHRESHEN |
V_WRTHRTHRESH(M_WRTHRTHRESH);
t4_tp_pio_read(sc, &v, 1, A_TP_CMM_CONFIG, 1);
v &= ~m;
v |= V_RDTHRESHOLD(1) | F_WRTHRTHRESHEN |
V_WRTHRTHRESH(16);
t4_tp_pio_write(sc, &v, 1, A_TP_CMM_CONFIG, 1);
}
cxgbe: Add a tunable to configure the SGE time scaler, which is available starting with T6. The values in the timer holdoff registers are multiplied by the scaling factor before use. dev.<nexus>.<n>.holdoff_timers shows the final values of the timers in microseconds. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-15 17:00:50 +00:00
}
cxgbe/cxgbei: Retire all DDP related code from cxgbei and switch to routines available in t4_tom to manage the iSCSI DDP page pod region. This adds the ability to use multiple DDP page sizes to the iSCSI driver, among other improvements. Sponsored by: Chelsio Communications
2016-09-01 20:43:01 +00:00
/* 4K, 16K, 64K, 256K DDP "page sizes" for TDDP */
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
v = V_HPZ0(0) | V_HPZ1(2) | V_HPZ2(4) | V_HPZ3(6);
t4_write_reg(sc, A_ULP_RX_TDDP_PSZ, v);
cxgbe/cxgbei: Retire all DDP related code from cxgbei and switch to routines available in t4_tom to manage the iSCSI DDP page pod region. This adds the ability to use multiple DDP page sizes to the iSCSI driver, among other improvements. Sponsored by: Chelsio Communications
2016-09-01 20:43:01 +00:00
/*
* 4K, 8K, 16K, 64K DDP "page sizes" for iSCSI DDP. These have been
* chosen with MAXPHYS = 128K in mind. The largest DDP buffer that we
* may have to deal with is MAXPHYS + 1 page.
*/
v = V_HPZ0(0) | V_HPZ1(1) | V_HPZ2(2) | V_HPZ3(4);
t4_write_reg(sc, A_ULP_RX_ISCSI_PSZ, v);
/* We use multiple DDP page sizes both in plain-TOE and ISCSI modes. */
m = v = F_TDDPTAGTCB | F_ISCSITAGTCB;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
t4_set_reg_field(sc, A_ULP_RX_CTL, m, v);
m = V_INDICATESIZE(M_INDICATESIZE) | F_REARMDDPOFFSET |
F_RESETDDPOFFSET;
v = V_INDICATESIZE(indsz) | F_REARMDDPOFFSET | F_RESETDDPOFFSET;
t4_set_reg_field(sc, A_TP_PARA_REG5, m, v);
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/*
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
* SGE wants the buffer to be at least 64B and then a multiple of 16. If
Fix a typo.
2016-08-08 21:28:02 +00:00
* padding is in use, the buffer's start and end need to be aligned to the pad
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
* boundary as well. We'll just make sure that the size is a multiple of the
* boundary here, it is up to the buffer allocation code to make sure the start
* of the buffer is aligned as well.
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
*/
static inline int
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
hwsz_ok(struct adapter *sc, int hwsz)
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
{
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
int mask = fl_pad ? sc->params.sge.pad_boundary - 1 : 16 - 1;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
return (hwsz >= 64 && (hwsz & mask) == 0);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
/*
* XXX: driver really should be able to deal with unexpected settings.
*/
int
t4_read_chip_settings(struct adapter *sc)
{
struct sge *s = &sc->sge;
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
struct sge_params *sp = &sc->params.sge;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
int i, j, n, rc = 0;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
uint32_t m, v, r;
uint16_t indsz = min(RX_COPY_THRESHOLD - 1, M_INDICATESIZE);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
static int sw_buf_sizes[] = { /* Sorted by size */
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
MCLBYTES,
#if MJUMPAGESIZE != MCLBYTES
MJUMPAGESIZE,
#endif
MJUM9BYTES,
MJUM16BYTES
};
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
struct sw_zone_info *swz, *safe_swz;
struct hw_buf_info *hwb;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
m = F_RXPKTCPLMODE;
v = F_RXPKTCPLMODE;
Make SGE parameter handling more VF-friendly. Add fields to hold the SGE control register and free list buffer sizes to the sge_params structure. Populate these new fields in t4_init_sge_params() for PF devices and change t4_read_chip_settings() to pull these values out of the params structure instead of reading registers directly. This will permit t4_read_chip_settings() to be reused for VF devices which cannot read SGE registers directly. While here, move the call to t4_init_sge_params() to get_params__post_init(). The VF driver will populate the SGE parameters structure via a different method before calling t4_read_chip_settings(). Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7476
2016-08-15 17:40:05 +00:00
r = sc->params.sge.sge_control;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if ((r & m) != v) {
device_printf(sc->dev, "invalid SGE_CONTROL(0x%x)\n", r);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = EINVAL;
}
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
/*
* If this changes then every single use of PAGE_SHIFT in the driver
* needs to be carefully reviewed for PAGE_SHIFT vs sp->page_shift.
*/
if (sp->page_shift != PAGE_SHIFT) {
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
device_printf(sc->dev, "invalid SGE_HOST_PAGE_SIZE(0x%x)\n", r);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = EINVAL;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/* Filter out unusable hw buffer sizes entirely (mark with -2). */
hwb = &s->hw_buf_info[0];
for (i = 0; i < nitems(s->hw_buf_info); i++, hwb++) {
Make SGE parameter handling more VF-friendly. Add fields to hold the SGE control register and free list buffer sizes to the sge_params structure. Populate these new fields in t4_init_sge_params() for PF devices and change t4_read_chip_settings() to pull these values out of the params structure instead of reading registers directly. This will permit t4_read_chip_settings() to be reused for VF devices which cannot read SGE registers directly. While here, move the call to t4_init_sge_params() to get_params__post_init(). The VF driver will populate the SGE parameters structure via a different method before calling t4_read_chip_settings(). Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7476
2016-08-15 17:40:05 +00:00
r = sc->params.sge.sge_fl_buffer_size[i];
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
hwb->size = r;
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
hwb->zidx = hwsz_ok(sc, r) ? -1 : -2;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
hwb->next = -1;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/*
* Create a sorted list in decreasing order of hw buffer sizes (and so
* increasing order of spare area) for each software zone.
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
*
* If padding is enabled then the start and end of the buffer must align
* to the pad boundary; if packing is enabled then they must align with
* the pack boundary as well. Allocations from the cluster zones are
* aligned to min(size, 4K), so the buffer starts at that alignment and
* ends at hwb->size alignment. If mbuf inlining is allowed the
* starting alignment will be reduced to MSIZE and the driver will
* exercise appropriate caution when deciding on the best buffer layout
* to use.
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
*/
n = 0; /* no usable buffer size to begin with */
swz = &s->sw_zone_info[0];
safe_swz = NULL;
for (i = 0; i < SW_ZONE_SIZES; i++, swz++) {
int8_t head = -1, tail = -1;
swz->size = sw_buf_sizes[i];
swz->zone = m_getzone(swz->size);
swz->type = m_gettype(swz->size);
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
if (swz->size < PAGE_SIZE) {
MPASS(powerof2(swz->size));
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
if (fl_pad && (swz->size % sp->pad_boundary != 0))
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
continue;
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if (swz->size == safest_rx_cluster)
safe_swz = swz;
hwb = &s->hw_buf_info[0];
for (j = 0; j < SGE_FLBUF_SIZES; j++, hwb++) {
if (hwb->zidx != -1 || hwb->size > swz->size)
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
continue;
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
#ifdef INVARIANTS
if (fl_pad)
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
MPASS(hwb->size % sp->pad_boundary == 0);
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
#endif
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
hwb->zidx = i;
if (head == -1)
head = tail = j;
else if (hwb->size < s->hw_buf_info[tail].size) {
s->hw_buf_info[tail].next = j;
tail = j;
} else {
int8_t *cur;
struct hw_buf_info *t;
for (cur = &head; *cur != -1; cur = &t->next) {
t = &s->hw_buf_info[*cur];
if (hwb->size == t->size) {
hwb->zidx = -2;
break;
}
if (hwb->size > t->size) {
hwb->next = *cur;
*cur = j;
break;
}
}
}
}
swz->head_hwidx = head;
swz->tail_hwidx = tail;
if (tail != -1) {
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
n++;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if (swz->size - s->hw_buf_info[tail].size >=
CL_METADATA_SIZE)
sc->flags |= BUF_PACKING_OK;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
if (n == 0) {
device_printf(sc->dev, "no usable SGE FL buffer size.\n");
rc = EINVAL;
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
s->safe_hwidx1 = -1;
s->safe_hwidx2 = -1;
if (safe_swz != NULL) {
s->safe_hwidx1 = safe_swz->head_hwidx;
for (i = safe_swz->head_hwidx; i != -1; i = hwb->next) {
int spare;
hwb = &s->hw_buf_info[i];
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
#ifdef INVARIANTS
if (fl_pad)
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
MPASS(hwb->size % sp->pad_boundary == 0);
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
#endif
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
spare = safe_swz->size - hwb->size;
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
if (spare >= CL_METADATA_SIZE) {
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
s->safe_hwidx2 = i;
break;
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
}
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
if (sc->flags & IS_VF)
return (0);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
v = V_HPZ0(0) | V_HPZ1(2) | V_HPZ2(4) | V_HPZ3(6);
r = t4_read_reg(sc, A_ULP_RX_TDDP_PSZ);
if (r != v) {
device_printf(sc->dev, "invalid ULP_RX_TDDP_PSZ(0x%x)\n", r);
rc = EINVAL;
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
m = v = F_TDDPTAGTCB;
r = t4_read_reg(sc, A_ULP_RX_CTL);
if ((r & m) != v) {
device_printf(sc->dev, "invalid ULP_RX_CTL(0x%x)\n", r);
rc = EINVAL;
}
Allow lazy fill up of freelists. MFC after: 3 days
2011-06-04 23:31:33 +00:00
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
m = V_INDICATESIZE(M_INDICATESIZE) | F_REARMDDPOFFSET |
F_RESETDDPOFFSET;
v = V_INDICATESIZE(indsz) | F_REARMDDPOFFSET | F_RESETDDPOFFSET;
r = t4_read_reg(sc, A_TP_PARA_REG5);
if ((r & m) != v) {
device_printf(sc->dev, "invalid TP_PARA_REG5(0x%x)\n", r);
rc = EINVAL;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Some updates to the common code. - Updated register ranges. - Helper routines for access to TP registers. - Updated routine to read flash parameters. Obtained from: Chelsio Communications MFC after: 2 weeks Sponsored by: Chelsio Communications
2017-07-26 20:20:58 +00:00
t4_init_tp_params(sc, 1);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
t4_read_mtu_tbl(sc, sc->params.mtus, NULL);
t4_load_mtus(sc, sc->params.mtus, sc->params.a_wnd, sc->params.b_wnd);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
int
t4_create_dma_tag(struct adapter *sc)
{
int rc;
rc = bus_dma_tag_create(bus_get_dma_tag(sc->dev), 1, 0,
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, BUS_SPACE_MAXSIZE,
BUS_SPACE_UNRESTRICTED, BUS_SPACE_MAXSIZE, BUS_DMA_ALLOCNOW, NULL,
NULL, &sc->dmat);
if (rc != 0) {
device_printf(sc->dev,
"failed to create main DMA tag: %d\n", rc);
}
return (rc);
}
Display SGE tunables in the sysctl tree. dev.t5nex.0.fl_pktshift: payload DMA offset in rx buffer (bytes) dev.t5nex.0.fl_pad: payload pad boundary (bytes) dev.t5nex.0.spg_len: status page size (bytes) dev.t5nex.0.cong_drop: congestion drop setting Discussed with: scottl
2013-07-31 05:12:51 +00:00
void
t4_sge_sysctls(struct adapter *sc, struct sysctl_ctx_list *ctx,
struct sysctl_oid_list *children)
{
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
struct sge_params *sp = &sc->params.sge;
Display SGE tunables in the sysctl tree. dev.t5nex.0.fl_pktshift: payload DMA offset in rx buffer (bytes) dev.t5nex.0.fl_pad: payload pad boundary (bytes) dev.t5nex.0.spg_len: status page size (bytes) dev.t5nex.0.cong_drop: congestion drop setting Discussed with: scottl
2013-07-31 05:12:51 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "buffer_sizes",
CTLTYPE_STRING | CTLFLAG_RD, &sc->sge, 0, sysctl_bufsizes, "A",
"freelist buffer sizes");
Display SGE tunables in the sysctl tree. dev.t5nex.0.fl_pktshift: payload DMA offset in rx buffer (bytes) dev.t5nex.0.fl_pad: payload pad boundary (bytes) dev.t5nex.0.spg_len: status page size (bytes) dev.t5nex.0.cong_drop: congestion drop setting Discussed with: scottl
2013-07-31 05:12:51 +00:00
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "fl_pktshift", CTLFLAG_RD,
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
NULL, sp->fl_pktshift, "payload DMA offset in rx buffer (bytes)");
Display SGE tunables in the sysctl tree. dev.t5nex.0.fl_pktshift: payload DMA offset in rx buffer (bytes) dev.t5nex.0.fl_pad: payload pad boundary (bytes) dev.t5nex.0.spg_len: status page size (bytes) dev.t5nex.0.cong_drop: congestion drop setting Discussed with: scottl
2013-07-31 05:12:51 +00:00
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "fl_pad", CTLFLAG_RD,
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
NULL, sp->pad_boundary, "payload pad boundary (bytes)");
Display SGE tunables in the sysctl tree. dev.t5nex.0.fl_pktshift: payload DMA offset in rx buffer (bytes) dev.t5nex.0.fl_pad: payload pad boundary (bytes) dev.t5nex.0.spg_len: status page size (bytes) dev.t5nex.0.cong_drop: congestion drop setting Discussed with: scottl
2013-07-31 05:12:51 +00:00
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "spg_len", CTLFLAG_RD,
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
NULL, sp->spg_len, "status page size (bytes)");
Display SGE tunables in the sysctl tree. dev.t5nex.0.fl_pktshift: payload DMA offset in rx buffer (bytes) dev.t5nex.0.fl_pad: payload pad boundary (bytes) dev.t5nex.0.spg_len: status page size (bytes) dev.t5nex.0.cong_drop: congestion drop setting Discussed with: scottl
2013-07-31 05:12:51 +00:00
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "cong_drop", CTLFLAG_RD,
NULL, cong_drop, "congestion drop setting");
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "fl_pack", CTLFLAG_RD,
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
NULL, sp->pack_boundary, "payload pack boundary (bytes)");
Display SGE tunables in the sysctl tree. dev.t5nex.0.fl_pktshift: payload DMA offset in rx buffer (bytes) dev.t5nex.0.fl_pad: payload pad boundary (bytes) dev.t5nex.0.spg_len: status page size (bytes) dev.t5nex.0.cong_drop: congestion drop setting Discussed with: scottl
2013-07-31 05:12:51 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
int
t4_destroy_dma_tag(struct adapter *sc)
{
if (sc->dmat)
bus_dma_tag_destroy(sc->dmat);
return (0);
}
/*
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* Allocate and initialize the firmware event queue and the management queue.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*
* Returns errno on failure. Resources allocated up to that point may still be
* allocated. Caller is responsible for cleanup in case this function fails.
*/
int
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
t4_setup_adapter_queues(struct adapter *sc)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ADAPTER_LOCK_ASSERT_NOTOWNED(sc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sysctl_ctx_init(&sc->ctx);
sc->flags |= ADAP_SYSCTL_CTX;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
/*
* Firmware event queue
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = alloc_fwq(sc);
There is no need to report the same error twice. MFC after: 3 days
2012-10-10 16:54:14 +00:00
if (rc != 0)
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
return (rc);
/*
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* Management queue. This is just a control queue that uses the fwq as
* its associated iq.
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
*/
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
if (!(sc->flags & IS_VF))
rc = alloc_mgmtq(sc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
/*
* Idempotent
*/
int
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
t4_teardown_adapter_queues(struct adapter *sc)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
ADAPTER_LOCK_ASSERT_NOTOWNED(sc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* Do this before freeing the queue */
if (sc->flags & ADAP_SYSCTL_CTX) {
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
sysctl_ctx_free(&sc->ctx);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sc->flags &= ~ADAP_SYSCTL_CTX;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
free_mgmtq(sc);
free_fwq(sc);
return (0);
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/* Maximum payload that can be delivered with a single iq descriptor */
The size of the buffers in an Ethernet freelist has to be higher than the interface's MTU. Initialize such freelists with correct values. This wasn't a problem for common MTUs (1500 and 9000) as the buffers (2048 and 9216 in size) happened to have enough spare room. I ran into it when playing around with unusual MTUs. MFC after: 2 weeks
2012-08-15 01:03:13 +00:00
static inline int
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
mtu_to_max_payload(struct adapter *sc, int mtu, const int toe)
The size of the buffers in an Ethernet freelist has to be higher than the interface's MTU. Initialize such freelists with correct values. This wasn't a problem for common MTUs (1500 and 9000) as the buffers (2048 and 9216 in size) happened to have enough spare room. I ran into it when playing around with unusual MTUs. MFC after: 2 weeks
2012-08-15 01:03:13 +00:00
{
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
int payload;
The size of the buffers in an Ethernet freelist has to be higher than the interface's MTU. Initialize such freelists with correct values. This wasn't a problem for common MTUs (1500 and 9000) as the buffers (2048 and 9216 in size) happened to have enough spare room. I ran into it when playing around with unusual MTUs. MFC after: 2 weeks
2012-08-15 01:03:13 +00:00
- Make note of interface MTU change if the rx queues exist, and not just when the interface is up. - Add a tunable to control the TOE's rx coalesce feature (enabled by default as it always has been). Consider the interface MTU or the coalesce size when deciding which cluster zone to use to fill the offload rx queue's free list. The tunable is: dev.{t4nex,t5nex}.<N>.toe.rx_coalesce MFC after: 1 day
2013-07-04 21:19:01 +00:00
#ifdef TCP_OFFLOAD
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if (toe) {
cxgbe(4): Add support for Connection Offload Policy (aka COP). COP allows fine-grained control on whether to offload a TCP connection using t4_tom, and what settings to apply to a connection selected for offload. t4_tom must still be loaded and IFCAP_TOE must still be enabled for full TCP offload to take place on an interface. The difference is that IFCAP_TOE used to be the only knob and would enable TOE for all new connections on the inteface, but now the driver will also consult the COP, if any, before offloading to the hardware TOE. A policy is a plain text file with any number of rules, one per line. Each rule has a "match" part consisting of a socket-type (L = listen, A = active open, P = passive open, D = don't care) and a pcap-filter(7) expression, and a "settings" part that specifies whether to offload the connection or not and the parameters to use if so. The general format of a rule is: [socket-type] expr => settings Example. See cxgbetool(8) for more information. [L] ip && port http => offload [L] port 443 => !offload [L] port ssh => offload [P] src net 192.168/16 && dst port ssh => offload !nagle !timestamp cong newreno [P] dst port ssh => offload !nagle ecn cong tahoe [P] dst port http => offload [A] dst port 443 => offload tls [A] dst net 192.168/16 => offload !timestamp cong highspeed The driver processes the rules for each new listen, active open, or passive open and stops at the first match. There is an implicit rule at the end of every policy that prohibits offload when no rule in the policy matches: [D] all => !offload This is a reworked and expanded version of a patch submitted by Krishnamraju Eraparaju @ Chelsio. Sponsored by: Chelsio Communications
2018-04-14 19:07:56 +00:00
int rxcs = G_RXCOALESCESIZE(t4_read_reg(sc, A_TP_PARA_REG2));
/* Note that COP can set rx_coalesce on/off per connection. */
payload = max(mtu, rxcs);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
} else {
#endif
/* large enough even when hw VLAN extraction is disabled */
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
payload = sc->params.sge.fl_pktshift + ETHER_HDR_LEN +
ETHER_VLAN_ENCAP_LEN + mtu;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
#ifdef TCP_OFFLOAD
}
#endif
- Make note of interface MTU change if the rx queues exist, and not just when the interface is up. - Add a tunable to control the TOE's rx coalesce feature (enabled by default as it always has been). Consider the interface MTU or the coalesce size when deciding which cluster zone to use to fill the offload rx queue's free list. The tunable is: dev.{t4nex,t5nex}.<N>.toe.rx_coalesce MFC after: 1 day
2013-07-04 21:19:01 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
return (payload);
- Make note of interface MTU change if the rx queues exist, and not just when the interface is up. - Add a tunable to control the TOE's rx coalesce feature (enabled by default as it always has been). Consider the interface MTU or the coalesce size when deciding which cluster zone to use to fill the offload rx queue's free list. The tunable is: dev.{t4nex,t5nex}.<N>.toe.rx_coalesce MFC after: 1 day
2013-07-04 21:19:01 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
t4_setup_vi_queues(struct vi_info *vi)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
int rc = 0, i, intr_idx, iqidx;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct sge_rxq *rxq;
struct sge_txq *txq;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_wrq *ctrlq;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_ofld_rxq *ofld_rxq;
struct sge_wrq *ofld_txq;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
#endif
#ifdef DEV_NETMAP
cxgbe(4): Merge netmap support from the ncxgbe/ncxl interfaces to the vcxgbe/vcxl interfaces and retire the 'n' interfaces. The main cxgbe/cxl interfaces and tunables related to them are not affected by any of this and will continue to operate as usual. The driver used to create an additional 'n' interface for every cxgbe/cxl interface if "device netmap" was in the kernel. The 'n' interface shared the wire with the main interface but was otherwise autonomous (with its own MAC address, etc.). It did not have normal tx/rx but had a specialized netmap-only data path. r291665 added another set of virtual interfaces (the 'v' interfaces) to the driver. These had normal tx/rx but no netmap support. This revision consolidates the features of both the interfaces into the 'v' interface which now has a normal data path, TOE support, and native netmap support. The 'v' interfaces need to be created explicitly with the hw.cxgbe.num_vis tunable. This means "device netmap" will not result in the automatic creation of any virtual interfaces. The following tunables can be used to override the default number of queues allocated for each 'v' interface. nofld* = 0 will disable TOE on the virtual interface and nnm* = 0 to will disable native netmap support. # number of normal NIC queues hw.cxgbe.ntxq_vi hw.cxgbe.nrxq_vi # number of TOE queues hw.cxgbe.nofldtxq_vi hw.cxgbe.nofldrxq_vi # number of netmap queues hw.cxgbe.nnmtxq_vi hw.cxgbe.nnmrxq_vi hw.cxgbe.nnm{t,r}xq{10,1}g tunables have been removed. --- tl;dr version --- The workflow for netmap on cxgbe starting with FreeBSD 11 is: 1) "device netmap" in the kernel config. 2) "hw.cxgbe.num_vis=2" in loader.conf. num_vis > 2 is ok too, you'll end up with multiple autonomous netmap-capable interfaces for every port. 3) "dmesg | grep vcxl | grep netmap" to verify that the interface has netmap queues. 4) Use any of the 'v' interfaces for netmap. pkt-gen -i vcxl<n>... . One major improvement is that the netmap interface has a normal data path as expected. 5) Just ignore the cxl interfaces if you want to use netmap only. No need to bring them up. The vcxl interfaces are completely independent and everything should just work. --------------------- Approved by: re@ (gjb@) Relnotes: Yes Sponsored by: Chelsio Communications
2016-06-23 02:53:00 +00:00
int saved_idx;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
struct sge_nm_rxq *nm_rxq;
struct sge_nm_txq *nm_txq;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
char name[16];
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct port_info *pi = vi->pi;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct adapter *sc = pi->adapter;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct ifnet *ifp = vi->ifp;
struct sysctl_oid *oid = device_get_sysctl_tree(vi->dev);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
int maxp, mtu = ifp->if_mtu;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* Interrupt vector to start from (when using multiple vectors) */
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
intr_idx = vi->first_intr;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
#ifdef DEV_NETMAP
cxgbe(4): Merge netmap support from the ncxgbe/ncxl interfaces to the vcxgbe/vcxl interfaces and retire the 'n' interfaces. The main cxgbe/cxl interfaces and tunables related to them are not affected by any of this and will continue to operate as usual. The driver used to create an additional 'n' interface for every cxgbe/cxl interface if "device netmap" was in the kernel. The 'n' interface shared the wire with the main interface but was otherwise autonomous (with its own MAC address, etc.). It did not have normal tx/rx but had a specialized netmap-only data path. r291665 added another set of virtual interfaces (the 'v' interfaces) to the driver. These had normal tx/rx but no netmap support. This revision consolidates the features of both the interfaces into the 'v' interface which now has a normal data path, TOE support, and native netmap support. The 'v' interfaces need to be created explicitly with the hw.cxgbe.num_vis tunable. This means "device netmap" will not result in the automatic creation of any virtual interfaces. The following tunables can be used to override the default number of queues allocated for each 'v' interface. nofld* = 0 will disable TOE on the virtual interface and nnm* = 0 to will disable native netmap support. # number of normal NIC queues hw.cxgbe.ntxq_vi hw.cxgbe.nrxq_vi # number of TOE queues hw.cxgbe.nofldtxq_vi hw.cxgbe.nofldrxq_vi # number of netmap queues hw.cxgbe.nnmtxq_vi hw.cxgbe.nnmrxq_vi hw.cxgbe.nnm{t,r}xq{10,1}g tunables have been removed. --- tl;dr version --- The workflow for netmap on cxgbe starting with FreeBSD 11 is: 1) "device netmap" in the kernel config. 2) "hw.cxgbe.num_vis=2" in loader.conf. num_vis > 2 is ok too, you'll end up with multiple autonomous netmap-capable interfaces for every port. 3) "dmesg | grep vcxl | grep netmap" to verify that the interface has netmap queues. 4) Use any of the 'v' interfaces for netmap. pkt-gen -i vcxl<n>... . One major improvement is that the netmap interface has a normal data path as expected. 5) Just ignore the cxl interfaces if you want to use netmap only. No need to bring them up. The vcxl interfaces are completely independent and everything should just work. --------------------- Approved by: re@ (gjb@) Relnotes: Yes Sponsored by: Chelsio Communications
2016-06-23 02:53:00 +00:00
saved_idx = intr_idx;
if (ifp->if_capabilities & IFCAP_NETMAP) {
/* netmap is supported with direct interrupts only. */
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
MPASS(!forwarding_intr_to_fwq(sc));
cxgbe(4): Merge netmap support from the ncxgbe/ncxl interfaces to the vcxgbe/vcxl interfaces and retire the 'n' interfaces. The main cxgbe/cxl interfaces and tunables related to them are not affected by any of this and will continue to operate as usual. The driver used to create an additional 'n' interface for every cxgbe/cxl interface if "device netmap" was in the kernel. The 'n' interface shared the wire with the main interface but was otherwise autonomous (with its own MAC address, etc.). It did not have normal tx/rx but had a specialized netmap-only data path. r291665 added another set of virtual interfaces (the 'v' interfaces) to the driver. These had normal tx/rx but no netmap support. This revision consolidates the features of both the interfaces into the 'v' interface which now has a normal data path, TOE support, and native netmap support. The 'v' interfaces need to be created explicitly with the hw.cxgbe.num_vis tunable. This means "device netmap" will not result in the automatic creation of any virtual interfaces. The following tunables can be used to override the default number of queues allocated for each 'v' interface. nofld* = 0 will disable TOE on the virtual interface and nnm* = 0 to will disable native netmap support. # number of normal NIC queues hw.cxgbe.ntxq_vi hw.cxgbe.nrxq_vi # number of TOE queues hw.cxgbe.nofldtxq_vi hw.cxgbe.nofldrxq_vi # number of netmap queues hw.cxgbe.nnmtxq_vi hw.cxgbe.nnmrxq_vi hw.cxgbe.nnm{t,r}xq{10,1}g tunables have been removed. --- tl;dr version --- The workflow for netmap on cxgbe starting with FreeBSD 11 is: 1) "device netmap" in the kernel config. 2) "hw.cxgbe.num_vis=2" in loader.conf. num_vis > 2 is ok too, you'll end up with multiple autonomous netmap-capable interfaces for every port. 3) "dmesg | grep vcxl | grep netmap" to verify that the interface has netmap queues. 4) Use any of the 'v' interfaces for netmap. pkt-gen -i vcxl<n>... . One major improvement is that the netmap interface has a normal data path as expected. 5) Just ignore the cxl interfaces if you want to use netmap only. No need to bring them up. The vcxl interfaces are completely independent and everything should just work. --------------------- Approved by: re@ (gjb@) Relnotes: Yes Sponsored by: Chelsio Communications
2016-06-23 02:53:00 +00:00
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
/*
* We don't have buffers to back the netmap rx queues
* right now so we create the queues in a way that
* doesn't set off any congestion signal in the chip.
*/
cxgbe(4): Merge netmap support from the ncxgbe/ncxl interfaces to the vcxgbe/vcxl interfaces and retire the 'n' interfaces. The main cxgbe/cxl interfaces and tunables related to them are not affected by any of this and will continue to operate as usual. The driver used to create an additional 'n' interface for every cxgbe/cxl interface if "device netmap" was in the kernel. The 'n' interface shared the wire with the main interface but was otherwise autonomous (with its own MAC address, etc.). It did not have normal tx/rx but had a specialized netmap-only data path. r291665 added another set of virtual interfaces (the 'v' interfaces) to the driver. These had normal tx/rx but no netmap support. This revision consolidates the features of both the interfaces into the 'v' interface which now has a normal data path, TOE support, and native netmap support. The 'v' interfaces need to be created explicitly with the hw.cxgbe.num_vis tunable. This means "device netmap" will not result in the automatic creation of any virtual interfaces. The following tunables can be used to override the default number of queues allocated for each 'v' interface. nofld* = 0 will disable TOE on the virtual interface and nnm* = 0 to will disable native netmap support. # number of normal NIC queues hw.cxgbe.ntxq_vi hw.cxgbe.nrxq_vi # number of TOE queues hw.cxgbe.nofldtxq_vi hw.cxgbe.nofldrxq_vi # number of netmap queues hw.cxgbe.nnmtxq_vi hw.cxgbe.nnmrxq_vi hw.cxgbe.nnm{t,r}xq{10,1}g tunables have been removed. --- tl;dr version --- The workflow for netmap on cxgbe starting with FreeBSD 11 is: 1) "device netmap" in the kernel config. 2) "hw.cxgbe.num_vis=2" in loader.conf. num_vis > 2 is ok too, you'll end up with multiple autonomous netmap-capable interfaces for every port. 3) "dmesg | grep vcxl | grep netmap" to verify that the interface has netmap queues. 4) Use any of the 'v' interfaces for netmap. pkt-gen -i vcxl<n>... . One major improvement is that the netmap interface has a normal data path as expected. 5) Just ignore the cxl interfaces if you want to use netmap only. No need to bring them up. The vcxl interfaces are completely independent and everything should just work. --------------------- Approved by: re@ (gjb@) Relnotes: Yes Sponsored by: Chelsio Communications
2016-06-23 02:53:00 +00:00
oid = SYSCTL_ADD_NODE(&vi->ctx, children, OID_AUTO, "nm_rxq",
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
CTLFLAG_RD, NULL, "rx queues");
for_each_nm_rxq(vi, i, nm_rxq) {
rc = alloc_nm_rxq(vi, nm_rxq, intr_idx, i, oid);
if (rc != 0)
goto done;
intr_idx++;
}
cxgbe(4): Merge netmap support from the ncxgbe/ncxl interfaces to the vcxgbe/vcxl interfaces and retire the 'n' interfaces. The main cxgbe/cxl interfaces and tunables related to them are not affected by any of this and will continue to operate as usual. The driver used to create an additional 'n' interface for every cxgbe/cxl interface if "device netmap" was in the kernel. The 'n' interface shared the wire with the main interface but was otherwise autonomous (with its own MAC address, etc.). It did not have normal tx/rx but had a specialized netmap-only data path. r291665 added another set of virtual interfaces (the 'v' interfaces) to the driver. These had normal tx/rx but no netmap support. This revision consolidates the features of both the interfaces into the 'v' interface which now has a normal data path, TOE support, and native netmap support. The 'v' interfaces need to be created explicitly with the hw.cxgbe.num_vis tunable. This means "device netmap" will not result in the automatic creation of any virtual interfaces. The following tunables can be used to override the default number of queues allocated for each 'v' interface. nofld* = 0 will disable TOE on the virtual interface and nnm* = 0 to will disable native netmap support. # number of normal NIC queues hw.cxgbe.ntxq_vi hw.cxgbe.nrxq_vi # number of TOE queues hw.cxgbe.nofldtxq_vi hw.cxgbe.nofldrxq_vi # number of netmap queues hw.cxgbe.nnmtxq_vi hw.cxgbe.nnmrxq_vi hw.cxgbe.nnm{t,r}xq{10,1}g tunables have been removed. --- tl;dr version --- The workflow for netmap on cxgbe starting with FreeBSD 11 is: 1) "device netmap" in the kernel config. 2) "hw.cxgbe.num_vis=2" in loader.conf. num_vis > 2 is ok too, you'll end up with multiple autonomous netmap-capable interfaces for every port. 3) "dmesg | grep vcxl | grep netmap" to verify that the interface has netmap queues. 4) Use any of the 'v' interfaces for netmap. pkt-gen -i vcxl<n>... . One major improvement is that the netmap interface has a normal data path as expected. 5) Just ignore the cxl interfaces if you want to use netmap only. No need to bring them up. The vcxl interfaces are completely independent and everything should just work. --------------------- Approved by: re@ (gjb@) Relnotes: Yes Sponsored by: Chelsio Communications
2016-06-23 02:53:00 +00:00
oid = SYSCTL_ADD_NODE(&vi->ctx, children, OID_AUTO, "nm_txq",
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
CTLFLAG_RD, NULL, "tx queues");
for_each_nm_txq(vi, i, nm_txq) {
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
iqidx = vi->first_nm_rxq + (i % vi->nnmrxq);
rc = alloc_nm_txq(vi, nm_txq, iqidx, i, oid);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
if (rc != 0)
goto done;
}
}
cxgbe(4): Merge netmap support from the ncxgbe/ncxl interfaces to the vcxgbe/vcxl interfaces and retire the 'n' interfaces. The main cxgbe/cxl interfaces and tunables related to them are not affected by any of this and will continue to operate as usual. The driver used to create an additional 'n' interface for every cxgbe/cxl interface if "device netmap" was in the kernel. The 'n' interface shared the wire with the main interface but was otherwise autonomous (with its own MAC address, etc.). It did not have normal tx/rx but had a specialized netmap-only data path. r291665 added another set of virtual interfaces (the 'v' interfaces) to the driver. These had normal tx/rx but no netmap support. This revision consolidates the features of both the interfaces into the 'v' interface which now has a normal data path, TOE support, and native netmap support. The 'v' interfaces need to be created explicitly with the hw.cxgbe.num_vis tunable. This means "device netmap" will not result in the automatic creation of any virtual interfaces. The following tunables can be used to override the default number of queues allocated for each 'v' interface. nofld* = 0 will disable TOE on the virtual interface and nnm* = 0 to will disable native netmap support. # number of normal NIC queues hw.cxgbe.ntxq_vi hw.cxgbe.nrxq_vi # number of TOE queues hw.cxgbe.nofldtxq_vi hw.cxgbe.nofldrxq_vi # number of netmap queues hw.cxgbe.nnmtxq_vi hw.cxgbe.nnmrxq_vi hw.cxgbe.nnm{t,r}xq{10,1}g tunables have been removed. --- tl;dr version --- The workflow for netmap on cxgbe starting with FreeBSD 11 is: 1) "device netmap" in the kernel config. 2) "hw.cxgbe.num_vis=2" in loader.conf. num_vis > 2 is ok too, you'll end up with multiple autonomous netmap-capable interfaces for every port. 3) "dmesg | grep vcxl | grep netmap" to verify that the interface has netmap queues. 4) Use any of the 'v' interfaces for netmap. pkt-gen -i vcxl<n>... . One major improvement is that the netmap interface has a normal data path as expected. 5) Just ignore the cxl interfaces if you want to use netmap only. No need to bring them up. The vcxl interfaces are completely independent and everything should just work. --------------------- Approved by: re@ (gjb@) Relnotes: Yes Sponsored by: Chelsio Communications
2016-06-23 02:53:00 +00:00
/* Normal rx queues and netmap rx queues share the same interrupts. */
intr_idx = saved_idx;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
#endif
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
* Allocate rx queues first because a default iqid is required when
* creating a tx queue.
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
*/
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
maxp = mtu_to_max_payload(sc, mtu, 0);
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
oid = SYSCTL_ADD_NODE(&vi->ctx, children, OID_AUTO, "rxq",
CTLFLAG_RD, NULL, "rx queues");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
for_each_rxq(vi, i, rxq) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
init_iq(&rxq->iq, sc, vi->tmr_idx, vi->pktc_idx, vi->qsize_rxq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
snprintf(name, sizeof(name), "%s rxq%d-fl",
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
device_get_nameunit(vi->dev), i);
init_fl(sc, &rxq->fl, vi->qsize_rxq / 8, maxp, name);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
rc = alloc_rxq(vi, rxq,
forwarding_intr_to_fwq(sc) ? -1 : intr_idx, i, oid);
if (rc != 0)
goto done;
intr_idx++;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4): Merge netmap support from the ncxgbe/ncxl interfaces to the vcxgbe/vcxl interfaces and retire the 'n' interfaces. The main cxgbe/cxl interfaces and tunables related to them are not affected by any of this and will continue to operate as usual. The driver used to create an additional 'n' interface for every cxgbe/cxl interface if "device netmap" was in the kernel. The 'n' interface shared the wire with the main interface but was otherwise autonomous (with its own MAC address, etc.). It did not have normal tx/rx but had a specialized netmap-only data path. r291665 added another set of virtual interfaces (the 'v' interfaces) to the driver. These had normal tx/rx but no netmap support. This revision consolidates the features of both the interfaces into the 'v' interface which now has a normal data path, TOE support, and native netmap support. The 'v' interfaces need to be created explicitly with the hw.cxgbe.num_vis tunable. This means "device netmap" will not result in the automatic creation of any virtual interfaces. The following tunables can be used to override the default number of queues allocated for each 'v' interface. nofld* = 0 will disable TOE on the virtual interface and nnm* = 0 to will disable native netmap support. # number of normal NIC queues hw.cxgbe.ntxq_vi hw.cxgbe.nrxq_vi # number of TOE queues hw.cxgbe.nofldtxq_vi hw.cxgbe.nofldrxq_vi # number of netmap queues hw.cxgbe.nnmtxq_vi hw.cxgbe.nnmrxq_vi hw.cxgbe.nnm{t,r}xq{10,1}g tunables have been removed. --- tl;dr version --- The workflow for netmap on cxgbe starting with FreeBSD 11 is: 1) "device netmap" in the kernel config. 2) "hw.cxgbe.num_vis=2" in loader.conf. num_vis > 2 is ok too, you'll end up with multiple autonomous netmap-capable interfaces for every port. 3) "dmesg | grep vcxl | grep netmap" to verify that the interface has netmap queues. 4) Use any of the 'v' interfaces for netmap. pkt-gen -i vcxl<n>... . One major improvement is that the netmap interface has a normal data path as expected. 5) Just ignore the cxl interfaces if you want to use netmap only. No need to bring them up. The vcxl interfaces are completely independent and everything should just work. --------------------- Approved by: re@ (gjb@) Relnotes: Yes Sponsored by: Chelsio Communications
2016-06-23 02:53:00 +00:00
#ifdef DEV_NETMAP
if (ifp->if_capabilities & IFCAP_NETMAP)
intr_idx = saved_idx + max(vi->nrxq, vi->nnmrxq);
#endif
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
maxp = mtu_to_max_payload(sc, mtu, 1);
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
oid = SYSCTL_ADD_NODE(&vi->ctx, children, OID_AUTO, "ofld_rxq",
CTLFLAG_RD, NULL, "rx queues for offloaded TCP connections");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
for_each_ofld_rxq(vi, i, ofld_rxq) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Provide knobs to set the holdoff parameters of TOE rx queues separately from NIC rx queues instead of using the same parameters for both types of queues. MFC after: 2 weeks Sponsored by: Chelsio Communications
2017-10-05 07:18:16 +00:00
init_iq(&ofld_rxq->iq, sc, vi->ofld_tmr_idx, vi->ofld_pktc_idx,
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
vi->qsize_rxq);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
snprintf(name, sizeof(name), "%s ofld_rxq%d-fl",
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
device_get_nameunit(vi->dev), i);
init_fl(sc, &ofld_rxq->fl, vi->qsize_rxq / 8, maxp, name);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
rc = alloc_ofld_rxq(vi, ofld_rxq,
forwarding_intr_to_fwq(sc) ? -1 : intr_idx, i, oid);
if (rc != 0)
goto done;
intr_idx++;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
#endif
/*
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
* Now the tx queues.
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
*/
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
oid = SYSCTL_ADD_NODE(&vi->ctx, children, OID_AUTO, "txq", CTLFLAG_RD,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
NULL, "tx queues");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
for_each_txq(vi, i, txq) {
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
iqidx = vi->first_rxq + (i % vi->nrxq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
snprintf(name, sizeof(name), "%s txq%d",
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
device_get_nameunit(vi->dev), i);
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
init_eq(sc, &txq->eq, EQ_ETH, vi->qsize_txq, pi->tx_chan,
sc->sge.rxq[iqidx].iq.cntxt_id, name);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
rc = alloc_txq(vi, txq, i, oid);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0)
goto done;
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
oid = SYSCTL_ADD_NODE(&vi->ctx, children, OID_AUTO, "ofld_txq",
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
CTLFLAG_RD, NULL, "tx queues for offloaded TCP connections");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
for_each_ofld_txq(vi, i, ofld_txq) {
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
struct sysctl_oid *oid2;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
iqidx = vi->first_ofld_rxq + (i % vi->nofldrxq);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
snprintf(name, sizeof(name), "%s ofld_txq%d",
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
device_get_nameunit(vi->dev), i);
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
init_eq(sc, &ofld_txq->eq, EQ_OFLD, vi->qsize_txq, pi->tx_chan,
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
sc->sge.ofld_rxq[iqidx].iq.cntxt_id, name);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
snprintf(name, sizeof(name), "%d", i);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
oid2 = SYSCTL_ADD_NODE(&vi->ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
name, CTLFLAG_RD, NULL, "offload tx queue");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
rc = alloc_wrq(sc, vi, ofld_txq, oid2);
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
if (rc != 0)
goto done;
}
#endif
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Finally, the control queue.
*/
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
if (!IS_MAIN_VI(vi) || sc->flags & IS_VF)
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
goto done;
oid = SYSCTL_ADD_NODE(&vi->ctx, children, OID_AUTO, "ctrlq", CTLFLAG_RD,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
NULL, "ctrl queue");
ctrlq = &sc->sge.ctrlq[pi->port_id];
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
snprintf(name, sizeof(name), "%s ctrlq", device_get_nameunit(vi->dev));
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
init_eq(sc, &ctrlq->eq, EQ_CTRL, CTRL_EQ_QSIZE, pi->tx_chan,
sc->sge.rxq[vi->first_rxq].iq.cntxt_id, name);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
rc = alloc_wrq(sc, vi, ctrlq, oid);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
done:
if (rc)
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
t4_teardown_vi_queues(vi);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
/*
* Idempotent
*/
int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
t4_teardown_vi_queues(struct vi_info *vi)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
int i;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct port_info *pi = vi->pi;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct adapter *sc = pi->adapter;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct sge_rxq *rxq;
struct sge_txq *txq;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_ofld_rxq *ofld_rxq;
struct sge_wrq *ofld_txq;
#endif
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
#ifdef DEV_NETMAP
struct sge_nm_rxq *nm_rxq;
struct sge_nm_txq *nm_txq;
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* Do this before freeing the queues */
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
if (vi->flags & VI_SYSCTL_CTX) {
sysctl_ctx_free(&vi->ctx);
vi->flags &= ~VI_SYSCTL_CTX;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
#ifdef DEV_NETMAP
cxgbe(4): Merge netmap support from the ncxgbe/ncxl interfaces to the vcxgbe/vcxl interfaces and retire the 'n' interfaces. The main cxgbe/cxl interfaces and tunables related to them are not affected by any of this and will continue to operate as usual. The driver used to create an additional 'n' interface for every cxgbe/cxl interface if "device netmap" was in the kernel. The 'n' interface shared the wire with the main interface but was otherwise autonomous (with its own MAC address, etc.). It did not have normal tx/rx but had a specialized netmap-only data path. r291665 added another set of virtual interfaces (the 'v' interfaces) to the driver. These had normal tx/rx but no netmap support. This revision consolidates the features of both the interfaces into the 'v' interface which now has a normal data path, TOE support, and native netmap support. The 'v' interfaces need to be created explicitly with the hw.cxgbe.num_vis tunable. This means "device netmap" will not result in the automatic creation of any virtual interfaces. The following tunables can be used to override the default number of queues allocated for each 'v' interface. nofld* = 0 will disable TOE on the virtual interface and nnm* = 0 to will disable native netmap support. # number of normal NIC queues hw.cxgbe.ntxq_vi hw.cxgbe.nrxq_vi # number of TOE queues hw.cxgbe.nofldtxq_vi hw.cxgbe.nofldrxq_vi # number of netmap queues hw.cxgbe.nnmtxq_vi hw.cxgbe.nnmrxq_vi hw.cxgbe.nnm{t,r}xq{10,1}g tunables have been removed. --- tl;dr version --- The workflow for netmap on cxgbe starting with FreeBSD 11 is: 1) "device netmap" in the kernel config. 2) "hw.cxgbe.num_vis=2" in loader.conf. num_vis > 2 is ok too, you'll end up with multiple autonomous netmap-capable interfaces for every port. 3) "dmesg | grep vcxl | grep netmap" to verify that the interface has netmap queues. 4) Use any of the 'v' interfaces for netmap. pkt-gen -i vcxl<n>... . One major improvement is that the netmap interface has a normal data path as expected. 5) Just ignore the cxl interfaces if you want to use netmap only. No need to bring them up. The vcxl interfaces are completely independent and everything should just work. --------------------- Approved by: re@ (gjb@) Relnotes: Yes Sponsored by: Chelsio Communications
2016-06-23 02:53:00 +00:00
if (vi->ifp->if_capabilities & IFCAP_NETMAP) {
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
for_each_nm_txq(vi, i, nm_txq) {
free_nm_txq(vi, nm_txq);
}
for_each_nm_rxq(vi, i, nm_rxq) {
free_nm_rxq(vi, nm_rxq);
}
}
#endif
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Take down all the tx queues first, as they reference the rx queues
* (for egress updates, etc.).
*/
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
if (IS_MAIN_VI(vi) && !(sc->flags & IS_VF))
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
free_wrq(sc, &sc->sge.ctrlq[pi->port_id]);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
for_each_txq(vi, i, txq) {
free_txq(vi, txq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
for_each_ofld_txq(vi, i, ofld_txq) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
free_wrq(sc, ofld_txq);
}
#endif
/*
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
* Then take down the rx queues.
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
*/
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
for_each_rxq(vi, i, rxq) {
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
free_rxq(vi, rxq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
for_each_ofld_rxq(vi, i, ofld_rxq) {
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
free_ofld_rxq(vi, ofld_rxq);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (0);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Deals with errors and the firmware event queue. All data rx queues forward
* their interrupt to the firmware event queue.
*/
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
void
t4_intr_all(void *arg)
{
struct adapter *sc = arg;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_iq *fwq = &sc->sge.fwq;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
t4_intr_err(arg);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (atomic_cmpset_int(&fwq->state, IQS_IDLE, IQS_BUSY)) {
service_iq(fwq, 0);
atomic_cmpset_int(&fwq->state, IQS_BUSY, IQS_IDLE);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
}
/* Deals with error interrupts */
void
t4_intr_err(void *arg)
{
struct adapter *sc = arg;
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
t4_write_reg(sc, MYPF_REG(A_PCIE_PF_CLI), 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
t4_slow_intr_handler(sc);
}
void
t4_intr_evt(void *arg)
Fix a couple of bad races that can occur when a cxgbe interface is taken down. The ingress queue lock was unused and has been removed as part of these changes. - An in-flight egress update from the SGE must be handled before the queue that requested it is destroyed. Wait for the update to arrive. - Interrupt handlers must stop processing rx events for a queue before the queue is destroyed. Events that have not yet been processed should be ignored once the queue disappears. MFC after: 1 week
2011-04-15 03:09:27 +00:00
{
struct sge_iq *iq = arg;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (atomic_cmpset_int(&iq->state, IQS_IDLE, IQS_BUSY)) {
service_iq(iq, 0);
atomic_cmpset_int(&iq->state, IQS_BUSY, IQS_IDLE);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
}
Fix a couple of bad races that can occur when a cxgbe interface is taken down. The ingress queue lock was unused and has been removed as part of these changes. - An in-flight egress update from the SGE must be handled before the queue that requested it is destroyed. Wait for the update to arrive. - Interrupt handlers must stop processing rx events for a queue before the queue is destroyed. Events that have not yet been processed should be ignored once the queue disappears. MFC after: 1 week
2011-04-15 03:09:27 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
void
t4_intr(void *arg)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
struct sge_iq *iq = arg;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (atomic_cmpset_int(&iq->state, IQS_IDLE, IQS_BUSY)) {
service_iq(iq, 0);
atomic_cmpset_int(&iq->state, IQS_BUSY, IQS_IDLE);
}
}
cxgbe(4): Merge netmap support from the ncxgbe/ncxl interfaces to the vcxgbe/vcxl interfaces and retire the 'n' interfaces. The main cxgbe/cxl interfaces and tunables related to them are not affected by any of this and will continue to operate as usual. The driver used to create an additional 'n' interface for every cxgbe/cxl interface if "device netmap" was in the kernel. The 'n' interface shared the wire with the main interface but was otherwise autonomous (with its own MAC address, etc.). It did not have normal tx/rx but had a specialized netmap-only data path. r291665 added another set of virtual interfaces (the 'v' interfaces) to the driver. These had normal tx/rx but no netmap support. This revision consolidates the features of both the interfaces into the 'v' interface which now has a normal data path, TOE support, and native netmap support. The 'v' interfaces need to be created explicitly with the hw.cxgbe.num_vis tunable. This means "device netmap" will not result in the automatic creation of any virtual interfaces. The following tunables can be used to override the default number of queues allocated for each 'v' interface. nofld* = 0 will disable TOE on the virtual interface and nnm* = 0 to will disable native netmap support. # number of normal NIC queues hw.cxgbe.ntxq_vi hw.cxgbe.nrxq_vi # number of TOE queues hw.cxgbe.nofldtxq_vi hw.cxgbe.nofldrxq_vi # number of netmap queues hw.cxgbe.nnmtxq_vi hw.cxgbe.nnmrxq_vi hw.cxgbe.nnm{t,r}xq{10,1}g tunables have been removed. --- tl;dr version --- The workflow for netmap on cxgbe starting with FreeBSD 11 is: 1) "device netmap" in the kernel config. 2) "hw.cxgbe.num_vis=2" in loader.conf. num_vis > 2 is ok too, you'll end up with multiple autonomous netmap-capable interfaces for every port. 3) "dmesg | grep vcxl | grep netmap" to verify that the interface has netmap queues. 4) Use any of the 'v' interfaces for netmap. pkt-gen -i vcxl<n>... . One major improvement is that the netmap interface has a normal data path as expected. 5) Just ignore the cxl interfaces if you want to use netmap only. No need to bring them up. The vcxl interfaces are completely independent and everything should just work. --------------------- Approved by: re@ (gjb@) Relnotes: Yes Sponsored by: Chelsio Communications
2016-06-23 02:53:00 +00:00
void
t4_vi_intr(void *arg)
{
struct irq *irq = arg;
#ifdef DEV_NETMAP
if (atomic_cmpset_int(&irq->nm_state, NM_ON, NM_BUSY)) {
t4_nm_intr(irq->nm_rxq);
atomic_cmpset_int(&irq->nm_state, NM_BUSY, NM_ON);
}
#endif
if (irq->rxq != NULL)
t4_intr(irq->rxq);
}
cxgbe: Add tunables to control the number of LRO entries and the number of rx mbufs that should be presorted before LRO. There is no change in default behavior. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-17 09:00:20 +00:00
static inline int
sort_before_lro(struct lro_ctrl *lro)
{
return (lro->lro_mbuf_max != 0);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Deals with anything and everything on the given ingress queue.
*/
static int
service_iq(struct sge_iq *iq, int budget)
{
struct sge_iq *q;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
struct sge_rxq *rxq = iq_to_rxq(iq); /* Use iff iq is part of rxq */
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
struct sge_fl *fl; /* Use iff IQ_HAS_FL */
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct adapter *sc = iq->adapter;
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
struct iq_desc *d = &iq->desc[iq->cidx];
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
int ndescs = 0, limit;
int rsp_type, refill;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
uint32_t lq;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
uint16_t fl_hw_cidx;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct mbuf *m0;
STAILQ_HEAD(, sge_iq) iql = STAILQ_HEAD_INITIALIZER(iql);
Merge r254386 from user/np/cxl_tuning. Add an INET|INET6 check missing in said revision. r254386: Flush inactive LRO entries periodically.
2013-08-29 06:26:22 +00:00
#if defined(INET) || defined(INET6)
const struct timeval lro_timeout = {0, sc->lro_timeout};
cxgbe: Add tunables to control the number of LRO entries and the number of rx mbufs that should be presorted before LRO. There is no change in default behavior. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-17 09:00:20 +00:00
struct lro_ctrl *lro = &rxq->lro;
Merge r254386 from user/np/cxl_tuning. Add an INET|INET6 check missing in said revision. r254386: Flush inactive LRO entries periodically.
2013-08-29 06:26:22 +00:00
#endif
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(iq->state == IQS_BUSY, ("%s: iq %p not BUSY", __func__, iq));
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
limit = budget ? budget : iq->qsize / 16;
if (iq->flags & IQ_HAS_FL) {
fl = &rxq->fl;
fl_hw_cidx = fl->hw_cidx; /* stable snapshot */
} else {
fl = NULL;
fl_hw_cidx = 0; /* to silence gcc warning */
}
cxgbe: Add tunables to control the number of LRO entries and the number of rx mbufs that should be presorted before LRO. There is no change in default behavior. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-17 09:00:20 +00:00
#if defined(INET) || defined(INET6)
if (iq->flags & IQ_ADJ_CREDIT) {
MPASS(sort_before_lro(lro));
iq->flags &= ~IQ_ADJ_CREDIT;
if ((d->rsp.u.type_gen & F_RSPD_GEN) != iq->gen) {
tcp_lro_flush_all(lro);
t4_write_reg(sc, sc->sge_gts_reg, V_CIDXINC(1) |
V_INGRESSQID((u32)iq->cntxt_id) |
V_SEINTARM(iq->intr_params));
return (0);
}
ndescs = 1;
}
#else
MPASS((iq->flags & IQ_ADJ_CREDIT) == 0);
#endif
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* We always come back and check the descriptor ring for new indirect
* interrupts and other responses after running a single handler.
*/
for (;;) {
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
while ((d->rsp.u.type_gen & F_RSPD_GEN) == iq->gen) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rmb();
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
refill = 0;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
m0 = NULL;
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
rsp_type = G_RSPD_TYPE(d->rsp.u.type_gen);
lq = be32toh(d->rsp.pldbuflen_qid);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
switch (rsp_type) {
case X_RSPD_TYPE_FLBUF:
KASSERT(iq->flags & IQ_HAS_FL,
("%s: data for an iq (%p) with no freelist",
__func__, iq));
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
m0 = get_fl_payload(sc, fl, lq);
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
if (__predict_false(m0 == NULL))
goto process_iql;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
refill = IDXDIFF(fl->hw_cidx, fl_hw_cidx, fl->sidx) > 2;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#ifdef T4_PKT_TIMESTAMP
/*
* 60 bit timestamp for the payload is
* *(uint64_t *)m0->m_pktdat. Note that it is
* in the leading free-space in the mbuf. The
* kernel can clobber it during a pullup,
* m_copymdata, etc. You need to make sure that
* the mbuf reaches you unmolested if you care
* about the timestamp.
*/
*(uint64_t *)m0->m_pktdat =
be64toh(ctrl->u.last_flit) &
0xfffffffffffffff;
#endif
/* fall through */
case X_RSPD_TYPE_CPL:
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
KASSERT(d->rss.opcode < NUM_CPL_CMDS,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
("%s: bad opcode %02x.", __func__,
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
d->rss.opcode));
cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications
2016-07-05 01:29:24 +00:00
t4_cpl_handler[d->rss.opcode](iq, &d->rss, m0);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
break;
case X_RSPD_TYPE_INTR:
/*
* Interrupts should be forwarded only to queues
* that are not forwarding their interrupts.
* This means service_iq can recurse but only 1
* level deep.
*/
KASSERT(budget == 0,
("%s: budget %u, rsp_type %u", __func__,
budget, rsp_type));
Add hooks in base cxgbe(4) for the iWARP upper-layer driver. Update a couple of assertions in the TOE driver as well.
2013-08-28 20:45:45 +00:00
/*
* There are 1K interrupt-capable queues (qids 0
* through 1023). A response type indicating a
* forwarded interrupt with a qid >= 1K is an
* iWARP async notification.
*/
if (lq >= 1024) {
cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications
2016-07-05 01:29:24 +00:00
t4_an_handler(iq, &d->rsp);
Add hooks in base cxgbe(4) for the iWARP upper-layer driver. Update a couple of assertions in the TOE driver as well.
2013-08-28 20:45:45 +00:00
break;
}
Track the base absolute ID of ingress and egress queues. Use this to map an absolute queue ID to a logical queue ID in interrupt handlers. For the regular cxgbe/cxl drivers this should be a no-op as the base absolute ID should be zero. VF devices have a non-zero base absolute ID and require this change. While here, export the absolute ID of egress queues via a sysctl. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7446
2016-08-09 17:49:42 +00:00
q = sc->sge.iqmap[lq - sc->sge.iq_start -
sc->sge.iq_base];
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (atomic_cmpset_int(&q->state, IQS_IDLE,
IQS_BUSY)) {
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
if (service_iq(q, q->qsize / 16) == 0) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
atomic_cmpset_int(&q->state,
IQS_BUSY, IQS_IDLE);
} else {
STAILQ_INSERT_TAIL(&iql, q,
link);
}
}
break;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
default:
Add hooks in base cxgbe(4) for the iWARP upper-layer driver. Update a couple of assertions in the TOE driver as well.
2013-08-28 20:45:45 +00:00
KASSERT(0,
("%s: illegal response type %d on iq %p",
__func__, rsp_type, iq));
log(LOG_ERR,
"%s: illegal response type %d on iq %p",
device_get_nameunit(sc->dev), rsp_type, iq);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
break;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
d++;
if (__predict_false(++iq->cidx == iq->sidx)) {
iq->cidx = 0;
iq->gen ^= F_RSPD_GEN;
d = &iq->desc[0];
}
if (__predict_false(++ndescs == limit)) {
Store the offset of the KDOORBELL and GTS registers in the softc. VF devices use a different register layout than PF devices. Storing the offset in a value in the softc allows code to be shared between the PF and VF drivers. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7389
2016-08-01 22:39:51 +00:00
t4_write_reg(sc, sc->sge_gts_reg,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
V_CIDXINC(ndescs) |
V_INGRESSQID(iq->cntxt_id) |
V_SEINTARM(V_QINTR_TIMER_IDX(X_TIMERREG_UPDATE_CIDX)));
ndescs = 0;
Merge r254386 from user/np/cxl_tuning. Add an INET|INET6 check missing in said revision. r254386: Flush inactive LRO entries periodically.
2013-08-29 06:26:22 +00:00
#if defined(INET) || defined(INET6)
if (iq->flags & IQ_LRO_ENABLED &&
cxgbe: Add tunables to control the number of LRO entries and the number of rx mbufs that should be presorted before LRO. There is no change in default behavior. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-17 09:00:20 +00:00
!sort_before_lro(lro) &&
Merge r254386 from user/np/cxl_tuning. Add an INET|INET6 check missing in said revision. r254386: Flush inactive LRO entries periodically.
2013-08-29 06:26:22 +00:00
sc->lro_timeout != 0) {
cxgbe: Add tunables to control the number of LRO entries and the number of rx mbufs that should be presorted before LRO. There is no change in default behavior. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-17 09:00:20 +00:00
tcp_lro_flush_inactive(lro,
Merge r254386 from user/np/cxl_tuning. Add an INET|INET6 check missing in said revision. r254386: Flush inactive LRO entries periodically.
2013-08-29 06:26:22 +00:00
&lro_timeout);
}
#endif
cxgbe(4): Properly account for the freelist buffers used when returning early from service_iq due to a budget restriction. This fixes a potential rx hang when using INTx. MFC after: 3 days
2014-06-05 00:38:32 +00:00
if (budget) {
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
if (iq->flags & IQ_HAS_FL) {
cxgbe(4): Properly account for the freelist buffers used when returning early from service_iq due to a budget restriction. This fixes a potential rx hang when using INTx. MFC after: 3 days
2014-06-05 00:38:32 +00:00
FL_LOCK(fl);
refill_fl(sc, fl, 32);
FL_UNLOCK(fl);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (EINPROGRESS);
cxgbe(4): Properly account for the freelist buffers used when returning early from service_iq due to a budget restriction. This fixes a potential rx hang when using INTx. MFC after: 3 days
2014-06-05 00:38:32 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
if (refill) {
FL_LOCK(fl);
refill_fl(sc, fl, 32);
FL_UNLOCK(fl);
fl_hw_cidx = fl->hw_cidx;
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
process_iql:
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (STAILQ_EMPTY(&iql))
break;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Process the head only, and send it to the back of the list if
* it's still not done.
*/
q = STAILQ_FIRST(&iql);
STAILQ_REMOVE_HEAD(&iql, link);
if (service_iq(q, q->qsize / 8) == 0)
atomic_cmpset_int(&q->state, IQS_BUSY, IQS_IDLE);
else
STAILQ_INSERT_TAIL(&iql, q, link);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
#if defined(INET) || defined(INET6)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (iq->flags & IQ_LRO_ENABLED) {
cxgbe: Add tunables to control the number of LRO entries and the number of rx mbufs that should be presorted before LRO. There is no change in default behavior. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-17 09:00:20 +00:00
if (ndescs > 0 && lro->lro_mbuf_count > 8) {
MPASS(sort_before_lro(lro));
/* hold back one credit and don't flush LRO state */
iq->flags |= IQ_ADJ_CREDIT;
ndescs--;
} else {
tcp_lro_flush_all(lro);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
#endif
Store the offset of the KDOORBELL and GTS registers in the softc. VF devices use a different register layout than PF devices. Storing the offset in a value in the softc allows code to be shared between the PF and VF drivers. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7389
2016-08-01 22:39:51 +00:00
t4_write_reg(sc, sc->sge_gts_reg, V_CIDXINC(ndescs) |
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
V_INGRESSQID((u32)iq->cntxt_id) | V_SEINTARM(iq->intr_params));
if (iq->flags & IQ_HAS_FL) {
int starved;
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
FL_LOCK(fl);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
starved = refill_fl(sc, fl, 64);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
FL_UNLOCK(fl);
if (__predict_false(starved != 0))
add_fl_to_sfl(sc, fl);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
static inline int
cl_has_metadata(struct sge_fl *fl, struct cluster_layout *cll)
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
{
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
int rc = fl->flags & FL_BUF_PACKING || cll->region1 > 0;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if (rc)
MPASS(cll->region3 >= CL_METADATA_SIZE);
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
return (rc);
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
static inline struct cluster_metadata *
cl_metadata(struct adapter *sc, struct sge_fl *fl, struct cluster_layout *cll,
caddr_t cl)
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
{
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if (cl_has_metadata(fl, cll)) {
struct sw_zone_info *swz = &sc->sge.sw_zone_info[cll->zidx];
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
return ((struct cluster_metadata *)(cl + swz->size) - 1);
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
return (NULL);
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
}
All mbuf external free functions never fail, so let them be void. Sponsored by: Nginx, Inc.
2014-07-11 13:58:48 +00:00
static void
Shorten list of arguments to mbuf external storage freeing function. All of these arguments are stored in m_ext, so there is no reason to pass them in the argument list. Not all functions need the second argument, some don't even need the first one. The second argument lives in next cache line, so not dereferencing it is a performance gain. This was discovered in sendfile(2), which will be covered by next commits. The second goal of this commit is to bring even more flexibility to m_ext mbufs, allowing to create more fields in m_ext, opaque to the generic mbuf code, and potentially set and dereferenced by subsystems. Reviewed by: gallatin, kbowling Differential Revision: https://reviews.freebsd.org/D12615
2017-10-09 20:35:31 +00:00
rxb_free(struct mbuf *m)
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
{
Shorten list of arguments to mbuf external storage freeing function. All of these arguments are stored in m_ext, so there is no reason to pass them in the argument list. Not all functions need the second argument, some don't even need the first one. The second argument lives in next cache line, so not dereferencing it is a performance gain. This was discovered in sendfile(2), which will be covered by next commits. The second goal of this commit is to bring even more flexibility to m_ext mbufs, allowing to create more fields in m_ext, opaque to the generic mbuf code, and potentially set and dereferenced by subsystems. Reviewed by: gallatin, kbowling Differential Revision: https://reviews.freebsd.org/D12615
2017-10-09 20:35:31 +00:00
uma_zone_t zone = m->m_ext.ext_arg1;
void *cl = m->m_ext.ext_arg2;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
uma_zfree(zone, cl);
cxgbe(4): Keep track of the clusters that have to be freed by the custom free routine (rxb_free) in the driver. Fail MOD_UNLOAD with EBUSY if any such cluster has been handed up to the kernel but hasn't been freed yet. This prevents a panic later when the cluster finally needs to be freed but rxb_free is gone from the kernel. MFC after: 1 week
2014-07-23 22:29:22 +00:00
counter_u64_add(extfree_rels, 1);
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/*
* The mbuf returned by this function could be allocated from zone_mbuf or
* constructed in spare room in the cluster.
*
* The mbuf carries the payload in one of these ways
* a) frame inside the mbuf (mbuf from zone_mbuf)
* b) m_cljset (for clusters without metadata) zone_mbuf
* c) m_extaddref (cluster with metadata) inline mbuf
* d) m_extaddref (cluster with metadata) zone_mbuf
*/
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
static struct mbuf *
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
get_scatter_segment(struct adapter *sc, struct sge_fl *fl, int fr_offset,
int remaining)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
struct mbuf *m;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct fl_sdesc *sd = &fl->sdesc[fl->cidx];
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
struct cluster_layout *cll = &sd->cll;
struct sw_zone_info *swz = &sc->sge.sw_zone_info[cll->zidx];
struct hw_buf_info *hwb = &sc->sge.hw_buf_info[cll->hwidx];
struct cluster_metadata *clm = cl_metadata(sc, fl, cll, sd->cl);
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
int len, blen;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
caddr_t payload;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
blen = hwb->size - fl->rx_offset; /* max possible in this buf */
len = min(remaining, blen);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
payload = sd->cl + cll->region1 + fl->rx_offset;
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
if (fl->flags & FL_BUF_PACKING) {
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
const u_int l = fr_offset + len;
const u_int pad = roundup2(l, fl->buf_boundary) - l;
if (fl->rx_offset + len + pad < hwb->size)
blen = len + pad;
MPASS(fl->rx_offset + blen <= hwb->size);
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
} else {
MPASS(fl->rx_offset == 0); /* not packing */
}
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if (sc->sc_do_rxcopy && len < RX_COPY_THRESHOLD) {
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/*
* Copy payload into a freshly allocated mbuf.
*/
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
m = fr_offset == 0 ?
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
m_gethdr(M_NOWAIT, MT_DATA) : m_get(M_NOWAIT, MT_DATA);
if (m == NULL)
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
return (NULL);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
fl->mbuf_allocated++;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
#ifdef T4_PKT_TIMESTAMP
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/* Leave room for a timestamp */
m->m_data += 8;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
#endif
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/* copy data to mbuf */
bcopy(payload, mtod(m, caddr_t), len);
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
Simplify r267600, there's no need to distinguish between allocated and inlined mbufs. MFC after: 1 week
2014-07-22 02:02:39 +00:00
} else if (sd->nmbuf * MSIZE < cll->region1) {
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/*
* There's spare room in the cluster for an mbuf. Create one
cxgbe(4): Fix bug in the fast rx buffer recycle path. In some cases rx buffers were getting recycled when they should have been left alone. MFC after: 3 days
2014-06-18 00:16:35 +00:00
* and associate it with the payload that's in the cluster.
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
*/
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
MPASS(clm != NULL);
Simplify r267600, there's no need to distinguish between allocated and inlined mbufs. MFC after: 1 week
2014-07-22 02:02:39 +00:00
m = (struct mbuf *)(sd->cl + sd->nmbuf * MSIZE);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/* No bzero required */
Garbage collect unused arguments of m_init().
2016-02-10 18:54:18 +00:00
if (m_init(m, M_NOWAIT, MT_DATA,
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
fr_offset == 0 ? M_PKTHDR | M_NOFREE : M_NOFREE))
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
return (NULL);
fl->mbuf_inlined++;
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
m_extaddref(m, payload, blen, &clm->refcount, rxb_free,
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
swz->zone, sd->cl);
cxgbe(4): Keep track of the clusters that have to be freed by the custom free routine (rxb_free) in the driver. Fail MOD_UNLOAD with EBUSY if any such cluster has been handed up to the kernel but hasn't been freed yet. This prevents a panic later when the cluster finally needs to be freed but rxb_free is gone from the kernel. MFC after: 1 week
2014-07-23 22:29:22 +00:00
if (sd->nmbuf++ == 0)
counter_u64_add(extfree_refs, 1);
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
} else {
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/*
* Grab an mbuf from zone_mbuf and associate it with the
* payload in the cluster.
*/
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
m = fr_offset == 0 ?
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
m_gethdr(M_NOWAIT, MT_DATA) : m_get(M_NOWAIT, MT_DATA);
if (m == NULL)
return (NULL);
fl->mbuf_allocated++;
cxgbe(4): Fix bug in the fast rx buffer recycle path. In some cases rx buffers were getting recycled when they should have been left alone. MFC after: 3 days
2014-06-18 00:16:35 +00:00
if (clm != NULL) {
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
m_extaddref(m, payload, blen, &clm->refcount,
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
rxb_free, swz->zone, sd->cl);
cxgbe(4): Keep track of the clusters that have to be freed by the custom free routine (rxb_free) in the driver. Fail MOD_UNLOAD with EBUSY if any such cluster has been handed up to the kernel but hasn't been freed yet. This prevents a panic later when the cluster finally needs to be freed but rxb_free is gone from the kernel. MFC after: 1 week
2014-07-23 22:29:22 +00:00
if (sd->nmbuf++ == 0)
counter_u64_add(extfree_refs, 1);
cxgbe(4): Fix bug in the fast rx buffer recycle path. In some cases rx buffers were getting recycled when they should have been left alone. MFC after: 3 days
2014-06-18 00:16:35 +00:00
} else {
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
m_cljset(m, sd->cl, swz->type);
sd->cl = NULL; /* consumed, not a recycle candidate */
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
}
}
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
if (fr_offset == 0)
m->m_pkthdr.len = remaining;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
m->m_len = len;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if (fl->flags & FL_BUF_PACKING) {
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
fl->rx_offset += blen;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
MPASS(fl->rx_offset <= hwb->size);
if (fl->rx_offset < hwb->size)
return (m); /* without advancing the cidx */
}
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
if (__predict_false(++fl->cidx % 8 == 0)) {
uint16_t cidx = fl->cidx / 8;
if (__predict_false(cidx == fl->sidx))
fl->cidx = cidx = 0;
fl->hw_cidx = cidx;
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
fl->rx_offset = 0;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
return (m);
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
}
static struct mbuf *
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
get_fl_payload(struct adapter *sc, struct sge_fl *fl, uint32_t len_newbuf)
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
{
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
struct mbuf *m0, *m, **pnext;
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
u_int remaining;
const u_int total = G_RSPD_LEN(len_newbuf);
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
if (__predict_false(fl->flags & FL_BUF_RESUME)) {
cxgbe(4): Fix a NULL dereference when the very first call to get_scatter_segment() in get_fl_payload() fails. While here, fix the code to adjust fl_bufs_used when a failure occurs for any other scatter segment. MFC after: 3 days
2014-05-30 22:59:45 +00:00
M_ASSERTPKTHDR(fl->m0);
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
MPASS(fl->m0->m_pkthdr.len == total);
MPASS(fl->remaining < total);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
m0 = fl->m0;
pnext = fl->pnext;
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
remaining = fl->remaining;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
fl->flags &= ~FL_BUF_RESUME;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
goto get_segment;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if (fl->rx_offset > 0 && len_newbuf & F_RSPD_NEWBUF) {
fl->rx_offset = 0;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
if (__predict_false(++fl->cidx % 8 == 0)) {
uint16_t cidx = fl->cidx / 8;
if (__predict_false(cidx == fl->sidx))
fl->cidx = cidx = 0;
fl->hw_cidx = cidx;
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/*
* Payload starts at rx_offset in the current hw buffer. Its length is
* 'len' and it may span multiple hw buffers.
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
m0 = get_scatter_segment(sc, fl, 0, total);
cxgbe(4): Fix a NULL dereference when the very first call to get_scatter_segment() in get_fl_payload() fails. While here, fix the code to adjust fl_bufs_used when a failure occurs for any other scatter segment. MFC after: 3 days
2014-05-30 22:59:45 +00:00
if (m0 == NULL)
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
return (NULL);
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
remaining = total - m0->m_len;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
pnext = &m0->m_next;
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
while (remaining > 0) {
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
get_segment:
MPASS(fl->rx_offset == 0);
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
m = get_scatter_segment(sc, fl, total - remaining, remaining);
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
if (__predict_false(m == NULL)) {
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
fl->m0 = m0;
fl->pnext = pnext;
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
fl->remaining = remaining;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
fl->flags |= FL_BUF_RESUME;
return (NULL);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
*pnext = m;
pnext = &m->m_next;
cxgbe(4): allow the driver to use rx buffers that do not end on a pack boundary. MFC after: 2 weeks
2014-12-06 01:47:38 +00:00
remaining -= m->m_len;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
*pnext = NULL;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
cxgbe: get_fl_payload returns a header mbuf when successful. MFC after: 3 days
2015-06-23 05:55:13 +00:00
M_ASSERTPKTHDR(m0);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (m0);
}
static int
t4_eth_rx(struct sge_iq *iq, const struct rss_header *rss, struct mbuf *m0)
{
Do not allocate extra vectors when adapter is not TOE capable (or toecaps have been disallowed by the user). + one very minor unrelated cleanup in t4_sge.c
2012-06-22 22:59:42 +00:00
struct sge_rxq *rxq = iq_to_rxq(iq);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct ifnet *ifp = rxq->ifp;
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
struct adapter *sc = iq->adapter;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
const struct cpl_rx_pkt *cpl = (const void *)(rss + 1);
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
#if defined(INET) || defined(INET6)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct lro_ctrl *lro = &rxq->lro;
#endif
cxgbe(4): provide the exact RSS hash type instead of a catch-all value to the upper layers.
2015-03-26 18:45:51 +00:00
static const int sw_hashtype[4][2] = {
{M_HASHTYPE_NONE, M_HASHTYPE_NONE},
{M_HASHTYPE_RSS_IPV4, M_HASHTYPE_RSS_IPV6},
{M_HASHTYPE_RSS_TCP_IPV4, M_HASHTYPE_RSS_TCP_IPV6},
{M_HASHTYPE_RSS_UDP_IPV4, M_HASHTYPE_RSS_UDP_IPV6},
};
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(m0 != NULL, ("%s: no payload with opcode %02x", __func__,
rss->opcode));
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
m0->m_pkthdr.len -= sc->params.sge.fl_pktshift;
m0->m_len -= sc->params.sge.fl_pktshift;
m0->m_data += sc->params.sge.fl_pktshift;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
m0->m_pkthdr.rcvif = ifp;
cxgbe(4): provide the exact RSS hash type instead of a catch-all value to the upper layers.
2015-03-26 18:45:51 +00:00
M_HASHTYPE_SET(m0, sw_hashtype[rss->hash_type][rss->ipv6]);
cxgbe(4): save a copy of the RSS map for each port for the driver's use.
2013-12-08 17:47:37 +00:00
m0->m_pkthdr.flowid = be32toh(rss->hash_val);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Deal with compressed error vectors. MFC after: 3 days Sponsored by: Chelsio Communications
2016-12-15 02:05:29 +00:00
if (cpl->csum_calc && !(cpl->err_vec & sc->params.tp.err_vec_mask)) {
cxgbe(4): support for IPv6 hardware checksumming (rx and tx).
2012-06-29 16:50:52 +00:00
if (ifp->if_capenable & IFCAP_RXCSUM &&
cpl->l2info & htobe32(F_RXF_IP)) {
- Assign (don't OR) the CSUM_XXX bits to csum_flags in the rx checksum code. - Fix TSO/TSO4 mixup. - Add IFCAP_LINKSTATE to the available/enabled capabilities.
2012-06-30 02:05:09 +00:00
m0->m_pkthdr.csum_flags = (CSUM_IP_CHECKED |
cxgbe(4): support for IPv6 hardware checksumming (rx and tx).
2012-06-29 16:50:52 +00:00
CSUM_IP_VALID | CSUM_DATA_VALID | CSUM_PSEUDO_HDR);
rxq->rxcsum++;
} else if (ifp->if_capenable & IFCAP_RXCSUM_IPV6 &&
cpl->l2info & htobe32(F_RXF_IP6)) {
- Assign (don't OR) the CSUM_XXX bits to csum_flags in the rx checksum code. - Fix TSO/TSO4 mixup. - Add IFCAP_LINKSTATE to the available/enabled capabilities.
2012-06-30 02:05:09 +00:00
m0->m_pkthdr.csum_flags = (CSUM_DATA_VALID_IPV6 |
cxgbe(4): support for IPv6 hardware checksumming (rx and tx).
2012-06-29 16:50:52 +00:00
CSUM_PSEUDO_HDR);
rxq->rxcsum++;
}
if (__predict_false(cpl->ip_frag))
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
m0->m_pkthdr.csum_data = be16toh(cpl->csum);
else
m0->m_pkthdr.csum_data = 0xffff;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (cpl->vlan_ex) {
m0->m_pkthdr.ether_vtag = be16toh(cpl->vlan);
m0->m_flags |= M_VLANTAG;
rxq->vlan_extraction++;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
#if defined(INET) || defined(INET6)
cxgbe: Add tunables to control the number of LRO entries and the number of rx mbufs that should be presorted before LRO. There is no change in default behavior. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-17 09:00:20 +00:00
if (iq->flags & IQ_LRO_ENABLED) {
if (sort_before_lro(lro)) {
tcp_lro_queue_mbuf(lro, m0);
return (0); /* queued for sort, then LRO */
}
if (tcp_lro_rx(lro, m0, 0) == 0)
return (0); /* queued for LRO */
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
ifp->if_input(ifp, m0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
/*
* Must drain the wrq or make sure that someone else will.
*/
static void
wrq_tx_drain(void *arg, int n)
{
struct sge_wrq *wrq = arg;
struct sge_eq *eq = &wrq->eq;
EQ_LOCK(eq);
if (TAILQ_EMPTY(&wrq->incomplete_wrs) && !STAILQ_EMPTY(&wrq->wr_list))
drain_wrq_wr_list(wrq->adapter, wrq);
EQ_UNLOCK(eq);
}
static void
drain_wrq_wr_list(struct adapter *sc, struct sge_wrq *wrq)
{
struct sge_eq *eq = &wrq->eq;
u_int available, dbdiff; /* # of hardware descriptors */
u_int n;
struct wrqe *wr;
struct fw_eth_tx_pkt_wr *dst; /* any fw WR struct will do */
EQ_LOCK_ASSERT_OWNED(eq);
MPASS(TAILQ_EMPTY(&wrq->incomplete_wrs));
wr = STAILQ_FIRST(&wrq->wr_list);
MPASS(wr != NULL); /* Must be called with something useful to do */
cxgbe(4): Always dispatch all work requests that have been written to the descriptor ring before leaving drain_wrq_wr_list.
2016-04-12 22:11:29 +00:00
MPASS(eq->pidx == eq->dbidx);
dbdiff = 0;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
do {
eq->cidx = read_hw_cidx(eq);
if (eq->pidx == eq->cidx)
available = eq->sidx - 1;
else
available = IDXDIFF(eq->cidx, eq->pidx, eq->sidx) - 1;
MPASS(wr->wrq == wrq);
n = howmany(wr->wr_len, EQ_ESIZE);
if (available < n)
cxgbe(4): Always dispatch all work requests that have been written to the descriptor ring before leaving drain_wrq_wr_list.
2016-04-12 22:11:29 +00:00
break;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
dst = (void *)&eq->desc[eq->pidx];
if (__predict_true(eq->sidx - eq->pidx > n)) {
/* Won't wrap, won't end exactly at the status page. */
bcopy(&wr->wr[0], dst, wr->wr_len);
eq->pidx += n;
} else {
int first_portion = (eq->sidx - eq->pidx) * EQ_ESIZE;
bcopy(&wr->wr[0], dst, first_portion);
if (wr->wr_len > first_portion) {
bcopy(&wr->wr[first_portion], &eq->desc[0],
wr->wr_len - first_portion);
}
eq->pidx = n - (eq->sidx - eq->pidx);
}
cxgbe(4): Fixes to wrq stats. - Increment tx_wrs_copied in the correct place. - Add tx_wrs_sspace to the sysctl MIB. Sponsored by: Chelsio Communications
2016-09-19 17:16:51 +00:00
wrq->tx_wrs_copied++;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (available < eq->sidx / 4 &&
atomic_cmpset_int(&eq->equiq, 0, 1)) {
dst->equiq_to_len16 |= htobe32(F_FW_WR_EQUIQ |
F_FW_WR_EQUEQ);
eq->equeqidx = eq->pidx;
} else if (IDXDIFF(eq->pidx, eq->equeqidx, eq->sidx) >= 32) {
dst->equiq_to_len16 |= htobe32(F_FW_WR_EQUEQ);
eq->equeqidx = eq->pidx;
}
dbdiff += n;
if (dbdiff >= 16) {
ring_eq_db(sc, eq, dbdiff);
dbdiff = 0;
}
STAILQ_REMOVE_HEAD(&wrq->wr_list, link);
free_wrqe(wr);
MPASS(wrq->nwr_pending > 0);
wrq->nwr_pending--;
MPASS(wrq->ndesc_needed >= n);
wrq->ndesc_needed -= n;
} while ((wr = STAILQ_FIRST(&wrq->wr_list)) != NULL);
if (dbdiff)
ring_eq_db(sc, eq, dbdiff);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Doesn't fail. Holds on to work requests it can't send right away.
*/
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
void
t4_wrq_tx_locked(struct adapter *sc, struct sge_wrq *wrq, struct wrqe *wr)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
#ifdef INVARIANTS
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_eq *eq = &wrq->eq;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
#endif
EQ_LOCK_ASSERT_OWNED(eq);
MPASS(wr != NULL);
MPASS(wr->wr_len > 0 && wr->wr_len <= SGE_MAX_WR_LEN);
MPASS((wr->wr_len & 0x7) == 0);
STAILQ_INSERT_TAIL(&wrq->wr_list, wr, link);
wrq->nwr_pending++;
wrq->ndesc_needed += howmany(wr->wr_len, EQ_ESIZE);
if (!TAILQ_EMPTY(&wrq->incomplete_wrs))
return; /* commit_wrq_wr will drain wr_list as well. */
drain_wrq_wr_list(sc, wrq);
/* Doorbell must have caught up to the pidx. */
MPASS(eq->pidx == eq->dbidx);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
void
t4_update_fl_bufsize(struct ifnet *ifp)
{
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct vi_info *vi = ifp->if_softc;
struct adapter *sc = vi->pi->adapter;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
struct sge_rxq *rxq;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
struct sge_ofld_rxq *ofld_rxq;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#endif
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
struct sge_fl *fl;
int i, maxp, mtu = ifp->if_mtu;
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
maxp = mtu_to_max_payload(sc, mtu, 0);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
for_each_rxq(vi, i, rxq) {
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
fl = &rxq->fl;
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
FL_LOCK(fl);
find_best_refill_source(sc, fl, maxp);
FL_UNLOCK(fl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
#ifdef TCP_OFFLOAD
maxp = mtu_to_max_payload(sc, mtu, 1);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
for_each_ofld_rxq(vi, i, ofld_rxq) {
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
fl = &ofld_rxq->fl;
T4 packet timestamps. Reference code that shows how to get a packet's timestamp out of cxgbe(4). Disabled by default because we don't have a standard way today to pass this information up the stack. The timestamp is 60 bits wide and each increment represents 1 tick of the T4's core clock. As an example, the timestamp granularity is ~4.4ns for this card: # sysctl dev.t4nex.0.core_clock dev.t4nex.0.core_clock: 228125 MFC after: 1 week
2011-05-05 02:38:08 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
FL_LOCK(fl);
find_best_refill_source(sc, fl, maxp);
FL_UNLOCK(fl);
}
#endif
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline int
mbuf_nsegs(struct mbuf *m)
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
M_ASSERTPKTHDR(m);
KASSERT(m->m_pkthdr.l5hlen > 0,
("%s: mbuf %p missing information on # of segments.", __func__, m));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (m->m_pkthdr.l5hlen);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline void
set_mbuf_nsegs(struct mbuf *m, uint8_t nsegs)
{
M_ASSERTPKTHDR(m);
m->m_pkthdr.l5hlen = nsegs;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline int
mbuf_len16(struct mbuf *m)
{
int n;
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
M_ASSERTPKTHDR(m);
n = m->m_pkthdr.PH_loc.eight[0];
MPASS(n > 0 && n <= SGE_MAX_WR_LEN / 16);
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (n);
}
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline void
set_mbuf_len16(struct mbuf *m, uint8_t len16)
{
M_ASSERTPKTHDR(m);
m->m_pkthdr.PH_loc.eight[0] = len16;
}
static inline int
needs_tso(struct mbuf *m)
{
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
M_ASSERTPKTHDR(m);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (m->m_pkthdr.csum_flags & CSUM_TSO) {
KASSERT(m->m_pkthdr.tso_segsz > 0,
("%s: TSO requested in mbuf %p but MSS not provided",
__func__, m));
return (1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (0);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline int
needs_l3_csum(struct mbuf *m)
{
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
M_ASSERTPKTHDR(m);
if (m->m_pkthdr.csum_flags & (CSUM_IP | CSUM_TSO))
return (1);
return (0);
}
static inline int
needs_l4_csum(struct mbuf *m)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
M_ASSERTPKTHDR(m);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (m->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP | CSUM_UDP_IPV6 |
CSUM_TCP_IPV6 | CSUM_TSO))
return (1);
return (0);
}
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline int
needs_vlan_insertion(struct mbuf *m)
{
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
M_ASSERTPKTHDR(m);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (m->m_flags & M_VLANTAG) {
KASSERT(m->m_pkthdr.ether_vtag != 0,
("%s: HWVLAN requested in mbuf %p but tag not provided",
__func__, m));
return (1);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (0);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static void *
m_advance(struct mbuf **pm, int *poffset, int len)
{
struct mbuf *m = *pm;
int offset = *poffset;
uintptr_t p = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS(len > 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Don't break out of the m_advance() loop if len drops to zero. If a packet contains the Ethernet header (14 bytes) in the first mbuf and the payload (IP + UDP + data) in the second mbuf, then the attempt to fetch the l3hdr will return a NULL pointer. The first loop iteration will drop len to zero and exit the loop without setting 'p'. However, the desired data is at the start of the second mbuf, so the correct behavior is to loop around and let the conditional set 'p' to m_data of the next mbuf (and leave offset as 0). Reviewed by: np Sponsored by: Chelsio Communications
2016-09-07 18:08:43 +00:00
for (;;) {
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (offset + len < m->m_len) {
offset += len;
p = mtod(m, uintptr_t) + offset;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
break;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
}
len -= m->m_len - offset;
m = m->m_next;
offset = 0;
MPASS(m != NULL);
}
*poffset = offset;
*pm = m;
return ((void *)p);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
/*
* Can deal with empty mbufs in the chain that have m_len = 0, but the chain
* must have at least one mbuf that's not empty.
*/
static inline int
count_mbuf_nsegs(struct mbuf *m)
{
cxgbe(4): Fix bug in the calculation of the number of physically contiguous regions in an mbuf chain. If the payload of an mbuf ends at a page boundary count_mbuf_nsegs would incorrectly consider the next mbuf's payload physically contiguous based solely on a KVA comparison. MFC after: 1 week Sponsored by: Chelsio Communications
2016-10-24 19:09:56 +00:00
vm_paddr_t lastb, next;
vm_offset_t va;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
int len, nsegs;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS(m != NULL);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
nsegs = 0;
cxgbe(4): Fix bug in the calculation of the number of physically contiguous regions in an mbuf chain. If the payload of an mbuf ends at a page boundary count_mbuf_nsegs would incorrectly consider the next mbuf's payload physically contiguous based solely on a KVA comparison. MFC after: 1 week Sponsored by: Chelsio Communications
2016-10-24 19:09:56 +00:00
lastb = 0;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
for (; m; m = m->m_next) {
len = m->m_len;
if (__predict_false(len == 0))
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
continue;
cxgbe(4): Fix bug in the calculation of the number of physically contiguous regions in an mbuf chain. If the payload of an mbuf ends at a page boundary count_mbuf_nsegs would incorrectly consider the next mbuf's payload physically contiguous based solely on a KVA comparison. MFC after: 1 week Sponsored by: Chelsio Communications
2016-10-24 19:09:56 +00:00
va = mtod(m, vm_offset_t);
next = pmap_kextract(va);
nsegs += sglist_count(m->m_data, len);
if (lastb + 1 == next)
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
nsegs--;
cxgbe(4): Fix bug in the calculation of the number of physically contiguous regions in an mbuf chain. If the payload of an mbuf ends at a page boundary count_mbuf_nsegs would incorrectly consider the next mbuf's payload physically contiguous based solely on a KVA comparison. MFC after: 1 week Sponsored by: Chelsio Communications
2016-10-24 19:09:56 +00:00
lastb = pmap_kextract(va + len - 1);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS(nsegs > 0);
return (nsegs);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
/*
* Analyze the mbuf to determine its tx needs. The mbuf passed in may change:
* a) caller can assume it's been freed if this function returns with an error.
* b) it may get defragged up if the gather list is too long for the hardware.
*/
int
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
parse_pkt(struct adapter *sc, struct mbuf **mp)
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
{
struct mbuf *m0 = *mp, *m;
int rc, nsegs, defragged = 0, offset;
struct ether_header *eh;
void *l3hdr;
#if defined(INET) || defined(INET6)
struct tcphdr *tcp;
#endif
uint16_t eh_type;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
M_ASSERTPKTHDR(m0);
if (__predict_false(m0->m_pkthdr.len < ETHER_HDR_LEN)) {
rc = EINVAL;
fail:
m_freem(m0);
*mp = NULL;
return (rc);
}
restart:
/*
* First count the number of gather list segments in the payload.
* Defrag the mbuf if nsegs exceeds the hardware limit.
*/
M_ASSERTPKTHDR(m0);
MPASS(m0->m_pkthdr.len > 0);
nsegs = count_mbuf_nsegs(m0);
if (nsegs > (needs_tso(m0) ? TX_SGL_SEGS_TSO : TX_SGL_SEGS)) {
if (defragged++ > 0 || (m = m_defrag(m0, M_NOWAIT)) == NULL) {
rc = EFBIG;
goto fail;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
*mp = m0 = m; /* update caller's copy after defrag */
goto restart;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (__predict_false(nsegs > 2 && m0->m_pkthdr.len <= MHLEN)) {
m0 = m_pullup(m0, m0->m_pkthdr.len);
if (m0 == NULL) {
/* Should have left well enough alone. */
rc = EFBIG;
goto fail;
}
*mp = m0; /* update caller's copy after pullup */
goto restart;
}
set_mbuf_nsegs(m0, nsegs);
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
if (sc->flags & IS_VF)
set_mbuf_len16(m0, txpkt_vm_len16(nsegs, needs_tso(m0)));
else
set_mbuf_len16(m0, txpkt_len16(nsegs, needs_tso(m0)));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
if (!needs_tso(m0) &&
!(sc->flags & IS_VF && (needs_l3_csum(m0) || needs_l4_csum(m0))))
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
m = m0;
eh = mtod(m, struct ether_header *);
eh_type = ntohs(eh->ether_type);
if (eh_type == ETHERTYPE_VLAN) {
struct ether_vlan_header *evh = (void *)eh;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
eh_type = ntohs(evh->evl_proto);
m0->m_pkthdr.l2hlen = sizeof(*evh);
} else
m0->m_pkthdr.l2hlen = sizeof(*eh);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
offset = 0;
l3hdr = m_advance(&m, &offset, m0->m_pkthdr.l2hlen);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
switch (eh_type) {
#ifdef INET6
case ETHERTYPE_IPV6:
{
struct ip6_hdr *ip6 = l3hdr;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
MPASS(!needs_tso(m0) || ip6->ip6_nxt == IPPROTO_TCP);
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
m0->m_pkthdr.l3hlen = sizeof(*ip6);
break;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
#endif
#ifdef INET
case ETHERTYPE_IP:
{
struct ip *ip = l3hdr;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
m0->m_pkthdr.l3hlen = ip->ip_hl * 4;
break;
}
#endif
default:
panic("%s: ethertype 0x%04x unknown. if_cxgbe must be compiled"
" with the same INET/INET6 options as the kernel.",
__func__, eh_type);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
#if defined(INET) || defined(INET6)
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
if (needs_tso(m0)) {
tcp = m_advance(&m, &offset, m0->m_pkthdr.l3hlen);
m0->m_pkthdr.l4hlen = tcp->th_off * 4;
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
#endif
MPASS(m0 == *mp);
return (0);
}
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
void *
start_wrq_wr(struct sge_wrq *wrq, int len16, struct wrq_cookie *cookie)
{
struct sge_eq *eq = &wrq->eq;
struct adapter *sc = wrq->adapter;
int ndesc, available;
struct wrqe *wr;
void *w;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS(len16 > 0);
ndesc = howmany(len16, EQ_ESIZE / 16);
MPASS(ndesc > 0 && ndesc <= SGE_MAX_WR_NDESC);
EQ_LOCK(eq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. MFC after: 1 week Sponsored by: Chelsio Communications
2017-09-09 05:12:14 +00:00
if (TAILQ_EMPTY(&wrq->incomplete_wrs) && !STAILQ_EMPTY(&wrq->wr_list))
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
drain_wrq_wr_list(sc, wrq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (!STAILQ_EMPTY(&wrq->wr_list)) {
slowpath:
EQ_UNLOCK(eq);
wr = alloc_wrqe(len16 * 16, wrq);
if (__predict_false(wr == NULL))
return (NULL);
cookie->pidx = -1;
cookie->ndesc = ndesc;
return (&wr->wr);
}
eq->cidx = read_hw_cidx(eq);
if (eq->pidx == eq->cidx)
available = eq->sidx - 1;
else
available = IDXDIFF(eq->cidx, eq->pidx, eq->sidx) - 1;
if (available < ndesc)
goto slowpath;
cookie->pidx = eq->pidx;
cookie->ndesc = ndesc;
TAILQ_INSERT_TAIL(&wrq->incomplete_wrs, cookie, link);
w = &eq->desc[eq->pidx];
IDXINCR(eq->pidx, ndesc, eq->sidx);
cxgbe(4): The wraparound logic in start_wrq_wr() should not get involved in work requests that end at the end of the descriptor ring, even though the pidx wraps around to 0. MFC after: 3 days
2017-01-09 22:18:08 +00:00
if (__predict_false(cookie->pidx + ndesc > eq->sidx)) {
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
w = &wrq->ss[0];
wrq->ss_pidx = cookie->pidx;
wrq->ss_len = len16 * 16;
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
EQ_UNLOCK(eq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (w);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
void
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
commit_wrq_wr(struct sge_wrq *wrq, void *w, struct wrq_cookie *cookie)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
struct sge_eq *eq = &wrq->eq;
struct adapter *sc = wrq->adapter;
int ndesc, pidx;
struct wrq_cookie *prev, *next;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (cookie->pidx == -1) {
struct wrqe *wr = __containerof(w, struct wrqe, wr);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
t4_wrq_tx(sc, wr);
return;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
- Make note of interface MTU change if the rx queues exist, and not just when the interface is up. - Add a tunable to control the TOE's rx coalesce feature (enabled by default as it always has been). Consider the interface MTU or the coalesce size when deciding which cluster zone to use to fill the offload rx queue's free list. The tunable is: dev.{t4nex,t5nex}.<N>.toe.rx_coalesce MFC after: 1 day
2013-07-04 21:19:01 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (__predict_false(w == &wrq->ss[0])) {
int n = (eq->sidx - wrq->ss_pidx) * EQ_ESIZE;
MPASS(wrq->ss_len > n); /* WR had better wrap around. */
bcopy(&wrq->ss[0], &eq->desc[wrq->ss_pidx], n);
bcopy(&wrq->ss[n], &eq->desc[0], wrq->ss_len - n);
wrq->tx_wrs_ss++;
} else
wrq->tx_wrs_direct++;
EQ_LOCK(eq);
cxgbe(4): Fix a couple of problems in the sge_wrq data path. - start_wrq_wr must not drain the wr_list if there are incomplete_wrs pending. This can happen when a t4_wrq_tx runs between two start_wrq_wr. - commit_wrq_wr must examine the cookie's pidx and ndesc with the queue's lock held. Otherwise there is a bad race when incomplete WRs are being completed and commit_wrq_wr for the WR that is ahead in the queue updates the next incomplete WR's cookie's pidx/ndesc but the commit_wrq_wr for the second one is using stale values that it read without the lock. MFC after: 1 week Sponsored by: Chelsio Communications
2017-09-09 05:12:14 +00:00
ndesc = cookie->ndesc; /* Can be more than SGE_MAX_WR_NDESC here. */
pidx = cookie->pidx;
MPASS(pidx >= 0 && pidx < eq->sidx);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
prev = TAILQ_PREV(cookie, wrq_incomplete_wrs, link);
next = TAILQ_NEXT(cookie, link);
if (prev == NULL) {
MPASS(pidx == eq->dbidx);
if (next == NULL || ndesc >= 16)
ring_eq_db(wrq->adapter, eq, ndesc);
else {
MPASS(IDXDIFF(next->pidx, pidx, eq->sidx) == ndesc);
next->pidx = pidx;
next->ndesc += ndesc;
}
} else {
MPASS(IDXDIFF(pidx, prev->pidx, eq->sidx) == prev->ndesc);
prev->ndesc += ndesc;
}
TAILQ_REMOVE(&wrq->incomplete_wrs, cookie, link);
if (TAILQ_EMPTY(&wrq->incomplete_wrs) && !STAILQ_EMPTY(&wrq->wr_list))
drain_wrq_wr_list(sc, wrq);
#ifdef INVARIANTS
if (TAILQ_EMPTY(&wrq->incomplete_wrs)) {
/* Doorbell must have caught up to the pidx. */
MPASS(wrq->eq.pidx == wrq->eq.dbidx);
- Make note of interface MTU change if the rx queues exist, and not just when the interface is up. - Add a tunable to control the TOE's rx coalesce feature (enabled by default as it always has been). Consider the interface MTU or the coalesce size when deciding which cluster zone to use to fill the offload rx queue's free list. The tunable is: dev.{t4nex,t5nex}.<N>.toe.rx_coalesce MFC after: 1 day
2013-07-04 21:19:01 +00:00
}
#endif
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
EQ_UNLOCK(eq);
}
static u_int
can_resume_eth_tx(struct mp_ring *r)
{
struct sge_eq *eq = r->cookie;
return (total_available_tx_desc(eq) > eq->sidx / 8);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline int
cannot_use_txpkts(struct mbuf *m)
{
/* maybe put a GL limit too, to avoid silliness? */
return (needs_tso(m));
}
cxgbe(4): Do not assume that if_qflush is always followed by inteface-down. MFC after: 3 days Sponsored by: Chelsio Communications
2017-05-09 18:33:41 +00:00
static inline int
discard_tx(struct sge_eq *eq)
{
return ((eq->flags & (EQ_ENABLED | EQ_QFLUSH)) != EQ_ENABLED);
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
/*
* r->items[cidx] to r->items[pidx], with a wraparound at r->size, are ready to
* be consumed. Return the actual number consumed. 0 indicates a stall.
*/
static u_int
eth_tx(struct mp_ring *r, u_int cidx, u_int pidx)
{
struct sge_txq *txq = r->cookie;
struct sge_eq *eq = &txq->eq;
struct ifnet *ifp = txq->ifp;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct vi_info *vi = ifp->if_softc;
struct port_info *pi = vi->pi;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
struct adapter *sc = pi->adapter;
u_int total, remaining; /* # of packets */
u_int available, dbdiff; /* # of hardware descriptors */
u_int n, next_cidx;
struct mbuf *m0, *tail;
struct txpkts txp;
struct fw_eth_tx_pkts_wr *wr; /* any fw WR struct will do */
remaining = IDXDIFF(pidx, cidx, r->size);
MPASS(remaining > 0); /* Must not be called without work to do. */
total = 0;
TXQ_LOCK(txq);
cxgbe(4): Do not assume that if_qflush is always followed by inteface-down. MFC after: 3 days Sponsored by: Chelsio Communications
2017-05-09 18:33:41 +00:00
if (__predict_false(discard_tx(eq))) {
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
while (cidx != pidx) {
m0 = r->items[cidx];
m_freem(m0);
if (++cidx == r->size)
cidx = 0;
}
reclaim_tx_descs(txq, 2048);
total = remaining;
goto done;
}
/* How many hardware descriptors do we have readily available. */
if (eq->pidx == eq->cidx)
available = eq->sidx - 1;
else
available = IDXDIFF(eq->cidx, eq->pidx, eq->sidx) - 1;
dbdiff = IDXDIFF(eq->pidx, eq->dbidx, eq->sidx);
while (remaining > 0) {
m0 = r->items[cidx];
M_ASSERTPKTHDR(m0);
MPASS(m0->m_nextpkt == NULL);
if (available < SGE_MAX_WR_NDESC) {
available += reclaim_tx_descs(txq, 64);
if (available < howmany(mbuf_len16(m0), EQ_ESIZE / 16))
break; /* out of descriptors */
}
next_cidx = cidx + 1;
if (__predict_false(next_cidx == r->size))
next_cidx = 0;
wr = (void *)&eq->desc[eq->pidx];
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
if (sc->flags & IS_VF) {
total++;
remaining--;
ETHER_BPF_MTAP(ifp, m0);
cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. Sponsored by: Chelsio Communications
2016-09-11 16:11:51 +00:00
n = write_txpkt_vm_wr(sc, txq, (void *)wr, m0,
available);
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
} else if (remaining > 1 &&
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
try_txpkts(m0, r->items[next_cidx], &txp, available) == 0) {
/* pkts at cidx, next_cidx should both be in txp. */
MPASS(txp.npkt == 2);
tail = r->items[next_cidx];
MPASS(tail->m_nextpkt == NULL);
ETHER_BPF_MTAP(ifp, m0);
ETHER_BPF_MTAP(ifp, tail);
m0->m_nextpkt = tail;
if (__predict_false(++next_cidx == r->size))
next_cidx = 0;
while (next_cidx != pidx) {
if (add_to_txpkts(r->items[next_cidx], &txp,
available) != 0)
break;
tail->m_nextpkt = r->items[next_cidx];
tail = tail->m_nextpkt;
ETHER_BPF_MTAP(ifp, tail);
if (__predict_false(++next_cidx == r->size))
next_cidx = 0;
}
n = write_txpkts_wr(txq, wr, m0, &txp, available);
total += txp.npkt;
remaining -= txp.npkt;
} else {
total++;
remaining--;
ETHER_BPF_MTAP(ifp, m0);
cxgbe(4): Be consistent and call ETHER_BPF_MTAP before writing anything to the descriptor ring no matter what path the frame takes within the driver's tx.
2016-03-22 18:56:23 +00:00
n = write_txpkt_wr(txq, (void *)wr, m0, available);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
}
MPASS(n >= 1 && n <= available && n <= SGE_MAX_WR_NDESC);
available -= n;
dbdiff += n;
IDXINCR(eq->pidx, n, eq->sidx);
if (total_available_tx_desc(eq) < eq->sidx / 4 &&
atomic_cmpset_int(&eq->equiq, 0, 1)) {
wr->equiq_to_len16 |= htobe32(F_FW_WR_EQUIQ |
F_FW_WR_EQUEQ);
eq->equeqidx = eq->pidx;
} else if (IDXDIFF(eq->pidx, eq->equeqidx, eq->sidx) >= 32) {
wr->equiq_to_len16 |= htobe32(F_FW_WR_EQUEQ);
eq->equeqidx = eq->pidx;
}
if (dbdiff >= 16 && remaining >= 4) {
ring_eq_db(sc, eq, dbdiff);
available += reclaim_tx_descs(txq, 4 * dbdiff);
dbdiff = 0;
}
cidx = next_cidx;
}
if (dbdiff != 0) {
ring_eq_db(sc, eq, dbdiff);
reclaim_tx_descs(txq, 32);
}
done:
TXQ_UNLOCK(txq);
Consider the total number of descriptors available (and not just those that are ready to be reclaimed) when deciding whether to resume tx after a stall. MFC after: 3 days
2014-06-20 20:28:46 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (total);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static inline void
init_iq(struct sge_iq *iq, struct adapter *sc, int tmr_idx, int pktc_idx,
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
int qsize)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
KASSERT(tmr_idx >= 0 && tmr_idx < SGE_NTIMERS,
("%s: bad tmr_idx %d", __func__, tmr_idx));
KASSERT(pktc_idx < SGE_NCOUNTERS, /* -ve is ok, means don't use */
("%s: bad pktc_idx %d", __func__, pktc_idx));
iq->flags = 0;
iq->adapter = sc;
Change the default to not use packet counters to generate rx interrupts. Rely solely on the timer based mechanism. Update man page to reflect this change. MFC after: 1 week
2012-04-30 09:46:05 +00:00
iq->intr_params = V_QINTR_TIMER_IDX(tmr_idx);
iq->intr_pktc_idx = SGE_NCOUNTERS - 1;
if (pktc_idx >= 0) {
iq->intr_params |= F_QINTR_CNT_EN;
iq->intr_pktc_idx = pktc_idx;
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
iq->qsize = roundup2(qsize, 16); /* See FW_IQ_CMD/iqsize */
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
iq->sidx = iq->qsize - sc->params.sge.spg_len / IQ_ESIZE;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static inline void
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
init_fl(struct adapter *sc, struct sge_fl *fl, int qsize, int maxp, char *name)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
fl->qsize = qsize;
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
fl->sidx = qsize - sc->params.sge.spg_len / EQ_ESIZE;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
strlcpy(fl->lockname, name, sizeof(fl->lockname));
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
if (sc->flags & BUF_PACKING_OK &&
((!is_t4(sc) && buffer_packing) || /* T5+: enabled unless 0 */
(is_t4(sc) && buffer_packing == 1)))/* T4: disabled unless 1 */
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
fl->flags |= FL_BUF_PACKING;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
find_best_refill_source(sc, fl, maxp);
find_safe_refill_source(sc, fl);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static inline void
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
init_eq(struct adapter *sc, struct sge_eq *eq, int eqtype, int qsize,
uint8_t tx_chan, uint16_t iqid, char *name)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(eqtype <= EQ_TYPEMASK, ("%s: bad qtype %d", __func__, eqtype));
eq->flags = eqtype & EQ_TYPEMASK;
eq->tx_chan = tx_chan;
eq->iqid = iqid;
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
eq->sidx = qsize - sc->params.sge.spg_len / EQ_ESIZE;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
strlcpy(eq->lockname, name, sizeof(eq->lockname));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static int
alloc_ring(struct adapter *sc, size_t len, bus_dma_tag_t *tag,
bus_dmamap_t *map, bus_addr_t *pa, void **va)
{
int rc;
rc = bus_dma_tag_create(sc->dmat, 512, 0, BUS_SPACE_MAXADDR,
BUS_SPACE_MAXADDR, NULL, NULL, len, 1, len, 0, NULL, NULL, tag);
if (rc != 0) {
device_printf(sc->dev, "cannot allocate DMA tag: %d\n", rc);
goto done;
}
rc = bus_dmamem_alloc(*tag, va,
BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO, map);
if (rc != 0) {
device_printf(sc->dev, "cannot allocate DMA memory: %d\n", rc);
goto done;
}
rc = bus_dmamap_load(*tag, *map, *va, len, oneseg_dma_callback, pa, 0);
if (rc != 0) {
device_printf(sc->dev, "cannot load DMA map: %d\n", rc);
goto done;
}
done:
if (rc)
free_ring(sc, *tag, *map, *pa, *va);
return (rc);
}
static int
free_ring(struct adapter *sc, bus_dma_tag_t tag, bus_dmamap_t map,
bus_addr_t pa, void *va)
{
if (pa)
bus_dmamap_unload(tag, map);
if (va)
bus_dmamem_free(tag, va, map);
if (tag)
bus_dma_tag_destroy(tag);
return (0);
}
/*
* Allocates the ring for an ingress queue and an optional freelist. If the
* freelist is specified it will be allocated and then associated with the
* ingress queue.
*
* Returns errno on failure. Resources allocated up to that point may still be
* allocated. Caller is responsible for cleanup in case this function fails.
*
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
* If the ingress queue will take interrupts directly then the intr_idx
* specifies the vector, starting from 0. -1 means the interrupts for this
* queue should be forwarded to the fwq.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
alloc_iq_fl(struct vi_info *vi, struct sge_iq *iq, struct sge_fl *fl,
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
int intr_idx, int cong)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
int rc, i, cntxt_id;
size_t len;
struct fw_iq_cmd c;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct port_info *pi = vi->pi;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct adapter *sc = iq->adapter;
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
struct sge_params *sp = &sc->params.sge;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
__be32 v = 0;
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
len = iq->qsize * IQ_ESIZE;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rc = alloc_ring(sc, len, &iq->desc_tag, &iq->desc_map, &iq->ba,
(void **)&iq->desc);
if (rc != 0)
return (rc);
bzero(&c, sizeof(c));
c.op_to_vfn = htobe32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST |
F_FW_CMD_WRITE | F_FW_CMD_EXEC | V_FW_IQ_CMD_PFN(sc->pf) |
V_FW_IQ_CMD_VFN(0));
c.alloc_to_len16 = htobe32(F_FW_IQ_CMD_ALLOC | F_FW_IQ_CMD_IQSTART |
FW_LEN16(c));
/* Special handling for firmware event queue */
if (iq == &sc->sge.fwq)
v |= F_FW_IQ_CMD_IQASYNCH;
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
if (intr_idx < 0) {
/* Forwarded interrupts, all headed to fwq */
v |= F_FW_IQ_CMD_IQANDST;
v |= V_FW_IQ_CMD_IQANDSTINDEX(sc->sge.fwq.cntxt_id);
} else {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
KASSERT(intr_idx < sc->intr_count,
("%s: invalid direct intr_idx %d", __func__, intr_idx));
cxgbe(4): Do not forward interrupts to queues with freelists. This leaves the firmware event queue (fwq) as the only queue that can take interrupts for others. This simplifies cfg_itype_and_nqueues and queue allocation in the driver at the cost of a little (never?) used configuration. It also allows service_iq to be split into two specialized variants in the future. MFC after: 2 months Sponsored by: Chelsio Communications
2017-12-22 19:10:19 +00:00
v |= V_FW_IQ_CMD_IQANDSTINDEX(intr_idx);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
c.type_to_iqandstindex = htobe32(v |
V_FW_IQ_CMD_TYPE(FW_IQ_TYPE_FL_INT_CAP) |
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
V_FW_IQ_CMD_VIID(vi->viid) |
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
V_FW_IQ_CMD_IQANUD(X_UPDATEDELIVERY_INTERRUPT));
c.iqdroprss_to_iqesize = htobe16(V_FW_IQ_CMD_IQPCIECH(pi->tx_chan) |
F_FW_IQ_CMD_IQGTSMODE |
V_FW_IQ_CMD_IQINTCNTTHRESH(iq->intr_pktc_idx) |
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
V_FW_IQ_CMD_IQESIZE(ilog2(IQ_ESIZE) - 4));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
c.iqsize = htobe16(iq->qsize);
c.iqaddr = htobe64(iq->ba);
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
if (cong >= 0)
c.iqns_to_fl0congen = htobe32(F_FW_IQ_CMD_IQFLINTCONGEN);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (fl) {
mtx_init(&fl->fl_lock, fl->lockname, NULL, MTX_DEF);
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
len = fl->qsize * EQ_ESIZE;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rc = alloc_ring(sc, len, &fl->desc_tag, &fl->desc_map,
&fl->ba, (void **)&fl->desc);
if (rc)
return (rc);
/* Allocate space for one software descriptor per buffer. */
rc = alloc_fl_sdesc(fl);
if (rc != 0) {
device_printf(sc->dev,
"failed to setup fl software descriptors: %d\n",
rc);
return (rc);
}
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
if (fl->flags & FL_BUF_PACKING) {
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
fl->lowat = roundup2(sp->fl_starve_threshold2, 8);
fl->buf_boundary = sp->pack_boundary;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
} else {
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
fl->lowat = roundup2(sp->fl_starve_threshold, 8);
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
fl->buf_boundary = 16;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
}
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
if (fl_pad && fl->buf_boundary < sp->pad_boundary)
fl->buf_boundary = sp->pad_boundary;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Do not clobber the ingress queue's congestion setting. MFC after: 1 month
2011-12-14 05:34:23 +00:00
c.iqns_to_fl0congen |=
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
htobe32(V_FW_IQ_CMD_FL0HOSTFCMODE(X_HOSTFCMODE_NONE) |
F_FW_IQ_CMD_FL0FETCHRO | F_FW_IQ_CMD_FL0DATARO |
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
(fl_pad ? F_FW_IQ_CMD_FL0PADEN : 0) |
(fl->flags & FL_BUF_PACKING ? F_FW_IQ_CMD_FL0PACKEN :
0));
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
if (cong >= 0) {
c.iqns_to_fl0congen |=
htobe32(V_FW_IQ_CMD_FL0CNGCHMAP(cong) |
F_FW_IQ_CMD_FL0CONGCIF |
F_FW_IQ_CMD_FL0CONGEN);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
c.fl0dcaen_to_fl0cidxfthresh =
cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6. Sponsored by: Chelsio Communications
2016-09-11 17:51:17 +00:00
htobe16(V_FW_IQ_CMD_FL0FBMIN(chip_id(sc) <= CHELSIO_T5 ?
X_FETCHBURSTMIN_128B : X_FETCHBURSTMIN_64B) |
V_FW_IQ_CMD_FL0FBMAX(chip_id(sc) <= CHELSIO_T5 ?
X_FETCHBURSTMAX_512B : X_FETCHBURSTMAX_256B));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
c.fl0size = htobe16(fl->qsize);
c.fl0addr = htobe64(fl->ba);
}
rc = -t4_wr_mbox(sc, sc->mbox, &c, sizeof(c), &c);
if (rc != 0) {
device_printf(sc->dev,
"failed to create ingress queue: %d\n", rc);
return (rc);
}
iq->cidx = 0;
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
iq->gen = F_RSPD_GEN;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
iq->intr_next = iq->intr_params;
iq->cntxt_id = be16toh(c.iqid);
iq->abs_id = be16toh(c.physiqid);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
iq->flags |= IQ_ALLOCATED;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cntxt_id = iq->cntxt_id - sc->sge.iq_start;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (cntxt_id >= sc->sge.niq) {
panic ("%s: iq->cntxt_id (%d) more than the max (%d)", __func__,
cntxt_id, sc->sge.niq - 1);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
sc->sge.iqmap[cntxt_id] = iq;
if (fl) {
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
u_int qid;
iq->flags |= IQ_HAS_FL;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
fl->cntxt_id = be16toh(c.fl0id);
fl->pidx = fl->cidx = 0;
Fix an error while constructing the table that maps context id -> egress queue. MFC after: 1 day
2011-03-22 21:05:56 +00:00
cntxt_id = fl->cntxt_id - sc->sge.eq_start;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (cntxt_id >= sc->sge.neq) {
panic("%s: fl->cntxt_id (%d) more than the max (%d)",
__func__, cntxt_id, sc->sge.neq - 1);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
sc->sge.eqmap[cntxt_id] = (void *)fl;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
qid = fl->cntxt_id;
if (isset(&sc->doorbells, DOORBELL_UDB)) {
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
uint32_t s_qpp = sc->params.sge.eq_s_qpp;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
uint32_t mask = (1 << s_qpp) - 1;
volatile uint8_t *udb;
udb = sc->udbs_base + UDBS_DB_OFFSET;
udb += (qid >> s_qpp) << PAGE_SHIFT;
qid &= mask;
if (qid < PAGE_SIZE / UDBS_SEG_SIZE) {
udb += qid << UDBS_SEG_SHIFT;
qid = 0;
}
fl->udb = (volatile void *)udb;
}
cxgbe(4): Very basic T6 awareness. This is part of ongoing work to update to the latest internal shared code. - Add a chip_params structure to keep track of hardware constants for all generations of Terminators handled by cxgbe. - Update t4_hw_pci_read_cfg4 to work with T6. - Update the hardware debug sysctls (hidden within dev.<tNnex>.<n>.misc.*) to work with T6. Most of the changes are in the decoders for the CIM logic analyzer and the MPS TCAM. - Acquire the regwin lock around indirect register accesses. Obtained from: Chelsio Communications Sponsored by: Chelsio Communications
2016-03-04 13:11:13 +00:00
fl->dbval = V_QID(qid) | sc->chip_params->sge_fl_db;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
FL_LOCK(fl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* Enough to make sure the SGE doesn't think it's starved */
refill_fl(sc, fl, fl->lowat);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
FL_UNLOCK(fl);
}
cxgbe(4): Setup congestion response for T6 rx queues.
2016-09-21 00:50:22 +00:00
if (chip_id(sc) >= CHELSIO_T5 && !(sc->flags & IS_VF) && cong >= 0) {
Set up congestion manager context properly for T5 based cards. MFC after: 3 days (will check with re@)
2013-08-01 23:38:30 +00:00
uint32_t param, val;
param = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) |
V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DMAQ_CONM_CTXT) |
V_FW_PARAMS_PARAM_YZ(iq->cntxt_id);
Fix previous commit (r253873). "cong" has one bit per channel but the congestion channel map has 1 nibble per channel. So bits wxyz need to be blown up into 000w000x000y000z.
2013-08-02 17:44:19 +00:00
if (cong == 0)
val = 1 << 19;
else {
val = 2 << 19;
for (i = 0; i < 4; i++) {
if (cong & (1 << i))
val |= 1 << (i << 2);
}
}
Set up congestion manager context properly for T5 based cards. MFC after: 3 days (will check with re@)
2013-08-01 23:38:30 +00:00
rc = -t4_set_params(sc, sc->mbox, sc->pf, 0, 1, &param, &val);
if (rc != 0) {
/* report error but carry on */
device_printf(sc->dev,
"failed to set congestion manager context for "
"ingress queue %d: %d\n", iq->cntxt_id, rc);
}
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* Enable IQ interrupts */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
atomic_store_rel_int(&iq->state, IQS_IDLE);
Store the offset of the KDOORBELL and GTS registers in the softc. VF devices use a different register layout than PF devices. Storing the offset in a value in the softc allows code to be shared between the PF and VF drivers. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7389
2016-08-01 22:39:51 +00:00
t4_write_reg(sc, sc->sge_gts_reg, V_SEINTARM(iq->intr_params) |
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
V_INGRESSQID(iq->cntxt_id));
return (0);
}
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
free_iq_fl(struct vi_info *vi, struct sge_iq *iq, struct sge_fl *fl)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
int rc;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct adapter *sc = iq->adapter;
device_t dev;
if (sc == NULL)
return (0); /* nothing to do */
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
dev = vi ? vi->dev : sc->dev;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (iq->flags & IQ_ALLOCATED) {
rc = -t4_iq_free(sc, sc->mbox, sc->pf, 0,
FW_IQ_TYPE_FL_INT_CAP, iq->cntxt_id,
fl ? fl->cntxt_id : 0xffff, 0xffff);
if (rc != 0) {
device_printf(dev,
"failed to free queue %p: %d\n", iq, rc);
return (rc);
}
iq->flags &= ~IQ_ALLOCATED;
}
free_ring(sc, iq->desc_tag, iq->desc_map, iq->ba, iq->desc);
bzero(iq, sizeof(*iq));
if (fl) {
free_ring(sc, fl->desc_tag, fl->desc_map, fl->ba,
fl->desc);
There is no need to hold the freelist lock around alloc/free of software descriptors. This also silences WITNESS warnings when the software descriptors are allocated with M_WAITOK. MFC after: 1 week
2013-08-23 18:03:18 +00:00
if (fl->sdesc)
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
free_fl_sdesc(sc, fl);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (mtx_initialized(&fl->fl_lock))
mtx_destroy(&fl->fl_lock);
bzero(fl, sizeof(*fl));
}
return (0);
}
cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. Sponsored by: Chelsio Communications
2017-12-29 02:30:21 +00:00
static void
add_iq_sysctls(struct sysctl_ctx_list *ctx, struct sysctl_oid *oid,
struct sge_iq *iq)
{
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
SYSCTL_ADD_UAUTO(ctx, children, OID_AUTO, "ba", CTLFLAG_RD, &iq->ba,
"bus address of descriptor ring");
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "dmalen", CTLFLAG_RD, NULL,
iq->qsize * IQ_ESIZE, "descriptor ring size in bytes");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "abs_id",
CTLTYPE_INT | CTLFLAG_RD, &iq->abs_id, 0, sysctl_uint16, "I",
"absolute id of the queue");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cntxt_id",
CTLTYPE_INT | CTLFLAG_RD, &iq->cntxt_id, 0, sysctl_uint16, "I",
"SGE context id of the queue");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cidx",
CTLTYPE_INT | CTLFLAG_RD, &iq->cidx, 0, sysctl_uint16, "I",
"consumer index");
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
static void
cxgbe(4): Make the location/length of all descriptor rings available in the sysctl MIB.
2016-09-23 20:03:28 +00:00
add_fl_sysctls(struct adapter *sc, struct sysctl_ctx_list *ctx,
struct sysctl_oid *oid, struct sge_fl *fl)
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
{
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
oid = SYSCTL_ADD_NODE(ctx, children, OID_AUTO, "fl", CTLFLAG_RD, NULL,
"freelist");
children = SYSCTL_CHILDREN(oid);
cxgbe(4): Make the location/length of all descriptor rings available in the sysctl MIB.
2016-09-23 20:03:28 +00:00
SYSCTL_ADD_UAUTO(ctx, children, OID_AUTO, "ba", CTLFLAG_RD,
&fl->ba, "bus address of descriptor ring");
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "dmalen", CTLFLAG_RD, NULL,
fl->sidx * EQ_ESIZE + sc->params.sge.spg_len,
"desc ring size in bytes");
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cntxt_id",
CTLTYPE_INT | CTLFLAG_RD, &fl->cntxt_id, 0, sysctl_uint16, "I",
"SGE context id of the freelist");
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "padding", CTLFLAG_RD, NULL,
fl_pad ? 1 : 0, "padding enabled");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "packing", CTLFLAG_RD, NULL,
fl->flags & FL_BUF_PACKING ? 1 : 0, "packing enabled");
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "cidx", CTLFLAG_RD, &fl->cidx,
0, "consumer index");
if (fl->flags & FL_BUF_PACKING) {
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "rx_offset",
CTLFLAG_RD, &fl->rx_offset, 0, "packing rx offset");
}
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "pidx", CTLFLAG_RD, &fl->pidx,
0, "producer index");
SYSCTL_ADD_UQUAD(ctx, children, OID_AUTO, "mbuf_allocated",
CTLFLAG_RD, &fl->mbuf_allocated, "# of mbuf allocated");
SYSCTL_ADD_UQUAD(ctx, children, OID_AUTO, "mbuf_inlined",
CTLFLAG_RD, &fl->mbuf_inlined, "# of mbuf inlined in clusters");
SYSCTL_ADD_UQUAD(ctx, children, OID_AUTO, "cluster_allocated",
CTLFLAG_RD, &fl->cl_allocated, "# of clusters allocated");
SYSCTL_ADD_UQUAD(ctx, children, OID_AUTO, "cluster_recycled",
CTLFLAG_RD, &fl->cl_recycled, "# of clusters recycled");
SYSCTL_ADD_UQUAD(ctx, children, OID_AUTO, "cluster_fast_recycled",
CTLFLAG_RD, &fl->cl_fast_recycled, "# of clusters recycled (fast)");
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
alloc_fwq(struct adapter *sc)
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc, intr_idx;
struct sge_iq *fwq = &sc->sge.fwq;
struct sysctl_oid *oid = device_get_sysctl_tree(sc->dev);
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
cxgbe(4): minor optimizations in ingress queue processing. Reorganize struct sge_iq. Make the iq entry size a compile time constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly. MFC after: 2 weeks
2014-08-02 00:56:34 +00:00
init_iq(fwq, sc, 0, 0, FW_IQ_QSIZE);
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
if (sc->flags & IS_VF)
intr_idx = 0;
else {
intr_idx = sc->intr_count > 1 ? 1 : 0;
fwq->set_tcb_rpl = t4_filter_rpl;
fwq->l2t_write_rpl = do_l2t_write_rpl;
}
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
rc = alloc_iq_fl(&sc->port[0]->vi[0], fwq, NULL, intr_idx, -1);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (rc != 0) {
device_printf(sc->dev,
"failed to create firmware event queue: %d\n", rc);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
return (rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
oid = SYSCTL_ADD_NODE(&sc->ctx, children, OID_AUTO, "fwq", CTLFLAG_RD,
NULL, "firmware event queue");
cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. Sponsored by: Chelsio Communications
2017-12-29 02:30:21 +00:00
add_iq_sysctls(&sc->ctx, oid, fwq);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
}
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
free_fwq(struct adapter *sc)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return free_iq_fl(NULL, &sc->sge.fwq, NULL);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
}
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
alloc_mgmtq(struct adapter *sc)
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
{
int rc;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_wrq *mgmtq = &sc->sge.mgmtq;
char name[16];
struct sysctl_oid *oid = device_get_sysctl_tree(sc->dev);
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
oid = SYSCTL_ADD_NODE(&sc->ctx, children, OID_AUTO, "mgmtq", CTLFLAG_RD,
NULL, "management queue");
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
snprintf(name, sizeof(name), "%s mgmtq", device_get_nameunit(sc->dev));
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
init_eq(sc, &mgmtq->eq, EQ_CTRL, CTRL_EQ_QSIZE, sc->port[0]->tx_chan,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sc->sge.fwq.cntxt_id, name);
rc = alloc_wrq(sc, NULL, mgmtq, oid);
if (rc != 0) {
device_printf(sc->dev,
"failed to create management queue: %d\n", rc);
return (rc);
}
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
free_mgmtq(struct adapter *sc)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return free_wrq(sc, &sc->sge.mgmtq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): set up congestion management for netmap rx queues. The hw.cxgbe.cong_drop knob controls the response of the chip when netmap queues are congested.
2015-02-24 18:40:10 +00:00
int
cxgbe(4): Add a new knob that controls the congestion response of netmap rx queues. The default is to drop rather than backpressure. This decouples the congestion settings of NIC and netmap rx queues. MFC after: 3 days
2015-07-06 20:56:59 +00:00
tnl_cong(struct port_info *pi, int drop)
Convert some fixed parameters to tunables (with reasonable default values). - cong_drop specifies what to do on congestion: nothing, backpressure, or drop. - fl_pktshift specifies the padding before Ethernet payload. - fl_pad specifies the boundary upto which to pad Ethernet payload. - spg_len controls the length of the status page. MFC after: 2 weeks
2012-08-14 21:47:41 +00:00
{
cxgbe(4): Add a new knob that controls the congestion response of netmap rx queues. The default is to drop rather than backpressure. This decouples the congestion settings of NIC and netmap rx queues. MFC after: 3 days
2015-07-06 20:56:59 +00:00
if (drop == -1)
Convert some fixed parameters to tunables (with reasonable default values). - cong_drop specifies what to do on congestion: nothing, backpressure, or drop. - fl_pktshift specifies the padding before Ethernet payload. - fl_pad specifies the boundary upto which to pad Ethernet payload. - spg_len controls the length of the status page. MFC after: 2 weeks
2012-08-14 21:47:41 +00:00
return (-1);
cxgbe(4): Add a new knob that controls the congestion response of netmap rx queues. The default is to drop rather than backpressure. This decouples the congestion settings of NIC and netmap rx queues. MFC after: 3 days
2015-07-06 20:56:59 +00:00
else if (drop == 1)
Convert some fixed parameters to tunables (with reasonable default values). - cong_drop specifies what to do on congestion: nothing, backpressure, or drop. - fl_pktshift specifies the padding before Ethernet payload. - fl_pad specifies the boundary upto which to pad Ethernet payload. - spg_len controls the length of the status page. MFC after: 2 weeks
2012-08-14 21:47:41 +00:00
return (0);
else
cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. MFC after: 2 weeks Sponsored by: Chelsio Communications
2017-10-24 05:41:48 +00:00
return (pi->rx_e_chan_map);
Convert some fixed parameters to tunables (with reasonable default values). - cong_drop specifies what to do on congestion: nothing, backpressure, or drop. - fl_pktshift specifies the padding before Ethernet payload. - fl_pad specifies the boundary upto which to pad Ethernet payload. - spg_len controls the length of the status page. MFC after: 2 weeks
2012-08-14 21:47:41 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
alloc_rxq(struct vi_info *vi, struct sge_rxq *rxq, int intr_idx, int idx,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid *oid)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
int rc;
Track the base absolute ID of ingress and egress queues. Use this to map an absolute queue ID to a logical queue ID in interrupt handlers. For the regular cxgbe/cxl drivers this should be a no-op as the base absolute ID should be zero. VF devices have a non-zero base absolute ID and require this change. While here, export the absolute ID of egress queues via a sysctl. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7446
2016-08-09 17:49:42 +00:00
struct adapter *sc = vi->pi->adapter;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct sysctl_oid_list *children;
char name[16];
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
rc = alloc_iq_fl(vi, &rxq->iq, &rxq->fl, intr_idx,
tnl_cong(vi->pi, cong_drop));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0)
return (rc);
Track the base absolute ID of ingress and egress queues. Use this to map an absolute queue ID to a logical queue ID in interrupt handlers. For the regular cxgbe/cxl drivers this should be a no-op as the base absolute ID should be zero. VF devices have a non-zero base absolute ID and require this change. While here, export the absolute ID of egress queues via a sysctl. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7446
2016-08-09 17:49:42 +00:00
if (idx == 0)
sc->sge.iq_base = rxq->iq.abs_id - rxq->iq.cntxt_id;
else
KASSERT(rxq->iq.cntxt_id + sc->sge.iq_base == rxq->iq.abs_id,
("iq_base mismatch"));
KASSERT(sc->sge.iq_base == 0 || sc->flags & IS_VF,
("PF with non-zero iq_base"));
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
/*
* The freelist is just barely above the starvation threshold right now,
* fill it up a bit more.
*/
Allow lazy fill up of freelists. MFC after: 3 days
2011-06-04 23:31:33 +00:00
FL_LOCK(&rxq->fl);
Track the base absolute ID of ingress and egress queues. Use this to map an absolute queue ID to a logical queue ID in interrupt handlers. For the regular cxgbe/cxl drivers this should be a no-op as the base absolute ID should be zero. VF devices have a non-zero base absolute ID and require this change. While here, export the absolute ID of egress queues via a sysctl. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7446
2016-08-09 17:49:42 +00:00
refill_fl(sc, &rxq->fl, 128);
Allow lazy fill up of freelists. MFC after: 3 days
2011-06-04 23:31:33 +00:00
FL_UNLOCK(&rxq->fl);
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
#if defined(INET) || defined(INET6)
cxgbe: Add tunables to control the number of LRO entries and the number of rx mbufs that should be presorted before LRO. There is no change in default behavior. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-17 09:00:20 +00:00
rc = tcp_lro_init_args(&rxq->lro, vi->ifp, lro_entries, lro_mbufs);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0)
return (rc);
cxgbe: Add tunables to control the number of LRO entries and the number of rx mbufs that should be presorted before LRO. There is no change in default behavior. MFC after: 1 week Sponsored by: Chelsio Communications
2017-04-17 09:00:20 +00:00
MPASS(rxq->lro.ifp == vi->ifp); /* also indicates LRO init'ed */
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
if (vi->ifp->if_capenable & IFCAP_LRO)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rxq->iq.flags |= IQ_LRO_ENABLED;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#endif
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
rxq->ifp = vi->ifp;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
children = SYSCTL_CHILDREN(oid);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
snprintf(name, sizeof(name), "%d", idx);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
oid = SYSCTL_ADD_NODE(&vi->ctx, children, OID_AUTO, name, CTLFLAG_RD,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
NULL, "rx queue");
children = SYSCTL_CHILDREN(oid);
cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. Sponsored by: Chelsio Communications
2017-12-29 02:30:21 +00:00
add_iq_sysctls(&vi->ctx, oid, &rxq->iq);
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
#if defined(INET) || defined(INET6)
Add optimizing LRO wrapper: - Add optimizing LRO wrapper which pre-sorts all incoming packets according to the hash type and flowid. This prevents exhaustion of the LRO entries due to too many connections at the same time. Testing using a larger number of higher bandwidth TCP connections showed that the incoming ACK packet aggregation rate increased from ~1.3:1 to almost 3:1. Another test showed that for a number of TCP connections greater than 16 per hardware receive ring, where 8 TCP connections was the LRO active entry limit, there was a significant improvement in throughput due to being able to fully aggregate more than 8 TCP stream. For very few very high bandwidth TCP streams, the optimizing LRO wrapper will add CPU usage instead of reducing CPU usage. This is expected. Network drivers which want to use the optimizing LRO wrapper needs to call "tcp_lro_queue_mbuf()" instead of "tcp_lro_rx()" and "tcp_lro_flush_all()" instead of "tcp_lro_flush()". Further the LRO control structure must be initialized using "tcp_lro_init_args()" passing a non-zero number into the "lro_mbufs" argument. - Make LRO statistics 64-bit. Previously 32-bit integers were used for statistics which can be prone to wrap-around. Fix this while at it and update all SYSCTL's which expose LRO statistics. - Ensure all data is freed when destroying a LRO control structures, especially leftover LRO entries. - Reduce number of memory allocations needed when setting up a LRO control structure by precomputing the total amount of memory needed. - Add own memory allocation counter for LRO. - Bump the FreeBSD version to force recompilation of all KLDs due to change of the LRO control structure size. Sponsored by: Mellanox Technologies Reviewed by: gallatin, sbruno, rrs, gnn, transport Tested by: Netflix Differential Revision: https://reviews.freebsd.org/D4914
2016-01-19 15:33:28 +00:00
SYSCTL_ADD_U64(&vi->ctx, children, OID_AUTO, "lro_queued", CTLFLAG_RD,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
&rxq->lro.lro_queued, 0, NULL);
Add optimizing LRO wrapper: - Add optimizing LRO wrapper which pre-sorts all incoming packets according to the hash type and flowid. This prevents exhaustion of the LRO entries due to too many connections at the same time. Testing using a larger number of higher bandwidth TCP connections showed that the incoming ACK packet aggregation rate increased from ~1.3:1 to almost 3:1. Another test showed that for a number of TCP connections greater than 16 per hardware receive ring, where 8 TCP connections was the LRO active entry limit, there was a significant improvement in throughput due to being able to fully aggregate more than 8 TCP stream. For very few very high bandwidth TCP streams, the optimizing LRO wrapper will add CPU usage instead of reducing CPU usage. This is expected. Network drivers which want to use the optimizing LRO wrapper needs to call "tcp_lro_queue_mbuf()" instead of "tcp_lro_rx()" and "tcp_lro_flush_all()" instead of "tcp_lro_flush()". Further the LRO control structure must be initialized using "tcp_lro_init_args()" passing a non-zero number into the "lro_mbufs" argument. - Make LRO statistics 64-bit. Previously 32-bit integers were used for statistics which can be prone to wrap-around. Fix this while at it and update all SYSCTL's which expose LRO statistics. - Ensure all data is freed when destroying a LRO control structures, especially leftover LRO entries. - Reduce number of memory allocations needed when setting up a LRO control structure by precomputing the total amount of memory needed. - Add own memory allocation counter for LRO. - Bump the FreeBSD version to force recompilation of all KLDs due to change of the LRO control structure size. Sponsored by: Mellanox Technologies Reviewed by: gallatin, sbruno, rrs, gnn, transport Tested by: Netflix Differential Revision: https://reviews.freebsd.org/D4914
2016-01-19 15:33:28 +00:00
SYSCTL_ADD_U64(&vi->ctx, children, OID_AUTO, "lro_flushed", CTLFLAG_RD,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
&rxq->lro.lro_flushed, 0, NULL);
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
#endif
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UQUAD(&vi->ctx, children, OID_AUTO, "rxcsum", CTLFLAG_RD,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
&rxq->rxcsum, "# of times hardware assisted with checksum");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UQUAD(&vi->ctx, children, OID_AUTO, "vlan_extraction",
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
CTLFLAG_RD, &rxq->vlan_extraction,
"# of times hardware extracted 802.1Q tag");
cxgbe(4): Make the location/length of all descriptor rings available in the sysctl MIB.
2016-09-23 20:03:28 +00:00
add_fl_sysctls(sc, &vi->ctx, oid, &rxq->fl);
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
free_rxq(struct vi_info *vi, struct sge_rxq *rxq)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc;
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
#if defined(INET) || defined(INET6)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (rxq->lro.ifp) {
tcp_lro_free(&rxq->lro);
rxq->lro.ifp = NULL;
}
#endif
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
rc = free_iq_fl(vi, &rxq->iq, &rxq->fl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (rc == 0)
bzero(rxq, sizeof(*rxq));
return (rc);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
alloc_ofld_rxq(struct vi_info *vi, struct sge_ofld_rxq *ofld_rxq,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int intr_idx, int idx, struct sysctl_oid *oid)
{
cxgbe(4): Make the location/length of all descriptor rings available in the sysctl MIB.
2016-09-23 20:03:28 +00:00
struct port_info *pi = vi->pi;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc;
struct sysctl_oid_list *children;
char name[16];
cxgbe(4): Read the MPS buffer group map from the firmware as it could be different from hardware defaults. The congestion channel map, which is still fixed, needs to be tracked separately now. Change the congestion setting for TOE rx queues to match the drivers on other OSes while here. MFC after: 2 weeks Sponsored by: Chelsio Communications
2017-10-24 05:41:48 +00:00
rc = alloc_iq_fl(vi, &ofld_rxq->iq, &ofld_rxq->fl, intr_idx, 0);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (rc != 0)
return (rc);
children = SYSCTL_CHILDREN(oid);
snprintf(name, sizeof(name), "%d", idx);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
oid = SYSCTL_ADD_NODE(&vi->ctx, children, OID_AUTO, name, CTLFLAG_RD,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
NULL, "rx queue");
cxgbe(4): Reduce duplication by consolidating minor variations of the same code into a single routine. Sponsored by: Chelsio Communications
2017-12-29 02:30:21 +00:00
add_iq_sysctls(&vi->ctx, oid, &ofld_rxq->iq);
cxgbe(4): Make the location/length of all descriptor rings available in the sysctl MIB.
2016-09-23 20:03:28 +00:00
add_fl_sysctls(pi->adapter, &vi->ctx, oid, &ofld_rxq->fl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (rc);
}
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
free_ofld_rxq(struct vi_info *vi, struct sge_ofld_rxq *ofld_rxq)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
{
int rc;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
rc = free_iq_fl(vi, &ofld_rxq->iq, &ofld_rxq->fl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (rc == 0)
bzero(ofld_rxq, sizeof(*ofld_rxq));
return (rc);
}
#endif
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
#ifdef DEV_NETMAP
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
alloc_nm_rxq(struct vi_info *vi, struct sge_nm_rxq *nm_rxq, int intr_idx,
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
int idx, struct sysctl_oid *oid)
{
int rc;
struct sysctl_oid_list *children;
struct sysctl_ctx_list *ctx;
char name[16];
size_t len;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct adapter *sc = vi->pi->adapter;
struct netmap_adapter *na = NA(vi->ifp);
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
MPASS(na != NULL);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
len = vi->qsize_rxq * IQ_ESIZE;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
rc = alloc_ring(sc, len, &nm_rxq->iq_desc_tag, &nm_rxq->iq_desc_map,
&nm_rxq->iq_ba, (void **)&nm_rxq->iq_desc);
if (rc != 0)
return (rc);
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
len = na->num_rx_desc * EQ_ESIZE + sc->params.sge.spg_len;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
rc = alloc_ring(sc, len, &nm_rxq->fl_desc_tag, &nm_rxq->fl_desc_map,
&nm_rxq->fl_ba, (void **)&nm_rxq->fl_desc);
if (rc != 0)
return (rc);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
nm_rxq->vi = vi;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
nm_rxq->nid = idx;
nm_rxq->iq_cidx = 0;
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
nm_rxq->iq_sidx = vi->qsize_rxq - sc->params.sge.spg_len / IQ_ESIZE;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
nm_rxq->iq_gen = F_RSPD_GEN;
nm_rxq->fl_pidx = nm_rxq->fl_cidx = 0;
nm_rxq->fl_sidx = na->num_rx_desc;
nm_rxq->intr_idx = intr_idx;
cxgbe(4): Fix per-queue netmap operation. Do not attempt to initialize netmap queues that are already initialized or aren't supposed to be initialized. Similarly, do not free queues that are not initialized or aren't supposed to be freed. PR: 217156 Sponsored by: Chelsio Communications
2017-06-15 19:56:59 +00:00
nm_rxq->iq_cntxt_id = INVALID_NM_RXQ_CNTXT_ID;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
ctx = &vi->ctx;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
children = SYSCTL_CHILDREN(oid);
snprintf(name, sizeof(name), "%d", idx);
oid = SYSCTL_ADD_NODE(ctx, children, OID_AUTO, name, CTLFLAG_RD, NULL,
"rx queue");
children = SYSCTL_CHILDREN(oid);
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "abs_id",
CTLTYPE_INT | CTLFLAG_RD, &nm_rxq->iq_abs_id, 0, sysctl_uint16,
"I", "absolute id of the queue");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cntxt_id",
CTLTYPE_INT | CTLFLAG_RD, &nm_rxq->iq_cntxt_id, 0, sysctl_uint16,
"I", "SGE context id of the queue");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cidx",
CTLTYPE_INT | CTLFLAG_RD, &nm_rxq->iq_cidx, 0, sysctl_uint16, "I",
"consumer index");
children = SYSCTL_CHILDREN(oid);
oid = SYSCTL_ADD_NODE(ctx, children, OID_AUTO, "fl", CTLFLAG_RD, NULL,
"freelist");
children = SYSCTL_CHILDREN(oid);
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cntxt_id",
CTLTYPE_INT | CTLFLAG_RD, &nm_rxq->fl_cntxt_id, 0, sysctl_uint16,
"I", "SGE context id of the freelist");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "cidx", CTLFLAG_RD,
&nm_rxq->fl_cidx, 0, "consumer index");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "pidx", CTLFLAG_RD,
&nm_rxq->fl_pidx, 0, "producer index");
return (rc);
}
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
free_nm_rxq(struct vi_info *vi, struct sge_nm_rxq *nm_rxq)
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
{
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct adapter *sc = vi->pi->adapter;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
cxgbe(4): Fix some assertions during driver detach. The netmap queues can't be initialized if the VI isn't. MFC after: 3 days
2017-08-28 03:25:41 +00:00
if (vi->flags & VI_INIT_DONE)
MPASS(nm_rxq->iq_cntxt_id == INVALID_NM_RXQ_CNTXT_ID);
else
MPASS(nm_rxq->iq_cntxt_id == 0);
cxgbe(4): Fix per-queue netmap operation. Do not attempt to initialize netmap queues that are already initialized or aren't supposed to be initialized. Similarly, do not free queues that are not initialized or aren't supposed to be freed. PR: 217156 Sponsored by: Chelsio Communications
2017-06-15 19:56:59 +00:00
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
free_ring(sc, nm_rxq->iq_desc_tag, nm_rxq->iq_desc_map, nm_rxq->iq_ba,
nm_rxq->iq_desc);
free_ring(sc, nm_rxq->fl_desc_tag, nm_rxq->fl_desc_map, nm_rxq->fl_ba,
nm_rxq->fl_desc);
return (0);
}
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
alloc_nm_txq(struct vi_info *vi, struct sge_nm_txq *nm_txq, int iqidx, int idx,
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
struct sysctl_oid *oid)
{
int rc;
size_t len;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct port_info *pi = vi->pi;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
struct adapter *sc = pi->adapter;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct netmap_adapter *na = NA(vi->ifp);
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
char name[16];
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
len = na->num_tx_desc * EQ_ESIZE + sc->params.sge.spg_len;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
rc = alloc_ring(sc, len, &nm_txq->desc_tag, &nm_txq->desc_map,
&nm_txq->ba, (void **)&nm_txq->desc);
if (rc)
return (rc);
nm_txq->pidx = nm_txq->cidx = 0;
nm_txq->sidx = na->num_tx_desc;
nm_txq->nid = idx;
nm_txq->iqidx = iqidx;
nm_txq->cpl_ctrl0 = htobe32(V_TXPKT_OPCODE(CPL_TX_PKT) |
cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests.
2016-09-15 08:30:47 +00:00
V_TXPKT_INTF(pi->tx_chan) | V_TXPKT_PF(G_FW_VIID_PFN(vi->viid)) |
V_TXPKT_VF(G_FW_VIID_VIN(vi->viid)) |
V_TXPKT_VF_VLD(G_FW_VIID_VIVLD(vi->viid)));
cxgbe(4): Fix per-queue netmap operation. Do not attempt to initialize netmap queues that are already initialized or aren't supposed to be initialized. Similarly, do not free queues that are not initialized or aren't supposed to be freed. PR: 217156 Sponsored by: Chelsio Communications
2017-06-15 19:56:59 +00:00
nm_txq->cntxt_id = INVALID_NM_TXQ_CNTXT_ID;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
snprintf(name, sizeof(name), "%d", idx);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
oid = SYSCTL_ADD_NODE(&vi->ctx, children, OID_AUTO, name, CTLFLAG_RD,
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
NULL, "netmap tx queue");
children = SYSCTL_CHILDREN(oid);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UINT(&vi->ctx, children, OID_AUTO, "cntxt_id", CTLFLAG_RD,
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
&nm_txq->cntxt_id, 0, "SGE context id of the queue");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_PROC(&vi->ctx, children, OID_AUTO, "cidx",
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
CTLTYPE_INT | CTLFLAG_RD, &nm_txq->cidx, 0, sysctl_uint16, "I",
"consumer index");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_PROC(&vi->ctx, children, OID_AUTO, "pidx",
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
CTLTYPE_INT | CTLFLAG_RD, &nm_txq->pidx, 0, sysctl_uint16, "I",
"producer index");
return (rc);
}
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
free_nm_txq(struct vi_info *vi, struct sge_nm_txq *nm_txq)
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
{
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct adapter *sc = vi->pi->adapter;
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
cxgbe(4): Fix some assertions during driver detach. The netmap queues can't be initialized if the VI isn't. MFC after: 3 days
2017-08-28 03:25:41 +00:00
if (vi->flags & VI_INIT_DONE)
MPASS(nm_txq->cntxt_id == INVALID_NM_TXQ_CNTXT_ID);
else
MPASS(nm_txq->cntxt_id == 0);
cxgbe(4): Fix per-queue netmap operation. Do not attempt to initialize netmap queues that are already initialized or aren't supposed to be initialized. Similarly, do not free queues that are not initialized or aren't supposed to be freed. PR: 217156 Sponsored by: Chelsio Communications
2017-06-15 19:56:59 +00:00
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards. Netmap gets its own hardware-assisted virtual interface and won't take over or disrupt the "normal" interface in any way. You can use both simultaneously. For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface (note the 'n' prefix) in the hardware to accompany each cxl<N> interface. These two ifnet's per port share the same wire but really are separate interfaces in the hardware and software. Each gets its own L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You should run netmap on the 'n' interfaces only, that's what they are for. With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now. Single port receive is at 33Mpps but this is very much a work in progress. I expect it to be closer to 40Mpps once done. In any case the current effort can already saturate multiple 10G ports of a T5 card at the smallest legal packet size. T4 gear is totally untested. trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef 881.952141 main [1621] interface is ncxl0 881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0 881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0 881.962540 main [1804] mapped 334980KB at 0x801dff000 Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus. 10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef) 881.962562 main [1882] Sending 512 packets every 0.000000000 s 881.962563 main [1884] Wait 2 secs for phy reset 884.088516 main [1886] Ready... 884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1 884.088607 sender_body [996] start 884.093246 sender_body [1064] drop copy 885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec) 886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec) 887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec) 888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec) 889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec) 890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec) 891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec) 892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec) 893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec) 894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec) 895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec) 896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec) ... Relnotes: Yes Sponsored by: Chelsio Communications.
2014-05-27 18:18:41 +00:00
free_ring(sc, nm_txq->desc_tag, nm_txq->desc_map, nm_txq->ba,
nm_txq->desc);
return (0);
}
#endif
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
ctrl_eq_alloc(struct adapter *sc, struct sge_eq *eq)
{
int rc, cntxt_id;
struct fw_eq_ctrl_cmd c;
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
int qsize = eq->sidx + sc->params.sge.spg_len / EQ_ESIZE;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
bzero(&c, sizeof(c));
c.op_to_vfn = htobe32(V_FW_CMD_OP(FW_EQ_CTRL_CMD) | F_FW_CMD_REQUEST |
F_FW_CMD_WRITE | F_FW_CMD_EXEC | V_FW_EQ_CTRL_CMD_PFN(sc->pf) |
V_FW_EQ_CTRL_CMD_VFN(0));
c.alloc_to_len16 = htobe32(F_FW_EQ_CTRL_CMD_ALLOC |
F_FW_EQ_CTRL_CMD_EQSTART | FW_LEN16(c));
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
c.cmpliqid_eqid = htonl(V_FW_EQ_CTRL_CMD_CMPLIQID(eq->iqid));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
c.physeqid_pkd = htobe32(0);
c.fetchszm_to_iqid =
cxgbe(4): Enable automatic cidx flush for all control queues. MFC after: 3 days
2017-01-09 22:20:09 +00:00
htobe32(V_FW_EQ_CTRL_CMD_HOSTFCMODE(X_HOSTFCMODE_STATUS_PAGE) |
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
V_FW_EQ_CTRL_CMD_PCIECHN(eq->tx_chan) |
F_FW_EQ_CTRL_CMD_FETCHRO | V_FW_EQ_CTRL_CMD_IQID(eq->iqid));
c.dcaen_to_eqsize =
htobe32(V_FW_EQ_CTRL_CMD_FBMIN(X_FETCHBURSTMIN_64B) |
V_FW_EQ_CTRL_CMD_FBMAX(X_FETCHBURSTMAX_512B) |
cxgbe(4): Enable automatic cidx flush for all control queues. MFC after: 3 days
2017-01-09 22:20:09 +00:00
V_FW_EQ_CTRL_CMD_CIDXFTHRESH(X_CIDXFLUSHTHRESH_32) |
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
V_FW_EQ_CTRL_CMD_EQSIZE(qsize));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
c.eqaddr = htobe64(eq->ba);
rc = -t4_wr_mbox(sc, sc->mbox, &c, sizeof(c), &c);
if (rc != 0) {
device_printf(sc->dev,
"failed to create control queue %d: %d\n", eq->tx_chan, rc);
return (rc);
}
eq->flags |= EQ_ALLOCATED;
eq->cntxt_id = G_FW_EQ_CTRL_CMD_EQID(be32toh(c.cmpliqid_eqid));
cntxt_id = eq->cntxt_id - sc->sge.eq_start;
if (cntxt_id >= sc->sge.neq)
panic("%s: eq->cntxt_id (%d) more than the max (%d)", __func__,
cntxt_id, sc->sge.neq - 1);
sc->sge.eqmap[cntxt_id] = eq;
return (rc);
}
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
eth_eq_alloc(struct adapter *sc, struct vi_info *vi, struct sge_eq *eq)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
{
int rc, cntxt_id;
struct fw_eq_eth_cmd c;
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
int qsize = eq->sidx + sc->params.sge.spg_len / EQ_ESIZE;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
bzero(&c, sizeof(c));
c.op_to_vfn = htobe32(V_FW_CMD_OP(FW_EQ_ETH_CMD) | F_FW_CMD_REQUEST |
F_FW_CMD_WRITE | F_FW_CMD_EXEC | V_FW_EQ_ETH_CMD_PFN(sc->pf) |
V_FW_EQ_ETH_CMD_VFN(0));
c.alloc_to_len16 = htobe32(F_FW_EQ_ETH_CMD_ALLOC |
F_FW_EQ_ETH_CMD_EQSTART | FW_LEN16(c));
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
c.autoequiqe_to_viid = htobe32(F_FW_EQ_ETH_CMD_AUTOEQUIQE |
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
F_FW_EQ_ETH_CMD_AUTOEQUEQE | V_FW_EQ_ETH_CMD_VIID(vi->viid));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
c.fetchszm_to_iqid =
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
htobe32(V_FW_EQ_ETH_CMD_HOSTFCMODE(X_HOSTFCMODE_NONE) |
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
V_FW_EQ_ETH_CMD_PCIECHN(eq->tx_chan) | F_FW_EQ_ETH_CMD_FETCHRO |
V_FW_EQ_ETH_CMD_IQID(eq->iqid));
c.dcaen_to_eqsize = htobe32(V_FW_EQ_ETH_CMD_FBMIN(X_FETCHBURSTMIN_64B) |
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
V_FW_EQ_ETH_CMD_FBMAX(X_FETCHBURSTMAX_512B) |
V_FW_EQ_ETH_CMD_EQSIZE(qsize));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
c.eqaddr = htobe64(eq->ba);
rc = -t4_wr_mbox(sc, sc->mbox, &c, sizeof(c), &c);
if (rc != 0) {
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
device_printf(vi->dev,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
"failed to create Ethernet egress queue: %d\n", rc);
return (rc);
}
eq->flags |= EQ_ALLOCATED;
eq->cntxt_id = G_FW_EQ_ETH_CMD_EQID(be32toh(c.eqid_pkd));
Track the base absolute ID of ingress and egress queues. Use this to map an absolute queue ID to a logical queue ID in interrupt handlers. For the regular cxgbe/cxl drivers this should be a no-op as the base absolute ID should be zero. VF devices have a non-zero base absolute ID and require this change. While here, export the absolute ID of egress queues via a sysctl. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7446
2016-08-09 17:49:42 +00:00
eq->abs_id = G_FW_EQ_ETH_CMD_PHYSEQID(be32toh(c.physeqid_pkd));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cntxt_id = eq->cntxt_id - sc->sge.eq_start;
if (cntxt_id >= sc->sge.neq)
panic("%s: eq->cntxt_id (%d) more than the max (%d)", __func__,
cntxt_id, sc->sge.neq - 1);
sc->sge.eqmap[cntxt_id] = eq;
return (rc);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
ofld_eq_alloc(struct adapter *sc, struct vi_info *vi, struct sge_eq *eq)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
{
int rc, cntxt_id;
struct fw_eq_ofld_cmd c;
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
int qsize = eq->sidx + sc->params.sge.spg_len / EQ_ESIZE;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
bzero(&c, sizeof(c));
c.op_to_vfn = htonl(V_FW_CMD_OP(FW_EQ_OFLD_CMD) | F_FW_CMD_REQUEST |
F_FW_CMD_WRITE | F_FW_CMD_EXEC | V_FW_EQ_OFLD_CMD_PFN(sc->pf) |
V_FW_EQ_OFLD_CMD_VFN(0));
c.alloc_to_len16 = htonl(F_FW_EQ_OFLD_CMD_ALLOC |
F_FW_EQ_OFLD_CMD_EQSTART | FW_LEN16(c));
c.fetchszm_to_iqid =
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
htonl(V_FW_EQ_OFLD_CMD_HOSTFCMODE(X_HOSTFCMODE_NONE) |
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
V_FW_EQ_OFLD_CMD_PCIECHN(eq->tx_chan) |
F_FW_EQ_OFLD_CMD_FETCHRO | V_FW_EQ_OFLD_CMD_IQID(eq->iqid));
c.dcaen_to_eqsize =
htobe32(V_FW_EQ_OFLD_CMD_FBMIN(X_FETCHBURSTMIN_64B) |
V_FW_EQ_OFLD_CMD_FBMAX(X_FETCHBURSTMAX_512B) |
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
V_FW_EQ_OFLD_CMD_EQSIZE(qsize));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
c.eqaddr = htobe64(eq->ba);
rc = -t4_wr_mbox(sc, sc->mbox, &c, sizeof(c), &c);
if (rc != 0) {
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
device_printf(vi->dev,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
"failed to create egress queue for TCP offload: %d\n", rc);
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->flags |= EQ_ALLOCATED;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->cntxt_id = G_FW_EQ_OFLD_CMD_EQID(be32toh(c.eqid_pkd));
cntxt_id = eq->cntxt_id - sc->sge.eq_start;
if (cntxt_id >= sc->sge.neq)
panic("%s: eq->cntxt_id (%d) more than the max (%d)", __func__,
cntxt_id, sc->sge.neq - 1);
sc->sge.eqmap[cntxt_id] = eq;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
alloc_eq(struct adapter *sc, struct vi_info *vi, struct sge_eq *eq)
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
int rc, qsize;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
size_t len;
mtx_init(&eq->eq_lock, eq->lockname, NULL, MTX_DEF);
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
qsize = eq->sidx + sc->params.sge.spg_len / EQ_ESIZE;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
len = qsize * EQ_ESIZE;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
rc = alloc_ring(sc, len, &eq->desc_tag, &eq->desc_map,
&eq->ba, (void **)&eq->desc);
if (rc)
return (rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->pidx = eq->cidx = 0;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
eq->equeqidx = eq->dbidx = 0;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
eq->doorbells = sc->doorbells;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
switch (eq->flags & EQ_TYPEMASK) {
case EQ_CTRL:
rc = ctrl_eq_alloc(sc, eq);
break;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
case EQ_ETH:
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
rc = eth_eq_alloc(sc, vi, eq);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
break;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
case EQ_OFLD:
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
rc = ofld_eq_alloc(sc, vi, eq);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
break;
#endif
default:
panic("%s: invalid eq type %d.", __func__,
eq->flags & EQ_TYPEMASK);
}
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
if (rc != 0) {
device_printf(sc->dev,
Add missing newline to an error message. MFC after: 3 days
2014-07-22 19:48:21 +00:00
"failed to allocate egress queue(%d): %d\n",
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->flags & EQ_TYPEMASK, rc);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
}
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
if (isset(&eq->doorbells, DOORBELL_UDB) ||
isset(&eq->doorbells, DOORBELL_UDBWC) ||
Cosmetic change (s/wrwc/wcwr/;s/WRWC/WCWR/). MFC after: 3 days.
2013-04-11 22:49:29 +00:00
isset(&eq->doorbells, DOORBELL_WCWR)) {
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
uint32_t s_qpp = sc->params.sge.eq_s_qpp;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
uint32_t mask = (1 << s_qpp) - 1;
volatile uint8_t *udb;
udb = sc->udbs_base + UDBS_DB_OFFSET;
udb += (eq->cntxt_id >> s_qpp) << PAGE_SHIFT; /* pg offset */
eq->udb_qid = eq->cntxt_id & mask; /* id in page */
cxgbe(4): Fix an off by one error when looking for the BAR2 doorbell address of an egress queue. MFC after: 2 weeks
2014-08-02 01:48:25 +00:00
if (eq->udb_qid >= PAGE_SIZE / UDBS_SEG_SIZE)
Cosmetic change (s/wrwc/wcwr/;s/WRWC/WCWR/). MFC after: 3 days.
2013-04-11 22:49:29 +00:00
clrbit(&eq->doorbells, DOORBELL_WCWR);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
else {
udb += eq->udb_qid << UDBS_SEG_SHIFT; /* seg offset */
eq->udb_qid = 0;
}
eq->udb = (volatile void *)udb;
}
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
return (rc);
}
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
free_eq(struct adapter *sc, struct sge_eq *eq)
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
{
int rc;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (eq->flags & EQ_ALLOCATED) {
switch (eq->flags & EQ_TYPEMASK) {
case EQ_CTRL:
rc = -t4_ctrl_eq_free(sc, sc->mbox, sc->pf, 0,
eq->cntxt_id);
break;
case EQ_ETH:
rc = -t4_eth_eq_free(sc, sc->mbox, sc->pf, 0,
eq->cntxt_id);
break;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
case EQ_OFLD:
rc = -t4_ofld_eq_free(sc, sc->mbox, sc->pf, 0,
eq->cntxt_id);
break;
#endif
default:
panic("%s: invalid eq type %d.", __func__,
eq->flags & EQ_TYPEMASK);
}
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
if (rc != 0) {
device_printf(sc->dev,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
"failed to free egress queue (%d): %d\n",
eq->flags & EQ_TYPEMASK, rc);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
return (rc);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->flags &= ~EQ_ALLOCATED;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
}
free_ring(sc, eq->desc_tag, eq->desc_map, eq->ba, eq->desc);
if (mtx_initialized(&eq->eq_lock))
mtx_destroy(&eq->eq_lock);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
bzero(eq, sizeof(*eq));
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
return (0);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
alloc_wrq(struct adapter *sc, struct vi_info *vi, struct sge_wrq *wrq,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid *oid)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct sysctl_ctx_list *ctx = vi ? &vi->ctx : &sc->ctx;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
rc = alloc_eq(sc, vi, &wrq->eq);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (rc)
return (rc);
wrq->adapter = sc;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
TASK_INIT(&wrq->wrq_tx_task, 0, wrq_tx_drain, wrq);
TAILQ_INIT(&wrq->incomplete_wrs);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
STAILQ_INIT(&wrq->wr_list);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
wrq->nwr_pending = 0;
wrq->ndesc_needed = 0;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): Make the location/length of all descriptor rings available in the sysctl MIB.
2016-09-23 20:03:28 +00:00
SYSCTL_ADD_UAUTO(ctx, children, OID_AUTO, "ba", CTLFLAG_RD,
&wrq->eq.ba, "bus address of descriptor ring");
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "dmalen", CTLFLAG_RD, NULL,
wrq->eq.sidx * EQ_ESIZE + sc->params.sge.spg_len,
"desc ring size in bytes");
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "cntxt_id", CTLFLAG_RD,
&wrq->eq.cntxt_id, 0, "SGE context id of the queue");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cidx",
CTLTYPE_INT | CTLFLAG_RD, &wrq->eq.cidx, 0, sysctl_uint16, "I",
"consumer index");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "pidx",
CTLTYPE_INT | CTLFLAG_RD, &wrq->eq.pidx, 0, sysctl_uint16, "I",
"producer index");
cxgbe(4): Make the location/length of all descriptor rings available in the sysctl MIB.
2016-09-23 20:03:28 +00:00
SYSCTL_ADD_INT(ctx, children, OID_AUTO, "sidx", CTLFLAG_RD, NULL,
wrq->eq.sidx, "status page index");
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
SYSCTL_ADD_UQUAD(ctx, children, OID_AUTO, "tx_wrs_direct", CTLFLAG_RD,
&wrq->tx_wrs_direct, "# of work requests (direct)");
SYSCTL_ADD_UQUAD(ctx, children, OID_AUTO, "tx_wrs_copied", CTLFLAG_RD,
&wrq->tx_wrs_copied, "# of work requests (copied)");
cxgbe(4): Fixes to wrq stats. - Increment tx_wrs_copied in the correct place. - Add tx_wrs_sspace to the sysctl MIB. Sponsored by: Chelsio Communications
2016-09-19 17:16:51 +00:00
SYSCTL_ADD_UQUAD(ctx, children, OID_AUTO, "tx_wrs_sspace", CTLFLAG_RD,
&wrq->tx_wrs_ss, "# of work requests (copied from scratch space)");
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (rc);
}
static int
free_wrq(struct adapter *sc, struct sge_wrq *wrq)
{
int rc;
rc = free_eq(sc, &wrq->eq);
if (rc)
return (rc);
bzero(wrq, sizeof(*wrq));
return (0);
}
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
alloc_txq(struct vi_info *vi, struct sge_txq *txq, int idx,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid *oid)
{
int rc;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct port_info *pi = vi->pi;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct adapter *sc = pi->adapter;
struct sge_eq *eq = &txq->eq;
char name[16];
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
rc = mp_ring_alloc(&txq->r, eq->sidx, txq, eth_tx, can_resume_eth_tx,
M_CXGBE, M_WAITOK);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0) {
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
device_printf(sc->dev, "failed to allocate mp_ring: %d\n", rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
rc = alloc_eq(sc, vi, eq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0) {
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
mp_ring_free(txq->r);
txq->r = NULL;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
/* Can't fail after this point. */
Track the base absolute ID of ingress and egress queues. Use this to map an absolute queue ID to a logical queue ID in interrupt handlers. For the regular cxgbe/cxl drivers this should be a no-op as the base absolute ID should be zero. VF devices have a non-zero base absolute ID and require this change. While here, export the absolute ID of egress queues via a sysctl. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7446
2016-08-09 17:49:42 +00:00
if (idx == 0)
sc->sge.eq_base = eq->abs_id - eq->cntxt_id;
else
KASSERT(eq->cntxt_id + sc->sge.eq_base == eq->abs_id,
("eq_base mismatch"));
KASSERT(sc->sge.eq_base == 0 || sc->flags & IS_VF,
("PF with non-zero eq_base"));
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
TASK_INIT(&txq->tx_reclaim_task, 0, tx_reclaim, eq);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
txq->ifp = vi->ifp;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
txq->gl = sglist_alloc(TX_SGL_SEGS, M_WAITOK);
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
if (sc->flags & IS_VF)
txq->cpl_ctrl0 = htobe32(V_TXPKT_OPCODE(CPL_TX_PKT_XT) |
V_TXPKT_INTF(pi->tx_chan));
else
txq->cpl_ctrl0 = htobe32(V_TXPKT_OPCODE(CPL_TX_PKT) |
cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields to use in tx work requests.
2016-09-15 08:30:47 +00:00
V_TXPKT_INTF(pi->tx_chan) |
V_TXPKT_PF(G_FW_VIID_PFN(vi->viid)) |
V_TXPKT_VF(G_FW_VIID_VIN(vi->viid)) |
V_TXPKT_VF_VLD(G_FW_VIID_VIVLD(vi->viid)));
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
txq->tc_idx = -1;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
txq->sdesc = malloc(eq->sidx * sizeof(struct tx_sdesc), M_CXGBE,
M_ZERO | M_WAITOK);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
snprintf(name, sizeof(name), "%d", idx);
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
oid = SYSCTL_ADD_NODE(&vi->ctx, children, OID_AUTO, name, CTLFLAG_RD,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
NULL, "tx queue");
children = SYSCTL_CHILDREN(oid);
cxgbe(4): Make the location/length of all descriptor rings available in the sysctl MIB.
2016-09-23 20:03:28 +00:00
SYSCTL_ADD_UAUTO(&vi->ctx, children, OID_AUTO, "ba", CTLFLAG_RD,
&eq->ba, "bus address of descriptor ring");
SYSCTL_ADD_INT(&vi->ctx, children, OID_AUTO, "dmalen", CTLFLAG_RD, NULL,
eq->sidx * EQ_ESIZE + sc->params.sge.spg_len,
"desc ring size in bytes");
Track the base absolute ID of ingress and egress queues. Use this to map an absolute queue ID to a logical queue ID in interrupt handlers. For the regular cxgbe/cxl drivers this should be a no-op as the base absolute ID should be zero. VF devices have a non-zero base absolute ID and require this change. While here, export the absolute ID of egress queues via a sysctl. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7446
2016-08-09 17:49:42 +00:00
SYSCTL_ADD_UINT(&vi->ctx, children, OID_AUTO, "abs_id", CTLFLAG_RD,
&eq->abs_id, 0, "absolute id of the queue");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UINT(&vi->ctx, children, OID_AUTO, "cntxt_id", CTLFLAG_RD,
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
&eq->cntxt_id, 0, "SGE context id of the queue");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_PROC(&vi->ctx, children, OID_AUTO, "cidx",
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
CTLTYPE_INT | CTLFLAG_RD, &eq->cidx, 0, sysctl_uint16, "I",
"consumer index");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_PROC(&vi->ctx, children, OID_AUTO, "pidx",
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
CTLTYPE_INT | CTLFLAG_RD, &eq->pidx, 0, sysctl_uint16, "I",
"producer index");
cxgbe(4): Make the location/length of all descriptor rings available in the sysctl MIB.
2016-09-23 20:03:28 +00:00
SYSCTL_ADD_INT(&vi->ctx, children, OID_AUTO, "sidx", CTLFLAG_RD, NULL,
eq->sidx, "status page index");
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
SYSCTL_ADD_PROC(&vi->ctx, children, OID_AUTO, "tc",
CTLTYPE_INT | CTLFLAG_RW, vi, idx, sysctl_tc, "I",
"traffic class (-1 means none)");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UQUAD(&vi->ctx, children, OID_AUTO, "txcsum", CTLFLAG_RD,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
&txq->txcsum, "# of times hardware assisted with checksum");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UQUAD(&vi->ctx, children, OID_AUTO, "vlan_insertion",
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
CTLFLAG_RD, &txq->vlan_insertion,
"# of times hardware inserted 802.1Q tag");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UQUAD(&vi->ctx, children, OID_AUTO, "tso_wrs", CTLFLAG_RD,
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
&txq->tso_wrs, "# of TSO work requests");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UQUAD(&vi->ctx, children, OID_AUTO, "imm_wrs", CTLFLAG_RD,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
&txq->imm_wrs, "# of work requests with immediate data");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UQUAD(&vi->ctx, children, OID_AUTO, "sgl_wrs", CTLFLAG_RD,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
&txq->sgl_wrs, "# of work requests with direct SGL");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UQUAD(&vi->ctx, children, OID_AUTO, "txpkt_wrs", CTLFLAG_RD,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
&txq->txpkt_wrs, "# of txpkt work requests (one pkt/WR)");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UQUAD(&vi->ctx, children, OID_AUTO, "txpkts0_wrs",
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
CTLFLAG_RD, &txq->txpkts0_wrs,
"# of txpkts (type 0) work requests");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UQUAD(&vi->ctx, children, OID_AUTO, "txpkts1_wrs",
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
CTLFLAG_RD, &txq->txpkts1_wrs,
"# of txpkts (type 1) work requests");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UQUAD(&vi->ctx, children, OID_AUTO, "txpkts0_pkts",
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
CTLFLAG_RD, &txq->txpkts0_pkts,
"# of frames tx'd using type0 txpkts work requests");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_UQUAD(&vi->ctx, children, OID_AUTO, "txpkts1_pkts",
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
CTLFLAG_RD, &txq->txpkts1_pkts,
"# of frames tx'd using type1 txpkts work requests");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_COUNTER_U64(&vi->ctx, children, OID_AUTO, "r_enqueues",
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
CTLFLAG_RD, &txq->r->enqueues,
"# of enqueues to the mp_ring for this queue");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_COUNTER_U64(&vi->ctx, children, OID_AUTO, "r_drops",
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
CTLFLAG_RD, &txq->r->drops,
"# of drops in the mp_ring for this queue");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_COUNTER_U64(&vi->ctx, children, OID_AUTO, "r_starts",
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
CTLFLAG_RD, &txq->r->starts,
"# of normal consumer starts in the mp_ring for this queue");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_COUNTER_U64(&vi->ctx, children, OID_AUTO, "r_stalls",
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
CTLFLAG_RD, &txq->r->stalls,
"# of consumer stalls in the mp_ring for this queue");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_COUNTER_U64(&vi->ctx, children, OID_AUTO, "r_restarts",
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
CTLFLAG_RD, &txq->r->restarts,
"# of consumer restarts in the mp_ring for this queue");
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
SYSCTL_ADD_COUNTER_U64(&vi->ctx, children, OID_AUTO, "r_abdications",
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
CTLFLAG_RD, &txq->r->abdications,
"# of consumer abdications in the mp_ring for this queue");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static int
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
free_txq(struct vi_info *vi, struct sge_txq *txq)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
int rc;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
struct adapter *sc = vi->pi->adapter;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct sge_eq *eq = &txq->eq;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = free_eq(sc, eq);
if (rc)
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
sglist_free(txq->gl);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
free(txq->sdesc, M_CXGBE);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
mp_ring_free(txq->r);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
bzero(txq, sizeof(*txq));
return (0);
}
static void
oneseg_dma_callback(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
bus_addr_t *ba = arg;
KASSERT(nseg == 1,
("%s meant for single segment mappings only.", __func__));
*ba = error ? 0 : segs->ds_addr;
}
static inline void
ring_fl_db(struct adapter *sc, struct sge_fl *fl)
{
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
uint32_t n, v;
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
n = IDXDIFF(fl->pidx / 8, fl->dbidx, fl->sidx);
MPASS(n > 0);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
wmb();
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
v = fl->dbval | V_PIDX(n);
if (fl->udb)
*fl->udb = htole32(v);
else
Store the offset of the KDOORBELL and GTS registers in the softc. VF devices use a different register layout than PF devices. Storing the offset in a value in the softc allows code to be shared between the PF and VF drivers. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7389
2016-08-01 22:39:51 +00:00
t4_write_reg(sc, sc->sge_kdoorbell_reg, v);
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
IDXINCR(fl->dbidx, n, fl->sidx);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
/*
sys/dev: minor spelling fixes. Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
* Fills up the freelist by allocating up to 'n' buffers. Buffers that are
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
* recycled do not count towards this allocation budget.
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
*
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
* Returns non-zero to indicate that this freelist should be added to the list
* of starving freelists.
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
refill_fl(struct adapter *sc, struct sge_fl *fl, int n)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
__be64 *d;
struct fl_sdesc *sd;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
uintptr_t pa;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
caddr_t cl;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
struct cluster_layout *cll;
struct sw_zone_info *swz;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
struct cluster_metadata *clm;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
uint16_t max_pidx;
uint16_t hw_cidx = fl->hw_cidx; /* stable snapshot */
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
FL_LOCK_ASSERT_OWNED(fl);
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
/*
sys/dev: minor spelling fixes. Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
* We always stop at the beginning of the hardware descriptor that's just
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
* before the one with the hw cidx. This is to avoid hw pidx = hw cidx,
* which would mean an empty freelist to the chip.
*/
max_pidx = __predict_false(hw_cidx == 0) ? fl->sidx - 1 : hw_cidx - 1;
if (fl->pidx == max_pidx * 8)
return (0);
d = &fl->desc[fl->pidx];
sd = &fl->sdesc[fl->pidx];
cll = &fl->cll_def; /* default layout */
swz = &sc->sge.sw_zone_info[cll->zidx];
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
while (n > 0) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (sd->cl != NULL) {
Simplify r267600, there's no need to distinguish between allocated and inlined mbufs. MFC after: 1 week
2014-07-22 02:02:39 +00:00
if (sd->nmbuf == 0) {
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
/*
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
* Fast recycle without involving any atomics on
* the cluster's metadata (if the cluster has
* metadata). This happens when all frames
* received in the cluster were small enough to
* fit within a single mbuf each.
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
*/
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
fl->cl_fast_recycled++;
cxgbe(4): Fix bug in the fast rx buffer recycle path. In some cases rx buffers were getting recycled when they should have been left alone. MFC after: 3 days
2014-06-18 00:16:35 +00:00
#ifdef INVARIANTS
clm = cl_metadata(sc, fl, &sd->cll, sd->cl);
if (clm != NULL)
MPASS(clm->refcount == 1);
#endif
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
goto recycled_fast;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
* Cluster is guaranteed to have metadata. Clusters
* without metadata always take the fast recycle path
* when they're recycled.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
clm = cl_metadata(sc, fl, &sd->cll, sd->cl);
MPASS(clm != NULL);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if (atomic_fetchadd_int(&clm->refcount, -1) == 1) {
fl->cl_recycled++;
cxgbe(4): Keep track of the clusters that have to be freed by the custom free routine (rxb_free) in the driver. Fail MOD_UNLOAD with EBUSY if any such cluster has been handed up to the kernel but hasn't been freed yet. This prevents a panic later when the cluster finally needs to be freed but rxb_free is gone from the kernel. MFC after: 1 week
2014-07-23 22:29:22 +00:00
counter_u64_add(extfree_rels, 1);
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
goto recycled;
}
sd->cl = NULL; /* gave up my reference */
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
MPASS(sd->cl == NULL);
alloc:
cl = uma_zalloc(swz->zone, M_NOWAIT);
if (__predict_false(cl == NULL)) {
if (cll == &fl->cll_alt || fl->cll_alt.zidx == -1 ||
fl->cll_def.zidx == fl->cll_alt.zidx)
break;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/* fall back to the safe zone */
cll = &fl->cll_alt;
swz = &sc->sge.sw_zone_info[cll->zidx];
goto alloc;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
fl->cl_allocated++;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
n--;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
pa = pmap_kextract((vm_offset_t)cl);
pa += cll->region1;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
sd->cl = cl;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
sd->cll = *cll;
*d = htobe64(pa | cll->hwidx);
clm = cl_metadata(sc, fl, cll, cl);
if (clm != NULL) {
recycled:
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#ifdef INVARIANTS
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
clm->sd = sd;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#endif
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
clm->refcount = 1;
}
Simplify r267600, there's no need to distinguish between allocated and inlined mbufs. MFC after: 1 week
2014-07-22 02:02:39 +00:00
sd->nmbuf = 0;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
recycled_fast:
d++;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
sd++;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
if (__predict_false(++fl->pidx % 8 == 0)) {
uint16_t pidx = fl->pidx / 8;
if (__predict_false(pidx == fl->sidx)) {
fl->pidx = 0;
pidx = 0;
sd = fl->sdesc;
d = fl->desc;
}
if (pidx == max_pidx)
break;
if (IDXDIFF(pidx, fl->dbidx, fl->sidx) >= 4)
ring_fl_db(sc, fl);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
}
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
if (fl->pidx / 8 != fl->dbidx)
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
ring_fl_db(sc, fl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (FL_RUNNING_LOW(fl) && !(fl->flags & FL_STARVING));
}
/*
* Attempt to refill all starving freelists.
*/
static void
refill_sfl(void *arg)
{
struct adapter *sc = arg;
struct sge_fl *fl, *fl_temp;
Add support for configuring additional virtual interfaces (VIs) on a port. Each virtual interface has its own MAC address, queues, and statistics. The dedicated netmap interfaces (ncxgbeX / ncxlX) were already implemented as additional VIs on each port. This change allows additional non-netmap interfaces to be configured on each port. Additional virtual interfaces use the naming scheme vcxgbeX or vcxlX. Additional VIs are enabled by setting the hw.cxgbe.num_vis tunable to a value greater than 1 before loading the cxgbe(4) or cxl(4) driver. NB: The first VI on each port is the "main" interface (cxgbeX or cxlX). T4/T5 NICs provide a limited number of MAC addresses for each physical port. As a result, a maximum of six VIs can be configured on each port (including the "main" interface and the netmap interface when netmap is enabled). One user-visible result is that when netmap is enabled, packets received or transmitted via the netmap interface are no longer counted in the stats for the "main" interface, but are not accounted to the netmap interface. The netmap interfaces now also have a new-bus device and export various information sysctl nodes via dev.n(cxgbe|cxl).X. The cxgbetool 'clearstats' command clears the stats for all VIs on the specified port along with the port's stats. There is currently no way to clear the stats of an individual VI. Reviewed by: np MFC after: 1 month Sponsored by: Chelsio
2015-12-03 00:02:01 +00:00
mtx_assert(&sc->sfl_lock, MA_OWNED);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
TAILQ_FOREACH_SAFE(fl, &sc->sfl, link, fl_temp) {
FL_LOCK(fl);
refill_fl(sc, fl, 64);
if (FL_NOT_RUNNING_LOW(fl) || fl->flags & FL_DOOMED) {
TAILQ_REMOVE(&sc->sfl, fl, link);
fl->flags &= ~FL_STARVING;
}
FL_UNLOCK(fl);
}
if (!TAILQ_EMPTY(&sc->sfl))
callout_schedule(&sc->sfl_callout, hz / 5);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static int
alloc_fl_sdesc(struct sge_fl *fl)
{
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
fl->sdesc = malloc(fl->sidx * 8 * sizeof(struct fl_sdesc), M_CXGBE,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
M_ZERO | M_WAITOK);
return (0);
}
static void
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
free_fl_sdesc(struct adapter *sc, struct sge_fl *fl)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
struct fl_sdesc *sd;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
struct cluster_metadata *clm;
struct cluster_layout *cll;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
int i;
sd = fl->sdesc;
cxgbe(4): some optimizations in freelist handling. MFC after: 2 weeks.
2014-08-02 06:55:36 +00:00
for (i = 0; i < fl->sidx * 8; i++, sd++) {
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if (sd->cl == NULL)
continue;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
cll = &sd->cll;
clm = cl_metadata(sc, fl, cll, sd->cl);
cxgbe(4): Keep track of the clusters that have to be freed by the custom free routine (rxb_free) in the driver. Fail MOD_UNLOAD with EBUSY if any such cluster has been handed up to the kernel but hasn't been freed yet. This prevents a panic later when the cluster finally needs to be freed but rxb_free is gone from the kernel. MFC after: 1 week
2014-07-23 22:29:22 +00:00
if (sd->nmbuf == 0)
uma_zfree(sc->sge.sw_zone_info[cll->zidx].zone, sd->cl);
else if (clm && atomic_fetchadd_int(&clm->refcount, -1) == 1) {
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
uma_zfree(sc->sge.sw_zone_info[cll->zidx].zone, sd->cl);
cxgbe(4): Keep track of the clusters that have to be freed by the custom free routine (rxb_free) in the driver. Fail MOD_UNLOAD with EBUSY if any such cluster has been handed up to the kernel but hasn't been freed yet. This prevents a panic later when the cluster finally needs to be freed but rxb_free is gone from the kernel. MFC after: 1 week
2014-07-23 22:29:22 +00:00
counter_u64_add(extfree_rels, 1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
sd->cl = NULL;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
free(fl->sdesc, M_CXGBE);
fl->sdesc = NULL;
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline void
get_pkt_gl(struct mbuf *m, struct sglist *gl)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
int rc;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
M_ASSERTPKTHDR(m);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
sglist_reset(gl);
rc = sglist_append_mbuf(gl, m);
if (__predict_false(rc != 0)) {
panic("%s: mbuf %p (%d segs) was vetted earlier but now fails "
"with %d.", __func__, m, mbuf_nsegs(m), rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
KASSERT(gl->sg_nseg == mbuf_nsegs(m),
("%s: nsegs changed for mbuf %p from %d to %d", __func__, m,
mbuf_nsegs(m), gl->sg_nseg));
KASSERT(gl->sg_nseg > 0 &&
gl->sg_nseg <= (needs_tso(m) ? TX_SGL_SEGS_TSO : TX_SGL_SEGS),
("%s: %d segments, should have been 1 <= nsegs <= %d", __func__,
gl->sg_nseg, needs_tso(m) ? TX_SGL_SEGS_TSO : TX_SGL_SEGS));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
/*
* len16 for a txpkt WR with a GL. Includes the firmware work request header.
*/
static inline u_int
txpkt_len16(u_int nsegs, u_int tso)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
u_int n;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS(nsegs > 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
nsegs--; /* first segment is part of ulptx_sgl */
n = sizeof(struct fw_eth_tx_pkt_wr) + sizeof(struct cpl_tx_pkt_core) +
sizeof(struct ulptx_sgl) + 8 * ((3 * nsegs) / 2 + (nsegs & 1));
if (tso)
n += sizeof(struct cpl_tx_pkt_lso_core);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (howmany(n, 16));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
/*
* len16 for a txpkt_vm WR with a GL. Includes the firmware work
* request header.
*/
static inline u_int
txpkt_vm_len16(u_int nsegs, u_int tso)
{
u_int n;
MPASS(nsegs > 0);
nsegs--; /* first segment is part of ulptx_sgl */
n = sizeof(struct fw_eth_tx_pkt_vm_wr) +
sizeof(struct cpl_tx_pkt_core) +
sizeof(struct ulptx_sgl) + 8 * ((3 * nsegs) / 2 + (nsegs & 1));
if (tso)
n += sizeof(struct cpl_tx_pkt_lso_core);
return (howmany(n, 16));
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
* len16 for a txpkts type 0 WR with a GL. Does not include the firmware work
* request header.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline u_int
txpkts0_len16(u_int nsegs)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
u_int n;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS(nsegs > 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
nsegs--; /* first segment is part of ulptx_sgl */
n = sizeof(struct ulp_txpkt) + sizeof(struct ulptx_idata) +
sizeof(struct cpl_tx_pkt_core) + sizeof(struct ulptx_sgl) +
8 * ((3 * nsegs) / 2 + (nsegs & 1));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (howmany(n, 16));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
/*
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
* len16 for a txpkts type 1 WR with a GL. Does not include the firmware work
* request header.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline u_int
txpkts1_len16(void)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
u_int n;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
n = sizeof(struct cpl_tx_pkt_core) + sizeof(struct ulptx_sgl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (howmany(n, 16));
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline u_int
imm_payload(u_int ndesc)
{
u_int n;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
n = ndesc * EQ_ESIZE - sizeof(struct fw_eth_tx_pkt_wr) -
sizeof(struct cpl_tx_pkt_core);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (n);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
/*
* Write a VM txpkt WR for this packet to the hardware descriptors, update the
* software descriptor, and advance the pidx. It is guaranteed that enough
* descriptors are available.
*
* The return value is the # of hardware descriptors used.
*/
static u_int
cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. Sponsored by: Chelsio Communications
2016-09-11 16:11:51 +00:00
write_txpkt_vm_wr(struct adapter *sc, struct sge_txq *txq,
struct fw_eth_tx_pkt_vm_wr *wr, struct mbuf *m0, u_int available)
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
{
struct sge_eq *eq = &txq->eq;
struct tx_sdesc *txsd;
struct cpl_tx_pkt_core *cpl;
uint32_t ctrl; /* used in many unrelated places */
uint64_t ctrl1;
int csum_type, len16, ndesc, pktlen, nsegs;
caddr_t dst;
TXQ_LOCK_ASSERT_OWNED(txq);
M_ASSERTPKTHDR(m0);
MPASS(available > 0 && available < eq->sidx);
len16 = mbuf_len16(m0);
nsegs = mbuf_nsegs(m0);
pktlen = m0->m_pkthdr.len;
ctrl = sizeof(struct cpl_tx_pkt_core);
if (needs_tso(m0))
ctrl += sizeof(struct cpl_tx_pkt_lso_core);
ndesc = howmany(len16, EQ_ESIZE / 16);
MPASS(ndesc <= available);
/* Firmware work request header */
MPASS(wr == (void *)&eq->desc[eq->pidx]);
wr->op_immdlen = htobe32(V_FW_WR_OP(FW_ETH_TX_PKT_VM_WR) |
V_FW_ETH_TX_PKT_WR_IMMDLEN(ctrl));
ctrl = V_FW_WR_LEN16(len16);
wr->equiq_to_len16 = htobe32(ctrl);
wr->r3[0] = 0;
wr->r3[1] = 0;
/*
* Copy over ethmacdst, ethmacsrc, ethtype, and vlantci.
* vlantci is ignored unless the ethtype is 0x8100, so it's
* simpler to always copy it rather than making it
* conditional. Also, it seems that we do not have to set
* vlantci or fake the ethtype when doing VLAN tag insertion.
*/
m_copydata(m0, 0, sizeof(struct ether_header) + 2, wr->ethmacdst);
csum_type = -1;
if (needs_tso(m0)) {
struct cpl_tx_pkt_lso_core *lso = (void *)(wr + 1);
KASSERT(m0->m_pkthdr.l2hlen > 0 && m0->m_pkthdr.l3hlen > 0 &&
m0->m_pkthdr.l4hlen > 0,
("%s: mbuf %p needs TSO but missing header lengths",
__func__, m0));
ctrl = V_LSO_OPCODE(CPL_TX_PKT_LSO) | F_LSO_FIRST_SLICE |
F_LSO_LAST_SLICE | V_LSO_IPHDR_LEN(m0->m_pkthdr.l3hlen >> 2)
| V_LSO_TCPHDR_LEN(m0->m_pkthdr.l4hlen >> 2);
if (m0->m_pkthdr.l2hlen == sizeof(struct ether_vlan_header))
ctrl |= V_LSO_ETHHDR_LEN(1);
if (m0->m_pkthdr.l3hlen == sizeof(struct ip6_hdr))
ctrl |= F_LSO_IPV6;
lso->lso_ctrl = htobe32(ctrl);
lso->ipid_ofst = htobe16(0);
lso->mss = htobe16(m0->m_pkthdr.tso_segsz);
lso->seqno_offset = htobe32(0);
lso->len = htobe32(pktlen);
if (m0->m_pkthdr.l3hlen == sizeof(struct ip6_hdr))
csum_type = TX_CSUM_TCPIP6;
else
csum_type = TX_CSUM_TCPIP;
cpl = (void *)(lso + 1);
txq->tso_wrs++;
} else {
if (m0->m_pkthdr.csum_flags & CSUM_IP_TCP)
csum_type = TX_CSUM_TCPIP;
else if (m0->m_pkthdr.csum_flags & CSUM_IP_UDP)
csum_type = TX_CSUM_UDPIP;
else if (m0->m_pkthdr.csum_flags & CSUM_IP6_TCP)
csum_type = TX_CSUM_TCPIP6;
else if (m0->m_pkthdr.csum_flags & CSUM_IP6_UDP)
csum_type = TX_CSUM_UDPIP6;
#if defined(INET)
else if (m0->m_pkthdr.csum_flags & CSUM_IP) {
/*
* XXX: The firmware appears to stomp on the
* fragment/flags field of the IP header when
* using TX_CSUM_IP. Fall back to doing
* software checksums.
*/
u_short *sump;
struct mbuf *m;
int offset;
m = m0;
offset = 0;
sump = m_advance(&m, &offset, m0->m_pkthdr.l2hlen +
offsetof(struct ip, ip_sum));
*sump = in_cksum_skip(m0, m0->m_pkthdr.l2hlen +
m0->m_pkthdr.l3hlen, m0->m_pkthdr.l2hlen);
m0->m_pkthdr.csum_flags &= ~CSUM_IP;
}
#endif
cpl = (void *)(wr + 1);
}
/* Checksum offload */
ctrl1 = 0;
if (needs_l3_csum(m0) == 0)
ctrl1 |= F_TXPKT_IPCSUM_DIS;
if (csum_type >= 0) {
KASSERT(m0->m_pkthdr.l2hlen > 0 && m0->m_pkthdr.l3hlen > 0,
("%s: mbuf %p needs checksum offload but missing header lengths",
__func__, m0));
cxgbe(4): Use correct macro for header length with T6 ASICs. This affects the transmit of the VF driver only. Sponsored by: Chelsio Communications
2016-09-11 16:11:51 +00:00
if (chip_id(sc) <= CHELSIO_T5) {
ctrl1 |= V_TXPKT_ETHHDR_LEN(m0->m_pkthdr.l2hlen -
ETHER_HDR_LEN);
} else {
ctrl1 |= V_T6_TXPKT_ETHHDR_LEN(m0->m_pkthdr.l2hlen -
ETHER_HDR_LEN);
}
Chelsio T4/T5 VF driver. The cxgbev/cxlv driver supports Virtual Function devices for Chelsio T4 and T4 adapters. The VF devices share most of their code with the existing PF4 driver (cxgbe/cxl) and as such the VF device driver currently depends on the PF4 driver. Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf PCI device driver that attaches to the VF device. It then creates child cxgbev/cxlv devices representing ports assigned to the VF. By default, the PF driver assigns a single port to each VF. t4vf_hw.c contains VF-specific routines from the shared code used to fetch VF-specific parameters from the firmware. t4_vf.c contains the VF-specific PCI device driver and includes its own attach routine. VF devices are required to use a different firmware request when transmitting packets (which in turn requires a different CPL message to encapsulate messages). This alternate firmware request does not permit chaining multiple packets in a single message, so each packet results in a firmware request. In addition, the different CPL message requires more detailed information when enabling hardware checksums, so parse_pkt() on VF devices must examine L2 and L3 headers for all packets (not just TSO packets) for VF devices. Finally, L2 checksums on non-UDP/non-TCP packets do not work reliably (the firmware trashes the IPv4 fragment field), so IPv4 checksums for such packets are calculated in software. Most of the other changes in the non-VF-specific code are to expose various variables and functions private to the PF driver so that they can be used by the VF driver. Note that a limited subset of cxgbetool functions are supported on VF devices including register dumps, scheduler classes, and clearing of statistics. In addition, TOE is not supported on VF devices, only for the PF interfaces. Reviewed by: np MFC after: 2 months Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7599
2016-09-07 18:13:57 +00:00
ctrl1 |= V_TXPKT_IPHDR_LEN(m0->m_pkthdr.l3hlen);
ctrl1 |= V_TXPKT_CSUM_TYPE(csum_type);
} else
ctrl1 |= F_TXPKT_L4CSUM_DIS;
if (m0->m_pkthdr.csum_flags & (CSUM_IP | CSUM_TCP | CSUM_UDP |
CSUM_UDP_IPV6 | CSUM_TCP_IPV6 | CSUM_TSO))
txq->txcsum++; /* some hardware assistance provided */
/* VLAN tag insertion */
if (needs_vlan_insertion(m0)) {
ctrl1 |= F_TXPKT_VLAN_VLD |
V_TXPKT_VLAN(m0->m_pkthdr.ether_vtag);
txq->vlan_insertion++;
}
/* CPL header */
cpl->ctrl0 = txq->cpl_ctrl0;
cpl->pack = 0;
cpl->len = htobe16(pktlen);
cpl->ctrl1 = htobe64(ctrl1);
/* SGL */
dst = (void *)(cpl + 1);
/*
* A packet using TSO will use up an entire descriptor for the
* firmware work request header, LSO CPL, and TX_PKT_XT CPL.
* If this descriptor is the last descriptor in the ring, wrap
* around to the front of the ring explicitly for the start of
* the sgl.
*/
if (dst == (void *)&eq->desc[eq->sidx]) {
dst = (void *)&eq->desc[0];
write_gl_to_txd(txq, m0, &dst, 0);
} else
write_gl_to_txd(txq, m0, &dst, eq->sidx - ndesc < eq->pidx);
txq->sgl_wrs++;
txq->txpkt_wrs++;
txsd = &txq->sdesc[eq->pidx];
txsd->m = m0;
txsd->desc_used = ndesc;
return (ndesc);
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
/*
* Write a txpkt WR for this packet to the hardware descriptors, update the
* software descriptor, and advance the pidx. It is guaranteed that enough
* descriptors are available.
*
* The return value is the # of hardware descriptors used.
*/
static u_int
write_txpkt_wr(struct sge_txq *txq, struct fw_eth_tx_pkt_wr *wr,
struct mbuf *m0, u_int available)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
struct sge_eq *eq = &txq->eq;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
struct tx_sdesc *txsd;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct cpl_tx_pkt_core *cpl;
uint32_t ctrl; /* used in many unrelated places */
uint64_t ctrl1;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
int len16, ndesc, pktlen, nsegs;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
caddr_t dst;
TXQ_LOCK_ASSERT_OWNED(txq);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
M_ASSERTPKTHDR(m0);
MPASS(available > 0 && available < eq->sidx);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
len16 = mbuf_len16(m0);
nsegs = mbuf_nsegs(m0);
pktlen = m0->m_pkthdr.len;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ctrl = sizeof(struct cpl_tx_pkt_core);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (needs_tso(m0))
cxgbe(4): update to firmware interface 1.5.2.0; updates to shared code.
2012-06-22 07:51:15 +00:00
ctrl += sizeof(struct cpl_tx_pkt_lso_core);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
else if (pktlen <= imm_payload(2) && available >= 2) {
/* Immediate data. Recalculate len16 and set nsegs to 0. */
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
ctrl += pktlen;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
len16 = howmany(sizeof(struct fw_eth_tx_pkt_wr) +
sizeof(struct cpl_tx_pkt_core) + pktlen, 16);
nsegs = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
ndesc = howmany(len16, EQ_ESIZE / 16);
MPASS(ndesc <= available);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* Firmware work request header */
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS(wr == (void *)&eq->desc[eq->pidx]);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
wr->op_immdlen = htobe32(V_FW_WR_OP(FW_ETH_TX_PKT_WR) |
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
V_FW_ETH_TX_PKT_WR_IMMDLEN(ctrl));
There is no need to request a tx credit flush if such a request is already pending. MFC after: 3 days
2011-04-14 20:06:23 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
ctrl = V_FW_WR_LEN16(len16);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
wr->equiq_to_len16 = htobe32(ctrl);
wr->r3 = 0;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (needs_tso(m0)) {
cxgbe(4): update to firmware interface 1.5.2.0; updates to shared code.
2012-06-22 07:51:15 +00:00
struct cpl_tx_pkt_lso_core *lso = (void *)(wr + 1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
KASSERT(m0->m_pkthdr.l2hlen > 0 && m0->m_pkthdr.l3hlen > 0 &&
m0->m_pkthdr.l4hlen > 0,
("%s: mbuf %p needs TSO but missing header lengths",
__func__, m0));
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
ctrl = V_LSO_OPCODE(CPL_TX_PKT_LSO) | F_LSO_FIRST_SLICE |
F_LSO_LAST_SLICE | V_LSO_IPHDR_LEN(m0->m_pkthdr.l3hlen >> 2)
| V_LSO_TCPHDR_LEN(m0->m_pkthdr.l4hlen >> 2);
if (m0->m_pkthdr.l2hlen == sizeof(struct ether_vlan_header))
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ctrl |= V_LSO_ETHHDR_LEN(1);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (m0->m_pkthdr.l3hlen == sizeof(struct ip6_hdr))
cxgbe(4): support for IPv6 TSO and LRO. Submitted by: bz (this is a modified version of that patch)
2012-06-29 19:51:06 +00:00
ctrl |= F_LSO_IPV6;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
lso->lso_ctrl = htobe32(ctrl);
lso->ipid_ofst = htobe16(0);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
lso->mss = htobe16(m0->m_pkthdr.tso_segsz);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
lso->seqno_offset = htobe32(0);
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
lso->len = htobe32(pktlen);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cpl = (void *)(lso + 1);
txq->tso_wrs++;
} else
cpl = (void *)(wr + 1);
/* Checksum offload */
ctrl1 = 0;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (needs_l3_csum(m0) == 0)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ctrl1 |= F_TXPKT_IPCSUM_DIS;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (needs_l4_csum(m0) == 0)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ctrl1 |= F_TXPKT_L4CSUM_DIS;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (m0->m_pkthdr.csum_flags & (CSUM_IP | CSUM_TCP | CSUM_UDP |
cxgbe(4): Assume that CSUM_TSO in the transmit path implies CSUM_IP and CSUM_TCP too. They are all set explicitly by the kernel usually. While here, fix an unrelated bug where hardware L4 checksum calculation was accidentally disabled for some IPv6 packets. Reported by: alfred@ MFC after: 3 days
2013-02-20 23:15:40 +00:00
CSUM_UDP_IPV6 | CSUM_TCP_IPV6 | CSUM_TSO))
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
txq->txcsum++; /* some hardware assistance provided */
/* VLAN tag insertion */
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (needs_vlan_insertion(m0)) {
ctrl1 |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(m0->m_pkthdr.ether_vtag);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
txq->vlan_insertion++;
}
/* CPL header */
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
cpl->ctrl0 = txq->cpl_ctrl0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cpl->pack = 0;
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
cpl->len = htobe16(pktlen);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cpl->ctrl1 = htobe64(ctrl1);
/* SGL */
dst = (void *)(cpl + 1);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (nsegs > 0) {
write_gl_to_txd(txq, m0, &dst, eq->sidx - ndesc < eq->pidx);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
txq->sgl_wrs++;
} else {
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
struct mbuf *m;
for (m = m0; m != NULL; m = m->m_next) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
copy_to_txd(eq, mtod(m, caddr_t), &dst, m->m_len);
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
#ifdef INVARIANTS
pktlen -= m->m_len;
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
#ifdef INVARIANTS
KASSERT(pktlen == 0, ("%s: %d bytes left.", __func__, pktlen));
#endif
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
txq->imm_wrs++;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
txq->txpkt_wrs++;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
txsd = &txq->sdesc[eq->pidx];
txsd->m = m0;
txsd->desc_used = ndesc;
return (ndesc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static int
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
try_txpkts(struct mbuf *m, struct mbuf *n, struct txpkts *txp, u_int available)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
u_int needed, nsegs1, nsegs2, l1, l2;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (cannot_use_txpkts(m) || cannot_use_txpkts(n))
return (1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
nsegs1 = mbuf_nsegs(m);
nsegs2 = mbuf_nsegs(n);
if (nsegs1 + nsegs2 == 2) {
txp->wr_type = 1;
l1 = l2 = txpkts1_len16();
} else {
txp->wr_type = 0;
l1 = txpkts0_len16(nsegs1);
l2 = txpkts0_len16(nsegs2);
}
txp->len16 = howmany(sizeof(struct fw_eth_tx_pkts_wr), 16) + l1 + l2;
needed = howmany(txp->len16, EQ_ESIZE / 16);
if (needed > SGE_MAX_WR_NDESC || needed > available)
return (1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
txp->plen = m->m_pkthdr.len + n->m_pkthdr.len;
if (txp->plen > 65535)
return (1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
txp->npkt = 2;
set_mbuf_len16(m, l1);
set_mbuf_len16(n, l2);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (0);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static int
add_to_txpkts(struct mbuf *m, struct txpkts *txp, u_int available)
{
u_int plen, len16, needed, nsegs;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS(txp->wr_type == 0 || txp->wr_type == 1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
nsegs = mbuf_nsegs(m);
if (needs_tso(m) || (txp->wr_type == 1 && nsegs != 1))
return (1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
plen = txp->plen + m->m_pkthdr.len;
if (plen > 65535)
return (1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (txp->wr_type == 0)
len16 = txpkts0_len16(nsegs);
else
len16 = txpkts1_len16();
needed = howmany(txp->len16 + len16, EQ_ESIZE / 16);
if (needed > SGE_MAX_WR_NDESC || needed > available)
return (1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
txp->npkt++;
txp->plen = plen;
txp->len16 += len16;
set_mbuf_len16(m, len16);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (0);
}
/*
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
* Write a txpkts WR for the packets in txp to the hardware descriptors, update
* the software descriptor, and advance the pidx. It is guaranteed that enough
* descriptors are available.
*
* The return value is the # of hardware descriptors used.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static u_int
write_txpkts_wr(struct sge_txq *txq, struct fw_eth_tx_pkts_wr *wr,
struct mbuf *m0, const struct txpkts *txp, u_int available)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
struct sge_eq *eq = &txq->eq;
struct tx_sdesc *txsd;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
struct cpl_tx_pkt_core *cpl;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
uint32_t ctrl;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
uint64_t ctrl1;
int ndesc, checkwrap;
struct mbuf *m;
void *flitp;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
TXQ_LOCK_ASSERT_OWNED(txq);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS(txp->npkt > 0);
MPASS(txp->plen < 65536);
MPASS(m0 != NULL);
MPASS(m0->m_nextpkt != NULL);
MPASS(txp->len16 <= howmany(SGE_MAX_WR_LEN, 16));
MPASS(available > 0 && available < eq->sidx);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
ndesc = howmany(txp->len16, EQ_ESIZE / 16);
MPASS(ndesc <= available);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS(wr == (void *)&eq->desc[eq->pidx]);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
wr->op_pkd = htobe32(V_FW_WR_OP(FW_ETH_TX_PKTS_WR));
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
ctrl = V_FW_WR_LEN16(txp->len16);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
wr->equiq_to_len16 = htobe32(ctrl);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
wr->plen = htobe16(txp->plen);
wr->npkt = txp->npkt;
wr->r3 = 0;
wr->type = txp->wr_type;
flitp = wr + 1;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
/*
* At this point we are 16B into a hardware descriptor. If checkwrap is
* set then we know the WR is going to wrap around somewhere. We'll
* check for that at appropriate points.
*/
checkwrap = eq->sidx - ndesc < eq->pidx;
for (m = m0; m != NULL; m = m->m_nextpkt) {
if (txp->wr_type == 0) {
struct ulp_txpkt *ulpmc;
struct ulptx_idata *ulpsc;
/* ULP master command */
ulpmc = flitp;
ulpmc->cmd_dest = htobe32(V_ULPTX_CMD(ULP_TX_PKT) |
V_ULP_TXPKT_DEST(0) | V_ULP_TXPKT_FID(eq->iqid));
ulpmc->len = htobe32(mbuf_len16(m));
/* ULP subcommand */
ulpsc = (void *)(ulpmc + 1);
ulpsc->cmd_more = htobe32(V_ULPTX_CMD(ULP_TX_SC_IMM) |
F_ULP_TX_SC_MORE);
ulpsc->len = htobe32(sizeof(struct cpl_tx_pkt_core));
cpl = (void *)(ulpsc + 1);
if (checkwrap &&
(uintptr_t)cpl == (uintptr_t)&eq->desc[eq->sidx])
cpl = (void *)&eq->desc[0];
} else {
cpl = flitp;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
/* Checksum offload */
ctrl1 = 0;
if (needs_l3_csum(m) == 0)
ctrl1 |= F_TXPKT_IPCSUM_DIS;
if (needs_l4_csum(m) == 0)
ctrl1 |= F_TXPKT_L4CSUM_DIS;
if (m->m_pkthdr.csum_flags & (CSUM_IP | CSUM_TCP | CSUM_UDP |
CSUM_UDP_IPV6 | CSUM_TCP_IPV6 | CSUM_TSO))
txq->txcsum++; /* some hardware assistance provided */
/* VLAN tag insertion */
if (needs_vlan_insertion(m)) {
ctrl1 |= F_TXPKT_VLAN_VLD |
V_TXPKT_VLAN(m->m_pkthdr.ether_vtag);
txq->vlan_insertion++;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
/* CPL header */
cpl->ctrl0 = txq->cpl_ctrl0;
cpl->pack = 0;
cpl->len = htobe16(m->m_pkthdr.len);
cpl->ctrl1 = htobe64(ctrl1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
flitp = cpl + 1;
if (checkwrap &&
(uintptr_t)flitp == (uintptr_t)&eq->desc[eq->sidx])
flitp = (void *)&eq->desc[0];
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
write_gl_to_txd(txq, m, (caddr_t *)(&flitp), checkwrap);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): Update the statistics for compound tx work requests once per work request, not once per frame. MFC after: 1 week Sponsored by: Chelsio Communications
2017-06-02 17:57:27 +00:00
if (txp->wr_type == 0) {
txq->txpkts0_pkts += txp->npkt;
txq->txpkts0_wrs++;
} else {
txq->txpkts1_pkts += txp->npkt;
txq->txpkts1_wrs++;
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
txsd = &txq->sdesc[eq->pidx];
txsd->m = m0;
txsd->desc_used = ndesc;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (ndesc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
/*
* If the SGL ends on an address that is not 16 byte aligned, this function will
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
* add a 0 filled flit at the end.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static void
write_gl_to_txd(struct sge_txq *txq, struct mbuf *m, caddr_t *to, int checkwrap)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
struct sge_eq *eq = &txq->eq;
struct sglist *gl = txq->gl;
struct sglist_seg *seg;
__be64 *flitp, *wrap;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct ulptx_sgl *usgl;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
int i, nflits, nsegs;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
KASSERT(((uintptr_t)(*to) & 0xf) == 0,
("%s: SGL must start at a 16 byte boundary: %p", __func__, *to));
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS((uintptr_t)(*to) >= (uintptr_t)&eq->desc[0]);
MPASS((uintptr_t)(*to) < (uintptr_t)&eq->desc[eq->sidx]);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
get_pkt_gl(m, gl);
nsegs = gl->sg_nseg;
MPASS(nsegs > 0);
nflits = (3 * (nsegs - 1)) / 2 + ((nsegs - 1) & 1) + 2;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
flitp = (__be64 *)(*to);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
wrap = (__be64 *)(&eq->desc[eq->sidx]);
seg = &gl->sg_segs[0];
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
usgl = (void *)flitp;
/*
* We start at a 16 byte boundary somewhere inside the tx descriptor
* ring, so we're at least 16 bytes away from the status page. There is
* no chance of a wrap around in the middle of usgl (which is 16 bytes).
*/
usgl->cmd_nsge = htobe32(V_ULPTX_CMD(ULP_TX_SC_DSGL) |
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
V_ULPTX_NSGE(nsegs));
usgl->len0 = htobe32(seg->ss_len);
usgl->addr0 = htobe64(seg->ss_paddr);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
seg++;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (checkwrap == 0 || (uintptr_t)(flitp + nflits) <= (uintptr_t)wrap) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* Won't wrap around at all */
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
for (i = 0; i < nsegs - 1; i++, seg++) {
usgl->sge[i / 2].len[i & 1] = htobe32(seg->ss_len);
usgl->sge[i / 2].addr[i & 1] = htobe64(seg->ss_paddr);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
if (i & 1)
usgl->sge[i / 2].len[1] = htobe32(0);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
flitp += nflits;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
} else {
/* Will wrap somewhere in the rest of the SGL */
/* 2 flits already written, write the rest flit by flit */
flitp = (void *)(usgl + 1);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
for (i = 0; i < nflits - 2; i++) {
if (flitp == wrap)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
flitp = (void *)eq->desc;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
*flitp++ = get_flit(seg, nsegs - 1, i);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (nflits & 1) {
MPASS(((uintptr_t)flitp) & 0xf);
*flitp++ = 0;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS((((uintptr_t)flitp) & 0xf) == 0);
if (__predict_false(flitp == wrap))
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*to = (void *)eq->desc;
else
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
*to = (void *)flitp;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static inline void
copy_to_txd(struct sge_eq *eq, caddr_t from, caddr_t *to, int len)
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS((uintptr_t)(*to) >= (uintptr_t)&eq->desc[0]);
MPASS((uintptr_t)(*to) < (uintptr_t)&eq->desc[eq->sidx]);
if (__predict_true((uintptr_t)(*to) + len <=
(uintptr_t)&eq->desc[eq->sidx])) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
bcopy(from, *to, len);
(*to) += len;
} else {
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
int portion = (uintptr_t)&eq->desc[eq->sidx] - (uintptr_t)(*to);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
bcopy(from, *to, portion);
from += portion;
portion = len - portion; /* remaining */
bcopy(from, (void *)eq->desc, portion);
(*to) = (caddr_t)eq->desc + portion;
}
}
static inline void
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
ring_eq_db(struct adapter *sc, struct sge_eq *eq, u_int n)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
u_int db;
MPASS(n > 0);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
db = eq->doorbells;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (n > 1)
Cosmetic change (s/wrwc/wcwr/;s/WRWC/WCWR/). MFC after: 3 days.
2013-04-11 22:49:29 +00:00
clrbit(&db, DOORBELL_WCWR);
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
wmb();
switch (ffs(db) - 1) {
case DOORBELL_UDB:
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
*eq->udb = htole32(V_QID(eq->udb_qid) | V_PIDX(n));
break;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
Cosmetic change (s/wrwc/wcwr/;s/WRWC/WCWR/). MFC after: 3 days.
2013-04-11 22:49:29 +00:00
case DOORBELL_WCWR: {
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
volatile uint64_t *dst, *src;
int i;
/*
* Queues whose 128B doorbell segment fits in the page do not
* use relative qid (udb_qid is always 0). Only queues with
Cosmetic change (s/wrwc/wcwr/;s/WRWC/WCWR/). MFC after: 3 days.
2013-04-11 22:49:29 +00:00
* doorbell segments can do WCWR.
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
*/
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
KASSERT(eq->udb_qid == 0 && n == 1,
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
("%s: inappropriate doorbell (0x%x, %d, %d) for eq %p",
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
__func__, eq->doorbells, n, eq->dbidx, eq));
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
dst = (volatile void *)((uintptr_t)eq->udb + UDBS_WR_OFFSET -
UDBS_DB_OFFSET);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
i = eq->dbidx;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
src = (void *)&eq->desc[i];
while (src != (void *)&eq->desc[i + 1])
*dst++ = *src++;
wmb();
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
break;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
}
case DOORBELL_UDBWC:
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
*eq->udb = htole32(V_QID(eq->udb_qid) | V_PIDX(n));
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
wmb();
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
break;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
case DOORBELL_KDB:
Store the offset of the KDOORBELL and GTS registers in the softc. VF devices use a different register layout than PF devices. Storing the offset in a value in the softc allows code to be shared between the PF and VF drivers. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7389
2016-08-01 22:39:51 +00:00
t4_write_reg(sc, sc->sge_kdoorbell_reg,
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
V_QID(eq->cntxt_id) | V_PIDX(n));
break;
cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This includes support for the NIC and TOE features of the 40G, 10G, and 1G/100M cards based on the T5. The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4) has been updated instead of writing a brand new driver. T5 cards will show up as cxl (short for cxlgb) ports attached to the t5nex bus driver. Sponsored by: Chelsio
2013-03-30 02:26:20 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
IDXINCR(eq->dbidx, n, eq->sidx);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static inline u_int
reclaimable_tx_desc(struct sge_eq *eq)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
uint16_t hw_cidx;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
hw_cidx = read_hw_cidx(eq);
return (IDXDIFF(hw_cidx, eq->cidx, eq->sidx));
}
static inline u_int
total_available_tx_desc(struct sge_eq *eq)
{
uint16_t hw_cidx, pidx;
hw_cidx = read_hw_cidx(eq);
pidx = eq->pidx;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
if (pidx == hw_cidx)
return (eq->sidx - 1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
else
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (IDXDIFF(hw_cidx, pidx, eq->sidx) - 1);
}
static inline uint16_t
read_hw_cidx(struct sge_eq *eq)
{
struct sge_qstat *spg = (void *)&eq->desc[eq->sidx];
uint16_t cidx = spg->cidx; /* stable snapshot */
return (be16toh(cidx));
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
}
/*
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
* Reclaim 'n' descriptors approximately.
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
*/
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static u_int
reclaim_tx_descs(struct sge_txq *txq, u_int n)
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
{
struct tx_sdesc *txsd;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
struct sge_eq *eq = &txq->eq;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
u_int can_reclaim, reclaimed;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
TXQ_LOCK_ASSERT_OWNED(txq);
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
MPASS(n > 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
reclaimed = 0;
can_reclaim = reclaimable_tx_desc(eq);
while (can_reclaim && reclaimed < n) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
int ndesc;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
struct mbuf *m, *nextpkt;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
txsd = &txq->sdesc[eq->cidx];
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ndesc = txsd->desc_used;
/* Firmware doesn't return "partial" credits. */
KASSERT(can_reclaim >= ndesc,
("%s: unexpected number of credits: %d, %d",
__func__, can_reclaim, ndesc));
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
for (m = txsd->m; m != NULL; m = nextpkt) {
nextpkt = m->m_nextpkt;
m->m_nextpkt = NULL;
m_freem(m);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
reclaimed += ndesc;
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
can_reclaim -= ndesc;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
IDXINCR(eq->cidx, ndesc, eq->sidx);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
return (reclaimed);
}
static void
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
tx_reclaim(void *arg, int n)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
struct sge_txq *txq = arg;
struct sge_eq *eq = &txq->eq;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
do {
if (TXQ_TRYLOCK(txq) == 0)
break;
n = reclaim_tx_descs(txq, 32);
if (eq->cidx == eq->pidx)
eq->equeqidx = eq->pidx;
TXQ_UNLOCK(txq);
} while (n > 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static __be64
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
get_flit(struct sglist_seg *segs, int nsegs, int idx)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
int i = (idx / 3) * 2;
switch (idx % 3) {
case 0: {
CXGBE: fix get_filt to be endianness-aware Unconditional 32-bit shift is not endianness-safe. Modify the logic to work both on LE and BE. Submitted by: Wojciech Macek <wma@freebsd.org> Reviewed by: np Obtained from: Semihalf Sponsored by: IBM, QCM Technologies Differential revision: https://reviews.freebsd.org/D13102
2018-01-11 09:17:02 +00:00
uint64_t rc;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
CXGBE: fix get_filt to be endianness-aware Unconditional 32-bit shift is not endianness-safe. Modify the logic to work both on LE and BE. Submitted by: Wojciech Macek <wma@freebsd.org> Reviewed by: np Obtained from: Semihalf Sponsored by: IBM, QCM Technologies Differential revision: https://reviews.freebsd.org/D13102
2018-01-11 09:17:02 +00:00
rc = (uint64_t)segs[i].ss_len << 32;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (i + 1 < nsegs)
CXGBE: fix get_filt to be endianness-aware Unconditional 32-bit shift is not endianness-safe. Modify the logic to work both on LE and BE. Submitted by: Wojciech Macek <wma@freebsd.org> Reviewed by: np Obtained from: Semihalf Sponsored by: IBM, QCM Technologies Differential revision: https://reviews.freebsd.org/D13102
2018-01-11 09:17:02 +00:00
rc |= (uint64_t)(segs[i + 1].ss_len);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
CXGBE: fix get_filt to be endianness-aware Unconditional 32-bit shift is not endianness-safe. Modify the logic to work both on LE and BE. Submitted by: Wojciech Macek <wma@freebsd.org> Reviewed by: np Obtained from: Semihalf Sponsored by: IBM, QCM Technologies Differential revision: https://reviews.freebsd.org/D13102
2018-01-11 09:17:02 +00:00
return (htobe64(rc));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
case 1:
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (htobe64(segs[i].ss_paddr));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
case 2:
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
return (htobe64(segs[i + 1].ss_paddr));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
return (0);
}
static void
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
find_best_refill_source(struct adapter *sc, struct sge_fl *fl, int maxp)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
int8_t zidx, hwidx, idx;
uint16_t region1, region3;
int spare, spare_needed, n;
struct sw_zone_info *swz;
struct hw_buf_info *hwb, *hwb_list = &sc->sge.hw_buf_info[0];
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/*
* Buffer Packing: Look for PAGE_SIZE or larger zone which has a bufsize
* large enough for the max payload and cluster metadata. Otherwise
* settle for the largest bufsize that leaves enough room in the cluster
* for metadata.
*
* Without buffer packing: Look for the smallest zone which has a
* bufsize large enough for the max payload. Settle for the largest
* bufsize available if there's nothing big enough for max payload.
*/
spare_needed = fl->flags & FL_BUF_PACKING ? CL_METADATA_SIZE : 0;
swz = &sc->sge.sw_zone_info[0];
hwidx = -1;
for (zidx = 0; zidx < SW_ZONE_SIZES; zidx++, swz++) {
if (swz->size > largest_rx_cluster) {
if (__predict_true(hwidx != -1))
break;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
/*
* This is a misconfiguration. largest_rx_cluster is
* preventing us from finding a refill source. See
* dev.t5nex.<n>.buffer_sizes to figure out why.
*/
device_printf(sc->dev, "largest_rx_cluster=%u leaves no"
" refill source for fl %p (dma %u). Ignored.\n",
largest_rx_cluster, fl, maxp);
}
for (idx = swz->head_hwidx; idx != -1; idx = hwb->next) {
hwb = &hwb_list[idx];
spare = swz->size - hwb->size;
if (spare < spare_needed)
continue;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
hwidx = idx; /* best option so far */
if (hwb->size >= maxp) {
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if ((fl->flags & FL_BUF_PACKING) == 0)
goto done; /* stop looking (not packing) */
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if (swz->size >= safest_rx_cluster)
goto done; /* stop looking (packing) */
}
break; /* keep looking, next zone */
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
}
done:
/* A usable hwidx has been located. */
MPASS(hwidx != -1);
hwb = &hwb_list[hwidx];
zidx = hwb->zidx;
swz = &sc->sge.sw_zone_info[zidx];
region1 = 0;
region3 = swz->size - hwb->size;
/*
* Stay within this zone and see if there is a better match when mbuf
* inlining is allowed. Remember that the hwidx's are sorted in
* decreasing order of size (so in increasing order of spare area).
*/
for (idx = hwidx; idx != -1; idx = hwb->next) {
hwb = &hwb_list[idx];
spare = swz->size - hwb->size;
if (allow_mbufs_in_cluster == 0 || hwb->size < maxp)
break;
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
/*
* Do not inline mbufs if doing so would violate the pad/pack
* boundary alignment requirement.
*/
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
if (fl_pad && (MSIZE % sc->params.sge.pad_boundary) != 0)
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
continue;
if (fl->flags & FL_BUF_PACKING &&
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
(MSIZE % sc->params.sge.pack_boundary) != 0)
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
continue;
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
if (spare < CL_METADATA_SIZE + MSIZE)
continue;
n = (spare - CL_METADATA_SIZE) / MSIZE;
if (n > howmany(hwb->size, maxp))
break;
hwidx = idx;
if (fl->flags & FL_BUF_PACKING) {
region1 = n * MSIZE;
region3 = spare - region1;
} else {
region1 = MSIZE;
region3 = spare - region1;
break;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
}
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
KASSERT(zidx >= 0 && zidx < SW_ZONE_SIZES,
("%s: bad zone %d for fl %p, maxp %d", __func__, zidx, fl, maxp));
KASSERT(hwidx >= 0 && hwidx <= SGE_FLBUF_SIZES,
("%s: bad hwidx %d for fl %p, maxp %d", __func__, hwidx, fl, maxp));
KASSERT(region1 + sc->sge.hw_buf_info[hwidx].size + region3 ==
sc->sge.sw_zone_info[zidx].size,
("%s: bad buffer layout for fl %p, maxp %d. "
"cl %d; r1 %d, payload %d, r3 %d", __func__, fl, maxp,
sc->sge.sw_zone_info[zidx].size, region1,
sc->sge.hw_buf_info[hwidx].size, region3));
if (fl->flags & FL_BUF_PACKING || region1 > 0) {
KASSERT(region3 >= CL_METADATA_SIZE,
("%s: no room for metadata. fl %p, maxp %d; "
"cl %d; r1 %d, payload %d, r3 %d", __func__, fl, maxp,
sc->sge.sw_zone_info[zidx].size, region1,
sc->sge.hw_buf_info[hwidx].size, region3));
KASSERT(region1 % MSIZE == 0,
("%s: bad mbuf region for fl %p, maxp %d. "
"cl %d; r1 %d, payload %d, r3 %d", __func__, fl, maxp,
sc->sge.sw_zone_info[zidx].size, region1,
sc->sge.hw_buf_info[hwidx].size, region3));
}
fl->cll_def.zidx = zidx;
fl->cll_def.hwidx = hwidx;
fl->cll_def.region1 = region1;
fl->cll_def.region3 = region3;
}
static void
find_safe_refill_source(struct adapter *sc, struct sge_fl *fl)
{
struct sge *s = &sc->sge;
struct hw_buf_info *hwb;
struct sw_zone_info *swz;
int spare;
int8_t hwidx;
if (fl->flags & FL_BUF_PACKING)
hwidx = s->safe_hwidx2; /* with room for metadata */
else if (allow_mbufs_in_cluster && s->safe_hwidx2 != -1) {
hwidx = s->safe_hwidx2;
hwb = &s->hw_buf_info[hwidx];
swz = &s->sw_zone_info[hwb->zidx];
spare = swz->size - hwb->size;
/* no good if there isn't room for an mbuf as well */
if (spare < CL_METADATA_SIZE + MSIZE)
hwidx = s->safe_hwidx1;
} else
hwidx = s->safe_hwidx1;
if (hwidx == -1) {
/* No fallback source */
fl->cll_alt.hwidx = -1;
fl->cll_alt.zidx = -1;
return;
}
hwb = &s->hw_buf_info[hwidx];
swz = &s->sw_zone_info[hwb->zidx];
spare = swz->size - hwb->size;
fl->cll_alt.hwidx = hwidx;
fl->cll_alt.zidx = hwb->zidx;
cxgbe(4): Allow for different pad and pack boundaries for different adapters. Set the pack boundary for T5 cards to be the same as the PCIe max payload size. The chip likes it this way. In this revision the driver allocate rx buffers that align on both boundaries. This is not a strict requirement and a followup commit will switch the driver to a more relaxed allocation strategy. MFC after: 2 weeks
2014-12-06 00:13:56 +00:00
if (allow_mbufs_in_cluster &&
cxgbe(4): Add a struct sge_params to store per-adapter SGE parameters. Move the code that reads all the parameters to t4_init_sge_params in the shared code. Use these per-adapter values instead of globals. Sponsored by: Chelsio Communications
2016-03-08 00:23:56 +00:00
(fl_pad == 0 || (MSIZE % sc->params.sge.pad_boundary) == 0))
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
fl->cll_alt.region1 = ((spare - CL_METADATA_SIZE) / MSIZE) * MSIZE;
Implement support for rx buffer packing. Enable it by default for T5 cards. This is a T4 and T5 chip feature which lets the chip deliver multiple Ethernet frames in a single buffer. This is more efficient within the chip, in the driver, and reduces wastage of space in rx buffers. - Always allocate rx buffers from the jumbop zone, no matter what the MTU is. Do not use the normal cluster refcounting mechanism. - Reserve space for an mbuf and a refcount in the cluster itself and let the chip DMA multiple frames in the rest. - Use the embedded mbuf for the first frame and allocate mbufs on the fly for any additional frames delivered in the cluster. Each of these mbufs has a reference on the underlying cluster.
2013-08-30 01:45:36 +00:00
else
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
fl->cll_alt.region1 = 0;
fl->cll_alt.region3 = spare - fl->cll_alt.region1;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
static void
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
add_fl_to_sfl(struct adapter *sc, struct sge_fl *fl)
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
mtx_lock(&sc->sfl_lock);
FL_LOCK(fl);
if ((fl->flags & FL_DOOMED) == 0) {
fl->flags |= FL_STARVING;
TAILQ_INSERT_TAIL(&sc->sfl, fl, link);
callout_reset(&sc->sfl_callout, hz / 5, refill_sfl, sc);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
FL_UNLOCK(fl);
mtx_unlock(&sc->sfl_lock);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
}
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static void
handle_wrq_egr_update(struct adapter *sc, struct sge_eq *eq)
{
struct sge_wrq *wrq = (void *)eq;
atomic_readandclear_int(&eq->equiq);
taskqueue_enqueue(sc->tq[eq->tx_chan], &wrq->wrq_tx_task);
}
static void
handle_eth_egr_update(struct adapter *sc, struct sge_eq *eq)
{
struct sge_txq *txq = (void *)eq;
MPASS((eq->flags & EQ_TYPEMASK) == EQ_ETH);
atomic_readandclear_int(&eq->equiq);
mp_ring_check_drainage(txq->r, 0);
taskqueue_enqueue(sc->tq[eq->tx_chan], &txq->tx_reclaim_task);
}
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
handle_sge_egr_update(struct sge_iq *iq, const struct rss_header *rss,
struct mbuf *m)
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
const struct cpl_sge_egr_update *cpl = (const void *)(rss + 1);
unsigned int qid = G_EGR_QID(ntohl(cpl->opcode_qid));
struct adapter *sc = iq->adapter;
struct sge *s = &sc->sge;
struct sge_eq *eq;
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
static void (*h[])(struct adapter *, struct sge_eq *) = {NULL,
&handle_wrq_egr_update, &handle_eth_egr_update,
&handle_wrq_egr_update};
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(m == NULL, ("%s: payload with opcode %02x", __func__,
rss->opcode));
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Track the base absolute ID of ingress and egress queues. Use this to map an absolute queue ID to a logical queue ID in interrupt handlers. For the regular cxgbe/cxl drivers this should be a no-op as the base absolute ID should be zero. VF devices have a non-zero base absolute ID and require this change. While here, export the absolute ID of egress queues via a sysctl. Reviewed by: np Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D7446
2016-08-09 17:49:42 +00:00
eq = s->eqmap[qid - s->eq_start - s->eq_base];
cxgbe(4): major tx rework. a) Front load as much work as possible in if_transmit, before any driver lock or software queue has to get involved. b) Replace buf_ring with a brand new mp_ring (multiproducer ring). This is specifically for the tx multiqueue model where one of the if_transmit producer threads becomes the consumer and other producers carry on as usual. mp_ring is implemented as standalone code and it should be possible to use it in any driver with tx multiqueue. It also has: - the ability to enqueue/dequeue multiple items. This might become significant if packet batching is ever implemented. - an abdication mechanism to allow a thread to give up writing tx descriptors and have another if_transmit thread take over. A thread that's writing tx descriptors can end up doing so for an unbounded time period if a) there are other if_transmit threads continuously feeding the sofware queue, and b) the chip keeps up with whatever the thread is throwing at it. - accurate statistics about interesting events even when the stats come at the expense of additional branches/conditional code. The NIC txq lock is uncontested on the fast path at this point. I've left it there for synchronization with the control events (interface up/down, modload/unload). c) Add support for "type 1" coalescing work request in the normal NIC tx path. This work request is optimized for frames with a single item in the DMA gather list. These are very common when forwarding packets. Note that netmap tx in cxgbe already uses these "type 1" work requests. d) Do not request automatic cidx updates every 32 descriptors. Instead, request updates via bits in individual work requests (still every 32 descriptors approximately). Also, request an automatic final update when the queue idles after activity. This means NIC tx reclaim is still performed lazily but it will catch up quickly as soon as the queue idles. This seems to be the best middle ground and I'll probably do something similar for netmap tx as well. e) Implement a faster tx path for WRQs (used by TOE tx and control queues, _not_ by the normal NIC tx). Allow work requests to be written directly to the hardware descriptor ring if room is available. I will convert t4_tom and iw_cxgbe modules to this faster style gradually. MFC after: 2 months
2014-12-31 23:19:16 +00:00
(*h[eq->flags & EQ_TYPEMASK])(sc, eq);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
}
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating them in a firmware message if it is able to do so. This works out better for one of the FIFOs in the chip. MFC after: 5 days
2013-02-26 00:27:27 +00:00
/* handle_fw_msg works for both fw4_msg and fw6_msg because this is valid */
CTASSERT(offsetof(struct cpl_fw4_msg, data) == \
offsetof(struct cpl_fw6_msg, data));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
handle_fw_msg(struct sge_iq *iq, const struct rss_header *rss, struct mbuf *m)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
{
Allow for a different handler for each type of firmware message. MFC after: 2 weeks
2012-08-16 18:31:50 +00:00
struct adapter *sc = iq->adapter;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
const struct cpl_fw6_msg *cpl = (const void *)(rss + 1);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(m == NULL, ("%s: payload with opcode %02x", __func__,
rss->opcode));
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating them in a firmware message if it is able to do so. This works out better for one of the FIFOs in the chip. MFC after: 5 days
2013-02-26 00:27:27 +00:00
if (cpl->type == FW_TYPE_RSSCPL || cpl->type == FW6_TYPE_RSSCPL) {
const struct rss_header *rss2;
rss2 = (const struct rss_header *)&cpl->data[0];
cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications
2016-07-05 01:29:24 +00:00
return (t4_cpl_handler[rss2->opcode](iq, rss2, m));
cxgbe(4): Ask the card's firmware to pad up tiny CPLs by encapsulating them in a firmware message if it is able to do so. This works out better for one of the FIFOs in the chip. MFC after: 5 days
2013-02-26 00:27:27 +00:00
}
cxgbe(4): Changes to the CPL-handler registration mechanism and code related to "shared" CPLs. a) Combine t4_set_tcb_field and t4_set_tcb_field_rpl into a single function. Allow callers to direct the response to any iq. Tidy up set_ulp_mode_iscsi while there to use names from t4_tcb.h instead of magic constants. b) Remove all CPL handler tables from struct adapter. This reduces its size by around 2KB. All handlers are now registered at MOD_LOAD instead of attach or some kind of initialization/activation. The registration functions do not need an adapter parameter any more. c) Add per-iq handlers to deal with CPLs whose destination cannot be determined solely from the opcode. There are 2 such CPLs in use right now: SET_TCB_RPL and L2T_WRITE_RPL. The base driver continues to send filter and L2T_WRITEs over the mgmtq and solicits the reply on fwq. t4_tom (including the DDP code) now uses the port's ctrlq to send L2T_WRITEs and SET_TCB_FIELDs and solicits the reply on an ofld_rxq. fwq and ofld_rxq have different handlers that know what kind of tid to expect in the reply. Update t4_write_l2e and callers to to support any wrq/iq combination. Approved by: re@ (kib@) Sponsored by: Chelsio Communications
2016-07-05 01:29:24 +00:00
return (t4_fw_msg_handler[cpl->type](sc, &cpl->data[0]));
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
}
sysctl that displays the absolute queue id of an rxq.
2011-05-14 19:27:15 +00:00
Install a handler for firmware work request error messages. If a driver sends an malformed or disallowed work request, the firmware responds with a work request error. Previously the driver treated this is as an unexpected message and panicked. Now it decodes the error message to aid in debugging. Reviewed by: np (older version) MFC after: 1 month Sponsored by: Chelsio Communications Differential Revision: https://reviews.freebsd.org/D6950
2016-07-22 21:52:07 +00:00
/**
* t4_handle_wrerr_rpl - process a FW work request error message
* @adap: the adapter
* @rpl: start of the FW message
*/
static int
t4_handle_wrerr_rpl(struct adapter *adap, const __be64 *rpl)
{
u8 opcode = *(const u8 *)rpl;
const struct fw_error_cmd *e = (const void *)rpl;
unsigned int i;
if (opcode != FW_ERROR_CMD) {
log(LOG_ERR,
"%s: Received WRERR_RPL message with opcode %#x\n",
device_get_nameunit(adap->dev), opcode);
return (EINVAL);
}
log(LOG_ERR, "%s: FW_ERROR (%s) ", device_get_nameunit(adap->dev),
G_FW_ERROR_CMD_FATAL(be32toh(e->op_to_type)) ? "fatal" :
"non-fatal");
switch (G_FW_ERROR_CMD_TYPE(be32toh(e->op_to_type))) {
case FW_ERROR_TYPE_EXCEPTION:
log(LOG_ERR, "exception info:\n");
for (i = 0; i < nitems(e->u.exception.info); i++)
log(LOG_ERR, "%s%08x", i == 0 ? "\t" : " ",
be32toh(e->u.exception.info[i]));
log(LOG_ERR, "\n");
break;
case FW_ERROR_TYPE_HWMODULE:
log(LOG_ERR, "HW module regaddr %08x regval %08x\n",
be32toh(e->u.hwmodule.regaddr),
be32toh(e->u.hwmodule.regval));
break;
case FW_ERROR_TYPE_WR:
log(LOG_ERR, "WR cidx %d PF %d VF %d eqid %d hdr:\n",
be16toh(e->u.wr.cidx),
G_FW_ERROR_CMD_PFN(be16toh(e->u.wr.pfn_vfn)),
G_FW_ERROR_CMD_VFN(be16toh(e->u.wr.pfn_vfn)),
be32toh(e->u.wr.eqid));
for (i = 0; i < nitems(e->u.wr.wrhdr); i++)
log(LOG_ERR, "%s%02x", i == 0 ? "\t" : " ",
e->u.wr.wrhdr[i]);
log(LOG_ERR, "\n");
break;
case FW_ERROR_TYPE_ACL:
log(LOG_ERR, "ACL cidx %d PF %d VF %d eqid %d %s",
be16toh(e->u.acl.cidx),
G_FW_ERROR_CMD_PFN(be16toh(e->u.acl.pfn_vfn)),
G_FW_ERROR_CMD_VFN(be16toh(e->u.acl.pfn_vfn)),
be32toh(e->u.acl.eqid),
G_FW_ERROR_CMD_MV(be16toh(e->u.acl.mv_pkd)) ? "vlanid" :
"MAC");
for (i = 0; i < nitems(e->u.acl.val); i++)
log(LOG_ERR, " %02x", e->u.acl.val[i]);
log(LOG_ERR, "\n");
break;
default:
log(LOG_ERR, "type %#x\n",
G_FW_ERROR_CMD_TYPE(be32toh(e->op_to_type)));
return (EINVAL);
}
return (0);
}
sysctl that displays the absolute queue id of an rxq.
2011-05-14 19:27:15 +00:00
static int
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
sysctl_uint16(SYSCTL_HANDLER_ARGS)
sysctl that displays the absolute queue id of an rxq.
2011-05-14 19:27:15 +00:00
{
uint16_t *id = arg1;
int i = *id;
return sysctl_handle_int(oidp, &i, 0, req);
}
cxgbe(4): significant rx rework. - More flexible cluster size selection, including the ability to fall back to a safe cluster size (PAGE_SIZE from zone_jumbop by default) in case an allocation of a larger size fails. - A single get_fl_payload() function that assembles the payload into an mbuf chain for any kind of freelist. This replaces two variants: one for freelists with buffer packing enabled and another for those without. - Buffer packing with any sized cluster. It was limited to 4K clusters only before this change. - Enable buffer packing for TOE rx queues as well. - Statistics and tunables to go with all these changes. The driver's man page will be updated separately. MFC after: 5 weeks
2014-03-18 20:14:13 +00:00
static int
sysctl_bufsizes(SYSCTL_HANDLER_ARGS)
{
struct sge *s = arg1;
struct hw_buf_info *hwb = &s->hw_buf_info[0];
struct sw_zone_info *swz = &s->sw_zone_info[0];
int i, rc;
struct sbuf sb;
char c;
sbuf_new(&sb, NULL, 32, SBUF_AUTOEXTEND);
for (i = 0; i < SGE_FLBUF_SIZES; i++, hwb++) {
if (hwb->zidx >= 0 && swz[hwb->zidx].size <= largest_rx_cluster)
c = '*';
else
c = '\0';
sbuf_printf(&sb, "%u%c ", hwb->size, c);
}
sbuf_trim(&sb);
sbuf_finish(&sb);
rc = sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req);
sbuf_delete(&sb);
return (rc);
}
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
static int
sysctl_tc(SYSCTL_HANDLER_ARGS)
{
struct vi_info *vi = arg1;
struct port_info *pi;
struct adapter *sc;
struct sge_txq *txq;
cxgbe(4): Support routines for Tx traffic scheduling. - Create a new file, t4_sched.c, and move all of the code related to traffic management from t4_main.c and t4_sge.c to this file. - Track both Channel Rate Limiter (ch_rl) and Class Rate Limiter (cl_rl) parameters in the PF driver. - Initialize all the cl_rl limiters with somewhat arbitrary default rates and provide routines to update them on the fly. - Provide routines to reserve and release traffic classes. MFC after: 1 month Sponsored by: Chelsio Communications
2017-05-02 20:38:10 +00:00
struct tx_cl_rl_params *tc;
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
int qidx = arg2, rc, tc_idx;
uint32_t fw_queue, fw_class;
MPASS(qidx >= 0 && qidx < vi->ntxq);
pi = vi->pi;
sc = pi->adapter;
txq = &sc->sge.txq[vi->first_txq + qidx];
tc_idx = txq->tc_idx;
rc = sysctl_handle_int(oidp, &tc_idx, 0, req);
if (rc != 0 || req->newptr == NULL)
return (rc);
cxgbe(4): Support routines for Tx traffic scheduling. - Create a new file, t4_sched.c, and move all of the code related to traffic management from t4_main.c and t4_sge.c to this file. - Track both Channel Rate Limiter (ch_rl) and Class Rate Limiter (cl_rl) parameters in the PF driver. - Initialize all the cl_rl limiters with somewhat arbitrary default rates and provide routines to update them on the fly. - Provide routines to reserve and release traffic classes. MFC after: 1 month Sponsored by: Chelsio Communications
2017-05-02 20:38:10 +00:00
if (sc->flags & IS_VF)
return (EPERM);
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
/* Note that -1 is legitimate input (it means unbind). */
if (tc_idx < -1 || tc_idx >= sc->chip_params->nsched_cls)
return (EINVAL);
cxgbe(4): Support routines for Tx traffic scheduling. - Create a new file, t4_sched.c, and move all of the code related to traffic management from t4_main.c and t4_sge.c to this file. - Track both Channel Rate Limiter (ch_rl) and Class Rate Limiter (cl_rl) parameters in the PF driver. - Initialize all the cl_rl limiters with somewhat arbitrary default rates and provide routines to update them on the fly. - Provide routines to reserve and release traffic classes. MFC after: 1 month Sponsored by: Chelsio Communications
2017-05-02 20:38:10 +00:00
mtx_lock(&sc->tc_lock);
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
if (tc_idx == txq->tc_idx) {
rc = 0; /* No change, nothing to do. */
goto done;
}
fw_queue = V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) |
V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DMAQ_EQ_SCHEDCLASS_ETH) |
V_FW_PARAMS_PARAM_YZ(txq->eq.cntxt_id);
if (tc_idx == -1)
fw_class = 0xffffffff; /* Unbind. */
else {
/*
cxgbe(4): Support routines for Tx traffic scheduling. - Create a new file, t4_sched.c, and move all of the code related to traffic management from t4_main.c and t4_sge.c to this file. - Track both Channel Rate Limiter (ch_rl) and Class Rate Limiter (cl_rl) parameters in the PF driver. - Initialize all the cl_rl limiters with somewhat arbitrary default rates and provide routines to update them on the fly. - Provide routines to reserve and release traffic classes. MFC after: 1 month Sponsored by: Chelsio Communications
2017-05-02 20:38:10 +00:00
* Bind to a different class.
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
*/
cxgbe(4): Support routines for Tx traffic scheduling. - Create a new file, t4_sched.c, and move all of the code related to traffic management from t4_main.c and t4_sge.c to this file. - Track both Channel Rate Limiter (ch_rl) and Class Rate Limiter (cl_rl) parameters in the PF driver. - Initialize all the cl_rl limiters with somewhat arbitrary default rates and provide routines to update them on the fly. - Provide routines to reserve and release traffic classes. MFC after: 1 month Sponsored by: Chelsio Communications
2017-05-02 20:38:10 +00:00
tc = &pi->sched_params->cl_rl[tc_idx];
if (tc->flags & TX_CLRL_ERROR) {
/* Previous attempt to set the cl-rl params failed. */
rc = EIO;
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
goto done;
cxgbe(4): Support routines for Tx traffic scheduling. - Create a new file, t4_sched.c, and move all of the code related to traffic management from t4_main.c and t4_sge.c to this file. - Track both Channel Rate Limiter (ch_rl) and Class Rate Limiter (cl_rl) parameters in the PF driver. - Initialize all the cl_rl limiters with somewhat arbitrary default rates and provide routines to update them on the fly. - Provide routines to reserve and release traffic classes. MFC after: 1 month Sponsored by: Chelsio Communications
2017-05-02 20:38:10 +00:00
} else {
/*
* Ok to proceed. Place a reference on the new class
* while still holding on to the reference on the
* previous class, if any.
*/
fw_class = tc_idx;
tc->refcount++;
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
}
}
cxgbe(4): Support routines for Tx traffic scheduling. - Create a new file, t4_sched.c, and move all of the code related to traffic management from t4_main.c and t4_sge.c to this file. - Track both Channel Rate Limiter (ch_rl) and Class Rate Limiter (cl_rl) parameters in the PF driver. - Initialize all the cl_rl limiters with somewhat arbitrary default rates and provide routines to update them on the fly. - Provide routines to reserve and release traffic classes. MFC after: 1 month Sponsored by: Chelsio Communications
2017-05-02 20:38:10 +00:00
mtx_unlock(&sc->tc_lock);
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
cxgbe(4): Support routines for Tx traffic scheduling. - Create a new file, t4_sched.c, and move all of the code related to traffic management from t4_main.c and t4_sge.c to this file. - Track both Channel Rate Limiter (ch_rl) and Class Rate Limiter (cl_rl) parameters in the PF driver. - Initialize all the cl_rl limiters with somewhat arbitrary default rates and provide routines to update them on the fly. - Provide routines to reserve and release traffic classes. MFC after: 1 month Sponsored by: Chelsio Communications
2017-05-02 20:38:10 +00:00
rc = begin_synchronized_op(sc, vi, SLEEP_OK | INTR_OK, "t4stc");
if (rc)
return (rc);
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
rc = -t4_set_params(sc, sc->mbox, sc->pf, 0, 1, &fw_queue, &fw_class);
cxgbe(4): Support routines for Tx traffic scheduling. - Create a new file, t4_sched.c, and move all of the code related to traffic management from t4_main.c and t4_sge.c to this file. - Track both Channel Rate Limiter (ch_rl) and Class Rate Limiter (cl_rl) parameters in the PF driver. - Initialize all the cl_rl limiters with somewhat arbitrary default rates and provide routines to update them on the fly. - Provide routines to reserve and release traffic classes. MFC after: 1 month Sponsored by: Chelsio Communications
2017-05-02 20:38:10 +00:00
end_synchronized_op(sc, 0);
mtx_lock(&sc->tc_lock);
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
if (rc == 0) {
if (txq->tc_idx != -1) {
cxgbe(4): Support routines for Tx traffic scheduling. - Create a new file, t4_sched.c, and move all of the code related to traffic management from t4_main.c and t4_sge.c to this file. - Track both Channel Rate Limiter (ch_rl) and Class Rate Limiter (cl_rl) parameters in the PF driver. - Initialize all the cl_rl limiters with somewhat arbitrary default rates and provide routines to update them on the fly. - Provide routines to reserve and release traffic classes. MFC after: 1 month Sponsored by: Chelsio Communications
2017-05-02 20:38:10 +00:00
tc = &pi->sched_params->cl_rl[txq->tc_idx];
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
MPASS(tc->refcount > 0);
tc->refcount--;
}
txq->tc_idx = tc_idx;
cxgbe(4): Avoid an out of bounds access when an attempt to unbind a tx queue from a traffic class fails. Reported by: x ksi <s3810 at pjwstk edu pl> MFC after: 3 days
2017-05-15 18:18:32 +00:00
} else if (tc_idx != -1) {
cxgbe(4): Support routines for Tx traffic scheduling. - Create a new file, t4_sched.c, and move all of the code related to traffic management from t4_main.c and t4_sge.c to this file. - Track both Channel Rate Limiter (ch_rl) and Class Rate Limiter (cl_rl) parameters in the PF driver. - Initialize all the cl_rl limiters with somewhat arbitrary default rates and provide routines to update them on the fly. - Provide routines to reserve and release traffic classes. MFC after: 1 month Sponsored by: Chelsio Communications
2017-05-02 20:38:10 +00:00
tc = &pi->sched_params->cl_rl[tc_idx];
MPASS(tc->refcount > 0);
tc->refcount--;
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
}
done:
cxgbe(4): Support routines for Tx traffic scheduling. - Create a new file, t4_sched.c, and move all of the code related to traffic management from t4_main.c and t4_sge.c to this file. - Track both Channel Rate Limiter (ch_rl) and Class Rate Limiter (cl_rl) parameters in the PF driver. - Initialize all the cl_rl limiters with somewhat arbitrary default rates and provide routines to update them on the fly. - Provide routines to reserve and release traffic classes. MFC after: 1 month Sponsored by: Chelsio Communications
2017-05-02 20:38:10 +00:00
mtx_unlock(&sc->tc_lock);
cxgbe(4): Add a sysctl to manage the binding of a txq to a traffic class. Sponsored by: Chelsio Communications
2016-06-08 14:15:29 +00:00
return (rc);
}
Reference in New Issue Copy Permalink