1584 lines
37 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2011 NetApp, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#ifndef WITHOUT_CAPSICUM
#include <sys/capsicum.h>
#endif
#include <sys/mman.h>
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
#include <sys/socket.h>
#include <sys/stat.h>
#endif
#include <sys/time.h>
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
#include <sys/un.h>
#endif
#include <amd64/vmm/intel/vmcs.h>
#include <machine/atomic.h>
#include <machine/segments.h>
#ifndef WITHOUT_CAPSICUM
#include <capsicum_helpers.h>
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <err.h>
#include <errno.h>
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
#include <fcntl.h>
#endif
#include <libgen.h>
#include <unistd.h>
#include <assert.h>
#include <pthread.h>
#include <pthread_np.h>
#include <sysexits.h>
#include <stdbool.h>
#include <stdint.h>
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
#include <ucl.h>
#include <unistd.h>
#include <libxo/xo.h>
#endif
#include <machine/vmm.h>
#ifndef WITHOUT_CAPSICUM
#include <machine/vmm_dev.h>
#endif
#include <machine/vmm_instruction_emul.h>
#include <vmmapi.h>
#include "bhyverun.h"
#include "acpi.h"
#include "atkbdc.h"
#include "bootrom.h"
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
#include "config.h"
#include "inout.h"
#include "debug.h"
#include "fwctl.h"
Initial debug server for bhyve. This commit adds a new debug server to bhyve. Unlike the existing -g option which provides an efficient connection to a debug server running in the guest OS, this debug server permits inspection and control of the guest from within the hypervisor itself without requiring any cooperation from the guest. It is similar to the debug server provided by qemu. To avoid conflicting with the existing -g option, a new -G option has been added that accepts a TCP port. An IPv4 socket is bound to this port and listens for connections from debuggers. In addition, if the port begins with the character 'w', the hypervisor will pause the guest at the first instruction until a debugger attaches and explicitly continues the guest. Note that only a single debugger can attach to a guest at a time. Virtual CPUs are exposed to the remote debugger as threads. General purpose register values can be read for each virtual CPU. Other registers cannot currently be read, and no register values can be changed by the debugger. The remote debugger can read guest memory but not write to guest memory. To facilitate source-level debugging of the guest, memory addresses from the debugger are treated as virtual addresses (rather than physical addresses) and are resolved to a physical address using the active virtual address translation of the current virtual CPU. Memory reads should honor memory mapped I/O regions, though the debug server does not attempt to honor any alignment or size constraints when accessing MMIO. The debug server provides limited support for controlling the guest. The guest is suspended when a debugger is attached and resumes when a debugger detaches. A debugger can suspend a guest by sending a Ctrl-C request (e.g. via Ctrl-C in GDB). A debugger can also continue a suspended guest while remaining attached. Breakpoints are not yet supported. Single stepping is supported on Intel CPUs that support MTRAP VM exits, but is not available on other systems. While the current debug server has limited functionality, it should at least be usable for basic debugging now. It is also a useful checkpoint to serve as a base for adding additional features. Reviewed by: grehan Differential Revision: https://reviews.freebsd.org/D15022
2018-05-01 15:17:46 +00:00
#include "gdb.h"
#include "ioapic.h"
#include "kernemu_dev.h"
#include "mem.h"
#include "mevent.h"
#include "mptbl.h"
#include "pci_emul.h"
#include "pci_irq.h"
#include "pci_lpc.h"
#include "smbiostbl.h"
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
#include "snapshot.h"
#endif
#include "xmsr.h"
#include "spinup_ap.h"
#include "rtc.h"
#include "vmgenc.h"
#define GUEST_NIO_PORT 0x488 /* guest upcalls via i/o port */
#define MB (1024UL * 1024)
#define GB (1024UL * MB)
static const char * const vmx_exit_reason_desc[] = {
[EXIT_REASON_EXCEPTION] = "Exception or non-maskable interrupt (NMI)",
[EXIT_REASON_EXT_INTR] = "External interrupt",
[EXIT_REASON_TRIPLE_FAULT] = "Triple fault",
[EXIT_REASON_INIT] = "INIT signal",
[EXIT_REASON_SIPI] = "Start-up IPI (SIPI)",
[EXIT_REASON_IO_SMI] = "I/O system-management interrupt (SMI)",
[EXIT_REASON_SMI] = "Other SMI",
[EXIT_REASON_INTR_WINDOW] = "Interrupt window",
[EXIT_REASON_NMI_WINDOW] = "NMI window",
[EXIT_REASON_TASK_SWITCH] = "Task switch",
[EXIT_REASON_CPUID] = "CPUID",
[EXIT_REASON_GETSEC] = "GETSEC",
[EXIT_REASON_HLT] = "HLT",
[EXIT_REASON_INVD] = "INVD",
[EXIT_REASON_INVLPG] = "INVLPG",
[EXIT_REASON_RDPMC] = "RDPMC",
[EXIT_REASON_RDTSC] = "RDTSC",
[EXIT_REASON_RSM] = "RSM",
[EXIT_REASON_VMCALL] = "VMCALL",
[EXIT_REASON_VMCLEAR] = "VMCLEAR",
[EXIT_REASON_VMLAUNCH] = "VMLAUNCH",
[EXIT_REASON_VMPTRLD] = "VMPTRLD",
[EXIT_REASON_VMPTRST] = "VMPTRST",
[EXIT_REASON_VMREAD] = "VMREAD",
[EXIT_REASON_VMRESUME] = "VMRESUME",
[EXIT_REASON_VMWRITE] = "VMWRITE",
[EXIT_REASON_VMXOFF] = "VMXOFF",
[EXIT_REASON_VMXON] = "VMXON",
[EXIT_REASON_CR_ACCESS] = "Control-register accesses",
[EXIT_REASON_DR_ACCESS] = "MOV DR",
[EXIT_REASON_INOUT] = "I/O instruction",
[EXIT_REASON_RDMSR] = "RDMSR",
[EXIT_REASON_WRMSR] = "WRMSR",
[EXIT_REASON_INVAL_VMCS] =
"VM-entry failure due to invalid guest state",
[EXIT_REASON_INVAL_MSR] = "VM-entry failure due to MSR loading",
[EXIT_REASON_MWAIT] = "MWAIT",
[EXIT_REASON_MTF] = "Monitor trap flag",
[EXIT_REASON_MONITOR] = "MONITOR",
[EXIT_REASON_PAUSE] = "PAUSE",
[EXIT_REASON_MCE_DURING_ENTRY] =
"VM-entry failure due to machine-check event",
[EXIT_REASON_TPR] = "TPR below threshold",
[EXIT_REASON_APIC_ACCESS] = "APIC access",
[EXIT_REASON_VIRTUALIZED_EOI] = "Virtualized EOI",
[EXIT_REASON_GDTR_IDTR] = "Access to GDTR or IDTR",
[EXIT_REASON_LDTR_TR] = "Access to LDTR or TR",
[EXIT_REASON_EPT_FAULT] = "EPT violation",
[EXIT_REASON_EPT_MISCONFIG] = "EPT misconfiguration",
[EXIT_REASON_INVEPT] = "INVEPT",
[EXIT_REASON_RDTSCP] = "RDTSCP",
[EXIT_REASON_VMX_PREEMPT] = "VMX-preemption timer expired",
[EXIT_REASON_INVVPID] = "INVVPID",
[EXIT_REASON_WBINVD] = "WBINVD",
[EXIT_REASON_XSETBV] = "XSETBV",
[EXIT_REASON_APIC_WRITE] = "APIC write",
[EXIT_REASON_RDRAND] = "RDRAND",
[EXIT_REASON_INVPCID] = "INVPCID",
[EXIT_REASON_VMFUNC] = "VMFUNC",
[EXIT_REASON_ENCLS] = "ENCLS",
[EXIT_REASON_RDSEED] = "RDSEED",
[EXIT_REASON_PM_LOG_FULL] = "Page-modification log full",
[EXIT_REASON_XSAVES] = "XSAVES",
[EXIT_REASON_XRSTORS] = "XRSTORS"
};
typedef int (*vmexit_handler_t)(struct vmctx *, struct vm_exit *, int *vcpu);
extern int vmexit_task_switch(struct vmctx *, struct vm_exit *, int *vcpu);
int guest_ncpus;
uint16_t cores, maxcpus, sockets, threads;
int raw_stdio = 0;
static char *progname;
static const int BSP = 0;
static cpuset_t cpumask;
static void vm_loop(struct vmctx *ctx, int vcpu, uint64_t rip);
static struct vm_exit vmexit[VM_MAXCPU];
struct bhyvestats {
uint64_t vmexit_bogus;
uint64_t vmexit_reqidle;
uint64_t vmexit_hlt;
uint64_t vmexit_pause;
uint64_t vmexit_mtrap;
uint64_t vmexit_inst_emul;
uint64_t cpu_switch_rotate;
uint64_t cpu_switch_direct;
} stats;
struct mt_vmm_info {
pthread_t mt_thr;
struct vmctx *mt_ctx;
int mt_vcpu;
} mt_vmm_info[VM_MAXCPU];
static cpuset_t *vcpumap[VM_MAXCPU] = { NULL };
static void
usage(int code)
{
fprintf(stderr,
"Usage: %s [-AaCDeHhPSuWwxY]\n"
" %*s [-c [[cpus=]numcpus][,sockets=n][,cores=n][,threads=n]]\n"
" %*s [-G port] [-k file] [-l lpc] [-m mem] [-o var=value]\n"
" %*s [-p vcpu:hostcpu] [-r file] [-s pci] [-U uuid] vmname\n"
" -A: create ACPI tables\n"
" -a: local apic is in xAPIC mode (deprecated)\n"
" -C: include guest memory in core file\n"
" -c: number of CPUs and/or topology specification\n"
" -D: destroy on power-off\n"
" -e: exit on unhandled I/O access\n"
" -G: start a debug server\n"
" -H: vmexit from the guest on HLT\n"
" -h: help\n"
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
" -k: key=value flat config file\n"
" -l: LPC device configuration\n"
" -m: memory size in MB\n"
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
" -o: set config 'var' to 'value'\n"
" -P: vmexit from the guest on pause\n"
" -p: pin 'vcpu' to 'hostcpu'\n"
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
" -r: path to checkpoint file\n"
#endif
" -S: guest memory cannot be swapped\n"
" -s: <slot,driver,configinfo> PCI slot config\n"
" -U: UUID\n"
" -u: RTC keeps UTC time\n"
" -W: force virtio to use single-vector MSI\n"
" -w: ignore unimplemented MSRs\n"
" -x: local APIC is in x2APIC mode\n"
" -Y: disable MPtable generation\n",
progname, (int)strlen(progname), "", (int)strlen(progname), "",
(int)strlen(progname), "");
exit(code);
}
/*
* XXX This parser is known to have the following issues:
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
* 1. It accepts null key=value tokens ",," as setting "cpus" to an
* empty string.
*
* The acceptance of a null specification ('-c ""') is by design to match the
* manual page syntax specification, this results in a topology of 1 vCPU.
*/
static int
topology_parse(const char *opt)
{
char *cp, *str;
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (*opt == '\0') {
set_config_value("sockets", "1");
set_config_value("cores", "1");
set_config_value("threads", "1");
set_config_value("cpus", "1");
return (0);
}
str = strdup(opt);
if (str == NULL)
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
errx(4, "Failed to allocate memory");
while ((cp = strsep(&str, ",")) != NULL) {
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (strncmp(cp, "cpus=", strlen("cpus=")) == 0)
set_config_value("cpus", cp + strlen("cpus="));
else if (strncmp(cp, "sockets=", strlen("sockets=")) == 0)
set_config_value("sockets", cp + strlen("sockets="));
else if (strncmp(cp, "cores=", strlen("cores=")) == 0)
set_config_value("cores", cp + strlen("cores="));
else if (strncmp(cp, "threads=", strlen("threads=")) == 0)
set_config_value("threads", cp + strlen("threads="));
#ifdef notyet /* Do not expose this until vmm.ko implements it */
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
else if (strncmp(cp, "maxcpus=", strlen("maxcpus=")) == 0)
set_config_value("maxcpus", cp + strlen("maxcpus="));
#endif
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
else if (strchr(cp, '=') != NULL)
goto out;
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
else
set_config_value("cpus", cp);
}
free(str);
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
return (0);
out:
free(str);
return (-1);
}
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
static int
parse_int_value(const char *key, const char *value, int minval, int maxval)
{
char *cp;
long lval;
errno = 0;
lval = strtol(value, &cp, 0);
if (errno != 0 || *cp != '\0' || cp == value || lval < minval ||
lval > maxval)
errx(4, "Invalid value for %s: '%s'", key, value);
return (lval);
}
/*
* Set the sockets, cores, threads, and guest_cpus variables based on
* the configured topology.
*
* The limits of UINT16_MAX are due to the types passed to
* vm_set_topology(). vmm.ko may enforce tighter limits.
*/
static void
calc_topolopgy(void)
{
const char *value;
bool explicit_cpus;
uint64_t ncpus;
value = get_config_value("cpus");
if (value != NULL) {
guest_ncpus = parse_int_value("cpus", value, 1, UINT16_MAX);
explicit_cpus = true;
} else {
guest_ncpus = 1;
explicit_cpus = false;
}
value = get_config_value("cores");
if (value != NULL)
cores = parse_int_value("cores", value, 1, UINT16_MAX);
else
cores = 1;
value = get_config_value("threads");
if (value != NULL)
threads = parse_int_value("threads", value, 1, UINT16_MAX);
else
threads = 1;
value = get_config_value("sockets");
if (value != NULL)
sockets = parse_int_value("sockets", value, 1, UINT16_MAX);
else
sockets = guest_ncpus;
/*
* Compute sockets * cores * threads avoiding overflow. The
* range check above insures these are 16 bit values.
*/
ncpus = (uint64_t)sockets * cores * threads;
if (ncpus > UINT16_MAX)
errx(4, "Computed number of vCPUs too high: %ju",
(uintmax_t)ncpus);
if (explicit_cpus) {
if (guest_ncpus != ncpus)
errx(4, "Topology (%d sockets, %d cores, %d threads) "
"does not match %d vCPUs", sockets, cores, threads,
guest_ncpus);
} else
guest_ncpus = ncpus;
}
static int
pincpu_parse(const char *opt)
{
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
const char *value;
char *newval;
char key[16];
int vcpu, pcpu;
if (sscanf(opt, "%d:%d", &vcpu, &pcpu) != 2) {
fprintf(stderr, "invalid format: %s\n", opt);
return (-1);
}
if (vcpu < 0 || vcpu >= VM_MAXCPU) {
fprintf(stderr, "vcpu '%d' outside valid range from 0 to %d\n",
vcpu, VM_MAXCPU - 1);
return (-1);
}
if (pcpu < 0 || pcpu >= CPU_SETSIZE) {
fprintf(stderr, "hostcpu '%d' outside valid range from "
"0 to %d\n", pcpu, CPU_SETSIZE - 1);
return (-1);
}
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
snprintf(key, sizeof(key), "vcpu.%d.cpuset", vcpu);
value = get_config_value(key);
if (asprintf(&newval, "%s%s%d", value != NULL ? value : "",
value != NULL ? "," : "", pcpu) == -1) {
perror("failed to build new cpuset string");
return (-1);
}
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_value(key, newval);
free(newval);
return (0);
}
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
static void
parse_cpuset(int vcpu, const char *list, cpuset_t *set)
{
char *cp, *token;
int pcpu, start;
CPU_ZERO(set);
start = -1;
token = __DECONST(char *, list);
for (;;) {
pcpu = strtoul(token, &cp, 0);
if (cp == token)
errx(4, "invalid cpuset for vcpu %d: '%s'", vcpu, list);
if (pcpu < 0 || pcpu >= CPU_SETSIZE)
errx(4, "hostcpu '%d' outside valid range from 0 to %d",
pcpu, CPU_SETSIZE - 1);
switch (*cp) {
case ',':
case '\0':
if (start >= 0) {
if (start > pcpu)
errx(4, "Invalid hostcpu range %d-%d",
start, pcpu);
while (start < pcpu) {
CPU_SET(start, vcpumap[vcpu]);
start++;
}
start = -1;
}
CPU_SET(pcpu, vcpumap[vcpu]);
break;
case '-':
if (start >= 0)
errx(4, "invalid cpuset for vcpu %d: '%s'",
vcpu, list);
start = pcpu;
break;
default:
errx(4, "invalid cpuset for vcpu %d: '%s'", vcpu, list);
}
if (*cp == '\0')
break;
token = cp + 1;
}
}
static void
build_vcpumaps(void)
{
char key[16];
const char *value;
int vcpu;
for (vcpu = 0; vcpu < guest_ncpus; vcpu++) {
snprintf(key, sizeof(key), "vcpu.%d.cpuset", vcpu);
value = get_config_value(key);
if (value == NULL)
continue;
vcpumap[vcpu] = malloc(sizeof(cpuset_t));
if (vcpumap[vcpu] == NULL)
err(4, "Failed to allocate cpuset for vcpu %d", vcpu);
parse_cpuset(vcpu, value, vcpumap[vcpu]);
}
}
void
vm_inject_fault(void *arg, int vcpu, int vector, int errcode_valid,
int errcode)
{
struct vmctx *ctx;
int error, restart_instruction;
ctx = arg;
restart_instruction = 1;
error = vm_inject_exception(ctx, vcpu, vector, errcode_valid, errcode,
restart_instruction);
assert(error == 0);
}
void *
paddr_guest2host(struct vmctx *ctx, uintptr_t gaddr, size_t len)
{
return (vm_map_gpa(ctx, gaddr, len));
}
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
uintptr_t
paddr_host2guest(struct vmctx *ctx, void *addr)
{
return (vm_rev_map_gpa(ctx, addr));
}
#endif
int
fbsdrun_virtio_msix(void)
{
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
return (get_config_bool_default("virtio_msix", true));
}
static void *
fbsdrun_start_thread(void *param)
{
char tname[MAXCOMLEN + 1];
struct mt_vmm_info *mtp;
int vcpu;
mtp = param;
vcpu = mtp->mt_vcpu;
snprintf(tname, sizeof(tname), "vcpu %d", vcpu);
pthread_set_name_np(mtp->mt_thr, tname);
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
checkpoint_cpu_add(vcpu);
#endif
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
gdb_cpu_add(vcpu);
Initial debug server for bhyve. This commit adds a new debug server to bhyve. Unlike the existing -g option which provides an efficient connection to a debug server running in the guest OS, this debug server permits inspection and control of the guest from within the hypervisor itself without requiring any cooperation from the guest. It is similar to the debug server provided by qemu. To avoid conflicting with the existing -g option, a new -G option has been added that accepts a TCP port. An IPv4 socket is bound to this port and listens for connections from debuggers. In addition, if the port begins with the character 'w', the hypervisor will pause the guest at the first instruction until a debugger attaches and explicitly continues the guest. Note that only a single debugger can attach to a guest at a time. Virtual CPUs are exposed to the remote debugger as threads. General purpose register values can be read for each virtual CPU. Other registers cannot currently be read, and no register values can be changed by the debugger. The remote debugger can read guest memory but not write to guest memory. To facilitate source-level debugging of the guest, memory addresses from the debugger are treated as virtual addresses (rather than physical addresses) and are resolved to a physical address using the active virtual address translation of the current virtual CPU. Memory reads should honor memory mapped I/O regions, though the debug server does not attempt to honor any alignment or size constraints when accessing MMIO. The debug server provides limited support for controlling the guest. The guest is suspended when a debugger is attached and resumes when a debugger detaches. A debugger can suspend a guest by sending a Ctrl-C request (e.g. via Ctrl-C in GDB). A debugger can also continue a suspended guest while remaining attached. Breakpoints are not yet supported. Single stepping is supported on Intel CPUs that support MTRAP VM exits, but is not available on other systems. While the current debug server has limited functionality, it should at least be usable for basic debugging now. It is also a useful checkpoint to serve as a base for adding additional features. Reviewed by: grehan Differential Revision: https://reviews.freebsd.org/D15022
2018-05-01 15:17:46 +00:00
vm_loop(mtp->mt_ctx, vcpu, vmexit[vcpu].rip);
/* not reached */
exit(1);
return (NULL);
}
void
fbsdrun_addcpu(struct vmctx *ctx, int fromcpu, int newcpu, uint64_t rip)
{
int error;
assert(fromcpu == BSP);
/*
* The 'newcpu' must be activated in the context of 'fromcpu'. If
* vm_activate_cpu() is delayed until newcpu's pthread starts running
* then vmm.ko is out-of-sync with bhyve and this can create a race
* with vm_suspend().
*/
error = vm_activate_cpu(ctx, newcpu);
if (error != 0)
err(EX_OSERR, "could not activate CPU %d", newcpu);
CPU_SET_ATOMIC(newcpu, &cpumask);
/*
* Set up the vmexit struct to allow execution to start
* at the given RIP
*/
vmexit[newcpu].rip = rip;
vmexit[newcpu].inst_length = 0;
mt_vmm_info[newcpu].mt_ctx = ctx;
mt_vmm_info[newcpu].mt_vcpu = newcpu;
error = pthread_create(&mt_vmm_info[newcpu].mt_thr, NULL,
fbsdrun_start_thread, &mt_vmm_info[newcpu]);
assert(error == 0);
}
static int
fbsdrun_deletecpu(struct vmctx *ctx, int vcpu)
{
if (!CPU_ISSET(vcpu, &cpumask)) {
fprintf(stderr, "Attempting to delete unknown cpu %d\n", vcpu);
exit(4);
}
CPU_CLR_ATOMIC(vcpu, &cpumask);
return (CPU_EMPTY(&cpumask));
}
static int
vmexit_handle_notify(struct vmctx *ctx, struct vm_exit *vme, int *pvcpu,
uint32_t eax)
{
#if BHYVE_DEBUG
/*
* put guest-driven debug here
*/
#endif
return (VMEXIT_CONTINUE);
}
static int
vmexit_inout(struct vmctx *ctx, struct vm_exit *vme, int *pvcpu)
{
int error;
int bytes, port, in, out;
int vcpu;
vcpu = *pvcpu;
port = vme->u.inout.port;
bytes = vme->u.inout.bytes;
in = vme->u.inout.in;
out = !in;
/* Extra-special case of host notifications */
if (out && port == GUEST_NIO_PORT) {
error = vmexit_handle_notify(ctx, vme, pvcpu, vme->u.inout.eax);
return (error);
}
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
error = emulate_inout(ctx, vcpu, vme);
if (error) {
fprintf(stderr, "Unhandled %s%c 0x%04x at 0x%lx\n",
in ? "in" : "out",
bytes == 1 ? 'b' : (bytes == 2 ? 'w' : 'l'),
port, vmexit->rip);
return (VMEXIT_ABORT);
} else {
return (VMEXIT_CONTINUE);
}
}
static int
vmexit_rdmsr(struct vmctx *ctx, struct vm_exit *vme, int *pvcpu)
{
uint64_t val;
uint32_t eax, edx;
int error;
val = 0;
error = emulate_rdmsr(ctx, *pvcpu, vme->u.msr.code, &val);
if (error != 0) {
fprintf(stderr, "rdmsr to register %#x on vcpu %d\n",
vme->u.msr.code, *pvcpu);
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (get_config_bool("x86.strictmsr")) {
vm_inject_gp(ctx, *pvcpu);
return (VMEXIT_CONTINUE);
}
}
eax = val;
error = vm_set_register(ctx, *pvcpu, VM_REG_GUEST_RAX, eax);
assert(error == 0);
edx = val >> 32;
error = vm_set_register(ctx, *pvcpu, VM_REG_GUEST_RDX, edx);
assert(error == 0);
return (VMEXIT_CONTINUE);
}
static int
vmexit_wrmsr(struct vmctx *ctx, struct vm_exit *vme, int *pvcpu)
{
int error;
error = emulate_wrmsr(ctx, *pvcpu, vme->u.msr.code, vme->u.msr.wval);
if (error != 0) {
fprintf(stderr, "wrmsr to register %#x(%#lx) on vcpu %d\n",
vme->u.msr.code, vme->u.msr.wval, *pvcpu);
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (get_config_bool("x86.strictmsr")) {
vm_inject_gp(ctx, *pvcpu);
return (VMEXIT_CONTINUE);
}
}
return (VMEXIT_CONTINUE);
}
static int
vmexit_spinup_ap(struct vmctx *ctx, struct vm_exit *vme, int *pvcpu)
{
(void)spinup_ap(ctx, *pvcpu,
vme->u.spinup_ap.vcpu, vme->u.spinup_ap.rip);
return (VMEXIT_CONTINUE);
}
#define DEBUG_EPT_MISCONFIG
#ifdef DEBUG_EPT_MISCONFIG
#define VMCS_GUEST_PHYSICAL_ADDRESS 0x00002400
static uint64_t ept_misconfig_gpa, ept_misconfig_pte[4];
static int ept_misconfig_ptenum;
#endif
static const char *
vmexit_vmx_desc(uint32_t exit_reason)
{
if (exit_reason >= nitems(vmx_exit_reason_desc) ||
vmx_exit_reason_desc[exit_reason] == NULL)
return ("Unknown");
return (vmx_exit_reason_desc[exit_reason]);
}
static int
vmexit_vmx(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
fprintf(stderr, "vm exit[%d]\n", *pvcpu);
fprintf(stderr, "\treason\t\tVMX\n");
fprintf(stderr, "\trip\t\t0x%016lx\n", vmexit->rip);
fprintf(stderr, "\tinst_length\t%d\n", vmexit->inst_length);
fprintf(stderr, "\tstatus\t\t%d\n", vmexit->u.vmx.status);
fprintf(stderr, "\texit_reason\t%u (%s)\n", vmexit->u.vmx.exit_reason,
vmexit_vmx_desc(vmexit->u.vmx.exit_reason));
fprintf(stderr, "\tqualification\t0x%016lx\n",
vmexit->u.vmx.exit_qualification);
fprintf(stderr, "\tinst_type\t\t%d\n", vmexit->u.vmx.inst_type);
fprintf(stderr, "\tinst_error\t\t%d\n", vmexit->u.vmx.inst_error);
#ifdef DEBUG_EPT_MISCONFIG
if (vmexit->u.vmx.exit_reason == EXIT_REASON_EPT_MISCONFIG) {
vm_get_register(ctx, *pvcpu,
VMCS_IDENT(VMCS_GUEST_PHYSICAL_ADDRESS),
&ept_misconfig_gpa);
vm_get_gpa_pmap(ctx, ept_misconfig_gpa, ept_misconfig_pte,
&ept_misconfig_ptenum);
fprintf(stderr, "\tEPT misconfiguration:\n");
fprintf(stderr, "\t\tGPA: %#lx\n", ept_misconfig_gpa);
fprintf(stderr, "\t\tPTE(%d): %#lx %#lx %#lx %#lx\n",
ept_misconfig_ptenum, ept_misconfig_pte[0],
ept_misconfig_pte[1], ept_misconfig_pte[2],
ept_misconfig_pte[3]);
}
#endif /* DEBUG_EPT_MISCONFIG */
return (VMEXIT_ABORT);
}
static int
vmexit_svm(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
fprintf(stderr, "vm exit[%d]\n", *pvcpu);
fprintf(stderr, "\treason\t\tSVM\n");
fprintf(stderr, "\trip\t\t0x%016lx\n", vmexit->rip);
fprintf(stderr, "\tinst_length\t%d\n", vmexit->inst_length);
fprintf(stderr, "\texitcode\t%#lx\n", vmexit->u.svm.exitcode);
fprintf(stderr, "\texitinfo1\t%#lx\n", vmexit->u.svm.exitinfo1);
fprintf(stderr, "\texitinfo2\t%#lx\n", vmexit->u.svm.exitinfo2);
return (VMEXIT_ABORT);
}
static int
vmexit_bogus(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
assert(vmexit->inst_length == 0);
stats.vmexit_bogus++;
return (VMEXIT_CONTINUE);
}
static int
vmexit_reqidle(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
assert(vmexit->inst_length == 0);
stats.vmexit_reqidle++;
return (VMEXIT_CONTINUE);
}
static int
vmexit_hlt(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
stats.vmexit_hlt++;
/*
* Just continue execution with the next instruction. We use
* the HLT VM exit as a way to be friendly with the host
* scheduler.
*/
return (VMEXIT_CONTINUE);
}
static int
vmexit_pause(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
stats.vmexit_pause++;
return (VMEXIT_CONTINUE);
}
static int
vmexit_mtrap(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
assert(vmexit->inst_length == 0);
stats.vmexit_mtrap++;
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
checkpoint_cpu_suspend(*pvcpu);
#endif
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
gdb_cpu_mtrap(*pvcpu);
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
checkpoint_cpu_resume(*pvcpu);
#endif
return (VMEXIT_CONTINUE);
}
static int
vmexit_inst_emul(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
int err, i, cs_d;
struct vie *vie;
enum vm_cpu_mode mode;
stats.vmexit_inst_emul++;
vie = &vmexit->u.inst_emul.vie;
if (!vie->decoded) {
/*
* Attempt to decode in userspace as a fallback. This allows
* updating instruction decode in bhyve without rebooting the
* kernel (rapid prototyping), albeit with much slower
* emulation.
*/
vie_restart(vie);
mode = vmexit->u.inst_emul.paging.cpu_mode;
cs_d = vmexit->u.inst_emul.cs_d;
if (vmm_decode_instruction(mode, cs_d, vie) != 0)
goto fail;
if (vm_set_register(ctx, *pvcpu, VM_REG_GUEST_RIP,
vmexit->rip + vie->num_processed) != 0)
goto fail;
}
err = emulate_mem(ctx, *pvcpu, vmexit->u.inst_emul.gpa,
vie, &vmexit->u.inst_emul.paging);
if (err) {
if (err == ESRCH) {
EPRINTLN("Unhandled memory access to 0x%lx\n",
vmexit->u.inst_emul.gpa);
}
goto fail;
}
return (VMEXIT_CONTINUE);
fail:
fprintf(stderr, "Failed to emulate instruction sequence [ ");
for (i = 0; i < vie->num_valid; i++)
fprintf(stderr, "%02x", vie->inst[i]);
FPRINTLN(stderr, " ] at 0x%lx", vmexit->rip);
return (VMEXIT_ABORT);
}
static pthread_mutex_t resetcpu_mtx = PTHREAD_MUTEX_INITIALIZER;
static pthread_cond_t resetcpu_cond = PTHREAD_COND_INITIALIZER;
static int
vmexit_suspend(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
enum vm_suspend_how how;
how = vmexit->u.suspended.how;
fbsdrun_deletecpu(ctx, *pvcpu);
if (*pvcpu != BSP) {
pthread_mutex_lock(&resetcpu_mtx);
pthread_cond_signal(&resetcpu_cond);
pthread_mutex_unlock(&resetcpu_mtx);
pthread_exit(NULL);
}
pthread_mutex_lock(&resetcpu_mtx);
while (!CPU_EMPTY(&cpumask)) {
pthread_cond_wait(&resetcpu_cond, &resetcpu_mtx);
}
pthread_mutex_unlock(&resetcpu_mtx);
switch (how) {
case VM_SUSPEND_RESET:
exit(0);
case VM_SUSPEND_POWEROFF:
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (get_config_bool_default("destroy_on_poweroff", false))
vm_destroy(ctx);
exit(1);
case VM_SUSPEND_HALT:
exit(2);
case VM_SUSPEND_TRIPLEFAULT:
exit(3);
default:
fprintf(stderr, "vmexit_suspend: invalid reason %d\n", how);
exit(100);
}
return (0); /* NOTREACHED */
}
Initial debug server for bhyve. This commit adds a new debug server to bhyve. Unlike the existing -g option which provides an efficient connection to a debug server running in the guest OS, this debug server permits inspection and control of the guest from within the hypervisor itself without requiring any cooperation from the guest. It is similar to the debug server provided by qemu. To avoid conflicting with the existing -g option, a new -G option has been added that accepts a TCP port. An IPv4 socket is bound to this port and listens for connections from debuggers. In addition, if the port begins with the character 'w', the hypervisor will pause the guest at the first instruction until a debugger attaches and explicitly continues the guest. Note that only a single debugger can attach to a guest at a time. Virtual CPUs are exposed to the remote debugger as threads. General purpose register values can be read for each virtual CPU. Other registers cannot currently be read, and no register values can be changed by the debugger. The remote debugger can read guest memory but not write to guest memory. To facilitate source-level debugging of the guest, memory addresses from the debugger are treated as virtual addresses (rather than physical addresses) and are resolved to a physical address using the active virtual address translation of the current virtual CPU. Memory reads should honor memory mapped I/O regions, though the debug server does not attempt to honor any alignment or size constraints when accessing MMIO. The debug server provides limited support for controlling the guest. The guest is suspended when a debugger is attached and resumes when a debugger detaches. A debugger can suspend a guest by sending a Ctrl-C request (e.g. via Ctrl-C in GDB). A debugger can also continue a suspended guest while remaining attached. Breakpoints are not yet supported. Single stepping is supported on Intel CPUs that support MTRAP VM exits, but is not available on other systems. While the current debug server has limited functionality, it should at least be usable for basic debugging now. It is also a useful checkpoint to serve as a base for adding additional features. Reviewed by: grehan Differential Revision: https://reviews.freebsd.org/D15022
2018-05-01 15:17:46 +00:00
static int
vmexit_debug(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
checkpoint_cpu_suspend(*pvcpu);
#endif
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
gdb_cpu_suspend(*pvcpu);
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
checkpoint_cpu_resume(*pvcpu);
#endif
Initial debug server for bhyve. This commit adds a new debug server to bhyve. Unlike the existing -g option which provides an efficient connection to a debug server running in the guest OS, this debug server permits inspection and control of the guest from within the hypervisor itself without requiring any cooperation from the guest. It is similar to the debug server provided by qemu. To avoid conflicting with the existing -g option, a new -G option has been added that accepts a TCP port. An IPv4 socket is bound to this port and listens for connections from debuggers. In addition, if the port begins with the character 'w', the hypervisor will pause the guest at the first instruction until a debugger attaches and explicitly continues the guest. Note that only a single debugger can attach to a guest at a time. Virtual CPUs are exposed to the remote debugger as threads. General purpose register values can be read for each virtual CPU. Other registers cannot currently be read, and no register values can be changed by the debugger. The remote debugger can read guest memory but not write to guest memory. To facilitate source-level debugging of the guest, memory addresses from the debugger are treated as virtual addresses (rather than physical addresses) and are resolved to a physical address using the active virtual address translation of the current virtual CPU. Memory reads should honor memory mapped I/O regions, though the debug server does not attempt to honor any alignment or size constraints when accessing MMIO. The debug server provides limited support for controlling the guest. The guest is suspended when a debugger is attached and resumes when a debugger detaches. A debugger can suspend a guest by sending a Ctrl-C request (e.g. via Ctrl-C in GDB). A debugger can also continue a suspended guest while remaining attached. Breakpoints are not yet supported. Single stepping is supported on Intel CPUs that support MTRAP VM exits, but is not available on other systems. While the current debug server has limited functionality, it should at least be usable for basic debugging now. It is also a useful checkpoint to serve as a base for adding additional features. Reviewed by: grehan Differential Revision: https://reviews.freebsd.org/D15022
2018-05-01 15:17:46 +00:00
return (VMEXIT_CONTINUE);
}
2019-12-13 19:21:58 +00:00
static int
vmexit_breakpoint(struct vmctx *ctx, struct vm_exit *vmexit, int *pvcpu)
{
gdb_cpu_breakpoint(*pvcpu, vmexit);
return (VMEXIT_CONTINUE);
}
static vmexit_handler_t handler[VM_EXITCODE_MAX] = {
[VM_EXITCODE_INOUT] = vmexit_inout,
[VM_EXITCODE_INOUT_STR] = vmexit_inout,
[VM_EXITCODE_VMX] = vmexit_vmx,
[VM_EXITCODE_SVM] = vmexit_svm,
[VM_EXITCODE_BOGUS] = vmexit_bogus,
[VM_EXITCODE_REQIDLE] = vmexit_reqidle,
[VM_EXITCODE_RDMSR] = vmexit_rdmsr,
[VM_EXITCODE_WRMSR] = vmexit_wrmsr,
[VM_EXITCODE_MTRAP] = vmexit_mtrap,
[VM_EXITCODE_INST_EMUL] = vmexit_inst_emul,
[VM_EXITCODE_SPINUP_AP] = vmexit_spinup_ap,
[VM_EXITCODE_SUSPENDED] = vmexit_suspend,
[VM_EXITCODE_TASK_SWITCH] = vmexit_task_switch,
Initial debug server for bhyve. This commit adds a new debug server to bhyve. Unlike the existing -g option which provides an efficient connection to a debug server running in the guest OS, this debug server permits inspection and control of the guest from within the hypervisor itself without requiring any cooperation from the guest. It is similar to the debug server provided by qemu. To avoid conflicting with the existing -g option, a new -G option has been added that accepts a TCP port. An IPv4 socket is bound to this port and listens for connections from debuggers. In addition, if the port begins with the character 'w', the hypervisor will pause the guest at the first instruction until a debugger attaches and explicitly continues the guest. Note that only a single debugger can attach to a guest at a time. Virtual CPUs are exposed to the remote debugger as threads. General purpose register values can be read for each virtual CPU. Other registers cannot currently be read, and no register values can be changed by the debugger. The remote debugger can read guest memory but not write to guest memory. To facilitate source-level debugging of the guest, memory addresses from the debugger are treated as virtual addresses (rather than physical addresses) and are resolved to a physical address using the active virtual address translation of the current virtual CPU. Memory reads should honor memory mapped I/O regions, though the debug server does not attempt to honor any alignment or size constraints when accessing MMIO. The debug server provides limited support for controlling the guest. The guest is suspended when a debugger is attached and resumes when a debugger detaches. A debugger can suspend a guest by sending a Ctrl-C request (e.g. via Ctrl-C in GDB). A debugger can also continue a suspended guest while remaining attached. Breakpoints are not yet supported. Single stepping is supported on Intel CPUs that support MTRAP VM exits, but is not available on other systems. While the current debug server has limited functionality, it should at least be usable for basic debugging now. It is also a useful checkpoint to serve as a base for adding additional features. Reviewed by: grehan Differential Revision: https://reviews.freebsd.org/D15022
2018-05-01 15:17:46 +00:00
[VM_EXITCODE_DEBUG] = vmexit_debug,
2019-12-13 19:21:58 +00:00
[VM_EXITCODE_BPT] = vmexit_breakpoint,
};
static void
vm_loop(struct vmctx *ctx, int vcpu, uint64_t startrip)
{
int error, rc;
enum vm_exitcode exitcode;
cpuset_t active_cpus;
if (vcpumap[vcpu] != NULL) {
error = pthread_setaffinity_np(pthread_self(),
sizeof(cpuset_t), vcpumap[vcpu]);
assert(error == 0);
}
error = vm_active_cpus(ctx, &active_cpus);
assert(CPU_ISSET(vcpu, &active_cpus));
error = vm_set_register(ctx, vcpu, VM_REG_GUEST_RIP, startrip);
assert(error == 0);
while (1) {
error = vm_run(ctx, vcpu, &vmexit[vcpu]);
if (error != 0)
break;
exitcode = vmexit[vcpu].exitcode;
if (exitcode >= VM_EXITCODE_MAX || handler[exitcode] == NULL) {
fprintf(stderr, "vm_loop: unexpected exitcode 0x%x\n",
exitcode);
exit(4);
}
rc = (*handler[exitcode])(ctx, &vmexit[vcpu], &vcpu);
switch (rc) {
case VMEXIT_CONTINUE:
break;
case VMEXIT_ABORT:
abort();
default:
exit(4);
}
}
fprintf(stderr, "vm_run error %d, errno %d\n", error, errno);
}
static int
num_vcpus_allowed(struct vmctx *ctx)
{
int tmp, error;
error = vm_get_capability(ctx, BSP, VM_CAP_UNRESTRICTED_GUEST, &tmp);
/*
* The guest is allowed to spinup more than one processor only if the
* UNRESTRICTED_GUEST capability is available.
*/
if (error == 0)
return (VM_MAXCPU);
else
return (1);
}
void
fbsdrun_set_capabilities(struct vmctx *ctx, int cpu)
{
int err, tmp;
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (get_config_bool_default("x86.vmexit_on_hlt", false)) {
err = vm_get_capability(ctx, cpu, VM_CAP_HALT_EXIT, &tmp);
if (err < 0) {
fprintf(stderr, "VM exit on HLT not supported\n");
exit(4);
}
vm_set_capability(ctx, cpu, VM_CAP_HALT_EXIT, 1);
if (cpu == BSP)
handler[VM_EXITCODE_HLT] = vmexit_hlt;
}
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (get_config_bool_default("x86.vmexit_on_pause", false)) {
/*
* pause exit support required for this mode
*/
err = vm_get_capability(ctx, cpu, VM_CAP_PAUSE_EXIT, &tmp);
if (err < 0) {
fprintf(stderr,
"SMP mux requested, no pause support\n");
exit(4);
}
vm_set_capability(ctx, cpu, VM_CAP_PAUSE_EXIT, 1);
if (cpu == BSP)
handler[VM_EXITCODE_PAUSE] = vmexit_pause;
}
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (get_config_bool_default("x86.x2apic", false))
err = vm_set_x2apic_state(ctx, cpu, X2APIC_ENABLED);
else
err = vm_set_x2apic_state(ctx, cpu, X2APIC_DISABLED);
if (err) {
fprintf(stderr, "Unable to set x2apic state (%d)\n", err);
exit(4);
}
vm_set_capability(ctx, cpu, VM_CAP_ENABLE_INVPCID, 1);
}
static struct vmctx *
do_open(const char *vmname)
{
struct vmctx *ctx;
int error;
bool reinit, romboot;
#ifndef WITHOUT_CAPSICUM
cap_rights_t rights;
const cap_ioctl_t *cmds;
size_t ncmds;
#endif
reinit = romboot = false;
if (lpc_bootrom())
romboot = true;
error = vm_create(vmname);
if (error) {
if (errno == EEXIST) {
if (romboot) {
reinit = true;
} else {
/*
* The virtual machine has been setup by the
* userspace bootloader.
*/
}
} else {
perror("vm_create");
exit(4);
}
} else {
if (!romboot) {
/*
* If the virtual machine was just created then a
* bootrom must be configured to boot it.
*/
fprintf(stderr, "virtual machine cannot be booted\n");
exit(4);
}
}
ctx = vm_open(vmname);
if (ctx == NULL) {
perror("vm_open");
exit(4);
}
#ifndef WITHOUT_CAPSICUM
cap_rights_init(&rights, CAP_IOCTL, CAP_MMAP_RW);
if (caph_rights_limit(vm_get_device_fd(ctx), &rights) == -1)
errx(EX_OSERR, "Unable to apply rights for sandbox");
vm_get_ioctls(&ncmds);
cmds = vm_get_ioctls(NULL);
if (cmds == NULL)
errx(EX_OSERR, "out of memory");
if (caph_ioctls_limit(vm_get_device_fd(ctx), cmds, ncmds) == -1)
errx(EX_OSERR, "Unable to apply rights for sandbox");
free((cap_ioctl_t *)cmds);
#endif
if (reinit) {
error = vm_reinit(ctx);
if (error) {
perror("vm_reinit");
exit(4);
}
}
error = vm_set_topology(ctx, sockets, cores, threads, maxcpus);
if (error)
errx(EX_OSERR, "vm_set_topology");
return (ctx);
}
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
void
spinup_vcpu(struct vmctx *ctx, int vcpu)
{
int error;
uint64_t rip;
error = vm_get_register(ctx, vcpu, VM_REG_GUEST_RIP, &rip);
assert(error == 0);
fbsdrun_set_capabilities(ctx, vcpu);
error = vm_set_capability(ctx, vcpu, VM_CAP_UNRESTRICTED_GUEST, 1);
assert(error == 0);
fbsdrun_addcpu(ctx, BSP, vcpu, rip);
}
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
static bool
parse_config_option(const char *option)
{
const char *value;
char *path;
value = strchr(option, '=');
if (value == NULL || value[1] == '\0')
return (false);
path = strndup(option, value - option);
if (path == NULL)
err(4, "Failed to allocate memory");
set_config_value(path, value + 1);
return (true);
}
static void
parse_simple_config_file(const char *path)
{
FILE *fp;
char *line, *cp;
size_t linecap;
unsigned int lineno;
fp = fopen(path, "r");
if (fp == NULL)
err(4, "Failed to open configuration file %s", path);
line = NULL;
linecap = 0;
lineno = 1;
for (lineno = 1; getline(&line, &linecap, fp) > 0; lineno++) {
if (*line == '#' || *line == '\n')
continue;
cp = strchr(line, '\n');
if (cp != NULL)
*cp = '\0';
if (!parse_config_option(line))
errx(4, "%s line %u: invalid config option '%s'", path,
lineno, line);
}
free(line);
fclose(fp);
}
static void
set_defaults(void)
{
set_config_bool("acpi_tables", false);
set_config_value("memory.size", "256M");
set_config_bool("x86.strictmsr", true);
}
int
main(int argc, char *argv[])
{
int c, error, err;
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
int max_vcpus, memflags;
struct vmctx *ctx;
uint64_t rip;
size_t memsize;
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
const char *value, *vmname;
char *optstr;
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
char *restore_file;
struct restore_state rstate;
int vcpu;
restore_file = NULL;
#endif
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
init_config();
set_defaults();
progname = basename(argv[0]);
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
optstr = "aehuwxACDHIPSWYk:o:p:G:c:s:m:l:U:r:";
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#else
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
optstr = "aehuwxACDHIPSWYk:o:p:G:c:s:m:l:U:";
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#endif
while ((c = getopt(argc, argv, optstr)) != -1) {
switch (c) {
case 'a':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("x86.x2apic", false);
break;
case 'A':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("acpi_tables", true);
break;
case 'D':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("destroy_on_poweroff", true);
break;
case 'p':
if (pincpu_parse(optarg) != 0) {
errx(EX_USAGE, "invalid vcpu pinning "
"configuration '%s'", optarg);
}
break;
case 'c':
if (topology_parse(optarg) != 0) {
errx(EX_USAGE, "invalid cpu topology "
"'%s'", optarg);
}
break;
case 'C':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("memory.guest_in_core", true);
break;
Initial debug server for bhyve. This commit adds a new debug server to bhyve. Unlike the existing -g option which provides an efficient connection to a debug server running in the guest OS, this debug server permits inspection and control of the guest from within the hypervisor itself without requiring any cooperation from the guest. It is similar to the debug server provided by qemu. To avoid conflicting with the existing -g option, a new -G option has been added that accepts a TCP port. An IPv4 socket is bound to this port and listens for connections from debuggers. In addition, if the port begins with the character 'w', the hypervisor will pause the guest at the first instruction until a debugger attaches and explicitly continues the guest. Note that only a single debugger can attach to a guest at a time. Virtual CPUs are exposed to the remote debugger as threads. General purpose register values can be read for each virtual CPU. Other registers cannot currently be read, and no register values can be changed by the debugger. The remote debugger can read guest memory but not write to guest memory. To facilitate source-level debugging of the guest, memory addresses from the debugger are treated as virtual addresses (rather than physical addresses) and are resolved to a physical address using the active virtual address translation of the current virtual CPU. Memory reads should honor memory mapped I/O regions, though the debug server does not attempt to honor any alignment or size constraints when accessing MMIO. The debug server provides limited support for controlling the guest. The guest is suspended when a debugger is attached and resumes when a debugger detaches. A debugger can suspend a guest by sending a Ctrl-C request (e.g. via Ctrl-C in GDB). A debugger can also continue a suspended guest while remaining attached. Breakpoints are not yet supported. Single stepping is supported on Intel CPUs that support MTRAP VM exits, but is not available on other systems. While the current debug server has limited functionality, it should at least be usable for basic debugging now. It is also a useful checkpoint to serve as a base for adding additional features. Reviewed by: grehan Differential Revision: https://reviews.freebsd.org/D15022
2018-05-01 15:17:46 +00:00
case 'G':
if (optarg[0] == 'w') {
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("gdb.wait", true);
Initial debug server for bhyve. This commit adds a new debug server to bhyve. Unlike the existing -g option which provides an efficient connection to a debug server running in the guest OS, this debug server permits inspection and control of the guest from within the hypervisor itself without requiring any cooperation from the guest. It is similar to the debug server provided by qemu. To avoid conflicting with the existing -g option, a new -G option has been added that accepts a TCP port. An IPv4 socket is bound to this port and listens for connections from debuggers. In addition, if the port begins with the character 'w', the hypervisor will pause the guest at the first instruction until a debugger attaches and explicitly continues the guest. Note that only a single debugger can attach to a guest at a time. Virtual CPUs are exposed to the remote debugger as threads. General purpose register values can be read for each virtual CPU. Other registers cannot currently be read, and no register values can be changed by the debugger. The remote debugger can read guest memory but not write to guest memory. To facilitate source-level debugging of the guest, memory addresses from the debugger are treated as virtual addresses (rather than physical addresses) and are resolved to a physical address using the active virtual address translation of the current virtual CPU. Memory reads should honor memory mapped I/O regions, though the debug server does not attempt to honor any alignment or size constraints when accessing MMIO. The debug server provides limited support for controlling the guest. The guest is suspended when a debugger is attached and resumes when a debugger detaches. A debugger can suspend a guest by sending a Ctrl-C request (e.g. via Ctrl-C in GDB). A debugger can also continue a suspended guest while remaining attached. Breakpoints are not yet supported. Single stepping is supported on Intel CPUs that support MTRAP VM exits, but is not available on other systems. While the current debug server has limited functionality, it should at least be usable for basic debugging now. It is also a useful checkpoint to serve as a base for adding additional features. Reviewed by: grehan Differential Revision: https://reviews.freebsd.org/D15022
2018-05-01 15:17:46 +00:00
optarg++;
}
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_value("gdb.port", optarg);
break;
case 'k':
parse_simple_config_file(optarg);
break;
case 'l':
if (strncmp(optarg, "help", strlen(optarg)) == 0) {
lpc_print_supported_devices();
exit(0);
} else if (lpc_device_parse(optarg) != 0) {
errx(EX_USAGE, "invalid lpc device "
"configuration '%s'", optarg);
}
break;
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
case 'r':
restore_file = optarg;
break;
#endif
case 's':
if (strncmp(optarg, "help", strlen(optarg)) == 0) {
pci_print_supported_devices();
exit(0);
} else if (pci_parse_slot(optarg) != 0)
exit(4);
else
break;
case 'S':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("memory.wired", true);
break;
case 'm':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_value("memory.size", optarg);
break;
case 'o':
if (!parse_config_option(optarg))
errx(EX_USAGE, "invalid configuration option '%s'", optarg);
break;
case 'H':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("x86.vmexit_on_hlt", true);
break;
case 'I':
/*
* The "-I" option was used to add an ioapic to the
* virtual machine.
*
* An ioapic is now provided unconditionally for each
* virtual machine and this option is now deprecated.
*/
break;
case 'P':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("x86.vmexit_on_pause", true);
break;
case 'e':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("x86.strictio", true);
break;
case 'u':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("rtc.use_localtime", false);
break;
case 'U':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_value("uuid", optarg);
break;
case 'w':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("x86.strictmsr", false);
break;
case 'W':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("virtio_msix", false);
break;
case 'x':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("x86.x2apic", true);
break;
case 'Y':
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
set_config_bool("x86.mptable", false);
break;
case 'h':
usage(0);
default:
usage(1);
}
}
argc -= optind;
argv += optind;
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (argc > 1)
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
usage(1);
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
#ifdef BHYVE_SNAPSHOT
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
if (restore_file != NULL) {
error = load_restore_file(restore_file, &rstate);
if (error) {
fprintf(stderr, "Failed to read checkpoint info from "
"file: '%s'.\n", restore_file);
exit(1);
}
vmname = lookup_vmname(&rstate);
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (vmname != NULL)
set_config_value("name", vmname);
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
}
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
#endif
if (argc == 1)
set_config_value("name", argv[0]);
vmname = get_config_value("name");
if (vmname == NULL)
usage(1);
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (get_config_bool_default("config.dump", false)) {
dump_config();
exit(1);
}
calc_topolopgy();
build_vcpumaps();
value = get_config_value("memory.size");
error = vm_parse_memsize(value, &memsize);
if (error)
errx(EX_USAGE, "invalid memsize '%s'", value);
ctx = do_open(vmname);
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
if (restore_file != NULL) {
guest_ncpus = lookup_guest_ncpus(&rstate);
memflags = lookup_memflags(&rstate);
memsize = lookup_memsize(&rstate);
}
if (guest_ncpus < 1) {
fprintf(stderr, "Invalid guest vCPUs (%d)\n", guest_ncpus);
exit(1);
}
#endif
max_vcpus = num_vcpus_allowed(ctx);
if (guest_ncpus > max_vcpus) {
fprintf(stderr, "%d vCPUs requested but only %d available\n",
guest_ncpus, max_vcpus);
exit(4);
}
fbsdrun_set_capabilities(ctx, BSP);
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
memflags = 0;
if (get_config_bool_default("memory.wired", false))
memflags |= VM_MEM_F_WIRED;
if (get_config_bool_default("memory.guest_in_core", false))
memflags |= VM_MEM_F_INCORE;
vm_set_memflags(ctx, memflags);
err = vm_setup_memory(ctx, memsize, VM_MMAP_ALL);
if (err) {
fprintf(stderr, "Unable to setup memory (%d)\n", errno);
exit(4);
}
error = init_msr();
if (error) {
fprintf(stderr, "init_msr error %d", error);
exit(4);
}
init_mem();
init_inout();
kernemu_dev_init();
init_bootrom(ctx);
atkbdc_init(ctx);
pci_irq_init(ctx);
ioapic_init(ctx);
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
rtc_init(ctx);
sci_init(ctx);
/*
* Exit if a device emulation finds an error in its initilization
*/
if (init_pci(ctx) != 0) {
perror("device emulation initialization error");
exit(4);
}
/*
* Initialize after PCI, to allow a bootrom file to reserve the high
* region.
*/
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (get_config_bool("acpi_tables"))
vmgenc_init(ctx);
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
value = get_config_value("gdb.port");
if (value != NULL)
init_gdb(ctx, atoi(value), get_config_bool_default("gdb.wait",
false));
if (lpc_bootrom()) {
if (vm_set_capability(ctx, BSP, VM_CAP_UNRESTRICTED_GUEST, 1)) {
fprintf(stderr, "ROM boot failed: unrestricted guest "
"capability not available\n");
exit(4);
}
error = vcpu_reset(ctx, BSP);
assert(error == 0);
}
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
if (restore_file != NULL) {
fprintf(stdout, "Pausing pci devs...\r\n");
if (vm_pause_user_devs(ctx) != 0) {
fprintf(stderr, "Failed to pause PCI device state.\n");
exit(1);
}
fprintf(stdout, "Restoring vm mem...\r\n");
if (restore_vm_mem(ctx, &rstate) != 0) {
fprintf(stderr, "Failed to restore VM memory.\n");
exit(1);
}
fprintf(stdout, "Restoring pci devs...\r\n");
if (vm_restore_user_devs(ctx, &rstate) != 0) {
fprintf(stderr, "Failed to restore PCI device state.\n");
exit(1);
}
fprintf(stdout, "Restoring kernel structs...\r\n");
if (vm_restore_kern_structs(ctx, &rstate) != 0) {
fprintf(stderr, "Failed to restore kernel structs.\n");
exit(1);
}
fprintf(stdout, "Resuming pci devs...\r\n");
if (vm_resume_user_devs(ctx) != 0) {
fprintf(stderr, "Failed to resume PCI device state.\n");
exit(1);
}
}
#endif
error = vm_get_register(ctx, BSP, VM_REG_GUEST_RIP, &rip);
assert(error == 0);
/*
* build the guest tables, MP etc.
*/
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (get_config_bool_default("x86.mptable", true)) {
error = mptable_build(ctx, guest_ncpus);
if (error) {
perror("error to build the guest tables");
exit(4);
}
}
error = smbios_build(ctx);
assert(error == 0);
Refactor configuration management in bhyve. Replace the existing ad-hoc configuration via various global variables with a small database of key-value pairs. The database supports heirarchical keys using a MIB-like syntax to name the path to a given key. Values are always stored as strings. The API used to manage configuation values does include wrappers to handling boolean values. Other values use non-string types require parsing by consumers. The configuration values are stored in a tree using nvlists. Leaf nodes hold string values. Configuration values are permitted to reference other configuration values using '%(name)'. This permits constructing template configurations. All existing command line arguments now set configuration values. For devices, the "-s" option parses its option argument to generate a list of key-value pairs for the given device. A new '-o' command line option permits setting an individual configuration variable. The key name is always given as a full path of dot-separated components. A new '-k' command line option parses a simple configuration file. This configuration file holds a flat list of 'key=value' lines where the 'key' is the full path of a configuration variable. Lines starting with a '#' are comments. In general, bhyve starts by parsing command line options in sequence and applying those settings to configuration values. Once this is complete, bhyve then begins initializing its state based on the configuration values. This means that subsequent configuration options or files may override or supplement previously given settings. A special 'config.dump' configuration value can be set to true to help debug configuration issues. When this value is set, bhyve will print out the configuration variables as a flat list of 'key=value' lines. Most command line argments map to a single configuration variable, e.g. '-w' sets the 'x86.strictmsr' value to false. A few command line arguments have less obvious effects: - Multiple '-p' options append their values (as a comma-seperated list) to "vcpu.N.cpuset" values (where N is a decimal vcpu number). - For '-s' options, a pci.<bus>.<slot>.<function> node is created. The first argument to '-s' (the device type) is used as the value of a "device" variable. Additional comma-separated arguments are then parsed into 'key=value' pairs and used to set additional variables under the device node. A PCI device emulation driver can provide its own hook to override the parsing of the additonal '-s' arguments after the device type. After the configuration phase as completed, the init_pci hook then walks the "pci.<bus>.<slot>.<func>" nodes. It uses the "device" value to find the device model to use. The device model's init routine is passed a reference to its nvlist node in the configuration tree which it can query for specific variables. The result is that a lot of the string parsing is removed from the device models and centralized. In addition, adding a new variable just requires teaching the model to look for the new variable. - For '-l' options, a similar model is used where the string is parsed into values that are later read during initialization. One key note here is that the serial ports use the commonly used lowercase names from existing documentation and examples (e.g. "lpc.com1") instead of the uppercase names previously used internally in bhyve. Reviewed by: grehan MFC after: 3 months Differential Revision: https://reviews.freebsd.org/D26035
2019-06-26 13:30:41 -07:00
if (get_config_bool("acpi_tables")) {
error = acpi_build(ctx, guest_ncpus);
assert(error == 0);
}
if (lpc_bootrom())
fwctl_init();
/*
* Change the proc title to include the VM name.
*/
setproctitle("%s", vmname);
#ifndef WITHOUT_CAPSICUM
caph_cache_catpages();
if (caph_limit_stdout() == -1 || caph_limit_stderr() == -1)
errx(EX_OSERR, "Unable to apply rights for sandbox");
if (caph_enter() == -1)
errx(EX_OSERR, "cap_enter() failed");
#endif
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
if (restore_file != NULL)
destroy_restore_state(&rstate);
/* initialize mutex/cond variables */
init_snapshot();
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
/*
* checkpointing thread for communication with bhyvectl
*/
if (init_checkpoint_thread(ctx) < 0)
printf("Failed to start checkpoint thread!\r\n");
if (restore_file != NULL)
vm_restore_time(ctx);
#endif
/*
* Add CPU 0
*/
fbsdrun_addcpu(ctx, BSP, BSP, rip);
Initial support for bhyve save and restore. Save and restore (also known as suspend and resume) permits a snapshot to be taken of a guest's state that can later be resumed. In the current implementation, bhyve(8) creates a UNIX domain socket that is used by bhyvectl(8) to send a request to save a snapshot (and optionally exit after the snapshot has been taken). A snapshot currently consists of two files: the first holds a copy of guest RAM, and the second file holds other guest state such as vCPU register values and device model state. To resume a guest, bhyve(8) must be started with a matching pair of command line arguments to instantiate the same set of device models as well as a pointer to the saved snapshot. While the current implementation is useful for several uses cases, it has a few limitations. The file format for saving the guest state is tied to the ABI of internal bhyve structures and is not self-describing (in that it does not communicate the set of device models present in the system). In addition, the state saved for some device models closely matches the internal data structures which might prove a challenge for compatibility of snapshot files across a range of bhyve versions. The file format also does not currently support versioning of individual chunks of state. As a result, the current file format is not a fixed binary format and future revisions to save and restore will break binary compatiblity of snapshot files. The goal is to move to a more flexible format that adds versioning, etc. and at that point to commit to providing a reasonable level of compatibility. As a result, the current implementation is not enabled by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option for userland builds, and the kernel option BHYVE_SHAPSHOT. Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz Relnotes: yes Sponsored by: University Politehnica of Bucharest Sponsored by: Matthew Grooms (student scholarships) Sponsored by: iXsystems Differential Revision: https://reviews.freebsd.org/D19495
2020-05-05 00:02:04 +00:00
#ifdef BHYVE_SNAPSHOT
/*
* If we restore a VM, start all vCPUs now (including APs), otherwise,
* let the guest OS to spin them up later via vmexits.
*/
if (restore_file != NULL) {
for (vcpu = 0; vcpu < guest_ncpus; vcpu++) {
if (vcpu == BSP)
continue;
fprintf(stdout, "spinning up vcpu no %d...\r\n", vcpu);
spinup_vcpu(ctx, vcpu);
}
}
#endif
/*
* Head off to the main event dispatch loop
*/
mevent_dispatch();
exit(4);
}