d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f30ac43257
freebsd-nq/sys/mips/include/cpufunc.h

363 lines
10 KiB
C
Raw Normal View History

FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* $OpenBSD: pio.h,v 1.2 1998/09/15 10:50:12 pefo Exp $ */
o) Fix the intr_* functions to not spam the whole status register, just the IE bit. o) Remove some unused inlines. o) Generate CP0 access functions for 64-bit TLB registers when building for n64. o) Add an inline function version of the COP0_SYNC macro.
2010-04-16 23:46:30 +00:00
/*-
* Copyright (c) 2002-2004 Juli Mallett. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/*
* Copyright (c) 1995-1999 Per Fogelstrom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Per Fogelstrom.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* JNPR: cpufunc.h,v 1.5 2007/08/09 11:23:32 katta
* $FreeBSD$
*/
#ifndef _MACHINE_CPUFUNC_H_
#define _MACHINE_CPUFUNC_H_
#include <sys/types.h>
#include <machine/cpuregs.h>
/*
* These functions are required by user-land atomi ops
*/
static __inline void
mips_barrier(void)
{
Fix COP0 hazards for XLR and XLP The XLR CPUs do not have any software visible hazards for COP0 operations. On XLP the hazard is a ehb, since it is mips64r2.
2011-11-18 09:30:24 +00:00
#if defined(CPU_CNMIPS) || defined(CPU_RMI) || defined(CPU_NLM)
o) Cavium Octeon doesn't need nop barriers. o) Have mips_wblush just do syncw, not sync on Cavium Octeon. o) Add support for reading and writing some Octeon-specific registers. NB: Some of these are not entirely Octeon-specific. Submitted by: Bhanu Prakash
2011-02-06 22:21:18 +00:00
__asm __volatile("" : : : "memory");
#else
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
__asm __volatile (".set noreorder\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
"nop\n\t"
".set reorder\n\t"
: : : "memory");
o) Cavium Octeon doesn't need nop barriers. o) Have mips_wblush just do syncw, not sync on Cavium Octeon. o) Add support for reading and writing some Octeon-specific registers. NB: Some of these are not entirely Octeon-specific. Submitted by: Bhanu Prakash
2011-02-06 22:21:18 +00:00
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
}
o) Fix the intr_* functions to not spam the whole status register, just the IE bit. o) Remove some unused inlines. o) Generate CP0 access functions for 64-bit TLB registers when building for n64. o) Add an inline function version of the COP0_SYNC macro.
2010-04-16 23:46:30 +00:00
static __inline void
mips_cp0_sync(void)
{
__asm __volatile (__XSTRING(COP0_SYNC));
}
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
static __inline void
mips_wbflush(void)
{
o) Cavium Octeon doesn't need nop barriers. o) Have mips_wblush just do syncw, not sync on Cavium Octeon. o) Add support for reading and writing some Octeon-specific registers. NB: Some of these are not entirely Octeon-specific. Submitted by: Bhanu Prakash
2011-02-06 22:21:18 +00:00
#if defined(CPU_CNMIPS)
__asm __volatile (".set noreorder\n\t"
"syncw\n\t"
".set reorder\n"
: : : "memory");
#else
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
__asm __volatile ("sync" : : : "memory");
mips_barrier();
o) Cavium Octeon doesn't need nop barriers. o) Have mips_wblush just do syncw, not sync on Cavium Octeon. o) Add support for reading and writing some Octeon-specific registers. NB: Some of these are not entirely Octeon-specific. Submitted by: Bhanu Prakash
2011-02-06 22:21:18 +00:00
#endif
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
}
#ifdef _KERNEL
o) Add MIPS_COP_0_EXC_PC accessors to <machine/cpufunc.h>. o) Make the octeon_wdog driver work on multi-CPU systems and to also print more information on NMI that may aid debugging. Simplify and clean up internal API and structure.
2011-01-04 02:33:48 +00:00
/*
* XXX
* It would be nice to add variants that read/write register_t, to avoid some
* ABI checks.
*/
o) Fix the intr_* functions to not spam the whole status register, just the IE bit. o) Remove some unused inlines. o) Generate CP0 access functions for 64-bit TLB registers when building for n64. o) Add an inline function version of the COP0_SYNC macro.
2010-04-16 23:46:30 +00:00
#if defined(__mips_n32) || defined(__mips_n64)
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
#define MIPS_RW64_COP0(n,r) \
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
static __inline uint64_t \
mips_rd_ ## n (void) \
{ \
int v0; \
__asm __volatile ("dmfc0 %[v0], $"__XSTRING(r)";" \
: [v0] "=&r"(v0)); \
mips_barrier(); \
return (v0); \
} \
static __inline void \
mips_wr_ ## n (uint64_t a0) \
{ \
__asm __volatile ("dmtc0 %[a0], $"__XSTRING(r)";" \
__XSTRING(COP0_SYNC)";" \
"nop;" \
"nop;" \
: \
: [a0] "r"(a0)); \
mips_barrier(); \
} struct __hack
o) Cavium Octeon doesn't need nop barriers. o) Have mips_wblush just do syncw, not sync on Cavium Octeon. o) Add support for reading and writing some Octeon-specific registers. NB: Some of these are not entirely Octeon-specific. Submitted by: Bhanu Prakash
2011-02-06 22:21:18 +00:00
#define MIPS_RW64_COP0_SEL(n,r,s) \
static __inline uint64_t \
mips_rd_ ## n(void) \
{ \
int v0; \
__asm __volatile ("dmfc0 %[v0], $"__XSTRING(r)", "__XSTRING(s)";" \
: [v0] "=&r"(v0)); \
mips_barrier(); \
return (v0); \
} \
static __inline void \
mips_wr_ ## n(uint64_t a0) \
{ \
__asm __volatile ("dmtc0 %[a0], $"__XSTRING(r)", "__XSTRING(s)";" \
__XSTRING(COP0_SYNC)";" \
: \
: [a0] "r"(a0)); \
mips_barrier(); \
} struct __hack
o) Fix the intr_* functions to not spam the whole status register, just the IE bit. o) Remove some unused inlines. o) Generate CP0 access functions for 64-bit TLB registers when building for n64. o) Add an inline function version of the COP0_SYNC macro.
2010-04-16 23:46:30 +00:00
#if defined(__mips_n64)
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
MIPS_RW64_COP0(excpc, MIPS_COP_0_EXC_PC);
MIPS_RW64_COP0(entryhi, MIPS_COP_0_TLB_HI);
MIPS_RW64_COP0(pagemask, MIPS_COP_0_TLB_PG_MASK);
o) Cavium Octeon doesn't need nop barriers. o) Have mips_wblush just do syncw, not sync on Cavium Octeon. o) Add support for reading and writing some Octeon-specific registers. NB: Some of these are not entirely Octeon-specific. Submitted by: Bhanu Prakash
2011-02-06 22:21:18 +00:00
#ifdef CPU_CNMIPS
MIPS_RW64_COP0_SEL(cvmcount, MIPS_COP_0_COUNT, 6);
MIPS_RW64_COP0_SEL(cvmctl, MIPS_COP_0_COUNT, 7);
MIPS_RW64_COP0_SEL(cvmmemctl, MIPS_COP_0_COMPARE, 7);
MIPS_RW64_COP0_SEL(icache_err, MIPS_COP_0_CACHE_ERR, 0);
MIPS_RW64_COP0_SEL(dcache_err, MIPS_COP_0_CACHE_ERR, 1);
#endif
o) Fix the intr_* functions to not spam the whole status register, just the IE bit. o) Remove some unused inlines. o) Generate CP0 access functions for 64-bit TLB registers when building for n64. o) Add an inline function version of the COP0_SYNC macro.
2010-04-16 23:46:30 +00:00
#endif
Support for 64 bit PTEs on n32 and n64 compilation. In n32 and n64, add support for physical address above 4GB by having 64 bit page table entries and physical addresses. Major changes are: - param.h: update PTE sizes, masks and shift values to support 64 bit PTEs. - param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as ptoa), and reformat. - param.h: remove casting to unsigned long in trunc_page and round_page since this will be used on physical addresses. - _types.h: have 64 bit __vm_paddr_t for n32. - pte.h: update TLB LO0/1 access macros to support 64 bit PTE - pte.h: assembly macros for PTE operations. - proc.h: md_upte is now 64 bit for n32 and n64. - exception.S and swtch.S: use the new PTE macros for PTE operations. - cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64. - xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are supported now. Reviewed by: jmallett (earlier version)
2011-01-13 15:17:29 +00:00
#if defined(__mips_n64) || defined(__mips_n32) /* PHYSADDR_64_BIT */
MIPS_RW64_COP0(entrylo0, MIPS_COP_0_TLB_LO0);
MIPS_RW64_COP0(entrylo1, MIPS_COP_0_TLB_LO1);
#endif
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
MIPS_RW64_COP0(xcontext, MIPS_COP_0_TLB_XCONTEXT);
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
#undef MIPS_RW64_COP0
o) Cavium Octeon doesn't need nop barriers. o) Have mips_wblush just do syncw, not sync on Cavium Octeon. o) Add support for reading and writing some Octeon-specific registers. NB: Some of these are not entirely Octeon-specific. Submitted by: Bhanu Prakash
2011-02-06 22:21:18 +00:00
#undef MIPS_RW64_COP0_SEL
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#endif
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
#define MIPS_RW32_COP0(n,r) \
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
static __inline uint32_t \
mips_rd_ ## n (void) \
{ \
int v0; \
__asm __volatile ("mfc0 %[v0], $"__XSTRING(r)";" \
: [v0] "=&r"(v0)); \
mips_barrier(); \
return (v0); \
} \
static __inline void \
mips_wr_ ## n (uint32_t a0) \
{ \
__asm __volatile ("mtc0 %[a0], $"__XSTRING(r)";" \
__XSTRING(COP0_SYNC)";" \
"nop;" \
"nop;" \
: \
: [a0] "r"(a0)); \
mips_barrier(); \
} struct __hack
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
#define MIPS_RW32_COP0_SEL(n,r,s) \
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
static __inline uint32_t \
o) Fix XKPHYS physical address extraction. Also define cache coherency attributes for XKPHYS. o) Make coprocessor 0 accessor function macros for register+selector registers take the full name so that e.g. (as done in this commit), prid selector 1 can be written through mips_wr_ebase() rather than mips_wr_prid1(). o) Allow for sign extension of 32-bit segment addresses. o) Remove an unused MIPS-I register number.
2010-04-19 06:01:58 +00:00
mips_rd_ ## n(void) \
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
{ \
int v0; \
__asm __volatile ("mfc0 %[v0], $"__XSTRING(r)", "__XSTRING(s)";" \
: [v0] "=&r"(v0)); \
mips_barrier(); \
return (v0); \
} \
static __inline void \
o) Fix XKPHYS physical address extraction. Also define cache coherency attributes for XKPHYS. o) Make coprocessor 0 accessor function macros for register+selector registers take the full name so that e.g. (as done in this commit), prid selector 1 can be written through mips_wr_ebase() rather than mips_wr_prid1(). o) Allow for sign extension of 32-bit segment addresses. o) Remove an unused MIPS-I register number.
2010-04-19 06:01:58 +00:00
mips_wr_ ## n(uint32_t a0) \
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
{ \
__asm __volatile ("mtc0 %[a0], $"__XSTRING(r)", "__XSTRING(s)";" \
__XSTRING(COP0_SYNC)";" \
"nop;" \
"nop;" \
: \
: [a0] "r"(a0)); \
mips_barrier(); \
} struct __hack
Update the port of FreeBSD to Cavium Octeon to use the Cavium Simple Executive library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
2010-07-20 19:25:11 +00:00
#ifdef CPU_CNMIPS
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
static __inline void mips_sync_icache (void)
{
Merge from projects/mips to head by hand: r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype. r200343 | imp | 2009-12-09 18:44:11 -0700 (Wed, 09 Dec 2009) | 4 lines Get the sense of this right. We use uintpr_t for bus_addr_t when we're building everything except octeon && 32-bit. As note before, we need a clearner way, but at least now the hack is right. r199760 | imp | 2009-11-24 10:15:22 -0700 (Tue, 24 Nov 2009) | 2 lines Add in Cavium's CID. Report what the unknown CID is. r199754 | imp | 2009-11-24 09:32:31 -0700 (Tue, 24 Nov 2009) | 6 lines Include opt_cputype.h for all .c and .S files referencing TARGET_OCTEON. Spell ld script name right. r199599 | imp | 2009-11-20 09:32:26 -0700 (Fri, 20 Nov 2009) | 2 lines Another kludge for 64-bit bus_addr_t with 32-bit pointers... r199496 | gonzo | 2009-11-18 15:52:05 -0700 (Wed, 18 Nov 2009) | 5 lines - Add cpu_init_interrupts function that is supposed to prepeare stuff required for spinning out interrupts later - Add API for managing intrcnt/intrnames arrays - Some minor style(9) fixes r198958 | rrs | 2009-11-05 11:15:47 -0700 (Thu, 05 Nov 2009) | 2 lines For XLR adds extern for its bus space routines r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-) r198666 | imp | 2009-10-29 18:37:50 -0600 (Thu, 29 Oct 2009) | 2 lines Add some newer MIPS CO cores. r198665 | imp | 2009-10-29 18:37:04 -0600 (Thu, 29 Oct 2009) | 4 lines db_expr_t is really closer to a register_t. Submitted by: bde@ r198531 | gonzo | 2009-10-27 18:01:20 -0600 (Tue, 27 Oct 2009) | 3 lines - Remove bunch of declared but not defined cach-related variables - Add mips_picache_linesize and mips_pdcache_linesize variables r198354 | neel | 2009-10-21 20:51:31 -0600 (Wed, 21 Oct 2009) | 9 lines Get rid of the hardcoded constants to define cacheable memory: SDRAM_ADDR_START, SDRAM_ADDR_END and SDRAM_MEM_SIZE Instead we now keep a copy of the memory regions enumerated by platform-specific code and use that to determine whether an address is cacheable or not. r198310 | gonzo | 2009-10-20 17:13:08 -0600 (Tue, 20 Oct 2009) | 5 lines - Commit missing part of "bt" fix: store PC register in pcb_context struct in cpu_switch and use it in stack_trace function later. pcb_regs contains state of the process stored by exception handler and therefor is not valid for sleeping processes. r198207 | imp | 2009-10-18 08:57:04 -0600 (Sun, 18 Oct 2009) | 2 lines Undo spamage of last MFC. r198206 | imp | 2009-10-18 08:56:33 -0600 (Sun, 18 Oct 2009) | 3 lines _ALIGN has to return u_long, since pointers don't fit into u_int in 64-bit mips. r198182 | gonzo | 2009-10-16 18:22:07 -0600 (Fri, 16 Oct 2009) | 11 lines - Use PC/RA/SP values as arguments for stacktrace_subr instead of trapframe. Context info could be obtained from other sources (see below) no only from td_pcb field - Do not show a0..a3 values unless they're obtained from the stack. These are only confirmed values. - Fix bt command in DDB. Previous implementation used thread's trapframe structure as a source info for trace unwinding, but this structure is filled only when exception occurs. Valid register values for sleeping processes are in pcb_context array. For curthread use pc/sp/ra for current frame r198181 | gonzo | 2009-10-16 16:52:18 -0600 (Fri, 16 Oct 2009) | 2 lines - Get rid of label_t. It came from NetBSD and was used only in one place r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling. r198066 | gonzo | 2009-10-13 19:43:53 -0600 (Tue, 13 Oct 2009) | 5 lines - Move stack tracing function to db_trace.c - Axe unused extern MipsXXX declarations - Move all declarations for functions in exceptions.S/swtch.S from trap.c to respective headers r197685 | gonzo | 2009-10-01 14:05:36 -0600 (Thu, 01 Oct 2009) | 2 lines - Sync caches properly when dealing with sf_buf r196215 | imp | 2009-08-14 10:15:18 -0600 (Fri, 14 Aug 2009) | 6 lines (u_int) is the wrong type here. Use unsigned long instead, even though that's only less wrong... r196199 | imp | 2009-08-13 13:47:13 -0600 (Thu, 13 Aug 2009) | 7 lines Use unsigned long instead of unsigned for the integer casts here. The former works for both ILP32 and LP64 programming models, while the latter fails LP64. r196089 | gonzo | 2009-08-09 19:49:59 -0600 (Sun, 09 Aug 2009) | 4 lines - Make i/d cache size field 32-bit to prevent overflow Submited by: Neelkanth Natu r195582 | imp | 2009-07-10 13:07:07 -0600 (Fri, 10 Jul 2009) | 2 lines fix prototype for MipsEmulateBranch. r195581 | imp | 2009-07-10 13:06:43 -0600 (Fri, 10 Jul 2009) | 2 lines Better definitions for a few types for n32/n64. r195580 | imp | 2009-07-10 13:06:15 -0600 (Fri, 10 Jul 2009) | 5 lines Fixed aligned macros... r195478 | gonzo | 2009-07-08 16:28:36 -0600 (Wed, 08 Jul 2009) | 5 lines - Port busdma code from FreeBSD/arm. This is more mature version that takes into account all limitation to DMA memory (boundaries, alignment) and implements bounce pages. - Add BUS_DMASYNC_POSTREAD case to bus_dmamap_sync_buf r195440 | imp | 2009-07-08 00:01:37 -0600 (Wed, 08 Jul 2009) | 2 lines Fix atomic_store_64 prototype for 64-bit systems. r195392 | imp | 2009-07-05 20:27:03 -0600 (Sun, 05 Jul 2009) | 3 lines The MCOUNT macro isn't going to work in 64-bit mode. Add a note to this effect. r195391 | imp | 2009-07-05 20:22:51 -0600 (Sun, 05 Jul 2009) | 3 lines Provide a macro for PTR_ADDU as well. We may need to implement this differently for N32... Use PTR_ADDU in DO_AST macro. r195390 | imp | 2009-07-05 20:22:06 -0600 (Sun, 05 Jul 2009) | 4 lines Change the addu here to daddu. addu paranoina prodded by: jmallet@ r195382 | imp | 2009-07-05 15:16:26 -0600 (Sun, 05 Jul 2009) | 5 lines addu and subu are special. We need to use daddu and dsubu here to get proper behavior. Submitted by: jmallet@ r195370 | imp | 2009-07-05 09:20:16 -0600 (Sun, 05 Jul 2009) | 6 lines The SB1 has cohernet memory, so add it. Also, Maxmem is better as a long. Submitted by: Neelkanth Natu r195369 | imp | 2009-07-05 09:19:28 -0600 (Sun, 05 Jul 2009) | 4 lines The SB1 needs a special value for the cache field of the pte. Submitted by: Neelkanth Natu r195368 | imp | 2009-07-05 09:18:06 -0600 (Sun, 05 Jul 2009) | 2 lines compute the areas to save registers in for 64-bit access correctly. r195367 | imp | 2009-07-05 09:17:11 -0600 (Sun, 05 Jul 2009) | 3 lines First cut at 64-bit types. not 100% sure these are all correct for N32 ABI. r195366 | imp | 2009-07-05 09:16:27 -0600 (Sun, 05 Jul 2009) | 3 lines Trim unreferenced goo. SDRAM likely should be next, but it is still referenced. r195365 | imp | 2009-07-05 09:13:24 -0600 (Sun, 05 Jul 2009) | 9 lines First cut at atomics for 64-bit machines and SMP machines. # Note: Cavium provided a port that has atomics similar to these, but # that does a syncw; sync; atomic; sync; syncw where we just do the classic # mips 'atomic' operation (eg ll; frob; sc). It is unclear to me why # the extra is needed. Since my initial target is one core, I'll defer # investigation until I bring up multiple cores. syncw is an octeon specific # instruction. r195359 | imp | 2009-07-05 02:14:00 -0600 (Sun, 05 Jul 2009) | 4 lines Bring in cdefs.h from NetBSD to define ABI goo. Obtained from: NetBSD r195358 | imp | 2009-07-05 02:13:19 -0600 (Sun, 05 Jul 2009) | 4 lines Pull in machine/cdefs.h for the ABI definitions. Provide a PTR_LA, ala sgi, and use it in preference to a bare 'la' so that it gets translated to a 'dla' for the 64-bit pointer ABIs. r195357 | imp | 2009-07-05 01:01:34 -0600 (Sun, 05 Jul 2009) | 2 lines Use uintptr_t rather than unsigned here for 64-bit correctness. r195356 | imp | 2009-07-05 01:00:51 -0600 (Sun, 05 Jul 2009) | 6 lines Define __ELF_WORD_SIZE appropriately for n64. Note for N32 I believe this is correct. While registers are 64-bit, n32 is a 32-bit ABI and lives in a 32-bit world (with explicit 64-bit registers, however). Change an 8, which was 4 + 4 or sizeof(int) + SZREG to be a simple '4 + SZREG' to reflect the actual offset of the structure in question. r195355 | imp | 2009-07-05 00:56:51 -0600 (Sun, 05 Jul 2009) | 7 lines (1) Use uintptr_t in preference to unsigned. The latter isn't right for 64-bit case, while the former is. (2) include a SB1 specific coherency mapping Submitted by: Neelkanth Nath (2) r195352 | imp | 2009-07-05 00:44:37 -0600 (Sun, 05 Jul 2009) | 3 lines db_expr_t should be a intptr_t, not an int. These expressions can be addresses or numbers, and that's a intptr_t if I ever saw one. r195351 | imp | 2009-07-05 00:43:01 -0600 (Sun, 05 Jul 2009) | 4 lines Define COP0_SYNC for SB1 CPU. Submitted by: Neelkanth Natu r195350 | imp | 2009-07-05 00:39:37 -0600 (Sun, 05 Jul 2009) | 7 lines Switch to ABI agnostic ta0-ta3. Provide defs for this in the right places. Provide n32/n64 register name defintions. This should have no effect for the O32 builds that everybody else uses, but should help make N64 builds possible (lots of other changes are needed for that). Obtained from: NetBSD (for the regdef.h changes) r195128 | gonzo | 2009-06-27 17:27:41 -0600 (Sat, 27 Jun 2009) | 4 lines - Add support for handling TLS area address in kernel space. From the userland point of view get/set operations are performed using sysarch(2) call. r195076 | gonzo | 2009-06-26 13:54:06 -0600 (Fri, 26 Jun 2009) | 2 lines - Add guards to ensure that these files are included only once r194469 | gonzo | 2009-06-18 22:43:49 -0600 (Thu, 18 Jun 2009) | 16 lines - Mark temp variable as "earlyclobber" in assembler inline in atomic_fetchadd_32. Without it gcc would use it as input register for v and sometimes generate following code for function call like atomic_fetchadd_32(&(fp)->f_count, -1): 801238b4: 2402ffff li v0,-1 801238b8: c2230018 ll v1,24(s1) 801238bc: 00431021 addu v0,v0,v1 801238c0: e2220018 sc v0,24(s1) 801238c4: 1040fffc beqz v0,801238b8 <dupfdopen+0x2e8> 801238c8: 00000000 nop Which is definitly wrong because if sc fails v0 is set to 0 and previous value of -1 is overriden hence whole operation turns to bogus r194164 | imp | 2009-06-14 00:14:25 -0600 (Sun, 14 Jun 2009) | 3 lines bye bye. This is no longer referenced, but much code from it will resurface for a bus-space implementation. r194160 | imp | 2009-06-14 00:10:36 -0600 (Sun, 14 Jun 2009) | 3 lines Cavium-specific goo is no longer necessary here. Of course, I now have to write a bus space for cavium, but that shouldn't be too hard. r194157 | imp | 2009-06-14 00:01:46 -0600 (Sun, 14 Jun 2009) | 2 lines Move this to a more approrpiate plae. r194156 | imp | 2009-06-13 23:29:13 -0600 (Sat, 13 Jun 2009) | 2 lines Bring this in from the cavium port. r193487 | gonzo | 2009-06-05 02:37:11 -0600 (Fri, 05 Jun 2009) | 2 lines - Use restoreintr instead of enableint while accessing pcpu in DO_AST r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it. r192817 | gonzo | 2009-05-26 10:35:05 -0600 (Tue, 26 May 2009) | 2 lines - Add type cast for atomic_cmpset_acq_ptr arguments r192792 | gonzo | 2009-05-26 00:01:17 -0600 (Tue, 26 May 2009) | 2 lines - Remove now unused NetBSDism intr.h r192177 | gonzo | 2009-05-15 20:39:13 -0600 (Fri, 15 May 2009) | 4 lines - Add MIPS_IS_KSEG0_ADDR, MIPS_IS_KSEG1_ADDR and MIPS_IS_VALID_PTR macroses thet check if address belongs to KSEG0, KSEG1 or both of them respectively. r191589 | gonzo | 2009-04-27 13:18:55 -0600 (Mon, 27 Apr 2009) | 3 lines - Cast argument to proper type in order to avoid warnings like "shift value is too large for given type" r191577 | gonzo | 2009-04-27 12:29:59 -0600 (Mon, 27 Apr 2009) | 4 lines - Use naming convention the same as MIPS spec does: eliminate _sel1 sufix and just use selector number. e.g. mips_rd_config_sel1 -> mips_rd_config1 - Add WatchHi/WatchLo accessors for selctors 1..3 (for debug purposes) r191451 | gonzo | 2009-04-23 22:17:21 -0600 (Thu, 23 Apr 2009) | 4 lines - Define accessor functions for CP0 Config(16) register selects 1, 2, 3. Content of these registers is defined in MIPS spec and can be used for obtaining info about CPU capabilities. r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places. r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
2010-01-10 19:50:24 +00:00
__asm __volatile (
".set push\n"
".set mips64\n"
".word 0x041f0000\n" /* xxx ICACHE */
"nop\n"
".set pop\n"
: : );
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
}
#endif
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
MIPS_RW32_COP0(compare, MIPS_COP_0_COMPARE);
MIPS_RW32_COP0(config, MIPS_COP_0_CONFIG);
MIPS_RW32_COP0_SEL(config1, MIPS_COP_0_CONFIG, 1);
MIPS_RW32_COP0_SEL(config2, MIPS_COP_0_CONFIG, 2);
MIPS_RW32_COP0_SEL(config3, MIPS_COP_0_CONFIG, 3);
o) Cavium Octeon doesn't need nop barriers. o) Have mips_wblush just do syncw, not sync on Cavium Octeon. o) Add support for reading and writing some Octeon-specific registers. NB: Some of these are not entirely Octeon-specific. Submitted by: Bhanu Prakash
2011-02-06 22:21:18 +00:00
#ifdef CPU_CNMIPS
MIPS_RW32_COP0_SEL(config4, MIPS_COP_0_CONFIG, 4);
#endif
MIPS changes for Netlogic XLP support. This patch adds support for the Netlogic XLP mips64 processors in the common MIPS code. The changes are : - Add CPU_NLM processor type - Add cases for CPU_NLM, mostly were CPU_RMI is used. - Update cache flush changes for CPU_NLM - Add kernel build configuration files for xLP. In collaboration with: Prabhath Raman <prabhathpr at netlogicmicro com> Approved by: bz(re), jmallett, imp(mips)
2011-07-16 20:31:29 +00:00
#ifdef CPU_NLM
MIPS_RW32_COP0_SEL(config6, MIPS_COP_0_CONFIG, 6);
MIPS_RW32_COP0_SEL(config7, MIPS_COP_0_CONFIG, 7);
#endif
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
MIPS_RW32_COP0(count, MIPS_COP_0_COUNT);
MIPS_RW32_COP0(index, MIPS_COP_0_TLB_INDEX);
MIPS_RW32_COP0(wired, MIPS_COP_0_TLB_WIRED);
MIPS_RW32_COP0(cause, MIPS_COP_0_CAUSE);
o) Add MIPS_COP_0_EXC_PC accessors to <machine/cpufunc.h>. o) Make the octeon_wdog driver work on multi-CPU systems and to also print more information on NMI that may aid debugging. Simplify and clean up internal API and structure.
2011-01-04 02:33:48 +00:00
#if !defined(__mips_n64)
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
MIPS_RW32_COP0(excpc, MIPS_COP_0_EXC_PC);
o) Add MIPS_COP_0_EXC_PC accessors to <machine/cpufunc.h>. o) Make the octeon_wdog driver work on multi-CPU systems and to also print more information on NMI that may aid debugging. Simplify and clean up internal API and structure.
2011-01-04 02:33:48 +00:00
#endif
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
MIPS_RW32_COP0(status, MIPS_COP_0_STATUS);
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
/* XXX: Some of these registers are specific to MIPS32. */
o) Fix the intr_* functions to not spam the whole status register, just the IE bit. o) Remove some unused inlines. o) Generate CP0 access functions for 64-bit TLB registers when building for n64. o) Add an inline function version of the COP0_SYNC macro.
2010-04-16 23:46:30 +00:00
#if !defined(__mips_n64)
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
MIPS_RW32_COP0(entryhi, MIPS_COP_0_TLB_HI);
MIPS_RW32_COP0(pagemask, MIPS_COP_0_TLB_PG_MASK);
o) Fix the intr_* functions to not spam the whole status register, just the IE bit. o) Remove some unused inlines. o) Generate CP0 access functions for 64-bit TLB registers when building for n64. o) Add an inline function version of the COP0_SYNC macro.
2010-04-16 23:46:30 +00:00
#endif
XLP processors have the release 2 pagegrain register Add accessors to cpufunc.h Obtained from: prabhath at netlogicmicro com
2011-11-21 07:55:37 +00:00
#ifdef CPU_NLM
MIPS_RW32_COP0_SEL(pagegrain, MIPS_COP_0_TLB_PG_MASK, 1);
#endif
Support for 64 bit PTEs on n32 and n64 compilation. In n32 and n64, add support for physical address above 4GB by having 64 bit page table entries and physical addresses. Major changes are: - param.h: update PTE sizes, masks and shift values to support 64 bit PTEs. - param.h: remove DELAY(), mips_btop(same as atop), mips_ptob (same as ptoa), and reformat. - param.h: remove casting to unsigned long in trunc_page and round_page since this will be used on physical addresses. - _types.h: have 64 bit __vm_paddr_t for n32. - pte.h: update TLB LO0/1 access macros to support 64 bit PTE - pte.h: assembly macros for PTE operations. - proc.h: md_upte is now 64 bit for n32 and n64. - exception.S and swtch.S: use the new PTE macros for PTE operations. - cpufunc.h: TLB_LO0/1 registers are 64bit for n32 and n64. - xlr_machdep.c: Add memory segments above 4GB to phys_avail[] as they are supported now. Reviewed by: jmallett (earlier version)
2011-01-13 15:17:29 +00:00
#if !defined(__mips_n64) && !defined(__mips_n32) /* !PHYSADDR_64_BIT */
MIPS_RW32_COP0(entrylo0, MIPS_COP_0_TLB_LO0);
MIPS_RW32_COP0(entrylo1, MIPS_COP_0_TLB_LO1);
#endif
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
MIPS_RW32_COP0(prid, MIPS_COP_0_PRID);
o) Fix the intr_* functions to not spam the whole status register, just the IE bit. o) Remove some unused inlines. o) Generate CP0 access functions for 64-bit TLB registers when building for n64. o) Add an inline function version of the COP0_SYNC macro.
2010-04-16 23:46:30 +00:00
/* XXX 64-bit? */
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
MIPS_RW32_COP0_SEL(ebase, MIPS_COP_0_PRID, 1);
MIPS_RW32_COP0(watchlo, MIPS_COP_0_WATCH_LO);
MIPS_RW32_COP0_SEL(watchlo1, MIPS_COP_0_WATCH_LO, 1);
MIPS_RW32_COP0_SEL(watchlo2, MIPS_COP_0_WATCH_LO, 2);
MIPS_RW32_COP0_SEL(watchlo3, MIPS_COP_0_WATCH_LO, 3);
MIPS_RW32_COP0(watchhi, MIPS_COP_0_WATCH_HI);
MIPS_RW32_COP0_SEL(watchhi1, MIPS_COP_0_WATCH_HI, 1);
MIPS_RW32_COP0_SEL(watchhi2, MIPS_COP_0_WATCH_HI, 2);
MIPS_RW32_COP0_SEL(watchhi3, MIPS_COP_0_WATCH_HI, 3);
Add support for hwpmc(4) on the MIPS 24K, 32 bit, embedded processor. Add macros for properly accessing coprocessor 0 registers that support performance counters. Reviewed by: jkoshy rpaulo fabien imp MFC after: 1 month
2010-03-03 15:05:58 +00:00
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
MIPS_RW32_COP0_SEL(perfcnt0, MIPS_COP_0_PERFCNT, 0);
MIPS_RW32_COP0_SEL(perfcnt1, MIPS_COP_0_PERFCNT, 1);
MIPS_RW32_COP0_SEL(perfcnt2, MIPS_COP_0_PERFCNT, 2);
MIPS_RW32_COP0_SEL(perfcnt3, MIPS_COP_0_PERFCNT, 3);
Add support for hwpmc(4) on the MIPS 24K, 32 bit, embedded processor. Add macros for properly accessing coprocessor 0 registers that support performance counters. Reviewed by: jkoshy rpaulo fabien imp MFC after: 1 month
2010-03-03 15:05:58 +00:00
Correct an 8-year-old typo which reliably leads to typo after typo today: The macros here for generating coprocessor 0 accessors are named like: MIPS_RDRW32_COP0 That macro would produce mips_rd_<register>() and mips_wr_<register>() inlines to access the specified register by name from C. The problem is that the R and the W were swapped in the macros originally; it was meant to be named RDWR because it generated mips_rd_* and mips_wr_* functions, but was instead spelled RDRW, which nobody should be expected to get right by anything other than copy and paste. It's too many consonants in a row to keep straight anyway, so just prefer e.g.: MIPS_RW32_COP0 While here, add a missing #undef.
2011-01-04 19:32:03 +00:00
#undef MIPS_RW32_COP0
#undef MIPS_RW32_COP0_SEL
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
static __inline register_t
intr_disable(void)
{
register_t s;
s = mips_rd_status();
mips_wr_status(s & ~MIPS_SR_INT_IE);
o) Fix the intr_* functions to not spam the whole status register, just the IE bit. o) Remove some unused inlines. o) Generate CP0 access functions for 64-bit TLB registers when building for n64. o) Add an inline function version of the COP0_SYNC macro.
2010-04-16 23:46:30 +00:00
return (s & MIPS_SR_INT_IE);
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
}
static __inline register_t
intr_enable(void)
{
register_t s;
s = mips_rd_status();
mips_wr_status(s | MIPS_SR_INT_IE);
return (s);
}
o) Fix the intr_* functions to not spam the whole status register, just the IE bit. o) Remove some unused inlines. o) Generate CP0 access functions for 64-bit TLB registers when building for n64. o) Add an inline function version of the COP0_SYNC macro.
2010-04-16 23:46:30 +00:00
static __inline void
intr_restore(register_t ie)
{
if (ie == MIPS_SR_INT_IE) {
intr_enable();
}
}
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
The functions in sys/mips/mips/psraccess.S can be implemented with mips_rd_status/mips_wr_status. Implement them in mips/include/cpufunc.h, and remove psraccess.S. Reviewed by: neel, imp
2010-09-13 05:03:37 +00:00
static __inline uint32_t
set_intr_mask(uint32_t mask)
{
uint32_t ostatus;
ostatus = mips_rd_status();
Make the meaning of the 'mask' argument to 'set_intr_mask(mask)' consistent with the meaning of IM bits in the status register. Reviewed by: jmallett, jchandra
2010-09-15 05:10:50 +00:00
mask = (ostatus & ~MIPS_SR_INT_MASK) | (mask & MIPS_SR_INT_MASK);
The functions in sys/mips/mips/psraccess.S can be implemented with mips_rd_status/mips_wr_status. Implement them in mips/include/cpufunc.h, and remove psraccess.S. Reviewed by: neel, imp
2010-09-13 05:03:37 +00:00
mips_wr_status(mask);
return (ostatus);
}
static __inline uint32_t
get_intr_mask(void)
{
return (mips_rd_status() & MIPS_SR_INT_MASK);
}
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
static __inline void
breakpoint(void)
{
__asm __volatile ("break");
}
Replace sb_store64()/sb_load64() with mips3_sd()/mips3_ld() respectively. Obtained from NetBSD. Suggested by: jmallett@
2010-03-26 07:15:27 +00:00
#if defined(__GNUC__) && !defined(__mips_o32)
Remove more unused stuff, primarily a set of (unused, thankfully) PIO functions. Adjust nearby style of one assembly function END().
2012-03-12 18:10:01 +00:00
#define mips3_ld(a) (*(const volatile uint64_t *)(a))
#define mips3_sd(a, v) (*(volatile uint64_t *)(a) = (v))
Replace sb_store64()/sb_load64() with mips3_sd()/mips3_ld() respectively. Obtained from NetBSD. Suggested by: jmallett@
2010-03-26 07:15:27 +00:00
#else
uint64_t mips3_ld(volatile uint64_t *va);
void mips3_sd(volatile uint64_t *, uint64_t);
#endif /* __GNUC__ */
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing. This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming... Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser. In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
2008-04-13 07:27:37 +00:00
#endif /* _KERNEL */
#define readb(va) (*(volatile uint8_t *) (va))
#define readw(va) (*(volatile uint16_t *) (va))
#define readl(va) (*(volatile uint32_t *) (va))
#define writeb(va, d) (*(volatile uint8_t *) (va) = (d))
#define writew(va, d) (*(volatile uint16_t *) (va) = (d))
#define writel(va, d) (*(volatile uint32_t *) (va) = (d))
#endif /* !_MACHINE_CPUFUNC_H_ */
Reference in New Issue Copy Permalink