done in consumers code: using locks properties is much more appropriate.
Fix current code doing these bogus checks.
Note: Really, callout are not usable by all !(LC_SPINLOCK | LC_SLEEPABLE)
primitives like rmlocks doesn't implement the generic lock layer
functions, but they can be equipped for this, so the check is still
valid.
Tested by: matteo, kris (earlier version)
Reviewed by: jhb
This allows to fix a problem with ARM kernel.bin not having the MFS image
embedded: it is objcopied from the kernel.noheader temporary ELF file, which
was not subject to embedding the MFS image previously.
Reviewed by: imp
Approved by: cognet (mentor)
De-hardcode usage of ARM_TP_ADDRESS and RAS local storage, and move this
special purpose page to a more convenient place i.e. after the vectors high
page, more towards the end of address space. Previous location (0xe000_0000)
caused grief if KVA was to go beyond the default limit.
Note that ARM world rebuilding is required after this change since the
location of ARM_TP_ADDRESS is shared between kernel and userland.
Submitted by: Grzegorz Bernacki (gjb AT semihalf dot com)
Reviewed by: imp
Approved by: cognet (mentor)
and usr.bin/truss/ioctl.c. This is the correct way to address the problem
that arises when doing an incremental build after a header used by kdump
has been removed (cf. i4b disconnect a while ago)
Explained by: ru
MFC after: 2 weeks
Add a MULTIPLE INSTANCES section which provides an example of
setting up natd in multi-instance mode (based on the notes.natd
file from phk@).
Submitted by: "Andrey V. Elsukov" <bu7cher@yandex.ru>
Reviewed by: ru
the semantics of pthread_mutex_islocked_np() to return true if and only if
the mutex is held by the current thread.
Obviously, change the regression test to match.
MFC after: 2 weeks
- Expose sbrelease_internal(), a variant of sbrelease() with no
expectations about the validity of locks in the socket buffer.
- Use sbrelease_internel() in sorflush(), and as a result avoid intializing
and destroying a socket buffer lock for the temporary stack copy of the
actual buffer, asb.
- Add a comment indicating why we do what we do, and remove an XXX since
things have gotten less ugly in sorflush() lately.
This makes socket close cleaner, and possibly also marginally faster.
MFC after: 3 weeks
locked. This is intended primarily to support the userland equivalent
of the various *_ASSERT_LOCKED() macros we have in the kernel.
MFC after: 2 weeks
referencing the files VM pages are returned from the network stack,
making changes to the file safe.
This flag does not guarantee that the data has been transmitted to the
other end.
- Rename rt2560_read_eeprom to rt2560_read_config, we already have
rt2560_eeprom_read
- If hardware gives us wrong encryption done index, shout out loudly and
terminate the processing loop
- Process encryption done if RX done bit is set in interrupt status register
(according to Ralink Linux driver)
- Turn VALID/BUSY bits in TX descriptor only after TX descriptor is fully setup
- Fix BBP read: RT2560_BBPCSR can't be written until its RT2560_BBP_BUSY bit is
off (according to Ralink Linux driver)
- Skip invalid (0 of 0xffff) BBP register/value entries stored in EEPROM
- Fix channel TX power location in EEPROM, if channel TX power is above 31 set
it to 24 (TX power only has 5bits in RF register, "24" is according to Ralink
Linux driver)
- Configure BBP according to the BBP register/value stored in EEPROM, restore
BBP17 (RX sensitivity tuning) to default value after this.
- Set TX/RX antenna after BBP is initialized; these two operation will try to
set BBP registers
- Reconfigure ACK TX time registers according to 802.11g standard (TX @36Mb,
other side's ACK should be sent @24Mb).
- 2560 parts have two TX ring: one for management/control packets, one for data
packets. Add private OACTIVE flag for each of them. Turn on IFF_DRV_OACTIVE
if one of private OACTIVE is on; turn off IFF_DRV_OACTIVE iff all of them are
off.
- Rework watchdog to mimic old if_watchdog action. Process TX done/encryption
done in watchdog function (according to Ralink Linux driver)
Obtained from: DragonFly
Approved by: sam (mentor)
Tested by: sam
Related to PR: kern/117655
# Forcing long slot time setting is not included in this commit, comment and
# related code is in place, so if problem pops up, quick tests could be done.
were recently), a simple 'make cleandepend; make depend' is sufficient
to keep the tree buildable after a cvs update when doing incremental
builds.
However, kdump and truss use a script which searches for header files
that define ioctls, and generates C code that includes them. This
script will usually not need updating when a header file is removed,
so the normal dependency mechanism will not realize that it needs to
be re-run. One is therefore left with code that references dead files
but will only be removed by a full 'make clean', which defeats the
purpose of incremental builds.
To work around this, modify the cleandepend target in bsd.dep.mk to
also remove any files listed in a new variable named CLEANDEPFILES,
and modify kdump's and truss's Makefiles accordingly.
MFC after: 2 weeks
