When truss is detaching from very active process it is possible to
hang on waitpid(2) in restore_proc() forever, because
ptrace(PT_SYSCALL) must be called before detaching, to allow the
debugging process to continue execution. Also when truss called with
'-c' argument, it does not print anything after detach, because it
immediately exits from restore_proc().
To fix these two problems make detaching deferred, but then it is
impossible to detach from a process which does not do any system call.
To fix this issue use sigaction(2) instead of signal(3) to disable
SA_RESTART flag for waitpid(2) that makes it non-restartable. Remove
global variable child_pid, because now detaching is handled in context
where child's pid is known.
Reported by: mjg
Tested by: mjg, swills
Approved by: kib (mentor)
MFC after: 2 weeks
ioctlname() to return a pointer to the name rather than print it. This did
not show up in testing because truss had its own prototype for ioctlname(),
so it would build fine and run fine as long as the program being traced did
not issue an ioctl.
Teach mkioctls to generate different versions of ioctlname() based on its
first command-line argument.
Pointed out by: Garrett Cooper <yanegomi@gmail.com>
This matches the constants from <signal.h> with 'SIG' removed, which POSIX
requires kill and trap to accept and 'kill -l' to write.
'kill -l', 'trap', 'trap -l' output is now upper case.
In Turkish locales, signal names with an upper case 'I' are now accepted,
while signal names with a lower case 'i' are no longer accepted, and the
output of 'killall -l' now contains proper capital 'I' without dot instead
of a dotted capital 'I'.
with the -o option. Setting the flag for stderr (the default) could
cause the traced process to redirect stderr to a random file.
PR: bin/152151
Submitted by: ashish
MFC after: 5 days
Using a separate process group here is bad, since (for example) job
control in the TTY layer prevents interaction with the TTY, causing the
child process to hang.
Mentioned on: current@
MFC after: 2 weeks
r195175. Remove all definitions, documentation, and usage.
fifo_misc.c:
Remove all kqueue tests as fifo_io.c performs all those that
would have remained.
Reviewed by: rwatson
MFC after: 3 weeks
X-MFC note: don't change vlan_link_state() function signature
i386-fbsd.c. Add pipe(2) to syscall table to decode it's pointer
argument properly and re-add special handling for pipe(2) return value
to print_syscall_ret().
PR: bin/120870
Approved by: trasz (mentor)
been extensively tested. And the ELF64 stuff likely is not quite
right...
# There's a lot of cut-n-paste code here that could easily be
# refactored, at least for FreeBSD syscalls.
were recently), a simple 'make cleandepend; make depend' is sufficient
to keep the tree buildable after a cvs update when doing incremental
builds.
However, kdump and truss use a script which searches for header files
that define ioctls, and generates C code that includes them. This
script will usually not need updating when a header file is removed,
so the normal dependency mechanism will not realize that it needs to
be re-run. One is therefore left with code that references dead files
but will only be removed by a full 'make clean', which defeats the
purpose of incremental builds.
To work around this, modify the cleandepend target in bsd.dep.mk to
also remove any files listed in a new variable named CLEANDEPFILES,
and modify kdump's and truss's Makefiles accordingly.
MFC after: 2 weeks
containing 64-bit arguments would have explicit padding.
On 64-bit platforms there was no padding, so the dummy
argument was not covering anything. On 32-bit platforms
with weak alignment (i.e. i386) the 64-bit argument did
not need to be aligned, so there too an aditional argument
was introduced. On 32-bit platforms with strong alignment
(i.e. PowerPC) the dummy argument in fact cover the padding.
By elimininating the dummy argument, 64-bit platforms now
have 1 argument less. This also applies to 32-bit platforms
with weak alignment. On PowerPC this doesn't matter, because
the padding is still there. We just don't "name" it.
Deal with those 3 cases.
Approved by: re (kensmith)
- Fix logic handling execve(). We will not be able to
obtain information otherwise.
- truss coredump [1].
- truss does not work against itself [2].
PR: bin/58970 [1], bin/45193 [2]
Submitted by: Howard Su
Approved by: re (kensmith)
rename, __getcwd, shutdown, getrlimit, setrlimit, _umtx_lock, _umtx_unlock,
pathconf, truncate, ftruncate, kill
- Decode more arguments of open, mprot, *stat, and fcntl.
- Convert all constant-macro and bitfield decoding to lookup tables; much
cleaner than previous code.
- Print the timestamp of process exit and signal reception when -d or -D are in
use
- Try six times with 1/2 second delay to debug the child
PR: bin/52190 (updated)
Submitted by: Dan Nelson <dnelson@allantgroup.com>
Approved by: alfred
type which is a String type that has no -s limitations applied to it.
Change most Strings in the code to Names and add a few extra syscalls,
namely munmap, read, rename and symlink. This was enough to facilitate
following file descriptor allocations in the code more easily and
getting a hint at what's being read/written from/to files. More
syscalls should really be added.
While here, fix an off-by-one bug in the buffer truncation code and
add a fflush so that truss's output reflects the syscall that the
program is stuck in.
Sponsored by: Sophos/Activestate
MFC after: 2 weeks
also occupies a single slot. There's no need for any special handling
of Quads. While here, remove the silly make_quad() function. We have
the 2 longs on 32-bit machines already lined up in the argument array,
so we can fetch the Quad with a simple cast.
Before:
lseek(1,0x123456789,0xd0d0d0d0d0d0d0d0) = 4886718345 (0x123456789)
After:
lseek(1,0x123456789,SEEK_SET) = 4886718345 (0x123456789)
result buffer, so we need to format it ourselves. The problem is
that the length is stored as the return value from readlink, so we
need to pass the return value from our syscall into print_arg.
Motivated by: truss garbage on my screen from reading /etc/malloc.conf.
Fd_set and Sigaction structures. Use these for printing the arguments
to sigaction(), nanosleep(), select(), poll(), gettimeofday(),
clock_gettime(), recvfrom(), getitimer() and setitimer().
This is based on Dan's patch from the PR but I've hacked it for
style and some other issues. While Dan has checked this patch, any
goofs are probably my fault.
(The PR also contains support for the dual return values of pipe().
These will follow once I've ported that support to platforms other
than i386.)
PR: 52190
Submitted by: Dan Nelson <dnelson@allantgroup.com>
In my last change I made sure that the signal as reported from a truss
exit is the same as if truss wasn't between parent and trussed
program. I was smart enough to not have it coredump on SIGQUIT but it
didn't ocur to me SIGSEGV might cause a coredump, too :-)
So get rid of SIGQUIT extra hack and limit coredumpsize to zero
instead.
Tested: still works, correct signal reported. No more codedumps from
SIGSEGV in the trussed proces. This file compiles cleanly on AMD64
(sledge).
PR:
Submitted by:
Reviewed by:
Approved by:
Obtained from:
MFC after:
is that fseeko() fails in very predictable and frequent ways on ia64.
This is because the offset is actually an address in the process'
address space, which on ia64 can be larger than long (for lseek) or
off_t (for fseeko). The crux is the signedness. The register stack
and memory stack are in region 4 on ia64. This means that the sign bit
is 1. The large positive virtual address is wrongly interpreted as
a negative file offset.
There's no quick fix. Even if you get around the API by using a
SEEK_SET up to LONG_MAX and follow it up with a SEEK_CUR for the
remainder, the kernel simply cannot deal with it. and the second
seek will just fail.
Therefore, this change does not actually fix the root cause. It just
makes sure we're not spitting out all kinds of garbage or that the
get_struct() function in particular does not cause truss(1) to exit.
This, I might add, invariably happened way too soon for truss(1) to
be of any use on ia64...
o Syscall return values do not fit in int on 64-bit architectures.
Change the type of retval in <arch>_syscall_exit() to long and
change the prototype of said function to return a long as well.
o Change the prototype of print_syscall_ret() to take a long for
the return address and change the format string accordingly.
o Replace the code sequence
tmp = malloc(X);
sprintf(tmp, format, ...);
with X by definition too small on 64-bit platforms by
asprintf(&tmp, format, ...);
With these changes the output makes sense again, although it does
mess up the tabulation on ia64. Go widescreen...
Not tested on: alpha, sparc64.
frame, occupying scratch registers r16 and up. We don't have to
save any scratch registers for syscalls, so we have plenty of
room there. Consequently, when we fetch the registers from the
process, we automaticly have all the arguments and don't need
to read them seperately.
prime objectives are:
o Implement a syscall path based on the epc inststruction (see
sys/ia64/ia64/syscall.s).
o Revisit the places were we need to save and restore registers
and define those contexts in terms of the register sets (see
sys/ia64/include/_regset.h).
Secundairy objectives:
o Remove the requirement to use contigmalloc for kernel stacks.
o Better handling of the high FP registers for SMP systems.
o Switch to the new cpu_switch() and cpu_throw() semantics.
o Add a good unwinder to reconstruct contexts for the rare
cases we need to (see sys/contrib/ia64/libuwx)
Many files are affected by this change. Functionally it boils
down to:
o The EPC syscall doesn't preserve registers it does not need
to preserve and places the arguments differently on the stack.
This affects libc and truss.
o The address of the kernel page directory (kptdir) had to
be unstaticized for use by the nested TLB fault handler.
The name has been changed to ia64_kptdir to avoid conflicts.
The renaming affects libkvm.
o The trapframe only contains the special registers and the
scratch registers. For syscalls using the EPC syscall path
no scratch registers are saved. This affects all places where
the trapframe is accessed. Most notably the unaligned access
handler, the signal delivery code and the debugger.
o Context switching only partly saves the special registers
and the preserved registers. This affects cpu_switch() and
triggered the move to the new semantics, which additionally
affects cpu_throw().
o The high FP registers are either in the PCB or on some
CPU. context switching for them is done lazily. This affects
trap().
o The mcontext has room for all registers, but not all of them
have to be defined in all cases. This mostly affects signal
delivery code now. The *context syscalls are as of yet still
unimplemented.
Many details went into the removal of the requirement to use
contigmalloc for kernel stacks. The details are mostly CPU
specific and limited to exception_save() and exception_restore().
The few places where we create, destroy or switch stacks were
mostly simplified by not having to construct physical addresses
and additionally saving the virtual addresses for later use.
Besides more efficient context saving and restoring, which of
course yields a noticable speedup, this also fixes the dreaded
SMP bootup problem as a side-effect. The details of which are
still not fully understood.
This change includes all the necessary backward compatibility
code to have it handle older userland binaries that use the
break instruction for syscalls. Support for break-based syscalls
has been pessimized in favor of a clean implementation. Due to
the overall better performance of the kernel, this will still
be notived as an improvement if it's noticed at all.
Approved by: re@ (jhb)
1) Missing include.
2) Constness.
3) ANSIfication.
4) Avoid some shadowing.
5) Add/clarify some error messages.
6) Some int functions were using return without a value.
7) Mark some parameters as unused.
8) Cast a value we know is non-negative to a size_t before comparing.
depend on namespace pollution in <signal.h>. (truss shouldn't be
using timevals anyway, since it was implemented long after timevals
were obsoleted by timespecs.)
stdout. Unfortunately, DES mfc'ed this change in 1.15.2.1 (this
part probably should not have been) so it is broken there too.
truss is documented to use stderr, and other implementations use stderr.
Submitted by: Arne Dag Fidjestøl <adf@idi.ntnu.no>
breakage with ioctl.c. The .depend file should track dependencies
just fine, and the worst we can have is to miss new ioctls.
But I still think it's a good idea to have -DNOCLEAN build produce
the same ioctl.c as it would without -DNOCLEAN.
Prodded for a long time by: bde
AF_INET6 and AF_UNIX sockaddrs, and will recognize accept(), bind(),
connect(), getpeername() and getsockname() as syscalls taking sockaddr
arguments. Some enterprising soul might want to add (and test) support
for the send() / recv() family of syscalls as well.
MFC after: 1 week