.if in Makefiles. bsd.prog.mk and bsd.lib.mk do not depend on it however.
Allow overriding of the -soname arg when building the lib*crypt.so* libs
since libdescrypt.so and libscrupt.so both need a -soname of libcrypt.so
so that the symlink is obeyed at runtime rather than at compile time.
since 2.1.x make(1) apparently does not have the -m switch to set both
the the bsd.*.mk and sys.mk location, and this breaks 'make world' from a
2.1.x system.
* lots of fixes to error handling-- mostly works now
* improve DMA timing config for Triton chipsets-- PIIX4 and UDMA drive
still untested
* generally improve DMA config in many ways-- mostly cleanup
* clean up boot-time messages
* rewrite PRD generation algorithm
* first wd timeout is now longer, to handle drive spinup
Submitted by: John Hood <cgull@smoke.marlboro.vt.us>
note, using "-Wl,-f" to generate a library objects list doesn't work
anymore since the hack to ld hasn't been incorporated into binutils-2.8.
(and the -f switch is used for something else already)
This is disabled by default, don't panic! :-)
you can get one from.)
(2) Use "reinstall" as DEPENDS_TARGET if target is "reinstall". In
particular, this will make it possible to do a "make reinstall" on
several NFS clients and have them install all dependencies
correctly.
Tested by: davidn
a couple *.mk files to enable -current world building on really old
machines (e.g., 2.1.5).
Reviewed by: too many many people to list here, special thanks to bde
in a few places (in bsd.lib.mk and bsd.prog.mk); this merely fixed part of
the brokenness by not setting it here.
This fixes building of secure telnetd when DESTDIR is defined.
(Otherwise, it will try to link libtelnet from ${DESTDIR}/usr/lib.)
Reviewed by: bde, jkh
patches and files. Note this is just for testing -- I don't
expect "patches.OpenBSD" or "Makefile.alpha" start cropping up on
our ports tree just yet!
Pretty much ignored by: the ports/committers list
(2) Add "SH?=/bin/sh" to the list of command-name macros. Use it.
Checked by: recompiling all packages
Fixed bitrot (__dead went away; EOF is now wrong for the getopt failure
value).
Moved sleep command to the end of the main loop to avoid mismatch between
main loop and the report loop. There is an extra iteration that could be
used to calibrate the loop overhead, but was used to report wrong results.
Fixed usage message.
it also sets RUN_DEPENDS (USE_GMAKE is BUILD_DEPENDS only).
The (immediate) purpose of this is to avoid having to change 70
zillion ports when the version of perl changes. Also, when perl5 is
pulled into -current, this will become a no-op in -current's
bsd.port.mk.
Reviewed by: jfitz
(bsd.dep.mk) and compiling assembly language sources (bsd.lib.mk).
This doesn't change anything for our current source tree, but if you
want to use the -B switch in C*FLAGS to specify the location of
compiler subprograms, now you can do it.
Reviewed by: bde (implicitly)
"do-install" target to the beginning of the "install" meta-target, so
that ports that define their own do-install will also run it without
having to duplicate it themselves.
Tested by: rebuilding all packages
like bsd.lib.mk and bsd.prog.mk. It doesn't add it to CXXINCLUDES, I
don't think anybody has written a kernel module with C++. (Not that I
think DavidG will allow it anyway. :)
Reviewed by: bde
1) fix k1-k4 to match XF3.3
2) fix kb,kD to match keyboard
3) merge xterm-color in: default description must match best current practice
and color card is most common variant for X now. Add xterm-mono entry for
mono cards.
/usr/X11R6 if USE_IMAKE or USE_X11 is set. It is mostly designed
after the XFree86 distribution, but also includes some of our own
goodies (libexec, share/doc, etc/rc.d).
(2) Full support for per-port dependency target. An optional
":<target>" can be added to any of the *_DEPENDS variables. Do
not attempt to print out anything about dependencies if NO_DEPENDS
is set (there was already too much code duplication, and this
extra colon has really pushed it over the limit).
Requested by: jfitz
(3) Make "reinstal" pmake-safe.
Reminded in an e-mail from: jkh
These commands are required for the "Disk-At-Once" write process:
WORMIOCREADSESSIONINFO returns the length of the lead-in and lead-out areas
and WORMIOCWRITESESSION is used to send the table of contents of the disk.
The FAQ and handbook have been repository copied to their own top-level
("doc") directory in the cvs tree which will not be branched so as to
avoid the syncing problems. At some point, the sgml text will require
formatting tools that will be from ports rather than the main source tree.
Requested by: jfieber, jkh
Added MASTER_STIE_LOCAL and updated it's location.
Added -N to diff options to ensure the diff includes new files.
Mentioned that USENET news ports should use ${PREFIX}/news.
Refromatted some of the comments w/in the sample Makefile so they wouldn't
wrap in the latin1 format.
General updating and minor word changes.
- remove all calls to scsi_stop_unit(). Some drives refuse commands when
stopped. This will fix the 'device not configured' message which was
cleared after opening/closing the tray.
- Never set the logical block address in the scsi_cmd struct when writing.
The computation was bogus for block sizes not a multiple of DEV_BSIZE.
(the bug is still there in the READ case)
- reset the block size to the 2048 bytes in finalize_track() track to avoid
an error when mounting a disk after an audio write.
- remove the WORMIOCQUIRKSELECT ioctl. Quirks are now recorded at probe time
(see scsiconf.c)
- change and expand the argument to the WORMIOCPREPTRACK ioctl. It now possible
to select more track options (copy bits, ISRC codes, track type,
track number)
- add an error handler to catch false errors (warnings in fact) and record
the error type.
- add an ioctl call (WORMIOERROR) to get more information on the nature of the
error when a command or a write failed.
- add an ioctl call (WORMIOCFINISHTRACK) to finalize a track without closing
the device (closing the device still finalize the track if the command was
not performed)
Approved by: joerg
Add Motoyuki Konno <motoyuki@st.rim.or.jp> into the
contributors' list for Japanese translation.
Reviewed by: hanai@astec.co.jp
Submitted by: motoyuki@st.rim.or.jp
Murphy's Law: define LPR=true in /etc/make.conf if you don't want
tomorrow find 3 paper copies (ascii, latin1, postscript) of the
handbook in your printer (or someone else printer on the other half of
the world).
While at it, did some tabs <-> spaces conversion to match the JP version
to the EN version so that patch generated by cvs diff handbook/contrib.sgml
can be often reused to update the JP version.
libraries. Remove the now-unneeded CPLUSPLUSLIB hack. I will also
remove the CPLUSPLUSLIB definitions from the Makefiles that use it,
after the dust settles.
Use gcc's LIBRARY_PATH environment variable to handle DESTDIR,
instead of -L flags in LDDESTDIR. LIBRARY_PATH is documented in
the gcc info pages. It is better than using -L flags, because it
modifies the search for start-up files as well as for libraries.
A new variable LDDESTDIRENV is used to contain the normally-empty
LIBRARY_PATH environment setting.
LDDESTDIR is no longer set in <bsd.lib.mk>. It is still honored for
the time being, because a couple of userland Makefiles still (wrongly)
set it. These should be fixed, and LDDESTDIR should vanish.
Removed the commented-out "LDDESTDIR+=-nostdlib", because "gcc -shared"
doesn't link in any standard libraries anyway.
Removed the ".if defined(LDADD)" around the _EXTRADEPEND target for
shared libraries. This target is always necessary now, because
c++rt0.o is linked into every shared library.
Don't merge this into -2.2 without first merging the support for
"gcc -shared".
latin1 looks very ugly on Russian screens/printers and users should
be able to print/view handbook first without inner knowledge of
bsd.sgml.mk tuning.
(somebody with better English, please check!)
BTW: Next: entry have wrong name "Network Communications"
in Locale Setup although points to right direction.
Looks like sgmlfmt bug...
with these files MUST understand what a `make release' does before
making changes like this or get nasty-grams from me when my builds start
falling over. In fact, if they can't test "make release" after making
such changes then they *should leave these files completely alone*.
Thank you.
opt_smp_invltlb.h
from:
SMPHDRS= opt_smp.h opt_smp_invltlb.h
SMP_INVLTLB is no longer a valid config option, the invalidation of the TLB
via inter-CPU IPIs is now standard when APIC_IO is used.
file so that we fail if it isn't already installed. The bootstrap
is now done by `make install' in the top-level src directory. As
well as being gross, the rule didn't actually work for src trees
other than /usr/src, and this is difficult to fix since the whole
src tree may not exist.
(default: IS_DEPENDED?=install) target on the depended port, call
DEPENDS_TARGET (default: install) from the depending port.
Other than being more flexible (some ports don't require the
dependency to be fully installed: see ghostscript4), this seems
like a more natural thing to do. (I never understood the
convoluted logic that was used before.)
By building packages with "DEPENDS_TARGET=package", I can avoid
file-sharing problems (like gs3 binary going into the gs4
package).
(2) Add new variable PATCH_SITE_SUBDIR and separate it from
MASTER_SITE_SUBDIR. Fixes linuxls port and is a correct thing to
do anyway.
Initially suggested and reviewed by: fenner
(3) Add new variable MASTER_SITE_LOCAL for local ports. Defaults to
LOCAL_PORTS subdir on ftp.freebsd.org's distfiles dir.
Submitted by: jkh
make world fails when it tries to build LKMs because the files
opt_smp.h
opt_smp_invltbl.h
are missing.
This patch to /usr/src/share/mk/bsd.kmod.mk is a temporary workaround.
Note that LKMs built in this way may or may NOT work properly with an
SMP kernel.
Fixed back to front -X and -x strip flags in .m.o and .m.po rules.
Fixed disordered .m.o and .m.po rules. What is .m?
Stripping probably should be removed. It makes problems in library
functions hard to debug...
for how to use gcc to invoke the linker only.
Removed `.if 0'ed support for not creating intermediate object files.
Removed unused include of bsd.libnames.mk (LDONLY had the last reference
to it).
Removed stale misplaced comment about MANDEPEND.
means.
(2) Change MASTER_SITE_GNU etc. to use += instead of ?=, so users can
specify a local mirror in /etc/make.conf and still get the full
fallback in case something is missing.
Submitted by: Narvi <narvi@haldjas.folklore.ee>
(3) Skip port if USE_X11 or USE_IMAKE is defined and /usr/X11R6
doesn't exist.
Submitted by: imp
(4) Add "-" in front of rmdir of ${DISTDIR}/${DIST_SUBDIR} in
distclean target; the directory might not be empty because the
subdir is shared with some other ports' distfiles.
