Add the entry for the Yano U640MO-03 MO drive. (ifdef-0-ed out for now)
Fix a hack were an original buffer was modified instead of copied
(cmd[] -> (*rcmd)[])
Submitted by: Iwasa Kazmi <kzmi@ca2.so-net.ne.jp>
instead of the requested length. Otherwise all transfers look like 0 byte
transfers to CAM.
Submitted by: Iwasa Kazmi <kzmi@ca2.so-net.ne.jp>
2) Finalise the command in the case of CBI transfers with CCI (command
completion interrupt).
3) Remove a redundant bzero of a buffer.
idea either) in ufs_extattr_rm.
o More completely fill out the local_aio structure when writing out the
zero'd extended attribute in ufs_extattr_rm -- previoulsy, this worked
fine, but probably should not have. This corrects extraneous warnings
about inconsistent inodes following file deletion.
Reviewed by: jedgar
ufs_extattr_rm.
o Make both reporting locations report the function name where the
inconsistency is discovered, as well as the inode number in question.
Reviewed by: jedgar
The pccard_function_init() call creates a bunch of inactive resources
that are persistant and configured on demand. When the child driver
"allocates" a resource it is connected up to one of these. When the
child releases the resource, we should not delete our copy, just
deactivate it again. Otherwise there is nothing to recreate it again
after several probe functions have run and done an alloc/release cycle.
INVARIANTS shows 0xdeadc0de without this.
More work is needed to do a sweep though the pccard_function_disable()
call to actually delete the resources for real. Right now, we leak
memory on eject (at best), so Dont Do That(TM) yet. This affects
16 bit pccards on a cardbus bridge only. This will be fixed soon, but
for now it gets the cards working.
Reviewed by: imp
to match the pccard.conf file. There are more ID's that need adding, but
these seem to be the common ones.
This was committed on an ep0 interface under NEWCARD:
ep0: <3Com 3c589 10Mbps Ethernet> at port 0x300-0x30f irq 9 function 0 config 1 on pccard1
ep0: Ethernet address 00:10:4b:df:48:57
Reviewed by: imp
attribute read--the offset is required to be 0 by an earlier check,
meaning that it will always be within the scope of the attribute data.
This change should have no impact on executed code paths other than
removing the unnecessary check: please report if any new failures
start to occur as a result.
Obtained from: TrustedBSD Project
to conform to style(9), plus one other convention that I use:
o Declare variables at the start of the function, rather than in blocks
when it doesn't help understanding (mine).
o 80 column limit.
o BSD style statement continuation, rather than "gnu" style.
bus to use. We need to set it here.
This fixes the problem where a probe routine establishes and
disestablishes the interrupt and then we get a panic in the probe
routine.
However, we pass the pointer to the interrupt hanlder count to the
parent bus, which writes its own cookie there, so there may be some
problems with that which isn't apparent at the moment.
Commit made from: laptop running NEWCARD with sn driver (which works,
but gets the wrong ethernet address).
o Fix OLDCARD to use the new interface.
o Rename the offsetp argument to deltap to more closely reflect what it
is returning (it returns the delta from the requested value to the actual
value).
o Remove duplicate $FreeBSD$ in pccbb.c
o Allow deltap to be NULL.
o Convert new isa pcic driver and add XXX comments that this function isn't
actually implemented there (which means that NEWCARD pccard stuff won't
work there until it is).
o Revert attempts to make old inferface work in NEWCARD.
Subitted by: peter (Parts of the new version code)
compiled under newcard yet. ep works just fine under newcard with the
missing ID matching code added (not committed yet):
ep0: <3Com 3c589 10Mbps Ethernet> at port 0x300-0x30f irq 9 function 0
config 1 on pccard1
ep0: Ethernet address 00:10:4b:df:48:57
by even a compile of the OLDCARD code, was unapproved by me the keeper
of OLDCARD and broke OLDCARD and the ray driver.
Adjust new code to cope with the older interface.
If the interface changes in the future, it ***MUST*** be cleared by me
so that the OLDCARD impacts taken into account. It code in card_if.m
is used jointly by both OLDCARD and NEWCARD.
gets the cardbus code to compile, and I was successfully able to map
the CIS into high memory and probe/attach a 16 bit pccard.
Jonathan: feel free to replace this with your version if you want -
this is an expedient hack to get things to build and appear to work.
as the previous line already tells us we are in rc.${MACHINE_ARCH}. This
also allows more syscons configuration messages during startup to fit on
one line.
Reviewed by: dougb
scanner/parser. FreeBSD recently made 'flex' its default implementation
of 'lex'. One of the incompatibilities of 'flex' vs. 'lex' is that
if you longjmp() out of the scanner, you must call yyrestart()
before doing another scan (as documented in flex(1)). So add an
invocation to yyrestart() in lex_init(). This change should be
backwards compatible with the original 'lex'.
PR: bin/24116
when an X11-forwarded client was closed. For some reason, sshd didn't
disable the SIGPIPE exit handler and died a horrible death (well, okay,
a silent death really). Set SIGPIPE's handler to SIG_IGN.
- The stack was getting smashed by __grow_type_table()
- reallocf() was being called with the wrong pointer
- The maximum argument number was being incorrectly computed
PR: misc/23521
allocation not succeeding.
In this case, make sure the driver doesn't leak any memory by freeing all
necessary buffers; make sure to loop and free all the previously allocated
mbufs in this routine.
Reviewed by: alfred
symbols in globals.s.
PCPU_GET(name) returns the value of the per-cpu variable
PCPU_PTR(name) returns a pointer to the per-cpu variable
PCPU_SET(name, val) sets the value of the per-cpu variable
In general these are not yet used, compatibility macros remain.
Unifdef SMP struct globaldata, this makes variables such as cpuid
available for UP as well.
Rebuilding modules is probably a good idea, but I believe old
modules will still work, as most of the old infrastructure
remains.
non-threaded programs. This provides threaded programs with the
needed exception frame symbols.
parts submitted by: Max Khon <fjoe@iclub.nsu.ru>
PR: 23252
- pccbb no longer needs to remember whether a card is inserted.
- pccbb reissues insertion on load of cardbus/pccard modules.
- got rid of unnecessary delays in power functions.
- Cardbus children are no longer deleted if probe/attach fails.
- non-attached child devices are reprobed at driver_added.
* CARD interface to read CIS
- added card_cis_read/card_cis_free interface to read arbitrary CIS
data. This currently is only implemented in cardbus.
* pccard begins to work
- pccard can now use higher memory space (and uses it by default).
- set_memory_offset interface changed.
- fixed ccr access, which was broken at multiple locations.
- implement an interrupt handler - pccard can now share interrupts.
- resource alloc/release/activate/deactivate functions gutted: some
resources are allocated by the bridge before the child device is
probed or attached. Thus the resource "belongs" to the bridge, and
the pccard_*_resource functions need to fudge the owner/rid.
- changed some error conditions to panics to speed debugging.
* Mutex fix - Giant is entered at the beginning of thread
as multi-processor kernels. The old way made it difficult for kernel
modules to be portable between uni-processor and multi-processor
kernels. It is no longer necessary to jump through hoops.
- always load %fs with the private segment on entry to the kernel
- change the type of the self referntial pointer from struct privatespace
to struct globaldata
- make the globaldata symbol have value 0 in all cases, so the symbols
in globals.s are always offsets, not aliases for fields in globaldata
- define the globaldata space used for uniprocessor kernels in C, rather
than assembler
- change the assmebly language accessors to use %fs, add a macro
PCPU_ADDR(member, reg), which loads the register reg with the address
of the per-cpu variable member
