SVCXPTR structure returned by them, it was possible for the structure
to be free'd before svc_reg() had been completed using the structure.
This patch acquires a reference count on the newly created structure
that is returned by svc_[dg|vc|tli|tp]_create(). It also
adds the appropriate SVC_RELEASE() calls to the callers, except the
experimental nfs subsystem. The latter will be committed separately.
Submitted by: dfr
Tested by: pho
Approved by: kib (mentor)
in the type field of system call tables. Specifically, one can now use
the 'NO*' types as flags in addition to the 'COMPAT*' types. For example,
to tag 'COMPAT*' system calls as living in a KLD via NOSTD. The COMPAT*
type is required to be listed first in this case.
- Add new functions 'type()' and 'flag()' to the embedded awk script in
makesyscalls.sh that return true if a requested flag is found in the
type field ($3). The flag() function checks all of the flags in the
field, but type() only checks the first flag. type() is meant to be
used in the top-level "switch" statement and flag() should be used
otherwise.
- Retire the CPT_NOA type, it is now replaced with "COMPAT|NOARGS" using
the flags approach.
- Tweak the comment descriptions of COMPAT[46] system calls so that they
say "freebsd[46] foo" rather than "old foo".
- Document the COMPAT6 type.
- Sync comments in compat32 syscall table with the master table.
a potential race pointed out by pjd. Also use TAILQ_FOREACH_SAFE to iterate over
dirhashes in ufsdirhash_lowmem(), so that we can continue iterating even after a
dirhash is destroyed.
Suggested by: pjd
Tested by: pho
Approved by: dwmalone (mentor)
- Mark nfsclnt as UNIMPL. It should have been NOSTD instead of NOIMPL back
when it lived in nfsclient.ko, but it was removed from that a long time
ago.
causes both to become inoperative; this apparently was done by the original
IAL code as a workaround for IMEM parity errors which we've not seen so
just disable the reset.
Note this problem does not occur on IXP425 boards. The linux driver does
fuse-resets on each NPE but in the order NPE-A < NPE-B < NPE-C (when probing
for which NPE's are present/operational); we may want to switch to a similar
scheme but for now disable the resets until we see an issue.
with the malloc tag and calls a new back-end, kmem_alloc_contig(), that
allocates the pages and maps them.
The motivations for this change are two-fold: (1) A cache mode parameter
will be added to kmem_alloc_contig(). In other words, kmem_alloc_contig()
will be extended to support the allocation of memory with caller-specified
caching. (2) The UMA allocation function that is used by the two jumbo
frames zones can use kmem_alloc_contig() in place of contigmalloc() and
thereby avoid having free jumbo frames held by the zone counted as live
malloc()ed memory.
operating on the unmounted mount point and freed mount data in case of
forced unmount performed while dvp is unlocked to nget the target vnode.
Add missed calls to m_freem(mrep) there on error exits [1].
Submitted by: rmacklem [1]
Tested by: pho
MFC after: 2 weeks
missing it.
Remove the "hidden" kernel only include of vimage.h from ip_var.h added
with the very first Vimage commit r181803 to avoid further kernel poisoning.
1) All bit disappears
2) The two sets of gaps (nr and non-nr) are
disjointed, you don't have gaps struck in
both places.
This adjusts us to coorespond to the new draft. Still
to-do, cleanup the code so that there are only one set
of sack routines (original NR-Sack done by E cloned all
sack code).
kmem_alloc() and kmem_malloc(). Specifically, defer the setting of the
page's valid bits until contigmapping() when the mapping is known to be
successful.
normally taken from the hints file so this should have no effect
o set the port address "just in case"
o add NPE-A support to the tx done qmgr callback
Actually, as it did receive few tuning, the support is disabled by
default, but it can opt-in with the option ADAPTIVE_LOCKMGRS.
Due to the nature of lockmgrs, adaptive spinning needs to be
selectively enabled for any interested lockmgr.
The support is bi-directional, or, in other ways, it will work in both
cases if the lock is held in read or write way. In particular, the
read path is passible of further tunning using the sysctls
debug.lockmgr.retries and debug.lockmgr.loops . Ideally, such sysctls
should be axed or compiled out before release.
Addictionally note that adaptive spinning doesn't cope well with
LK_SLEEPFAIL. The reason is that many (and probabilly all) consumers
of LK_SLEEPFAIL are mainly interested in knowing if the interlock was
dropped or not in order to reacquire it and re-test initial conditions.
This directly interacts with adaptive spinning because lockmgr needs
to drop the interlock while spinning in order to avoid a deadlock
(further details in the comments inside the patch).
Final note: finding someone willing to help on tuning this with
relevant workloads would be either very important and appreciated.
Tested by: jeff, pho
Requested by: many
t_rcvtime, t_starttime, t_rtttime, t_bw_rtttime, ts_recent_age,
t_badrxtwin.
- Change t_recent in struct timewait from u_long to u_int32_t to match
the type of the field it shadows from tcpcb: ts_recent.
- Change t_starttime in struct timewait from u_long to u_int to match
the t_starttime field in tcpcb.
Requested by: bde (1, 3)
warning: no time-of-day clock registered, system time will not be set accurately
Provide hints to atrtc on amd64 since it's not being described in
ACPI on some systems.
Reviewed by: jhb
The code that was in place in exit1() was mainly based on code from the
old TTY layer. The main reason behind this, was because at one moment I
ran a system that had two TTY layers in place at the same time. It is
now sufficient to do the following:
- Remove references from the session structure to the TTY vnode and the
session leader.
- If we have a controlling TTY and the session used by the TTY is equal
to our session, send the SIGHUP.
- If we have a vnode to the controlling TTY which has not been revoked,
revoke it.
While there, change sys/kern/tty.c to use s_ttyp in the comparison
instead of s_ttyvp. It should not make any difference, because s_ttyvp
can only become null when the session leader already left, but it's
nicer to compare against the proper value.
any open file descriptors >= 'lowfd'. It is largely identical to the same
function on other operating systems such as Solaris, DFly, NetBSD, and
OpenBSD. One difference from other *BSD is that this closefrom() does not
fail with any errors. In practice, while the manpages for NetBSD and
OpenBSD claim that they return EINTR, they ignore internal errors from
close() and never return EINTR. DFly does return EINTR, but for the common
use case (closing fd's prior to execve()), the caller really wants all
fd's closed and returning EINTR just forces callers to call closefrom() in
a loop until it stops failing.
Note that this implementation of closefrom(2) does not make any effort to
resolve userland races with open(2) in other threads. As such, it is not
multithread safe.
Submitted by: rwatson (initial version)
Reviewed by: rwatson
MFC after: 2 weeks
by if_free (w/o doing if_attach); move ifq_attach to if_alloc and
rename ifq_attach/detach to ifq_init/ifq_delete to better identify
their purpose
Reviewed by: jhb, kmacy
Right now the only way to make tcsetsid(3)/TIOCSCTTY work, is by
ensuring the session leader is dead. This means that an application that
catches SIGHUPs and performs a sleep prevents us from assigning a new
session leader.
Change the code to make it work on revoked TTYs as well. This allows us
to change init(8) to make the shutdown script run in a more clean
environment.
parameter "vnet" when it is created, a new vnet instance will be created
along with the jail. Networks interfaces can be moved between prisons
with an ioctl similar to the one that moves them between vimages.
For now vnets will co-exist under both jails and vimages, but soon
struct vimage will be going away.
Reviewed by: zec, julian
Approved by: bz (mentor)
DP83065 Saturn Gigabit Ethernet controllers. These are the successors
of the Sun GEM controllers and still have a similar but extended transmit
logic. As such this driver is based on gem(4).
Thanks to marcel@ for providing a Sun Quad GigaSwift Ethernet UTP (QGE)
card which was vital for getting this driver to work on architectures
not using Open Firmware.
Approved by: re (kib)
MFC after: 2 weeks
variables set via the getcredhostid() function. I also changed the type
of ci_hostid to "unsigned long" so that it matches what is returned by
getcredhostid(). Although "struct svc_rpc_gss_clientid" goes on the wire
during RPCSEC_GSS, it is just a variable # of opaque bytes to the client,
so it doesn't matter how much storage ci_hostid uses.
Approved by: kib (mentor)
allocated. MSI have strict vectors allocation requirements, which are not
satisfied now during reallocation. This is not the best possible solution,
but better then just broken, as it was.
No objections: current@, arch@, jhb@
FEEDER_RATE_PRESET "OVERSAMPLING_FACTOR:X .. .." where
X = log2(oversampling factor).
- Lower down default filter oversampling factor from 128
(log2 = 7) to 32 (log2 = 5), saving worth of 80 Kb.
The use of better polynomial interpolator will raise
its conversion quality/accuracy to match (or slightly
better) with previous settings.
- Bump driver version.
coefficients quality:
- Linear interpolator for oversampling factor larger and equal
than 4096 (log2 = 12).
- Quadratic interpolator for oversampling factor larger and equal
than 256 (log2 = 8).
Default oversampling factor (128 ~ log2 = 7) will use OPT32X, which
provides better accuracy.
memory with 4MB pages was added to pmap_object_init_pt(). This code
assumes that the pages of a OBJT_DEVICE object are always physically
contiguous. Unfortunately, this is not always the case. For example,
jhb@ informs me that the recently introduced /dev/ksyms driver creates
a OBJT_DEVICE object that violates this assumption. Thus, this
revision modifies pmap_object_init_pt() to abort the mapping if the
OBJT_DEVICE object's pages are not physically contiguous. This
revision also changes some inconsistent if not buggy behavior. For
example, the i386 version aborts if the first 4MB virtual page that
would be mapped is already valid. However, it incorrectly replaces
any subsequent 4MB virtual page mappings that it encounters,
potentially leaking a page table page. The amd64 version has a bug of
my own creation. It potentially busies the wrong page and always an
insufficent number of pages if it blocks allocating a page table page.
To my knowledge, there have been no reports of these bugs, hence,
their persistance. I suspect that the existing restrictions that
pmap_object_init_pt() placed on the OBJT_DEVICE objects that it would
choose to map, for example, that the first page must be aligned on a 2
or 4MB physical boundary and that the size of the mapping must be a
multiple of the large page size, were enough to avoid triggering the
bug for drivers like ksyms. However, one side effect of testing the
OBJT_DEVICE object's pages for physical contiguity is that a dubious
difference between pmap_object_init_pt() and the standard path for
mapping devices pages, i.e., vm_fault(), has been eliminated.
Previously, pmap_object_init_pt() would only instantiate the first
PG_FICTITOUS page being mapped because it never examined the rest.
Now, however, pmap_object_init_pt() uses the new function
vm_object_populate() to instantiate them all (in order to support
testing their physical contiguity). These pages need to be
instantiated for the mechanism that I have prototyped for
automatically maintaining the consistency of the PAT settings across
multiple mappings, particularly, amd64's direct mapping, to work.
(Translation: This change is also being made to support jhb@'s work on
the Nvidia feature requests.)
Discussed with: jhb@
In the past there have been some reports of PRINTF_BUFR_SIZE not
functioning correctly. Instead of having garbled console messages, we
should just see whether the issues are still there and analyze them.
Approved by: re
compiler doing argument type checking. Since the prototypes in
kgss_if.h used the generic gss_ctx_id_t for the context argument,
but the functions in sys/kgssapi/krb5/krb5_mech.c used the
KerberosV specific context argument, the file would no longer build.
This patch fixes it so it will build by replacing the argument with
a gss_ctx_id_t one and setting a local "struct krb5_context *" variable
to it for use by the function.
Reviewed by: dfr
Approved by: kib (mentor)
queue was drained. It will never fire for a directly dispatched packet.
You will most likely never want to use this for any ordinary netisr usage
and you will never blame netisr in case you try to use it and it does
not work as expected.
Reviewed by: rwatson
Characters between 0x07 and 0x0d are now also mapped, which means we can
display almost 256 different characters. Also remap certain types of
dashes and quotes, which means we can finally read our manual pages
without red question marks in them.
Submitted by: Christoph Mallon
bits but isi_state did not follow; expand it to 32 bits and pad to
maintain alignment. Note this is an incompatible change that
requires rebuilding of user applications.
Submitted by: rpaulo, cbzimmer, avatar
of the DP83861 and DP83891.
- Reset the PHY during attach so it's in a known state.
- Add a comment describing why we hardwire 10baseT support in
the BMSR.
- Always explicitly set IFM_HDX for half-duplex. [1]
Obtained from: OpenBSD [1]
MFC after: 2 weeks
server would crash because the Solaris10 client would attempt to use
Sun's NFSACL protocol, which FreeBSD doesn't support. When the server
generated the error reply via svcerr_noprog(), it would cause a crash
because it would try and wrap a NULL reply. According to RFC2203, no
wrapping is required for error cases. This one line change avoids
wrapping of NULL replies.
Reviewed by: dfr
Approved by: kib (mentor)
pv entries surpasses the high water mark. The problem was that the page
daemon would only be awakened the first time that the high water mark was
surpassed. (The variable "pagedaemon_waken" is a non-working vestige of
FreeBSD 4.x, in which it was external and reset by the page daemon whenever
it ran. This reset allowed subsequent wakeups by the pv entry allocator.)
There is an external use in the opensolaris code.
I am not sure how this ever worked but I have seen two reports of:
link_elf: symbol hardlink_check_uid undefined
lately.
Reported by: Scott Ullrich (sullrich gmail.com), pfsense
Reported by: Mister Olli (mister.olli googlemail.com)
Add a small Unicode-to-CP437 remapping table to at least demonstrate
that the terminal emulator is perfectly capable of handling UTF-8. This
will of course break if the user loads a different font map, but it at
least allows people to give it a try.
I can now see the box drawing in dialog(1) and the arrows in mutt(1)
correctly.
Because our rc scripts also open the /etc/ttyv* nodes, it revokes the
console, preventing startup messages from being displayed.
I really have to think about this. Maybe we should just give the console
its own TTY and let it build on top of other TTYs. I'm still not sure
what to do with input handling there.
actual implementation.
Remove the accessor functions for the compiled out case, just returning
"unavail" values. Remove the kernel conditional from the header file as
it is no longer needed, only leaving the externs.
Hide the improperly virtualized SYSCTL/TUNABLE for the flowtable size
under the kernel option as well.
Reviewed by: rwatson
Even though I thought I fixed the staircase issue (and I was no longer
able to reproduce it), I got some reports of the issue still being
there. It turns out the staircase effect still occurred when
/dev/console was kept open while killing the getty on the same TTY
(ttyv0).
For some reason I can't figure out how the old TTY code dealt with that,
so I assume the issue has always been there. I only exposed it more by
merging consolectl with ttyv0, which means that the issue was present,
even on systems without a serial console.
I'm now marking the console device as being closed when closing the
regular TTY device node. This means that when the getty shuts down,
init(8) will open /dev/console, which means the termios attributes will
always be reset in this case.
so that it isn't exposured unless needed. In particular this means
that it's easier to tune the memory layout based on board details.
While here, remove inclusion of <machine/intr.h> from mvreg.h. This
also contains exposure to SoC specifics in MI drivers, because NIRQ
depends on the SoC.
Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry
Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele
(julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense
team, and all people who used / tried the NAT-T patch for years and
reported bugs, patches, etc...
X-MFC: never
Reviewed by: bz
Approved by: gnn(mentor)
Obtained from: NETASQ
It seems that current code should pass the check.
This commit should not lead to any changes in compiled code.
From now on a warning shall be produced if kobj method implementation
function has a mismatching signature.
Verified by: md5
Reviewed by: imp
Approved by: jhb (mentor)
Big thanks to Christoph Mallon for the idea/code!
This construct has benefit of sticking much stricter to C standard and thus
keeping more compilers happy as Clang doesn't like the current construct
because it doesn't treat FUNC != NULL as a compile-time constant.
The checking version is still under 'notyet'.
Pointed out by: ed
Submitted by: Christoph Mallon <christoph.mallon@gmx.de>
Clang help by: rdivacky
Reviewed by: imp
Approved by: jhb
in symtab_get method symtab parameter is made constant as this reflects
actual intention and usage of the method
Reviewed by: imp, current@
Approved by: jhb (mentor)
network stack when reentering the inbound path from netgraph, and
force queueing of mbufs at the outbound netgraph node.
The mechanism relies on two components. First, in netgraph nodes
where outbound path of the network stack calls into netgraph, the
current thread has to be appropriately marked using the new
NG_OUTBOUND_THREAD_REF() macro before proceeding to call further
into the netgraph topology, and unmarked using the
NG_OUTBOUND_THREAD_UNREF() macro before returning to the caller.
Second, netgraph nodes which can potentially reenter the network
stack in the inbound path have to mark their inbound hooks using
NG_HOOK_SET_TO_INBOUND() macro. The netgraph framework will then
detect when there is a danger of a call graph looping back from
outbound to inbound path via netgraph, and defer handing off the
mbufs to the "inbound" node to a worker thread with a clean stack.
In this first pass only the most obvious netgraph nodes have been
updated to ensure no outbound to inbound calls can occur. Nodes
such as ng_ipfw, ng_gif etc. should be further examined whether a
potential for outbound to inbound call looping exists.
This commit changes the layout of struct thread, but due to
__FreeBSD_version number shortage a version bump has been omitted
at this time, nevertheless kernel and modules have to be rebuilt.
Reviewed by: julian, rwatson, bz
Approved by: julian (mentor)
cksum related function calls, sometimes related to offload features
from what I could see.xi
It would be good if the offload functionality would be properly
#ifdefed but the other calls to cksum related functions are a more
general problem also elswhere in the network stack.
use IPv4/v6 for inter-node communication (according to my reading).
Properly wrap the carp callouts in INET || INET6 and refelect this
in sys/conf/files as well. While in theory this should be ok,
it might be a bit optimistic to think that carp could build with
inet6 only[1].
Discussed with: mlaier [1]
struct bio to store classification information, and a hook
for classifier functions that can be called by g_io_request().
This code is from Fabio Checconi as part of his GSOC work.
we receive the AssocResp, so we can only set ni_txparms properly
at that point. To make this possible make node_setuptxparms public
as ieee80211_node_setuptxparms.
- Preallocate some memory for ACPI tasks early enough. We cannot use
malloc(9) any more because spin mutex may be held here. The reserved
memory can be tuned via debug.acpi.max_tasks tunable or ACPI_MAX_TASKS
in kernel configuration. The default is 32 tasks.
- Implement a custom taskqueue_fast to wrap the new memory allocation.
This implementation is not the fastest in the world but we are being
conservative here.
be nfs_nfsdport.c and nfs_nfsdcache.c are the problem only but we need
to mark all or we will run into problems at link time.
One is because of calling an INET specific function, the other is
because of VIMAGE putting all tcp* into struct vnet_inet.
Both are general problems throughout the entire stack and not a fault
of the NFS implementation and will need to be addressed in the future.
#error "Huh? if_gre without inet?"
According to my reading we still only support encapsulating datagrams
into IPv4 and not IPv6 so there is no optional | gre inet6 yet.
subsystem. Add a test for VI_DOOMED just after ncl_upgrade_vnlock() in
ncl_bioread_check_cons(). This is required since it is possible
for the vnode to be vgonel()'d while in ncl_upgrade_vnlock() when
a forced dismount is in progress. Also, move the check for VI_DOOMED
in ncl_vinvalbuf() down to after ncl_upgrade_vnlock() and replace the
out of date comment for it.
Approved by: kib (mentor)
nfs_bioread_check_cons(). This is required since it is possible
for the vnode to be vgonel()'d while in nfs_upgrade_vnlock() when
a forced dismount is in progress. Also, move the check for VI_DOOMED
in nfs_vinvalbuf() down to after nfs_upgrade_vnlock() and replace the
out of date comment for it.
Submitted by: jhb
Tested by: pho
Approved by: kib (mentor)
MFC after: 1 month
vnode interlock to protect the knote fields [1]. The locking assumes
that shared vnode lock is held, thus we get exclusive access to knote
either by exclusive vnode lock protection, or by shared vnode lock +
vnode interlock.
Do not use kl_locked() method to assert either lock ownership or the
fact that curthread does not own the lock. For shared locks, ownership
is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared
lock not owned by curthread, causing false positives in kqueue subsystem
assertions about knlist lock.
Remove kl_locked method from knlist lock vector, and add two separate
assertion methods kl_assert_locked and kl_assert_unlocked, that are
supposed to use proper asserts. Change knlist_init accordingly.
Add convenience function knlist_init_mtx to reduce number of arguments
for typical knlist initialization.
Submitted by: jhb [1]
Noted by: jhb [2]
Reviewed by: jhb
Tested by: rnoland
connect failed, the thread would be left stuck in msleep()
indefinitely, since it would call msleep() again for the case
where rc_client == NULL. Change the loop criteria and the if just
after the loop, so that this case is handled correctly.
Reviewed by: dfr
Approved by: kib (mentor)
instead of unsigned longs. This fixes a few overflow edge cases on 64-bit
platforms. Specifically, if an idle connection receives a packet shortly
before 2^31 clock ticks of uptime (about 25 days with hz=1000) and the keep
alive timer fires after 2^31 clock ticks, the keep alive timer will think
that the connection has been idle for a very long time and will immediately
drop the connection instead of sending a keep alive probe.
Reviewed by: silby, gnn, lstewart
MFC after: 1 week
So properly hide the already #ifdef SCTP code with
#if defined(INET) || defined(INET6) as well to get us
closer to a non-INET/INET6 kernel.
Discussed with: tuexen [1]
be NULL or derefenced memory may become free at arbitrary moment.
Lock the vnode in cd9660, devfs and pseudofs implementation of VOP_IOCTL
to prevent reclaim; check whether the vnode was already reclaimed after
the lock is granted.
Reported by: georg at dts su
Reviewed by: des (pseudofs)
MFC after: 2 weeks
routine and save the resources using a chipset-data structure. Use these
preallocated resources to setup resources for the SATA channels to avoid
asking the PCI bus to allocate the same BAR multiple times.
Tested by: bms
MFC after: 1 week
aim/machdep.c:
- the RI status register bit needs to be set when doing the mtmsrd 64-bit
instruction test
- psim doesn't implement the dcbz instruction so the run-time cacheline
test fails. Set the cachline size to 32 to avoid infinite loops in
future calls to __syncicache()
aim/platform_chrp.c:
- if after iterating through / and a name property of "cpus" still isn't
found, just search directly for '/cpus'.
- psim doesn't put a "reg" property on it's cpu nodes, so assume 0
since it is uniprocessor-only at this point
powerpc/openpic.c
- the number of CPUs reported is 1 too many on psim's openpic
Reviewed by: nwhitehorn
MFC after: 1 week (openpic part)
and use malloc() instead if/when it is necessary.
The problem is less relevant in previous versions because
the variable involved (tmp_pipe) is much smaller there.
Still worth fixing though.
Submitted by: Marta Carbone (GSOC)
MFC after: 3 days
In case of !INET we will not have a timestamp on the trace for now
but that might only affect spx debugging as long as INET6 requires
INET.
Reviewed by: rwatson (earlier version)
- clear the head pointer immediately before using it, so there is
no chance of mistakes;
- call reap_rules() unconditionally. The function can handle a NULL
argument just fine, and the cost of the extra call is hardly
significant given that we do it rarely and outside the lock.
MFC after: 3 days
controller. These controllers are also known as L1C(AR8131) and
L2C(AR8132) respectively. These controllers resembles the first
generation controller L1 but usage of different descriptor format
and new register mappings over L1 register space requires a new
driver. There are a couple of registers I still don't understand
but the driver seems to have no critical issues for performance and
stability. Currently alc(4) supports the following hardware
features.
o MSI
o TCP Segmentation offload
o Hardware VLAN tag insertion/stripping
o Tx/Rx interrupt moderation
o Hardware statistics counters(dev.alc.%d.stats)
o Jumbo frame
o WOL
AR8131/AR8132 also supports Tx checksum offloading but I disabled
it due to stability issues. I'm not sure this comes from broken
sample boards or hardware bugs. If you know your controller works
without problems you can still enable it. The controller has a
silicon bug for Rx checksum offloading, so the feature was not
implemented.
I'd like to say big thanks to Atheros. Atheros kindly sent sample
boards to me and answered several questions I had.
HW donated by: Atheros Communications, Inc.
by prefetched than helped. On i386 systems and systems with less than 4GB,
prefetch is now disabled by default. I've added a prefetch enable tunable, to
enable prefetching for those systems. The prefetch disable tunable will continue
to unconditionally disable prefetching.
driver should read updated status back after issuing a SCB command.
To send a command to controller and read updated status back,
driver should synchronize both memory read and write operations
with device. Fix bus_dmamap_sync operation specifier used in
fxp_dma_wait() by adding both memory read and memory write
operations.
If packet leaves ipfw to other kernel subsystem (dummynet, netgraph, etc)
it carries pointer to matching ipfw rule. If this packet then reinjected back
to ipfw, ruleset processing starts from that rule. If rule was deleted
meanwhile, due to existed race condition panic was possible (as well as
other odd effects like parsing rules in 'reap list').
P.S. this commit changes ABI so userland ipfw related binaries should be
recompiled.
MFC after: 1 month
Tested by: Mikolaj Golub
the implementation can guarantee forward progress in the event of
a stuck interrupt or interrupt storm. This is especially critical
for fast interrupt handlers, as they can cause a hard hang in that
case. When first called, arm_get_next_irq() is passed -1.
Obtained from: Juniper Networks, Inc.
vm_map_pmap_enter(). The immediate effect of this change is that automatic
prefaulting by mmap() for small mappings is performed on POSIX shared memory
objects just the same as it is on ordinary files.
o don't increment extracted tid, this was a vestige of IEEE80211_NONQOS_TID
being defined as 0 (w/ real tid's +1)
o handle 4-address frames (add IEEE80211_IS_DSTODS to check if an 802.11
header is DSTODS)
Submitted by: cbzimmer
Reviewed by: avatar
for FreeBSD-CURRENT, the code that checked for and returned the
error was broken. Change it to check for VI_DOOMED set after
vn_lock() and return an error for that case. I believe this
should only happen for forced dismounts.
Approved by: kib (mentor)
probe. The current device order is unchanged. This commit just adds the
infrastructure and ABI changes so that it is easier to merge later changes
into 8.x.
- Driver attachments now have an associated pass level. Attachments are
not allowed to probe or attach to drivers until the system-wide pass level
is >= the attachment's pass level. By default driver attachments use the
"last" pass level (BUS_PASS_DEFAULT). Driver's that wish to probe during
an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which
accepts the pass level as an additional parameter.
- A new method BUS_NEW_PASS has been added to the bus interface. This
method is invoked when the system-wide pass level is changed to kick off
a rescan of the device tree so that drivers that have just been made
"eligible" can probe and attach.
- The bus_generic_new_pass() function provides a default implementation of
BUS_NEW_PASS(). It first allows drivers that were just made eligible for
this pass to identify new child devices. Then it propogates the rescan to
child devices that already have an attached driver by invoking their
BUS_NEW_PASS() method. It also reprobes devices without a driver.
- BUS_PROBE_NOMATCH() is only invoked for devices that do not have
an attached driver after being scanned during the final pass.
- The bus_set_pass() function is used during boot to raise the pass level.
Currently it is only called once during root_bus_configure() to raise
the pass level to BUS_PASS_DEFAULT. This has the effect of probing all
devices in a single pass identical to previous behavior.
Reviewed by: imp
Approved by: re (kib)
a _BBN value of 0 if it was for the first bridge encountered since some
older systems returned _BBN of 0 for all bridges. However, some newer
systems enumerate bridges with non-zero _BBN before bus 0 which is
perfectly valid. Handle both cases by trusting the first bridge that has
a _BBN of 0 and falling back to reading from non-standard config registers
only for subsequent bridges with a _BBN of 0. We also only perform this
check for segment (domain) 0. We assume that _BBN is always correct
for segments other than 0.
Tested by: Josef Moellers josef.moellers at fujitsu
MFC after: 1 week
- Interpolate stat/prof clock using clkintr() in a similar fashion to
local APIC timer, since statclock usually run slower.
- Liberate hardclockintr() from taking the burden of handling both stat
and prof clock interrupt. Instead, send IPIs within clkintr() to handle
those.
only during initial booting process, while there are laptops/BIOSes that
tend to act 'smarter' by force enabling C1E if the main power adapter
being pulled out, rendering previous workaround ineffective. Given the
fact that we still rely on local APIC to drive timer interrupt, this
workaround should keep all Turion (probably Phenom too) X\d+ alive whether
its on battery power or not.
URL: http://lists.freebsd.org/pipermail/freebsd-acpi/2008-April/004858.htmlhttp://lists.freebsd.org/pipermail/freebsd-acpi/2008-May/004888.html
Tested by: Peter Jeremy <peterjeremy at optushome d com d au>
the "Get Scan Line Length" function fails, as it does in Parallels
(in Version 2.2, Build 2112 at least).
PR: i386/127367
Obtained from: DragonFly
Submitted by: Pedro Giffuni
MFC after: 1 month
- The return value should be a signed integer, because -1 means failure.
- The c variable should be unsigned, to force it to be zero-extended
when returned.
Reported by: Andreas Tobler <andreast-list fgznet ch>
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.
Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
It turns out our compiler in stable/7 can't build this code anymore.
Even though my opinion is that those people should just run `make
kernel-toolchain' before building a kernel, I am willing to wait and
commit this after we've branched stable/8.
Requested by: rwatson
