Previous commits have made VM_MIN_KERNEL_ADDRESS its own separate entity,
and rebased the kernel around that address instead of KERNBASE. This commit
pulls the trigger to rebase KERNBASE to a physical load address. The
eventual goal is to align the address with the AIM KERNBASE, but at this
time that's not an option.
Currently a Book-E kernel must be loaded on a 64MB boundary, due to size
issues. The common load address is at the 64MB mark (0x04000000), so simply
make that the default KERNBASE.
As of this commit, Book-E kernels can be loaded and booted with ubldr.
MFC after: 3 weeks
Optimize the exception handler to only save and load the upper word of the
GPRs used in the emulating instruction. This reduces the save/load
overhead, and as a side effect does not overwrite the upper word of any
temporary register.
With this commit I am now able to run editors/abiword and math/gnumeric on a
e500-based system.
MFC after: 1 week
MFC With: r341752,r341751
Right now, aesni_cipher_alloc does a bit of special-casing
for CRYPTO_F_IOV, to not do any allocation if the first uio
is large enough for the requested size. While working on ZFS
crypto port, I ran into horrible performance because the code
uses scatter-gather, and many of the times the data to encrypt
was in the second entry. This code looks through the list, and
tries to see if there is a single uio that can contain the
requested data, and, if so, uses that.
This has a slight impact on the current consumers, in that the
check is a little more complicated for the ones that use
CRYPTO_F_IOV -- but none of them meet the criteria for testing
more than one.
Submitted by: sef at ixsystems.com
Reviewed by: cem@
MFC after: 3 days
Sponsored by: iX Systems
Differential Revision: https://reviews.freebsd.org/D18522
MIPS64 has 64-bit longs, so use uint64_t for it, otherwise uint32_t.
sizeof(long) == sizeof(ptr) for all platforms, so define
atomic_swap_ptr in terms of atomic_swap_long.
Submitted by: hps@
icu is a interrupt concentrator in the CP110 block and gicp
is a gic extension to allow interrupts in the CP block to be turned
into GIC SPI interrupts
Sponsored by: Rubicon Communications, LLC ("Netgate")
The cp110 clock controller controls the clocks and gate of the CP110
hardware block.
Every clock/gate are implemented except the NAND clock.
Sponsored by: Rubicon Communications, LLC ("Netgate")
The first two clocks are for the clusters and their frequencies can be
found reading a register. Then a fixed 1200Mhz clock is present and two
fixed clocks, 'mss' which is 1200 / 6 and 'sdio' which is 1200 / 3.
Sponsored by: Rubicon Communications, LLC ("Netgate")
The pwm subsystem consist of API for PWM controllers, pwmbus to register them
and a pwm(8) utility to talk to them from userland.
Reviewed by: oshgobo (capsicum), bcr (manpage), 0mp (manpage)
Differential Revision: https://reviews.freebsd.org/D17938
When we try to find a source port in pf_get_sport() it's possible that
all available source ports will be in use. In that case we call
pf_map_addr() to try to find a new source IP to try from. If there are
no more available source IPs pf_map_addr() will return 1 and we stop
trying.
However, if sticky-address is set we'll always return the same IP
address, even if we've already tried that one.
We need to check the supplied address, because if that's the one we'd
set it means pf_get_sport() has already tried it, and we should error
out rather than keep trying.
PR: 233867
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18483
I mistakenly added a lock assertion to this routine at the last minute
without confirming it was held during g_mirror_create. It isn't (it isn't
even initialized yet). Mea culpa. Access is exclusive in both callers,
just not always by that particular lock.
Reported by: lwhsu
X-MFC-With: r341840, r341674
If bus_dmamap_load_mbuf() fails following a defrag, the caller of
bwn_dma_tx_start() would free the original mbuf after m_defrag() had
already done so. Fix this by returning the defragged mbuf to the
caller instead. Update bwn_pio_tx_start() similarly for consistency.
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed by: landonf
Tested by: landonf
MFC after: 3 days
admbug: 820
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18342
PR: 217505
Submitted by: John O. Brickley <obryan.brickley@gmail.com>, updated by Maciej Pasternacki <maciej@pasternacki.net>
Reported by: John O. Brickley <obryan.brickley@gmail.com>
MFC after: 1 week
r341674 inadvertently introduced a bug where newer mirror components being
tasted would clear the high sc_flags that are not controlled by component
metadata, such as G_MIRROR_DEVICE_FLAG_TASTING. This could plausibly expose
a small window of time during STARTING where device destruction might race
with mirror component addition, probably resulting in a crash.
Reviewed by: markj
X-MFC-With: r341674
Differential Revision: https://reviews.freebsd.org/D18521
check hash to the filesystem inodes. Access attempts to files
associated with an inode with an invalid check hash will fail with
EINVAL (Invalid argument). Access is reestablished after an fsck
is run to find and validate the inodes with invalid check-hashes.
This check avoids a class of filesystem panics related to corrupted
inodes. The hash is done using crc32c.
Note this check-hash is for the inode itself and not any of its
indirect blocks. Check-hash validation may be extended to also
cover indirect block pointers, but that will be a separate (and
more costly) feature.
Check hashes are added only to UFS2 and not to UFS1 as UFS1 is
primarily used in embedded systems with small memories and low-powered
processors which need as light-weight a filesystem as possible.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
Mainly states of established TCP connections would be affected resulting
in immediate state removal once the number of states is bigger than
adaptive.start. Disabling adaptive timeouts is a workaround to avoid this bug.
Issue found and initial diff by Mathieu Blanc (mathieu.blanc at cea dot fr)
Reported by: Andreas Longwitz <longwitz AT incore.de>
Obtained from: OpenBSD
MFC after: 2 weeks
r336560 was supposed to restore pre-r323954 behaviour when tx_abdicate is
not set (the default case). However, it appears that rather than the drainage
check being made conditional on tx_abdicate being set, it was duplicated
so it occured twice if tx_abdicate was set and once if it was not.
Now when !tx_abdicate, drainage is only checked if the doorbell isn't
pending.
Reported by: lev
MFC after: 1 week
Sponsored by: Limelight Networks
The error was caused by map_ucode() casting a vm_paddr_t to a void *.
Use a uintptr_t instead to match the caller. Fix some style bugs while
here.
Reported by: bde
Reviewed by: bde
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
It is a function call only to accomodate *some* ABIs which install a hook.
They only care for 3 types of limits: DATA, STACK, VMEM
Instead of always calling the func, see at compilation time if the requested
limit is something else and just do the read if so.
Sponsored by: The FreeBSD Foundation
initialize the controller.
According to the datasheet, the old code checks if port 2 (P2E, 0x4) was
the only enabled port (except port 0, which was ignored by mask 0xfe),
and issue a write to the PCS register to disable all but port 0, right
before ahci_ctlr_reset.
Some other operating systems would issue a port enable to all ports, but
since the current code only does the special initialization for ICH8M,
it entirely and rely on BIOS to do the right thing (the alternative
would be https://reviews.freebsd.org/D18300?id=50922 , should we see
reports that we really need to do it).
Reviewed by: mav
MFC after: 3 months
Differential Revision: https://reviews.freebsd.org/D18300
Bootstacks are unused after APs executed sched_throw() in
init_secondary_tail() and started executing on proper idle thread
stack. Add sysinit that detects that the idle thread for each CPU was
scheduled at least once, and free corresponding bootstack.
Slight addition of the code (~200 bytes) is compensated by the saving,
because even on typical small modern desktop CPU we leak 128K of
memory otherwise (4 pages x 8 threads).
Reviewed by: jhb
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18486
There is no reason for it to behave differently from openat(fd, NULL).
Also the handling did not worked because the substituted path was from
the system address space, causing EFAULT.
Submitted by: Jack Halford <jack@gandi.net>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18501
Inline tests for PTE_* bits are easy to read and don't really require a
predicate function, and predicates which operate on a pt_entry_t are
inconvenient when working with L1 and L2 page table entries.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18461
The code was a near exact copy of the code in startup, but it doesn't need
the complexity since the kernel is already relocated. With
VM_MIN_KERNEL_ADDRESS as currently set to KERNBASE, this doesn't cause a
problem, because it's a zero offset. However, when KERNBASE is changed to a
physical load address, it then has a non-zero offset, and ends up with an
invalid stack pointer, causing the AP to hang.
