Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
* flesh out a "get default DFS parameters" routine
* remove the stub that returns NULL
* fix up the enable DFS method to do what FreeBSD does - specifically, allow pe_enabled
to be set/cleared.
This allows the radar pulse reporting code to function, but it doesn't yet
do anything useful.
* add debugging
* disable the manual noise floor calibration and tracking done by the HAL;
this interferes with the normal calibration path and will lock up the RX
side
* don't program short report / priority if they're provided as NOVAL.
under a shared read lock. This patch attempts to upgrade the lock to
an exclusive write lock. If the exclusive write lock fails to be
obtained, the current fragment is not placed at the head of the list.
This portion of the patch was inspired by NetBSD ip_frag.c r1.4 (which
effectively removed the section of code that performed the reordering).
The patch to sys/contrib/ipfilter/netinet/ip_compat.h adds the
MUTEX_TRY_UPGRADE macro to support the patch to ip_frag.c.
The patch to contrib/ipfilter/lib/rwlock_emul.c supports this patch
by emulating the mutex in userspace when exercised by ipftest(1).
Inspired by: NetBSD ip_frag.c r1.4
MFC after: 1 month
Languages like C++17 and Go provide direct support for slice types:
pointer/length pairs. The CloudABI generator now has more complete for
this, meaning that for the C binding, pointer/length pairs now use an
automatic naming scheme of ${name} and ${name}_len.
Apart from this change and some reformatting, the ABI definitions are
identical. Binary compatibility is preserved entirely.
Include netinet/in.h before ip_compat.t which will then check if
IPPROTO_IPIP is defined or not. Doing it the other way round,
ip_compat.h would not find it defined and netinet/in.h then
redefine it.
Although vchiq_build_date and vchiq_build_time are not used in current
vchi driver at the moment, make sure these value will not leak into
build later on if at some point they will be refered in some new
imported code
PR: 215494
Reported by: emaste
MFC after: 1 week
Drop the tracking down to the pmap layer, with optimizations to only track
necessary pages. This should give a (slight) performance improvement, as well
as a stability improvement, as the tracking is already mostly handled by the
pmap layer.
As part of an effort to extend Book-E to the 64-bit world, make the necessary
changes to the DPAA/dTSEC driver set to be integer-pointer conversion clean.
This means no more casts to int, and use uintptr_t where needed.
Since the NCSW source is effectively obsolete, direct changes to the source tree
are safe.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.
Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw
Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.
Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes
buildkernel failed with GCC 5.3 with
error: comparison of constant '852736' with boolean expression is always true
Sponsored by: The FreeBSD Foundation
Linux's copy of the Cavium SDK does not have these non-ASCII characters
and this reduces noise in diffs when comparing the two.
Sponsored by: The FreeBSD Foundation
Don't call pmap_kextract() multiple times, it wastes CPU cycles, which in a high
performance environment can be very expensive.
Inline XX_FindTracker() to allow more optimizations as well.
Since if_addrlist is used only for ipfilter(4), add a macro if_addrlist
in ip_compat.h.
Reviewed by: cy
Differential Revision: https://reviews.freebsd.org/D8059
alpine-hal SerDes file was omitted in the previous commit.
Files added here.
All unnecessary (old) files were also removed.
Merge from vendor-sys, r306017
- Use conditional instruction to simplify the ARMv6 vDSO. This means
that we no longer perform any branching. In the failure case, we
simply slide over the assignments of the return values.
The vDSO could be improved even further by using stmia to do
assignments in parallel. Unfortunately, the script used to generate
these is not smart enough for that (yet).
Spotted by: andrew@.
- Make the style of the i686 vDSO more similar to the others by using
decimal literals.
Bugs in the Python code used to generate this vDSO caused us to
miscompute the register numbers/stack offsets at which addresses of the
system call output arguments were stored.
Together with some other patches, this vDSO allows us to make all of the
cloudlibc unit tests pass.
Obtained from: https://github.com/NuxiNL/cloudabi
In order to make CloudABI work on ARMv6, start off by copying over the
sysvec for ARM64 and adjust it to use 32-bit registers. Also add code
for fetching arguments from the stack if needed, as there are fewer
register than on ARM64.
Also import the vDSO that is needed to invoke system calls. This vDSO
uses the intra procedure call register (ip) to store the system call
number. This is a bit simpler than what native FreeBSD does, as FreeBSD
uses r7, while preserving the original r7 into ip.
This sysvec seems to be complete enough to start CloudABI processes.
These processes are capable of linking in the vDSO and are therefore
capable of executing (most?) system calls successfully. Unfortunately,
the biggest show stopper is still that TLS is completely broken:
- The linker used by CloudABI, LLD, still has troubles with some of the
relocations needed for TLS. See LLVM bug 30218 for more details.
- Whereas FreeBSD uses the tpidruro register for TLS, for CloudABI I
want to make use of tpidrurw, so that userspace can modify the base
address directly. This is needed for efficient emulation.
Unfortunately, this register doesn't seem to be preserved across
context switches yet.
Obtained from: https://github.com/NuxiNL/cloudabi (the vDSO)
macro is defined in lots of different places in ipfilter, so replace all
of the nonportable definitions with portable ones.
Pointy hat to: dim
X-MFC-With: r304959, r304953
MFC after: 3 days
cnv API is a set of functions for managing name/value pairs by cookie.
The cookie can be obtained by nvlist_next(), nvlist_get_parent() or
nvlist_get_pararr() function. This patch also includes unit tests.
Submitted by: Adam Starak <starak.adam@gmail.com>
A nice thing about requiring a vDSO is that it makes it incredibly easy
to provide full support for running 32-bit processes on 64-bit systems.
Instead of letting the kernel be responsible for composing/decomposing
64-bit arguments across multiple registers/stack slots, all of this can
now be done in the vDSO. This means that there is no need to provide
duplicate copies of certain system calls, like the sys_lseek() and
freebsd32_lseek() we have for COMPAT_FREEBSD32.
This change imports a new vDSO from the CloudABI repository that has
automatically generated code in it that copies system call arguments
into a buffer, padding them to eight bytes and zero-extending any
pointers/size_t arguments. After returning from the kernel, it does the
inverse: extracting return values, in the process truncating
pointers/size_t values to 32 bits.
Obtained from: https://github.com/NuxiNL/cloudabi
The native CloudABI data types header file used to be pulled in by the
vDSOs when they were still written in C. Since they are now all
rewritten in assembly, this can go away.
Copy over amd64's cloudabi64_sysvec.c into i386 and tailor it to work.
Again, we use a system call convention similar to FreeBSD, except that
there is no support for indirect system calls (%eax == 0).
Where i386 differs from amd64 is that we have to store thread/process
entry arguments on the stack instead of using registers. We also have to
put an extra pointer on the stack for TLS (for GSBASE). Place that
pointer in the empty slot that is normally used to hold return
addresses. That seems to keep the code simple.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D7590
The reason why the old vDSOs were written in C using inline assembly was
purely because they were embedded in the C library directly as static
inline functions. This was practical during development, because it
meant you could invoke system calls without any library dependencies.
The vDSO was simply a copy of these functions.
Now that we require the use of the vDSO, there is no longer any need for
embedding them in C code directly. Rewriting them in assembly has the
advantage that they are closer to ideal (less useless branching, less
assumptions about registers remaining unclobbered by the kernel, etc).
They are also easier to build, as they no longer depend on the C type
information for CloudABI.
Obtained from: https://github.com/NuxiNL/cloudabi
Now that we've switched over to using the vDSO on CloudABI, it becomes a
lot easier for us to phase out old features. System call numbering is no
longer something that's part of the ABI. It's fully based on names. As
long as the numbering used by the kernel and the vDSO is consistent
(which it always is), it's all right.
Let's put this to the test by removing a system call (thread_tcb_set())
that's already unused for quite some time now, but was only left intact
to serve as a placeholder. Sync in the new system call table that uses
alphabetic sorting of system calls.
Obtained from: https://github.com/NuxiNL/cloudabi
Several files use the internal name of `struct device` instead of
`device_t` which is part of the public API. This patch changes all
`struct device *` to `device_t`.
The remaining occurrences of `struct device` are those referring to the
Linux or OpenBSD version of the structure, or the code is not built on
FreeBSD and it's unclear what to do.
Submitted by: Matthew Macy <mmacy@nextbsd.org> (previous version)
Approved by: emaste, jhibbits, sbruno
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7447
CloudABI executables that are emulated on Mac OS X do not invoke system
calls through "syscall". Instead, they make use of a vDSO that is
provided by the emulator that provides symbols for all of the system
call routines. The emulator can implement these any way it likes.
At some point in time we want to do this for native execution as well,
so that CloudABI executables are entirely oblivious of how system calls
need to be performed. They will simply call into functions and let that
deal with all of the details.
These source files can be used to generate a simple vDSO that does
nothing more than invoke "syscall". All we need to do now is map it into
the processes.
Obtained from: https://github.com/NuxiNL/cloudabi
f/w for the other devices supported by this driver.
Patch linked in https://reviews.freebsd.org/D6967 but not actually
a part of the review.
Obtained from DragonflyBSD.
Submitted by: Kevin Bowling <kev009@kev009.com>
MFC after: 2 weeks
Relnotes: yes
When we change nvl_array_next to NULL it means that we want to destroy or
take nvlist_array. The nvpair, which stores next nvlist of nvlist_array element
is no longer needed and can be freed.
Submitted by: Adam Starak <starak.adam@gmail.com>
MFC after: 1 week
* add support to read the timer and capability
* add support to enable/disable the location timer.
On AR9380 at least, enabling the location timer is required to make
the timer tick, otherwise location packets return a timestamp of 0.
However, it then makes /all/ RX packets use the RX location timestamp
instead of the TSF timestamp.
So, unless I find another magical way to do location timestamping,
we will have to dynamically switch things on/off and ensure the
TX/RX path handles the "different" timestamps correctly.
Tested:
* AR9380, STA mode
* LOC_INFO is mostly just "did this packet come with a locationing
timestamp instead of TSF";
* Decode not-sounding, uploaded-data, data-valid, data type and
number of extension spatial streams.
* If fast_ts is set then the TX timestamp is the fast timestamp, not
normal TSF.
* If the TX descriptor has the position bit set then request locationing
and clear sounding-disable. This way we (a) get the response with
the TX timestamp from the location side of things, and (b) we get
a CSI dump of the response ACK, which we will eventually use in the
locationing path.
* the code already stored the length of the RX desc, which I never used.
So, use that and retire the new flag I introduced a while ago.
* Introduce a TX timestamp length field and capability.
doing the teardown. ipf_destroy_all() may free ipfmain in case
of ipf_dynamic_softc being true, thus we are avoiding a possible
memory modified after free as well.
Reported by: Coverity
Coverity CID: 1357320
Approved by: re (hrs)
MFC after: 10 days
Split initializzation an teardown into module (global state) and VNET
(per virtual network stack) parts. Virtualise global state, which is
not "const".
Cleanup eventhandlers, so that we can make use of the passed in argument
to get the vnet state from the ifp; disable the "cloner" event as it is
too early, has no state, and can fire before initialisation (see comment
in the source).
Handle the dynamic sysctls specially. The problem is that "ipmain"
is the virtualized struct, but the fields used for the sysctls are
hanging off memory allocated and attached to the virtualized "ipmain"
thus standard VNET macros and sysctl handling do not work.
We still say it is VNET sysctls to get the proper protection checks
in the VIMAGE case; to solve the problem of accessing the right bit
of memory hanging of each per-VNET ipmain, we use a dedicated handler
function wrapping around sysctl_ipf_int() undoing the base calculation
from kern_sysctl.c and then adding the passed-in offset into the right
struct depending on handler. A bit of a mess exposing VNET-internals
this way but the only way to keep the code without having to massively
restructure ipf internals.
Approved by: re (hrs)
Sponsored by: The FreeBSD Foundation
Obtained from: projects/vnet
MFC after: 2 weeks
Reviewed by: cy
Differential Revision: https://reviews.freebsd.org/D7000
allocations from ipfilter in preparation for VNET support.
Suggested by: cy (see D7000)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.
Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.
Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.
For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.
Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.
For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).
Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.
Approved by: re (hrs)
Obtained from: projects/vnet
Reviewed by: gnn, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6747
Among other things, this introduces the idea of DBA-gated queues that
aren't the CABQ. The TDMA support requires this.
Tested:
* AR9580 (hostap mode)
* AR9380 (sta mode)
Approved by: re (gjb)
This is in preparation for some other TDMA fixes which will hopefully
end with having working TDMA.
But, it does avoid lots of read/modify/writes in the txq setup path.
* Allow readyTime to just be programmed in directly
* The beacon interval and all of the beacon timing sysctl's are in TU,
not TSF. So, we were doing the wrong math on the CAB programming
in the first place.
This seems to make 5G work better.
It doesn't fix powersave handling though, that still sees the PHY get
stuck during initial calibration and everything goes pear shaped.
I'll look into that later.
Tested:
* QCAFN222 NIC, STA mode, 5GHz
Obtained from: Linux ath9k
Turns out I wasn't even initialising or programming a lot of stuff
for the AR9462 2.1 chip. Oops.
This mostly gets it working. powersave scan results in some pretty
hilarious NFcal hangs and I don't see beacons reliably.
There are still some xlna gain tables missing that ath9k has; I'll
follow up with some fixes and then see if the QCAFN222 NIC I have
tests this path.
Tested:
* QCAFN222 NIC, STA mode, 2GHz and 5GHz
These are apparently conditional on there being a shared PA/LNA, which
at least on AR9462/QCA9535 devices I have isn't a thing.
I'm .. not yet sure which devices it /is/ a thing, so I'll come back
to that.
Tested:
* QCA9565 STA + bluetooth
Obtained from: Linux ath9k
* Add extra debugging - the weights debugging is really useful to ensure
things are programmed into the wlan coexistence table. The weights are
what traffic priority each of the various modes get (tx, tx-high-priority,
rx-beacon, etc) if they're all zero, things work very poorly.
* Add in coex init routines from ath9k for AR9462 and QCA9565 1ANT and 2ANT.
This control things like beacon stomping, ACK handling, antennas, PA/LNA
shared, etc.
* Some ancillary bits.
TODO:
* There's some conditional stuff around MCI_ANT_ARCH_PA_LNA_SHARED() in ath9k
which doesn't always enable force-on LNA. That'll have to be examined
and merged in as appropriate.
Obtained from: linux ath9k
Notably, this also sets AR_BTCOEX_WL_LNADIV to FORCE_ON, so LNA diversity
is always enabled and under control of the wifi chip.
Tested:
* QCA9565, STA + bluetooth mode
Obtained from: Linux ath9k
