Remove stale comment about socket buffer accounting from access(2) code.
It is the case, however, that the uidinfo of the temporary credential
set up for access(2) is not properly updated when its effective uid is
changed.
Approved by: re (bz)
When close() is called on a connected socket pair, SO_ISCONNECTED might be
set but be cleared before the call to sodisconnect(). In this case,
ENOTCONN is returned: suppress this error rather than returning it to
userspace so that close() doesn't report an error improperly.
PR: kern/144061
Reported by: Matt Reimer <mreimer at vpop.net>,
Nikolay Denev <ndenev at gmail.com>,
Mikolaj Golub <to.my.trociny at gmail.com>
Approved by: re (kib)
Correct definition of CIOC_KERNEL_VERSION Coda ioctl() for systems
where sizeof(int) != sizeof(sizeof(int)), or the ioctl will return
EINVAL.
Approved by: re (kib)
Fix a race between ngs_rcvmsg() and soclose() which closes the control
socket while it is still in use as ngs_rcvmsg() runs without any lock
held.
Sponsored by: Sandvine Incorporated
Approved by: re (bz)
Update device-labeling logic for Biba, LOMAC, and MLS to recognize new-style
pts devices when various policy ptys_equal flags are enabled.
Submitted by: Estella Mystagic <estella at mystagic.com>
Approved by: re (kib)
ifconfig(8) expects interface fooX to be supported by the module if_foo,
and will try to load it if it's not present. To better meet these
expectations, change the module name for the loopback interface from
'loop' to 'if_lo'. The loopback interface is always compiled into the
base kernel, so there are no resulting changes in kld files, etc.
Discussed with: brooks (ages ago)
Approved by: re (bz, kib)
sge_encap() can sometimes return an error with m_head set to NULL.
Make sure not to requeue freed mbuf in sge_start_locked(). This
should fix NULL pointer dereference panic.
Reported by: Nikolay Denev <ndenev <> gmail dot com>
Submitted by: jhb
Approved by: re (bz)
Only audit pathnames in namei(9) if copying the directory string completes
successfully. Continue to do this before the empty path check so that the
ENOENT returned in that case gets an empty string token in the BSM record.
Approved by: re (kib)
When warning about possible netisr configuration problems during boot,
report using "netisr_init" rather than "netisr2", which was the development
name for the project.
Approved by: re (kib)
the jail(8) command. [10:04]
Fix a one-NUL-byte buffer overflow in libopie. [10:05]
Correctly sanity-check a buffer length in nfs mount. [10:06]
Approved by: so (cperciva)
Approved by: re (kensmith)
Security: FreeBSD-SA-10:04.jail
Security: FreeBSD-SA-10:05.opie
Security: FreeBSD-SA-10:06.nfsclient
Fix the double counting of the last process thread td_incruntime
on exit, that is done once in thread_exit() and the second time in
proc_reap(), by clearing td_incruntime.
Approved by: re (kensmith)
Hook up some wires that were forgotten a few months ago and restore
the zombie device timeout code and the loop down time code and the fabric
hysteresis code.
Approved by: re (ken smith)
- Update the sparc64 hardware list regarding machines that will be supported
beginning with 8.1-RELEASE as well as correct some existing entries and
add previously missed ones. [1]
- According to simon@ when referring to a company along a product just to
identify the company one shouldn't use the company trademark. [2]
Approved by: re (kib), blackend [1], simon [2]
Add a new build option, MAN_UTILS. This option lets you control building
utilities and related support files for manual pages, which were previously
controlled by MAN. For POLA, the default depends on MAN, i.e., WITHOUT_MAN
implies WITHOUT_MAN_UTILS and WITH_MAN implies WITH_MAN_UTILS.
Note this patch implicitly fixes a documentation bug of src.conf(5), which
says WITHOUT_MAN may be used to not build manual pages while it was also
disabling some utilities for manual pages.
Approved by: re (kib)
Flush all routes before adding the default route in order to allow
sysinstall to cleanly re-initialize the network.
PR: bin/145553
Submitted by: gcooper
Approved by: cperciva (mentor)
Use the iflladdr_event event to keep the mac address on the vap in sync with
the parent wirless interface. If the user passed in a mac address or it was
autogenerated then flag this to avoid trashing it on update.
This will fix wlan+lagg in a post vap world.
Declare a new EVENTHANDLER called iflladdr_event which signals that the L2
address on an interface has changed. This lets stacked interfaces such as
vlan(4) detect that their lower interface has changed and adjust things in
order to keep working. Previously this situation broke at least vlan(4) and
lagg(4) configurations.
The EVENTHANDLER_INVOKE call was not placed within if_setlladdr() due to the
risk of a loop.
PR: kern/142927
Submitted by: Nikolay Denev
MFC r202611
Do not hold the lock over if_setlladdr() as it calls into the interface driver
init routine.
- fixes a bug that it didn't initialize the ratectl after association;
so ni_txrate returned 0 which is a invalid result.
- The fourth argument of ieee80211_ratectl_tx_complete() could be not
NULL.
Reported by: Gustau P?rez <gperez at entel.upc.edu>
Tested by: Gustau P?rez <gperez at entel.upc.edu>,
Ian FREISLICH <ianf at clue.co.za>
When configuring hwpmc to use the EXT_SNOOP event, only send a default
cachestate qualifier on the Atom processor. Other Intel processors do not
accept a cachestate qualifier and currently hwpmc will return EINVAL if you
try to use the EXT_SNOOP event on those processors
Approved by: emaste (mentor)
When configuring a system-wide couting PMC, hwpmc was incorrectly logging
process mappings for that PMC. Nothing ever reads pmc logs out of a
counting PMC, so the log buffers were leaked when the PMC was
deconfigured. The process mappings are only useful for sampling PMCs
anyway, so only log the mappings if the PMC is a sampling PMC.
This bug would cause allocating sample-mode PMCs to fail with ENOMEM
after allocating several counting-mode PMCs.
Approved by: emaste (mentor)
r208454,r208455,r208458:
r207920:
Back out r205134. It is not stable.
r207934:
Add missing new line characters to the warnings.
r207936:
Eventhough r203504 eliminates taste traffic provoked by vdev_geom.c,
ZFS still like to open all vdevs, close them and open them again,
which in turn provokes taste traffic anyway.
I don't know of any clean way to fix it, so do it the hard way - if we can't
open provider for writing just retry 5 times with 0.5 pauses. This should
elimitate accidental races caused by other classes tasting providers created on
top of our vdevs.
Reported by: James R. Van Artsdalen <james-freebsd-fs2@jrv.org>
Reported by: Yuri Pankov <yuri.pankov@gmail.com>
r207937:
I added vfs_lowvnodes event, but it was only used for a short while and now
it is totally unused. Remove it.
r207970:
When there is no memory or KVA, try to help by reclaiming some vnodes.
This helps with 'kmem_map too small' panics.
No objections from: kib
Tested by: Alexander V. Ribchansky <shurik@zk.informjust.ua>
r208142:
The whole point of having dedicated worker thread for each leaf VDEV was to
avoid calling zio_interrupt() from geom_up thread context. It turns out that
when provider is forcibly removed from the system and we kill worker thread
there can still be some ZIOs pending. To complete pending ZIOs when there is
no worker thread anymore we still have to call zio_interrupt() from geom_up
context. To avoid this race just remove use of worker threads altogether.
This should be more or less fine, because I also thought that zio_interrupt()
does more work, but it only makes small UMA allocation with M_WAITOK.
It also saves one context switch per I/O request.
PR: kern/145339
Reported by: Alex Bakhtin <Alex.Bakhtin@gmail.com>
r208147:
Add task structure to zio and use it instead of allocating one.
This eliminates the only place where we can sleep when calling zio_interrupt().
As a side-effect this can actually improve performance a little as we
allocate one less thing for every I/O.
Prodded by: kib
r208148:
Allow to configure UMA usage for ZIO data via loader and turn it on by
default for amd64. On i386 I saw performance degradation when UMA was used,
but for amd64 it should help.
r208166:
Fix userland build by making io_task available only for the kernel and by
providing taskq_dispatch_safe() macro.
r208454:
Remove ZIO_USE_UMA from arc.c as well.
r208455:
ZIO_USE_UMA is no longer used.
r208458:
Create UMA zones unconditionally.
