If the disk parameter "DEFAULT" is set in place of an actual device name,
or no disk is specified for the PARTITIONS parameter, the installer will
follow the logic used in the automatic-partitioning mode, in which it
will either provide a selection dialog for one of several disks if
several are present or automatically select it if there is only one. This
simplifies the creation of fully-automatic installation media for
hardware or VMs with varying disk names.
Suggested by: Egoitz Aurrekoetxea <egoitz@sarenet.es>
MFC after: 3 weeks
Relnotes: yes
Introduce struct netdev_notifier_info as a container to pass
net_device to the callback functions.
Adjust netdev_notifier_info_to_dev() to return the net_device field.
Add explicit casts from ifp to ni->dev even though currently
struct net_device is defined to struct ifnet. This is needed in
preparation for untangling this and improving the net_device compat
code.
Obtained-from: bz_iwlwifi
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky
Differential Revision: https://reviews.freebsd.org/D29365
Add a net_ratelimit() compat implementation based on ppsratecheck().
Add a sysctl to allow tuning of the number of messages.
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky
Differential Revision: https://reviews.freebsd.org/D29399
When debugging leaked MSI/MSI-X vectors through LinuxKPI I found
the informational printf unhelpful. Rather than just stating we
leaked also tell how many MSI or MSI-X vectors we leak.
Sponsored-by: The FreeBSD Foundation
Reviewed-by: jhb
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29394
net80211 changed a while back to support per-VAP config for things
rather than it being global. This is to support firmware NICs that
support per-VAP flags and configuration where the firmware will figure
out how to combine them.
However, it introduced a fun timing issue - those changes used to happen
to the shared ic state before newstate() was called, but now they're
also tasks and they can happen /after/.
This isn't a problem for ath(4), but it exposed some interesting
timing and config bugs here. Notably, I saw short slot NOT being
configured in 5GHz mode during some associations, so 5GHz stuff
would hang or behave poorly. Other times the follow-up auth has
the right config, so it didn't hang.
So for now, just flip this over to using the per-VAP flags which
are correct when newstate() is called. net80211 should also have
those flags synch'ed to the global ic state before newstate() runs
and that can come in a subsequent commit.
Whilst here also fix plcp to be consistently logged as a hex value.
Tested:
* iwn(4) Intel 6205, STA mode, both 2GHz and 5GHz
Differential Revision: https://reviews.freebsd.org/D29379
Reviewed by: bz
For filters which implement accf_create, the setsockopt(2) handler
caches the filter name in the socket, but it also incorrectly frees the
buffer containing the copy, leaving a dangling pointer. Note that no
accept filters provided in the base system are susceptible to this, as
they don't implement accf_create.
Reported by: Alexey Kulaev <alex.qart@gmail.com>
Discussed with: emaste
Security: kernel use-after-free
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The hw.cxgbe.kern_tls tunable was used for this in the past and if it
was set then all T6 adapters would be configured for NIC TLS operation
and could not be reconfigured for TOE without a reload. With this
change ifconfig can be used to manipulate toe and txtls caps like any
other caps. hw.cxgbe.kern_tls continues to work as usual but its
effects are not permanent any more.
* Enable nic_ktls_ofld in the default configuration file and use the
firmware instead of direct register manipulation to apply/rollback
NIC TLS configuration. This allows the driver to switch the hardware
between TOE and NIC TLS mode in a safe manner. Note that the
configuration is adapter-wide and not per-port.
* Remove the kern_tls config file as it works with 100G T6 cards only
and leads to firmware crashes with 25G cards. The configurations
included with the driver (with the exception of the FPGA configs) are
supposed to work with all adapters.
Reported by: Veeresh U.K. at Chelsio
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Reviewed by: jhb@
Differential Revision: https://reviews.freebsd.org/D29291
PowerISA 2.07B says that the low-order p-12 bits of the real page number
contained in ARPN and LP fields of a PTE must be 0s and are ignored
by the hardware (Book III-S, 5.7.7.1), where 2^p is the actual page size
in bytes, but we were clearing only the LP field.
This worked on bare metal and QEMU with KVM, that ignore these bits,
but caused a kernel panic on QEMU with TCG, that expects them to be
cleared.
This fixes running FreeBSD with HPT superpages enabled on QEMU
with TCG.
MFC after: 2 weeks
Sponsored by: Eldorado Research Institute (eldorado.org.br)
POWER architecture CPUs (Book-S) require natural alignment for
cache-inhibited storage accesses. Since we can't know the caching model
for a page ahead of time, always enforce natural alignment in bcopy.
This fixes a SIGBUS when calling the function with misaligned pointers
on POWER7.
Submitted by: Bruno Larsen <bruno.larsen@eldorado.org.br>
Reviewed by: luporl, bdragon (IRC)
MFC after: 1 week
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D28776
The computed IPOIB_CM_RX_SG is too small. It doesn't account for fallback
to mbuf clusters when jumbo frames are not available and it also doesn't
account for the packet header and trailer mbuf.
This causes a memory overwrite situation when IPOIB_CM is configured.
While at it add a kernel assert to ensure the mapping array is not overwritten.
PR: 254474
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
The error cases (goto fin) of _nsdispatch were missing the unlock.
This change also drops the checks for __isthreaded since the pthread stubs
are already no-ops if threads are not being used. Dropping those conditionals
allows clang's thread safety analysis to deal with the file and also makes
the code a bit more readable. While touching the file also add a few more
assertions in debug mode that the right locks are held.
Reviewed By: markj
Differential Revision: https://reviews.freebsd.org/D29372
dash does not allow function names containing a ":", so replace it with
a '_'. Additionally, Ubunutu 18.04 ships git 2.17 which does not support
the `--default false` flag for git config.
Reviewed By: markj
Differential Revision: https://reviews.freebsd.org/D29374
The man page says "The feenableexcept(), fedisableexcept(), and
fegetexcept() functions return a bitmap of the exceptions that were
unmasked prior to the call.", so we should return zero not -1.
Reviewed By: mhorne
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29386
This should bring the number of Jenkins failures from 4 down to 3.
Locally kyua now prints `skipped: could not find a valid interface [0.115s]`
when I run it in QEMU without a network device.
Reviewed By: lwhsu
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29414
Currently running `truss -a -e` does not decode any
argument values for freebsd32_* syscalls (open/readlink/etc.)
This change checks whether a syscall starts with freebsd{32,64}_ and if
so strips that prefix when looking up the syscall information. To ensure
that the truss logs include the real syscall name we create a copy of
the syscall information struct with the updated.
The other problem is that when reading string array values, truss
naively iterates over an array of char* and fetches the pointer value.
This will result in arguments not being loaded if the pointer is not
aligned to sizeof(void*), which can happens in the compat32 case. If it
happens to be aligned, we would end up printing every other value.
To fix this problem, this changes adds a pointer_size member to the
procabi struct and uses that to correctly read indirect arguments
as 64/32 bit addresses in the the compat32 case (and also compat64 on
CheriBSD).
The motivating use-case for this change is using truss for 64-bit
programs on a CHERI system, but most of the diff also applies to 32-bit
compat on a 64-bit system, so I'm upstreaming this instead of keeping it
as a local CheriBSD patch.
Output of `truss -aef ldd32 /usr/bin/ldd32` before:
39113: freebsd32_mmap(0x0,0x1000,0x3,0x1002,0xffffffff,0x0,0x0) = 543440896 (0x20644000)
39113: freebsd32_ioctl(0x1,0x402c7413,0xffffd2a0) = 0 (0x0)
/usr/bin/ldd32:
39113: write(1,"/usr/bin/ldd32:\n",16) = 16 (0x10)
39113: fork() = 39114 (0x98ca)
39114: <new process>
39114: freebsd32_execve(0xffffd97e,0xffffd680,0x20634000) EJUSTRETURN
39114: freebsd32_mmap(0x0,0x20000,0x3,0x1002,0xffffffff,0x0,0x0) = 541237248 (0x2042a000)
39114: freebsd32_mprotect(0x20427000,0x1000,0x1) = 0 (0x0)
39114: issetugid() = 0 (0x0)
39114: openat(AT_FDCWD,"/etc/libmap32.conf",O_RDONLY|O_CLOEXEC,00) ERR#2 'No such file or directory'
39114: openat(AT_FDCWD,"/var/run/ld-elf32.so.hints",O_RDONLY|O_CLOEXEC,00) = 3 (0x3)
39114: read(3,"Ehnt\^A\0\0\0\M^@\0\0\0#\0\0\0\0"...,128) = 128 (0x80)
39114: freebsd32_fstat(0x3,0xffffbd98) = 0 (0x0)
39114: freebsd32_pread(0x3,0x2042f000,0x23,0x80,0x0) = 35 (0x23)
39114: close(3) = 0 (0x0)
39114: openat(AT_FDCWD,"/usr/lib32/libc.so.7",O_RDONLY|O_CLOEXEC|O_VERIFY,00) = 3 (0x3)
39114: freebsd32_fstat(0x3,0xffffc7d0) = 0 (0x0)
39114: freebsd32_mmap(0x0,0x1000,0x1,0x40002,0x3,0x0,0x0) = 541368320 (0x2044a000)
After:
783: freebsd32_mmap(0x0,4096,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON|MAP_ALIGNED(12),-1,0x0) = 543543296 (0x2065d000)
783: freebsd32_ioctl(1,TIOCGETA,0xffffd7b0) = 0 (0x0)
/usr/bin/ldd32:
783: write(1,"/usr/bin/ldd32:\n",16) = 16 (0x10)
784: <new process>
783: fork() = 784 (0x310)
784: freebsd32_execve("/usr/bin/ldd32",[ "(null)" ],[ "LD_32_TRACE_LOADED_OBJECTS_PROGNAME=/usr/bin/ldd32", "LD_TRACE_LOADED_OBJECTS_PROGNAME=/usr/bin/ldd32", "LD_32_TRACE_LOADED_OBJECTS=yes", "LD_TRACE_LOADED_OBJECTS=yes", "USER=root", "LOGNAME=root", "HOME=/root", "SHELL=/bin/csh", "BLOCKSIZE=K", "MAIL=/var/mail/root", "MM_CHARSET=UTF-8", "LANG=C.UTF-8", "PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin", "TERM=vt100", "HOSTTYPE=FreeBSD", "VENDOR=amd", "OSTYPE=FreeBSD", "MACHTYPE=x86_64", "SHLVL=1", "PWD=/root", "GROUP=wheel", "HOST=freebsd-amd64", "EDITOR=vi", "PAGER=less" ]) EJUSTRETURN
784: freebsd32_mmap(0x0,135168,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 541212672 (0x20424000)
784: freebsd32_mprotect(0x20421000,4096,PROT_READ) = 0 (0x0)
784: issetugid() = 0 (0x0)
784: sigfastblock(0x1,0x204234fc) = 0 (0x0)
784: open("/etc/libmap32.conf",O_RDONLY|O_CLOEXEC,00) ERR#2 'No such file or directory'
784: open("/var/run/ld-elf32.so.hints",O_RDONLY|O_CLOEXEC,00) = 3 (0x3)
784: read(3,"Ehnt\^A\0\0\0\M^@\0\0\0\v\0\0\0"...,128) = 128 (0x80)
784: freebsd32_fstat(3,{ mode=-r--r--r-- ,inode=18680,size=32768,blksize=0 }) = 0 (0x0)
784: freebsd32_pread(3,"/usr/lib32\0",11,0x80) = 11 (0xb)
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D27625
This fixes a long-standing but very obscure bug in fsck_ffs when
it is run with the -R (rerun after unexpected errors). It only
occurs if fsck_ffs finds duplicate blocks and they are all contained
in inodes that reside in the first block of inodes (typically among
the first 128 inodes).
Rather than use the usual ginode() interface to walk through the
inodes in pass1, there is a special optimized `getnextinode()'
routine for walking through all the inodes. It has its own private
buffer for reading the inode blocks. If pass 1 finds duplicate
blocks it runs pass 1b to find all the inodes that contain these
duplicate blocks. Pass 1b also uses the `getnextinode()' to search
for the inodes with duplicate blocks. Pass 1b stops when all the
duplicate blocks have been found. If all the duplicate blocks are
found in the first block of inodes, then the getnextinode cache
holds this block of bad inodes. The subsequent cleanup of the inodes
in passes 2-5 is done using ginode() which uses the regular fsck_ffs
cache.
When fsck_ffs restarts, pass1() calls setinodebuf() to point at the
first block of inodes. When it calls getnextinode() to get inode
2, getnextino() sees that its private cache already has the first
set of inodes loaded and starts using them. They are of course the
trashed inodes left over from the previous run of pass1b().
The fix is to always invalidate the getnextinode cache when calling
setinodebuf().
Reported by: Chuck Silvers
Tested by: Chuck Silvers
MFC after: 3 days
Sponsored by: Netflix
In case with batch route delete via rib_walk_del(), when
some paths from the multipath route gets deleted, old
multipath group were not freed.
PR: 254496
Reported by: Zhenlei Huang <zlei.huang@gmail.com>
MFC after: 1 day
Pass 1b of fsck_ffs runs only when Pass 1 has found duplicate blocks.
When starting up, Pass 1b failed to properly skip over the two unused
inodes at the beginning of the filesystem resulting in the above error
message when it tried to read the filesystem root inode.
Reported by: Chuck Silvers
Tested by: Chuck Silvers
MFC after: 3 days
Sponsored by: Netflix
Similar to commit 3ead60236f ("Generalize bus_space(9) and atomic(9)
sanitizer interceptors"), use a more generic scheme for interposing
sanitizer implementations of routines like memcpy().
No functional change intended.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
upper_32_bits() and lower_32_bits() are defined twice in this file.
With the extra conditinal removed on LinuxKPI in 3b1ecc9fa1
they are also included from there already. Use the LinuxKPI version
and remove the two local ones.
Sponsored-by: The FreeBSD Foundation
Reviewed-by: hselasky
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29392
We are not aware of any out-of-tree consumers anymore
which would need KPI support for before Linux version 5.
Update the two in-tree consumers to use the new KPI.
This allows us to remove the extra version check and
will also give access to {lower,upper}_32_bits() unconditionally.
Sponsored-by: The FreeBSD Foundation
Reviewed-by: hselasky, rlibby, rstone
MFC-after: 2 weeks
X-MFC: to 13 only
Differential Revision: https://reviews.freebsd.org/D29391
Add stubs for struct lockdep_map and three accessor functions
used by iwlwifi.
Obtained-from: bz_iwlwifi
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky, emaste
Differential Revision: https://reviews.freebsd.org/D29398
brcm80211 include pci_ids.h directly while historically we were tracking
IDs in pci.h. Move the current set of IDs from pci.h to pci_ids.h and
while here add IDs for Realtek and Broadcom as well as a network class
as needed by their wireless drivers.
We still include pci_ids.h from pci.h so this should not change anything.
MFC-after: 2 weeks
Reviewed-by: hselasky
Differential Revision: https://reviews.freebsd.org/D29400
Add various protocol IDs found in various wireless drivers.
Also add ETH_FRAME_LEN and struct ethhdr.
Obtained-from: bz_iwlwifi
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky
Differential Revision: https://reviews.freebsd.org/D29397
Add ERFKILL and EBADE found in iwlwifi and brcmfmac wireless drivers.
While here add a comment above the block of error numbers above 500 to
document expectations.
Obtained-from: bz_iwlwifi
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky, emaste
Differential Revision: https://reviews.freebsd.org/D29396
The new PRELOAD_FDS variable accepts a list of file descriptors
that should be loaded into the process.
This may be used to optimize a loading process - in the case when
we already have a file descriptor to the library; we don't have
to look into multiple PATH to find it.
It may also be used in capability mode to load a single additional
library without the need to open a directory that contains it.
The last use of this functionality t may be a race-free method
of loading libraries.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D29334
Beauty correction for verbose mode or in case we print multiple key
information to not continue with the next options directly after
as we did so far, e.g.:
AES-CCM 2:128-bit
AES-CCM 3:128-bit powersavemode ...
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: adrian
Differential Revision: https://reviews.freebsd.org/D29393
In the notifier event callback function rather than casting directly
to the expected type use the proper accessor function as the mlx drivers
already do.
This is preparational work to allow us to improve the struct net_device
is struct ifnet compat code shortcut in the future.
Obtained-from: bz_iwlwifi
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: hselasky
Differential Revision: https://reviews.freebsd.org/D29364
ieee80211_node.h uses LIST_HEAD() which LinuxKPI redefines and this
can lead to problems (see comment there). Make sure the net80211
header file is handled correctly by adding it to the list of files
to include before re-defining the macro.
Also add header files needed as dependencies.
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: philip, hselasky
Differential Revision: https://reviews.freebsd.org/D29336
Both linux/random.h and net80211 have a function named
get_random_bytes(). With overlapping files included these collide.
Arguably the function could be renamed in linuxkpi but the generic
name should also not be used in net80211 so rename it there.
Sponsored-by: The FreeBSD Foundation
MFC-after: 2 weeks
Reviewed-by: philip, adrian
Differential Revision: https://reviews.freebsd.org/D29335
There are scenarios where an NFS client will mount an NFSv4 export
without specifying a callback address.
When running nfsdumpstate under this circumstance, the column output is
shifted incorrectly which places the "ClientID" value underneath the
"Clientaddr" column.
This diff is a small cosmetic change that prints a blank in the
"Clientaddr" column and ensures the data for the columns are aligned
appropriately.
Submitted by: Caleb St. John
Reviewed by: sef (previous version)
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D18958
