other timeouts could not happen while suspending, including timeouts
for things like msleep. This caused the system to hang on suspend
when the cbb was enabled, since its suspend path powered down the
socket which used a timeout to wait for it to be done.
APM now creates a thread when it is enabled, and deletes the thread
when it is disabled. This thread takes the place of the timeout by
doing its polling every ~.9s. When the thread is disabled, it will
wakeup early, otherwise it times out and polls the varius things the
old timeout polled (APM events, suspend delays, etc).
This makes my Sony VAIO 505TS suspend/resume correctly when APM is
enabled (ACPI is black listed on my 505TS).
This will likely fix other problems with the suspend path where
drivers would sleep with msleep and/or do other timeouts. Maybe
there's some special case code that would use DELAY while suspending
and msleep otherwise that can be revisited and removed.
This was also tested by glebius@, who pointed out that in the patch I
sent him, I'd forgotten apm_saver.c
MFC After: 3 weeks
We already check for write() failures and handle EPIPE.
Failure to handle SIGPIPE was resulting in rpc.lockd terminating.
PR: bin/97768
Reported by: Gea-Suan Lin <gslin at csie dot nctu dot edu dot tw>
MFC after: 1 day
sendfile(). This causes sendfile() to use the file descriptor
reference to the socket instead of bumping the socket reference
count, which avoids an additional refcount operation, as well as a
potential expensive socket refcount drop, which can lead to
contention on the accept mutex. This change also has the side
effect of further reducing the number of cases where an in-progress
I/O operation can occur on a socket after close, as using the file
descriptor refcount prevents the socket from closing while in use.
MFC after: 3 months
If B_NOCACHE is set the pages of vm backed buffers will be invalidated.
However clean buffers can be backed by dirty VM pages so invalidating them
can lead to data loss.
Add support for flush dirty page in the data invalidation function
of some network file systems.
This fixes data losses during vnode recycling (and other code paths
using invalbuf(*,V_SAVE,*,*)) for data written using an mmaped file.
Collaborative effort by: jhb@,mohans@,peter@,ps@,ups@
Reviewed by: tegge@
MFC after: 7 days
stopped before adjusting their priority and setting them on the run
q so they cannot race for resources (pointed out by njl).
While here add a console printf on thread create fails; otherwise
noone may notice (e.g. return value is always 0 and caller has no
way to verify).
Reviewed by: jhb, scottl
MFC after: 2 weeks
client into the kernel by default, and many users won't use NFS,
don't start an extra 4 kernel threads that are unused. Once NFS
becomes active, it will start nfsiod's as it needs them.
We might consider mandating a minimum iod's equal to the number of
active NFS mounts (truncated to some value), which would force some
to remain available without having to create a new one if the file
system is mostly inactive.
PR: 70880
MFC after: 2 weeks
Prodded by: cel
Head nod: peter
Pointed out by: Joe <fbsd_user at a1poweruser dot com>
was done, I believe, to work around some cards having issues in the
suspend case. I think that this helped my Sony VAIO TS505 work better
when it had certain wireless cards in it and I did a apm -z. I've not
tested suspend/resume on other laptops in a long time, so I hope this
doesn't cause greif. Please let me know if it does.
of cases where we didn't take out the lock before setting or clearing
a bit. This apparently can lead to a race at kldunload time (at least
on my Turion64 laptop, never saw it on my Sony Vaio).
Adam Radford as follows:
twe aradford@amcc.com Pre-commit review requested
twa aradford@amcc.com Pre-commit review requested
With hat: core-secretary
Requested by: vkashyap
This version of scsi_target.c removes all SMP locking until
we have a lock-aware CAM stack. This allows us to use KNOTE
without a panic at least.
It's not yet clear whether target mode is working yet or not.
Discussed with: Scott, Ken, Nate, Justin
return to user space w/o waiting for I/O to complete.
I tried to get several folks who know this code better than me to review it
with no luck. I *do* know that w/o this code, using the SCSI target driver
panics in userret (if it doesn't panic in knote first).
if a process's uid or gid has changed, but the /proc/<PID> directory
itself was also set to mode 0. Assuming this doesn't open any
security holes, open access to the /proc/<PID> directory for users
other than root to read or search the directory.
Reviewed by: des (back in February)
MFC after: 3 weeks
Since tags are kept while packet resides in kernelspace, it's possible to
use other kernel facilities (like netgraph nodes) for altering those tags.
Submitted by: Andrey Elsukov <bu7cher at yandex dot ru>
Submitted by: Vadim Goncharov <vadimnuclight at tpu dot ru>
Approved by: glebius (mentor)
Idea from: OpenBSD PF
MFC after: 1 month
SRC_BASE package (src/[A-Z]*) as well as SRC_SYS (src/sys/*). This
allows users who only install the kernel source code to use the
modern "make buildkernel" approach.
Discussed with: re (scottl, kensmith)
MFC after: 3 days
EHCI spec for linking in new qTDs into an asynchronous QH. This
requires that there is a qTD marked as not active and not halted
at the start of the QH's list, and the hardware will know to re-fetch
the qTD on each pass rather than just looking at the overlay qTD:
"The host controller must be able to advance the queue from the
Fetch QH state in order to avoid all hardware/software race
conditions. This simple mechanism allows software to simply link
qTDs to the queue head and activate them, then the host controller
will always find them if/when they are reachable."
This is achieved by keeping an "inactivesqtd" entry on the QH list,
and re-using it each time as the start of the next transfer, and
allocating a new qTD to become the next inactivesqtd. Then a new
transfer can be activated by just setting its "active" flag, which
avoids all the previous messing with overlay qTD state in
ehci_set_qh_qtd().
more appropriate value and is also the default set by the kernel. I
could not find a justification of why rc.conf began overriding it back
in 1998.
This dramatically cuts NFS traffic on e.g. a busy system with NFS root.
Reviewed by: mohans
MFC After: 2 weeks
mimicing the NFS reference implementation.
NFS over TCP does not need fast retransmit timeouts, since network loss
and congestion are managed by the transport (TCP), unlike with NFS over
UDP. A long timeout prevents the unnecessary retransmission of non-
idempotent NFS requests.
Reviewed by: mohans, silby, rees?
Sponsored by: Network Appliance, Incorporated
the estimator to be more easily tuned and maintained.
There should be no functional change except there is now a lower limit
on the retransmit timeout to prevent the client from retransmitting
faster than the server's disks can fill requests, and an upper limit
to prevent the estimator from taking to long to retransmit during a
server outage.
Reviewed by: mohan, kris, silby
Sponsored by: Network Appliance, Incorporated
