o Properly use rman(9) to manage resources. This eliminates the
need to puc-specific hacks to rman. It also allows devinfo(8)
to be used to find out the specific assignment of resources to
serial/parallel ports.
o Compress the PCI device "database" by optimizing for the common
case and to use a procedural interface to handle the exceptions.
The procedural interface also generalizes the need to setup the
hardware (program chipsets, program clock frequencies).
o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by
default and non-serdev devices are handled by the bus.
o Use the serdev I/F to collect interrupt status and to handle
interrupts across ports in priority order.
o Sync the PCI device configuration to include devices found in
NetBSD and not yet merged to FreeBSD.
o Add support for Quatech 2, 4 and 8 port UARTs.
o Add support for a couple dozen Timedia serial cards as found
in Linux.
OS dependent layer. Thus, the watchdog timer can go off when the tx
engine is working fine but the OS dependent layer just hasn't been called
to cleanup finished tx transactions. To workaround this, when the watchdog
fires, poke the binary blob to force it to flush any pending tx
completions. If this drops the pending tx count to zero then just return
without logging a message or resetting the chip.
This reportedly fixes the 'device timeout()' errors with at least several
NF4 nve(4) parts.
Submitted by: Nathan Alexander Whitehorn <nathanw@uchicago.edu> (code)
Submitted by: dg (inspiration for comment and explanation)
MFC after: 1 week
stations that are associated by making ieee80211_find_txnode return
NULL when a unicast frame is to be delivered to an unassociated
station. This will be handled differently in the future but for
now putting the check here allows all drivers to immediately do
the right thing.
Reviewed by: avatar
MFC after: 1 week
Remove the code to dyanmically change the pv_entry limits. Go back
to a single fixed kva reservation for pv entries, like was done
before when using the uma zone. Go back to never freeing pages
back to the free pool after they are no longer used, just like
before.
This stops the lock order reversal due to aquiring the kernel map
lock while pmap was locked.
This fixes the recursive panic if invariants are enabled.
The problem was that allocating/freeing kva causes vm_map_entry
nodes to be allocated/freed. That can recurse back into pmap as
new pages are hooked up to kvm and hence all the problem.
Allocating/freeing kva indirectly allocate/frees memory.
So, by going back to a single fixed size kva block and an index,
we avoid the recursion panics and the LOR.
The problem is that now with a linear block of kva, we have no
mechanism to track holes once pages are freed. UMA has the same
problem when using custom object for a zone and a fixed reservation
of kva. Simple solutions like having a bitmap would work, but would
be very inefficient when there are hundreds of thousands of bits
in the map. A first-free pointer is similarly flawed because pages
can be freed at random and the first-free pointer would be rewinding
huge amounts. If we could allocate memory for tree strucures or
an external freelist, that would work. Except we cannot allocate/free
memory here because we cannot allocate/free address space to use
it in. Anyway, my change here reverts back to the UMA behavior of
not freeing pages for now, thereby avoiding holes in the map.
ups@ had a truely evil idea that I'll investigate. It should allow
freeing unused pages again by giving us a no-cost way to track the
holes in the kva block. But in the meantime, this should get people
booting with witness and/or invariants again.
Footnote: amd64 doesn't have this problem because of the direct map
access method. I'd done all my witness/invariants testing there. I'd
never considered that the harmless-looking kmem_alloc/kmem_free calls
would cause such a problem and it didn't show up on the boot test.
- Prevent possible live-lock in case of memory problems by freeing
already completed requests first.
Reported and tested by: markus, Bradley W. Dutton <brad-fbsd-stable@duttonbros.com>
MFC after: 1 day
- Comment possible event miss, which isn't critical, but probably can be
fixed by replacing the event lock usage with the queue lock.
MFC after: 2 weeks
pages existed only for the dynamic sysctl interfaces. There's probably
more complete and accurate content, better advice, etc, that could be added
here.
Per scottl's suggest, add a small piece of moralizing text regarding the
fact that sysctl names quickly get embedded in system configuration files,
libraries, third party applications, and even books, so renaming and
removing names after they've been published is a tricky issue.
MFC after: 1 month
POSTWRITE to POSTREAD.
No guarantee that all busdma is usage is perfect, but this change (in
addition to scott's last two commits) makes if_bfe work with > 1GB of
memory in my laptop.
OpenBSD changes. With these changes, PHY part of the driver becomes
functional (it senses media changes and negotiates speed just fine),
previously it just hang with no PHY message, but no data goes through
interface (error message is "can not stop transfer of Tx/Rx descriptor).
Hopefully somebody with more clue/free time will be able to pick up
after me.
buffers to go on the buf daemon's DIRTYGIANT queue.
- Set BO_NEEDSGIANT on ffs's devvp since the ffs_copyonwrite handler
runs in the context of the buf daemon and may require Giant.
than trying to optimize it into a single lock. This adds more calls to
lock giant with non smpsafe filesystems but is the only way to reliably
hold the correct lock.
- Remove an invalid assert in the mountedhere case in lookup and fix the
code to properly deal with the scenario. We can actually have a lookup
that returns dp == dvp with mountedhere set with certain unmount races.
Tested by: kris
Reported by: kris/mohans
Changelog towards if_iwi.c 1.26 (some changes have been committed separately
in the mean time):
- add led support
- add firmware loading on demand
- auto-restart firmware when it crashes
- serialize operations sent to the firmware to reduce firmware crashes
- add power save operation support
- remove incorrect specification of tx power control capability
- add radio on/off switch support
- improve net80211 state machine operation
- recognize and handle beacon miss
- handle authentication and association failures better
- add shared key authentication
- fix ibss mode (many changes)
- fix wme (many changes)
- correct radiotap support (many changes)
- correct bus dma setup of s/g
- correct various locking issues
- fix monitor mode
- fix scanning (many changes)
- recover from wedged scan requests
- respect active channel list
- eliminate cases where interface was marked down on error
- don't treat parity errors as fatal
- reclaim mgt frames immediately from tx queue
- correct interrupt handling, ack early (from NetBSD)
- fix short/long preamble handling
Committed with RELENG_6 compat #if's, should compile in RELENG_6. Requires
net/iwi-firmware-kmod to function.
Much work done by: sam
Tested by: many (freebsd-net), ume, luigi
MFC after: 4 weeks
entry (PTE) have the same meaning. The exception to this rule is the
eighth bit (0x080). It is the PS bit in a PDE and the PAT bit in a
PTE. This change avoids the possibility that pmap_enter() confuses a
PAT bit with a PS bit, avoiding a panic().
Eliminate a diagnostic printf() from the i386 pmap_enter() that serves
no current purpose, i.e., I've seen no bug reports in the last two
years that are helped by this printf().
Reviewed by: jhb
This driver was generously developed and donated by Highpoint.
It is enabled for i386 only at the moment. I will enable it for amd64
shortly.
Obtained from: HighPoint Technologies, Inc.
- MPSAFE. No more recursive lock required.
- bus_dma(9) conversion. I think it should work on all architectures.
- optimized Rx handler for each normal and jumbo frames. Previously
sk(4) used jumbo frame management code to handle normal sized
frames. As the handler needs an additional lock to protect jumbo
frame management structure from races, it used two lock operations
for each received packet. Now sk(4) uses single lock operation for
normal frame.(Jumbo frame still needs two lock operations as before.)
The hardware supports DMA scatter operations for Rx descriptors such
that it's possible to take advantagee of m_cljget(9) for jumbo frames.
However, due to a unknown reasons it resulted in poor performance on
sparc64. So I dropped m_cljget(9) approach. This should be revisited
since it would reduce one lock operation for jumbo frame handling.
- Tx TCP/Rx IP checksum offload support. According to the data sheet
of SK-NET GENESIS the hardware supports Rx IP/TCP/UDP offload.
But I couldn't make it work on my Yukon hardware. So Rx TCP/UDP was
disabled at the moment. It seems that newer Yukon chips can support
Tx UDP checksum offload too. But I need more documentation first.
- Added more wait time in reading VPD data. It seems that ASUS LOM
takes a very long time to respond VPD read signal.
- Added an additional lock for MII register access callbacks.
- Added more strict received packet validation routine. Previously it
passed corrupted packets to upper layers under certain conditions.
- A new function sk_yukon_tick() to handle auto-negotiation properly.
- Interrupt handler now checks shared interrupt source and protects
the interrupt handler from NULL pointer dereference which was caused
by odd status word value. The status word can returns 0xffffffff if
cable is unplugged while Rx/Tx/auto-negotiation is in progress.
- suspend/resume support(not tested).
- Added Rx/Tx FIFO flush routine for Yukon
- Activate Tx descriptor poll timer in order to protect possible loss
of SK_TXBMU_TX_START command. Previously the driver continuously issued
SK_TXBMU_TX_START when it notices pending Tx descriptors not processed
yet in interrupt handler. That approach would add additional PCI
write access overhead under high Tx load situations and it might fail
if the first SK_TXBMU_TX_START was lost and no interrupt is generated
from the first SK_TXBMU_TX_START command.
- s/printf/if_printf/, s/printf/device_printf/, Axe sk_unit in softc.
- Setting multicast/station address is now safe on strict-alignment
architectures.
- Fix long standing bug in VLAN header length setup.
- Added/corrected register definitions for Yukon.
(Register information from Linux skge driver.)
- Added Rx status definition for Marvell Yukon/XaQti XMAC.
(Rx status register information from Linux skge driver.)
- Update if_oerrors if we encounter watchdog error.
- callout(9) conversion
Special thanks to jkim who let me know RX status differences between
Yukon and XaQti XMAC.
It seems that there is still occasional watchdog timeout error but I
couldn't reproduce it and need more information to analyze it from
users.
Tested by: bz(amd64), me(i386, sparc64), current ML
Frank Behrens frank ! pinky ( sax $ de
