bsd.prog.mk -- we need to compile PIC, which requires a library build.
With this change, USDT (userspace DTrace probes) work from within
shared libraries.
PR: kern/159046
Submitted by: Alex Samorukov <samm at os2.kiev.ua>
Comments by: Scott Lystig Fritchie <slfritchie at snookles.com>
MFC after: 3 days
The zfs(8) and zpool(8) manual pages now match the state of the ZFS module
and have been customized for FreeBSD.
The new texts of the "Deduplication" subsection in zfs(8), the zpool "split"
command, the zfs "dedup" property and several other missing parts have been
added from illumos or OpenSolaris snv_134 (CDDL-licensed).
The mdoc(7) reimplementation of whole manual pages, the descriptions of the
zpool "readonly" property, "zfs diff" command and descriptions of several
other missing command flags and/or options were authored by myself.
MFC after: 1 week
Manual pages from OpenSolaris svn_134 are still properly CDDL licensed
but I have been informed that the parts from s11ex are uncertain even
if they contain a CDDL header.
Improved alignment for a maximum width of 80 characters.
Mark unsupported parts as such.
Reported to vendor: Illumos issue #1801
References:
https://www.illumos.org/issues/1801
Obtained from: OpenSolaris CDDL manual pages (snv_134, s11express) [1]
MFC after: 4 days
- synchronized to match new vendor code [1]
- removed ATTRIBUTES sections
- updated SEE ALSO sections
- properly updated copyright information (required by CDDL)
- remove empty lines via MANFILTER
Obtained from: Illumos [1]
MFC after: 5 days
- synchronized to match new vendor code (Illumos rev. 13513) [1]
- removed references to sun commands (replaced with FreeBSD commands)
- removed ATTRIBUTES sections
- updated SEE ALSO sections
- properly updated copyright information (required by CDDL)
- remove empty lines via MANFILTER
zfs(8) only:
- replaced "Zones" section with new "Jails" section
- removed misleading "ZFS Volumes as Swap or Dump Devices" section
- updated shareiscsi and sharesmb option information (not supported on FreeBSD)
- replace zoned property with jailed property
zpool(8) only:
- updated device names in examples
Obtained from: Illumos (as of rev. 13513:f84d4672fdbd) [1]
MFC after: 1 week
952 separate intent logs should be obvious in 'zpool iostat' output
1337 `zpool status -D' should tell if there are no DDT entries
References:
https://www.illumos.org/issues/952https://www.illumos.org/issues/1337
Obtained from: Illumos (issues 952, 1337; changesets 13384, 13432)
MFC after: 1 week
are linked with libraries they don't use:
- zinject doesn't use libavl
- ztest doesn't use libz
- zdb uses neither libavl nor libz
- zfs uses neither libbsdxml nor libm, nor libsbuf
- zpool uses neither libbsdxml nor libm, nor libsbuf
In addition, libzfs needs libm because it uses pow(), however it isn't
linked with -lm. This went unnoticed because all its users had -lm before.
Reviewed by: pjd, mm
Approved by: kib (mentor)
MFC after: 1 week
non-legacy mountpoints. It is better to be able to rename such file systems and
let them be mounted in old places until next reboot than using live CD, etc. to
rename with remount.
This is implemented by adding -u option to 'zfs rename'. If file system's
mountpoint property is set to 'legacy' or 'none', there is no need to specify -u.
Update zfs(8) manual page to reflect this addition.
MFC after: 2 weeks
It is possible for file systems with 'mountpoint' preperty set to 'legacy'
or 'none' - we don't have to change mount directory for them.
Currently such file systems are unmounted on rename and not even mounted back.
This introduces layering violation, as we need to update 'f_mntfromname'
field in statfs structure related to mountpoint (for the dataset we are
renaming and all its children).
In my opinion it is worth it, as it allow to update FreeBSD in even cleaner
way - in ZFS-only configuration root file system is ZFS file system with
'mountpoint' property set to 'legacy'. If root dataset is named system/rootfs,
we can snapshot it (system/rootfs@upgrade), clone it (system/oldrootfs),
update FreeBSD and if it doesn't boot we can boot back from system/oldrootfs
and rename it back to system/rootfs while it is mounted as /. Before it was
not possible, because unmounting / was not possible.
MFC after: 2 weeks
or mountpoint=legacy that have children datasets. This also fixes dataset
rename when receiving incremental snapshots as reported on freebsd-fs@
This assertion was made triggerable by opensolaris change #10196.
PR: bin/160400
Reviewed by: pjd
MFC after: 1 week
in the case of a held dataset during remount.
Detailed description is available at:
https://www.illumos.org/issues/883
illumos-gate revision: 13380:161b964a0e10
Reviewed by: pjd
Approved by: re (kib)
Obtained from: Illumos (Bug #883)
MFC after: 3 days
devices are imbalanced zfs will lots of CPU searching for space on devices
which tend to be pretty full. It should instead fail quickly on the full
devices and move onto devices which have more availability.
New loader tunable: vfs.zfs.mg_alloc_failures (min = 8)
Illumos-gate changeset: 13379:4df42cc92254
Obtained from: Illumos (Bug #1051)
MFC after: 2 weeks
cddl/contrib/opensolaris/cmd/zpool/zpool.8:
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_import.c:
Add the "zpool labelclear" command. This command can be
used to wipe the label data from a drive that is not
active in a pool. The optional "-f" argument can be
used to treat an exported or foreign vdev as "inactive"
thus allowing its label information to be cleared.
perform pool actions is always displayed.
cddl/contrib/opensolaris/cmd/zpool/zpool_main.c:
The "zpool status" command reports the "last seen at"
device node path when the vdev name is being reported
by GUID. Augment this code to assume a GUID is reported
when a device goes missing after initial boot in addition
to the previous behavior of doing this for devices that
aren't seen at boot.
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_pool.c:
In zpool_vdev_name(), report recently missing devices
by GUID. There is no guarantee they will return at
their previous location.
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_pool.c:
o Add zpool_pool_state_to_name() API to libzfs which converts a
pool_state_t into a user consumable string.
o While here, correct constness of make zpool_state_to_name()
and zpool_label_disk().
MFD after: 1 week
For snapshots, this is the same as COMPRESSRATIO, but for
filesystems/volumes, the COMPRESSRATIO is based on the data "USED" (ie,
includes blocks in children, but not blocks shared with the origin).
This is needed to figure out how much space a filesystem would use if it
were not compressed (ignoring snapshots).
Illumos-gate revision: 13387
Obtained from: Illumos (Feature #1092)
MFC after: 2 weeks
but just have a comment that this is broken.
This is just a bandaid until somebody can fix this correctly. The code
is just a broken as it was before r223262 - now buildworld just doesn't
fail.
Tested by: i386 + amd64 buildworld
With hat: benl co-mentor
OpenSolaris and ZFS header files. These changes are sufficient
to allow a C++ program to use the libzfs library.
Note: The majority of these files already included 'extern "C"'
declarations, so the intention of providing C++ compatibility
already existed even if it wasn't provided.
cddl/compat/opensolaris/include/assert.h:
Wrap our compatibility assert implementation in
'extern "C"'. Since this is a compatibility header
I matched the Solaris style of doing this explicitly
rather than rely on FreeBSD's __BEGIN/END_DECLS macro.
sys/cddl/compat/opensolaris/sys/kstat.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/arc.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/dsl_pool.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/ddt.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/spa.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zio.h:
Rename parameters in function declarations that conflict
with C++ keywords. This was the solution preferred by
members of the Illumos community.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zfs_ioctl.h:
In C, nested structures are visible in the global namespace,
but in C++, they take on the namespace of the structure in
which they are contained. Flatten nested structure
definitions within struct zfs_cmd so these structures are
visible in the global namespace when compiled in both
languages.
Sponsored by: Spectra Logic Corporation
Few new things available from now on:
- Data deduplication.
- Triple parity RAIDZ (RAIDZ3).
- zfs diff.
- zpool split.
- Snapshot holds.
- zpool import -F. Allows to rewind corrupted pool to earlier
transaction group.
- Possibility to import pool in read-only mode.
MFC after: 1 month
have an executable stack, due to linking in hand-assembled .S or .s
files, that have no .GNU-stack sections:
RWX --- --- /lib/libcrypto.so.6
RWX --- --- /lib/libmd.so.5
RWX --- --- /lib/libz.so.6
RWX --- --- /lib/libzpool.so.2
RWX --- --- /usr/lib/liblzma.so.5
These were found using scanelf, from the sysutils/pax-utils port.
Reviewed by: kib
if creating a mirror by attaching a new vdev to a root pool.
Reported by: James R. Van Artsdalen (on freebsd-fs@freebsd.org)
Approved by: delphij (mentor)
MFC after: 3 days
Retry IO once with ZIO_FLAG_TRYHARD before declaring a pool faulted
OpenSolaris revision and Bug IDs:
9725:0bf7402e8022
6843014 ZFS B_FAILFAST handling is broken
Approved by: delphij (mentor)
Obtained from: OpenSolaris (Bug ID 6843014)
MFC after: 3 weeks
OpenSolaris revision and Bug IDs:
9701:cc5b64682e64
6803605 should be able to offline log devices
6726045 vdev_deflate_ratio is not set when offlining a log device
6599442 zpool import has faults in the display
Approved by: delphij (mentor)
Obtained from: OpenSolaris (Bug ID 6803605, 6726045, 6599442)
MFC after: 3 weeks
linking process. This is needed because we change the source object
files and the second this dtrace -G is run, no probes will be found.
This hack allows us to build postgres with DTrace probes enabled. I'll
try to find a way to fix this without needing this hack.
Sponsored by: The FreeBSD Foundation
cannot access dataset system/usr/home: Operation not supported
by including libzfs_impl.h. What libzfs_impl.h does is to redefine ioctl() to
be compatible with OpenSolaris. More specifically OpenSolaris returns ENOMEM
when buffer is too small and sets field zc_nvlist_dst_size to the size that
will be big enough for the data. In FreeBSD case ioctl() doesn't copy data
structure back in case of a failure. We work-around it in kernel and libzfs by
returning 0 from ioctl() and always checking if zc_nvlist_dst_size hasn't
changed. For this work-around to work in pyzfs we need this compatible ioctl()
which is implemented in libzfs_impl.h.
MFC after: 2 weeks
This provides a noticeable write speedup, especially on pools with
less than 30% of free space.
Detailed information (OpenSolaris onnv changesets and Bug IDs):
11146:7e58f40bcb1c
6826241 Sync write IOPS drops dramatically during TXG sync
6869229 zfs should switch to shiny new metaslabs more frequently
11728:59fdb3b856f6
6918420 zdb -m has issues printing metaslab statistics
12047:7c1fcc8419ca
6917066 zfs block picking can be improved
Approved by: delphij (mentor)
Obtained from: OpenSolaris (Bug ID 6826241, 6869229, 6918420, 6917066)
MFC after: 2 weeks
drti.o depends on libelf and this avoids linking every other drti.o
program (namely programs with USDT probes) with libelf.
Sponsored by: The FreeBSD Foundation
Summary of changes:
* Implement a compatibility shim between Solaris libproc and our
libproc and remove several ifdefs because of this.
* Port the drti to FreeBSD.
* Implement the missing DOODAD sections
* Link with libproc and librtld_db
* Support for ustack, jstack and uregs (by sson@)
* Misc bugfixing
When writing the SUWN_dof section, we had to resort to building the ELF
file layout by "hand". This is the job of libelf, but our libelf doesn't
support this yet. When libelf is fixed, we can remove the code under
#ifdef BROKEN_LIBELF.
Sponsored by: The FreeBSD Foundation
Unlike for modules with dso type, in elf object modules all the sections
have virtual address of zero. So, it is insufficient to add module base
address to section virtual address (as recorded in section header) to
get section address in kernel memory.
Instead, we should apply the same calculations that are performed by
kernel loaders (in boot code and in kernel) when they lay out sections
in memory.
Also, unlike OpenSolaris, the sections are not collapsed into just .text,
.data and .bss by module loaders, so we need to take additional care
about other sections.
Note that in-kernel symbol-to-address mapping worked just fine, e.g. fbt
provider could correctly find the functions, etc. It's only in userland
that the mapping in both direction worked incorrectly, e.g. in stack()
output addresses of functions in kernel modules were not translated to
their names.
Reviewed by: rpaulo
MFC after: 3 weeks
- fixes panics when Solaris/OpenSolaris pools that contain files
uploaded with the SMB protocol are accessed
Enable seting/unsetting the sharesmb property (dummy action)
- allows users who import pools from Solaris/Opensolaris to unset
the sharesmb property and get rid of annoying messages
PR: kern/145778, kern/148709
Approved by: pjd, delphij (mentor)
MFC after: 7 weeks
Initialize rw_count properly so that zdb(8) doesn't trigger assertion in
rw_enter():
ASSERT(rwlp->rw_count == 0);
While here, assert that rw_count is 0 when destroying the lock.
MFC after: 1 week
