possible method to prevent panicing in interrupt handler
after re_shutdown(), sometimes seen on SMP systems.
This would work here only because re_detach() clears
IFF_UP (to prevent another race) and it was demonstrated
that it's not enough to call vr_detach() in vr_shutdown()
to prevent a panic.
- Fixed if_free() logic screw-up that can either result
in freeing a NULL pointer or leaking "struct ifnet".
- Move if_free() after re_stop(); the latter accesses
"struct ifnet". This bug was masked by a previous bug.
- Restore the fix for a panic on detach caused by racing
with BPF detach code by Bill by moving ether_ifdetach()
after re_stop() and resetting IFF_UP; this got screwed
up in revs. 1.30 and 1.36.
attempts to deallocate busdma tags and resources that haven't been
allocated yet, causing a panic every time a dc interface fails to
attach. Fix by checking that we really have something to dealloc
before calling bus_dma*() functions.
Approved by: jhb
MFC after: 1 week
that with the NIC set of registers rather than the ASIC registers. I
believe this was a harmless oversight, since we set ED_P0_CR to the
same value 5ms later, but just to be safe...
risky because the "current time" is supposed to be fed to the card during
initialization, and the current time is supposed to be put into each command
that is sent to the card. Hopefully either the card doesn't actually care
about the timestamps, or it doesn't care about the absolute values so long
and the relative values are consistent. Not an MFC candidate until more
thorough testing can be done.
While I'm here add KASSERT(9) to notify failure of SYSUNINIT handler.
Reported by: Ben Kaduk < minimarmot AT gmail DOT com >
Tested by: Ben Kaduk < minimarmot AT gmail DOT com >
o Attach AX88x90's MII bus to system, and require its presence.
o Reorg the mii code a little, and move more of it into pccard attachment.
o Eliminate ed_pccard_{read,write}_attrmem in favor of a more appropriate
function in the pccard layer.
o Update comments to reflect knowledge gained.
o Update how re recognize a NE-2000 ROM. I found a couple of different
datasheets that define the structure of the PROM data, so the code's
old heuristics have been removed, and comments updated to reflect the
structure.
o Eliminate work around for EC2T. It is no longer needed, and was wrong
headed since the EC2T has a Winbound 82C926C in it, not a AX88x90.
o Add copyright to if_ed_pccard.c, since I believe I've re-written more than
3/4 of it.
# With these changes, all of my 20-odd ed based cards work, except for the
# NetGear FA-410, and I'm pretty sure that's a MII/PHY problem.
attach to. These cards are combo cards (in that they have a modem
inside of them), but not true MFC cards. Full support of these cards
will have to wait until we can pick the config to use and for the PFC
support that I have brewing.
- Remove an assertion in sound.c, it's not needed (and causes a panic now).
From the conversation via mail between glebius and Ariff:
---snip---
> Well, but which mutex protects now? Do we own anything else
> in pcm_chnalloc()? I see some queue(4) macros in pcm_chnalloc(),
> they should be protected, shouldn't they?
Queue insertion/removal occur during
1) driver loading (which is pretty much single thread /
sequential) or unloading (mutex protected, bail out if there is
any channel with refcount > 0 or busy).
2) vchan_create()/destroy(), (which is *sigh* quite complicated), but
somehow protected by 'master'/parent channel mutex. Other
thread cannot add/remove vchan (or even continue traversing
that queue) unless it can acquire parent channel mutex.
---snip---
Fix the locking in dsp.c to prevent a LOR (AFAIK not on the LOR page).
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
Tested with: INVARIANTS[1] and DIAGNOSTICS[2]
Tested by: netchild [1,2], David Reid <david@jetnet.co.uk> [1]
'buffers' pending NMIs from multiple interrupting PMCs and delivers
them serially.
Reported by: Olivier Crameri <olivier.crameri@epfl.ch>
MFC after: 3 days
In case this causes trouble for some other chipsets add a comment how to
proceed. If we don't get bugreports, this should be removed after a while
(some releases?).
PR: 56617 [1], 29465, 39260, 40574, 68225
Submitted by: Matthew E. Gove <mgove@comcast.net> [1]
believe that there are PC98 systems with an OPTi chip.
I don't know enough about this special PC architecture to be sure about
this, so let's find out by letting people with such a system complain in
case this commit breaks the sound system for them. It's easy to revert
then.
PR: 45673
Submitted by: Watanabe Kazuhiro <CQG00620@nifty.ne.jp>
same as today: do no power management. 1 means be conservative about
what you power down (any device class that has caused problems gets
added here). 2 means be agressive about what gets powered down (any
device class that's fundamental to the system is here). 3 means power
them all down, reguardless. The default is 1.
The effect in the default system is to add mass storage devices to the
list that we don't power down. From all the pciconf -l lists that
I've seen for the aac and amr issue, the bad device has been a mass
storage device class.
This is an attempt at a compromise between the very small number of
systems that have extreme issues with powerdown, and the very large
number of systems that gain real benefits from powerdown (I get about
20% more battery life when I attach a minimal set of drivers on my
Sony). Hopefully it will strike the proper balance.
MFC After: 3 days (before next beta)
* New definition CHN_F_HAS_VCHAN.
- channel.c
* Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead
of relying on SLIST_EMPTY(&channel->children) == true for better
clarification and future possible usages of children (like
'slave' channel).
* Various fixes, including blocksize / format bps allignment,
better 24bit seeking (mplayer, others).
* Improve format chain building, it's now possible to record something
to a format non-native to the soundcard through various feeder format
converters or to higher sampling rate. This also gains another feature,
like doing vchan mixing on non s16le soundcard such as sb8.
- sound.c
* Increase robustness within various function that handle vchan
creation / termination (these function need a total rewrite, but
that would cause other major rewrite within various places too!).
As far as its robustness can be guaranteed, leave it as is.
* Optimize channel ordering, prefer *real* hardware playback
channels over virtual channels. cat /dev/sndstat should look
better.
* Increase sndstat verbosity to include bufsoft/bufhard allocation.
- vchan.c
* Fix LOR 119.
- http://sources.zabbadoz.net/freebsd/lor.html#119
* Reorder / increase robustness of vchan_create() / destroy().
Enforce destroy_dev() during destroy operation, fix possible
panic / dangling character device.
- http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html
* Tolerate a little bit more during mixing process, this should help
non s16le soundcards.
Note: Recoring in a non-native rate/format may result in overruns. A friendly
application is wavrec from audio/wavplay. The problem is under
investigation.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
From the PR:
---snip---
The vibra16X supports full duplex. I traced the Windows driver, and what is
does is that it programs one DMA channel 8-bit, and the other 16-bit. There
might be some kind of auto detection logic here, because it always uses 8-bit
for playback, even if I play 16-bit sound ...
---snip---
PR: 80977
Submitted by: Hans Petter Selasky <hselasky@c2i.net>
Reduce the size of ed a little by removing some CIS based entries (others
likely can be removed too):
o The D-Link DFE-670TXD doesn't need its own entry based on strings.
o The Xircom CompactCard appears to be a TDK design, so list it there by ID
and remove the strings.
Increase the size of ed a little:
o Add support for the Addtron AE-660CT and Addtron AE-660. This is a very
generic NE-2000 clone (so generic that its CIS tags say NE-2000 generic
card!).
