With the update to llvm 13 we are able to tell the compiler it can find
the SSP canary relative to the register that holds the userspace stack
pointer. As this is unused in most of the kernel it can be used here
to point to a per-thread SSP canary.
As the kernel could be built with an old toolchain, e.g. when upgrading
from 13, add a warning that the options was enabled but the compiler
doesn't support it to both the build and kernel boot.
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33079
Belatedly remove twa(4). It was supposed to go before 13.0, but was
overlooked.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33114
Belatedly remove esp(4). It was tagged as gone in 13, but was overlooked
until now.
Sponsored by: Netflix
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33115
Belatedly remove amr(4). It was slated to depart before 13.0 but was
overlooked until now.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33113
Belatedly remove iir(4). It was slated to go before 13, but was
overlooked.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33112
We'd said this was going away in 13, but was overlooked. Belatedly
remove.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33111
The iavf(4) driver now uses a different source base from ixl(4), since
it will be the standard VF driver for new Intel Ethernet products going
forward, including ice(4). It continues to use the iflib framework
for network drivers.
Since it now uses a different source code base, this commit adds a new
sys/dev/iavf entry, but it re-uses the existing module name so no
configuration changes are necessary.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: kbowling@
Tested by: lukasz.szczepaniak@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D28636
in_cksum() and related routines are implemented separately for each
platform, but only i386 and arm have optimized versions. Other
platforms' copies of in_cksum.c are identical except for style
differences and support for big-endian CPUs.
Deduplicate the implementations for the rest of the platforms. This
will make it easier to implement in_cksum() for unmapped mbufs. On arm
and i386, define HAVE_MD_IN_CKSUM to mean that the MI implementation is
not to be compiled.
No functional change intended.
Reviewed by: kp, glebius
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33095
Add driver for pcf85063 real time clock. Register set and get time
methods. Parse data obtained from bus according to specification
and fill kernel structures.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32817
Driver for tca6408 gpio expander over i2c bus. Expose API for
manipulating pin's direction, state and polarity inversion.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32819
DP83822 is a 10/100 Texas Instruments PHY.
Link status change interrupts are supported by the driver,
however not all boards have the PHY interrupt wired.
Because of that if failure to allocate an IRQ is not treated as an error.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32815
DP83867 is a 10/100/1000 Texas Instruments PHY.
Only SGMII mode is supported.
Link status changes can be checked through an interrupt generated by the PHY,
if available
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32813
With this change if_index can become static. There is nothing
that if_debug.c would want to isolate from if.c. Potentially
if.c wants to share everything with if_debug.c.
Move Bjoern's copyright to if.c.
Reviewed by: bz
Print some warning when export is requested for non-existing symbol.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32878
Previously, the code would copy twice as many pointers as specified
and print pairs of them a single 64-bit pointer.
abort2 doesn't return so make the return type void
freebsd32_abort2 is in it's own file with a 2-clause BSD license
based on a discussion with Wojciech many years ago.
Reviewed by: kevans
Commit dae1713419 did not add two required lines for edonr specific
functionality to this file, causing kernel build failures if ZFS is
compiled in.
This commit should be included in an eventual MFC of dae1713419.
This make the base driver cleaner and the subclassed driver only have
related code.
Kernel config wise this is still only handled by rk805.
No functional changes intended.
Even if for now all the RTC-related register are at the same offset don't
use some hardcoded values for them but set them based on the PMIC type.
No functional changes intended.
Since the upstream merge we end up with the compiler generating calls to
memcpy (and it appears upstream LLVM does too, so this will probably
also be a problem upstream when the LLVM 13 import is finished). Like
the kernel we should just compile this file with -ffreestanding to avoid
such surprises.
Note that elf_trampoline.c does actually provide a memcpy, but it's
static. That's a bit weird, and means by the time the memcpy calls are
generated by the compiler the explicit ones have already been inlined
and the function itself GC'ed, but since using -ffreestanding is the
right thing to do for this kind of code anyway, that doesn't actually
matter.
Obtained from: https://github.com/CTSRD-CHERI/cheribsd/commit/219ddb6293c
NOTE: HEADS UP read the note below if your kernel config is not including GENERIC!!
This patch does a bit of cleanup on TCP congestion control modules. There were some rather
interesting surprises that one could get i.e. where you use a socket option to change
from one CC (say cc_cubic) to another CC (say cc_vegas) and you could in theory get
a memory failure and end up on cc_newreno. This is not what one would expect. The
new code fixes this by requiring a cc_data_sz() function so we can malloc with M_WAITOK
and pass in to the init function preallocated memory. The CC init is expected in this
case *not* to fail but if it does and a module does break the
"no fail with memory given" contract we do fall back to the CC that was in place at the time.
This also fixes up a set of common newreno utilities that can be shared amongst other
CC modules instead of the other CC modules reaching into newreno and executing
what they think is a "common and understood" function. Lets put these functions in
cc.c and that way we have a common place that is easily findable by future developers or
bug fixers. This also allows newreno to evolve and grow support for its features i.e. ABE
and HYSTART++ without having to dance through hoops for other CC modules, instead
both newreno and the other modules just call into the common functions if they desire
that behavior or roll there own if that makes more sense.
Note: This commit changes the kernel configuration!! If you are not using GENERIC in
some form you must add a CC module option (one of CC_NEWRENO, CC_VEGAS, CC_CUBIC,
CC_CDG, CC_CHD, CC_DCTCP, CC_HTCP, CC_HD). You can have more than one defined
as well if you desire. Note that if you create a kernel configuration that does not
define a congestion control module and includes INET or INET6 the kernel compile will
break. Also you need to define a default, generic adds 'options CC_DEFAULT=\"newreno\"
but you can specify any string that represents the name of the CC module (same names
that show up in the CC module list under net.inet.tcp.cc). If you fail to add the
options CC_DEFAULT in your kernel configuration the kernel build will also break.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc.
RELNOTES:YES
Differential Revision: https://reviews.freebsd.org/D32693
AES-CBC OpenSSL assembly is used underneath.
The glue layer(ossl_aes.c) is based on CHACHA20 implementation.
Contrary to the SHA and CHACHA20, AES OpenSSL assembly logic
does not have a fallback implementation in case CPU doesn't
support required instructions.
Because of that CPU caps are checked during initialization and AES
support is advertised only if available.
The feature is available on all architectures that ossl supports:
i386, amd64, arm64.
The biggest advantage of this patch over existing solutions
(aesni(4) and armv8crypto(4)) is that it supports SHA,
allowing for ETA operations.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: jhb (previous version)
Differential revision: https://reviews.freebsd.org/D32099
Not sure why these haven't been committed with the rest of the SoC Audio
project. They work sufficiently well for me.
Discussed with: manu
MFC after: 1 month
It adds the PIC functionality on top of qoriq_gpio driver.
We need a separate module since the powerpc PIC API is completely
different than on other architectures.
Two types of intr_map_data are supported:
INTR_MAP_DATA_GPIO and INTR_MAP_DATA_FDT.
This way interrupts can be allocated using the userspace gpio
interrupt allocation method, as well as directly from simplebus.
The latter can be used by devices that have its irq routed to a GPIO pin.
Obtained from: Semihalf
Sponsored by: Alstom Group
AES-CBC OpenSSL assembly is used underneath.
The glue layer(ossl_aes.c) is based on CHACHA20 implementation.
Contrary to the SHA and CHACHA20, AES OpenSSL assembly logic
does not have a fallback implementation in case CPU doesn't
support required instructions.
Because of that CPU caps are checked during initialization and AES
support is advertised only if available.
The feature is available on all architectures that ossl supports:
i386, amd64, arm64.
The biggest advantage of this patch over existing solutions
(aesni(4) and armv8crypto(4)) is that it supports SHA,
allowing for ETA operations.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D32099
It appears that the emitted code in the caller does not update shadow
state for values passed on the stack to the callee, which it seemingly
ought to do after pushing values on the stack and prior to the call
itself. This leaves open a window where an interrupt handler can cause
regions of the stack containing these values to be poisoned, resulting
in rare false positive reports. This happens particularly in the amd64
TLB invalidation code, where we liberally pass cpuset_t's around by
value.
LLVM has a flag to disable validation of accesses of function parameters
passed by value. Such validation is itself a relatively new feature.
Turn it off for now.
Reported by: pho, syzkaller
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This makes hwpmc(4) sampling work on ACPI-based AArch64 systems.
Tested on ARM Neoverse N1.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: jrtc27, mhorne
Differential Revision: https://reviews.freebsd.org/D24423
It was previously used by felix(4) for PHY communication.
Since that is not the case anymore this driver is now left unused.
Obtained from: Semihalf
Sponsored by: Alstom Group
The new iSCSI initiator iscsi(4) was introduced with FreeBSD 10.0, and
the old intiator was marked obsolete shortly thereafter (in commit
d32789d95c, MFC'd to stable/10 in ba54910169). Remove it now.
Reviewed by: jhb, mav
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32673
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
The upcoming QCA ipq401x support detects the CP14 debug features,
but any attempt to use it causes an undefined instruction error.
It apparently needs a specific TZ image loaded by the early bootloader
(SBL) in order to enable these kinds of features.
So add a new kernel option that explicitly disables this in the
arm code - the debugger works fine without it.
These are hardware configuration options which are required in
the linux/openwrt device trees for the IPQ4018/IPQ4019 devices.
Since this isn't obtained from linux upstream but instead from
openwrt, this can't go in contrib; instead it is going in
sys/dts/include/ .
Obtained from: OpenWRT
Tested:
* IPQ4019 ASUS RT-AC58U AP, initial bootstrapping
This partially reverts e81e77c5a0, leaving the option both in
GENERICs on amd64/arm64/arm, and in global NOTES file. Apparently
this better matches existing practice, where we do not try to hard
to make LINT and GENERIC complimentary.
Requested and reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Remove the option from NOTES/LINT, and add to NOTES for powerpc and
riscv.
PR: 259036
Requested by: John Hay <john@sanren.ac.za>
Discussed with: ian, imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
also move ptrace-related helpers to ptrace_machdep.c
Apply some style. Use ANSI C function definitions.
Remove MPSAFE annotations.
Reviewed by: emaste, imp
Discussed with: jrtc27
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32310
The FreeBSD nvme driver has reset the nvme controller twice on attach to
address a theoretical issue assuring the hardware is in a known
state. However, exierence has shown the second reset is unnecessary and
increases the time to boot. Eliminate the second reset. Should there be
a situation when you need a second reset (for buggy or at least somewhat
out of the mainstream hardware), the hardware option NVME_2X_RESET will
restore the old behavior. Document this in nvme(4).
If there's any trouble at all with this, I'll add a sysctl tunable to
control it.
Sponsored by: Netflix
Reviewed by: cperciva, mav
Differential Revision: https://reviews.freebsd.org/D32241
The previous update to handle the gicv2m as a child of the gicv3 driver
assumed there was only a single gicv2m child. On some hardware there
are multiple children. Support this by removing the mbi ivars and
adding a new interface to handle MSI allocation in a given range.
Tested by: mw, trasz
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32224
The ng_h4 module was disconnected 13 years ago when the tty later was
locked by Ed. It completely fails to compile, and has a number of false
positives for Giant use. Remove it for lack of interest. Bluetooth has
largely (completely?) moved on from bluetooth over UART transport.
OK'd by: emax
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31846
except linux/pci.h to avoid conflicts with Linux version.
This allows to #define resource in drm-kmod globally and strip some #ifdef-s
Reviewed by: hselasky, manu
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D31673
Add support for ACPI device probing for SDHCI controller found on Marvell chips.
Reviewed by: mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31600
This patch splits driver code into two seperate files sdhci_xenon.c
and sdhci_xenon_fdt.c. This will allow future implementation of ACPI
discovery of sdhci on Xenon chips.
Reviewed by: mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31599
The firmwares and the following changelog are from the "Chelsio Unified
Wire v3.15.0.0 for Linux."
Version : 1.26.2.0
Date : 09/24/2021
====================
FIXES
-----
BASE:
- Added support for SFP+ RJ45 (0x1C).
- Fixing backward compatibility issue with older drivers when multiple
speeds are passed to firmware.
OFLD:
- Do not touch tp_plen_max if driver is supplying tp_plen_max. This
fixes a connection reset issue in iscsi.
ENHANCEMENTS
------------
BASE:
- Firmware header modified to add firmware binary signature.
MFC after: 1 month
Sponsored by: Chelsio Communications
GCC complains about the use of alloca() with variable sizes (for XSAVE
state len) in sendsig() for i386. Modern XSAVE state is probably
getting a bit large for the i386 kstack, but downgrade the error to a
warning.
Reviewed by: kib, emaste
Differential Revision: https://reviews.freebsd.org/D31934
According to https://github.com/NuxiNL/cloudlibc:
CloudABI is no longer being maintained. It was an awesome experiment,
but it never got enough traction to be sustainable.
There is no reason to keep it in FreeBSD.
Approved by: ed (private mail)
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31923
from machdep.c which is too large pile of unrelated things.
Some ptrace functions are moved from machdep.c to ptrace_machdep.c.
Now machdep.c contains code mostly related to the low level initialization
and regular low level operation of the architecture, while signal MD code
and registers handling is placed in exec_machdep.c.
Reviewed by: jhb, markj
Discussed with: jrtc27
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31954
Add generic mmc_helper which uses newly introduced device_*_property
api. Thanks to this change the sd/mmc drivers will be capable
of parsing both DT and ACPI description.
Ensure backward compatibility for all mmc_fdt_helper users.
Reviewed by: manu, mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31598
Add two files base.c and base.h to reduce the redundancy
in the silicon family code.
Remove the code duplication from e1000_82575 files.
Clean family specific functions from base.
Fix up a stray and duplicate function declaration.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (44dddd14059f151f39f7e075b887decfc9a10f11)
MFC after: 1 week
When building ENA as compiled into the kernel, the driver would fail to
build. Resolve the problem by introducing the following changes:
1. Add missing `ena_rss.c` entry in `sys/conf/files`.
2. Prevent SYSCTL_ADD_INT from throwing an assert due to an extra
CTLTYPE_INT flag.
Fixes: 986e7b9227 ("ena: Move RSS logic into its own source files")
Fixes: 6d1ef2abd3 ("ena: Implement full RSS reconfiguration")
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
MFC after: 1 week
ib_uverbs_flow_resources_free() is declard in two header files in
upstream OFED. Disable the warning to avoid introducing diffs to fix
the build on GCC 9.
While here, fix the ibcore module to disable the same warnings
disabled in OFED_CFLAGS.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D31943
- kern_kcov.c needs to be compiled with -fsanitize=kernel-memory when
KMSAN is configured since it calls into various other subsystems.
- Disable address and memory sanitizers in kcov(4)'s coverage sanitizer
callbacks, as they do not provide useful checking. Moreover, with
KMSAN we may otherwise get false positives since the caller (coverage
sanitizer runtime) is not instrumented.
- Disable KASAN and KMSAN interceptors in subr_coverage.c, as they do
not provide any benefit but do introduce overhead when fuzzing.
Sponsored by: The FreeBSD Foundation
The file as is is the maze of #ifdef passages, all slightly different.
Divorcing i386 and amd64 version actually makes changing the code
easier, also no changes for i386 are planned.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31931
- Re-implement pcib interface to use standard pci bus driver on top of
vmd(4) instead of custom one.
- Re-implement memory/bus resource allocation to properly handle even
complicated configurations.
- Re-implement interrupt handling to evenly distribute children's MSI/
MSI-X interrupts between available vmd(4) MSI-X vectors and setup them
to be handled by standard OS mechanisms with minimal overhead, except
sharing when unavoidable.
Successfully tested on Dell XPS 13 laptop with Core i7-1185G7 CPU (VMD
device ID 0x9a0b) and single NVMe SSD, dual-booting with Windows 10.
Successfully tested on Supermicro X11DPI-NT motherboard with Xeon(R)
Gold 6242R CPUs (VMD device ID 0x201d), simultaneously handling NVMe
SSD on one PCIe port and PLX bridge with 3 NVMe and 1 AHCI SSDs on
another. Handles SSD hot-plug (except Optane 905p for some reason,
which are not detected until manual bus rescan) and enabled IOMMU
(directly connected SSDs work, but ones connected to the PLX fail
without errors from IOMMU).
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential revision: https://reviews.freebsd.org/D31762
Switch the main syscall table to use CAPENABLED flags rather than
capabilities.conf. This avoid synchronization issues between
syscalls.master and capabilities.conf (e.g. when renaming a syscall
during development).
For now, move capabilities.conf to sys/compat/freebsd32 and use it
there. Use of sys/compat/freebsd32/syscalls.master should be replaced
by makesyscalls.lua enhancements to allow the main one to be used.
This change results in no changes to generated files after running
`make sysent`.
Reviewed by: kevans, emaste
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D31350
Clang 13.0.0 now has a -Wunused-but-set-variable warning similar to the
one gcc has had for quite a while. Since this triggers *very* often for
our kernel builds, don't make it a hard error, but leave the warning
visible so is some incentive to fix the instances.
MFC after: 3 days
MANA is the new network adapter from Microsoft which will be available
in Azure public cloud. It provides SRIOV NIC as virtual function to
guest OS running on Hyper-V.
The code can be divided into two major parts. Gdma_main.c is the one to
bring up the hardware board and drives all underlying hardware queue
infrastructure. Mana_en.c contains all main ethernet driver code.
It has only tested and supported on amd64 architecture.
PR: 256336
Reviewed by: decui@microsoft.com
Tested by: whu
MFC after: 2 week
Relnotes: yes
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D31150
Add support for the KVM paravirtual clock device.
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29733
Make inclusion of `sys/x86/x86/pvclock.c` contingent on that of its
dependents.
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D31417
ISA 3.0 allows for nested radix translations with minimal to no
involvement of the hypervisor. This should make pseries signficantly
faster on POWER9 pseries instances, as fewer hypercalls are needed to
manage pmap now.
MFC after: 2 weeks
Relnotes: yes
KMSAN enables the use of LLVM's MemorySanitizer in the kernel. This
enables precise detection of uses of uninitialized memory. As with
KASAN, this feature has substantial runtime overhead and is intended to
be used as part of some automated testing regime.
The runtime maintains a pair of shadow maps. One is used to track the
state of memory in the kernel map at bit-granularity: a bit in the
kernel map is initialized when the corresponding shadow bit is clear,
and is uninitialized otherwise. The second shadow map stores
information about the origin of uninitialized regions of the kernel map,
simplifying debugging.
KMSAN relies on being able to intercept certain functions which cannot
be instrumented by the compiler. KMSAN thus implements interceptors
which manually update shadow state and in some cases explicitly check
for uninitialized bytes. For instance, all calls to copyout() are
subject to such checks.
The runtime exports several functions which can be used to verify the
shadow map for a given buffer. Helpers provide the same functionality
for a few structures commonly used for I/O, such as CAM CCBs, BIOs and
mbufs. These are handy when debugging a KMSAN report whose
proximate and root causes are far away from each other.
Obtained from: NetBSD
Sponsored by: The FreeBSD Foundation
With current generation clang/llvm it can pass all of our tests in
libc/ssp.
While here, remove the extra MACHINE_CPUARCH check for mips. SSP is
included in BROKEN_OPTIONS for this architecture in src.opts.mk, which
is enough to ensure normal builds won't set SSP_CFLAGS.
Reviewed by: kevans, imp, emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31400
After recent arm64 GENERIC config cleanup the ENETC MDIO
in NXP LS1028A SoC should support being loaded as a module.
Obtained from: Semihalf
Sponsored by: Alstom Group
It is found on boards equipped with LS1028A SoC.
802.1q VLAN grouping is supported.
An external MDIO device is used for communicating with PHYs.
The driver is built as a module by default, it is not included
in GENERIC kernel config.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30923
Allow any 2M aligned contiguous location below 4G for the staging
area location. It should still be mapped by loader at KERNBASE.
The assumption kernel makes about loader->kernel handoff with regard to
the MMU programming are explicitly listed at the beginning of hammer_time(),
where kernphys is calculated. Now kernphys is the variable instead of
symbol designating the physical address.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31121
KASAN and KCSAN implement interceptors for various primitive operations
that are not instrumented by the compiler. KMSAN requires them as well.
Rather than adding new cases for each sanitizer which requires
interceptors, implement the following protocol:
- When interceptor definitions are required, define
SAN_NEEDS_INTERCEPTORS and SANITIZER_INTERCEPTOR_PREFIX.
- In headers that declare functions which need to be intercepted by a
sanitizer runtime, use SANITIZER_INTERCEPTOR_PREFIX to provide
declarations.
- When SAN_RUNTIME is defined, do not redefine the names of intercepted
functions. This is typically the case in files which implement
sanitizer runtimes but is also needed in, for example, files which
define ifunc selectors for intercepted operations.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
The timer is not used on ARM.
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29041
Minor changes are necessary to make this processor-independent, but
moving the file out of x86 and into common is the first step (so
others don't add /more/ x86-isms).
Submitted by: Elliott Mitchell <ehem+freebsd@m5p.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D29042
Overview:
This is the first stage of a RDMA stack upgrade introducing kernel
changes only based on Linux 5.7-rc1.
This patch is based on about four main areas of work:
- Update of the IB uobjects system:
- The memory holding so-called AH, CQ, PD, SRQ and UCONTEXT objects
is now managed by ibcore. This also require some changes in the
kernel verbs API. The updated verbs changes are typically about
initialize and deinitialize objects, and remove allocation and
free of memory.
- Update of the uverbs IOCTL framework:
- The parsing and handling of user-space commands has been
completely refactored to integrate with the updated IB uobjects
system.
- Various changes and updates to the generic uverbs interfaces in
device drivers including the new uAPI surface.
- The mlx5_ib_devx.c in mlx5ib and related mlx5 core changes.
Dependencies:
- The mlx4ib driver code has been updated with the minimum changes
needed.
- The mlx5ib driver code has been updated with the minimum changes
needed including DV support.
Compatibility:
- All user-space facing APIs are backwards compatible after this
change.
- All kernel-space facing RDMA APIs are backwards compatible after
this change, with exception of ib_create_ah() and ib_destroy_ah()
which takes a new flag.
- The "ib_device_ops" structure exist, but only contains the driver ID
and some structure sizes.
Differences from Linux:
- Infiniband drivers must use the INIT_IB_DEVICE_OPS() macro to set
the sizes needed for allocating various IB objects, when adding
IB device instances.
Security:
- PRIV_NET_RAW is needed to use raw ethernet transmit features.
- PRIV_DRIVER is needed to use other privileged operations.
Based on upstream Linux, Torvalds (5.7-rc1):
8632e9b5645bbc2331d21d892b0d6961c1a08429
MFC after: 1 week
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31149
Sponsored by: NVIDIA Networking
We failed to list the new pf_syncookies.c file in sys/conf/files. This
worked for the usual configurations, where pf is a module, but not for
LINT builds.
Reported by: lwhsu
MFC after: 1 week
Sponsored by: Modirum MDPay
The bcmp symbol is not used, at the same time memcmp as pulled from
libkern does byte-by-byte comparison.
So happens bcmp as found in support.S is in fact renamed memcmp, rename
it back.
Discussed with: cognet
Sponsored by: Rubicon Communications, LLC ("Netgate")
Some downstream configurations do not store secrets in the
early (loader/static) environments and desire a way to preserve these
for diagnostic reasons. Provide an option to do so.
Reviewed by: imp, jhb (earlier version)
Differential Revision: https://reviews.freebsd.org/D30834
Changes since 1.25.6.0 are listed here. This list comes from the
Release Notes for "Chelsio Unified Wire 3.14.0.4 for Linux" dated
2021-07-08.
Fixes
-----
BASE:
- Wait 5ms before and after the i2c command that clears the mod_select.
This fixes incorrect port module type read from i2c.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
This controller supports 2.5G/1G/100MB/10MB speeds, and allows
tx/rx checksum offload, TSO, LRO, and multi-queue operation.
The driver was derived from code contributed by Intel, and modified
by Netgate to fit into the iflib framework.
Thanks to Mike Karels for testing and feedback on the driver.
Reviewed by: bcr (manpages), kbowling, scottl, erj
MFC after: 1 month
Relnotes: yes
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30668
Rather than extending syr827 for syr828 (as initially done in D31103)
switch to the Fairchild Semiconductor Corporation fan53555 implementation
which is in-tree but was not attached to the build. The fan53555
implementation also supports syr827/syr8278 already. [1]
Update NOTES and the arm64 GENERIC configuration for the switch.
syr827 for now stays in the tree but is not used by any
kernel configuration.
Suggested by: mmel [1]
Reviewed by: mmel, manu
Differential Revision: https://reviews.freebsd.org/D31112
The r intc interrupt controller seems to do a lot of things :
- It can handle the NMI interrupt
- It have local interrupts for some device that also can be muxed with GIC
- It can serve as an forwarder for the GIC
It's mostly used for deepsleep/wakeup if I understood correctly and we do not
support this on arm64.
For now just forward everything to the GIC so interrupts works again for device
which now have this interrupts controller set since dts v5.12
Sponsored by: Diablotin Systems
This version is intended to be used with the 0.29.4 version of the
ice(4) driver, which will be be committed afterwards.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: stallamr_netapp.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D30887
Implement support for the NXP LS1028A SoC MDIO controller.
It is attached to the internal PCI root complex.
The controller is used to communicate with PHYs of ports connected
to the internal switch.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30731
ENETC it a gigabit Ethernet controller found on the LS1028A board.
It supports basic VLAN offloads - tag extraction, injection and hardware
filtering. Inband MDIO connectivity is used for link status
monitoring through the miibus interface. Fixed-link mode is also
supported, which allows for operation of internal cpu to switch port.
Since no admin interrupts are present in hardware, link status polling
has to be used.
Due to a hardware bug software reset of the NIC results in a external
abort. Because of that most of the hardware initialization is done
during attach. This also means that in the case of an fatal error full
board reset is required.
The enetc_hw.h header was imporoted from Linux. It is dual licensed.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30729
Stop confusing people, retire COMPAT_LINUX and COMPAT_LINUX32 kernel
build options. Since we have 32 and 64 bit Linux emulators, we can't build both
emulators together into the kernel. I don't think it matters, Linux emulation
depends on loadable modules (via rc).
Cut LINPROCFS and LINSYSFS for consistency.
PR: 215061
Reviewed by: bcr (manpages), trasz
Differential Revision: https://reviews.freebsd.org/D30751
MFC after: 2 weeks
jhb@ pointed out an extra plural in this phrase and a gramatical error,
so reword a little to be less awkward to fix both issues.
Sponsored by: Netflix
Last an(4) devices have been End Of Life and End Of Sale in 2007.
Time to remove this driver.
Differential Revision: https://reviews.freebsd.org/D30679
Reviewed by: imp (earlier version), emaste (earlier version)
Sponsored by: Diablotin Systems
This framework is initial implementation of the simple-audio-card compatible
audio driver framework. It provides glue for CPU/codec/aux device.
Differential Revision: https://reviews.freebsd.org/D27830
Some arm64 SoCs have nodes in their fdts that describe devices
connected to the internal PCI bus. One such SoC is Freescale LS1028A.
In order to access information stored in them we need to add ofw bus
support to pci. Pass devinfo request up to our parent, which
is responsible for parsing all the information.
It allows to use ofw interface on PCI devices that support it.
This method is similar to sys/dev/acpica/acpi_pci.c.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30181
The vmbus ISR needs to live in a trampoline. Dynamically allocating a
trampoline at driver initialization time poses some difficulties due to
the fact that the KENTER macro assumes that the offset relative to
tramp_idleptd is fixed at static link time. Another problem is that
native_lapic_ipi_alloc() uses setidt(), which assumes a fixed trampoline
offset.
Rather than fight this, move the Hyper-V ISR to i386/exception.s. Add a
new HYPERV kernel option to make this optional, and configure it by
default on i386. This is sufficient to make use of vmbus(4) after the
4/4 split. Note that vmbus cannot be loaded dynamically and both the
HYPERV option and device must be configured together. I think this is
not too onerous a requirement, since vmbus(4) was previously
non-functional.
Reported by: Harry Schmalzbauer <freebsd@omnilan.de>
Tested by: Harry Schmalzbauer <freebsd@omnilan.de>
Reviewed by: whu, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30577
OBJS are automatically added to CLEANFILES. For pre-built objects, this
is not desirable since it will delete the object from the source
tree. Introduce EXTRA_OBJS which list these object files, but aren't
added to clean files.
Sponsored by: Netflix
Reviewed by: emaste@
Differential Revision: https://reviews.freebsd.org/D30615
The KCSAN_ENABLED variable is non-empty when the kernel is being built
with KCSAN. This allows us to disable modules that are known to be
broken.
There was a bug where we would check if it was defined. As this is
always the case the KCSAN_ENABLED variable would be set when building
modules so we would never build such a module. Fix this by checking
if the value is empty before passing it on to the module stage.
This doesn't affect how modules are built as the CFLAGS passed to
modules has the correct check.
Reported by: rstone
Sponsored by: Innovate UK
Changes since 1.25.0.0 are listed here. This list comes from the
Release Notes for the "Chelsio Unified Wire v3.14.0.3 for Linux"
release dated 2021-05-21.
Fixes
-----
BASE:
- Fixed Back to back T6 100G-CR4 link coming up with NO FEC sometimes.
- [T5] Try to bring up link in 1G speed if link doesn't come up on 10G.
- Fixed a bug to not allow BaseR fec in 100G speed.
- Fixed linkup issues on BT adapter in 1G and 100M speed.
- Fixed an issue to allow driver to send VI_ENABLE multiple times (once
with rx disable and then later rx enable).
- Fixed rate limiting not working on class number 16 to 30.
- Fixed backward compatibility issue in port type interpretation with vpd
version 0x80.
ETH:
- Fixed a case when firmware failed to deliver NIC WR completion to host.
- No rate limit support for WR ETH_TX_PKTS2 due to performance reasons.
OFLD
- Fixed a connection hang in SO adapters when tp_plen_max (set by driver)
is more than the window size.
- Added fw_filter_vnic_mode to firmware API file (t4fw_interface.h)
- Use correct rx channel in coprocessor crypto completion (CPL_FW6_PLD). This
was causing out of order completion to host.
FOiSCSI
- Fixed a crash due to unaligned access of ipv6 address.
- Fixed a crash during lun reset.
Enhancements
------------
ETH:
- Rate limiting support added for encapsulated (vxlan, nvgre, geneve) NIC TCP
packets.
OFLD:
- More than 128 SGLs supported in FW_RI_FR_NSMR_WR. Now, more than 16GB
(upto 64GB) of PBLs can be written with single FW_RI_FR_NSMR_WR.
Obtained from: Chelsio Communications
MFC after: 1 month
Sponsored by: Chelsio Communications
This removes support for loadable software backends. The KTLS OCF
support is now always included in kernels with KERN_TLS and the
ktls_ocf.ko module has been removed. The software encryption routines
now take an mbuf directly and use the TLS mbuf as the crypto buffer
when possible.
Bump __FreeBSD_version for software backends in ports.
Reviewed by: gallatin, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30138
This driver is used to power up sdio card or eMMC.
It handle the reset-gpio, clocks and needed delays for powerup/powerdown.
Sponsored by: Diablotin Systems
Differential Revision: https://reviews.freebsd.org/D30288
It's a class0 driver that implements some pcib methods and creates
a pci bus as its children.
The "ofw_pci" name will be used by a new driver that will be a subclass
of the pci bus.
No functional changes intended.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30226
Summary:
To make it easier to build a kernel with PowerISA 2.06 atomics (sub-word
atomics), add a kernel config option. User space still needs to specify
it as a CFLAG but that seems easier to do than for the kernel config.
Reviewed By: luporl
Differential Revision: https://reviews.freebsd.org/D29809
PVHv1 was officially removed from Xen in 4.9, so just axe the related
code from FreeBSD.
Note FreeBSD supports PVHv2, which is the replacement for PVHv1.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, Elliott Mitchell
Differential Revision: https://reviews.freebsd.org/D30228
The new driver provides probe and attach functions for the NXP LS1028A
clockgen and passes configuration information to QorIQ clockgen class.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30125
During early qemu development, the /soc node was marked as compatible
with "riscv-virtio-soc" instead of "simple-bus".
This was changed in qemu 53f54508dae6 in Sep 2018, and predates the
baseline required qemu version (5.0) for riscv by a wide margin.
The generic simplebus code handles attachment in all cases nowadays.
Sponsored by: Tag1 Consulting, Inc.
Reviewed by: jrtc27, mhorne
Differential Revision: https://reviews.freebsd.org/D30011
This adds a generic sim that abstract a lot of what needs to be implemented
in a driver for mmccam support.
A new interface with three methods is added :
- mmc_sim_get_tran_settings: Use to get what the controller supports in term
of capabilities, freq etc ...
- mmc_sim_set_tran_settings: Use to change the speed/freq/etc of the
sdcard host controller
- mmc_sim_cam_request: Used for MMCIO requests
Differential Revision: https://reviews.freebsd.org/D27485
Reviewed by: kibab
KASAN enables the use of LLVM's AddressSanitizer in the kernel. This
feature makes use of compiler instrumentation to validate memory
accesses in the kernel and detect several types of bugs, including
use-after-frees and out-of-bounds accesses. It is particularly
effective when combined with test suites or syzkaller. KASAN has high
CPU and memory usage overhead and so is not suited for production
environments.
The runtime and pmap maintain a shadow of the kernel map to store
information about the validity of memory mapped at a given kernel
address.
The runtime implements a number of functions defined by the compiler
ABI. These are prefixed by __asan. The compiler emits calls to
__asan_load*() and __asan_store*() around memory accesses, and the
runtime consults the shadow map to determine whether a given access is
valid.
kasan_mark() is called by various kernel allocators to update state in
the shadow map. Updates to those allocators will come in subsequent
commits.
The runtime also defines various interceptors. Some low-level routines
are implemented in assembly and are thus not amenable to compiler
instrumentation. To handle this, the runtime implements these routines
on behalf of the rest of the kernel. The sanitizer implementation
validates memory accesses manually before handing off to the real
implementation.
The sanitizer in a KASAN-configured kernel can be disabled by setting
the loader tunable debug.kasan.disable=1.
Obtained from: NetBSD
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29416
LLVM support for enabling KASAN has not yet landed so the option is not
yet usable, but hopefully this will change soon.
Reviewed by: imp, andrew
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29454
Use .o files directly. Replace the .o.uu files that we uudecode with .o files.
Adjust the kernel and module build to cope.
Suggestions by: markj@, emaste@
Sposnored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D29636
uudecode the .o.uu files and commit directly to the tree. Adjust the build
infrastructure to cope with the new location, both for the kernel and modules.
Sposnored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D29635
Store the .o files directly in the tree. We no longer need to play uuencode
games like we did in the CVS days. Adjust the build infrastructure to match.
Reviewed by: markj@
Sposnored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D29634
We no longer need to use uuencode to uuencode files in our tree. Store the .o
file directly instead. Adjust the build to cope with the new arrangement.
Suggestions by: emaste, bz, donner
Reviewed by: markm
Sposnored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D29632
This will make future extensions of the API much easier.
The intent is to remove support for DIOCADDRULE in FreeBSD 14.
Reviewed by: markj (previous version), glebius (previous version)
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29557
Summary:
They're nearly identical, so don't use two copies. Merge the newer
driver into the older one, and move it to a common location.
Add the Semihalf and associated copyrights in addition to mine, since
it's a non-trivial amount of code merged.
Reviewed By: mw
Differential Revision: https://reviews.freebsd.org/D29520
Handle the 'z' and 'Z' remote packets for manipulating hardware
watchpoints.
This could be expanded quite easily to support hardware or software
breakpoints as well.
https://sourceware.org/gdb/onlinedocs/gdb/Packets.html
Reviewed by: cem, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 51
Differential Revision: https://reviews.freebsd.org/D29173
This warning is very rarely useful (inline is a hint and not mandatory).
This flag results in many warnings being printed when compiling C++
code that uses the standard library with GCC.
This flag was originally added in back in r94332 but the flag is a no-op
in Clang ("This diagnostic flag exists for GCC compatibility, and has no
effect in Clang"). Removing it should make the GCC build output slightly
more readable.
Reviewed By: jrtc27, imp
Differential Revision: https://reviews.freebsd.org/D29235
This is a prerequisite to using these functions outside of ddb, but also
provides some cleanup and minor refactoring. This code is almost
entirely duplicated between the two implementations, the only
significant difference being the lack of dbreg synchronization on i386.
Cleanups are:
- demote some internal functions to static
- use the constant NDBREGS instead of a '4' literal
- remove K&R definitions
- some added comments
Reviewed by: kib, jhb
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29153
Clang 12 no longer supports -Wno-error-..., only the -Wno-error=...
style (which is already used everywhere else in the tree).
Differential Revision: https://reviews.freebsd.org/D29157
