not neccessary. It allows to avoid time counter jump of up to 1/18s, when
base frequency slightly tuned via machdep.i8254_freq sysctl.
Fix few style things.
Suggested by: bde
sending IPI to other CPUs. Otherwise, other CPUs will try to honor stale
value, programming timer for zero interval. If timer is fast enough,
it caused extra interrupt before timer correctly reprogrammed by BSP.
particular edge case where X-axis resolution is not multiple of font width.
Now we just advance enough scan lines, then deduct a partial scan line.
It is more intuitive than the previous code. Apply the same wisdom to EGA
and VGA planar renderers for consistency.
Reported by: David DEMELIER (demelier dot david at gmail dot com)
it possible to boot from ZFS RAIDZ for example from within VirtualBox.
The problem with VirtualBox is that its BIOS reports only one disk present.
If we choose to ignore this report, we can find all the disks available.
We can't have this work-around to be turned on by default, because some broken
BIOSes report true when it comes to number of disks, but present the same disk
multiple times.
separate the decision logic, of whether we can do TSO, and the
calculation of the burst length into two distinct parts.
Change the way the TSO burst length calculation is done. While
TSO could do bursts of 65535 bytes that can't be represented in
ip_len together with the IP and TCP header. Account for that and
use IP_MAXPACKET instead of TCP_MAXWIN as base constant (both
have the same value of 64K). When more data is available prevent
less than MSS sized segments from being sent during the current
TSO burst.
Add two more KASSERTs to ensure the integrity of the packets.
Tested by: Ben Wilber <ben-at-desync com>
MFC after: 10 days
When the driver is completely saturated with commands (1024 in the
case of the SAS2008 in my test system), I/O stops. If we tell CAM
that we have one less command slot than we have actually allocated,
everything works fine. We also need a few extra command slots to
allow for aborts and other task management commands to be sent down.
This needs more investigation to determine the root cause, but for
now this fixes things in my testing.
mps.c: Change a printf() to mps_printf().
mps_sas.c: Subtract 5 command slots when we tell CAM how many
commands we can handle.
Add some commented-out logic to print the contents
the CDBs for timed-out commands. This can help
in debugging devices that are timing out. This
will be uncommented once I bring some CAM changes in.
Reported by: Andrew Boyer <aboyer at averesystems dot com>
- Process some tx done messages in the transmit path, to ensure that
the XLR NA tx done FIFO does not overflow.
- Add a message ring handler API to process atmost a given number of
messages from a specified bucket mask. This will be used to process
the tx done messages
- Add a callout to restart transmit in the case transmit gets blocked.
- Update enable_msgring_int() and disable_msgring_int(), remove unused
args and make static.
Obtained from: Sriram Gorti (srgorti at netlogicmicro dot com)
KVA space is abundant on amd64, so there is no reason to limit kernel
map size to a fraction of available physical memory. In fact, it could
be larger than physical memory.
This should help with memory auto-tuning for ZFS and shouldn't affect
other workloads.
This should reduce number of circumstances for "kmem_map too small"
panics, but probably won't eliminate them entirely due to potential kmem
fragmentation.
In fact, you might want/need to limit maximum ARC size after this commit
if you need to resrve more memory for applications.
This change was discussed on arch@ and nobody said "don't do it".
MFC after: 6 weeks
Those checks are not present in upstream code and they are enforced in
actual calculations of delta by which ARC size can be grown or should be
reduced.
MFC after: 3 weeks
vm_paging_target() is not a trigger of any kind for pageademon, but
rather a "soft" target for it when it's already triggered.
Thus, trying to keep 2048 pages above that level at the expense of ARC
was simply driving ARC size into the ground even with normal memory
loads.
Instead, use a threshold at which a pagedaemon scan is triggered, so
that ARC reclaiming helps with pagedaemon's task, but the latter still
recycles active and inactive pages.
PR: kern/146410, kern/138790
MFC after: 3 weeks
Unluckily, using one-shot mode is impossible, when same hardware used for
time counting. Introduce new tunable hint.attimer.0.timecounter, setting
which to 0 disables i8254 time counter and allows one-shot mode. Note,
that on some systems there may be no other reliable enough time counters,
so this tunable should be used with understanding.
According to the MPT2 spec, task management commands are
serialized, and so no I/O should start while task management
commands are active.
So, to comply with that, freeze the SIM queue before we send any
task management commands (abort, target reset, etc.) down to the
IOC. We unfreeze the queue once the task management command
completes.
It isn't clear from the spec whether multiple simultaneous task
management commands are supported. Right now it is possible to
have multiple outstanding task management commands, especially in
the abort case. Multiple outstanding aborts do complete
successfully, so it may be supported.
We also don't yet have any recovery mechanism (e.g. reset the IOC)
if the task management command fails.
the name of the typescript file.
+ Add the 'command' argument (if supplied on the command line) to the
typescript file. This creates a more complete typescript when invoked
this way - more equal to invoking script without supplying the 'command'
argument.
to give way for the pluggable congestion control framework. It is
the task of the congestion control algorithm to set the congestion
window and amount of inflight data without external interference.
In 'struct tcpcb' the variables previously used by the inflight
limiter are renamed to spares to keep the ABI intact and to have
some more space for future extensions.
In 'struct tcp_info' the variable 'tcpi_snd_bwnd' is not removed to
preserve the ABI. It is always set to 0.
In siftr.c in 'struct pkt_node' the variable 'snd_bwnd' is not removed
to preserve the ABI. It is always set to 0.
These unused variable in the various structures may be reused in the
future or garbage collected before the next release or at some other
point when an ABI change happens anyway for other reasons.
No MFC is planned. The inflight bandwidth limiter stays disabled by
default in the other branches but remains available.
- Compile fixes for 9.0, the previous version of this driver was
for FreeBSD 6.
- Add virtual address field in OperationDescriptor_t, we cannot use
MIPS_PHYS_TO_KSEG0 on physical address.
- Fixes for new message ring API
- Remove unused sys/mips/rmi/dev/sec/stats.h
- Whitespace fixes
- Move RMI MIPS extension to atomic increment word (LDADDWU) to common
header file sys/mips/rmi/rmi_mips_exts.h
- Fix xlr_ldaddwu() for 64 bit, it is a 32 bit operation, use
unsigned int* instead of unsigned long* argument
- Provide dummy xlr_enable_kx/xlr_restore_kx for n32 and n64.
- Provide xlr_paddr_ld() instead of xlr_paddr_lw(), so that the
descriptor formats are same for 32 and 64 bit
- update nlge and rge for the changes
These changes are also needed by the security driver which will be
added later.
already updated after allocating mbuf so driver had to use the last
index instead of using next producer index. This should fix driver
hang which may happen under high network load.
Reported by: Igor Sysoev <is <> rambler-co dot ru>, Vlad Galu <dudu <> dudu dot ro>
Tested by: Igor Sysoev <is <> rambler-co dot ru>, Vlad Galu <dudu <> dudu dot ro>
MFC after: 10 days
Add a drain function for struct sysctl_req, and use it for a variety
of handlers, some of which had to do awkward things to get a large
enough SBUF_FIXEDLEN buffer.
Note that some sysctl handlers were explicitly outputting a trailing
NUL byte. This behaviour was preserved, though it should not be
necessary.
Reviewed by: phk (original patch)
PCI-express capabilities. Non-PCI-express PCI devices may simply ignore
the upper bits in a config register address effectively aliasing the
device ID register to 0x100 rather than returning 0xFFFFFFFF. Previously
the code relied on these reads returning 0xFFFFFFFF.
MFC after: 3 days
