The default is to limit them to what the hardware is capable of.
Add sysctl twiddles for both the non-RTS and RTS protected aggregate
generation.
Whilst here, add some comments about stuff that I've discovered during
my exploration of the TX aggregate / delimiter setup path from the
reference driver.
- bear with me, there are lots of white space changes, I would not
do them, but I am a mere consumer of this stuff and if these drivers
are to stay in shape they need to be taken.
em driver changes: support for the new i217/i218 interfaces
igb driver changes:
- TX mq start has a quick turnaround to the stack
- Link/media handling improvement
- When link status changes happen the current flow control state
will now be displayed.
- A few white space/style changes.
lem driver changes:
- the shared code uncovered a bogus write to the RLPML register
(which does not exist in this hardware) in the vlan code,this
is removed.
CSUM_TCP too. They are all set explicitly by the kernel usually.
While here, fix an unrelated bug where hardware L4 checksum calculation
was accidentally disabled for some IPv6 packets.
Reported by: alfred@
MFC after: 3 days
- Remove unused #include.
- Do not cast away const.
- Use the canonical idiom to compare two numbers.
- Use proper type for sizes, i.e. size_t instead of int.
- Correct indentation.
- Simplify printf("\n") to puts("").
- Use return instead of exit() in main().
Submitted by: Christoph Mallon, christoph.mallon at gmx.de
Approved by: gjb (mentor)
Reviewed by: stefanf
MFC after: 1 week
process that has crashed.
sys/cddl/contrib/opensolaris/uts/common/dtrace/fasttrap.c:
In fasttrap_pid_disable(), we cannot PHOLD the proc
structure for a process that no longer exists, but
we still have other, fasttrap specific, state that
must be cleaned up for probes that existed in the
dead process. Instead of returning early if the
process related to our probes isn't found,
conditionalize the locking and carry on with a NULL
proc pointer. The rest of the fasttrap code already
understands that a NULL proc is possible and does
the right things in this case.
Sponsored by: Spectra Logic Corporation
Reviewed by: rpaulo, gnn
MFC after: 1 week
kernel. Properly restore, continue, and detach from processes
being DTraced when DTrace exits with an error so the program
being inspected is not terminated.
cddl/contrib/opensolaris/cmd/dtrace/dtrace.c:
In fatal(), the generic error handler, close the DTrace
handle as is done in the "probe/script" error handler
dfatal(). fatal() can be invoked after DTrace attaches
to processes (e.g. a script specified by command line
argument can't be found) and closing the handle will
release them.
Submitted by: Spectra Logic Corporation
Reviewed by: rpaulo, gnn
machine/signal.h and machine/ucontext.h into common x86 includes,
copying from amd64 and merging with i386.
Kernel-only compat definitions are kept in the i386/include/sigframe.h
and i386/include/signal.h, to reduce amd64 kernel namespace pollution.
The amd64 compat uses its own definitions so far.
The _MACHINE_ELF_WANT_32BIT definition is to allow the
sys/boot/userboot/userboot/elf32_freebsd.c to use i386 ELF definitions
on the amd64 compile host. The same hack could be usefully abused by
other code too.
When initializing the fdt, query U-Boot as well.
With this change, it is now feasible to have U-Boot load
the FDT, ubldr will pull it from U-Boot and hand it to the
kernel.
- fix indentation
- put the operator at the end of the line for long statements
- remove spaces between the type and the variable in a cast
- remove excessive parentheses
Tested by: md5
This has reduced the number of TX delimiter and data underruns when
doing large UDP transfers (>100mbit).
This stops any HAL_INT_TXURN interrupts from occuring, which is a good
sign!
Obtained from: Qualcomm Atheros
* Delete this debugging print - I used it when debugging the initial
TX descriptor chaining code. It now works, so let's toss it.
It just confuses people if they enable TX descriptor debugging as they
get two slightly different versions of the same descriptor.
* Indenting.
part of ts_status. Thus:
* make sure we decode them from ts_flags, rather than ts_status;
* make sure we decode them regardless of whether there's an error or not.
This correctly exposes descriptor configuration errors, TX delimiter
underruns and TX data underruns.
qsort(3) can work together to sort an array of integers.
PR: docs/176197
Submitted by: Fernando, fapesteguia at opensistemas.com
Approved by: gjb (mentor)
MFC after: 1 week
If a stack mark is set while the current stack block is empty, the stack
block may move later on (because of realloc()) and the stack mark needs to
be updated. This updating does not happen after popstackmark() has been
called; therefore, call setstackmark() again if the stack mark is still
being used.
For some reason, this only affects a few users. I cannot reproduce it. The
situation seems quite rare as well because an empty stack block would
usually be freed (by popstackmark()) before execution reaches a
setstackmark() call.
PR: 175922
Tested by: KT Sin
Thanks to Mike Belopuhov for the pointer to the OpenBSD patch, though
OpenBSD's gcc is very different that it only helped w/ where to modify,
not how... Thanks to jhb for some early reviews...
Reviewed by: imp, kib
MFC after: 1 month
seems to cause more problems then previous behavior: it either breaks
initilization sequence in other places or uncovers problems with
high-speed mode timing for SDHCI 3.0
Make dcons input polling adaptive, reducing poll rate to 1Hz after several
minutes of inactivty to reduce global interrupt rate. Most of users never
used FireWire debugging, so it is not very useful to consume power by it.
