establishing connection.
This is a workaround for Chelsio TOE driver, that does not update socket
buffer size in hardware after connection established, and unless that is
done beforehand, kernel code will stuck, attempting to send/receive full
PDU at once.
MFC after: 1 week
usr.bin/locate:
usr.bin/locate/locate/util.c:249:29: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
MAXPATHLEN, abs(i) < abs(htonl(i)) ? i : htonl(i));
^
usr.bin/locate/locate/util.c:249:29: note: remove the call to 'abs' since unsigned values cannot be negative
MAXPATHLEN, abs(i) < abs(htonl(i)) ? i : htonl(i));
^~~
usr.bin/locate/locate/util.c:274:32: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
MAXPATHLEN, abs(word) < abs(htonl(word)) ? word :
^
usr.bin/locate/locate/util.c:274:32: note: remove the call to 'abs' since unsigned values cannot be negative
MAXPATHLEN, abs(word) < abs(htonl(word)) ? word :
^~~
The problem is that ntohl() always returns an unsigned quantity. In
this case, it's expected to be cast back to a signed integer, but to
stop complaints about abs() we just store it into an integer, and don't
call ntohl() again.
Reviewed by: ngie
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1196
usr.bin/cpio on amd64 (or any arch with 64-bit time_t):
contrib/libarchive/cpio/cpio.c:1143:6: error: absolute value function 'abs' given an argument of type 'long' but has parameter of type 'int' which may cause truncation of value [-Werror,-Wabsolute-value]
if (abs(mtime - now) > (365/2)*86400)
^
contrib/libarchive/cpio/cpio.c:1143:6: note: use function 'labs' instead
if (abs(mtime - now) > (365/2)*86400)
^~~
labs
1 error generated.
This is because time_t is a long on amd64. To avoid the warning, just
copy the equivalent test from a few lines before, which is used in the
Windows case, and which is type safe.
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D1198
I've missed that iscsi_outstanding_remove() frees the second pointer,
so it should no longer be used. And in fact we don't really need to.
MFC after: 2 weeks
During heavy reads data copying in icl_pdu_get_data() may consume large
percent of CPU time. Moving it out of the lock significantly reduces
lock hold time and respectively lock congestion on read operations.
MFC after: 2 weeks
the first cacheline if the buffer start address is not on a cacheline
boundary. Normally a buffer which is not cacheline-aligned is bounced,
but a special rule applies for mbufs, which are always misaligned due to
the header. We know the cpu will not write to the header while dma is in
progress (so we've been told anyway), but it may have written to the
header shortly before starting a read, so we need to flush that write out
to memory before invalidating the whole buffer.
In collaboration with Mical Meloun and Svata Kraus.
mandoc(1) does not provide an equivalent of the GNU groff's soelim(1) as an
external binary. It does provide the funcitonnality but internally.
Lots if manpages in ports uses ".so" directives to include the content of
another manpage, which works properly if the manpages are not compressed.
With compressed manpages it will fail. So we need to preprocess those manpages
with soelim(1) before compressing them.
soeliminate(1) add the minimum functionnality from soelim(1) required for that
task, in order to still be able to prepare properly those manpages in case we
ship the base system only with mandoc as a manpage renderer.
soeliminate(1) accept all the arguments from soelim(1) for compatibility but
only '-I dir' is really functionnal.
Name it soeliminate and not soelim, so groff from base or ports can still call
soelim(1) for its internal use and avoid potential incompatibilities
MFC after: 1 month
rename it to ufs_dirhashreclaimpercent, as suggested
by jhb@. As an added bonus this avoids divide-by-zero
errors.
Requested by: jhb, markj
Reviewied by: jhb, markj
commit 6d3c4c09226ad6bdd662e3e52489ef294a6ce298
Add terasic_mtl vt(4) framebuffer driver
terasic_mtl can be built with syscons(4) and vt(4) attachments, selected
at compile time.
commit 33240259b47a7c990a5a88a19f133a5600432a4c
Clear terasic_mtl text buffer on attach
commit d188c2d2412953f949624aa35cd07082830943c9
Update terasic vt(4) driver for FreeBSD r269783
commit d1cc54eee852fa4fc9d359d5bb2171d24ec73369
Safety belt to ensure vt(4) fb parameters are correct
commit 76e6d468ef45711d7952786095fc4791289ebb4b
Improve terasic_mtl_vt fdt parsing
- Use OF_getencprop to avoid need for explicit endian handling
(submitted by ray@freebsd.org)
- Check for expected length and correct pointer type
commit 3e2524b8995ab66e8a9295e4c87cbc7126eeddf4
Correct device_printf usage
commit 9e53e3c8e0766414e25662c95b09cc51c92443b0
Switch framebuffer to match host endianness
Xorg and xf86-video-scfb work much better with a native-endian
framebuffer.
commit 0f49259d596321ed85288ac0e1fb4ee1c966df48
Switch DE4 to vt(4) and enable kbdmux
commit 5bc96ebc89db7d134ad478335090c8477c1677c7
Add missing \n in device_printf calls
Submitted by: emaste
Sponsored by: DARPA, AFRL
commit d0c7d235c09fc65dbdb278e7016a96f79c6a49cc
Make the Altera JTAG UART device driver slightly more forgiving of
the foibles of a sub-par hrdware interface by increasing the timeout
for spotting JTAG polling from one to two seconds.
commit 19ed45a18832560dab967c179d83b71081c3a220
Update comment.
commit 8edfe803f033cc8e33229f99894c2b7496a44d5f
Add a comment about a device-driver race condition that could cause the BERI
pipeline to wedge awaiting JTAG in the event that both the low-level console
and the tty layer decide to write to the JTAG FIFO just before JTAG is
disconnected. Resolving this race is a bit tricky as it looks like there
isn't a way to 'give the character back' to the tty layer when we discover
the race. The easy fix is to drop the character, which we don't yet do, but
perhaps should as that is a better outcome than wedging the pipeline.
commit 2ea26cf579c9defcf31e413e7c9b0fbc159237fc
Add a comment about an inherent race with hardware in the Altera JTAG
UART's low-level console code.
Submitted by: rwatson
MFC after: 1 week
Sponsored by: DARPA, AFRL
Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert negative values of ticks to '1'. For unsigned integer overflow we
will get sufficiently smaller timeout values than expected.
Switch from callout_reset, which requires conversion to int based ticks
to callout_reset_sbt to avoid this.
Also correct isci to correctly resolve ccb timeout.
This was based on the original work done by Eygene Ryabinkin
<rea@freebsd.org> back in 5 Aug 2011 which used a macro to help avoid
the overlow.
Differential Revision: https://reviews.freebsd.org/D1157
Reviewed by: mav, davide
MFC after: 1 month
Sponsored by: Multiplay
- Dump an NT_X86_XSTATE note if XSAVE is in use. This note is designed
to match what Linux does in that 1) it dumps the entire XSAVE area
including the fxsave state, and 2) it stashes a copy of the current
xsave mask in the unused padding between the fxsave state and the
xstate header at the same location used by Linux.
- Teach readelf() to recognize NT_X86_XSTATE notes.
- Change PT_GET/SETXSTATE to take the entire XSAVE state instead of
only the extra portion. This avoids having to always make two
ptrace() calls to get or set the full XSAVE state.
- Add a PT_GET_XSTATE_INFO which returns the length of the current
XSTATE save area (so the size of the buffer needed for PT_GETXSTATE)
and the current XSAVE mask (%xcr0).
Differential Revision: https://reviews.freebsd.org/D1193
Reviewed by: kib
MFC after: 2 weeks
This change saves/restores the callee-saved MIPS floating point
registers as documented by the o32/n32/n64 spec ("MIPSpro N32
ABI Handbook", Table 2-1) for the _setjmp(3), _longjmp(3),
setjmp(3) and longjmp(3) C library functions. This is only
included when the C library is built with hardware floating point
support (or when "SOFTFLOAT" is not defined).
Submitted by: sson
MFC after: 1 month
Sponsored by: DARPA, AFRL
directories in LOCAL_LIB_DIRS if they are subdirectories of directories
listed in LOCAL_DIRS. This allows a hierarchy like:
foo
foo/lib
foo/usr.bin
foo/usr.sbin
to be supported with LOCAL_DIRS=foo LOCAL_DIRS=foo/lib.
MFC after: 1 week
Sponsored by: DARPA, AFRL
Previous order confused initiators with messages about "removed" LUNs
during simple ctld restart without any real config change. After this
commit initiators only reestablish lost connection, receive "Power on
occurred" UNIT ATTENTION status and continue normal operation.
MFC after: 1 month
chroots all over the place, so there is bound to be a stale file lying
around in there (in my case samba lock files from creating accounts). If
we don't do that, the symlink later will fail.
for reasons yet unknown; don't make it increment cumulated_error as a kind
of temporary workaround.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
In this mode one head is in Active state, supporting all commands, while
another is in Standby state, supporting only minimal LUN discovery subset.
It is still incomplete since Standby state requires reservation support,
which is impossible to do right without having interlink between heads.
But it allows to run some basic experiments.
made getmntinfo() return empty flags for smbfs filesystems when
called with MNT_WAIT. It's not visible with mount(8), since it uses
MNT_NOWAIT, but broke autounmount(8) operation.
PR: 195161
Differential Revision: https://reviews.freebsd.org/D1194
Reviewed by: kib@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
related cleanups:
- Require each driver to initalize a mutex in the scsi_low_softc that
is shared with the scsi_low code. This mutex is used for CAM SIMs,
timers, and interrupt handlers.
- Replace the osdep function switch with direct calls to the relevant
CAM functions and direct manipulation of timers via callout(9).
- Collapse the CAM-specific scsi_low_osdep_interface substructure
directly into scsi_low_softc.
- Use bus_*() instead of bus_space_*().
- Return BUS_PROBE_DEFAULT from probe routines instead of 0.
- No need to zero softcs.
- Pass 0ul and ~0ul instead of 0 and ~0 to bus_alloc_resource().
- Spell "dettach" as "detach".
- Remove unused 'dvname' variables.
- De-spl().
Tested by: no one
- Add a per-softc mutex as a driver lock.
- Use callout(9) instead of timeout(9).
- Set softc pointer in si_drv1 of cdev instead of looking softc
up via devclass in cdev methods.
Tested by: no one
- Don't recurse driver mutex.
- Don't hold driver mutex across fubyte/subyte.
- Replace fubyte/subyte loops with copyin/copyout calls.
- Use relatively sane locking in wl_ioctl().
- Use bus space accessors instead of in*()/out*().
- Use callout(9) instead of timeout(9).
- Stop watchdog timer in detach and don't hold mutex across
bus_teardown_intr().
- Use device_printf() and if_printf().
- De-spl().
Tested by: no one
