This function will call the regnode_check_voltage method for a given regulator
and check if the desired voltage in reachable by it.
Also adds a default method that check the std_param and which should be enough
for most regulators and add it as the method for axp* rk805 and fixed regulators.
Reviewed by: mmel
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22260
Some userland libraries incude machine/pcb.h and this needs the full
definition of struct debug_monitor_state. To allow this to work move
stuct debug_monitor_state out of the _KERNEL guard.
Sponsored by: DARPA, AFRL
switching. The indirect costs being unnecessary TLB misses that are
incurred when ASIDs are not used. In fact, currently, when we perform a
context switch on one processor, we issue a broadcast TLB invalidation that
flushes the TLB contents on every processor.
Mark all user-space ("ttbr0") page table entries with the non-global flag so
that they are cached in the TLB under their ASID.
Correct an error in pmap_pinit0(). The pointer to the root of the page
table was being initialized to the root of the kernel-space page table
rather than a user-space page table. However, the root of the page table
that was being cached in process 0's md_l0addr field correctly pointed to a
user-space page table. As long as ASIDs weren't being used, this was
harmless, except that it led to some unnecessary page table switches in
pmap_switch(). Specifically, other kernel processes besides process 0 would
have their md_l0addr field set to the root of the kernel-space page table,
and so pmap_switch() would actually change page tables when switching
between process 0 and other kernel processes.
Implement a workaround for Cavium erratum 27456 affecting ThunderX machines.
(I would like to thank andrew@ for providing the code to detect the affected
machines.)
Address integer overflow in the definition of TCR_ASID_16.
Setup TCR according to the PARange and ASIDBits fields from
ID_AA64MMFR0_EL1. Previously, TCR_ASID_16 was unconditionally set.
Modify build_l1_block_pagetable so that lower attributes, such as ATTR_nG,
can be specified as a parameter.
Eliminate some unused code.
Earlier versions were tested to varying degrees by: andrew, emaste, markj
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D21922
Implement get/fill_dbregs on arm64. This is used by ptrace with the
PT_GETDBREGS and PT_SETDBREGS requests. It allows userspace to set hardware
breakpoints.
The struct dbreg is based on Linux to ease adding hardware breakpoint
support to debuggers.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22195
Altough in the comment above the pmap_change_attr() it was mentioned
that VA could be in KV or DMAP memory space. However,
pmap_change_attr_locked() was accepting only the values inside the DMAP
memory range.
To fix that, the condition check was changed so also the va inside the
KV memory range would be accepted.
The sample use case that wasn't supported is the PCI Device that has the
BAR which should me mapped with the Write Combine attribute - for
example BAR2 of the ENA network controller on the A1 instances on AWS.
Tested on A1 AWS instance and changed ENA BAR2 mapped resource to be
write-combined memory region.
Differential Revision: https://reviews.freebsd.org/D22055
MFC after: 2 weeks
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Arm64 allows us to create execute only mappings. To make sure userspace is
unable to accidentally execute kernel code set the user execute never
bit in the kernel page tables.
MFC after: 1 week
Sponsored by: DARPA, AFRL
Summary:
ARM64 currently treats all data abort exceptions as page faults. This
can cause infinite loops on non-page fault faults, such as alignment faults.
Since kernel-side alignment faults should be avoided, this adds support directly
to the el0 fault handler, instead of the data_abort() handler.
Test Plan: Tested on rpi3, with a misaligned ldm test.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D22133
We may want to mask exceptions when in userspace. This was previously
impossible as threads are created with all exceptions unmasked and
signals expected userspace to mask any. Fix these by copying the
mask state on thread creation and allow exceptions to be masked on
signal return, as long as they don't change.
Sponsored by: DARPA, AFRL
To allow consistent values to be used in both the kernel and userspace
create a function for these to be read from the kernel. They use a newly
created macro with the name of the ID register to read. For now there is
redundant information in the user_regs array as it still holds the CRm and
Op2 values, however this will be fixed in a later change.
This will be used by ptrace to allow hardware breakpoints in userspace.
Sponsored by: DARPA, AFRL
These instructions are used to access the registers described in armreg.h,
and will be used in a future change to create a per-register identification
macro.
Sponsored by: DARPA, AFRL
The debug monitor register state is now stored in a struct and updated
when required. Currently there is only a kernel state, however a
per-process state will be added in a future change.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22128
Previously we would call data_abort on all data and instruction aborts
however this is incorrect for most abort types. Move to use an array
of function pointers to allow for more handlers to be easily added.
Reviewed by: jhibbits
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22170
Because of the previous naming scheme the old ID_AA64PFR0_EL1 macro
collided with a potential macro for the register of the same name. To fix
this collision rename these macros.
Sponsored by: DARPA, AFRL
Declare retry in the function scope.
Rename it to retry as there is a timeout function which was
causing to code to compile.
Reported by: jhibbits
MFC after: 1 month
X-MFC-WITH: r354089
The RK805 regs array was being allocated before it's required size was
known, causing the driver to use memory it didn't own. That memory
was subsequently allocated and used elsewhere causing later fatal data
aborts in rk805_map().
Whilst I'm here, add a sanity check to catch unsupported PMICs (this
shouldn't ever get hit because the probe should have failed).
Reviewed by: manu
MFC after: 1 week
Sponsored by: Google
This is a driver for the USB3 PHY present in the RK3399.
While the phy support DP (Display Port) the driver doesn't has we have
no driver to test this with for now.
All the lane and pll configuration is just magic values from rockchip.
While the manual have some info on those registers it's really hard to
understand how to calculate those values (if there is a way).
MFC after: 1 month
As with amd64 NUMA is required for reasonable operation on big-iron
arm64 systems and is expected to have no significant impact on small
systems. Enable it now for wider testing in advance of FreeBSD 13.0.
You can use the 'vm.ndomains' sysctl to see if multiple domains are in
use - for example (from Cavium/Marvell ThunderX2):
# sysctl vm.ndomains
vm.ndomains: 2
No objection: manu
Sponsored by: The FreeBSD Foundation
When we raise a data abort from the kernel we need to enable interrupts,
however we shouldn't be doing this when in the kernel debugger. In this
case interrupts can lead to a further panic as they don't expect to be
run from such a context.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
in simple multifunction driver.
- follow interrupt changes in DT. Split old ICU driver to function oriented
parts and add drivers for newly defined parts (system error interrupts).
- Many drivers are children of simple multifunction driver. But after r349596
simple MF driver doesn't longer exports memory resources, and all children
must use syscon interface to access their registers. Adapt affected
drivers to this fact.
MFC after: 3 weeks
Move futex_mtx to linux_common.ko for amd64 and aarch64 along
with respective list/mutex init/destroy.
PR: 240989
Reported by: Alex S <iwtcex@gmail.com>
Debugnet is a simplistic and specialized panic- or debug-time reliable
datagram transport. It can drive a single connection at a time and is
currently unidirectional (debug/panic machine transmit to remote server
only).
It is mostly a verbatim code lift from netdump(4). Netdump(4) remains
the only consumer (until the rest of this patch series lands).
The INET-specific logic has been extracted somewhat more thoroughly than
previously in netdump(4), into debugnet_inet.c. UDP-layer logic and up, as
much as possible as is protocol-independent, remains in debugnet.c. The
separation is not perfect and future improvement is welcome. Supporting
INET6 is a long-term goal.
Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to
'debugnet_' or 'dn_' -- sorry. I thought keeping the netdump name on the
generic module would be more confusing than the refactoring.
The only functional change here is the mbuf allocation / tracking. Instead
of initiating solely on netdump-configured interface(s) at dumpon(8)
configuration time, we watch for any debugnet-enabled NIC for link
activation and query it for mbuf parameters at that time. If they exceed
the existing high-water mark allocation, we re-allocate and track the new
high-water mark. Otherwise, we leave the pre-panic mbuf allocation alone.
In a future patch in this series, this will allow initiating netdump from
panic ddb(4) without pre-panic configuration.
No other functional change intended.
Reviewed by: markj (earlier version)
Some discussion with: emaste, jhb
Objection from: marius
Differential Revision: https://reviews.freebsd.org/D21421
After r352110 the page lock no longer protects a page's identity, so
there is no purpose in locking the page in pmap_mincore(). Instead,
if vm.mincore_mapped is set to the non-default value of 0, re-lookup
the page after acquiring its object lock, which holds the page's
identity stable.
The change removes the last callers of vm_page_pa_tryrelock(), so
remove it.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21823
Arm updates these with each new architecture revision. To help keep them
updated use a collection of tables to hold the needed information to
decode these registers.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22020
callers hold it.
This simplifies pmap code and removes a dependency on the object lock.
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21596
busy acquires while held.
This allows code that would need to acquire and release a very large number
of page busy locks to use the old mechanism where busy is only checked and
not held. This comes at the cost of false positives but never false
negatives which the single consumer, vm_fault_soft_fast(), handles.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D21592
This adds support for H6 SoC.
Add a CCU driver for H6 that support all PLLs and most of the clocks
that we are intersted in for now (i2c, mmc, usb, etc ...)
MFC after: 1 month
Summary: Add trivial 32-bit arm cores on aarch64 support for gcore. This
doesn't handle fpregs.
Reviewed by: #arm, andrew
Sponsored by: Juniper Networks, Inc
Differential Revision: https://reviews.freebsd.org/D21947
We only support host mode so those functions are just added so
we won't panic when generic-{e,o}hci will set the phy to host mode.
MFC after: 1 month
X-MFC-With: r353062
work. More precisely, it doesn't set ATTR_AP(ATTR_AP_USER) in the page
table entry, so any attempt to read from the mapped page by user space
generates a page fault. This problem has gone unnoticed because the page
fault handler, vm_fault(), will ultimately call pmap_enter(), which
replaces the non-working page table entry with one that has
ATTR_AP(ATTR_AP_USER) set.
This change reduces the number of page faults during a "buildworld" by
about 19.4%.
Reviewed by: andrew, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21841
