Recent testing of the NFS-over-TLS code found a LOR between the mutex lock
used for sessions and the sleep lock used for server side krpc socket
structures.
The code in nfsrv_checksequence() would call SVC_RELEASE() with the mutex
held. Normally this is ok, since all that happens is SVC_RELEASE()
decrements a reference count. However, if the socket has just been shut
down, SVC_RELEASE() drops the reference count to 0 and acquires a sleep
lock during destruction of the server side krpc structure.
This patch fixes the problem by moving the SVC_RELEASE() call in
nfsrv_checksequence() down a few lines to below where the mutex is released.
MFC after: 1 week
Or it could be explained as lockless (for vnode lock) reads. Reads
are performed from the node tn_obj object. Tmpfs regular vnode object
lifecycle is significantly different from the normal OBJT_VNODE: it is
alive as far as ref_count > 0.
Ensure liveness of the tmpfs VREG node and consequently v_object
inside VOP_READ_PGCACHE by referencing tmpfs node in tmpfs_open().
Provide custom tmpfs fo_close() method on file, to ensure that close
is paired with open.
Add tmpfs VOP_READ_PGCACHE that takes advantage of all tmpfs quirks.
It is quite cheap in code size sense to support page-ins for read for
tmpfs even if we do not own tmpfs vnode lock. Also, we can handle
holes in tmpfs node without additional efforts, and do not have
limitation of the transfer size.
Reviewed by: markj
Discussed with and benchmarked by: mjg (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26346
Avoid tmpfs mount and node locks when ref count is greater than zero,
which is the case until node is being destroyed by unlink or unmount.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26346
There are several negative side-effects of not calling into VOP layer
at all for page cache reads. The biggest is the missed activation of
EVFILT_READ knotes.
Also, it allows filesystem to make more fine grained decision to
refuse read from page cache.
Keep VIRF_PGREAD flag around, it is still useful for nullfs, and for
asserts.
Reviewed by: markj
Tested by: pho
Discussed with: mjg
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26346
The pointer to vnode is already stored into f_vnode, so f_data can be
reused. Fix all found users of f_data for DTYPE_VNODE.
Provide finit_vnode() helper to initialize file of DTYPE_VNODE type.
Reviewed by: markj (previous version)
Discussed with: freqlabs (openzfs chunk)
Tested by: pho (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26346
From Franco:
The iflib rewrite forced the promisc flag but it was not reported
to the system. Noticed on a stock VM that went into unsolicited
promisc mode when dhclient was started during bootup.
PR: 248869
Submitted by: Franco Fichtner <franco@opnsense.org>
Reviewed by: erj@
MFC after: 3 days
This re-adds the opt_rss.h header to the driver and includes some
RSS-specific headers when RSS is defined.
PR: 249191
Submitted by: Milosz Kaniewski <milosz.kaniewski@gmail.com>
MFC after: 3 days
Due to a check that should have been an endian check being an #if 0,
the wrong checksum mask table was being used on LE, which was causing
extreme strangeness in DNS resolution -- *some* hosts would be resolvable,
but most would not.
This fixes DNS resolution.
(I am committing some parts of the LE patchset ahead of time to reduce the
amount of work I have to do while committing the main patchset.)
Sponsored by: Tag1 Consulting, Inc.
Intercept and report #UD to VM on SVM/AMD in case VM tried to execute an
SVM instruction. Otherwise, SVM allows execution of them, and instructions
operate on host physical addresses despite being executed in guest mode.
Reported by: Maxime Villard <max@m00nbsd.net>
admbug: 972
CVE: CVE-2020-7467
Reviewed by: grehan, markj
Differential revision: https://reviews.freebsd.org/D26313
This function wasn't converted to use the new locking protocol in
r333744. Make it use the PCB lock for synchronizing connection state.
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26300
unp_pcb_owned_lock2() has some sharp edges and forces callers to deal
with a bunch of cases. Simplify it:
- Rename to unp_pcb_lock_peer().
- Return the connected peer instead of forcing callers to load it
beforehand.
- Handle self-connected sockets.
- In unp_connectat(), just lock the accept socket directly. It should
not be possible for the nascent socket to participate in any other
lock orders.
- Get rid of connect_internal(). It does not provide any useful
checking anymore.
- Block in unp_connectat() when a different thread is concurrently
attempting to lock both sides of a connection. This provides simpler
semantics for callers of unp_pcb_lock_peer().
- Make unp_connectat() return EISCONN if the socket is already
connected. This fixes a race[1] when multiple threads attempt to
connect() to different addresses using the same datagram socket.
Upper layers will disconnect a connected datagram socket before
calling the protocol connect's method, but there is no synchronization
between this and protocol-layer code.
Reported by: syzkaller [1]
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26299
The allocated memory is only required for SOCK_STREAM and SOCK_SEQPACKET
sockets.
Reviewed by: kevans
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26298
In all cases, PCBs are unlocked after unp_disconnect() returns. Since
unp_disconnect() may release the last PCB reference, callers may have to
bump the refcount before the call just so that they can release them
again.
Change unp_disconnect() to release PCB locks as well as connection
references; this lets us remove several refcount manipulations. Tighten
assertions.
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26297
unp_pcb_lock_pair() seems like a better name. Also make it handle the
case where the two sockets are the same instead of making callers do it.
No functional change intended.
Reviewed by: glebius, kevans, kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26296
- Use refcount_init().
- Define an INVARIANTS-only zone destructor to assert that various
bits of PCB state aren't left dangling.
- Annotate unp_pcb_rele() with __result_use_check.
- Simplify control flow.
Reviewed by: glebius, kevans, kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26295
- Define a locking key for unpcb members.
- Rewrite some of the locking protocol description to make it less
verbose and avoid referencing some subroutines which will be renamed.
- Reorder includes.
Reviewed by: glebius, kevans, kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26294
The first issue was lack of quoting around INSTALLFLAGS, which set it
incorrectly and produced an error on -M.
The second issue was that we weren't actually doing the install in
unprivileged mode, making it effectively useless. This was designed to pass
through the proper metalog/unpriv flags to install(1), so just let it
happen.
MFC after: 3 days
(default: WITH_GH_BC) and 12-STABLE (default: WITHOUT_GH_BC).
Since the new implementation of bc and dc is optionally available in
12-STABLE, I intend to MFC these descriptions for inclusion in 12.2.
MFC after: 3 days
It's included by header pollution in most of the compile
environments. However, in the standalone envirnment, it's not
included. Go ahead and include it always since the overhead is low and
it is simpler that way.
MFC After: 3 days
- Exit with an error if no path is specified.
- Man page typo.
- Error message typo.
Reviewed by: kib
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26376
In D12421, the ability to compile stand/ in little-endian was added, with the
intention to extend loader.kboot to run in Petitboot.
However, no further work was done, as the kernel then gained self-execution
capabilities as Petitboot was taught to load FreeBSD kernels directly.
The FreeBSD installer on powerpc64 (on POWER8 and POWER9) uses
/boot/etc/kboot.conf instead of loader.
As this option does nothing but cause stand/ to be miscompiled and actively
causes confusion, remove it.
(I have a functioning petitboot loader in my local tree, however, it turned
out to be quite inconvient to use due to the current petitboot plugin design
so I put it on hold.)
Reviewed by: emaste, imp, jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26430
When we bring in geli into the boot loader, we are single threaded so
we don't have to worry about locking. We have no mutexes, and don't need
to use them, so comment it out.
MFC After: 3 days
We don't need to do the busy dance for this driver. It's handled by
destroy_dev() entirely. Since all we did was busy/unbusy in
open/close, just delete them. We therefore don't need to track closes
either.
Reviewed by: ian@
Differential Revision: https://reviews.freebsd.org/D26431
in stand.h typically, but when this is included we can define it
multiple times. However, we don't define bool in stand.h at the
moment, so allow it to be defined inside types.h when we're building
for the standalone environment.
MFC After: 3 days
vendor ID string to say just "Microchip Technology" -- the buyout of
Standard Microsystems happened in 2012 and the SMC/SMSC names are pretty
much retired at this point.
PR: 241406
* Remove identical or almost identical headers
* Only build aout.c on amd64 and i386. None of the the other current
architectures ever supported running a.out binaries
* Enable on all architectures
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26369
Use MACHINE_CPUARCH with arm64 (aarch64) when we build code that could run
on any 64-bit Arm instruction set. This will simplify checks in downstream
consumers targeting prototype instruction sets.
The only place we check for MACHINE_ARCH == aarch64 is when building the
device tree blobs. As these are targeting current generation ISAs.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26370
Currently, the only thing that prevents a functioning 64-bit FICL build is
a few integer types that were intended to be fixed-width.
Changing them to C99 integer types allows building a functioning 64-bit
FICL.
While this isn't applicable to the default settings of any in-tree loaders,
it is necessary for a future Petitboot loader, due to the requirement that
it be compiled as a 64-bit program.
Reviewed by: tsoome, imp (earlier revision)
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26364
On ibm,extended-clock-frequency, ensure we be64toh() the value.
On clock-frequency, remove the right-shifting hack (which was needed due to
reading a 32 bit value into a 64 bit variable) and switch to OF_getencprop()
for reading (which will handle endian conversion internally.)
Reviewed by: jhibbits (in irc)
Sponsored by: Tag1 Consulting, Inc.
There are a couple of places in the tree that directly parse the newvers.sh
script looking for the BRANCH variable. I found two locations, one in
release/Makefile and the other in bin/freebsd-version/Makefile.
While there is a good argument that BRANCH_OVERRIDE should properly
propagate in those circumstances and the new behavior is thus better, the
reality is this change broke freebsd-update's ability to find timestamps in
binaries and resulted in a large number of gratuitous changes.
Reported by: freebsd-update
Discussed with: cperciva
MFC after: 1 day
for it to sit in the syscall fast path.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26368
Add enough infrastructure for interrupts on children of the pl061 GPIO
controller. As gpiobus already provided these the pl061 driver also needs
to pass requests up the newbus hierarchy.
Currently there are no children that expect to configure interrupts, however
this is expected to change to support the ACPI Event Information interface.
Sponsored by: Innovate UK
I have been trying to reduce the time that testsuite runs take for CheriBSD
on QEMU (currently about 22 hours). One of the slowest tests is pfctl_test:
Just listing the available test cases currently takes 98 seconds on a
CheriBSD RISC-V system due to all the processes being spawned. This trivial
patch reduces the time to 92 seconds. The better solution would be to
rewrite the test in C/C++ which I may do as a follow-up change.
Reviewed By: kp
Differential Revision: https://reviews.freebsd.org/D26417
that can be extended, but also ensure compile-time type checking. Refactor
common code out of arch-specific implementations. Move the mpr and mps
drivers to this new API. The template type remains visible to the consumer
so that it can be allocated on the stack, but should be considered opaque.
