At this point we have not rendezvous'ed with the mirror worker thread, and
I/O may still be in flight. Various I/O completion paths expect to be able
to obtain a reference to the mirror softc from the GEOM, so setting it to
NULL may result in various NULL pointer dereferences if the mirror is
stopped with -f or the kernel is shut down while a mirror is
synchronizing. The worker thread will clear the softc pointer before
exiting.
Tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
We are otherwise susceptible to a race with a concurrent teardown of the
mirror provider, causing the I/O to be left uncompleted after the mirror
started withering.
Tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
mode.
Direct mode always supported widths up to 32, except for its hard-coded
16s matching the pixmap size. Text mode is still limited to 9 its 2x2
character cell method and missing adjustments for the gap between
characters, if any.
Cursor heights can be almost anything in graphics modes.
Regular I/O requests may be blocked by concurrent synchronization requests
targeted to the same LBAs, in which case they are moved to a holding queue
until the conflicting I/O completes. We therefore want to stop
synchronization before completing pending I/O in g_mirror_destroy_provider()
since this ensures that blocked I/O requests are completed as well.
Tested by: pho
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
While the former name is easier to read, the "_flags" suffix has a special
meaning for loader(8) and, thus, it was impossible to set the knob via
loader.conf(5). The loader interpreted the setting as flags that should
be passed to a kernel module named "vfs.zfs.debug".
Discussed with: smh
MFC after: 2 weeks
much as possible, by avoiding null ANDs and ORs to the frame buffer.
Mouse cursors are fairly sparse, especially for their frame. Pixels
are written in groups of 8 in planar mode and the per-group sparseness
is not as large, but it still averages about 40% with the current
9x13 mouse cursor. The average drawing time is reduced by about this
amount (from 22 usec constant to 12.5 usec average on Haswell).
This optimization is relatively larger with larger cursors. Width 10
requires 6 frame buffer accesses per line instead of 4 if not done
sparsely, but rarely more than 4 if done sparsely.
The "cred" argument of ncl_flush() is unused and it was confusing to have
the code passing in NULL for this argument in some cases. This patch deletes
this argument.
There is no semantic change because of this patch.
MFC after: 2 weeks
mode.
Don't manually unroll the 2 inner loops. On Haswell, doing so gave a
speedup of about 0.5% (about 4 cycles per iteration out of 1400), but
hard-coded a limit of width 9 and made better better optimizations
harder to see. gcc-4.2.1 -O does the unrolling anyway, unless tricked
with a volatile hack. gcc's unrolling is not very good and gives a
a speedup of about half as much (about 2 cycles per iteration). (All
timing on i386.)
Manual unrolling was only feasible because the inner loop only iterates
once or twice. Usually twice, but a dynamic check is needed to decide,
and was not moved from the second-innermost loop manually or by gcc.
This commit basically adds another dynamic check in the inner loop.
Cursor widths of 10-17 require 3 iterations in the inner loop and this
is not so easy to unroll -- even gcc stops at 2.
The 'pktid' variable is modified while being used twice between
sequence points, probably due to htonl() is macro.
Reported by: PVS-Studio
MFC after: 1 week
to pass rule number and rule set to userland. In r272840 the kernel
internal rule representation was changed and the rulenum field of
struct ip_fw_rule got the type uint32_t, but userlevel representation
still have the type uint16_t. To not overflow the size of pointer
on the systems with 32-bit pointer size use separate variable to
copy rulenum and set.
Reported by: PVS-Studio
MFC after: 1 week
do for streaming sockets.
And do more cleanup in the sbappendaddr_locked_internal() to prevent
leak information from existing mbuf to the one, that will be possible
created later by netgraph.
Suggested by: glebius
Tested by: Irina Liakh <spell at itl ua>
MFC after: 1 week
ipfilter man pages. This also currently restricts keep frags to only when
keep state is used, which is redundant because keep state currently
assumes keep frags. This commit fixes this.
To the user this change means that to maintain the current behaviour
one must add keep frags to any ipfilter keep state rule (as documented
in the man pages).
This patch also allows the flexability to specify and use keep frags
separate from keep state, as documented in an example in ipf.conf.5,
instead of the currently broken behaviour.
Relnotes: yes
Memory is malloc'd, then a search for a match in the fragment table
is made and if the fragment matches, the wrong fragment table is
freed, causing a use after free panic. This commit fixes this.
A symptom of the problem is a kernel page fault in bcopy() called by
ipf_frag_lookup() at line 715 in ip_frag.c. Another symptom is a
kernel page fault in ipf_frag_delete() when called by ipf_frag_expire()
via ipf_slowtimer().
MFC after: 1 week
TXP_CMD_WAIT argument allocates a response buffer. If the allocation
fails, txp_ext_command() returns an error and it's handed in caller.
Found by: PVS-Studio
Some NFSv4.1 servers such as AmazonEFS can only support a small fixed number
of open_owner4s. This patch adds a mount option called "oneopenown" that
can be used for NFSv4.1 mounts to make the client do all Opens with the
same open_owner4 string. This option can only be used with NFSv4.1 and
may not work correctly when Delegations are is use.
Reported by: cperciva
Tested by: cperciva
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8988
A function called svcpool_close() was added to the server side krpc by
r313735, so that a pool could be closed without destroying the data structures.
This little patch adds a call to it for the callback pool (svcpool_nfscbd),
so that the nfscbd daemon can be killed/restarted and continue to work
correctly.
MFC after: 2 weeks
Some dummynet modules used strcpy() to copy from a larger buffer
(dn_aqm->name) to a smaller buffer (dn_extra_parms->name). It happens that
the lengths of the strings in the dn_aqm buffers were always hardcoded to be
smaller than the dn_extra_parms buffer ("CODEL", "PIE").
Use strlcpy() instead, to appease static checkers. No functional change.
Reported by: Coverity
CIDs: 1356163, 1356165
Sponsored by: Dell EMC Isilon
According to the C standard, it is invalid to copy beyond the end of an
object, even if that object is obviously a member of a larger object (a
struct, in this case).
Appease the standard and Coverity by refactoring the copy in a
straightforward way. No functional change.
Reported by: Coverity (CWE-120)
CIDs: 1007819, 1007820, 1007821, 1007822, 1009668, 1009669
Security: no (false positive detection)
Sponsored by: Dell EMC Isilon
When checksums of received IP and UDP header already checked, UDP uses
sbappendaddr_locked() to pass received data to the socket.
sbappendaddr_locked() uses given mbuf as is, and if NIC supports checksum
offloading, mbuf contains csum_data and csum_flags that were calculated
for already stripped headers. Some NICs support only limited checksums
offloading and do not use CSUM_PSEUDO_HDR flag, and csum_data contains
some value that UDP/TCP should use for pseudo header checksum calculation.
When L2TP is used for tunneling with mpd5, ng_ksocket receives mbuf with
filled csum_flags and csum_data, that were calculated for outer headers.
When L2TP header is stripped, a packet that was tunneled goes to the IP
layer and due to presence of csum_flags (without CSUM_PSEUDO_HDR) and
csum_data, the UDP/TCP checksum check fails for this packet.
Reported by: Irina Liakh <spell at itl ua>
Tested by: Irina Liakh <spell at itl ua>
MFC after: 1 week
Demotions preserve PG_NX, so it is enough to set nx bit for initial
lowest-level paging entries.
Suggested and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The arm64 binutils only accepts 0 as an offset to the Load-Acquire Register
instructions where llvm will acceps both 0 and 0x0. The thread switching
code uses these with SCHED_ULE to block waiting for a lock to be released.
As the offset of the data to be loaded is zero this is safe, however it is
useful to keep the offset in the instruction to document what is being
loaded.
To work around this issue in binutils only generate the 0x prefix for
non-zero values.
Reported by: kan
Sponsored by: DARPA, AFRL
We need to set the Execute-never bits when mapping device memory as the
hardware may perform speculative instruction fetches.
Set the Privileged Execute-ever bit on userspace memory to stop the kernel
if it is tricked into executing it.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10382
When opening a vdev whose path is unknown, vdev_geom must find a geom
provider with a label whose guids match the desired vdev. However, due to
partitioning, it is possible that two non-synonomous providers will share
some labels. For example, if the first partition starts at the beginning of
the drive, then ada0 and ada0p1 will share the first label. More troubling,
if the last partition runs to the end of the drive, then ada0p3 and ada0
will share the last label. If vdev_geom opens ada0 when it should've opened
ada0p3, then the pool won't be readable. If it opens ada0 when it should've
opened ada0p1, then it will corrupt some other partition when it writes the
3rd and 4th labels.
The easiest way to reproduce this problem is to install a mirrored root pool
with the default partition layout, then swap the positions of the two boot
drives and reboot. Whether the bug manifests depends on the order in which
geom lists its providers, which is arbitrary.
Fix this situation by modifying the search algorithm to prefer geom
providers that have all four labels intact. If no such provider exists, then
open whichever provider has the most.
Reviewed by: mav
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D10365
When the replay window size is large than UINT8_MAX, add to the request
the SADB_X_EXT_SA_REPLAY extension header that was added in r309144.
Also add support of SADB_X_EXT_NAT_T_TYPE, SADB_X_EXT_NAT_T_SPORT,
SADB_X_EXT_NAT_T_DPORT, SADB_X_EXT_NAT_T_OAI, SADB_X_EXT_NAT_T_OAR,
SADB_X_EXT_SA_REPLAY, SADB_X_EXT_NEW_ADDRESS_SRC, SADB_X_EXT_NEW_ADDRESS_DST
extension headers to the key_debug that is used by `setkey -x`.
Modify kdebug_sockaddr() to use inet_ntop() for IP addresses formatting.
And modify kdebug_sadb_x_policy() to show policy scope and priority.
Reviewed by: gnn, Emeric Poupon
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10375
from the kernel. Make use of this to restrict accessing userspace to just
the functions that explicitly handle crossing the user kernel boundary.
Reported by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10371
The current multiboot loader code doesn't clean the metadata added to the
kernel after the bi_load64 dry run, which breaks accounting of the required
memory for the metadata.
This issue didn't show itself before because all the metadata items where small
(8bytes), but after r316343 there's a big blob in the metadata, which triggers
this. Fix it by cleaning the metadata added to the kernel after the bi_load64
dry run. Also add a comment describing the memory layout when booting using
multiboot (Xen Dom0).
This unbreaks booting a FreeBSD/Xen Dom0 after r316343.
MFC after: 3 weeks
Sponsored by: Citrix Systems R&D
