sys/dev/mpr/mpr_sas_lsi.c
sys/dev/mps/mps_sas_lsi.c
When mp[rs]sas_get_sata_identify returns
MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR, don't bother retrying. Protocol
errors aren't likely to be fixed by sleeping.
Without this change, a system that generated may protocol errors due
to signal integrity issues was taking more than an hour to boot, due
to all the retries.
Reviewed by: slm
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4553
CDAI_FLAG_NONE advanced information CCB flag.
Support for the flag was merged to stable/10 in r279329, and the
__FreeBSD_version in stable/10 was bumped to 1001510.
Check for that version in the mps(4) and mpr(4) drivers when determining
whether to use the flag.
Sponsored by: Spectra Logic
MFC after: 3 days
dates.
- Changed all of the PCI device strings from LSI to Avago Technologies (LSI).
- Added a sysctl variable to control how StartStopUnit behavior works. User can
select to spin down disks based on if disk is SSD or HDD.
- Inquiry data is required to tell if a disk will support SSU at shutdown or
not. Due to the addition of mpssas_async, which gets Advanced Info but not
Inquiry data, the setting of supports_SSU was moved to the
mpssas_scsiio_complete function, which snoops for any Inquiry commands. And,
since disks are shutdown as a target and not a LUN, this process was
simplified by basing it on targets and not LUNs.
- Added a sysctl variable that sets the amount of time to retry after sending a
failed SATA ID command. This helps with some bad disks and large disks that
require a lot of time to spin up. Part of this change was to add a callout to
handle timeouts with the SATA ID command. The callout function is called
mpssas_ata_id_timeout(). (Fixes PR 191348)
- Changed the way resets work by allowing I/O to continue to devices that are
not currently under a reset condition. This uses devq's instead of simq's and
makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function
called mpssas_prepare_tm().
- Some changes were made to reduce code duplication when getting a SAS address
for a SATA disk.
- Fixed some formatting and whitespace.
- Bump version of mps driver to 20.00.00.00-fbsd
PR: 191348
Reviewed by: ken, scottl
Approved by: ken, scottl
MFC after: 2 weeks
properly.
If there is garbage in the flags field, it can sometimes include a
set CDAI_FLAG_STORE flag, which may cause either an error or
perhaps result in overwriting the field that was intended to be
read.
sys/cam/cam_ccb.h:
Add a new flag to the XPT_DEV_ADVINFO CCB, CDAI_FLAG_NONE,
that callers can use to set the flags field when no store
is desired.
sys/cam/scsi/scsi_enc_ses.c:
In ses_setphyspath_callback(), explicitly set the
XPT_DEV_ADVINFO flags to CDAI_FLAG_NONE when fetching the
physical path information. Instead of ORing in the
CDAI_FLAG_STORE flag when storing the physical path, set
the flags field to CDAI_FLAG_STORE.
sys/cam/scsi/scsi_sa.c:
Set the XPT_DEV_ADVINFO flags field to CDAI_FLAG_NONE when
fetching extended inquiry information.
sys/cam/scsi/scsi_da.c:
When storing extended READ CAPACITY information, set the
XPT_DEV_ADVINFO flags field to CDAI_FLAG_STORE instead of
ORing it into a field that isn't initialized.
sys/dev/mpr/mpr_sas.c,
sys/dev/mps/mps_sas.c:
When fetching extended READ CAPACITY information, set the
XPT_DEV_ADVINFO flags field to CDAI_FLAG_NONE instead of
setting it to 0.
sbin/camcontrol/camcontrol.c:
When fetching a device ID, set the XPT_DEV_ADVINFO flags
field to CDAI_FLAG_NONE instead of 0.
sys/sys/param.h:
Bump __FreeBSD_version to 1100061 for the new XPT_DEV_ADVINFO
CCB flag, CDAI_FLAG_NONE.
Sponsored by: Spectra Logic
MFC after: 1 week
Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert negative values of ticks to '1'. For unsigned integer overflow we
will get sufficiently smaller timeout values than expected.
Switch from callout_reset, which requires conversion to int based ticks
to callout_reset_sbt to avoid this.
Also correct isci to correctly resolve ccb timeout.
This was based on the original work done by Eygene Ryabinkin
<rea@freebsd.org> back in 5 Aug 2011 which used a macro to help avoid
the overlow.
Differential Revision: https://reviews.freebsd.org/D1157
Reviewed by: mav, davide
MFC after: 1 month
Sponsored by: Multiplay
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
* Implements Start Stop Unit for SATA direct-attach devices in IR mode to avoid
data corruption.
* Use CAM_DEV_NOT_THERE instead of CAM_SEL_TIMEOUT and CAM_TID_INVALID
Obtained from: LSI
MFC after: 2 weeks
Idle priority is not even time-share, so if system is busy in any way,
those events may never be executed. Since in some cases system waits
for events processed by that thread, that may cause deadlocks.
TLR is necessary for reliable communication with SAS tape drives.
This was broken by change 246713 in the mps(4) driver. It changed the
cm_data field for SCSI I/O requests to point to the CCB instead of the data
buffer. So, instead, look at the CCB's data pointer to determine whether
or not we're talking to a tape drive.
Also, take the residual into account to make sure that we don't go off the
end of the request.
MFC after: 3 days
Sponsored by: Spectra Logic Corporation
mostly by adjustments to debugging printf() format specifiers. For high
numbered LUNs, also switch to printing them in hex as per SAM-5.
MFC after: 2 weeks
to not get scanned on boot.
The problem originated in change 253549. With the change to the mps(4)
driver to scan only targets that it knows it has (as opposed to scanning
the entire bus), scanning RAID volumes on boot was omitted.
So, for versions of FreeBSD that have the scanning changes
(__FreeBSD_version 1000039 and higher), scan RAID volumes that are added
whether or not we're booting.
PR: kern/181784
Reported by: Xiguang Wang <kurapica@gmail.com>
Tested by: Dennis Glatting <dg@pki2.com>
Sponsored by: Spectra Logic
Approved by: re (delphij)
MFC After: 3 days
manifested itself in out of chain frame conditions.
When the driver ran out of chain frames, the request in question
would get completed early, and go through mpssas_scsiio_complete().
In mpssas_scsiio_complete(), the negation of the CAM status values
(CAM_STATUS_MASK | CAM_SIM_QUEUED) was ORed in instead of being
ANDed in. This resulted in a bogus CAM CCB status value. This
didn't show up in the non-error case, because the status was reset
to something valid (e.g. CAM_REQ_CMP) later on in the function.
But in the error case, such as when the driver ran out of chain
frames, the CAM_REQUEUE_REQ status was ORed in to the bogus status
value. This led to the CAM transport layer repeatedly releasing
the SIM queue, because it though that the CAM_RELEASE_SIMQ flag had
been set. The symptom was messages like this on the console when
INVARIANTS were enabled:
xpt_release_simq: requested 1 > present 0
xpt_release_simq: requested 1 > present 0
xpt_release_simq: requested 1 > present 0
mps_sas.c: In mpssas_scsiio_complete(), use &= to take status
bits out. |= adds them in.
In the error case in mpssas_scsiio_complete(), set
the status to CAM_REQUEUE_REQ, don't OR it in.
MFC after: 3 days
Sponsored by: Spectra Logic
command register. The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR. Thus, the bit is no longer
a reliable indication of capability, and should not be checked. This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.
This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.
Submitted by: jhb
Reviewed by: jfv, marius, achadd, achim
MFC after: 1 day
Add a tunable that allows such a device to be excluded from the driver.
The id parameter is the target id that the driver assigns to a given device.
dev.mps.X.exclude_ids=<id>,<id>
Obtained from: Netflix
MFC after: 3 days
---------------------------------------------------------------
System panics during a Port reset with ouststanding I/O
---------------------------------------------------------------
It is possible to call mps_mapping_free_memory after this
memory is already freed, causing a panic. Removed this extra
call to mps_mappiing_free_memory and call mps_mapping_exit
in place of the mps_mapping_free_memory call so that any
outstanding mapping items can be flushed before memory is
freed.
---------------------------------------------------------------
Correct memory leak during a Port reset with ouststanding I/O
---------------------------------------------------------------
In mps_reinit function, the mapping memory was not being
freed before being re-allocated. Added line to call the
memory free function for mapping memory.
---------------------------------------------------------------
Use CAM_SIM_QUEUED flag in Driver IO path.
---------------------------------------------------------------
This flag informs the XPT that successful abort of a CCB
requires an abort ccb to be issued to the SIM. While
processing SCSI IO's, set the CAM_SIM_QUEUED flag in the
status for the IO. When the command completes, clear this
flag.
---------------------------------------------------------------
Check for CAM_REQ_INPROG in I/O path.
---------------------------------------------------------------
Added a check in mpssas_action_scsiio for the In Progress
status for the IO. If this flag is set, the IO has already
been aborted by the upper layer (before CAM_SIM_QUEUED was
set) and there is no need to send the IO. The request will
be completed without error.
---------------------------------------------------------------
Improve "doorbell handshake method" for mps_get_iocfacts
---------------------------------------------------------------
Removed call to get Port Facts since this information is
not used currently.
Added mps_iocfacts_allocate function to allocate memory
that is based on IOC Facts data. Added mps_iocfacts_free
function to free memory that is based on IOC Facts data.
Both of the functions are used when a Diag Reset is performed
or when the driver is attached/detached. This is needed in
case IOC Facts changes after a Diag Reset, which could
happen if FW is upgraded.
Moved call of mps_bases_static_config_pages from the attach
routine to after the IOC is ready to process accesses based
on the new memory allocations (instead of polling through
the Doorbell).
---------------------------------------------------------------
Set TimeStamp in INIT message in millisecond format Set the IOC
---------------------------------------------------------------
---------------------------------------------------------------
Prefer mps_wait_command to mps_request_polled
---------------------------------------------------------------
Instead of using mps_request_polled, call mps_wait_command
whenever possible. Change the mps_wait_command function to
check the current context and either use interrupt context
or poll if required by using the pause or DELAY function.
Added a check after waiting 50mSecs to see if the command
has timed out. This is only done if polliing, the msleep
command will automatically timeout if the command has taken
too long to complete.
---------------------------------------------------------------
Integrated RAID: Volume Activation Failed error message is
displayed though the volume has been activated.
---------------------------------------------------------------
Instead of failing an IOCTL request that does not have a
large enough buffer to hold the complete reply, copy as
much data from the reply as possible into the user's buffer
and log a message saying that the user's buffer was smaller
than the returned data.
---------------------------------------------------------------
mapping_add_new_device failure due to persistent table FULL
---------------------------------------------------------------
When a new device is added, if it is determined that the
device persistent table is being used and is full, instead
of displaying a message for this condition every time, only
log a message if the MPS_INFO bit is set in the debug_flags.
Submitted by: LSI
MFC after: 1 week
Add a PIM_NOSCAN flag to the CAM path inquiry CCB. This tells CAM
not to perform a rescan on a bus when it is registered.
We now use this flag in the mps(4) driver. Since it knows what
devices it has attached, it is more efficient for it to just issue
a target rescan on the targets that are attached.
Also, remove the private rescan thread from the mps(4) driver in
favor of the rescan thread already built into CAM. Without this
change, but with the change above, the MPS scanner could run before
or during CAM's initial setup, which would cause duplicate device
reprobes and announcements.
sys/param.h:
Bump __FreeBSD_version to 1000039 for the inclusion of the
PIM_RESCAN CAM path inquiry flag.
sys/cam/cam_ccb.h:
sys/cam/cam_xpt.c:
Added a PIM_NOSCAN flag. If a SIM sets this in the path
inquiry ccb, then CAM won't rescan the bus in
xpt_bus_regsister.
sys/dev/mps/mps_sas.c
For versions of FreeBSD that have the PIM_NOSCAN path
inquiry flag, don't freeze the sim queue during scanning,
because CAM won't be scanning this bus. Instead, hold
up the boot. Don't call mpssas_rescan_target in
mpssas_startup_decrement; it's redundant and I don't
know why it was in there.
Set PIM_NOSCAN in path inquiry CCBs.
Remove methods related to the internal rescan daemon.
Always use async events to trigger a probe for EEDP support.
In older versions of FreeBSD where AC_ADVINFO_CHANGED is
not available, use AC_FOUND_DEVICE and issue the
necessary READ CAPACITY manually.
Provide a path to xpt_register_async() so that we only
receive events for our own SCSI domain.
Improve error reporting in cases where setup for EEDP
detection fails.
sys/dev/mps/mps_sas.h:
Remove softc flags and data related to the scanner thread.
sys/dev/mps/mps_sas_lsi.c:
Unconditionally rescan the target whenever a device is added.
Sponsored by: Spectra Logic
MFC after: 1 week
sys/dev/mps/mps_user.c
Fix uninitialized memory reference in mps_read_config_page. It was
referencing a field (params->hdr.Ext.ExtPageType) that would only be
set when reading an Extended config page. The symptom was that
MPSIO_READ_CFG_PAGE ioctls would randomly fail with
MPI2_IOCSTATUS_CONFIG_INVALID_PAGE errors. The solution is to
determine whether an extended or an ordinary config page is requested
by looking at the PageType field, which should be available regardless.
Similarly, mps_user_read_extcfg_header and mps_user_read_extcfg_page,
which call mps_read_config_page, had to be fixed to always set the
PageType field. They were implicitly assuming that
mps_read_config_page always operated on Extended pages.
Reviewed by: ken
Approved by: ken (mentor)
MFC after: 3 days
Stop abusing xpt_periph in random plases that really have no periph related
to CCB, for example, bus scanning. NULL value is fine in such cases and it
is correctly logged in debug messages as "noperiph". If at some point we
need some real XPT periphs (alike to pmpX now), quite likely they will be
per-bus, and not a single global instance as xpt_periph now.
unmapped I/O. That one exception is access to INQUIRY VPD request result.
Those requests are never unmapped now, but to be safe add respective check
there and allow unmapped I/O for the SIM by setting PIM_UNMAPPED flag.
every architecture's busdma_machdep.c. It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code. The MD busdma is then given a chance to do any final processing
in the complete() callback.
The cam changes unify the bus_dmamap_load* handling in cam drivers.
The arm and mips implementations are updated to track virtual
addresses for sync(). Previously this was done in a type specific
way. Now it is done in a generic way by recording the list of
virtuals in the map.
Submitted by: jeff (sponsored by EMC/Isilon)
Reviewed by: kan (previous version), scottl,
mjacob (isp(4), no objections for target mode changes)
Discussed with: ian (arm changes)
Tested by: marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
- remove special handling of zero length transfers in mpi_pre_fw_upload();
- add missing MPS_CM_FLAGS_DATAIN flag in mpi_pre_fw_upload();
- move mps_user_setup_request() call into proper place;
- increase user command timeout from 30 to 60 seconds;
- avoid NULL dereference panic in case of firmware crash.
Set max DMA segment size to 24bit, as MPI SGE supports it.
Use mps_add_dmaseg() to add empty SGE instead of custom code.
Tune endianness safety.
Reviewed by: Desai, Kashyap <Kashyap.Desai@lsi.com>
Sponsored by: iXsystems, Inc.
