Secondary stack calculation is modified to provide
stack_top = secondary_stacks + (cpu_id) * PAGE_SIZE * KSTACK_PAGES
because on ARM64 the stack grows to lower memory addresses.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3107
Previous DMAP size was too small for systems with more than 64GB
of RAM. Increase it to 128GB to support ThunderX CRB.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3113
If KSTACK_PAGES was changed to anything alse than the default,
the value from param.h was taken instead in some places and
the value from KENRCONF in some others. This resulted in
inconsistency which caused corruption in SMP envorinment.
Ensure all places where KSTACK_PAGES are used the opt_kstack_pages.h
is included.
The file opt_kstack_pages.h could not be included in param.h
because was breaking the toolchain compilation.
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3094
This commit adds proper cache and shareability attributes to
the TCR register.
Set memory attributes to Normal, outer and inner cacheable WBWA.
Set shareability to inner and outer shareable when SMP is enabled.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3093
Identify current CPU. This is necessary to setup
affinity registers and to provide support for
runtime chip identification.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3095
Call arm_init_secondary before any other PIC-related functions
are called. This is necessary for GICv3 where PIC_INIT_SECONDARY
allocates resources needed for all further operations.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3066
On ARMv8 IPIs are mapped to 0-15. Incrementing the number by 16
is wrong, because it sets a reserved bit in the IPI register.
This patch removes all "+16" to comply with specs.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3029
ACPI driver requires special functions to be provided by machdep code.
Add temporary stubs to satisfy the compiler when both "pci" and "acpi"
are enabled in the kernel configuration file.
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3028
and psci to start them. I expect ACPI support to be added later.
This has been tested on qemu with 2 cpus as that is the current value of
MAXCPUS. This is expected to be increased in the future as FreeBSD has
been tested on 48 cores on the Cavium ThunderX hardware.
Partially based on a patch from Robin Randhawa from ARM.
Approved by: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3024
include this file without first including the headers needed for uint32_t
and the like use the __foo type.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
This commit reworks the code responsible for identification of
the CPUs during runtime.
It is necessary to provide a way for workarounds and erratums
to be applied only for certain HW versions.
The copy of MIDR is now stored in pcpu to provide a fast and
convenient way for assambly code to read it (pcpu is used quite often
so there is a chance it's inside the cache).
The MIDR is also better way of identification than using user-friendly
cpu_desc structure, because it can be compiled into comparision of
single u32 with only one access to the memory - this is crucial
for some erratums which are called from performance-critical
places.
Changes in cpu_identify makes this function safe to be called
on non-boot CPUs.
New function CPU_MATCH was implemented which returns boolean
value based on mathing masked MIDR with chip identification.
Example of usage:
printf("is thunder: %d\n", CPU_MATCH(CPU_IMPL_MASK | CPU_PART_MASK,
CPU_IMPL_CAVIUM, CPU_PART_THUNDER, 0, 0));
printf("is generic: %d\n", CPU_MATCH(CPU_IMPL_MASK | CPU_PART_MASK,
CPU_IMPL_ARM, CPU_PART_FOUNDATION, 0, 0));
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3030
provide a semantic defined by the C11 fences with corresponding
memory_order.
atomic_thread_fence_acq() gives r | r, w, where r and w are read and
write accesses, and | denotes the fence itself.
atomic_thread_fence_rel() is r, w | w.
atomic_thread_fence_acq_rel() is the combination of the acquire and
release in single operation. Note that reads after the acq+rel fence
could be made visible before writes preceeding the fence.
atomic_thread_fence_seq_cst() orders all accesses before/after the
fence, and the fence itself is globally ordered against other
sequentially consistent atomic operations.
Reviewed by: alc
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Add ARM ITS (Interrupt Translation Services) support required
to bring-up message signalled interrupts on some ARM64 platforms.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
them when a different thread last used them, or when the thread was last
run on a different cpu.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
On other architectures floatingpoint.h is a symlink to
machine/floatingpoint.h which in turn includes machine/ieeefp.h.
Do this on arm64 as well for now.
Sponsored by: The FreeBSD Foundation
register bits. Nothing in base uses these as they are deprecated, however
third-party applications, such as perl, expect some of these functions to
exist.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
drivers, one for fdt, one for acpi. It then uses this to decide if it will
use fdt or acpi.
The GICv2 (interrupt controller) and Generic Timer drivers have been
updated to handle both cases.
As this is early code we still need FDT to find the kernel console, and
some parts are still missing, including PCI support.
Differential Revision: https://reviews.freebsd.org/D2463
Reviewed by: jhb, jkim, emaste
Obtained from: ABT Systems Ltd
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Using plain dsb()/dmb() as full system barriers is usually to much.
Adding proper options to those barriers (instead of full system - sy)
will most likely reduce the cost of the instructions and will benefit
in performance improvement.
This commit adds options to barrier macro definitions.
Obtained from: Semihalf
Reviewed by: andrew, ian
Sponsored by: The FreeBSD Foundation
before adjusting it to store any registers. This is needed as DTrace may
need to adjust the kernel stack pointer, and previously the new stack
pointer would have needed to be checked incase it was changed.
The replacement started at r283088 was necessarily incomplete without
replacing boolean_t with bool. This also involved cleaning some type
mismatches and ansifying old C function declarations.
Pointed out by: bde
Discussed with: bde, ian, jhb
needs to be enabled by adding "kern.racct.enable=1" to /boot/loader.conf.
Differential Revision: https://reviews.freebsd.org/D2407
Reviewed by: emaste@, wblock@
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
GICv3 allows to distribute interrupts to more than 8 cores served by
the previous GIC revisions. GICv3 introduces additional logic in form
of Re-Distributors associated with particular CPUs to determine
the highest priority interrupts and manage PPIs and LPIs
(Locality-specific Peripheral Interrupts). Interrupts routing is
based on CPUs' affinity numbers. CPU interface was changed to be
accessible via CPU System Registers and this is the preferred
(and supported) method in this driver.
Obtained from: Semihalf
Reviewed by: andrew, emaste, ian, imp
Sponsored by: The FreeBSD Foundation
The x86 busdma subsystem allows using multiple implementations.
By default the classic bounce buffer approach is used, however
on systems with IOMMU it could be in runtime switched to more
efficient hardware accelerated implementation.
This commit adds ARM64 port of the x86 busdma framework and bounce
buffer backend. It is ready to use on IO coherent systems. If the
IO coherency cannot be guaranteed, the cache management operations have
to be added to this code in places marked by /* XXX ARM64TODO (...) */
comments. Also IOMMU support might be added by registering another
busdma implementation like it is already done on the x86.
Reviewed by: andrew, emaste
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
