d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
162,525 Commits 6 Branches 133 Tags 2.6 GiB
b39c47d922
Commit Graph

162525 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Adrian Chadd
b39c47d922 Don't do Kite antenna switch selection this way (for now); antenna 
diversity is done elsewhere now.
 2011-04-16 13:47:17 +00:00
Bernhard Schmidt
5fd12c76a8 Rename some stuff in favour of the OpenBSD names: 
- prefer EDCA over WME
- qid for a TXQ ID
- reg for register values
 2011-04-16 13:40:32 +00:00
Bernhard Schmidt
4e61a8e57c Fix WME/QoS handling: 
- move the TX queue selection into iwn_tx_data/iwn_tx_data_raw
- extract traffic identifier and use it
- do not expect ACKs for frames marked as such
 2011-04-16 13:25:19 +00:00
Bernhard Schmidt
baa8b4ad20 Remove if_ierrors which do not necessarily indicate a RX error, also 
do account send packets. While here use the IWN_TX_FAIL constant.
 2011-04-16 13:12:12 +00:00
Adrian Chadd
52d84465a2 Disable classic-style fast diversity on the AR5416 and later. 
Antenna diversity on the >= AR5416 is implemented differently than the
AR5212 and previous chips. So for now, and not to confuse things, just
disable it for now.
 2011-04-16 12:46:46 +00:00
Bernhard Schmidt
3096855e8c Instead of hardcoding TX rates and using that to fill the retry table 
use the neogotiated ni_rates instead.
 2011-04-16 12:42:54 +00:00
Adrian Chadd
18a3a3309f Remove some duplicate code from the AR9285 TX power configuration path. 2011-04-16 11:59:37 +00:00
Rebecca Cran
39c60b6cff Remove missing include directory in preparation for adding 
-Wmissing-include-dirs to CWARNFLAGS.
 2011-04-16 11:15:57 +00:00
Bernhard Schmidt
7223fe84f2 Replace RX/TX ring allocation error messages with something more sane 
and remove those where the caller already prints one.
 2011-04-16 11:14:42 +00:00
Bernhard Schmidt
0df53de1c3 Prevent double-free, also use the same error codes as OpenBSD. 2011-04-16 11:11:22 +00:00
Bernhard Schmidt
47c2ecefcc Add missing bus_dmamap_sync calls as well as remove two duplicate ones. 
Obtained from:	OpenBSD
 2011-04-16 10:52:11 +00:00
Bernhard Schmidt
fac0198998 Unify TX/RX ring allocation, finish the descriptior DMA stuff before 
starting with data.
 2011-04-16 10:38:27 +00:00
Bernhard Schmidt
a59641a1a4 Make sure to destroy all DMA tags and maps. 2011-04-16 10:35:02 +00:00
Bernhard Schmidt
1f43fb20f2 Rewrite DMA segment handling to be more inline with the OpenBSD code. 
Also change the m_len == 0 hack to have less code churn.
 2011-04-16 10:32:46 +00:00
Bernhard Schmidt
58e6c20852 scratch_paddr has the same address pre-assigned, use that instead. 2011-04-16 09:39:08 +00:00
Bernhard Schmidt
f75e83846a In case a new mbuf can't be loaded, reuse the old one. 2011-04-16 09:34:40 +00:00
Bernhard Schmidt
3f01dc2d9d OpenBSD uses IWN_RBUF_SIZE not MJUMPAGESIZE for the RX path, also replace 
caddr_t with void * to be in sync.
 2011-04-16 08:59:21 +00:00
Bernhard Schmidt
5c222f4bc8 Remove the flags argument of iwn_dma_contig_alloc(), it is always set 
as BUS_DMA_NOWAIT. While here also set BUS_DMA_COHERENT.
 2011-04-16 08:57:17 +00:00
Jaakko Heinonen
9b92242710 Move a comment to the right place. The rearrange done in r208928 left 
the comment to a wrong place.
 2011-04-16 08:38:11 +00:00
Bernhard Schmidt
65aa0234f0 RSSI related syncs with the OpenBSD code: 
- read RSSI only for the active chains
- cast RSSI/NF to int8_t before passing it up to radiotap
- remove the htole64() for the timestamp

Obtained from:	OpenBSD
 2011-04-16 07:32:57 +00:00
Bernhard Schmidt
1eccdf31c1 Pass errors that might happen during state transitions up to net80211. 2011-04-16 07:21:00 +00:00
Bernhard Schmidt
c2c3b03223 Obtain the channel number directly from the laster RXON command, also 
chan is an uint8_t.
 2011-04-16 07:17:03 +00:00
Jaakko Heinonen
e9b3fc67e0 Move TUNABLE_INT_FETCH() out of the SIM lock to avoid sleeping while 
holding the lock. The fix is analogous to r220618 for ada(4).

Reviewed by:	mav
 2011-04-16 06:54:41 +00:00
Yoshihiro Takahashi
59707f16bd MFi386: revisions 220389 and 220392 
- Mark getc() as inline, this has no effect on gcc but helps clang.
  - Move getc() body before xgetc() so gcc does not emit a warning about
    function having no body.
 2011-04-16 06:20:49 +00:00
Rick Macklem
7b8c319be4 Change the experimental NFS client so that it creates nfsiod 
threads in the same manner as the regular NFS client after
r214026 was committed. This resolves the lors fixed by r214026
and its predecessors for the regular client.

Reviewed by:	jhb
MFC after:	2 weeks
 2011-04-15 23:07:48 +00:00
Jung-uk Kim
79d924a9aa Purge _USE_BERKELEY_YACC definition from Makefile. This ugly hack is no 
long necessary for us since r220680.
 2011-04-15 21:47:10 +00:00
Jung-uk Kim
33a7ed1f45 Re-merge with ACPICA vendor source. 2011-04-15 21:38:24 +00:00
Jung-uk Kim
848049e223 Redo r220658. More extensive patch was committed by Intel: 
http://git.moblin.org/cgit.cgi/acpica/commit/?id=16c9bbd6a3d8da88664d769ceec2f1757964fc7a

Obtained from:	ACPICA
 2011-04-15 21:33:45 +00:00
Bernhard Schmidt
f6bb3360b6 fix the order of the prototypes from the previosu commit 2011-04-15 20:40:49 +00:00
Bernhard Schmidt
89a84499e4 The 6005 series devices need additional temperature offset calibration 
as well as the IWN_GP_DRIVER_CALIB_VER6 bit set.

Obtained from:	OpenBSD
 2011-04-15 20:35:15 +00:00
Bernhard Schmidt
083e216732 Revert some of local calibration changes in favour of the OpenBSD 
implementation. This includes the fix required for the 6050 series
devices.
 2011-04-15 20:31:02 +00:00
Bernhard Schmidt
518e267e38 remove debug left-overs 2011-04-15 20:19:18 +00:00
Bernhard Schmidt
af2e228dc4 Split up watchdog and calibration callout. This allows us to use different 
timing on both and to remove some monitor mode specific hacks (which has
no calibration).
 2011-04-15 20:17:52 +00:00
Jung-uk Kim
d052a1cc33 Merge ACPICA 20110413. 2011-04-15 18:34:27 +00:00
Bernhard Schmidt
16b483cb8d Split out bluetooth coexistence setup. 2011-04-15 17:10:52 +00:00
Bernhard Schmidt
b558f70709 Fixes for firmware handling: 
- there is a local variable for sc->fw_dma, use that instead
- OpenBSD uses 5*hz to wait for firmware to be loaded
- in case the firmware module contains invalid data, actually release it
 2011-04-15 16:59:56 +00:00
Bernhard Schmidt
a7387751dd Only handle beacon misses while in RUN state and not scanning. 2011-04-15 16:55:45 +00:00
Bernhard Schmidt
69e775c384 Don't timeout when stopping DMA channels. 
Obtained from:	OpenBSD
 2011-04-15 16:50:37 +00:00
Jung-uk Kim
b8b782f913 Fix build on FreeBSD. This patch was submitted upstream: 
http://lists.acpica.org/pipermail/devel/2011-April/000253.html

Similar fixes will show up in the next ACPICA release.
 2011-04-15 16:44:04 +00:00
Alexander Motin
06ccfe1dd7 Some changes around hot-plug and interface power-management: 
- use ATA_SE_EXCHANGED (SError.DIAG.X) bit to detect hot-plug events when
power-management enabled and ATA_SE_PHY_CHANGED (SError.DIAG.N) can't be
trusted;
 - on controllers supporting staggered spin-up (SS) put unused channels
into Listen state instead of Off. It should still save some power, but
allow plug-in events to be detected;
 - on controllers supporting cold presence detection (CPD), when power
management enabled, use CPD events to detect hot-plug in addition to PHY
events.
 2011-04-15 16:40:31 +00:00
Jilles Tjoelker
1e5dccaa9b sh: Add test for bin/12137. 2011-04-15 15:33:24 +00:00
Jilles Tjoelker
9638724dc8 sh: Add test for obscure and ambiguous ${#?}. 2011-04-15 15:26:05 +00:00
Jilles Tjoelker
149cf1e03b sh: Add test for bin/56147. 2011-04-15 15:14:58 +00:00
Philip Paeps
b0321bb1e7 Add basic support for the Marvell Orion TS-7800. 
Submitted by:	Kristof Provost <kristof -at- freebsd.org>
 2011-04-15 13:37:43 +00:00
Gavin Atkinson
47bae5fd09 Remove an incorrect be16toh() that prevented geom_part_apm from working on 
little-endian machines.

Reviewed by:	marcel
MFC after:	2 weeks
 2011-04-15 12:32:52 +00:00
Alexander Motin
c3d0d168ae Make ada(4) driver put ATA disks into sleep state on suspend. 
Submitted by:	jkim (original version)
 2011-04-15 07:07:29 +00:00
Navdeep Parhar
2be67d2948 Fix a couple of bad races that can occur when a cxgbe interface is taken 
down.  The ingress queue lock was unused and has been removed as part of
these changes.

- An in-flight egress update from the SGE must be handled before the
  queue that requested it is destroyed.  Wait for the update to arrive.

- Interrupt handlers must stop processing rx events for a queue before
  the queue is destroyed.  Events that have not yet been processed
  should be ignored once the queue disappears.

MFC after:	1 week
 2011-04-15 03:09:27 +00:00
Rick Macklem
a09001a82b Fix the experimental NFSv4 server so that it uses VOP_PATHCONF() 
to determine if a file system supports NFSv4 ACLs. Since
VOP_PATHCONF() must be called with a locked vnode, the function
is called before nfsvno_fillattr() and the result is passed in
as an extra argument.

MFC after:	2 weeks
 2011-04-14 23:46:15 +00:00
Jung-uk Kim
4a8fa6fe58 Add event handlers for (ACPI) suspend/resume events. Suspend event handlers 
are invoked right before device drivers go into sleep state and resume event
handlers are invoked right after all device drivers are waken up.
 2011-04-14 22:17:39 +00:00
Jilles Tjoelker
3472288282 getfh(2): Add xrefs for fhopen(2), open(2), stat(2). 
MFC after:	1 week
 2011-04-14 22:06:11 +00:00