FAT32 partition with LBA addressing.
Reviewed by: marcel
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15266
GPUs often have a VGA PCI class code and are probed/attached
by the VGA driver. Allow them to be detached so they can
be presented as passthru devices to VM guests.
Submitted by: mmacy
Reviewed by: jhb, imp, rgrimes
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15269
ifuncs on x86.
Also keep helpers to define 'pseudo-ifuncs' which are emulated by the
indirect jmp.
Reviewed by: jhb (previous version, as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D13838
Required MD bits are only provided for x86.
Reviewed by: jhb (previous version, as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D13838
The 4.16 DTS import brought in emac support for the a83t. Since these
boards' DTS is pulled from /boot and I forgot to hook these up to the build,
they should be fairly safe to go away.
The a83t-sid and h3-sid overlays are still relevant. a83t-sid will likely
come in with 4.18 DTS.
The rsu firmware license check has been disabled since r292756. Changes
rsu(4) since the license ack is no longer required.
While here, add `device rsufw` hint to the kernel configuration lines and
add/update paths to the installed license file in both rsu(4) and rsufw(4).
Submitted by: Mateusz Piotrowski (0mp)
Reviewed by: bcr (manpages)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D14966
Currently 'man -k iflib' would find you the right pages for iflib
documentation, namely iflibdd(9) and iflibdi(9) but 'man iflib' would leave
you in the dark. This allows both approaches to find the relevant
documentation.
Reviewed by: kmacy, shurd
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15219
Prior to this change the manual page documented ifdi_queues_alloc which has
been replaced by separate methods for tx and rx queues.
Reviewed by: kmacy, shurd
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D15218
Since the move to SMP NIC driver locking has had to go through serious
contortions using mtx around long running hardware operations. This moves
iflib past that.
Individual drivers may now sleep when appropriate.
Submitted by: Matthew Macy <mmacy@mattmacy.io>
Reviewed by: shurd
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14983
Without the suspend method the watchdog may fire in S1 state. Without
the resume method the watchdog is not re-enabled after returning from S3
state. I observe this on one of my systems.
Not sure if watchdog(4) should participate in the suspend actions.
Right now everything is up to individual drivers.
MFC after: 2 weeks
This is better behavior than just silently doing the wrong thing. We do not
currently have plans to support -r/-R with the compression-enabled greps.
Reported by: jilles
Include source files and drivers for Marvell ArmadaXP and Armada38X
in GENERIC kernel config.
Submitted by: Michal Mazur <mkm@semihalf.com>
Rafal Kozik <rk@semihalf.com>
Reviewed by: manu
Tested by: manu
Obtained from: Semihalf
Sponsored by: Stormshield
Marvell SoC identification function was called by SYSINIT on all armv7
platforms, which brakes platforms other than Marvell built with
GENERIC config. Fix this by shifting SoC identifying to Marvell platform
initialization.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: manu
Tested by: manu
Obtained from: Semihalf
Sponsored by: Stormshield
Remove line about allowed flags. It was missing 'pRTY' and is duplicative
of the man page. It didn't describe the flags in any detail to help
remind users of how to configure newsylog.
As with Clang, build our toolchain components by default when the host
compiler is capable of doing so, to make them available for testing and
experimentation.
Sponsored by: The FreeBSD Foundation
is too big for the outgoing interface and no firewall is involed.
This problem was introduced in
https://svnweb.freebsd.org/changeset/base/324996
Thanks to Irene Ruengeler for finding the bug and testing the fix.
Reviewed by: kp@
MFC after: 3 days
Remove sys/modules/ixgb and add the linked man page for if_ixgb via
ObsoleteFiles.
Submitted by: kbowling
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15273
This patch adds two missing LIST_INIT()s. Found by inspection.
In practice, these are currently no-ops, since the structure they are
in is malloc'd with M_ZERO and all LIST_INIT does is set the pointer
in the list head to NULL. (In other words, the M_ZERO has already
correctly initialized it.)
MFC after: 2 months
According to the 802.1Q-2014 9.6 VLAN Tag Control Information, VID value 0
means that there is no VLAN tag assigned to the packet, and only PCP and
DEI values from the tag are meaningful. Current flow table programming
filter out such packets.
When programming VLAN filter for flow table, unconditionally add rule which
accept packets with VLAN id 0. The packets are already handled correctly
by the network stack.
Reviewed by: hselasky, slavash
Sponsored by: Mellanox Technologies
MFC after: 1 week
Admin pass-through requests took controller lock before the queue lock,
but in case of request submission to a failed controller controller lock
was taken after the queue lock. Fix that by reducing the lock scopes and
switching to mtx_pool locks to track pass-through request completion.
Sponsored by: iXsystems, Inc.
r332839 changed number of cells per interrupt for local_intc from 1 to 2
to pass type of IRQ. Driver expected only 1 cell so after r332839
all interrupt children of local_intc failed to allocate IRQ resource.
Fix this regression by relaxing check for number of cells in interrupt
property to be either 1 or 2.
PR: 227904
Multicast incorrectly calls in to drivers with a mutex held causing drivers
to have to go through all manner of contortions to use a non sleepable lock.
Serialize multicast updates instead.
Submitted by: mmacy <mmacy@mattmacy.io>
Reviewed by: shurd, sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14969
A large number of devices don't support PCIe FLR, in particular
graphics adapters. Use PCI power management to perform the
reset if FLR fails or isn't available, by cycling the device
through the D3 state.
This has been tested by a number of users with Nvidia and AMD GPUs.
Submitted and tested by: Matt Macy
Reviewed by: jhb, imp, rgrimes
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15268
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
Current interface to the gntdev in FreeBSD is wrong, and mostly worked
out of luck before the PTI FreeBSD fixes, when kernel and user-space
where sharing the same page tables.
On FreeBSD ioctls have the size of the passed struct encoded in the
ioctl number, because the generic ioctl handler in the OS takes care
of copying the data from user-space to kernel space, and then calls
the device specific ioctl handler. Thus using ioctl structs with
variable sizes is not possible.
The fix is to turn the array of structs at the end of
ioctl_gntdev_alloc_gref and ioctl_gntdev_map_grant_ref into pointers,
that can be properly accessed from the kernel gntdev driver using the
copyin/copyout functions. Note that this is exactly how it's done for
the privcmd driver.
Sponsored by: Citrix Systems R&D
These match GNU cmp(1) for compatibility where applicable.
Future work might implement the -i option from GNU cmp(1) to express skip
either in terms of both files or of the form "SKIP1:SKIP2" rather than
specifying them as additional arguments to cmp(1).
MFC after: 1 month
a 1500 line switch statement. Callers now specify a discrete completion
handler, though they're still welcome to track state via ccb_state.
Sponsored by: Netflix
pointer. It's now unhelpful and misleading for callers to continue to set
it, so bring all callers into conformance. There's no real functional change,
but it makes reading the code a lot less confusing.
Sponsored by: Netflix
Refresh upstream driver before impending conversion to iflib.
Major changes:
- Support for descriptor writeback mode (required by ixlv(4) for AVF support)
- Ability to disable firmware LLDP agent by user (PR 221530)
- Fix for TX queue hang when using TSO (PR 221919)
- Separate descriptor ring sizes for TX and RX rings
PR: 221530, 221919
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reviewed by: #IntelNetworking
MFC after: 1 day
Relnotes: Yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D14985
Dumpers may wish to print messages from an initialization hook; this
change ensures that such messages aren't mixed with output from the
generic dump code.
MFC after: 1 week
