These controllers seem to have the same feature of AR813x/AR815x and
improved RSS support(4 TX queues and 8 RX queues). alc(4) supports
all hardware features except RSS. I didn't implement RX checksum
offloading for AR816x/AR817x just because I couldn't get
confirmation from the Vendor whether AR816x/AR817x corrected its
predecessor's RX checksum offloading bug on fragmented packets.
This change adds supports for the following controllers.
o AR8161 PCIe Gigabit Ethernet controller
o AR8162 PCIe Fast Ethernet controller
o AR8171 PCIe Gigabit Ethernet controller
o AR8172 PCIe Fast Ethernet controller
o Killer E2200 Gigabit Ethernet controller
Tested by: Many
Relnotes: yes
MFC after: 2 weeks
HW donated by: Qualcomm Atheros Communications, Inc.
from xnu sources. If we encounter a network where ICMP is blocked
the Needs Frag indicator may not propagate back to us. Attempt to
downshift the mss once to a preconfigured value.
Default this feature to off for now while we do not have a full PLPMTUD
implementation in our stack.
Adds the following new sysctl's for control:
net.inet.tcp.pmtud_blackhole_detection -- turns on/off this feature
net.inet.tcp.pmtud_blackhole_mss -- mss to try for ipv4
net.inet.tcp.v6pmtud_blackhole_mss -- mss to try for ipv6
Adds the following new sysctl's for monitoring:
-- Number of times the code was activated to attempt a mss downshift
net.inet.tcp.pmtud_blackhole_activated
-- Number of times the blackhole mss was used in an attempt to downshift
net.inet.tcp.pmtud_blackhole_min_activated
-- Number of times that we failed to connect after we downshifted the mss
net.inet.tcp.pmtud_blackhole_failed
Phabricator: https://reviews.freebsd.org/D506
Reviewed by: rpaulo bz
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Limelight Networks
cannot be sent to the chip because a prerequisite L2 resolution
failed.
Submitted by: Hariprasad at chelsio dot com (original version)
MFC after: 2 weeks.
E5372 with different product IDs.
Interestingly, the standard E5372 IDs (12d1:1506) are currently listed in
u3g.c and are the same as the E3131. However, the R215/E5372 is an NCM
device and works well with cdce(4) whereas the E3131 isn't. More work
may be needed to better identify the other device IDs.
MFC after: 1 week
events we have actually counted 'Branch Instruction Retired' when people
asked for 'Unhalted core cycles' using the 'unhalted-core-cycles' event mask
mnemonic.
Reviewed by: jimharris
Discussed with: gnn, rwatson
MFC after: 3 days
Sponsored by: DARPA/AFRL
This gets rid of the following error message during FreeBSD guest bootup:
"vtbd0: hard error cmd=flush fsbn 0"
Reported by: rodrigc
Reviewed by: grehan
FreeBSD has ARC_BUFC_NUMMETADATALISTS metadata lists and ARC_BUFC_NUMDATALISTS
data lists (currently both are 16) while illumos has just a single list
of each kind.
headroom determines how much data is scanned on a single list
during each run of the l2arc feed thread.
Because FreeBSD has more lists we proportionally decrease the limit.
Reviewed by: Brendan Gregg (earlier version)
MFC after: 2 weeks
Sponsored by: HybridCluster
FreeBSD has ARC_BUFC_NUMMETADATALISTS metadata lists and ARC_BUFC_NUMDATALISTS
data lists (currently both are 16) while illumos has just a single list
of each kind.
L2ARC_WRITE_SIZE determines the default value of l2arc_write_max which
defines limits on how much data is scanned and written to a cache device
during each run of the l2arc feed thread. The limits are applied on the
per buffer list basis.
Because FreeBSD has more lists we proportionally reduce the limits.
Reviewed by: Brendan Gregg (earlier version)
MFC after: 2 weeks
Sponsored by: HybridCluster
POSIX treats negative time_t as undefined (i.e. may be valid too,
depends on system's policy we don't have) and we don't set EOVERFLOW
in mktime/timegm as POSIX requires to surely distinguish -1 return
as valid negative time from -1 as error return.
one to, for example, access the "provider" field of a struct g_consumer,
even though "provider" is a D keyword.
PR: 169657
MFC after: 2 months
Discussed with: Bryan Cantrill
Sponsored by: EMC / Isilon Storage Division
The hypervisor hides the MONITOR/MWAIT capability by unconditionally setting
CPUID.01H:ECX[3] to 0 so the guest should not expect these instructions to
be present anyways.
Discussed with: grehan
configuration value is an integer count of seconds, it is not a timeval.
Using memcpy() to copy a timeval from it put garbage into the tv_usec
field.
PR: 194025
Submitted by: David Shane Holden <dpejesh@yahoo.com>
MFC after: 1 week
run directly on netmap ports using netmap:foo or valeXX:YY device names.
Modifications to existing code are small and trivial, the netmap-specific
code is all in a new file.
Please be aware that in netmap mode the physical interface is disconnected from
the host stack, so libpcap will steal the traffic not just make a copy.
For the full version of the code (including linux and autotools support) see
https://code.google.com/p/netmap-libpcap/
MFC after: 3 days
use calloc in get_line() when allocating line to ensure it is fully initialized,
fixes a later uninitialized value in copy_param() (FreeBSD #193499).
PR: 193499
Submitted by: Thomas E. Dickey <tom@invisible-island.net>
Before this change target could send R2T request for write transfer of any
size, that could violate iSCSI RFC, which allows initiator to limit maximum
R2T size by negotiating MaxBurstLength connection parameter.
Also report an error in case of write underflow, when initiator provides
less data than initiator expects. Previously in such case our target
sent R2T request for non-existing data, violating the RFC, and confusing
some initiators. SCSI specs don't explicitly define how write underflows
should be handled and there are different oppinions, but reporting error
is hopefully better then violating iSCSI RFC with unpredictable results.
MFC after: 2 weeks
we can't easily predict (in current parsing model)
if the keyword is ipfw(8) reserved keyword or port name.
Checking proto database via getprotobyname() consumes a lot of
CPU and leads to tens of seconds for parsing large ruleset.
Use list of reserved keywords and check them as pre-requisite
before doing getprotobyname().
Obtained from: Yandex LLC
It was found that VirtualBox' AHCI does not allow nterrupt to be cleared
before the interrupt status register is read, causing interrupt storm.
AHCI specification allows to skip this register use when multi-vector MSI
is enabled and so interrupting port is known. For single-vector MSI that
is not stated explicitly, but if the port is only one, it is obviously
known too.
